18 Fuel System Jobs

Job Summary of CAE And Powertrain Integration You will work towards performing complex design analysis using CAE to support engineering design function, understand customer requirements and expectation for new product design and suggest alternate improved design to resolve any challenges and will drive and lead the team towards accurate and efficient design and integration of systems including Engine cooling system, Engine mounting system, Exhaust integration, Fuel system and its auxiliaries and Air intake system CAE And Powertrain Integration Manager Key Deliverables Leading the virtual analyses team to meet performance targets at component, sub assembly and vehicle level Leading and support teams by providing technical support for durability, linear and non-linear analysis. Interacting with various design and testing teams for understating requirements and providing proactive feedback which supports CAE driven vehicle development. Developing performance attribute targets from components to full vehicle level and participate in benchmarking activities supporting target setting. Ensuring the CAE tasks are conducted as per approved product development time line and support in meeting performance target (weight and other attributes) by best use of optimization technique. Understanding customers basic requirements and expectations for new product design and perform complex design analysis using CAE. Participating in design review meetings to provide appropriate recommendations and timely design guidance to support the team in meeting customer requirements. Providing engineering solutions for complex problems by developing quick alternative improved designs. Maintaining records of all activities and results in CAE project database. Ensuring that all work carried out is in compliance with company design, safety, quality, environmental compliance and procedural standards Formulating the loading conditions and validation acceptance criteria for sub-systems, systems and vehicle levels Continuously improving the quality of virtual validation in comparison and physical validation Creating a roadmap for the complete vehicle virtual validation Defining the Design Validation Plan (DVP) and acceptance criteria for the systems at component and vehicle level Coordinating with internal stake holders for building the prototypes, testing, homologation and other related activities Working continuously on value engineering proposals for the systems and their components to achieve the cost target Performing activities to ensure the design quality and BOM quality and aid in the product life cycle management for the designated systems Directing the team to design and integrate Engine cooling system including selection of cooling system and integration on the vehicles for Petrol, Diesel, CNG and LPG vehicles and to ensure the cooling performance of overall powertrain as per the acceptance criteria Guiding the team to carry out activities related to Engine mounting system including designing the engine suspension system to meet the vehicle level noise and vibration level requirements along with life target for Petrol, Diesel, CNG and LPG powered vehicles. Executing activities to carry out 6 DOF analysis independently Carrying out the Exhaust integration on the vehicle while considering the NVH, performance, cost and life requirements Ability to establish a systematic course of action for self or others to ensure successful project completion including determining priorities and allocating time and resources effectively. Ability to achieve results against an internal and external standard of excellence, showing a passion for improving the delivery of services with a commitment to continuous improvement. Ability to supervise a complex task by breaking it down into manageable parts in a systematic way, work logically to resolve problems and further identifies causes and anticipate implications Anticipating potential obstacles and develops contingency plans to overcome them. Ability to improve the immediate performance of others and facilitate their skill development by providing behaviorally specific performance feedback Generates novel and valuable ideas and uses these ideas to develop new or improved processes, methods, systems, products or services. Possess strong technical knowledge to provide sound and insightful recommendations in area of expertise Focuses ones efforts on discovering and meeting internal and external customers’ needs in a manner that provides satisfaction for the customer within the resources available Accuracy in Virtual analysis of full vehicle component. Developing designs to meet customer requirements and market trends Comprehensive and robust design solution for complex problems Qualification and Work Experience M.E /M- Tech or B.E /B –Tech (Automobile/ Mechanical) Desired Qualification Work Experience of 10 years of experience in the industry Preferred Industry Experience Automobile and Auto Ancillary companies. Experience in automotive modelling and CAE for Automotive. Preferred Technical Skills and Certification Hands on experience on Hyper Mesh, OptiStruct, MSC Nastran, Fatigue Analysis. CAD Software knowledge, FEMFAT Software, OptiStruct Optimization, Manufacturing processes. Knowledge of Automobile Mechanics, Material Science, FEA, Engineering Mechanics.

Hi, Please find below given JD Experience 12+ Years BE + MBA Location Pune Products - CNG_Parts/Equipment/Component 1. Business Strategy and Business Development Develop & implement short-term (3 years) and long-terms (5 years) business strategy for. Monitor competitor activities and device strategies to strengthen ADVIK market share /leader position, Formulate action plans for new product identification & development and market penetration within India & overseas Get product costing right. Cost estimation, planning and finalization of new business as per financial model to maintain/improve EBITDA Work closely R&D, Sourcing, Operations and Strategy to finalize build or buy options Work closely with all external stakeholders / partners for developing entire ecosystem for the offerings of Advik 2. Customer Acquisition & Penetration Develop customer base for the products Increase wallet share with existing customers and develop new customer for existing products & new products. 3. Resource Management Capacity planning: ensure optimal utilization of resources to meet production targets. Team building: Recruit, train, and develop a skilled workforce Compulsory want the exposure into product CNG Fuel System Equipment Component Sales 1. CNG Product / System knowledge 2. Global ecosystem knowledge 3. Product costing 4. Customer connect / Relationship Management Negotiation skill

Car Evaluator Eligibility: - Minimum 4 years of experience as a Technician in OEM - Must have a driving license and know how to drive both 2-wheelers and 4-wheelers Job Description: - Evaluate and identify issues in vehicles - Visit customers' locations to inspect cars - Click and upload images of car parts on the app - Ensure proper submission of reports on the app - Estimate repair costs - Strong knowledge of vehicle components (chassis, panels, paint, engine, clutch, gearbox, brakes, suspension, etc.) - Ability to read and understand basic English Contact Information: - Interested candidates can DM (direct message) or share their resume - WhatsApp also available at 9315987720 Conduct vehicle evaluations and tests Diagnose and repair issues with clutches, brakes, suspension, shock absorbers, etc. Maintain accurate records of work performed

Role & responsibilities Freshers with relevant academic background are also encouraged to apply. Manage CNG & LNG Station, Key Responsibilities: • Responsible for the installation of fuel systems while maintaining high safety standards and ensuring zero leaks. • Actively participate in discussions with the Program Coordinator for weekly work planning in alignment with the overall project schedule. • Provide daily progress updates to the Program Coordinator. • Measure completed work and verify contractor bills for accuracy. • Coordinate with QA/QC teams for material inspections. • Perform additional duties assigned by the reporting manager to support program activities. • Assist in the preparation of documentation required for weekly and monthly reports. • Inspect workmanship and material quality to ensure compliance with approved standards and specifications. • Update material stock and prepare weekly material requirements. • Serve as the custodian of tools used in project work and oversee their proper handling and maintenance. • Study project drawings and prepare/interpret Material Take-Off (MTO). • Prepare as-built drawings and joint measurement reports. • Knowledge of MS Project is an added advantage. • Ensure safety management for self and the team while upholding integrity and ethical Essential Knowledge & Skills: • 2 to 3 years of experience in project work, preferably in oil & gas, industrial, or chemical industries. • Hands-on experience in Mechanical, Electrical, and Plumbing (MEP) systems, including installation, commissioning, and troubleshooting of related equipment. • Familiarity with industry standards and safety practices in MEP work. Desirable Skills: • Candidates from the respective state location are preferred. • Proficiency in local languages and English is essential, with knowledge of Hindi being an added advantage. • Strong problem-solving skills and adaptability to dynamic project requirements. • Ability to collaborate effectively in diverse and cross-functional teams. • Flexibility to work in challenging environments and handle multiple tasks efficiently

Role & responsibilities Manage CNG & LNG Station, Key Responsibilities: • Responsible for the installation of fuel systems while maintaining high safety standards and ensuring zero leaks. • Actively participate in discussions with the Program Coordinator for weekly work planning in alignment with the overall project schedule. • Provide daily progress updates to the Program Coordinator. • Measure completed work and verify contractor bills for accuracy. • Coordinate with QA/QC teams for material inspections. • Perform additional duties assigned by the reporting manager to support program activities. • Assist in the preparation of documentation required for weekly and monthly reports. • Inspect workmanship and material quality to ensure compliance with approved standards and specifications. • Update material stock and prepare weekly material requirements. • Serve as the custodian of tools used in project work and oversee their proper handling and maintenance. • Study project drawings and prepare/interpret Material Take-Off (MTO). • Prepare as-built drawings and joint measurement reports. • Knowledge of MS Project is an added advantage. • Ensure safety management for self and the team while upholding integrity and ethical Essential Knowledge & Skills: • 23 years of experience in project work, preferably in oil & gas, industrial, or chemical industries. • Hands-on experience in Mechanical, Electrical, and Plumbing (MEP) systems, including installation, commissioning, and troubleshooting of related equipment. • Familiarity with industry standards and safety practices in MEP work. Desirable Skills: • Candidates from the respective state location are preferred. • Proficiency in local languages and English is essential, with knowledge of Hindi being an added advantage. • Strong problem-solving skills and adaptability to dynamic project requirements. • Ability to collaborate effectively in diverse and cross-functional teams. • Flexibility to work in challenging environments and handle multiple tasks efficiently

Urgent Hiring for Car Evaluator postion. And Car Technician. Interested candidate Send me updated CV on WhatsApp 9315987720 Conduct clutch, gear box, suspension, brakes inspections Perform repairs on vehicles with diesel engines Evaluate vehicle condition through ECR testing Manage workshop operations and staff Conduct vehicle evaluations & PDI inspections Perform car servicing, gear box repairs & clutch replacements Test engines, suspension, brakes & steering systems

Responsibilities: Conduct GPS tracking & sensor calibration Manage fuel systems & tanks Perform electrical maintenance & electronics work Handle cameras & perform calibrations Execute camera handling tasks Provident fund

Dear Candidate, Greetings from RightHire!! We've been retained by a leading multi-billion dollar company into oil & gas. And currently, were scouting for General Manager - Aviation Fuel (Unit Lead) to be based out at Hyderabad for its Aviation Fuel Division. Please find below a brief JDs & revert me back with your updated CV should the role suits & excites you to join in such a prestigious company J ob Accountabilities: Operations Management to ensure safe and reliable operations across all units of the Business Responsible for implementation of policies, strategies and processes for efficiency in operations Responsible for effective management of all site risks including application of tools to recognize and minimize risk. Engagement with key stakeholders (site management, suppliers and service providers, customers, government and other authorities, regulatory bodies, contract staff, etc.) for delivery of safe, reliable, and compliant operations and high-quality fuels Responsible for periodic release of Operations & Technical Bulletins Responsible for implementation of technology solutions throughout the operating units for sustaining value proposition in most cost-effective manner Budget Control and Cost optimization to deliver maximum throughput within the budget Responsible for operational budget control and optimal planning of resources Responsible for driving down costs in operations for competitive edge Implement KPI for monitoring and control of operational expenses Period evaluation of actual v/s budgeted expense, analyze major deviation, propose control measures. Commissioning and stabilization of operations for all new facilities Execution of project plan for new / augmentation of facilities Responsible for pre-commissioning audits and commissioning of all new facilities as per laid down procedures Responsible for obtaining necessary approvals and consent to operate as per plan Oversee and ensure smooth commencement of operations at newly commissioned site Drive operational excellence across all units of the Business Responsible for improving operational management systems, processes and best practices across all units of the Business Responsible for Statutory and Mandatory audit reviews, recommendation and implementation of corrective actions Oversight for recruitment, training and development of resources and dissemination of learning Thanks & regards, Bhumi Founder RightHire 9004950183

Mega Walk-in Drive on 5th July 2025 (Saturday) @ Chennai Quest Global Engineering Services Pvt Ltd, 11th floor, IndiQube Alpine, behind Ekkattuthangal Metro Station, Labour Colony, SIDCO Industrial Estate, Guindy, Chennai, Tamil Nadu 600032 Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 5th July 2025 (Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

About The Role At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Basic Qualifications (Required Skills/Experience): Bachelor's or Master's Degree or higher is required as BASIC QUALIFICATION. Experience in EPR and NMR spectroscopy. Experience in Analytical Chemistry Laboratory included failure analysis, material characterization, and instrumentation development. Experience in Liquid chromatography, gas chromatography and thermal Analysis Techniques (DSC, TMA, TGA). Thorough knowledge of ASTM Standards ASTM D1655, D7566 and D4054. In Depth knowledge of Aircraft Fuel Systems and Fuel Analysis. Basic Knowledge Aircraft Propulsion Systems. Must be willing to stretch and support to meet the needs of the customer. Must have strong written and verbal communications and presentation skills Preferred Qualifications (Desired Skills/Experience): Experience working with Fuel System Requirements - 14 CFR Part 25 regulations. Experience in Fuel Requirements for Flight Operations (14 CFR Part 91 & Part 121) Basic Understanding of AC 150/5230-4C, Aircraft Fuel Storage, Handling, Training. Experience with fuel properties calculations. Basic understanding of root cause and corrective action process Experience working transport category airplane Fuels systems. Knowledge of Data analytics and awareness of programming languages like Python etc. Typical Education & Experience Education/experience typically acquired through advanced education Masters and preferably PHD and typically 5+ years of related work experience or an equivalent combination of education and experience. Relocation This position offers relocation within INDIA. This position offers relocation based on candidate eligibility. Export Control Requirement This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Mega Walk-in Drive on 21st June 2025 (Saturday) @ Chennai Interview Venue: Quest Global Engineering Services Pvt Ltd, 6th floor, IndiQube Alpine, behind Ekkattuthangal Metro Station, Labour Colony, SIDCO Industrial Estate, Guindy, Chennai, Tamil Nadu 600032 Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 21st & 22nd June 2025 (Saturday & Sunday) @ Hyderabad Interview Venue: QuEST Global Engineering Services Private limitedQGESPL Tower 8 , Fourth Floor, GAR Corp, IT-ITES SEZ Survey No. 89, Kokapet Village Gandipet Mandal Rangareddy District Telangana-500075 Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 21st June 2025(Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Piping layouts e.g. Fuel system, Lube oil system, steam system Diesel engine based power plants Experience in 3D modelling software( E3D / PDMS ) Must be well familiar with International codes and standards like ASME, DIN EN, and ISO Required Candidate profile Preparations of overall 3D & 2D layouts in E3D & work independently with minimum supervision Pipe racks, secondary steel, Platforms concepts etc. taking into consideration of piping flexibility

Mega Walk-in Drive on 14th June 2025(Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

AM /ASM - after market /after sales, NAGPUR - auto parts / filers/ fuel systems Aftermarket business in the state. key Customer Account, coordination, sales target, Business Plan. Introduction of new parts, Manage Quality Claims, aftermarket sales

Dear Candidate, We have an urgent requirement of "Manager - CPS (Propulsion)". Candidate should be qualified in B.Tech/BE or M.Tech. Work experience with a sound understanding of Mechanical Engineering principles (showing an attention to detail, and being data driven).Candidate should be known. 1.Engineering change implementation 2. Leading / supporting root cause analysis in quality / field failures. 3. New product and process improvements. 4. Product management in PLM and SAP 5. To assist project management. Role & responsibilities 1.To deliver systems/components design / development from concept to delivery from specification, through analysis, testing and development, to engineering sign-off. 2. Create system and component specifications and design (cascaded from product engineering / programme targets) using the relevant analysis tools to support data driven design decisions. 3. Experienced on engine components design like crankshaft; Piston, ring pack, pin, clips, connecting rod, small and big end bearings, crank, main bearings, thrust washers, crankshaft damper; bushings, chains, belts, tensioners, guides for off Highway Engine using UG NX. 4. Experience on Team Centre is preferred 5. Prepare and maintain engineering release and change documents 6. Knows, follows and uses the design standard documents, DFMEA, PPAP, DVP, Control Plan & GD&T 7. Co-ordinate DVP tests/analyse. 8. Resolve engineering issues using recognised methodologies. 9. Coordination with other functional areas, such as programme teams, purchasing, quality, plant operation team/ other development teams. 10. Work in a simultaneous engineering environment to support the development plan, ensuring design for manufacture and assembly. 11. Good communication skill having ability to provide clear communication and support to all customers, engineering teams and suppliers. 12. Work with suppliers to deliver prototypes and PPAP parts to schedule, meeting quality and performance requirements 13. Communicate lessons learned, propose design guide/process updates. 14. Manage suppliers via APQP process 15. Worked in the area of Diesel Engine Design preferably Off highway machines. Required 1. Have a sound grasp of the engine product development cycle and expertise in engine system and component specification, design, development and sign-off (using relevant tools) 2. Ideally, have experience with an engine manufacturer or Tier 1 supplier in current product Engineering. 3. Demonstrate project and supplier management skills and good commercial awareness 4. Show flexibility - the role requires travel to customer and supplier sites as and when required. Interested candidate can share their Cv at swati.shikha@mounttalent.com or can reach me 9560495550. -