285 Gas Jobs - Page 5

We are hiring at SAEL Industries Limited for our upcoming Cell line project in Greater Noida, Uttar Pradesh location. Job Summary: Specialty and Bulk Gases AGM/DGM for 5 GW TOPCon Cell Line manufacturing Role & responsibilities Operational Management: Ensure reliable and uninterrupted supply of bulk and specialty gases (e.g., N, O, H, CDA,Silane, Phosphine, BCl,N2O) to all process tools across the solar cell manufacturing lines (including TOPCon/HJT). Maintain system integrity and process purity through preventive and predictive maintenance of gas cabinets, pipelines, VMBs/VMPs, valve boxes, and purifiers. Implement and sustain robust gas leak detection , alarm management , and safety interlock systems aligned with SEMI and NFPA standards. Drive 24/7 operational readiness by developing and enforcing SOPs, checklists , and safety protocols for utility systems. Ensure strict adherence to EHS protocols , explosion-proof zone classification, hazardous material handling norms, and statutory regulations (e.g., PESO, SMPV Rules). Team Leadership: Lead, mentor, and build a competent in-house utility operations team , including engineers, supervisors, and technicians. Define clear roles, training matrices, and skill development plans aligned to project and operational needs. Cultivate a safety-first culture , encouraging ownership and adherence to operational discipline. Performance Monitoring Establish KPIs for gas usage, downtime, purity compliance, and system efficiency. Monitor daily operations via utility dashboards and digital tools (SCADA, CMMS, etc.), and identify areas for continuous improvement. Conduct root cause analysis (RCA) for deviations or failures and drive corrective/preventive actions (CAPA) . Monitor gas consumption trends, optimize usage, and ensure cost-effective sourcing. Maintain stock levels of cylinders, spare parts, and accessories to avoid line downtime. Optimize consumption and minimize wastage through leak audits , flow tuning , and line conditioning best practices . Project Management: Spearhead the design, installation, and commissioning of bulk and specialty gas systems for the greenfield facility. Review and approve PFDs, P&IDs, layouts, hook-up drawings , and vendor documentation . Coordinate closely with EPC contractors, OEMs, consultants, and internal stakeholders to ensure project timelines, quality, and safety compliance. Drive procurement planning for long-lead items, consumables, and spare parts, ensuring readiness before production ramp-up. Stakeholder Communication: Serve as the primary liaison between production, process, QA, EHS, projects, and top management for all utility-related needs. Provide regular updates on gas system performance, incidents, and improvement initiatives through dashboards, reports, and review presentations . Interface with external agencies (e.g., PESO, safety auditors, gas vendors) for certifications, audits, and compliance requirements. Support cross-functional initiatives such as energy audits, cost optimization projects , and sustainability goals . Coordinate with Production, Process Engineering, EHS, Maintenance, and QA teams to meet utility demands and ensure plant readiness. Behavioral Skills: Demonstrates strong ownership mindset , taking accountability for plant uptime, team performance, and safety. Builds a cohesive and motivated team , promoting open communication, collaboration, and knowledge-sharing. Sets clear goals, monitors progress, and drives execution excellence in alignment with project and production timelines. Communicates effectively with cross-functional teams, senior management, and external stakeholders (e.g., vendors, auditors, regulatory bodies). Uses data and trend analysis to proactively identify inefficiencies or potential failures in gas systems. Applies structured problem-solving techniques like 5-Why, Fishbone, or FMEA to ensure long-term fixes Preferred candidate profile 12-20 Years (preferably in semiconductor, solar, or high-tech manufacturing industries)

Lead - Asset Creation – UP (Multiple Locations) Job Purpose: Manage bioenergy project execution in Uttar Pradesh, ensuring timely delivery, quality standards, and coordination across engineering and stakeholder teams. Key Responsibilities: Manage engineering tasks from planning to commissioning. Coordinate with design, procurement, and construction teams. Ensure compliance with safety, environmental, and regulatory norms. Critical Competencies: Strong technical knowledge in renewable energy systems. Experience in project execution and site coordination. Effective problem-solving and communication skills. Ideal Background: Bachelor’s in Mechanical, Chemical, or Civil Engineering. 8–15 years in project engineering, preferably in bioenergy or infrastructure. Familiarity with project tools, safety norms, and UP regulations. Key Metrics: Timely achievement of project milestones. Quality compliance across deliverables. Safety incident rate and resolution time.

project management in the EPC sector, specifically in Oil & Gas, fabricated items (vessels, tanks), site piping systems,CBG,water treatment projects. Oversee project lifecycle from design, procurement, fabrication, installation to commissioning.

As a Project Engineering Manager in the construction industry with over 14 years of experience, you will play a crucial role in the design and detailed engineering of Solar Power plants, ranging from Mini Grid to Megawatt scales. Your primary objective will be to manage the complete design process for projects, including coordination with disciplines such as Electrical, Instrumentation, and Mechanical. Leading a team of Lead Engineers, Design Engineers, and draftsmen, you will oversee and ensure that engineering activities are conducted within budget, delivered on time, and maintain a high quality of engineering standards. Your responsibilities will include managing the engineering activities for civil & structural aspects, covering various components such as substation/control room buildings, transformer foundations, outdoor equipment foundations, guard houses, staff quarters, grading, roads and drainage, outdoor steel structures, and other miscellaneous works related to Solar Power Plants and cabling works. In addition to your managerial duties, you will be expected to review vendor engineering documents related to Civil & Structural design, stay updated on new technologies, and adapt them to the business for cost-effective solutions. Proficiency in software tools such as Staad Pro, AutoCAD Civil 3D, Infraworks, Revit, Navisworks, and Global Mapper will be essential for carrying out your responsibilities effectively.,

Urgently Hiring Business Development Manager | Oman Industry: Oil & Gas | Client: Leading Company (Ex-DESCON preferred) Interview Mode: Virtual Requirements: * Bachelor's in engineering or MBA in Marketing * 812 years in sales/marketing (engineering industry) * Strong in project lifecycle & contract handling * Market research, competitor analysis, strategic positioning * QHSE knowledge & safe work practice experience * Excellent client handling & query resolution skills Benefits: Food, Accommodation & Transportation provided by the company Apply Now: hr55@fgheewala.com Call/WhatsApp: 7045867770

Inspector - Scaffolding Scaffolding Inspector shall have received an engineering apprenticeship or training in Scaffolding engineering and have had approximately Ten (10) years proven suitable experience. At least four (4) years shall have been in Inspector capacity, 2 years as Scaffolding Supervisor, and 3 years as a scaffolding craftsman. CISRS Certification is mandatory. ? Scaffolding Inspector shall have the CISRS standardized scaffolding inspector course certificate, or CISRS affiliates and internationally recognized statutory bodies such as C.I.T.B., SIMIAN SKILL, Safety & Access, NASC or AECOR. Should also have experience supervision during construction, inspection, and certification of scaffolding structures. ? Scaffolding Inspector educational qualifications: Preferably Diploma in Civil or Mechanical Engineering discipline or standards-based qualification ? Shall carry relevant training competency card when working on site ? Scaffolding Inspector must be able to interpret engineering drawings and have a sound knowledge of Oil and Gas industrial plant safety, ? Scaffolding Inspector must have a fairly good knowledge & understanding of Scaffolding codes of practices and relevant British standards. ? Scaffolding Inspector must have worked on major jobs. ? Scaffolding Inspector shall demonstrate an understanding of HSE issues, ? Scaffolding Inspector shall be capable of performing all necessary administrative Work. Administrative Work(s) may include, but shall not be limited to, records maintaining etc, ? Scaffolding Inspector must be capable to input required data for the COMPANY computerized engineering administration system and submitting daily report, ? Shall have experienced in scaffold measurement sheet, and should be able to update scaffold register and keeps inspection records (check sheet). ? Be able to exert full disciplinary and trade control over the artisans for any modification during inspection, ? Be able to communicate in the English (IELTS 5 Equivalent) and the language of his artisans. ? Shall be certified medically fit for scaffolding Works and Work at height.

Application Deadline: 11 August 2025 Department: Instrumentation Controls Employment Type: Full Time Location: Pune, MH, India Description Equinox Engineering Ltd., a leading EPCM firm headquartered in Calgary, specializes in oil and gas processing, providing comprehensive services in facilities design, implementation, and operational support for natural gas, conventional, and heavy oil projects. Our clientele includes major oil and gas producers in Canada and globally, and we are actively engaged in diverse sweet gas, sour gas, conventional oil, heavy oil facility, and pipeline projects. Job Overview: Instrumentation and control engineers work on measuring and controlling instrumentation. They also service plant process control, monitoring, safety and communications systems. They are knowledgeable in overall plant systems and interactions of processes. Key Responsibilities Create Instrumentation & Automation engineering documentation including datasheets, P&IDs, control narratives, instrument indexes, control specifications and installation design details. (Knowledge and experience applying codes and standards such as CSA, API, ANSI and ISA would be an asset). Knowledge of various electrical components including MCCs, PLC equipment panels and motors. Review engineering and construction work packages for content accuracy and quality standards. Review vendor and shop drawings for design compliance. Prepare engineering QC document as per company and client standards. Provide and demonstrate leadership in accordance with Environment Health and Safety program to establishing a strong safety culture within the organization and ensure compliance with health and safety regulations and quality standards. Assist in selection of discipline personnel assigned to projects. Monitor/supervise the work of junior executors and assist with mentorship and training. Interface with the other engineering disciplines to ensure a coordinated design and that project engineering deliverables are completed. Direct and/or participate in job site visits to collect or deliver design and engineering data. Direct and/or participate in vendor drawings reviews to ensure design accuracy and compliance with specifications. Direct and/or participate in inspections/testing of instrumentation systems/ vendor skid packages. Design, configuration, integration and implementation of process control solutions. Assemble bid, approval, and construction issue drawing packages. Key Skills and Abilities Specify and purchase field instruments including electronic and pneumatic transmitters, switches, meter-runs, analyzers, control valves and ESD valves. Excellent computer skills including use of engineering and computer software to complete control valve, PSV and flow meter sizing. Knowledge and experience applying codes and standards such as CSA, API, ANSI and ISA. Proficient in the use of Smart Plant Instrumentation (Intools) software. Requires a broad knowledge of the application of engineering to plant constructability as applied to construction methods and materials, and the economics involved. Experience in Oil & Gas facility projects including some of the following areas: heavy oil facilities, well tie-ins, pipelines, compressor stations, and field gas processing facilities. Education and Qualifications: Degree in Instrumentation Engineering. 5+ years oil & gas experience, preference for an EPCM background. Our People and Culture: Flexible Work Schedules for a healthy work-life integration. Abundant growth opportunities, mentorship programs, and continuous learning initiatives. Our Environmental Commitment: Equinox believes in a balanced energy future. Our projects, from Carbon Capture and Sequestration to Renewable Natural Gas, exemplify our commitment to an environmentally responsible energy sector. Equinox Success Statement: Equinox consistently delivers focused and experienced premium teams, custom-tailored with the best technical expertise to align seamlessly with client culture and requirements. Our commitment ensures the successful execution of projects on a repeatable basis.

Application Deadline: 7 August 2025 Department: Electrical Engineering Employment Type: Full Time Location: Pune, MH, India Description Equinox Engineering Ltd., a leading EPCM firm headquartered in Calgary, specializes in oil and gas processing, providing comprehensive services in facilities design, implementation, and operational support for natural gas, conventional, and heavy oil projects. Our clientele includes major oil and gas producers in Canada and globally, and we are actively engaged in diverse sweet gas, sour gas, conventional oil, heavy oil facility, and pipeline projects. Job Overview We are seeking a highly skilled Electrical Engineer to join our team in Pune, India. As an integral member of our organization, the successful candidate will play a key role in the design and execution of electrical engineering projects, particularly within the oil and gas sector. The position requires a candidate with strong communication and interpersonal skills, coupled with expertise in medium and low voltage power distribution design, protective relaying, motor control systems, area classification specifications, electrical equipment sizing, and PLCs Key Responsibilities Key Responsibilities: Involved in designing, for detailed electrical engineering activities. Preparation of Project documents (MR, Data sheets, LOTA, MTO). Preparation of Electrical documents (Cable Schedule, Cable Sizing, Earthing calculation, Power & Control JB Wiring, Panel Schedule, Cable Tray Schedule) Preparation of Single Line Diagrams. Preparation of Design Basis Memorandum, Data sheets, Enquiry & Purchase Specifications along with Sizing calculations for various Electrical equipment like Power and Distribution Transformers. Preparation of load list, SLD, Electrical Schematic diagrams. Interface with the other engineering disciplines to ensure a coordinated design and that project engineering deliverables are completed. Interface with project team and vendors to define project scope, resolve technical issues, and prepare procurement (bid) documentation & technical specifications. Key Skills and Abilities Must possess strong communication skills and interpersonal skills. Experience in Concept, Study, BEP/FEED & Detailed Engineering Activities for EPC & EPCM Projects in Offshore/Onshore (Upstream & Downstream) Oil & Gas, Petrochemical Plant. Familiar with IEC, BS, IS, CSA, API, IEEE, NFPA standards. Preparation of load list, SLD, Electrical Schematic diagrams, Power system studies & report (ETAP/SKM). Preparation of Design Basis Memorandum, Data sheets, Enquiry & Purchase Specifications along with Sizing calculations for various Electrical equipment like Power and Distribution Transformers, GTG, HV & LV Switchboards (IMCS), Data Concentrator Panel, HV & LV Emergency Diesel Generator set, HV & LV Variable Frequency Drives (VFD), HV & LV Motors, HV & LV Cables, LV Bus duct, AC & DC UPS system, Lighting system, Local Control Station, MCT, Electrical Heat Tracing, Electrical heaters, Fire Alarm system, Public Address system etc. Substation sizing and Electrical equipment layout including Containerized Room. PDS, PDMS & Bentley 3D Model review. Education and Qualifications : Professional Engineer (P. Eng) with an Electrical Engineering degree. 10 years of experience in electrical engineering within the oil and gas industry. Design Engineering background is a must. Experience in Oil & Gas facility projects, including heavy oil facilities, well tie-ins, pipelines, compressor stations, and field gas processing facilities. Familiarity with various electrical codes and standards (e.g., CSA, IEEE, API). Ability to coordinate with other engineering disciplines is required. Our People and Culture: Flexible Work Schedules for a healthy work-life integration. Abundant growth opportunities, mentorship programs, and continuous learning initiatives. Our Environmental Commitment: Equinox believes in a balanced energy future. Our projects, from Carbon Capture and Sequestration to Renewable Natural Gas, exemplify our commitment to an environmentally responsible energy sector. Equinox Success Statement: Equinox consistently delivers focused and experienced premium teams, custom-tailored with the best technical expertise to align seamlessly with client culture and requirements. Our commitment ensures the successful execution of projects on a repeatable basis.

SUMMARY Job Title: Refrigerator, Air Conditioner, and Cooler Repair Technician Job Responsibilities: Diagnose and repair faults in refrigerators, air conditioners, and coolers. Install, maintain, and service refrigeration and cooling systems. Perform regular preventive maintenance to ensure equipment operates efficiently. Replace or repair faulty parts such as compressors, motors, thermostats, and valves. Ensure proper gas charging and leakage checks. Maintain tools and equipment in good working condition. Provide timely service and maintain high standards of workmanship. Requirements Requirements: Minimum 3 years of hands-on experience in repairing refrigerators, air conditioners, and coolers. Strong knowledge of refrigeration and air conditioning systems and components. Ability to read and understand technical manuals and wiring diagrams. Experience working independently on-site or at client locations. Basic proficiency in English for communication and reporting. Physically fit and able to work in various environments. Benefits Employment Details: Salary: 150 OMR per month Working Hours: 10 hours per day Day Off: Friday (weekly holiday) Accommodation: Provided by the company Other Benefits: As per company policy

ASME Boiler & Pressure Vessel (BPV) Code inspections of pressure equipment—boilers, pressure vessels, piping, welding, testing—to ensure full compliance with ASME, National Board, and applicable jurisdictional regulations Roles and Responsibilities Conduct shop and field inspections (internal/external) at critical stages of fabrication and assembly . Witness hydrostatic/pneumatic/proof tests and non-destructive examinations (NDE) as required nsure proper calibration and verification of inspection and test equipment Maintain the ASME Inspector Diary noting daily inspections, findings, and witnessing events Confirm use of valid ASME BPV Code editions, materials certifications (MTRs), metallurgical traceability, and quality records Review and verify engineering drawings, specifications, and design calculations against code requirements Verify WPS, PQR, welder/operator qualifications and conformance of repairs to the ASME Code Identify, document, and report nonconforming conditions. Ensure corrective actions are implemented and closed per the quality program Verify that all ASME BPV Code conditions are satisfied before applying the Ustamp and ensure correct application of nameplates and National Board registration marks. Attend joint reviews with Certificate Holder and AI Supervisors as needed

As a Plumber, your main responsibilities will include reading blueprints and drawings to understand or plan the layout of plumbing, waste disposal, and water supply systems. You will be expected to cut, assemble, and install pipes and tubes with attention to existing infrastructure such as electrical wiring. Additionally, you will play a crucial role in installing and maintaining water supply systems, as well as locating and repairing issues with water supply lines like leaks. Your duties will also involve repairing or replacing broken drainage lines, unclogging drains, fixing faucets, and handling repairs of domestic appliances like washing machines and fixtures such as sinks. Furthermore, you will be responsible for the installation and maintenance of gas and liquid heating systems, including air-conditioning units and radiators. Ensuring the proper functioning of waste disposal and sanitary systems with well-maintained DWV systems will also be a key part of your role. This is a full-time, permanent position with benefits that include provided food. The work schedule involves rotational shifts, and the ideal candidate should have a total of 2 years of relevant work experience. The work location will be in person.,

Knowledge about import and export Product knowledge about operational, calibration, hi pure NABL certificate, CO, Propane, Methane, N-Butane, Krypton etc

SUMMARY Job Title: Construction Foreman Job responsibilities: We are seeking a Construction Foreman with hands-on experience in wood and iron construction and installation, as well as familiarity with ceramic or granite materials used in construction. The ideal candidate will demonstrate exceptional site management skills and possess a thorough understanding of site maps. Key responsibilities will include adjusting columns during the building process and overseeing the overall construction activities. Working Hours and Compensation: Working hours: 6:30 am to 5 pm Overtime: Every 4 hours of overtime counts as half a day Accommodation: Provided with water and electricity Vacation: Fridays Salary: Calculated based on the number of working days, with a rate of 9.5 riyals per day Requirements Requirements: Preference will be given to candidates with prior Gulf experience Gulf experience is highly preferred Benefits 2 years employment visa Good Salary Accommodation flight ticket

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience • 10+ years of experience in relevant design discipline • Experience in engineering and package coordination Qualification • Postgraduate or graduate in an engineering discipline • Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning’s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

O&M Technician / Engineer Mechanical, Electrical, Instrumentation, SCADA (Pipeline Operations) This is a contractual position under IHB Limited , a joint venture of IOCL, HPCL, and BPCL, for Operation & Maintenance (O&M) support in pipeline facilities. Selected candidates will be deployed in Jhansi / Kanpur / Unnao / Jalaun locations as per requirement. Contract Duration: Initial period of 1 year , which may be extended for another 1 year based on project requirement and performance. Role & responsibilities Mechanical maintenance services Scope of work under mechanical maintenance services are as under but not limited to: i. The emnployee has to carry out day to day mechanical jobs of all kinds (e.g. lubrication of machines, handling of coolants, lubricants, and carry out predictive, preventive, breakdown maintenance) as per schedule under Maintenance Base for the KGPL pipeline associate dispatch terminals, KGPL delivery stations & Pipeline. ii. The services involve carrying out maintenance of all kinds of valves (e.g. gate, globe, safety, NRV, ball valves, etc.) including greasing, sealant injection, removal and erection of the same installed at all Pipeline installations. iii. The scope of work of the employee also includes but not limited to the identification and repair of any kind of leakages in various mechanical components (the job may include replacement of damage sections or re-assembling of new spare parts or any other activities pertaining to the above purpose) in the locations as per the instructions of reporting manager. iv. Providing mechanical assistance to any other jobs as advised by Officer-in-charge for smooth operation of pipeline. Providing assistance in Fire & Safety activities and Maintenance of firefighting equipment. v. Annual maintenance of basket strainer/ filter vi. Servicing of scraper barrel- launcher including opening and closing vii. Station piping thickness measurement viii. Monitoring of equipment parameters on a pre-defined periodic basis ix. Condition monitoring of equipment & calibration of equipment as per requirement x. Oil flushing / vapour-locking removal on as and when required basis. xi. Maintenance of equipment of various sizes installed like HOVs, MOVs, NRVs, Strainers, Density meters, Pipeline of all sizes (above ground/underground), Pig receiver & launchers, Density meter, flaring unit, etc., flow meters etc, basket filters, Flow control valves and any other jobs, not specifically mentioned but as advised by Officer-in charge for smooth operation of pipeline. xii. Assistance in all types of maintenance (Preventive/Breakdown) of all mechanical equipment including DGs at various SV stations and receipt facilities. xiii. Providing mechanical assistance to any other jobs as advised by Officer-in-charge for smooth operation of pipeline. xiv. Providing assistance in loading, unloading, packing and unpacking of any material received. xv. Cleaning and removing oil stains from all equipment. xvi. Stacking of maintenance spares and equipments in proper place. xvii. Providing assistance in Fire & Safety activities and assistance in Maintenance of firefighting equipment as per requirement. xviii. Assistance in housekeeping and cleaning of all pipeline equipment, warehouse spares etc. are also in the scope of these services. xix. Any other jobs as per direction of Nodal officer/ Supervisor/Client. Electrical Maintenance services: Scope of work under electrical maintenance services are as under but not limited to: i. Maintenance services to be provided in carrying out Preventive & breakdown maintenance for Transformers, UPS System, DG Alternator, HT /LT panels, JBs, MOVs (Motor Operated valves), Battery banks, Battery Chargers, earthing system, FW system, solar system, various plant lighting equipments, exhaust fans, ceiling fans, distribution boards, flame proof lights, flame proof fittings etc., which shall include cleaning, tightening of nut bolts, dismantling & assembling of Terminal boxes, cable connections & disconnections, meggering, taking specific gravity & cell voltage of battery banks, taking earth resistance measurements etc., as per the instructions of EIC/Site Engineer at Maintenance Base for the KGPL pipeline KGPL delivery stations & SV stations. ii. House Keeping of Pipeline Substation, other electrical panel rooms and Control Room. iii. Measurement and testing of Electrical system as per OISD guidelines and maintain the record like Earthing Testing, ELCB testing, Integrity of FLP system at field etc. iv. Insulation Testing & megger test of LT Cable and Equipment along with winding resistance tests, Calibration of measuring instruments, transducers etc. v. Maintenance of lighting system in the building and in the field. vi. DG Set Operation and maintenance and necessary power source changeover and assisting SV stations and IPS station guards from control room to take necessary switchover of power sources as & when required in any shift as per SOP. vii. Assistance in installation of new instruments / equipment, wiring modification in existing panels. viii. Maintenance & Operation of Battery bank, UPS, Solar Inverter & Solar Plant at all SV stations and IPS, TR and CPPSM Unit for CP, Fire Alarm System, Clean Agent system, Telecom and VHF system and any other system as directed to the contractor/ supervisor by IHB officer In-Charge. ix. Energy consumption readings, CP readings, Monitoring and keeping as directed to the contractor/ supervisor by IHB officer In-Charge. x. Follow up and coordinate with sub vendor for rectification / servicing /overhaul of various electrical equipment as directed to the contractor/ supervisor by IHB officer In-Charge. xi. Carrying of Distilled water and Diesel for various SV stations as and when required. (Transport of material and supply of material is in IHB scope.) xii. Electrical fitting jobs in the station and SV station, cleaning & maintaining electrical spares xiii. Assistance in maintenance of LT equipment with Vendor if required or as directed to the contractor/supervisor by IHB officer In- Charge. xiv. Liaison with State Electricity Board or Upstream power source units xv. Any other job as directed to the contractor/ supervisor by IHB officer In-Charge. Testing & Inspection Maintenance services: Scope of work under T&I maintenance services are as under but not limited to: i. To carry out maintenance (Preventive, Predictive and Break-down), removal, calibration and re-installation of all the field instruments such as transmitters, gauges, pressure/temperature/level switches, temperature elements, safety valves, control valves, sensors, mass flow sensor / mass flow transmitter etc under Maintenance Base for the KGPL pipeline delivery stations & SV stations. ii. The scope of work also includes but not limited to carrying out impulse tubing, preparation of ferrule joints of various sizes, identification & rectification of leakages from various instrumentation fittings, tubing connections. iii. Maintenance and Upkeep of all Instrument panels and Marshalling racks. Providing assistance in preventive maintenance of various instrumentation panels including cleaning of control panels/instruments, cable trenches etc., providing substantial assistance for loop checking, wiring, cable dressing, glanding and laying of instrumentation cable, cable tray laying etc. Assisting in maintenance of PLC system, Operator stations, flow computers, all panel instruments. iv. Installation and mounting of any new instrument if required. Upkeep and Helping in documentation, drawings etc. v. To assist IHB Engineers in dismantling, servicing, calibration and re-installation of PCVs, FCVs, Safety valves etc. vi. Removal of Pressure/Temperature/Level Switches, Indicators, Transmitters, Gauges from field and installation /re-installation of the same in the field as per the instruction of IHB engineer. vii. To assist IHB engineers in calibration, functional check, servicing of instruments. Instrumentation tubing and wiring works to be required on specific need basis. viii. Maintenance & Checking of Gas and Smoke/Heat detectors, Fire Alarm Panel / Gas Detector Panel & Co2/Argonite flooding system. ix. To assist IHB engineers in removal, servicing, testing and installation of all safety valves. x. Maintenance and Upkeep of all Instrument panels and Marshalling racks. xi. Instrumentation tubing and wiring works to be required on specific need basis. xii. Tagging of all field instruments, sealing of safety valves, replacement of terminals, annunciator bulbs replacement. xiii. Any Specialized Instrumentation Works/ jobs not mentioned above however required to be carried out on specific need basis. Round the clock Operation related support services: Scope of work under Round the clock Operation services are as under but not limited to at the different Work Points of Bottling Plants under KGPL:: a) The scope of work includes round the clock services to operations related works and control room in monitoring of field parameters and utility services operation in pump stations under KGPL. i. Shift operation at receipt facilities ii. Round the clock monitoring of the performance & operation of various field equipment, station utilities and instruments. iii. Noting down of parameter in register on frequent interval. iv. Reporting of any abnormality or malfunction. v. Basic ARC jobs related to civil jobs. vi. Following safety guidelines issued from time to time. vii. Monitoring and recording of all operational parameters as per specified formats. viii. Any other job as per the instruction of Shift- in charge / Station- in charge / EIC. ix. Attending all types of telephones/walkie-talkie & passing information to concerned x. Documentation & Filling of process/operational related papers, Record Keeping General Services: Assistance in housekeeping, fire & safety drills, and emergency handling. Miscellaneous jobs like excavation, material handling, surface dressing. Preferred candidate profile Candidate Requirements: Highly skilled - The services to be provided through professionally qualified personnel preferably with B.E. /B.Tech. (Bachelor of Engineering/Technology) in relevant field, i.e. Mechanical/ Electrical with minimum of 01 Yrs. Experience. Skilled - The services to be provided through professionally qualified personnel preferably with Diploma of engineering / discipline in Mechanical/ Electrical/ Electronics & Communication or Instrumentation with 1 years experience/ ITI in with 2-year experience. Semi-Skilled - The services to be provided through adequately qualified assistant preferably 10th Pass or higher with 03 Yrs. Industry experience. Candidate Requirements: Salary Structure: Important Terms Salary is fixed as per Central Govt. Minimum Wage Act. Wage revision will only be done in April & October as per CLC. Accommodation, food, and travel expenses are to be managed by the employee from within the CTC. No additional perks or allowances. PPE & Uniform will be provided by the company. CTC includes PF, Bonus, Leave, and Gratuity components. Jhansi (Wage Area B): Highly Skilled: 35,508.64 CTC / 27,308.44 In Hand Skilled: 32,307.65 CTC / 24,846.67 In Hand Semi-Skilled: 27,506.18 CTC / 21,154.03 In Hand Kanpur (Wage Area A): Highly Skilled: 38,523.53 CTC / 29,627.08 In Hand Skilled: 35,508.64 CTC / 27,308.44 In Hand Semi-Skilled: 32,307.65 CTC / 24,846.67 In Hand Kanpur/Jhansi (Wage Area C Common): Semi-Skilled: 22,853.57 CTC / 17,575.87 In Hand Skills: Equipment maintenance, SCADA operations, safety compliance, technical documentation. Other: Willing to work in shifts and travel locally (Jhansi/Kanpur/Unnao/Jalaun). For any queries, you may write to us at join@knowteqconcepts.com

SAFETY OFFICER Bachelor Degree or Diplomawith minimum 5 years experience as HSE personnel in oil and gas, petrochemical industry. Must have successfully completed one or more certified HSE course (Nebosh). Monitoring & Identifying hazard and corrective action shall be taken to reduce the risk to avoid accident, incident and damage of Properties.

SCAFFOLDING SUPERVISOR Bachelor Degree or Diplomawith minimum 5 to 10 Years experience in scaffolding jobs. Knowledge about scaffolding tools and scaffolding materials Knowledge about safety to work in scaffolding. Should work safely to executethe scaffolding jobs along with group of employees. Should pass the job rep training in Equatefor taking the permit EPPS to execute work.

INJECTION MOLDING TECHNICIAN 1. Set up & operates injection molding machine. 2. Mix raw material with pigment. 3. Set up machine parameters 4. Perform mold changes, minor repairs, preventive maintenance on the machine and auxiliary equipment as needed. 5. Ensure the product is consistent with established specification through continuous monitoring. 6. Responsible for line production target. 7. Maintain a clean, sanitary and safe work area. 8. Perform other duties as assigned. Qualifications: Diploma/ITI in Plastic +3 Years of relevant working experience in Injection Molding Process Attractive Salary, Food Allowance, Accommodation & Transportation provided by company.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position To ensure strict implementation of safety practices and statutory compliance on the civil construction site, aiming to prevent accidents, ensure health and safety of all workers, and promote a strong safety culture across the project. Experience • Minimum 5 – 10 years of onsite experience on major projects under any sector – Infrastructure, Real Estate, Power, Steel or Chemical • Involvement in at least 2 significant major project similar in size and scope as delivered by TCE Qualification Diploma/Degree in Engineering (Civil preferred) with a Diploma in Industrial Safety (recognized by a State Government or AICTE). Minimum 5 –10 years of experience in EHS/Safety roles in civil infrastructure or industrial construction projects. Knowledge of relevant safety laws, IS codes, OSHA / ISO 45001 standards. Certification in First Aid / Fire Fighting is preferred. Key Responsibilities 1. Monitors overall job site health, safety and environment performance and verifies that contractors are protecting their workers at the job site. 2. Responsible for construction supervision and contract administration including supervision of contractors and their subcontractors for assigned portions of the project. 3. Implement and enforce safety procedures, policies, and guidelines in alignment with company standards and legal requirements. 4. Conduct daily toolbox talks, site safety audits, and inspections to identify hazards and unsafe practices. 5. Monitor high-risk activities like excavation, scaffolding, concreting, formwork, working at heights, and ensure proper control measures. 6. Prepare and maintain safety documentation including incident reports, near-miss reports, safety observation reports, and risk assessments (JSA / HIRA). 7. Ensure that all personnel on site use proper PPE and follow safe work procedures. 8. Coordinate and conduct EHS training and awareness programs for site workers and staff. 9. Liaise with contractors, vendors, and project teams to enforce safety protocols and compliance. 10. Investigate incidents/accidents and recommend corrective and preventive actions. 11. Ensure emergency preparedness including mock drills, first-aid readiness, and fire safety. 12. Ensure compliance with local labour safety regulations, IS codes, and TCE's EHS Management System. 13. Support in achieving zero-incident goals and safety KPIs set for the project. Competencies

Role - Assess, Design, Develop and Maintain multiple OTS Systems. And conduct Dynamic Simulation studies. Job Accountabilities Finalise FDS Built complex models/ Review models Standardise development of integration & interfacing models/methods. Define project charters, implementation plan and Review/update/ modify Project Proposals Review Installation/configuration of OTS. Work on new development activities in the field of OTS. Resolve critical process/system related advanced issues faced by customers. Coordinate with key stakeholders/functional owners for implementation & embedding of the new process/system," Review and evaluate various Vendor software and services Risk management & Strategic Evaluation - including Licensing and Coordination with Vendors Finalise scope and validate data/information. Preparation of Annual plan Conduct MAT/FAT/UAT /SAT as applicable Translate usability and field implementation findings into design improvements. Communicate with internal teams & external clients to deliver functional/ system requirements. Design/propose remote connectivity, integration between different systems e.g. DCS and Control/Automation systems Review standards/SOPs/test procedure (FAT/UAT/SAT) Deliver OTS models with-in budget and time lines Lead the development of multiple OTS projects Other: Stay updated with automation systems upgrades/changes and its impact on existing implementations Implement automation systems upgrades Enhance automation system effectiveness Data Management Inter-site OTS performance report compilation Document various training & best practices related materials Keeping the data management for OTS updated. Publish Benchmarking reports Documentation of Various vendor documents & licensing details HSE & Other Regulatory Compliance: Ensure compliance with HSE procedures Ensure compliance with applicable local environmental site, statutory regulations applicable Skills Required (Knowledge and Skills) Proficiency in various OTS related software. Mentoring of subordinates & team members and ensure knowledge continuity Conduct end user and power user training Key Attributes (Experience and Qualifications) Min. BE/B Tech in Chemical Engineering from a reputed institute Min 10-12 years of experience in refinery / petrochemical industry with at least 8 years in OTS Knowledge of process technologies used in refining / petrochemical industries

• Should be able to perform process & utility calculations • P&ID development and Line list • Equipment sizing and specifications (i.e. Vessels, pumps & packages ) • Review of vendor documents & TBA preparation Required Candidate profile • Lead & mentor a small team of junior engineers • Interacting with client & vendors • Interacting with project & other disciplines • Proficient in Hysis & Aspen plus

Application Deadline: 7 August 2025 Department: Mechanical Engineering Employment Type: Full Time Location: Pune, MH, India Description Equinox Engineering Ltd. is a Calgary-based EPCM firm. We are a market leader in oil and gas processing specializing in facilities design, implementation and operational assistance for natural gas, conventional and heavy oil projects. Our clients include several of the largest oil & gas producers in canada and worldwide, and we are currently executing a wide range of sweet gas, sour gas, conventional oil, heavy oil facility and pipeline projects. Key Responsibilities Complete mechanical deliverables (Line Designation Tables, Mechanical Equipment Lists, SP Item Lists, Piping Registration Packages) Prepare piping wall thickness calculations. Prepare Material Requisition packages for different types of mechanical equipment (vessels, pumps, compressors, heat exchangers, piping and valves) Prepare technical bid evaluations for mechanical equipment. Prepare material take offs (MTOs) for pipe, valves and fittings. Review vendor drawings to ensure compliance with client/project specifications. Be familiar with piping and equipment Codes and Standards (ASME, API, CSA) Key Skills and Abilities EPC work experience is an asset. Must possess strong communication and interpersonal skills. Good working knowledge of Static and/or Rotating Equipment Design. Experience working on North American projects is an asset. Education and Qualifications: •Mechanical Engineering Degree •8+ years mechanical engineering experience, preference for an EPC background. •Familiarity with ASME B31.3, ASME Section VIII and or API 610/617 Our People and Culture: Flexible Work Schedules for a healthy work-life integration. Abundant growth opportunities, mentorship programs, and continuous learning initiatives. Our Environmental Commitment: Equinox believes in a balanced energy future. Our projects, from Carbon Capture and Sequestration to Renewable Natural Gas, exemplify our commitment to an environmentally responsible energy sector. Equinox Success Statement: Equinox consistently delivers focused and experienced premium teams, custom-tailored with the best technical expertise to align seamlessly with client culture and requirements. Our commitment ensures the successful execution of projects on a repeatable basis.

Job Role: Field Executive SECTION I: BASIC INFORMATION ABOUT THE JOB ROLE Job Role Variant: Field Executive Value Stream: Asset Operations Job Family: Manufacturing Sub-Job Family: Operations SECTION II: PURPOSE OF THE ROLE To perform operations and maintenance of all the equipment's and facility and drive smooth and safe operations of the plant in order to ensure that production targets are met, while maintaining safety and quality standards as per RIL policies and guidelines. SECTION III: KEY RESPONSIBILITIES AND ACCOUNTABILITIES OF THE ROLE Responsibilities Shift Production align with EPS movement plan. Coordination with Respective Solids Coke LO. Coordination with Respective PCG-MHS team. Ensure safe vehicle movement on ramp. Implement Dumper Checklist, TBT, ReSOP, HITRA and PTW system at site. Ensure effective utilisation of PCCS SOPs. Ensure product quality and Quantity: 1. Visual checking of Particle size 2. Maximize train production by regular monitoring. 3. Ramp condition by maintaining the Ramp without Pot hole or other abnormalities. Ensure safe movement of Vehicles: 1. Avoid hitting the stopper of Feed Hopper & unloading material on Ramp 2.Avoid littering in open area by truck crew. 3 Vehicle should allow to Feed Hopper on FIFO logic. 4.Maintain safe distance between two truck Effective utilisation of Safety procedures by O&M contractor staff Maintain daily reports for PCCS Safety, Performance and Improvement as per requirement with SAP transaction details. Safety & Risk Assessment - Support in regular risk assessment during hand over, take over and process jobs, and conduct tool box talk prior to job execution to reinforce safe work practices - Execute process related activities in line with safety operating procedures within operating range to mitigate process failures as well as reduce accidents, incidents and injuries - Identify, document and report near miss incidents to identify trends and prevent future occurrence of similar incidents - Ensure adherence to latest safety and management guidelines like, IMS ISO TQM, OMS,PSM QCC, 5S etc. - Ensure adherence to LOTO, N2 gas safety, Line break etc. procedures SECTION IV: SUCCESS METRICS - Number of work place related incidents in the plant - Number of field round (ODR) - Number of entries in the SD job register - Housekeeping of the plant SECTION V: OPERATING NETWORK Internal: - Site Operations Team, Compliance Team, Health & Safety Team, HR Team External: - Vendors, Regulators, Local Communities SECTION VI: KNOWLEDGE AND COMPETENCIES Education Qualifications Diploma in Mechanical Engineering Experience (Must Have) 3-5 years of experience as field executive in site operations Functional / Behavioural competencies required to execute the role Functional Competencies - Knowledge of general operations - Knowledge of manufacturing & troubleshooting - Knowledge of sampling & analysis - Knowledge of equipment start-up and shutdown - Knowledge of maintenance handover & takeover

Note- Hiring only male candidate based in Chandigarh (Tricity region) Key Responsibilities: Conducting exhaustive secondary research (through databases, annual reports, company websites, government and ministry websites, journals) Data mining and research database management Analysis of market dynamics, industry variables, competitive intelligence, and other market information Data analysis and visualization using relevant software like Tableau. Assisting with writing the market research reports

MECHANICAL (AUTO MOBILES) FOREMAN All candidates must have Oil & Gas Maintenance experience in GULF countries. Attractive Salary, Food Allowance & Accommodation provided by company. Education: Minimum Diploma in Mechanical Engineering (3 years) or equivalent Experience: Have a minimum 08-15 years of experience in Oil and gas Industry and related certifications shall be provided Age limit : Not over the age of Fifty-Three (53) years old. Pre-Qualification and Certification To be provided related TPI Certificates and experience letters. Must have Driving License, preferable Qatar driving License. Knowledge in Arabic language (Read and speak) to convey requirement in Govt. Offices Preferable PTW Certification and H2S certificates from safety team To be ensured the knowledge in computer literate and preferably MS Office and SAP familiar with computer based Equipments maintenance records management system. Job Description -MECHANICAL (AUTO)FOREMAN Primary Purpose of the SERVICES Dedicated Mobile and Electrical Lifting Equipments Maintenance Technicians, experience in Oil &Gas industry, with experience in conducting repairs, diagnoses cause of problems and take corrective action to resolve issue to make equipment in working condition. - To be ensured the knowledge in Bi-annual Inspection attended and conducted of Visual Inspection, Load testing, Color coding of Rigging, lifting equipment and Rigging gears, as per the standards and procedures. - To be ensured the knowledge in maintain the records repairs, other consumption of consumables parts including lubricants, tires, filters, Batteries, Fire extinguisher and parts used for the servicing of heavy equipment and maintain related warranty and guaranty reports. Summary of Major Duties and Responsibilities To be carried out all type of Lifting Equipment's (Mobile and Electrical) maintenance and Perform Service, repair of a variety of Heavy Equipment, Lifting Equipment, Automotive equipment such as Forklift, Mobile & Gantry Crane, Winches, Hydraulic Lifting Equipment, Generator, Welding Machines, Air compressor maintenance equipment, Tools & tackles and other special purpose or types of Lifting equipments. - Determines Heavy Equipment & Lifting Equipment condition by conducting visual inspections and diagnostic tests to identify and damage parts. - To be Preformed the disassembly and assembly of Engines, Transmission, Gear box, Hydraulic Cylinders, Hydraulic Pump and hoses. - To be able good written and verbal communication skills, ability to give clear direction to support staff and field personnel to understand the risk. - To be prepared as per the site requirements the PTW and follow for further approval and to be ensured that all the work performed safely as per the PTW precaution and guidelines. - To be ensured the required Safety TBT to be done and take all the concern team signatures, before the execute the job and maintain the record. - Preferable for Rigging Supervisor knowledge, to do the site visit to select right rigging tools and to provide the equipments to Rigging team. - To prepare the required JHA job hazard analysis report related Lifting and Rigging equipments safety assessment, to meet as per safety standards and procedures. - To be ensured the after job completion, concern site area housekeeping to be done by all safety manner and safety procedures. - To be ensured the proper information and communication provide time to time to Heavy Equipment supervisor to manage the further schedules. - Ability to keep maintain records of preventative and corrective maintenance repairs proper records of all Heavy Equipment, rigging tools, Crane & Lifting Equipment, Inform to the Heavy Equipment supervisor for any new requirement or replacement of spare parts, tools and consumables repaired along with time spent on such equipment for future reference.