167 Fluids Jobs - Page 5

Medical Services/Hospital Full-Time Job ID: DGC00598 Chennai, Tamil Nadu 1-5 Yrs ₹1.25 - ₹4.5 Yearly Job description Job Description: Staff Nurse at Portea Medical, Bangalore Portea Medical is a leading healthcare provider specializing in home healthcare services. We are currently seeking a dedicated and experienced Staff Nurse to join our dynamic team and provide high-quality nursing care to patients in a home-based setting. As a Staff Nurse, you will play a pivotal role in ensuring patients' well-being and recovery, assisting with their daily medical needs, and delivering compassionate, patient-centered care in collaboration with physicians and other healthcare professionals. Key Responsibilities: Tracheotomy Care: Provide expert care for patients with tracheostomy tubes, including cleaning, suctioning, and monitoring for complications. Ensure proper airway management and assist with tracheotomy tube replacement as per clinical guidelines. Colostomy Care: Manage colostomy patients by teaching proper stoma care, monitoring for signs of infection, and ensuring the comfort and safety of patients. Provide emotional and psychological support as needed. Central Line Care: Perform sterile dressing changes, monitor for signs of infection, and ensure the maintenance of central venous access devices (CVCs). Assist in the safe administration of intravenous medications and fluids. Feeding and Nutrition Support: Administer enteral feeding (via nasogastric or gastrostomy tubes), monitor patient tolerance, and report any concerns related to feeding tubes, aspiration, or gastrointestinal issues. CPAP & BIPAP Monitoring: Set up and manage continuous positive airway pressure (CPAP) and bilevel positive airway pressure (BiPAP) devices for patients with respiratory issues. Monitor patient adherence and comfort, and adjust settings as prescribed by the healthcare provider. Vital Monitoring: Regularly assess vital signs, including heart rate, blood pressure, oxygen saturation, temperature, and respiratory rate. Report any abnormal findings to the supervising physician or medical team promptly. Patient Education: Educate patients and their families on managing medical conditions, proper use of equipment,and ensuring comfort and safety at home. Provide emotional support and ensure patient and family understanding of care plans. Emergency Response: Be prepared to respond to any changes in the patients condition, including administering emergency procedures as per protocol. Documentation & Reporting: Maintain accurate and up-to-date patient records, including nursing notes, care plans, and patient progress reports. Ensure timely reporting of any changes in patient health to the medical team.

Requisition #: 16462 Our Mission: Powering Innovation That Drives Human Advancement When visionary companies need to know how their world-changing ideas will perform, they close the gap between design and reality with Ansys simulation. For more than 50 years, Ansys software has enabled innovators across industries to push boundaries by using the predictive power of simulation. From sustainable transportation to advanced semiconductors, from satellite systems to life-saving medical devices, the next great leaps in human advancement will be powered by Ansys. Innovate With Ansys, Power Your Career. Summary / Role Purpose Join the Ansys Customer Excellence team to assist our customers on all the aspects of their real-world engineering simulation projects and integration of Ansys software in their design workflows and grow Ansys’ business. You will use advanced-level engineering knowledge along with Ansys AI-based platforms to make our customers successful. You will be a part of our positive, dynamic team of enthusiastic and passionate engineers striving to deliver the highest quality solutions to our customers, advancing your pervasive simulation knowledge, experience, and your impact on the success of our customers and Ansys. Key Duties And Responsibilities Deploy and exploit all available resources, including Ansys AI-based platforms to complement your engineering expertise and knowledge of simulation to assist customers in solving their engineering problems and enabling their usage of Ansys Fluids Products. Ensure high Customer Satisfaction and Customer Success that enable customers' usage/deployment/adoption of Ansys software Develop and strengthen long-term relationships with customers. Share your extensive knowledge and experience by creating & updating content to ensure the most relevant help and information is available for customers and internal colleagues. Submit suggestions for product improvement, when needed. File defect reports and verify fixes adhering to defect reporting processes. Participate in application field testing of new releases to ensure that new features and workflows will address customer requirements. Be enthusiastic about learning and promoting how AI-based technologies can assist engineers' own abilities to help Ansys customers. Learn and gain expertise in new technical areas as and when required for the team & personal development Participate in other strategic team and company initiatives, as needed Minimum Education/Certification Requirements And Experience Required education and degree type: B.Tech, M.Tech or PhD in Mechanical or Chemical Engineering or related field Required minimum 2 years of professional experience in an engineering software environment: Demonstrated use of Ansys Fluids software or knowledge of other commercial CAE software packages Expert-level knowledge of Fluid dynamics, Heat transfer, Reacting Flow, Numerical Methods and Thermodynamics Demonstrated problem-solving skills and ability to implement numerical models to obtain practical engineering solutions to difficult problems Logical problem-solving, strong interpersonal and communication skills, fluent in writing and speaking English Engaging personality, engineering curiosity and willingness for continuous learning Strong organizational and time management skills, possesses a sense of urgency Ability to work independently, as well as with others in a diverse team environment Projects a professional image and demonstrates business acumen, driven to succeed Preferred Qualifications And Skills 2-3 years of experience in customer-facing roles associated with using engineering simulation software, where the ability to identify customer requirements, effectively communicate solutions, and deliver results have been demonstrated Experience in using Ansys tools, like Ansys Workbench, Ansys Fluent, Ansys CFX, and Ansys Space claim is preferred. Experience on multiphase and/or reacting flow physics will be an added advantage Ability to travel domestically up to 10% of the time At Ansys, we know that changing the world takes vision, skill, and each other. We fuel new ideas, build relationships, and help each other realize our greatest potential. We are ONE Ansys. We operate on three key components: our commitments to stakeholders, our values that guide how we work together, and our actions to deliver results. As ONE Ansys, we are powering innovation that drives human advancement Our Commitments Amaze with innovative products and solutions Make our customers incredibly successful Act with integrity Ensure employees thrive and shareholders prosper Our Values Adaptability: Be open, welcome what’s next Courage: Be courageous, move forward passionately Generosity: Be generous, share, listen, serve Authenticity: Be you, make us stronger Our Actions We commit to audacious goals We work seamlessly as a team We demonstrate mastery We deliver outstanding results VALUES IN ACTION Ansys is committed to powering the people who power human advancement. We believe in creating and nurturing a workplace that supports and welcomes people of all backgrounds; encouraging them to bring their talents and experience to a workplace where they are valued and can thrive. Our culture is grounded in our four core values of adaptability, courage, generosity, and authenticity. Through our behaviors and actions, these values foster higher team performance and greater innovation for our customers. We’re proud to offer programs, available to all employees, to further impact innovation and business outcomes, such as employee networks and learning communities that inform solutions for our globally minded customer base. Welcome What’s Next In Your Career At Ansys At Ansys, you will find yourself among the sharpest minds and most visionary leaders across the globe. Collectively, we strive to change the world with innovative technology and transformational solutions. With a prestigious reputation in working with well-known, world-class companies, standards at Ansys are high — met by those willing to rise to the occasion and meet those challenges head on. Our team is passionate about pushing the limits of world-class simulation technology, empowering our customers to turn their design concepts into successful, innovative products faster and at a lower cost. Ready to feel inspired? Check out some of our recent customer stories, here and here . At Ansys, it’s about the learning, the discovery, and the collaboration. It’s about the “what’s next” as much as the “mission accomplished.” And it’s about the melding of disciplined intellect with strategic direction and results that have, can, and do impact real people in real ways. All this is forged within a working environment built on respect, autonomy, and ethics. CREATING A PLACE WE’RE PROUD TO BE Ansys is an S&P 500 company and a member of the NASDAQ-100. We are proud to have been recognized for the following more recent awards, although our list goes on: Newsweek’s Most Loved Workplace globally and in the U.S., Gold Stevie Award Winner, America’s Most Responsible Companies, Fast Company World Changing Ideas, Great Place to Work Certified (China, Greece, France, India, Japan, Korea, Spain, Sweden, Taiwan, and U.K.). For more information, please visit us at www.ansys.com Ansys is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics. Ansys does not accept unsolicited referrals for vacancies, and any unsolicited referral will become the property of Ansys. Upon hire, no fee will be owed to the agency, person, or entity. Show more Show less

Patient Care: Deliver holistic nursing care to patients, including assistance with hygiene, nutrition, mobility, and medication. Monitor and record vital signs, symptoms, and patient responses to treatment. Administer medications, IV fluids, and injections as prescribed by physicians. Clinical Duties: Assist in diagnostic tests, sample collection, dressing changes, catheterization, and minor procedures. Prepare patients for surgeries, investigations, or transfers as needed. Observe patients for changes in condition and inform the concerned doctor/nursing incharge promptly. Documentation & Reporting: Maintain accurate patient records including nursing notes, medication charts, and incident reports. Update case sheets and handover reports during shift changes. Coordination & Communication: Coordinate with doctors, therapists, and other healthcare team members for comprehensive patient care. Educate patients and family members on disease management, discharge instructions, and medication use. Infection Control & Safety: Follow hospital infection prevention protocols, including hand hygiene, PPE use, and sterilization. Ensure proper waste segregation and disposal as per biomedical waste guidelines. Equipment & Inventory Management: Ensure proper usage and maintenance of nursing equipment (BP apparatus, thermometers, etc.). Monitor and request necessary supplies for the ward/unit. Job Type: Full-time Pay: ₹12,000.00 - ₹20,000.00 per month Benefits: Health insurance Schedule: Day shift Evening shift Morning shift Night shift Supplemental Pay: Yearly bonus Education: Bachelor's (Required) Experience: Nursing: 3 years (Required) Language: Marathi (Required) Work Location: In person

We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry. Job Duties Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment. Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse. Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools. Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports. Understands hazardous materials, job, wash up and discharge procedures. Verifies correct line up of valves on bulk systems and surface manifold equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. Skills are typically acquired through successful completion of high school or similar education and 0-6 months of experience as an Operator Asst-Cementing I. Licensure to drive commercial equipment may be required. May require I-Learn courses: Cementing II and Service Tools I. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. Qualifications Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation . Location Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India Job Details Requisition Number: 198035 Experience Level: Entry-Level Job Family: Operations Product Service Line: Cementing Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.

SKILL / KNOWLEDGE REQUIRED  In-depth knowledge of ball valve and butterfly valve design principles.  Understanding of torque characteristics, flow coefficients (Cv), and pressure drops.  Experience with valve actuation systems (manual, electric, pneumatic, hydraulic).  Selection of metals, elastomers, and coatings for various fluids (corrosive, abrasive, high-temp, etc.).  Knowledge of compatibility (chemical resistance, wear, fatigue) under different process conditions.  Capacity to conceive & implement innovative ideas to enhance valve performance, reliability, efficiency, & safety.  Proficient with design tools SolidWorks, AutoCAD, ERP/SAP packages, ASME/API/EN codes & standards.  Proficiency in project management methodologies to effectively lead design projects, allocate resources, set milestones, and manage timelines.  Strong written and verbal communication skills to convey complex technical concepts and design requirements to cross-functional teams, stakeholders, and customers.  Sound Knowledge of process industry, basic metallurgy & heat treatment, PTFE / O-rings, plating/coatings and valves are considered as an asset.  Agile way of working & methodical approach and an eye for detail engineering  Capable of working independently and willing to make decisions based on sound engineering practice/judgement ROLES & RESPONSIBILITIES:  Create comprehensive design documentation, including drawings, specifications, bills of materials (BOMs), and technical reports that facilitate smooth transition from design to manufacturing. (Ball valve & Butterfly Valves). Assist in performing design calculations related to pressure, flow, materials, and structural integrity of the valves.  Utilize engineering software and simulations to analyze and validate designs, ensuring they can withstand operational conditions and meet industry standards.  Creating detailed design specifications, conducting engineering analysis, and ensuring that designs meet performance, reliability, and safety requirements.  Work closely with cross-functional teams, including production, quality assurance, procurement, and marketing, to ensure that design projects are aligned with overall business goals & smoothly transition into production.  Oversee the creation of prototypes for new valve designs and coordinate testing to evaluate their performance under various conditions. Analyze test results and iteratively refine designs as needed.  Identify potential design risks and work to mitigate them through thorough analysis, testing, and collaboration with other teams.  Collaborate with procurement and suppliers to select appropriate materials and components for new designs, considering factors like quality, availability, and cost.  Continuously review and improve design & development processes to enhance efficiency, accuracy, Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Rotational shift Supplemental Pay: Commission pay Yearly bonus Work Location: In person

Job Summary : The OT Technician (Scrub Side) is responsible for preparing the operation theatre, arranging surgical instruments and supplies, assisting the surgical team during procedures by maintaining a sterile field, and ensuring adherence to infection control protocols. The technician plays a critical role in the smooth functioning of surgeries by supporting surgeons and nurses in pre-operative, intra-operative, and post-operative tasks. Key Responsibilities : Pre-Operative Duties : Prepare the OT and sterile field before surgery. Check and arrange surgical instruments and supplies according to the surgery schedule. Ensure sterilization of instruments and equipment prior to procedures. Assist in patient positioning and skin preparation. Verify surgical packs and tray setups are complete and sterile. Intra-Operative Duties : Scrub in and assist surgeons during the procedure by passing instruments and supplies. Maintain aseptic technique and ensure sterile field is not compromised. Anticipate the needs of the surgeon to ensure the procedure runs smoothly. Count instruments, sponges, and sharps before, during, and after surgery. Post-Operative Duties : Help in the safe transfer of the patient from the OT table to recovery. Assist in the disposal of used materials and restocking of supplies. Clean and sterilize instruments and prepare them for the next procedure. Document surgical records and instrument usage. Qualifications : Diploma or Certification in Operation Theatre Technology or equivalent. Previous experience as a scrub technician preferred (1–3 years). In-depth knowledge of surgical instruments and procedures. Understanding of infection control protocols and aseptic techniques. Skills and Competencies : Good manual dexterity and hand-eye coordination. Ability to work efficiently under pressure in a high-stakes environment. Attention to detail and excellent organizational skills. Team player with strong interpersonal communication. Ability to maintain confidentiality and professionalism. Work Conditions : Rotational shifts including weekends and holidays. Standing for long hours during surgeries. Exposure to bodily fluids and biohazards (PPE provided). Let me know if you'd like a version tailored for a specific type of hospital (e.g., orthopedic, cardiac, general surgery) Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Provident Fund Schedule: Rotational shift Supplemental Pay: Performance bonus Yearly bonus Ability to commute/relocate: New Delhi, Delhi: Reliably commute or planning to relocate before starting work (Preferred) Location: New Delhi, Delhi (Preferred) Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person Application Deadline: 04/06/2025

🚨 Postdoctoral Position Open | GOLD Labs – IISER Tirupati 🔬 Funding: ANRF-NPDF 📍 Location: Department of Earth and Climate Sciences, IISER Tirupati I am seeking a motivated Postdoctoral Fellow (PDF) to join our Economic Geology Research Group – GOLD (Genesis of Ore Fluids and Lode Development) at IISER Tirupati , under the support of the ANRF-NPDF scheme. 🧪 Project Theme: Genesis, Evolution, and Characterization of Hydrothermal Fluids Associated with Gold and Copper Mineralization This research aims to unravel the physico-chemical nature, sources, and evolution of hydrothermal fluids associated with auriferous and cupriferous mineral systems, using integrated fluid inclusion, stable isotope, mineral chemistry, and petrological approaches. 🔍 Ideal Candidate Profile: • Ph.D. in Earth Sciences / Geology with specialization in Economic Geology / Geochemistry / Petrology • Strong background in fluid inclusion studies, ore petrography, or stable isotopes. • Familiarity with mineral deposits of Precambrian terrains is an advantage. • Publication record relevant to ore deposit studies. 📝 How to Apply: Interested candidates should reach out with a CV, cover letter , and a brief research statement to chandan@labs.iisertirupati.ac.in. Application through the ANRF-NPDF portal is required as per eligibility. 🔗 Apply here: https://lnkd.in/gZfU6tkK Feel free to connect or tag anyone who may be interested or share within your networks. hashtag #PostdocOpportunity hashtag #GeologyJobs hashtag #EconomicGeology hashtag #OreDeposits hashtag #FluidInclusions hashtag #Geochemistry hashtag #GoldExploration hashtag #CopperDeposits hashtag #IISERTirupati hashtag #ANRF hashtag #NPDF hashtag #Hiring Show more Show less

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Job Description Overview As a leading global aerospace company, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. As a top U.S. exporter, the company leverages the talents of a global supplier base to advance economic opportunity, sustainability and community impact. Boeing’s team is committed to innovating for the future, leading with sustainability, and cultivating a culture based on the company’s core values of safety, quality and integrity. Technology for today and tomorrow The Boeing India Engineering & Technology Center (BIETC) is a 5500+ engineering workforce that contributes to global aerospace growth. Our engineers deliver cutting-edge R&D, innovation, and high-quality engineering work in global markets, and leverage new-age technologies such as AI/ML, IIoT, Cloud, Model-Based Engineering, and Additive Manufacturing, shaping the future of aerospace. People-driven culture At Boeing, we believe creativity and innovation thrives when every employee is trusted, empowered, and has the flexibility to choose, grow, learn, and explore. We offer variable arrangements depending upon business and customer needs, and professional pursuits that offer greater flexibility in the way our people work. We also believe that collaboration, frequent team engagements, and face-to-face meetings bring together different perspectives and thoughts – enabling every voice to be heard and every perspective to be respected. No matter where or how our teammates work, we are committed to positively shaping people’s careers and being thoughtful about employee wellbeing. With us, you can create and contribute to what matters most in your career, community, country, and world. Join us in powering the progress of global aerospace. Boeing India Engineering and Technology Centre is currently looking for Experienced Manufacturing Engineer to join their Manufacturing Engineering team in Chennai, India, you will be part of a global team working on providing ME solutions to a wide range of Boeing products and services across the world. These positions will focus on supporting the Boeing Commercial Airplanes (BCA) business organization. A successful candidate will Lead the preparation of build plan, create assembly work instructions and drive process standardization for different Airplane commodities, Structures, Systems and Interiors as these positions will focus on working directly with the Manufacturing Engineering Manager to provide Manufacturing Engineering solutions to a wide range of Boeing products and services across the world. Position Responsibilities: Author and Approve build plan/work instructions for installing components, systems, interiors and other structural assemblies for Aircraft Structural assemblies, Systems and Payloads. Create/Modify/Approve Installation plans, fabrication plans, and installation plan audits, CAPP/MES and Author work instructions Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build. Experience and knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, instrumentation, data acquisition and control systems) Resolves technical problems of significant impact to performance, cost or schedule. Mentor and develop the team on emergent skill requirements. Mentor the team on relevant industry standards and best practices. Provides guidance to others through structured mentoring. Support team to develop and implement manufacturing build plan/fabrication plan for Aircraft modules, components and assemblies and oversees plan optimization Guide manufacturing engineers to develop work instructions for installing components, systems, interiors and other structural assemblies. Support Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies. Support technical reviews addressing non-conformances and perform Root Cause Corrective Action (RCCA) investigations related to a manufacturing process. To work collaboratively with multi-functional team. Must be willing to work flexible hours to collaborate with Boeing personnel around the world. Develop and maintain relationships/partnerships with customers, stakeholders, peers, and partners to deploy collaborative plans and execute on projects. Awareness of AS9100 D quality management system and Ensure compliance with company quality management system requirements. Participate in the implementation of Lean principles and technologies. Good analytical approach for problem solving, driving the innovations with speed and agility. Employer will not sponsor applicants for employment visa status Basic Qualifications (Required Skills/Experience): A Bachelor’s engineering degree or higher is required as a BASIC QUALIFICATION. 8+ years of related work experience in the aerospace industry. 4+ years of experience related to manufacturing of aircraft Interiors/Systems/ Structures/Payloads. 2+ years of experience in leading a team of manufacturing engineers. Experience with Aerospace Manufacturing, Fabrication, Assembly Processes and Technologies. Experience with creation of manufacturing planning and authoring assembly work instructions. General Drawing Interpretation, Knowledge of Aerospace Materials and Processes. Knowledge of manufacturing execution systems like CAPP/MES, IPDM. Experience/Knowledge of CATIA/NX Modelling software’s and GD&T. Preferred Qualifications (Desired Skills/Experience): Bachelor's degree in Engineering (Aeronautical/Production/Manufacturing, etc.). Typical Education & Experience: Degree and typical experience in engineering classification: Bachelor's degree with 8+ Yrs or Master’s with 7+ yrs of experience in Mechanical/Aerospace Engineering, Production Engineering. Relocation: This position offers relocation. Applications for this position will be accepted until Jun. 07, 2025 Export Control Requirements: This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift Not a Shift Worker (India) Equal Opportunity Employer: We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law. We have teams in more than 65 countries, and each person plays a role in helping us become one of the world’s most innovative, diverse and inclusive companies. We are proud members of the Valuable 500 and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews. Show more Show less

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Job Description Overview As a leading global aerospace company, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. As a top U.S. exporter, the company leverages the talents of a global supplier base to advance economic opportunity, sustainability and community impact. Boeing’s team is committed to innovating for the future, leading with sustainability, and cultivating a culture based on the company’s core values of safety, quality and integrity. Technology for today and tomorrow The Boeing India Engineering & Technology Center (BIETC) is a 5500+ engineering workforce that contributes to global aerospace growth. Our engineers deliver cutting-edge R&D, innovation, and high-quality engineering work in global markets, and leverage new-age technologies such as AI/ML, IIoT, Cloud, Model-Based Engineering, and Additive Manufacturing, shaping the future of aerospace. People-driven culture At Boeing, we believe creativity and innovation thrives when every employee is trusted, empowered, and has the flexibility to choose, grow, learn, and explore. We offer variable arrangements depending upon business and customer needs, and professional pursuits that offer greater flexibility in the way our people work. We also believe that collaboration, frequent team engagements, and face-to-face meetings bring together different perspectives and thoughts – enabling every voice to be heard and every perspective to be respected. No matter where or how our teammates work, we are committed to positively shaping people’s careers and being thoughtful about employee wellbeing. With us, you can create and contribute to what matters most in your career, community, country, and world. Join us in powering the progress of global aerospace. Boeing India Engineering and Technology Centre is currently looking for Lead Manufacturing Engineer to join their Manufacturing Engineering team in Chennai, India, you will be part of a global team working on providing ME solutions to a wide range of Boeing products and services across the world. These positions will focus on supporting the Boeing Commercial Airplanes (BCA) business organization. A successful candidate will Lead the preparation of build plan, create assembly work instructions and drive process standardization for different Airplane commodities, Structures, Systems and Interiors as these positions will focus on working directly with the Manufacturing Engineering Manager to provide Manufacturing Engineering solutions to a wide range of Boeing products and services across the world. Position Responsibilities: Lead team to develop and implement manufacturing build plan/fabrication plan for Aircraft modules, components and assemblies and oversees plan optimization Guide manufacturing engineers to develop work instructions for installing components, systems, interiors and other structural assemblies. Drive Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies. Author and Approve build plan/work instructions for installing components, systems, interiors and other structural assemblies for Aircraft Structural assemblies, Systems and Payloads. Create/Modify/Approve Installation plans, fabrication plans, and installation plan audits, CAPP/MES and Author work instructions Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build. Experience and knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, instrumentation, data acquisition and control systems) Resolves technical problems of significant impact to performance, cost or schedule. Mentor and develop the team on emergent skill requirements. Mentor the team on relevant industry standards and best practices. Provides guidance to others through structured mentoring. Coordinate for the training and capability development, develop technical capability among peers on DFM and producibility studies Support technical reviews addressing non-conformances and perform Root Cause Corrective Action (RCCA) investigations related to a manufacturing process. To work collaboratively with multi-functional team. Must be willing to work flexible hours to collaborate with Boeing personnel around the world. Develop and maintain relationships / partnerships with customers, stakeholders, peers, and partners to deploy collaborative plans and execute on projects. Awareness of AS9100 D quality management system and Ensure compliance with company quality management system requirements. Participate in the implementation of Lean principles and technologies. Good analytical approach for problem solving, driving the innovations with speed and agility. Employer will not sponsor applicants for employment visa status Basic Qualifications (Required Skills/Experience): A Bachelor’s engineering degree or higher is required as a BASIC QUALIFICATION. 10+ years of related work experience in the aerospace industry. 6+ years of experience related to manufacturing of aircraft Interiors/Systems/ Structures/Payloads. 4+ years of experience in leading a team of manufacturing engineers. Experience with Aerospace Manufacturing, Fabrication, Assembly Processes and Technologies. Experience with creation of manufacturing planning and authoring assembly work instructions. General Drawing Interpretation, Knowledge of Aerospace Materials and Processes. Knowledge of manufacturing execution systems like CAPP/MES, IPDM. Experience/Knowledge of CATIA/NX Modelling software’s and GD&T. Preferred Qualifications (Desired Skills/Experience): Bachelor's degree in Engineering (Aeronautical/Production/Manufacturing, etc.). Typical Education & Experience: Degree and typical experience in engineering classification: Bachelor's degree with 12+ Yrs or Master’s with 11+ yrs of experience in Mechanical/Aerospace Engineering or Production Engineering. Relocation: This position offers relocation. Applications for this position will be accepted until Jun. 07, 2025 Export Control Requirements: This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift Not a Shift Worker (India) Equal Opportunity Employer: We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law. We have teams in more than 65 countries, and each person plays a role in helping us become one of the world’s most innovative, diverse and inclusive companies. We are proud members of the Valuable 500 and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews. Show more Show less

Job description Minimum one year experience in Nursing Assessing, observing, and speaking to patients Job Types: Full-time, Permanent Pay: ₹15,000 - 25,0000per month Benefits: Flexible schedule Health insurance Provident Fund Schedule: Rotational shift Supplemental Pay: Yearly bonus Experience: Nursing: 1 year (Preferred) Recording details and symptoms of patient medical history and current health Preparing patients for exams and treatment Administering medications and treatments, then monitoring patients for side effects and reactions Creating, implementing, and evaluating patient care plans with the medical team Performing wound care, such as cleaning and bandaging them Assisting in medical procedures as needed Operating and monitoring medical equipment Drawing blood, urine samples, and other body fluids for lab work Educating patients and family members on treatment and care plans, as well as answering their questions Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Flexible schedule Health insurance Provident Fund Schedule: Rotational shift Supplemental Pay: Yearly bonus Experience: Nursing: 1 year (Preferred)

Job Summary: The Scrub Nurse is a vital member of the surgical team, responsible for maintaining a sterile field and assisting the surgeon during procedures. The role involves preparation of the operating room, instruments, and supplies, as well as direct support to surgeons throughout the operation. Key Responsibilities: Prepare the operating room by setting up surgical instruments, sterile drapes, and equipment. Maintain a sterile environment before, during, and after surgical procedures. Assist the surgeon by passing instruments and other sterile supplies during operations. Count sponges, needles, and instruments before and after procedures to ensure patient safety. Monitor the surgical field and anticipate the needs of the surgical team. Collaborate with circulating nurses and other OR staff to ensure smooth workflow. Handle surgical specimens with proper labeling and care. Follow infection control protocols and hospital policies at all times. Assist in preparing patients for surgery as needed. Participate in post-operative clean-up and re-stocking of supplies. Qualifications: Registered Nurse (RN) license (active and in good standing) Certification in Perioperative Nursing (CNOR) preferred At least 1 year of experience in a surgical or operating room setting Current Basic Life Support (BLS) certification; Advanced Cardiac Life Support (ACLS) preferred Skills and Attributes: Strong knowledge of aseptic and sterile techniques Excellent communication and teamwork skills Ability to remain calm and focused in high-pressure situations Strong organizational and time management abilities Attention to detail and a high level of accuracy Working Conditions: Work is primarily performed in an operating room environment Requires standing for long periods and handling instruments May involve exposure to blood, bodily fluids, and other potentially infectious materials Must be available for shift work, including nights, weekends, and on-call duties Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Schedule: Day shift Evening shift Morning shift Night shift Rotational shift Work Location: In person

Lab Technician Responsibilities: Collecting, receiving, labeling, and/or analyzing samples or substances using the correct testing equipment, when necessary. Designing and executing laboratory testing in line with standard testing procedures, recording observations, and interpreting findings. Recording all experimental data and test results accurately and in the specified format (written and/or electronic.) Organizing and storing all chemical substances, fluids, and compressed gases according to safety instructions. Ensuring that safety guidelines are adhered to at all times within the laboratory. Maintaining daily logs and equipment record books. Cleaning, sterilizing, maintaining, and calibrating laboratory equipment. Ordering laboratory supplies, as needed. Providing technical support, when necessary. Keeping up to date with relevant scientific and technical developments. Lab Technician Requirements: Bachelor’s degree in biology, chemistry, or a related field. Valid laboratory technician license. Proven experience working as a lab technician. Working experience operating electrical and non-electrical laboratory equipment. Comfortable handling potentially dangerous substances (flammable liquids, biohazards, etc.) In depth knowledge of QHSE management systems, preventative measures, and laboratory best practices. Working knowledge of MS Office Suite and database systems. Ability to work autonomously and under pressure. Superb dexterity and hand-eye coordination. Excellent verbal and written communication skills. Keen attention to detail. Analytical skills. Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Health insurance Schedule: Day shift Supplemental Pay: Yearly bonus Work Location: In person

Lab Technician Responsibilities: Collecting, receiving, labeling, and/or analyzing samples or substances using the correct testing equipment, when necessary. Designing and executing laboratory testing in line with standard testing procedures, recording observations, and interpreting findings. Recording all experimental data and test results accurately and in the specified format (written and/or electronic.) Organizing and storing all chemical substances, fluids, and compressed gases according to safety instructions. Ensuring that safety guidelines are adhered to at all times within the laboratory. Maintaining daily logs and equipment record books. Cleaning, sterilizing, maintaining, and calibrating laboratory equipment. Ordering laboratory supplies, as needed. Providing technical support, when necessary. Keeping up to date with relevant scientific and technical developments. Lab Technician Requirements: Bachelor’s degree in biology, chemistry, or a related field. Valid laboratory technician license. Proven experience working as a lab technician. Working experience operating electrical and non-electrical laboratory equipment. Comfortable handling potentially dangerous substances (flammable liquids, biohazards, etc.) In depth knowledge of QHSE management systems, preventative measures, and laboratory best practices. Working knowledge of MS Office Suite and database systems. Ability to work autonomously and under pressure. Superb dexterity and hand-eye coordination. Excellent verbal and written communication skills. Keen attention to detail. Analytical skills. Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Health insurance Schedule: Day shift Supplemental Pay: Yearly bonus Work Location: In person

Share this job Business Information Hitachi Energy is currently looking for an R&D Engineer - Alternative Insulating Fluids for the Transformers Business to join Power Transformer Technology Centre, Vadodara, India. This team seeks a skilled and motivated individual. Transformers BU team leverages innovative and diverse technology to transform energy, delivering social, environmental, and economic value and enabling a sustainable energy future for current and future generations. The business’s comprehensive portfolio includes power transformers, traction transformers, insulation and components, digital sensors, and transformer services. The Company’s transformers have been deployed across power generation, transmission, and distribution to metals and mining, oil and gas, commercial and infrastructure projects, and mobility. As the grid becomes more complex, the transformers play an increasingly vital role in improving power quality and network management. The Company is proud to introduce its TXpert™ Ecosystem, the next level in transformer digitalization, further advancing its commitment to innovation and sustainability. The ideal candidate must enjoy working in a dynamic, fast-paced business environment. He or she must be flexible to accommodate business requirements and experience in working with diverse groups and cultures. The ability to multitask & delivers within timelines is essential. The candidate will have excellent communications skills. Mission Statement Contribute with own ideas to identify, propose and implement innovative technology development and solutions. Solve industrial problems independently. Demonstrate your technical expertise by undertaking a variety of engineering assignments within R&D projects. You will showcase your independent problem-solving skills and contribute to ongoing scientific discussions in your area. Your Responsibilities Identification and classification of potential alternative insulating fluids. Definition of requirements toward fluids regarding designing, manufacturability and in service operation of Transformers. Fluid’s qualification test methods definition, documentation, and execution. Close global cooperation with Material laboratories, Supply chain, OpeX and Engineering on definition and measurement of functional requirements. Collaboration with Transformer materials and components suppliers. Suitability verification of existing production equipment for new fluids. Close cooperation with factories during execution of pilot projects. Improvements in Technical, Production Standards and Material specifications. Exploring and improving risk assessment methodology for introduction of new fluids. Serve as a valuable R&D project member and, as a potential project or sub-project leader, ensure alignment with goals in time, cost, and quality. Coordinate activities with a strong grasp of R&D processes and tools. Actively participate in engineering networks to enrich your expertise and visibility within your targeted area. Recognize the importance of intellectual property to our business, engage in IP discussions, prepare project clearance reports, and identify risks in R&D projects. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background Master’s degree in Materials engineering Minimum 5 years of experience in research and development in a business environment dealing with liquid insulating materials. Solid understanding of the standard body of knowledge in the relevant technical field and solid technical proficiency. Experience in the Transformer industry will be beneficial Experience in material chemical analysis and OpeX perfections will be beneficial Project Management experience will be an advantage Willing to work in remote and diverse environments Willingness to travel to factories when needed Proficiency in both spoken & written English language is required. Apply now Location Maneja, Gujarat, India Job type Full time Experience Experienced Job function Engineering & Science Contract Regular Publication date 2025-05-07 Reference number R0090304 Show more Show less

Company Description Nirmal Energy Limited, based in Ahmedabad, India, specializes in energy-efficient industrial products and heating applications. The company offers a range of products including high-efficiency industrial burners from Baltur Italy, synthetic heat transfer fluid Maxothermie® by Capital Pure LLC US, and is an authorized distributor for Grundfos pumps. They provide complete heating solutions and services, including turnkey projects for process heating /utilities, synthetic thermic fluids, energy audits, and waste gas projects. Nirmal Energy Limited is known for its reliable and high-performance heating solutions tailored to various industrial applications. Role Description This is a full-time, on-site role located in Ahmedabad for an International Sales Manager - Heat Transfer Fluids and Heating Systems. The International Sales Manager will be responsible for identifying and developing new business opportunities in domestic and international markets, managing relationships with key clients, and driving sales of heating solutions and heat transfer fluids. Daily tasks include conducting market research, creating sales strategies, and collaborating with the technical team to provide customized solutions. The role also involves extensive travel to meet clients and attend industry events. Qualifications Proven experience in international sales, business development, and client relationship management Knowledge of heat transfer fluids, heating systems, and related technologies Strong communication, negotiation, and presentation skills Ability to conduct market research and develop effective sales strategies Willingness to travel extensively for client meetings and industry events Engineering degree or a related field is preferred Experience in the energy sector or industrial products is desirable Fluency in English and additional languages is an advantage Show more Show less

Job details Employment Type: Full-Time Location: Pune, Maharashtra, India Job Category: Engineering Job Number: WD30239004 Job Description What You Will Do: ADTi is seeking a hands-on Mechanical Engineer to join our Product Engineering team. Engineering teams are responsible for the design and development. Prepares and advises others in the preparation of design layouts, detailed drawings, and specifications. Plans and holds meetings with stakeholders. Prepare the BOM from drawings and able to use Excel/ERP systems How You Will Do It: Our Mechanical Engineers' responsibilities include but are not limited to develop water-based fire protection product or system concepts and detailed designs, as advised; prototype generation and testing to international standards; conduct detailed studies to support design decisions; maintain records of design process in accordance with sound design practice and ISO requirements by performing duties directly or through subordinates when so directed. Analyzes product and equipment specifications to support decisions on initial design direction. Stays on top of the company’s product offerings, within the area of involvement, to support decisions on initial design direction. Maintains a solid understanding of the company’s manufacturing operations to understand the strengths and weaknesses of design concepts from the point of view of manufacturability within the company. Conducts feasibility, cost, optimization, stress, fluids, and thermal analyses. Provides technical information concerning manufacturing and/or processing techniques, materials, properties, and process advantages and limitations which affect plant and product engineering planning. Keeps tabs on the newest technology developments to ensure the company sees available opportunities for technical improvements in products and services and/or cost reductions. Confers with research personnel and other technical functions as the need arises to clarify and resolve problems and develop designs. Maintains a solid understanding of general industry and specific agency approval requirements, to ensure compliance is maintained in designs. Prepares and advises others in the preparation of design layouts, detailed drawings, and specifications. Advises and coordinates prototype efforts. Compiles and analyzes operational, test, and research data to establish and/or evaluate performance standards and limits for new or existing products. Plans, develops, conducts, and coordinates experimental test programs. Plans and holds meetings when appropriate. Prepares and presents reports and presentations as needed. Performs all elements of the job in accordance with established procedures. Prepare the BOM from drawings, create Estimate and pricing and ensure project specifications and compliance are met. Documentation of all working and deliverables and clear the audits with great remarks. Attend project review meetings, take ownership and ensure responsibility for works allocated. What We Look For: Required Bachelor's degree in Mechanical Engineering or a related field. Minimum of 2-4 years of experience in mechanical engineering Strong knowledge of fluid dynamics, thermodynamics, and material science. Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and engineering analysis tools. Experience with industry standards and codes, such as NFPA, UL. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to manage multiple projects and meet deadlines. Ability to demonstrate good leadership skills Proficient in written and verbal communication Added Advantage: Knowledge of energy analysis will be added advantage. Understanding of local building and electrical codes and regulations. Knowledge in Codes & Standards like AHRI, ASHRAE, NBC, SMACNA, LEED etc Knowledge of Heat Load Calculation using HAP

Vehicle Maintenance and Repair Perform routine maintenance and repair tasks to keep vehicles in good running condition. Diagnosis Use diagnostic tools and expertise to identify mechanical or electrical issues. Customer Interaction Communicate with customers to understand problems and explain repair options and costs. Safety and Compliance Ensure all repairs meet safety standards and comply with industry regulations. Technical Knowledge Update Stay up to date with new vehicle technologies, repair techniques, and tools. 🛠️ Responsibilities of a Car MechanicInspect Vehicles Examine engines, transmissions, brakes, steering systems, and other components to assess issues. Perform Repairs Replace or repair worn-out parts like brake pads, belts, batteries, and spark plugs. Oil Changes and Fluid Checks Change engine oil, brake fluid, coolant, and other essential fluids. Use Diagnostic Equipment Operate computerized diagnostic machines to pinpoint problems. Test Drive Vehicles Conduct test drives after repairs to ensure problems are resolved. Maintain Tools and Equipment Keep tools clean, organized, and in good working condition. Estimate Costs Provide estimates for labor and parts to customers. Document Work Maintain accurate records of services performed and parts used. Follow Safety Procedures Use safety gear and follow proper protocols to prevent injuries and accidents. Team Collaboration Coordinate with other mechanics, service advisors, and parts departments.

Job Title: Consultant Pathologist(only for Night Duty 9.00 pm to 9.00 am) Location: Surat / Vapi / Valsad / Bharuch / Ankleshwar / Mumbai Salary : 1,00,000 to 1,50,000/- per month. Job Summary: The Consultant Pathologist will be responsible for overseeing and performing diagnostic evaluations of clinical specimens to aid in disease diagnosis, treatment planning, and prevention. This role involves working closely with clinicians, laboratory staff, and hospital management to ensure accurate and timely pathology services. Key Responsibilities: Diagnostic Work: Analyze laboratory specimens including blood, tissue, and fluids. Perform and interpret results from histopathology, cytopathology, hematology, microbiology, and clinical biochemistry tests. Prepare pathology reports and provide diagnostic opinions. Consultation and Collaboration: Advise physicians and other healthcare providers on test selection and interpretation. Participate in multidisciplinary team (MDT) meetings and case discussions. Quality Control: Ensure laboratory practices comply with regulatory and accreditation standards (e.g., NABL, CAP). Develop and monitor quality assurance protocols and procedures. Supervision and Training: Supervise junior pathologists, lab technicians, and trainees. Provide continuing medical education and training to laboratory staff. Research and Development: Stay updated with advances in pathology and contribute to clinical research. Implement new diagnostic techniques and innovations. Administrative Duties: Maintain accurate records and documentation. Assist in budget planning, procurement of laboratory equipment, and resource management. Qualifications: MBBS with MD/DNB/DCP in Pathology (or equivalent qualification recognized by the Medical Council). Minimum of 5–10 years of experience post-specialization (for senior consultant roles). Valid Gujarat medical Council registration. Skills and Competencies: Expertise in diagnostic techniques and laboratory procedures. Strong analytical and observational skills. Attention to detail with high accuracy in diagnosis. Excellent communication and interpersonal skills. Ability to work under pressure and manage time effectively. Show more Show less

Job Summary Position is for Sales Engineer, Sr Sales Engineer We are looking for Sales Engineer based in Ahmedabad . Laminar Industries is into pneumatics , Hydraulics, Filtration , Compressed air piping . Hoses and fitting business . Suitable candidate should have knowledge of AIr compressors / Pneumatics or Filtration , Responsibilities and Duties Key Responsibility is to cater business directly as well as through dealers in assigned area. Day to Day visits to end users, Identify brown & Green field industrial projects and develop OEMS. Sound knowledge of computers, should be smart in presenting presentations to customers. Candidates with similar knowledge - Air Compressors, Filtration , Pneumatics , Hydraulics, Hoses, Couplings , Compressors and compressed air piping system would be given advantage. Key Skills Knowledge of Computers, Engineering, English communication Required Experience and Qualifications Bachelors of Engineering , Diploma Benefits Probation period for 6 months would be provided where mentoring and training would be given by company. After 6 months probation sales target for next 6 months would be provided to qualify for confirmation. Job Type: Full-time Pay: ₹300,000.00 - ₹400,000.00 per year Supplemental Pay: Commission pay Application Question(s): Are you from compressor / pneumatics / filtration background? We are looking engineer who should have working experience of at least 6 months to 2 years for selling air pneumatics, Hoses , Compressed air piping , Compressed air filtration or air compressors. Preference will be given to those who have worked for CAMOZZI , FESTO , JANATICS, SMC, PNEUMAX, AIRPIPE , Luthra Pneumasys, ECO Fluids , ANJANEY , QUICK AIR or their dealers Location: Ahmedabad, Gujarat (Required)

Admission and discharge of patient. • Orients patients/relatives regarding unit and services. • Assess/identifies patient’s needs and implements interventions for recovery for IPD/OPD. Building rapport with patients/family. Combating stigma and helping patients and their families to deal with it. Performs following nursing interventions: ➢ Checks and records vital signs (TPR, BP, Pain score). ➢ Patient care procedures like maintaining hygiene, assisting in activities of daily living, sponging, steam inhalation, dressing etc. Conveying behavioural observation of patients to the clinical team. ➢ Encouraging patients to take part in therapeutic activities. ➢ Compliance checks on diet. ➢ Records intake output chart. ➢ Administers intravenous fluids and medication as prescribed. ➢ Collecting and sending samples/specimen. ➢ ECG ➢ Tube feeding, administers enema/proctoclysis, suctioning care – if required ➢ Transfusion of blood or blood products. ➢ Assists in CPR • Assists doctors with diagnostic and invasive procedure. Performs routine investigations. Informs Doctors and in-charges of abnormal reports/findings/incidents. Monitors patient at regular intervals as advised. Reports and documents all relevant and significant information. Provides Health education. Ensures proper handing and taking over of patients. Maintains inventory of medications, consumables, crash cart, articles and equipment. Job Type: Full-time Pay: ₹9,836.25 - ₹32,059.69 per month Benefits: Health insurance Schedule: Rotational shift Experience: psychiatry: 1 year (Required) Language: English (Preferred) License/Certification: Haryana Nursing Council (Required) Work Location: In person Application Deadline: 03/06/2025 Expected Start Date: 29/05/2025

Requisition #: 16318 Our Mission: Powering Innovation That Drives Human Advancement When visionary companies need to know how their world-changing ideas will perform, they close the gap between design and reality with Ansys simulation. For more than 50 years, Ansys software has enabled innovators across industries to push boundaries by using the predictive power of simulation. From sustainable transportation to advanced semiconductors, from satellite systems to life-saving medical devices, the next great leaps in human advancement will be powered by Ansys. Innovate With Ansys, Power Your Career. Summary / Role Purpose Join the Ansys Customer Excellence team to assist our customers on all the aspects of their real-world engineering simulation projects and integration of Ansys software in their design workflows and grow Ansys’ business. You will use advanced-level engineering knowledge along with Ansys AI-based platforms to make our customers successful. You will be a part of our positive, dynamic team of enthusiastic and passionate engineers striving to deliver the highest quality solutions to our customers, advancing your pervasive simulation knowledge, experience, and your impact on the success of our customers and Ansys. Key Duties And Responsibilities Deploy and exploit all available resources, including Ansys AI-based platforms to complement your engineering expertise and knowledge of simulation to assist customers in solving their engineering problems and enabling their usage of Ansys Fluids Products. Ensure high Customer Satisfaction and Customer Success that enable customers' usage/deployment/adoption of Ansys software Develop and strengthen long-term relationships with customers. Share your extensive knowledge and experience by creating & updating content to ensure the most relevant help and information is available for customers and internal colleagues. Lead and initiate team projects (e.g. content creation, process deployment, etc.). Submit suggestions for product improvement, when needed. File defect reports and verify fixes adhering to defect reporting processes. Participate in application field testing of new releases to ensure that new features and workflows will address customer requirements. Evaluate the Ansys AI-based support platforms' effectiveness by analyzing the AI-based responses to answer customers' questions, specifically on the accuracy/relevance and subsequent corresponding human corrections. Be enthusiastic about learning and promoting how an LLM and other AI-based technologies can assist engineers' abilities to help Ansys customers. Develop subject matter expertise and specialization on Ansys simulation products and applications Learn and gain expertise in new technical areas as and when required for the team & personal development On an as-needed basis provide expertise-level support to other business functions including Sales and Marketing. Participate in other strategic team and company initiatives, as needed Minimum Education/Certification Requirements And Experience Required education and degree type: B.Tech, M.Tech or PhD in Mechanical or Chemical Engineering or related field Required minimum years of professional experience in an engineering software environment: B.Tech+3, M.Tech+2, or PhD+0 Demonstrated use of Ansys Fluids software or knowledge of other commercial CAE software packages Expert-level knowledge of Fluid dynamics, Heat transfer, Multiphase Modeling, Numerical Methods and Thermodynamics Demonstrated problem-solving skills and ability to implement numerical models to obtain practical engineering solutions to difficult problems Logical problem-solving, strong interpersonal and communication skills, fluent in writing and speaking English Engaging personality, engineering curiosity and willingness for continuous learning Strong organizational and time management skills, possesses a sense of urgency Ability to work independently, as well as with others in a diverse team environment Projects a professional image and demonstrates business acumen, driven to succeed Preferred Qualifications And Skills Preferred education and years of professional experience in an engineering software environment: B.Tech+6, M.Tech+5 3-5 years of experience in customer-facing roles associated with using engineering simulation software, where the ability to identify customer requirements, effectively communicate solutions, and deliver results have been demonstrated Experience in using Ansys tools, like Ansys Workbench, Ansys Fluent, Ansys CFX, and Ansys Space claim is preferred. Experience on multiphase and/or reacting flow physics will be an added advantage Ability to travel domestically up to 10% of the time At Ansys, we know that changing the world takes vision, skill, and each other. We fuel new ideas, build relationships, and help each other realize our greatest potential. We are ONE Ansys. We operate on three key components: our commitments to stakeholders, our values that guide how we work together, and our actions to deliver results. As ONE Ansys, we are powering innovation that drives human advancement Our Commitments Amaze with innovative products and solutions Make our customers incredibly successful Act with integrity Ensure employees thrive and shareholders prosper Our Values Adaptability: Be open, welcome what’s next Courage: Be courageous, move forward passionately Generosity: Be generous, share, listen, serve Authenticity: Be you, make us stronger Our Actions We commit to audacious goals We work seamlessly as a team We demonstrate mastery We deliver outstanding results VALUES IN ACTION Ansys is committed to powering the people who power human advancement. We believe in creating and nurturing a workplace that supports and welcomes people of all backgrounds; encouraging them to bring their talents and experience to a workplace where they are valued and can thrive. Our culture is grounded in our four core values of adaptability, courage, generosity, and authenticity. Through our behaviors and actions, these values foster higher team performance and greater innovation for our customers. We’re proud to offer programs, available to all employees, to further impact innovation and business outcomes, such as employee networks and learning communities that inform solutions for our globally minded customer base. Welcome What’s Next In Your Career At Ansys At Ansys, you will find yourself among the sharpest minds and most visionary leaders across the globe. Collectively, we strive to change the world with innovative technology and transformational solutions. With a prestigious reputation in working with well-known, world-class companies, standards at Ansys are high — met by those willing to rise to the occasion and meet those challenges head on. Our team is passionate about pushing the limits of world-class simulation technology, empowering our customers to turn their design concepts into successful, innovative products faster and at a lower cost. Ready to feel inspired? Check out some of our recent customer stories, here and here . At Ansys, it’s about the learning, the discovery, and the collaboration. It’s about the “what’s next” as much as the “mission accomplished.” And it’s about the melding of disciplined intellect with strategic direction and results that have, can, and do impact real people in real ways. All this is forged within a working environment built on respect, autonomy, and ethics. CREATING A PLACE WE’RE PROUD TO BE Ansys is an S&P 500 company and a member of the NASDAQ-100. We are proud to have been recognized for the following more recent awards, although our list goes on: Newsweek’s Most Loved Workplace globally and in the U.S., Gold Stevie Award Winner, America’s Most Responsible Companies, Fast Company World Changing Ideas, Great Place to Work Certified (China, Greece, France, India, Japan, Korea, Spain, Sweden, Taiwan, and U.K.). For more information, please visit us at www.ansys.com Ansys is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics. Ansys does not accept unsolicited referrals for vacancies, and any unsolicited referral will become the property of Ansys. Upon hire, no fee will be owed to the agency, person, or entity. Show more Show less

A Bachelor's degree in Mechanical or Production Engineering with 5+ years of experience. Author and Approve build plan for Aircraft Systems like ECS, Hydraulics, Flight controls, Mech-Hydraulics, Equipment installations. Mentor and Coach pool of young manufacturing engineers and maintains KPIs for deliverables as set by the organization. Experience and knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, instrumentation, data acquisition and control systems) Create/Modify/Approve Installation plans, fabrication plans, and installation plan audits. Knowledge of surface finishes, coatings, paints, sealants, bonding and grounding. Post-production technical experience with emphasis in commercial/military aircraft sustainment, repairs, spares, and modification programs preferred Create Installation plan in CAPP/MES and Author work instructions. Lead the implementation of Standard works in assembly operations for Boeing products Ensure the prevailing Installation plans are audited and meet the defined standards. Continuously review the existing assembly process and drive process improvements Execute/leads DFM and producibility studies for new product introductions. Participates in the implementation of manufacturing plans. Investigates technical problems. Participates in the implementation of Lean principles and technologies. Ensure compliance to company quality management system requirements. Interfaces with IPTs and internal customers to develop products, skills, knowledge and experience. Show more Show less

Author and Approve build plan for Aircraft Structures & Systems like ECS, Hydraulics, Flight controls, Mech-Hyd, Equipment instl etc Experience and knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, instrumentation, data acquisition and control systems) Create/Modify/Approve Installation plans, fabrication plans, and installation plan audits. Knowledge of surface finishes, coatings, paints, sealants, bonding and grounding. Post-production technical experience with emphasis in commercial/military aircraft sustainment, repairs, spares, and modification programs preferred Create Installation plan in CAPP/MES and Author work instructions. Lead the implementation of Standard works in assembly operations for Boeing products Ensure the prevailing Installation plans are audited and meet the defined standards. Continuously review the existing assembly process and drive process improvements Exercises critical thinking and innovative problem solving Leads the development, identification and implementation of conceptual designs and maintenance of the program architecture for build. Execute/leads DFM and producibility studies for new product introductions. Participates in the implementation of manufacturing plans. Investigates technical problems. Participates in the implementation of Lean principles and technologies. Ensure compliance to company quality management system requirements. Interfaces with IPTs and internal customers to develop products, skills, knowledge and experience. Show more Show less

Main Purpose We are seeking an experienced and technically proficient Senior Lead Flow Assurance Engineer with over 10 years of experience in flow assurance role and over 15 years of experience in Oil & Gas industry. In this role, selected candidate will be responsible for managing flow assurance work during project life cycle, provide technical support to O&M team, interface with cross-functional teams within Company, a Team player and mentor to junior flow assurance engineers. Job Accountabilities (Duties And Responsibilities). Technical Leadership and Project Management Lead and manage the flow assurance work during various phases of project development by interfacing across multiple-disciplinary teams (such as reservoir, pipeline, subsea controls and O&M), ensuring alignment with project objectives and operational goals. Provide flow assurance support to O&M team Provide technical guidance and training to junior engineers and other team members, ensuring continuous development within the flow assurance discipline. Fluid Characterization and Modeling Utilize advanced thermodynamic simulators (Multiflash) to model the Pressure-Volume-Temperature (PVT) behavior of produced fluids, guiding design and operational decisions. Predict and analyze the formation, deposition, and potential blockage of solids such as hydrates, wax, asphaltenes, scale, and sand using modeling. Carryout/check/review flow assurance works (such as inhibitor requirements, pipeline sizing, hydraulic analysis etc.) for various inhouse concepts in order to evaluate concepts on criteria of flow assurance and document the findings Conduct steady-state and transient multiphase flow modeling to assess and optimize production systems, including considerations for artificial lift, thermal insulation, and system operability during production rate changes, start-up, shutdown, and other transient conditions (OLGA/PIPESIM) Good understanding on erosion mechanisms; proficient in performing erosion calculations using DNV methodology Provide inputs for Basis of Design; Review, validate and approve flow assurance scope of works performed by Engineering Consultant in order to ensure timely completion of flow assurance deliverables Develop SOPs for Commissioning/Start-up/Ramp-up/Steadystate/Turndown/Shutdown etc. along with the PMT and O&M Innovation Problem and Solving Lead the development of innovative solutions to complex flow assurance challenges, focusing on improving safety, production efficiency, and cost-effectiveness. Stay updated on the latest engineering developments, tools, and methodologies, and apply them to enhance flow assurance practices. Skills Required (Knowledge And Skills) Proficiency in use of PVTSIM/MULTI FLASH and flow assurance softwares (e.g., OLGA & PIPESIM) Good knowledge of subsea systems Prepare power point presentations on technical aspects to senior management Qualification Bachelors or Masters degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related field. Experience 10+ years of experience in flow assurance and 15+ years of experience in oil and gas industry, with a proven track record of project management. Show more Show less

Industrial Equipment / Machinery Full-Time Job ID: DGC00498 Pune, Maharashtra 7-12 Yrs ₹08 - ₹15 Yearly Job description About Us Magnus Lubricants Private Limited is a leading provider of MAGNACOOL high-performance metalworking fluids and specialty lubricants. We are expanding our presence and seeking experienced, self-driven professionals to lead and manage sales efforts across India. Job Summary As a Sales Manager or Assistant Sales Manager, you will drive business growth, manage key accounts, and lead regional sales initiatives. You will play a pivotal role in expanding market share and building strong customer relationships within the industrial lubricants sector. Key Responsibilities Drive regional sales of metalworking fluids and specialty lubricants. Identify and develop strategic customer accounts in the manufacturing sector. Lead and mentor sales executives or teams (for Sales Manager role). Coordinate product trials, on-site technical support, and after-sales service. Achieve regional sales targets and contribute to national goals. Collaborate with technical teams for customized customer solutions. Maintain accurate sales records and prepare periodic reports. Qualifications & Experience Education: Diploma or Degree in Science or Engineering. Strong communication and presentation skills. Willingness to travel extensively within assigned territory. Assistant Sales Manager: 4- 6 years of experience in industrial consumables or lubricants sales. Sales Manager: Minimum 6 years experience with team management, B2B sales success, and distributor handling. Compensation Competitive salary with performance-linked incentives and travel reimbursements.