887 Gd&T Jobs - Page 33

What You’ll Do "We are looking forward to onboard Engineer Mechanical - VAVE, who will be required to work on VAVE project execution in Fire Business in Electrical Sector, Life Safety division. Primary work will include - Execute VAVE/ Cost out projects from Idea to implementation. Design mechanical components & assemblies to reduce the overall cost of ownership to Eaton. Collaborate with global stakeholders, global engineering team for project execution through idea generation, design, testing and implementation phase." " Contribute & lead Idea generation events to build project pipeline with help of Tech. leads, SMEs and global stakeholders. Perform teardown, generate ideas, perform system/ component sizing, modeling, and simulation to meet product design and compliance requirements. Develop understanding on requirements, VOC, compliance standards and draw approproate conclusion from the available information in a timely fasion Develop understanding of both technology and products of EL & Fire portfolio including understanding on regulatory requirements such as IEC,UL,CSA, NEMA standards, design considerations, system interactions, application and constraints. Evaluate ideas to estimate the potential savings, build business case, required resources, timeline and allign with stakeholders for approvals. Design/modify 3D models, drawings & BOM of Emeergency Luminaries, Power systems & Panels componenent/assemblies Lead projects individually as project owner. Drive regular followup meetings to provide periodic update on Project status, challanges, changes and impact. Assess test results, perform root cause analysis through test findings/failures and take corrective/preventive actions Support suppliers in resolving DFM related challanges and queries to provide quotes and prototypes. Will be responsible for execution of the project and support activities like Production feasibility assessment and Part production approval process (PPAP)." Qualifications BE / M Tech - Mechanical Engineering "Required: 3-6 Years of total experience 3+ years of experience in VAVE/ Cost out projects on Sheetmetal, Plastic products." Skills " Proven knowledge and experience on VAVE/ Cost out project execution with devloped VAVE mindset, also should be capable to work on NPI/ Sustaining projects as needed. Experties in design of Plastic & Sheetmetal components and assemblies. Knowledge on design of Cast, Forged and Machined parts. Strong ability to implement GD&T, drafting standards & mechanical design processes Strong knowledge on manufacturing processes, materials, cost and latest technolgies in manufacturing of mechanical components and prototyping techniques. Knowledge on identifying requirements & develope test plan from standards in accordance to IEC/UL/CSA/CCC codes. Knowledge of DFSS methodology & experince in using various tools like Concept tarde-off, PDSC, DFMEA, DVP etc. Understinding & experince in reviewing structural/thermal/CFD/MBD, moldflow, reliability analysis reports to draw appropriate conclusion. Knowledge on PLM systems (Enovia , SAP) and change management processes ECR/ECO. Hands on experience in CAD tools - SolidWorks & Creo. Shall be capable to preapre project plan by connecting with multiple functions like SCM, quality & production department. Basic Knowledge on electronics/ hardware components." Excellent verbal and written communication skills, Self-driven with high degree of aptitude, Problem solving skills, Team player, Ability to work in global and virtual environment ]]>

What You’ll Do We are seeking a motivated individual with strong skills in plastic and Sheet metal modeling and detailed drawing for the product development of HMI based system. The candidate will be working with a team of mechanical engineers towards design and development of global electronic instrumentation products. Candidate will be responsible for Concept development, perform DFM, design reviews, develop prototype and update project progress periodically. Success in this position requires effective collaboration, a strong drive to achieve project objectives, and the ability to learn new techniques, tools, and processes for the product development cycle. Key Requirements Design and develop various products to meet customer requirements, cost targets, and market-related technology.Experience in Research/NPI/Sustaining projects for Display unit, HMI machines or similar products.Complete system/component sizing, designing, simulation, and testing validation to industrialization.Design parts and products considering design for manufacturing and assembly, applying thorough understanding and experience of plastic injection molding, sheet metal, casting, machining processes, and tooling considerations.Conduct engineering analysis for innovative and robust product development.Take technical ownership of subsystems or modules of the project, ensuring product compliance with global standards or other relevant compliance standards.Modify existing products to support customer, manufacturing, regulatory, and market requirements through the Change Management process.Strong oral and written communication skills.Strong interpersonal and leadership skills. Key Responsibilities Experience in Research/NPI/Sustaining projects for Display unit, HMI machines or similar products.Expertise in plastic and sheet metal part design, mechanism design, and system integration.Knowledge and experience with plastic materials, their properties, and requirements.Creates CAD models, including part and assembly drawings, Bill of Materials (BOMs) to support manufacturing, testing and assembly.Proficiency in GD&T principles and clearance & creepage calculations.Experience with various manufacturing processes for contacts and plastic materials (bending, riveting, welding, brazing, injection molding).Review reliability predictions and be conversant with Design Failure Modes and Effects Analysis (DFMEA) and structural/thermal/CFD/MBD results.Complete detailed design (2D drawings/3D models) in SolidWorksWill anticipate areas such as thermal loading, mechanical stress, and vibration resonances in a designKnowledge of PLM systems (Enovia, SAP) is desirable. Should have an innovative mindset with a proven track record of innovation and product launchesWork with other functional teams such as Certification, Manufacturing & Process teams on early track to synchronize product development. Qualifications B.E. / M.Tech. (Mechanical Engineering)7 to 9 years of experience in Plastic and Sheet metal design Skills Experience in NTI/NPI/Sustaining projects for industrial products such as Display unit, HMI machines or similar productsIn-depth knowledge of injection molding, sheet metal, material selection, tooling, and manufacturing processes.Thorough understanding of IEC/IEEE standards, UL certification, 3D modeling, PLM, and ERP systems.Experience in deploying DFSS tools for robust design.Extensive experience with product design, sustenance, cost reduction, and agile methodologiesDrive for Results, Passionate, Collaborative, Excellent written and verbal communication skills needed & with Digital Mindset ]]>

Job Overview TE Connectivitys R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise include: materials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Roles and Responsibilties: ROLE OBJECTIVE Responsible for Power Solution product development, which is majorly used for data communication or Hyperscale computers. Provide customer innovation solutions as well as manage the engineer documents following TE system procedure. RESPONSIBILITIES Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications. Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution & Sustenance till product end of life) Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer. Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained. Develop and manage product documentation, including product requirements, design documents, and test plans/reports. Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives. Work closely with suppliers to identify and qualify new components and technologies. Conduct thorough design verification and validation testing to ensure the product meets the required specifications. Collaborate with manufacturing teams to ensure a smooth transition to production. Mentor and guide junior engineers and technicians to develop their skills and knowledge. Conduct competitive analysis and market research to identify opportunities for innovation and differentiation. Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams. Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers expectations. Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification. Introduce breakthrough technologies by partnering technically with our customers worldwide and with our TE Global competency centers to enhance business revenue & growth. Apply engineering best practices to reduce cost and sustain existing products to meet customers cost targets. Education/Knowledge: Bachelor's or Master's degree in Mechanical or Electrical Engineering. Strong understanding of mechanical and electrical engineering principles. Experience with product development processes, including design, prototyping, and testing. Strong problem-solving skills and ability to work independently or as part of a team. Excellent written and verbal communication skills. Experience with data center technology and connectors/cable assembly is a plus. Project management skills and ability to manage multiple projects simultaneously. Knowledge about various phases of product realization and product development Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modeling, Geometric Dimension & Tolerancing (GD&T), electrical & electronic design, and Simulation Knowledge of manufacturing process (machining, molding, stamping, plating, etc.) Knowledge of material (metal/plastic) properties will be a plus. Familiarity with quality tools (FMEA, 6sigma, DOE, 8D) will be a plus. Critical Experience: Minimum of 8 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related. This highly technical position requires an individual who can work independently. Experience in product compliance certification ( Product, Safety, Environmental substance control) Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM). Capability and experience in presentation on products, solutions, and technologies. Previous experience in working in high-performing multi-disciplinary global engineering teams. COMPETENCIES Technical capabilities: Expert functional/domain knowledge Application Engineering: Ability to understand customer requirements & offer engineering solutions Engineering management across cross-functional teams: Developing technical roadmaps to align with market direction & communicating it across business units, management & customers to share applicable technology Working together with the global team. Optimizing engineering & innovation: Defining & managing IP strategy & constantly improving products through R&D Building people capability: Training and mentoring engineers with the necessary skill set, assuring succession & workforce planning & organizational capability Quality controller: Ability to assure quality for services, labels & labs

Role Objective: Responsible for Power Solution product development, which is majorly used for data communication or Hyperscale computers. Provide customer innovation solutions as well as manage the engineer documents following TE system procedure. RESPONSIBILITIES Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications. Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution & Sustenance till product end of life) Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer. Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained. Develop and manage product documentation, including product requirements, design documents, and test plans/reports. Work with global manufacturing resources, procurement, and outside suppliers to meet all TE technical, quality, and cost objectives. Work closely with suppliers to identify and qualify new components and technologies. Conduct thorough design verification and validation testing to ensure the product meets the required specifications. Collaborate with manufacturing teams to ensure a smooth transition to production. Mentor and guide junior engineers and technicians to develop their skills and knowledge. Conduct competitive analysis and market research to identify opportunities for innovation and differentiation. Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams. Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers expectations. Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification. Introduce breakthrough technologies by partnering technically with our customers worldwide and with our TE Global competency centers to enhance business revenue & growth. Apply engineering best practices to reduce cost and sustain existing products to meet customers cost targets. Mandate Skills: Bachelor's or Master's degree in Mechanical or Electrical Engineering. Strong understanding of mechanical and electrical engineering principles. Experience with product development processes, including design, prototyping, and testing. Strong problem-solving skills and ability to work independently or as part of a team. Excellent written and verbal communication skills. Experience with data center technology and connectors/cable assembly is a plus. Project management skills and ability to manage multiple projects simultaneously. Knowledge about various phases of product realization and product development Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modeling, Geometric Dimension & Tolerancing (GD&T), electrical & electronic design, and Simulation Knowledge of manufacturing process (machining, molding, stamping, plating, etc.) Knowledge of material (metal/plastic) properties will be a plus. Familiarity with quality tools (FMEA, 6sigma, DOE, 8D) will be a plus. CRITICAL EXPERIENCE Minimum of 10 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related. This highly technical position requires an individual who can work independently. Experience in product compliance certification ( Product, Safety, Environmental substance control) Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM). Capability and experience in presentation on products, solutions, and technologies. Previous experience in working in high-performing multi-disciplinary global engineering teams. COMPETENCIES Technical capabilities: Expert functional/domain knowledge Application Engineering: Ability to understand customer requirements & offer engineering solutions Engineering management across cross-functional teams: Developing technical roadmaps to align with market direction & communicating it across business units, management & customers to share applicable technology Working together with the global team. Optimizing engineering & innovation: Defining & managing IP strategy & constantly improving products through R&D Building people capability: Training and mentoring engineers with the necessary skill set, assuring succession & workforce planning & organizational capability Quality controller: Ability to assure quality for services, labels & labs

• Hands on experience on FAI creation, review, and approval • Hands on experience in process planning & Inspection plans • Exposure to Machined, Sheet- Metal, Composite commodities. • Relevant certifications such as AS9102 FAI signatory

Role & responsibilities Thorough Dimensional Inspection using Vernier, Outer Mic, Bore Gauge, Height Gauges, etc. Good Understanding of GD&T requirements, Should prepare process & control plan, should prepare Type 3.1 Inspection reports Exposure on usage of portable & bench CMM Should be familiar with handling customer during inspection and documentation. Should have knowledge of CAPA, 8D, QMS and so on Inspection of Precision Components. Use of Vernier, Outer Mic, Bore Gauge, Height Gauges, Height Master, etc., Preferred candidate profile Good Understanding of GD&T requirements, Should prepare process & control plan. 03 Years in Quality Inspection of Precision Parts.

Hello Engineer, We are looking for Design Engineers to work onsite with a Global Heavy Engineering MNC, Epiroc Mining - Design Center of Atlas Copco at Nashik on Creo Software. Epiroc is a leading productivity partner for the mining, infrastructure and natural resources industries. With cutting-edge technology. Requirements : Qualification : BE (Mechanical / Production / Automobile) Experience : 3-6 Years Hands on experience on Creo (any version) Good understanding of sheet metal. Knowledge of GD&T and Welding. Good Communication Skills

ROLE : Thorough knowledge in engineering drawing ie, GD&T Understanding of measuring instruments usage & its selections (Vernier, micrometers, height gauges, tread gauges) Knowledge of material standards, heat treatment & surface treatment process Required Candidate profile 2+years of exp in Quality Control in Mechanical products Should've worked in machine tool, automotive , Robotics, Automation companies Qualifications: ITI Fitter/Machinist /DME / BE

Role & responsibilities: • Be a part of core project team and support the quality engineering across the entire development cycle Lead product risk management, usability, reliability and design validation efforts for new product development and design change projects. Lead the development and implementation of design verification and validation plans with project design lead. Lead the development of Critical to Quality (CTQs), design input and output documents. Lead the fixture qualification and test method validation. Participate and implement tools like Design of Experiments (DOEs), FMEA sessions, Risk Management and ensure compliance to CTQs and safety requirements. Manage electronic document control and version control on all project related documents. Ensure adherence to the quality systems and design assurance SOPs and Boston Scientifics PLCP. Lead usability, reliability, testing, verification and validation testing internal and local vendors. Provide statistical testing and reliability plans. Provide quality and regulatory compliance guidance as needed to product development or design change project teams to assure country specific compliance to the laws and regulations of the targeted market for distribution. Ensure appropriate Project/Sustaining Quality Deliverables are created and properly executed (e.g. Project Design & Development Plan, Risk Management Plan, Hazard Analysis, Use and Design FMEA, Field Assessment Plan, and Software Validation Plan if applicable). Co-Lead CAPA efforts, and apply sound, systematic problem-solving methodologies identifying, prioritizing, communicating and driving resolution of quality issues (e.g., 5 why’s analysis, Is-Is Not analysis, and Six Sigma problem solving methodologies). Devise and support the implementation of effective quality assurance, process controls, statistical analyses, and metrics that assure products meet or exceed quality. Skill Sets: Must have - Professional training and certification in in Quality Management Systems including ISO 13485, Risk management ISO 14971, design assurance / control, verification and validation. Sound understanding of medical device regulatory requirements for Class II and III medical devices. Project planning – resourcing, timelines, quality and budgets. Skilled in implementing Quality tools like design of six sigma, risk management, FMEA, FTA (Fault Tree Analysis). Preference for candidates with CQE certification or similar training and experience Proficient in project management tools like MS project. Experience in GD&T with statistical analytical techniques and s/w tools like Keywords & Tools: Quality Management Systems ISO 13485, Risk management ISO 14971, design assurance / control, verification and validation. Sound understanding of medical device regulatory requirements for Class II and III medical devices. development of Critical to Quality (CTQs) Quality tools like design of six sigma, risk management, FMEA, FTA (Fault Tree Analysis). Well versed MATLAB, MINITAB. GD&T CQE certification, CAPA

Experience in press toold (like bending ,compound,combination & progressive ),GD&T relative to tool design. exp. in solidworks / UGNX5 software with surfacing exp.

Role & responsibilities Design and Development: Create detailed 2D and 3D designs using CAD software (e.g., AutoCAD, SolidWorks, CATIA). Develop mechanical components, systems, and assemblies based on project requirements. Ensure designs comply with applicable engineering standards and regulations. Prototyping and Testing: Build and evaluate prototypes to validate design functionality and performance. Conduct tests, analyze results, and implement necessary modifications. Documentation: Generate and maintain engineering drawings, BOMs (Bill of Materials), and technical documentation. Prepare reports, manuals, and other design-related documents. Collaboration: Work closely with the manufacturing, procurement, and quality assurance teams to ensure product manufacturability. Collaborate with clients and stakeholders to gather requirements and address design concerns. Problem-Solving: Identify and resolve design issues during the development and production phases. Provide technical support for troubleshooting mechanical systems. Project Management: Monitor project timelines and ensure deliverables meet schedule and budget constraints. Participate in design reviews and provide technical input for continuous improvement. Preferred candidate profile Technical Skills: Proficiency in CAD tools (e.g., SolidWorks, Creo, NX). Knowledge of GD&T (Geometric Dimensioning and Tolerancing) and FEA (Finite Element Analysis). Familiarity with manufacturing processes (e.g., machining, injection molding, casting). Understanding of material selection and heat treatment processes . Soft Skills: Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Attention to detail and organizational skills. Perks and benefits

Your Job You will be designated as Graduate Engineer Trainee Our Team You will be a part of Molex DDP What You Will Do Operate primary CAD systems such as NX or SolidWorks or Creo (Basic to intermediate skill) Develop appropriate design risk mitigations and test strategies using dFMEA & pFMEA Develop appropriate assembly and test fixtures to aid in the manufacture and testing of the design. Develop appropriate drawings to detail part and assembly specifications in a manner compliant with ASME Y14.5 & ISO 1101 or other design standards Generate Engineering Change Orders to document design changes and customer approval. Set up and Perform engineering test for component verification against mechanical specification. Selection of material for plastic, metal, elastomeric parts that are interacting with the drug Other duties as assigned. Who You Are BE/B. Tech in Mechanical Design or Mechanical Engineering or Mechatronics Good academic score from tier 2 institutions Familiar with GD&T application Ability to generate complex solid & surface 3D CAD models & 2D drawings Familiar with various materials Strong written and verbal communication skills Demonstrates strong ability to evaluate and recommend appropriate prototyping processes (i.e. SLA, printed, machined, molded) Maintains and respects customer, project, and program confidentiality Motivated self-starter who is able to manage multiple tasks What Will Put You Ahead A challenging position in an international innovative and successful company that is growing. An opportunity to setup the processes and development team in India to support the Asian customers. An opportunity to become part of a global team of dedicated and highly qualified colleagues based in Bangalore, India. Well-structured training and continuous development of your competencies. Exciting career possibilities within the constantly growing area of medical devices

Hiring for portable CMM engineer Location: Coimbatore, Bangalore, Hosur, Chennai Free rooms will be given PCMM (FARO, ROMER, or etc) PolyWorks, CAM2, Verisurf Engineering drawing, CAD models, and GD&T Expe in operating and programming portable CMM

Job tittle-Mechanical design Engineer Location-Bangalore Overall Purpose of the Role: Automation, Design of mechanical engineering components, design and development of SPM , Design review and Checking of 2D detail drawing. Work in a team environment as a key resource for mechanical design and development. Understand customer requirements and propose solutions keeping functionality, optimization in view Responsibilities will include cross-functional interaction to qualify new design, Achieve the customer specifications and requirements. Offer technical support. Work on multiple phases or sub-tasks of projects or entire Projects of moderate complexity, with results impacting on project completion. Key Responsibilities and skills Experience in automation, electromechanical / mechatronics and related concepts. Understand customer requirement, propose feasible ideas and concepts. Well versed with creation, reading and interpretation of engineering drawings and standards particularly precision components, fabricated structures. Wide knowledge of automation products. Validation of engineering components and concepts through engineering calculations. Selection of commercial items like Bearings, motor, gear box, Servomotor, sensors, conveyors etc.. Awareness about best machining process, heat treatment process, engineering materials, surface treatment, EDM EBM mechatronics etc. Knowledge about material handling equipment, Able to understand and apply limits fits and tolerances, GD & T, surface finish. Good knowledge of DFx (DFM,DFS,DFA) concepts. Knowledge of robotics, robot selection, application is an added advantage. Well convergent with CAD 2D/3D platform particularly AUTO CAD , SOLID WORKS (Mandatory) Qualifications and Experience Levels: Bachelors degree / Diploma in Mechanical engineering or Equivalent with 5 to 10 years of relevant experience

Role & responsibilities Job Description B.E Mechanical with 4+ years of hands on experience in concept and design of machining fixture and Gauge Inspection fixtures designing using Creo CAD Tool Good understanding of various Manufacturing processes, Resting, locating & Clamping principles. Good in GD&T and Drafting. Knowledge on PDM, Windchill, Materials used for Fixture design, welding symbol & Heat treatment process. Knowledge for Limit Fit & Tolerances, Geometric tolerances. • Ability to read and interpret product drawings and prints. Large assembly tolerance stack analysis. Good communication and ability execute project independently. Mandatory Skills Creo Parametric, Welding, Mechanical Design, Machining, Heat Treatments, PTC Creo, Geometric Dimensioning And Tolerancing (GD&T) Preferred candidate profile Perks and benefits

Focus on WELDING & STAMPING PROCESS QUALITY CONTROL, DRAWING READINGS, GD&T, PPAP, 8D, QMS, QUALITY SYSTEM AUDIT, CUSTOMER COMPLAINTS HANDLING, ISO 9001:2015, MANPOWER MGMT, MAINTAIN QA RECORDS etc Strong exposure in WELDING & SHEET METAL QA must Required Candidate profile Dip/ BE 10+ exp into QUALITY with solid exp in either STAMPING, SHEET METAL, FABRICATION, PRESSING or WELD SHOP process Auto Press Shop exp must Relocate / Work @ TADA Call Silvia @ 80725 21729 Perks and benefits Excellent Perks. Call Ms. Silvia @ 80725 21729 now

Tooling Engineer - Design (Tooling -Jigs & Fixtures skills using CATIA ) Skills and Core Competencies o Experience working with machine shop & assembly environment. o Must be proficient in CATIA v5 software. o 5 years of experience in the aerospace industry preferred and 3 to 5 years of direct work on design and production of tooling and industrial equipment. o Ability to do mechanical stress hand calculations. o Experience with CATIA Stress Analysis Module and/or ABAQUS/CAE software. o Knowledge of engineering materials and their selection. o Experience in designing tooling for landing gear components manufacture in a precision machine shop & assembly environment would be an asset. o Good knowledge of Geometric Dimensioning and Tolerancing (GD&T) as well as engineering drafting practices and related technical standards. o Familiarity with methods (process) engineering as well as with CNC/CMM programming and CNC machining. o Knowledge of off-the-shelf tooling components and their selection. o Ability to visualize drawings and objects. o Team and goal oriented, self-motivated, and possessing a strong work ethic. o Able to communicate clearly and directly both verbally and in writing. o Project and time management skills with good sense of urgency. o Proficiency in MS Office Suite (Word, PowerPoint, Project, Excel). o Showing critical, creative and incisive thinking; result-oriented with leadership and organizational skills. o Strong and continuous focus on process improvement.) Specialized knowledge: In depth knowledge of Geometric Dimensioning and Tolerancing (GD&T) principles, Catia v5 software and SmarTeam v5 software. About Work Location Working in Shifts. Work location Bangalore (No WFH) Qualification/requirements 6-8 years Hands-on experience on CATIAV5. BE in Mechanical or Associated Branches.

CNC grinding, Cylindrical grinding, centerless grinding, internal grinding.

Sound Knowledge of Mechanism Concept Design & Systems process design. Choosing appropriate geared motors, bearings &sensors based on calculations. Designing mechanical components in 2D & 3D software like SolidWorks, Solid Edge, or AutoCAD. Required Candidate profile Apply Geometric Dimensioning & Tolerancing (GD&T) for accurate and efficient design. Ability to perform calculations of Geared Motors, Pneumatics Cylinder, Bearing, Sensors & etc.

1. Experience in Product inspection (Visual & Dimensional). 2. Hands-on experience in measuring instruments handling like (Vernier , Micrometer, Height Gauge, Attribute gauges, Air guages,TPG etc.) 3. Good knowledge of inspection, measurement techniques, GD&T. 4. Good written & verbal communication skills.

RESPONSIBILITIES Creation of 3D model and drawings as per Industrial standards using Creo Product data management using PDMlink & CPR. Manage Engineering change, Part status and Product attributes. Design, develop and qualify tooling and processes to meet TE quality and production standards. Creation and maintaining product specifications & Application specifications. Support on new product development activities, ability to support on concept generation, tolerance stack up, DFM & DFA and basic FEA activities. Ensure tolerance chain is maintained from individual component level thru complete assembly process. Critical dimensions identified and measured. Should be able to interact with global stakeholder (PM/Engineering etc.) and communicate technical details efficiently. Collaborate on continuous improvement initiatives using TEOA / Digital methodologies EDUCATION/CRITICAL COMPETENCIES Bachelors degree in Mechanical engineering or related degree with 2+ years of professional experience Hands on CAD and drawing experiences with Creo (Mandatory) Hands on experience in Product data Management, ECR & Product life cycle management. Working knowledge in DFMA, DFx, GD&T & Tolerance stack up process Demonstrates understanding of new product development, Demonstrate understanding of design process. Knowledge of associated manufacturing processes a benefit (Molding / Stamping / Plating). Understands design to cost, quality and manufacturability Excellent verbal and written communications skills Ability to communicate, negotiate and drive results Must be self-motivated, organized, with the ability to prioritize, set and achieve goals and drive results.

Role & responsibilities 1) Understanding of Customer and Process drawings in 2D / 3D . 2) Knowledge in New CNC Part Programing and setting changeover . 3) Knowlegde in PFMEA , PFD ,and SOP - Preparation and review as per requirements 4) New products/Process trials & establishment 5) New Product/Process Validation 6) New machine design approvals and Supplier follow-ups 7) New machine trials at supplier end and machine establishment in Line . 8) PPAP Documentation and line readiness for customer audit 9) Knowledge in Layout and Cycle time study . 10) System Knowledge in IATF-16949

Seeking a metal fabrication professional (2-5 years exp.) with expertise in feasibility studies, NPD, ECN, SolidWorks/AutoCAD, Laser & Plasma programming, GD&T, PPAP, SAP BOM updates, and cost estimation.

Role & responsibilities Generation of layout and general arrangement drawingsCreation of 3D models, assemblies, Drawings, Bill of material (BOM) & customer specific designs. Maintain Material library records and update the materials library files as and when needed in PLM Prepare SOP for design and CAD activities, improve efficiency and quality of design and drafting. Preferred candidate profile Experience with design of industrial equipment preferred. Working experience of large assemblies, Standard Modeling, Standard Drawing, GD&T, Sheet metal, Frame maker, Routine, i-parts, i-assemblies, Metal Forming processes, etc. on Autodesk inventor. Well versed with PLM systems. (Autodesk Vault Preferred) Ability to define and executes small automation projects using VB/C# & I-logic in Inventor. This will be on contract for 1 year on our payroll.

Role & responsibilities Product Design, Development and Engineering activities. Creating concept design of New Products, 3D Modeling and review Creating part and assembly drawings, Verification, review and release for production. Engineering change management and document update Proto development including inspection fitment and functional verification Performance and product life cycle testing Attending Quality review meeting and Field visit. Cost saving projects and meeting IMS requirements. Interested Candidates may share your resume to rmclhr@roots.co.in / 75400 66160.