285 Gas Jobs - Page 9

VESSEL OPERATIONS ENGINEER/SR. OPERATIONS ENGINEER Project: H&G Project Work Location: OPP Site Working Hours: 84hrs (12hrs x 7 days) FAT (Food, Accommodation, Transportation): Company provided Tasks: ? Ensure compliance with QA/QC&HSE requirements ? Review project documentation reporting errors/omissions, suggest improvements considering advices from vessel operations management ? Assist in liaising with Client Representatives/subcontractors ? Assist in monitoring progress of work/site conditions, promptly advise if changes to project schedule/execution sequence may occur ? When onboard support Vessel Management Team in planning/execution of work/project contractual & technical requirements ? When assigned to onshore work/site support site Supervisors in planning/execution of work/project contractual/technical requirements ? Participate to resolution of any technical problems ? Supervise execution of diving, pre-commissioning, post trenching, hook-up ? Provide operational input/support to onshore project teams ? Liaise with Installation Engineers during preparatory/mobilisation/installation phase ? Review installation procedures/loadout/sea fastening plans for material/structures offshore transportation to ensure safe/timely installation ? Ensure completeness of construction materials/consumables lists liaising with Project Coordinator for timely procurement/delivery ? Coordinate with Mobile Equipment, Asset, PIPTEC, ROV, Trenching, pre-commissioning, Hook-up to ensure that all necessary personnel/equipment are timely available

SUMMARY Welder We are seeking a dedicated welder to contribute to the achievement of our company's objectives by maintaining machines that manufacture and repair metal structures, tools, and equipment. The ideal candidate will complete all welding and gas cutting tasks within specified timeframes while strictly adhering to safety procedures. In addition to welding responsibilities, the welder will be expected to perform fitting tasks assigned by the Maintenance Supervisor, maintain a clean and organized work area, and ensure compliance with safety regulations. Embracing the company's vision and actively working on waste reduction are also key aspects of this role. Key Responsibilities: Complete welding and gas cutting tasks within specified timeframes while adhering to safety procedures Perform fitting tasks assigned by the Maintenance Supervisor Maintain a clean and organized work area to hygiene standards Weld materials using correct techniques and specialized machinery Assess welded surfaces, structures, and components to identify errors Enforce strict safety regulations and monitor machinery usage and temperature Weld components in various positions and embrace the company's vision Actively work on waste reduction and comply with company policies and procedures Support and promote the highest standards of hygiene at our company's Group Salary Range: Rs 40,000 to Rs 55,000 Key Technical Skills & Knowledge: Knowledge of various welding techniques, including TIG, MIG, arc, and oxy-fuel welding Knowledge of manual and mechanical welding techniques Ability to carry out jobs independently Education/Qualification: Any degree/diploma Experience: A minimum of 5 years of experience as a welder Salary - 50 - 55k Requirements Requirements: Proven experience as a welder Knowledge of various welding techniques Ability to work independently Strong commitment to safety and hygiene standards Benefits 3 years Contract, if performance good renewed for another 3 years. In-case contract is renewed, then wages will be increased for a period of another 3 years. Will be given 1 Round Trip Air Fare (India-Fiji-India) free of cost every 3 years. Will get free accommodation in Fiji & free travel to work while fooding cost will be borne by the candidate which is approx. Rs 5,000 per month. Annual Leaves: Sick Leave will be 10 days, Annual Leave will be 10 days per year along with Gazetted Holidays listed by the Govt of Fiji.

Application Deadline: 14 July 2025 Department: Drafting and Design Employment Type: Full Time Location: Pune, MH, India Description Equinox Design Engineering India Pvt. Ltd. is a 100% subsidiary of Equinox Engineering Ltd, Calgary-based EPCM firm. We are market leader in oil and gas processing specializing in facilities design, implementation and operational assistance for natural gas, conventional and heavy oil projects. Our clients include several of the largest oil & gas producers in canada and worldwide, and we are currently executing a wide range of sweet gas, sour gas, conventional oil, heavy oil facility and pipeline projects. Job Overview: Civil/Structural Designers oversee the design, analysis, building, and maintenance of load bearing structures. The Civil/Structural engineer will divide their time between design review and site visits, to make sure that the build complies with the plans, environmental factors, good industry practices, and sound engineering principles. If there are any discrepancies, they make recommendations and verify that required changes are made before signing off on the finished project. Key Responsibilities •Prepare high quality design drawings in a timely and efficient manner. •Prepare 3D model and produce drawings for the various industrial steel structures. •Types of drawings include GA’s, Pipe supports layout, Piling layouts, Platforms, Cross overs, Staircases, Ladder, Railing, Gratings etc. and As-Builts. •Prepare typical drawing and bill of materials. •Effectively communicate the status of tasks, design changes and continuous improvement items to the rest of the team. •Maintain proficiency with the most up to date drafting software. •QAQC checking. •Mentoring and training other members of the team Skills, Knowledge and Expertise •Good English communication and understanding ability – directly communicate with Canadian /Australian counterparts. •Shall be self-driven, with minimum supervision. •Proficient with AutoCAD •Working knowledge of 3D modelling using Bently AutoPlant/CadWorx/Advance Steel •Fundamental computer skills, including Microsoft Word and Excel •Solid understanding of the oil and gas industry with EPCM design experience •Highly motivated team player with excellent communication skills •Ability to work in a fast-paced deadline driven environment. Education and Qualifications ITI / Diploma in Civil Engineering. Post secondary education such as Engineering Design and Drafting 5+ Years experience, preference for an EPCM background. Our People and Culture: Flexible Work Schedules for a healthy work-life integration. Abundant growth opportunities, mentorship programs, and continuous learning initiatives.

Job Title: Package & Machinery Inspection Engineer Company Name: Tecnimont Job Description: As a Package & Machinery Inspection Engineer at Tecnimont, you will be responsible for overseeing the inspection and quality assurance of various packages and machinery throughout the project lifecycle. You will work closely with project teams to ensure compliance with technical specifications, industry standards, and safety regulations. Your role will include conducting inspections, preparing reports, and collaborating with vendors and subcontractors to resolve any issues that arise during the fabrication and assembly processes. Key Responsibilities: - Conduct inspections of machinery and packaged equipment to verify compliance with design specifications and quality standards. - Review inspection and test plans to ensure they align with contractual and regulatory requirements. - Collaborate with engineering, procurement, and construction teams to address any quality-related concerns. - Prepare detailed inspection reports and documentation for review and approval. - Monitor the performance of vendors and suppliers, performing audits as necessary. - Participate in project meetings and provide updates on inspection activities and findings. - Perform root cause analysis for non-conformities and track corrective actions. - Ensure adherence to safety protocols and promote a culture of safety within the team. Skills and Tools Required: - Bachelor’s degree in Mechanical Engineering or a related field. - Strong knowledge of quality assurance principles and inspection techniques. - Familiarity with industry standards such as ASME, API, and ISO. - Proficiency in using inspection tools and equipment, such as calipers, gauges, and ultrasonic testing devices. - Excellent analytical and problem-solving skills. - Strong communication skills, both verbal and written. - Ability to work collaboratively in a multidisciplinary team environment. - Proficiency in using software tools for documentation and reporting, such as Microsoft Office Suite and project management software. - Certification in Quality Control or relevant inspection certifications (e.g., AWS, NACE, or similar) is a plus. This role is critical to the success of our projects and requires a detail-oriented individual who is committed to maintaining the highest quality standards. If you are passionate about quality inspection and machinery, we would love to hear from you. Roles and Responsibilities About the Role: The Package & Machinery Inspection Engineer will play a crucial role in ensuring that all machinery and equipment comply with the established quality standards and specifications. This position involves conducting thorough inspections, identifying defects or non-conformities, and ensuring adherence to both internal and external regulations. The role also requires collaboration with various stakeholders to facilitate smooth project execution and resolve any issues related to package integrity. About the Team: The team is comprised of experienced professionals who are dedicated to maintaining the highest standards of quality in machinery and equipment inspections. Members collaborate closely with engineering, procurement, and project management teams to ensure comprehensive oversight throughout the project lifecycle. The team emphasizes continuous improvement and knowledge sharing to enhance technical skills and foster a culture of excellence. You are Responsible for: - Conducting inspections of machinery and packages to ensure compliance with quality standards. - Preparing detailed inspection reports and documenting findings for review and action. - Collaborating with vendors and suppliers to address any identified deficiencies and ensuring corrective actions are implemented. - Participating in meetings with project stakeholders to discuss inspection results and provide recommendations for enhancements. To succeed in this role – you should have the following: - A degree in mechanical engineering or a related field with a strong understanding of machinery and inspection techniques. - Proven experience in equipment inspection, preferably in the oil and gas or industrial sectors. - Knowledge of relevant industry standards and regulations governing machinery and equipment. - Strong analytical skills and attention to detail, along with effective communication and teamwork abilities.

Application Deadline: 14 July 2025 Department: Civil Engineering Employment Type: Full Time Location: Pune, MH, India Description Equinox Design Engineering Ltd. is a Calgary-based EPCM firm. We are a market leader in oil and gas processing specializing in facilities design, implementation and operational assistance for natural gas, conventional and heavy oil projects. Our clients include several of the largest oil & gas producers in canada and worldwide, and we are currently executing a wide range of sweet gas, sour gas, conventional oil, heavy oil facility and pipeline projects. Job Overview: Civil/Structural Engineers oversee the design, analysis, building, and maintenance of load bearing structures. The Civil/Structural engineer will divide their time between design review and site visits, to make sure that the build complies with the plans, environmental factors, good industry practices, and sound engineering principles. If there are any discrepancies, they make recommendations and verify that required changes are made before signing off on the finished project. Key Responsibilities Estimate design hours and manage civil scope for projects. Ensure civil designs meet the requirements of both the Client and Equinox. Provide designs on a variety of project sizes ranging from well pads to large plants. Ensure that projects are completed on time and on budget. Coordinate with other disciplines. Provide technical scope and evaluate Civil and Structural bids and contracts. Assist with development of Civil Department documents (specifications, templates, and standards). Key Skills and Abilities Proficiency with RISA or equivalent software & Drafting. Must possess strong communication and interpersonal skills. Broad exposure to oil and gas facility design including both natural gas and heavy oil / SAGD projects, including field facilities / infrastructure projects as well as complete processing facilities. Civil and structural design experience of steel and concrete structures, piles, and earthworks. Ability to lead civil project design teams. Minimum 10-year experience in design and analysis of large reciprocating and centrifugal machine foundation system. Foundation analysis with Dyna 6 and or SAP 2000 with complete knowledge of soil and structural modeling. Strong background in concrete foundation anchorage & grouting detailing and design as per CSA, ACI & ASCE standards. Strong background in concrete foundation rebar detailing and design as per CSA, ACI & ASCE standards. Strong background in modeling, analysis and design of pile foundation system for dynamic loads. Complete knowledge of industry standards for complex machine foundation design and detailing. Education and Qualifications Bachelor’s degree in civil engineering Minimum 7+ year’s oil and gas experience (with EPCM background). Our People and Culture: Flexible Work Schedules for a healthy work-life integration. Abundant growth opportunities, mentorship programs, and continuous learning initiatives. Our Environmental Commitment: Equinox believes in a balanced energy future. Our projects, from Carbon Capture and Sequestration to Renewable Natural Gas, exemplify our commitment to an environmentally responsible energy sector. Equinox Success Statement: Equinox consistently delivers focused and experienced premium teams, custom-tailored with the best technical expertise to align seamlessly with client culture and requirements. Our commitment ensures the successful execution of projects on a repeatable basis.

SUMMARY Job Title: Field Associate - Fintech Location: Kolkata Type: Freelance / Field-Based Industry: Fintech / Financial Services About the Role: We are seeking dynamic freelance field executives to represent Ongrid, a leading fintech company, and promote its Channel Financing Facility . You will be responsible for meeting potential clients (SMEs, vendors, or distributors), pitching the financing solution, and facilitating their onboarding process by collecting necessary business documentation. Key Responsibilities: 1. Meeting Scheduling Coordinate with the central team or client point of contact (POC) to fix meetings with identified businesses. 2. Client Visit & Product Pitch Visit assigned client locations as per the schedule. Present and explain Vayana’s Channel Financing product to the finance/operations decision-makers. Use pitch decks, product documents, and FAQs to support your conversation. Explain repayment structure, benefits, eligibility, and onboarding steps in a clear and confident manner. 3. Lead Conversion & Onboarding Encourage interested businesses to sign up for the financing facility. close high-ticket policies in the range of 25 lakhs to 5 crores. Collect key documents such as KYC, financial statements, ITRs, bank statements, and GST returns. Ensure accurate handover of documents to the central processing team for further verification and activation. Eligibility Criteria: Bachelor’s degree (Commerce/Finance preferred) Pref 1+ year of experience in field sales, B2B outreach, or onboarding roles Strong verbal communication and interpersonal skills Familiarity with basic business documents (KYC, financials, etc.) Ability to travel locally and manage client interactions independently Why Join Us? Flexible freelance opportunity Attractive earnings per successful onboarding Backed by Ongrid, a reputed fintech brand Training, pitch materials, and backend support provided Apply Now & Start Your Freelance Journey in Fintech! Benefits Commission around 7k to 10k in per closure.

Role & responsibilities Degree in Mechanical Engineering or equivalent Around 45 years of relevant industry experience analyzing offshore or subsea equipment in the oil & gas industry Detailed knowledge of engineering related to layout, piping materials, and piping systems of the offshore oil and gas industry, including applicable codes, standards, and specifications Proficient in the use of piping analysis programs such as Autopipe, Triflex, and Caesar Familiar with Finite Element Analysis tools such as ANSYS or ABAQUS Expert knowledge in ASME VIII Boiler & Pressure Vessel Codes, stress linearization and classification concepts (linear/non-linear analysis), and HISC assessment Basic knowledge of Python scripting Knowledge of international offshore piping standards and design codes such as ASME B31.8, ASME B31.3, DNVGL-RP-F112, and NORSOK standards Experience preparing and checking stress analysis reports using Triflex or Autopipe software Ability to prepare nozzle load and pipe support load reports and coordinate with mechanical and structural teams as required Demonstrated ability to independently create functional and cost-effective designs that meet complex specification requirements Experience reviewing vendor drawings for valves and specialty items Experience reviewing vendor drawings and documents from other departments Strong ability and initiative to communicate effectively, gather information, and make sound engineering decisions Preferred candidate profile Uses sound engineering judgment, classical calculations, and analysis programs to analyze designs and generate new designs. Participates in design reviews and provides specialist piping, jumper, or flowline design advice to other engineers. Provides recommendations for optimizing piping designs to ensure functionality and manufacturability. Independently develops solutions to problems by analyzing, interpreting, and evaluating data. Anticipates potential problems and takes preventative actions. Responsible for quality and on-time delivery of assigned tasks. Ensures good personal time management and timely weekly time entry into the SAP system. Provides input to and supports improvements to processes or work instructions. Ensures that assignments conform to TechnipFMC EEP, guidelines, and specifications.

Sectoral skills LNG, LPG, Natural Gas, CGD, CBG, Ethanol, Hydrogen, SAF, Ammonia, Petroleum Products, etc. Functional Experience in strategy, financial modeling, techno-commercial analysis, demand & pricing modeling, regulatory assessment Mandatory skill Consulting background, market research, analytical & presentation skills, excellent communication skills, report writing, proposal building

INSPECTOR B MULTIDISCIPLINE CSWIP 3.1 OR 3.2 is mandatory OR BGAS Grade 1 OR SSPC Level 2 OR NACE (SAP ID) Diploma in Engineering Inspector Should have Active QM SAP approval from Saudi Aramco QM03 is minimum. QM11 / QM30 / 31 / 34 / 35 / 37 approvals added advantage . Job Code: 7450 JOB TITLE Inspector B Mechanical JOB GRADE 7 DEPARTMENT Test and inspection DATE OF PREPARATION 9/11/2020 PREPARED BY: HR Dept. REVISION NUMBER 1 REVISION DATE 25/11/2020 REVIEWED BY HR DEPT. I. JOB PURPOSE For realization of third-party inspections services in mechanical discipline as per the appropriate specifications and approvals to meet the company sales and customer request realizations. II. GENERAL SPECIFICATIONS Education Diploma in Mechanical Engineering Experience Inspector 3-year Experience in any of the commodities in mechanical -International Professional Certification in Welding (CSWIP 3.1) and NDE Level 2 mandatory. Inspector Should have Active QM SAP approval from Saudi Aramco QM03 is minimum. QM11 / QM30 / 31 / 34 / 35 / 37 approvals added advantage . Computer Skills Proficiency in MS-Office applications. Technical Skills/Personal Competencies In-depth knowledge of the following Communication skills Commercial awareness Computer Skill Supervision Job monitoring, reporting, presentations Administrative and technical skills communication skills Languages Proficiency in English, and Arabic if needed. Written and Verbal Communication Skills Excellent communication skills demanded. III. AUTHORITY FINANCIAL NO NON-FINANCIAL NO IV. REPORTING LEVEL SUPERVISION RECEIVED BY THIS JOB (Job Title of Immediate Superior) SUPERVISION GIVEN BY THIS JOB (Job Titles and Number of Individuals Supervised by this Job, if any) OTHER REPORTING LEVELS (If any) Test and Inspection manager NO V. OPERATING NETWORK EXTERNAL (Networks that influence the position) INTERNAL EXTERNAL (Networks that are influenced by the position) Client and vendor Within the team Customers VI. KEY RESULT AREAS (KRAs) and LIST OF RESPONSIBILITIES KEY RESULT AREAS (KRAs) (Identify the major areas or activities that will produce the contributions that the company expects from the employee) LIST OF JOB RESPONSIBILITIES (Identify routine and non-routine functions the employee needs to perform to meet the identified KRA. As much as possible, highlight the result that is expected from each task) LEVEL OF RESPONSIBILITY (Full, Partial, Supporting Duties: Major: Work as a team under supervision and be able to communicate well with other disciplines and create a good working relationship with other technical and operational staff. Must be able to work under all kind of work circumstances, endure strain. Be aware of all Health and Safety aspects when working on location. Must follow all the instruction and able to perform assignments in a day. Good knowledge of the English Language written and verbal. To review the assignment instruction for adequacy and practicality. To attend/conduct pre-inspection meetings as required under supervision till upgraded to inspector A. To liaise with clients, and others as relevant, in the determination of inspection stages and requirements. To visit manufacturers, suppliers, installers and others as necessary to perform or witness the requisite inspections. To provide in good time all required reports of the inspections performed / witnessed under supervision till upgraded to inspector A. To ensure all inspection and related activities in which involved are performed in accordance with requirements as defined in AMO work instructions and procedures. To follow company rules, regulations, instructions and guidelines, for Quality, Safety, Driving Safety and other site/client/field QHSE requirements as applicable. In addition to the above as per company instructions/directions. AUTHORITIES: Under supervision till upgraded to inspector A. As below, To raise Non-Conformance against violation of code and project requirements. Have rights to witness all fabrication activities during the visit. Endorse the Material test certificates which are meeting the project and code requirements. To raise concerns and recommendation to vendor (Manufacturer) during fabrication. To raise concerns to client any project requirements. Have rights to select locations (Joints) which are required NDT. Reject the material if not meeting the requirements. Reject the inspection activity such as Fit-up, FVDI etc.. whereas exceeding the acceptable fabrication tolerances. To accept and release the material if complying the project and code requirements. To sign the inspection rest report as performed. Minor: NA FULL KPIs: Ontime inspection assignment realization with effective technical performance as per applicavle standards and reporting the results.

QHSE SPECIALIST Education- Bachelor's degree in science/Engineering Experience- 5 year of experience in QHSE requirements Lead Auditor certification is preferable in QMS 9001:2015 Computer Skills- Proficiency in MS-Office applications. Technical Skills/Personal Competencies- Research and Development skills, Lead Auditor for QMS & OHSAS, System Auditing, Investigations, training, communication, presentations, analyzing skills for sales, debt and credit control, proactive in approach and planning, report preparation, reviewing process outputs. System awareness and competency Auditing, Implementation, Training of 9001:2015, 14001:2018,45001:2015, Quality and HSE management skills ect. ISO 17020 & ISO 17025 implementation

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Piping / Mechanical(Packages) for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Piping, static & rotary equipment in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer-Mechanical (Packages) on mining projects. In-depth knowledge of piping design codes and standards, such as ASME B31.3, ASME B31.4, and ASME B31.8. Knowledge of process engineering principles and equipment specifications. Understanding of fabrication and construction techniques for piping systems. Knowledge of international codes and standards, mainly ASME VIII div. 1/2, API and TEMA. Design and develop piping systems and components for various, Review detailed piping layout drawings, including isometrics and bill of materials. Collaborate with the project team to ensure compliance with project specifications and industry standards. Engineering & design experience in rotary machinery to provide expert guidance in the selection, specification of rotating equipment like pumps, compressors, and blowers. Responsibilities include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards. The ideal candidate will have in-depth knowledge of API standards and rotating equipment lifecycle. Engineering & design experience in Pressure vessels, heat exchangers, tanks, pumps, compressors, blowers, piping system, pipe supports, pipe support structures. steel & RC structures, preparation / review of detailed. Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications, Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for static, rotary, valves, piping specialties, etc. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related bottlenecks in project. Extraction and handling Piping MTO for the project. Develop inspection and testing plans (ITPs) for tanks and vessels, including hydrostatic and non-destructive testing (NDT). Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in piping, static, rotary equipment engineering. Minimum of a bachelor’s degree & preferred master’s degree in mechanical engineering. PG diploma or certificate in Piping engineering would be an asset. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage.

NDT TECHNICIAN B Education- High school or Diploma Experience- 3 Years Experiences in NDT inspection field Computer Skills- Proficiency in MS-Office applications. Technical Skills/Personal Competencies- ASNT NDT Level II either RT with other method like MT,UT & PT as relevant Radiation Protection permit (RPP) & others. Skill to select the NDT technique-Performing, Interpreting & Reporting . Familiar of the applicable project specification & procedure.

NDT TECHNICIAN A Education- High school or Diploma Experience- 3 Years Experiences in NDT inspection field Computer Skills- Proficiency in MS-Office applications. Technical Skills/Personal Competencies- ASNT NDT Level II either RT with other method like MT,UT & PT as relevant Radiation Protection permit (RPP) & others. Skill to select the NDT technique-Performing, Interpreting & Reporting . Familiar of the applicable project specification & procedure. Job Code: 2049 JOB TITLE NDT Technician A JOB GRADE 2 DEPARTMENT Test and Inspection DATE OF PREPARATION 09/11/2020 PREPARED BY: HR Dept. REVISION NUMBER 1 REVISION DATE 25/11/2020 REVIEWED BY HR DEPT. I.JOB PURPOSE To perform NDT activities II.GENERAL SPECIFICATIONS Education High school or Diploma Experience 3 Years Experiences in NDT inspection field Computer Skills Proficiency in MS-Office applications. Technical Skills/Personal Competencies ASNT NDT Level II either RT with other method like MT,UT & PT as relevant Radiation Protection permit (RPP) & others. Skill to select the NDT technique-Performing, Interpreting & Reporting . Familiar of the applicable project specification & procedure. Languages Proficiency in English, and Arabic if needed. Written and Verbal Communication Skills Good knowledge of the English Language written and verbal. III.AUTHORITY FINANCIAL NO NON-FINANCIAL YES IV.REPORTING LEVEL SUPERVISION RECEIVED BY THIS JOB (Job Title of Immediate Superior) SUPERVISION GIVEN BY THIS JOB (Job Titles and Number of Individuals Supervised by this Job, if any) OTHER REPORTING LEVELS (If any) NDT Sr. Technician/ Supervisors and Coordinators NA V.OPERATING NETWORK EXTERNAL (Networks that influence the position) INTERNAL EXTERNAL (Networks that are influenced by the position) Client QC and Project team Within the team NDT clients VI.KEY RESULT AREAS (KRAs) and LIST OF RESPONSIBILITIES KEY RESULT AREAS (KRAs) (Identify the major areas or activities that will produce the contributions that the company expects from the employee) LIST OF JOB RESPONSIBILITIES (Identify routine and non-routine functions the employee needs to perform to meet the identified KRA.As much as possible, highlight the result that is expected from each task) LEVEL OF RESPONSIBILITY (Full, Partial, Supporting Duties: Major: To follow and support senior technician and coordination for all day to day tasks, reporting, equipment uses, handing, transportation, and job arrangements and execution of NDT at site. To visit site or job location to identify the requirements, spot, techniques, precautions, permits approvals, training, and other arrangements for performing the NDT inspection and to confirm the same with customer at site for proper and smooth execution of jobs. Support and executes the job assigned at sites for daily operational, quality, administrative, HSE, and other project related requirements as applicable. To follow the company procedures, polices and business interest with proper execution and management of site activities at all the time. Follow all Safety, Quality, Technical and Operational requirements in handling of equipment, tools and accessories and make sure the compliance all the time. Notify the senior technician for all site related issues and confirm the actions are completed and/or resolved. To Communicate and coordinate with site head for arrangements of NDT equipment, transportation, allocation and use at site for smooth execution of project requirements. To keep good and effective communication with client and contractor representative at all the time and recuse operational compliant by properly executing the assigned tasks at site. In addition to the above as per company instructions/directions. Responsible to ensure and follow the company written policies, strategic plans, procedures and work instructions at all the time. To perform site inspection, testing and inspection with approved procedure and to report the results with proper care. To follow all legal and other requirements, work instructions, HSE, quality procedures, client requirements, emergency response at all the time. To report any unsafe act, condition, process, activity, machines, equipment, PPE immediately to supervisor which may cause harm to self, or coworker. To follow safe journey management system all the time. To use and maintain all the equipment, machines, tools, spares, accessories, PPE provided reports, inspections records safety all the time. To identify the hazards, inspect the work area for safe working, and to follow the engineering controls, work instructions, and other requirements. To follow all Quality controls, quality assurance services for inspections, testing activities as per the written procedures, standard specifications, client approved procedures for the project requirements. Follow all Radiation Safety, Radiation Emergency, Radioactive Material Transport, Use, Storage, Handling and other associated rules and regulations of radioactive material as set by the company in the respective procedures. Make sure proper Safety materials and protective devices are available and used, and ensure all equipment is in safe working order. To use the PPE all the time while working/chances of exposure to hazards which may cause harm /injury. Self-mentoring on safety requirements and perform toolbox talks at sites. Be updated with the requirements of Safety, quality, technical and other training and be aware of all rules and regulations set. Review all accidents incidents and near misses, oversee correction of all unsafe practices and file accident reports. Conduct on job-site Safety meetings. Notify the Management for all Safety violations. Follow the instructions from site coordinators for safe work, technical compliance, quality in work, reporting results ect. Follow quality system requirements, quality control plans, work instructions, quality control for ensuring quality in service. Authorities: Authorized to help in preparing daily progress reports, plan & perform inspections and test according to approved procedures, record the results and to sign in the test reports as assigned by the senior technician for AMO. Authorized to represent /support AMO NDT operations at site and to meet/communicate with the customer for all NDT matters such as planning, performing and reporting of NDT inspection as per the request /instructions from the site with consulting the operations head in NDT. Authorized to plan, mobilize, arrange NDT equipment, consumables, tools, accessories for smooth execution of jobs after consulting with senior technician, coordinator & NDT section head ; To plan, and arrange the equipment, material, tools, and accessories transportation for NDT team during mobilization, de mobilization, on call job executions, and long-term project requirements. To follow up, meet and confirm the mode and status of status of equipment with calibrations, verification, and maintenance as required for smooth operational execution of NDT section. To prepare, execute, maintain, records all site related reports, training, permits, and approval information and to sign in the test reports as supervised by Senior Technicians Minor: NA

SENIOR NDT TECHNICIAN Education- High school/ Diploma in Any Discipline Experience- 6 Years Experiences in the similar field Computer Skills- Proficiency in MS-Office applications. Technical Skills/Personal Competencies- ASNT NDT LEVEL II in RT, UT, MT & PT Capable of prepare NDT procedure, On job training of level, I & trainee Selection of proper technique, performing, evaluating, interpreting & reporting the result. Job Code: JOB TITLE NDT Senior Technician JOB GRADE 4 DEPARTMENT Test and Inspection DATE OF PREPARATION 09/11/2020 PREPARED BY: HR Dept. REVISION NUMBER 1 REVISION DATE 25/11/2020 REVIEWED BY HR DEPT. I.JOB PURPOSE For effective supervision of RT team, leading and performing the radiography as per assigned jobs and with proper coordination by following the procedural requirements as applicable. II.GENERAL SPECIFICATIONS Education High school/ Diploma in Any Discipline Experience 6 Years Experiences in the similar field Computer Skills Proficiency in MS-Office applications. Technical Skills/Personal Competencies ASNT NDT LEVEL II in RT, UT, MT & PT Capable of prepare NDT procedure, On job training of level, I & trainee Selection of proper technique, performing, evaluating, interpreting & reporting the result. Languages Proficiency in English, and Arabic if needed. Written and Verbal Communication Skills Good knowledge of the English Language written and verbal. III.AUTHORITY FINANCIAL NON-FINANCIAL IV.REPORTING LEVEL SUPERVISION RECEIVED BY THIS JOB (Job Title of Immediate Superior) SUPERVISION GIVEN BY THIS JOB (Job Titles and Number of Individuals Supervised by this Job, if any) OTHER REPORTING LEVELS (If any) NDT Supervisor/ Coordinator Other technicians. V.OPERATING NETWORK EXTERNAL (Networks that influence the position) INTERNAL EXTERNAL (Networks that are influenced by the position) End user /contractor QC Within the NDT team Client/customer. VI.KEY RESULT AREAS (KRAs) and LIST OF RESPONSIBILITIES KEY RESULT AREAS (KRAs) (Identify the major areas or activities that will produce the contributions that the company expects from the employee) LIST OF JOB RESPONSIBILITIES (Identify routine and non-routine functions the employee needs to perform to meet the identified KRA.As much as possible, highlight the result that is expected from each task) LEVEL OF RESPONSIBILITY (Full, Partial, Supporting Duties: Major: To follow and support Operations head for all day to day tasks, Test, Inspection, reporting, equipment distribution planning, mobilization, transportation, arrangement at site. Meet with customer representative in sites for daily operational, quality, administrative, HSE, and other project related requirements as applicable. Instruct employees and follow self for all Safety, Quality, Technical and Operational requirements in handling of equipment, tools and accessories and make sure they communicate the instruction to their crews. To follow the company procedures, polices and business interest with proper execution and management of site activities at all the time. Notify the Department head for all site related issues and confirm the actions are completed and/or resolved. To Communicate and coordinate with office and stores for arrangements of NDT equipment, transportation, allocation and use at site for smooth execution of project requirements. To keep good and effective communication with client and contractor representative at all the time and recuse operational compliant by properly managing the team at site. To visit site or job location to identify the requirements, spot, techniques, precautions, permits approvals, training, and other arrangements for performing the inspection and to confirm the same with customer at site for proper and smooth execution of jobs without any non-justifiable delay. In addition to the above as per company instructions/directions. Responsible to ensure and follow the company written policies, strategic plans, procedures and work instructions all the time. To follow all legal and other requirements, work instructions, HSE, quality procedures, client requirements, emergency response at all the time. To report any unsafe act, condition, process, activity, machines, equipment, PPE immediately to supervisor which may cause harm to self, or coworker. To follow safe journey management system all the time. To use and maintain all the equipment, machines, tools, spares, accessories, PPE provided reports, inspections records safety all the time. To identify the hazards, inspect the work area for safe working, and to follow the engineering controls, work instructions, and other requirements. To follow all Quality controls, quality assurance services for inspections, testing activities as per the written procedures, standard specifications, client approved procedures for the project requirements. Follow all Radiation Safety, Radiation Emergency, Radioactive Material Transport, Use, Storage, Handling and other associated rules and regulations of radioactive material as set by the company in the respective procedures. Make sure proper Safety materials and protective devices are available and used, and ensure all equipment is in safe working order. To use the PPE all the time while working/chances of exposure to hazards which may cause harm /injury. Self-mentoring on safety requirements and perform toolbox talks at sites. Be updated with the requirements of Safety, quality, technical and other training and be aware of all rules and regulations set. Review all accidents incidents and near misses, oversee correction of all unsafe practices and file accident reports. Conduct on job-site Safety meetings. Notify the Management for all Safety violations. Follow the instructions from site coordinators for safe work, technical compliance, quality in work, reporting results ect. Follow quality system requirements, quality control plans, work instructions, quality control for ensuring quality in service. Meet with customer representative in sites for daily operational, quality, administrative, HSE, and other project related requirements as applicable. Authorities: Authorized to prepare daily progress reports, plan & perform inspections and test according to approved procedures, record the results and to sign in the test reports for AMO. Authorized to represent AMO NDT operations at site and to meet/communicate with the customer for all NDT matters such as planning, performing and reporting of NDT inspection as per the request /instructions from the site with consulting the operations head in NDT. Authorized to plan, mobilize, arrange NDT equipment, consumables, tools, accessories for smooth execution of jobs after consulting with coordinator NDT section head; To plan, and arrange the equipment, material, tools, and accessories transportation for NDT team during mobilization, de mobilization, on call job executions, and long-term project requirements. To follow up, meet and confirm the mode and status of status of equipment with calibrations, verification, and maintenance as required for smooth operational execution of NDT section. To prepare, execute, maintain, records all site related reports, training, permits, and approval information. To request for spares, tools, accessories for project requirements and to keep such items safe and secure with proper use and care. Authorized to sign NDT test reports as senior technicians for the tests performed/supervised. Minor: NA

Job description We are inviting applications for MGPS Technician/ Manager. Qualification- ITI Experience- 4 - 16 Years in MGPS (Medical Gas Pipeline System) in Hospital For inquiries, kindly reach out to -Role & responsibilities Nisha Singh 8448519870

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position Engineering Manager (EM) is responsible for engineering and design matters on the project and assists the project manager. An EM will fill 3 main roles during the execution of a project. These are Manager, Technical Leader and Communicator. The EM on a project is responsible for scope definition and manages the planning, resourcing and scheduling all the engineering related activities. In addition, the EM provides technical leadership, integrates the disciplines and resolves issues. The EM is responsible for delivery of all the technical deliverables to achieve the project objectives within the specified time frame and budget. Experience • Typically 15 years & above of experience in a multi-disciplinary environment on major projects Design and procurement activities related to electrical systems / equipment. Sizing calculations for all major electrical equipment or systems. Preparation of RFQs for major electrical packages Vendor print review for all electrical equipment or systems along with cable schedules & interconnection wiring diagrams Exposure on Layouts such as General Arrangement drawings, Cable & conduit drawings, Earthing & Lightning Protection drawings, Lighting drawings. Exposure on Control and protection, review of schematics for EHV, MV & LV systems. Exposure to Load flow, Short circuit, Largest Motor starting studies using ETAP. Estimation of BOQs for cabling, earthing, lightning & lighting systems. Exposure to relay setting and co-ordination Inspection services for major electrical equipment (Optional) Familiarity in ETAP, DIALux, AutoGrid Pro, etc. Familiarity in 3D Engineering tools Aveva E3D, Hexagon Smart 3D, Navisworks Qualification • Postgraduate or graduate in an engineering discipline • Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1.Ensure the scope of work is developed and effective change management system is in place 2. Provide input into the monthly progress report with respect to design progress and issues of concern and recommended changes if required to achieve overall objectives 3. Contribute to the development of the project execution plan together with the project leadership team and allocate roles and responsibilities 4. Make Contact with client management at key milestones / tollgates throughout project to ensure that engineering deliverables are meeting client requirements. 5. Direct and review the engineering activities to ensure that the work quality is satisfactory and appropriate technical personnel development programs are conducted 6. Involve specialist expertise from within TCE or externally as necessary. work with Technology Organization and DHs for mandatory reviews 7. Raise safety awareness and ensure the design for safety principles are applied to the projects 8. Ensure Engineering risk assessments are carried out and all identified issues are addressed 9. Arrange and facilitate design reviews and participate as required in engineering and management reviews 10. Co-ordinate quality audit verifications to ensure compliance with all relevant engineering standards and internal procedures for all design activities. Instigate corrective actions as required. 11. Cooperate with the TCE engineering practice of other BU’s as directed on matters involving sharing of available expertise. 12. Responsible to ensure timely availability of inter-disciplinary data, integration of the same and resolution of any issues and challenges 13. Obtain regular feedback from customer and take appropriate action 14. Document value additions and best practices and ensure communication of the same to other project teams and leadership 15. Recommend rewards and recognition for exemplary performance from project resources Competencies Manages Conflict Self-Development Drives Results Ensures Accountability Optimizes Work processes Plans and Aligns Decision Quality Situational Adaptability Tech Savvy Interpersonal Savvy

TECHNICIAN (BOLT TORQUING) 10th Standard / High School Level / I T I-8+ Years-Oil & Gas project experience in plant piping. Should be able to handle works related torque tightening / bolts tensioning power tools. Knowledge about flange rating, gaskets, spanner sizes, Isometic and P&ID drawings

SURVEYOR FOREMAN Diploma in Civil Engineering-8+ Years-Must have experience in Survey related works in that 5 years oil & gas is required. Able to perform Topographic survey and establish control point; able to prepare survey reports and drawings.

SAFETY OFFICER Diploma in Mechanical / Chemical orBachelor's Graduate in Physics or Chemistry or Maths + Diploma in Industrial Safety / NEBOSH / IOSH-8+ Years-Minimum 5 years experience as HSE Personnel in Oil & Gas Construction. All other requirments as per KOC HSEMS Guidelines.

SAFETY SUPERVISOR Diploma in Mechanical / Chemical + Diploma in Industrial Safety / NEBOSH / IOSH-6 + Years-Minimum 6 Years of relevant experience as a minumum requirement in construction, maintenance of Tanks, Vessels and pipe line facilities in Oil & gas Industries. Prepare job safety anlysis, safety procedures for various jobs related to construction and maintenance of Tanks, Vessels and pipeline facilities in the Oil Companies. Familiar with relevan international EHS Standards

SUMMARY SAP MM (Material Management) Developer Location: Gurugram (Onsite) Experience Range: 4+ Years Notice Period: Immediate Job Description We are seeking an Application Developer with expertise in SAP MM (Material Management) to join our team. In this role, you will be responsible for designing, constructing, and configuring applications to meet business process and application requirements. You will collaborate with team members to understand project needs, develop application features, and ensure that the solutions align with business objectives. Additionally, you will be involved in testing and troubleshooting to enhance application performance and user experience, while continuously seeking opportunities for innovation and improvement in application development. Roles & Responsibilities Independently perform and become a Subject Matter Expert (SME). Actively participate and contribute in team discussions. Provide solutions to work-related problems. Assist in documenting application processes and workflows. Engage in code reviews to ensure quality and adherence to best practices. Professional & Technical Skills Must-Have Skills: Proficiency in SAP MM Materials Management. Strong understanding of application development methodologies. Experience with integration of SAP MM with other modules. Familiarity with data management and reporting tools. Ability to troubleshoot and resolve application issues efficiently. Additional Information The candidate should have a minimum of 3 years of experience in SAP MM Materials Management. This position is based at our Gurugram office. A 15 years full-time education is required. Requirements Requirements: Minimum 4-6 years of experience in application development. Proficiency in SAP MM Materials Management. Strong understanding of application development methodologies. Experience with integration of SAP MM with other modules. Familiarity with data management and reporting tools. Ability to troubleshoot and resolve application issues efficiently.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience • 1-4 years of experience in relevant design discipline • Experience in engineering packages Qualification • Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Shift Engineer Job Description: • To organize day to day, preventive & predictive maintenance of the equipment used for the air- conditioning & refrigeration. (Utility). 1. York makes Screw Compressor chiller 400 TR & 200Tr 2. Daikin McQuay make Chiller 400Tr 3. Centrifugal pumps, Sump Pumps, Air-handling Units & Fan Coils Units. 4. Cooling Towers, Air Compressor, Vacuum machine and Boilers Etc. 5. Laundry & Kitchen equipments, 6. Water treatment plant & STP plant 7. D.G. set 1250 KVA, Emergency lights & UPS. • • • • Preparing the PPM schedule & energy conservation plan & implementing the same. Carrying out PPM of public, back of house area & all utilities as per PPM calendar To follow daily maintenance checklist for all critical equipments. To look after the maintenance & operation of all utility such as Electrical, Plumbing, HVAC, Gas & Telephone network. • • • • Approaching to zero maintenance of all critical equipments. To check & monitoring the energy consumption of water, electricity & gas. To make sure that all equipments are operated as per S.O.P. Co-coordinating with agencies such as Reliance energy, BMC, MGL, MTNL, TATA telecom, Schindler lift, and Blue star for their regular services. Experience & Qualification • • B.E. Mechanical or B. E. Electrical, Diploma in Mechanical or Electrical At least 1 to 3 years experience for Degree holder or 8 to 10 years for diploma holder in Hospital & Hotel industry in engineering maintenance department (Utility) like Electrical, Plumbing, HVAC, Gas & Telephone network.

At Burns & McDonnell India (BMI OGC), you'll be joining the ranks of our Piping Design & Engineering team. You'll report to department & functional managers, and your focus? The engineering design of projects spanning across sectors such as Oil, Gas, Chemicals, Petrochemicals, Renewable Fuels, Decarbonization, and Carbon Capture. And these projects aren't limited to a local scale; they are positioned globally, reflecting our worldwide impact. You'll be a part of our vibrant Oil, Gas, and Chemicals (OGC) Global Practice, a thriving collective of around 500+ professionals. This dynamic group lives and breathes engineering, procurement, and construction projects across various industries - Refining, Midstream & Logistics, Petrochemical, and Chemicals. So, are you ready to take on challenges that shape industries and transform lives? Dive into the exciting world of Burns & McDonnell India, where your contribution will be part of our global footprint. Roles & Responsibilities: Analysis experience of Static & Rotary equipment. Nozzle load limit check, flange definition for flange leakage qualification, piping specials, and accuracy checking of Input. Analysis of Stress model for Code stresses check [Sustain, Expansion, Occasional stresses], Displacement, Flange Leakage qualification using ASME Sec VIII, Equipment Nozzle loads/ Pipe Support qualification wrt. to vendor allowable / as per applicable code / Qualification using Nozzle-pro (where applicable). Define Pipe Support requirement as per analysis and its support tagging and marking the stress comments on Isometrics. Preparation of support loads for Civil & Structural group. Preparation of documentation for Independent Quality Review. Preparation of procurement specification with log sheet for Piping Specials like Cold Shoe, Spring, Rod Hanger, Struts, Snubbers, Expansion joints, etc., their TBA, and vendor drawing review. Position may require interface and coordination with other engineering disciplines, designers, and detailers locally in the Mumbai office as well as remotely in various offices in the United States. Knowledge in Piping engineering, Conceptual pipe routing and layout, Pipe and Valve materials specification preparation, piping specials, technical bid evaluation, Vendor data review and approval, isometrics checking, and approval would be an added advantage. - Bachelor’s Degree in Mechanical/Chemical engineering 5-12 years of experience in detailed stress analysis associated with Energy/Oil & Gas projects. Advanced understanding and proficient experience of design software such as Caesar II, knowledge of AutoPipe is added advantage. Hands-on experience of Navisworks, SPR and Excel to develop design deliverables is preferred. Engineers having experience in preparation of Piping Material Specification will be preferred. Familiar with Energy/Oil & Gas industry codes and standards including ASME & API.

SUMMARY Welder We are seeking a dedicated welder to contribute to our company's success by maintaining machinery that fabricates and repairs metal structures, tools, and equipment. The ideal candidate will be responsible for completing welding and gas cutting tasks within specified timeframes while strictly adhering to safety protocols. Additionally, the welder will be expected to undertake fitting tasks assigned by the Maintenance Supervisor, maintain a clean and organized work area, and ensure compliance with safety regulations. Embracing the company's vision and actively participating in waste reduction efforts are also crucial aspects of this role. Key Responsibilities: Perform welding and gas cutting tasks within specified timeframes while adhering to safety protocols Execute fitting tasks assigned by the Maintenance Supervisor Maintain a clean and organized work area to hygiene standards Utilize correct techniques and specialized machinery for welding materials Inspect welded surfaces, structures, and components to identify errors Enforce strict safety regulations and monitor machinery usage and temperature Weld components in various positions and embrace the company's vision Actively participate in waste reduction and comply with company policies and procedures Support and promote the highest standards of hygiene within our company's Group Requirements Requirements: Key Technical Skills & Knowledge: Proficiency in various welding techniques, including TIG, MIG, arc, and oxy-fuel welding Familiarity with manual and mechanical welding techniques Ability to work independently Education/Qualification: Trade certificate in welding from a recognized institute Experience: Minimum of 3 years of experience as a welder