Installation of Fire Piping - Purpose: Deliver water or fire-suppressing agents to fight fires. - Key Steps: 1. Design and Planning: Ensure system design meets local codes and standards. 2. Piping Installation: Install pipes, valves, and fittings according to design specs. 3. Testing and Inspection: Verify system functionality and pressure tests. Installation of Fire Alarm Systems - Purpose: Detect fires early and alert occupants. - Key Steps: 1. Design and Planning: Ensure system design meets local codes and standards. 2. Device Installation: Install smoke detectors, heat detectors, and alarm devices. 3. Wiring and Cabling: Connect devices to control panels and power sources. 4. Testing and Commissioning: Verify system functionality and perform regular tests. Key Considerations - Compliance: Ensure installations meet local fire safety codes and regulations. - Quality Control: Use approved materials and follow manufacturer instructions. - Testing and Maintenance: Regularly test and maintain systems to ensure reliability.
Job Requirements '1) Experience in MEP field / fire systems in a contracting company. 2) Knowledge in design of fire protection systems (water & gas based systems) as per Indian and international codes and standards. Knowledge in preparation of hydraulic calculations. Knowledge in design of low voltage systems like fire alarm, PA, CCTV etc. will be an added advantage. 3) Hands on experience in preparing Autocad 2D drawings. 4) Exposure in interacting with consultants, clients & PMC's. 5) Exposure in dealing with vendors and OEM's. 6) Good written and oral communication skills Brief Roles '1) Daily and weekly planning of engineering activities. 2) Preparation and getting approval of product technical data sheets. 3) Ability to understand engineering drawings and prepare shop drawings for approval by consultant. 4) Attending meeting with client/consultant/PMC for drawings/data sheet approvals. 5) Coordinating with operations team for site execution related issues. 6) Regular visits to site to understand design related issues and to provide solutions. 7) Value engineering / optimisation of designs. 8) Preparation of variaiton order statements. 9) Project closeout requirements like submission of as-built drawings, preparation and submission of O&M manuals etc. 10) Preparation of detailed Bill of materials based on approved drawings.
Job Requirements 1) Experience in MEP field / fire systems in a contracting company. 2) Knowledge of contracting procedures. 3) Hands on experience in preparing costing sheets and tendering works. 4) Exposure in interacting with consultants, clients & PMC's. 5) Exposure in dealing with vendors and OEM's. 6) Good written and oral communication skills 7) Good Analytical and Logical Skills. Brief roles:- 1) Study of tender documents and understand commercial and technical requirements. 2) Getting prices from vendors for each products, site execution costs and preparation of detailed costing sheet. 3) Attending techno-commercial meetings. 4) Value engineering. 5) Visit project sites to understand site conditions. 6) Preparation of rate analysis of products for approval by client. 7) Preparation of variation order statement and getting approvals. 8) Preparation of PQ documents 9) Interacting with Client/Customer for order booking and maintaning customer relationship
Job Requirements '1) Experience in MEP field / fire systems in a contracting company. 2) Knowledge in design of fire protection systems (water & gas based systems) as per Indian and international codes and standards. Knowledge in preparation of hydraulic calculations. Knowledge in design of low voltage systems like fire alarm, PA, CCTV etc. will be an added advantage. 3) Hands on experience in preparing Autocad 2D drawings. 4) Exposure in interacting with consultants, clients & PMC's. 5) Exposure in dealing with vendors and OEM's. 6) Good written and oral communication skills Brief Roles '1) Daily and weekly planning of engineering activities. 2) Preparation and getting approval of product technical data sheets. 3) Ability to understand engineering drawings and prepare shop drawings for approval by consultant. 4) Attending meeting with client/consultant/PMC for drawings/data sheet approvals. 5) Coordinating with operations team for site execution related issues. 6) Regular visits to site to understand design related issues and to provide solutions. 7) Value engineering / optimisation of designs. 8) Preparation of variaiton order statements. 9) Project closeout requirements like submission of as-built drawings, preparation and submission of O&M manuals etc. 10) Preparation of detailed Bill of materials based on approved drawings.
1 Experience in MEP, particularly in - Electrical, UPS, DG, Plumbing, HVAC etc. 2 Proficiency in budgeting, tendering, cost control, and Sourcing 3 Skill in preparing & sharing the end-to-end commercial report of all the assigned projects and their status to the reporting manager 4 Cross-functional expertise in managing procurement activity by liaising with vendors for cost negotiation 5 Coordinating with the execution team and finance team to identify, analyze & execute the fund flow for ongoing projects 6 Interfacing with the Legal Department in the formulation of rate contract agreements with all the vendors 7 Adhering to statutory compliances and coordinating with respective teams for submission of releavant doucments 8 Synchronizing with external agencies for techno-commercial negotiations, preparation of tender/contract documents, cost estimates, including billing, variation/deviation proposals, claims 9 Managing the vendor performance, cost-saving opportunity identification, 10 Supervising the process of qualifying & selecting appropriate Vendor in terms of supplier financial status, capacity, capabilities, and business in general 11 Functioning on the month closing activity and providing inputs to work on projections of the annual capex 12 Effective communicator with excellent negotiation skills, leadership qualities, Role & responsibilities Preferred candidate profile
Job Requirements 1) Experience in MEP field / fire systems in a contracting company. 2) Knowledge of contracting procedures. 3) Hands on experience in preparing costing sheets and tendering works. 4) Exposure in interacting with consultants, clients & PMC's. 5) Exposure in dealing with vendors and OEM's. 6) Good written and oral communication skills 7) Good Analytical and Logical Skills. Brief roles:- 1) Study of tender documents and understand commercial and technical requirements. 2) Getting prices from vendors for each products, site execution costs and preparation of detailed costing sheet. 3) Attending techno-commercial meetings. 4) Value engineering. 5) Visit project sites to understand site conditions. 6) Preparation of rate analysis of products for approval by client. 7) Preparation of variation order statement and getting approvals. 8) Preparation of PQ documents 9) Interacting with Client/Customer for order booking and maintaning customer relationship
Installation of Fire Piping - Purpose: Deliver water or fire-suppressing agents to fight fires. - Key Steps: 1. Design and Planning: Ensure system design meets local codes and standards. 2. Piping Installation: Install pipes, valves, and fittings according to design specs. 3. Testing and Inspection: Verify system functionality and pressure tests. Installation of Fire Alarm Systems - Purpose: Detect fires early and alert occupants. - Key Steps: 1. Design and Planning: Ensure system design meets local codes and standards. 2. Device Installation: Install smoke detectors, heat detectors, and alarm devices. 3. Wiring and Cabling: Connect devices to control panels and power sources. 4. Testing and Commissioning: Verify system functionality and perform regular tests. Key Considerations - Compliance: Ensure installations meet local fire safety codes and regulations. - Quality Control: Use approved materials and follow manufacturer instructions. - Testing and Maintenance: Regularly test and maintain systems to ensure reliability.
About the Company: Firepro Systems, is Indias leading specialist contractor in Fire Safety Systems and MEP services, reinforcing our commitment to smart, safe, future-ready infrastructure. We have over three decades of experience in delivering projects with excellence and reliability. Job Title: MEP Design Engineer HVAC (Air Conditioning Only) Experience: 5 15 Years Qualification: B.E. / Diploma in Mechanical Engineering Industry: HVAC / MEP / Construction Role Summary: We are seeking a detail-oriented Air Conditioning Design Engineer with 5 15 years of experience in designing and delivering efficient air conditioning systems across diverse sectors. The ideal candidate will be responsible for system design, equipment selection, technical documentation, and coordination with cross-functional teams for successful project execution and should have basic electrical knowledge to understand SLD. Key Responsibilities: Design HVAC (AC) systems including heat load calculations, ducting layout, chilled and condenser layout, water piping, refrigerant piping, and equipment selection & their positioning for installation. Prepare and review engineering drawings, technical submittals, and BOQs. Coordinate with architecture, structural, and MEP teams to ensure clash-free implementation. Support site teams by providing design intent and resolving technical issues. Ensure compliance with standards like ASHRAE, ISHRAE, NBC, and sector-specific norms IS 0655, SMACNA applicable for ducting work. Note: Selection of chillers, AHUs, pumps, cooling towers, instruments, valves, ADP along with proper designing of ducts, piping with supports etc. are mandatory including knowledge of soft water & water treatment of hard water. Domain Expertise (Building & Factories): Comfort Cooling: Offices, shopping malls with multiplex, hotels, high-rise buildings, libraries, public spaces. Healthcare: Hospitals, ICUs, OTs, infection control, IAQ, cross-contamination prevention. Textile: Humidity-controlled systems for RH consistency. Electronics: Clean rooms (Class 1001000), OEM facilities of integrated chips (IC). Pharmaceuticals: Close control HVAC per cGMP standards. Process Cooling & Precision Manufacturing: CNC, food processing, calibration labs. Special Applications: Data centers, Metro stations (U/G), Airports, Telecom, Thermal or Hydral power stations, Refineries. Skills & Tools: Proficient in HAP, Carrier E20, AutoCAD; Revit (basic preferred) & hands on knowledge of heat load calculation for AC package. Strong technical communication and documentation skills. Knowledge of BMS integration (Optional). Preparation of BOQ with proper costing/estimation of AC (large) system to attend any tender within specific timeline to support sales/contracts team. About the Company: Firepro Systems, is Indias leading specialist contractor in Fire Safety Systems and MEP services, reinforcing our commitment to smart, safe, future-ready infrastructure. We have over three decades of experience in delivering projects with excellence and reliability. Job Title: MEP Design Engineer HVAC (Ventilation Only) Experience: 5 15 Years Qualification: B.E. / Diploma in Mechanical Engineering Industry: HVAC / MEP / Construction Role Summary: We are looking for a technically strong Ventilation Design Engineer with 5 15 years of experience in designing efficient ventilation systems for varied industrial, commercial, and special-use environments. The candidate will be responsible for designing natural, forced, and hybrid ventilation systems tailored to specific customer needs, with an emphasis on power savings, safety, IAQ, and application-based equipment selection and should have basic electrical knowledge to understand SLD. Key Responsibilities: Understand customer-specific requirements to design appropriate ventilation systems (natural/forced/combined). Conduct seasonal heat-load calculations and design of fans (cost-effective), ducts etc. with ADP. Select ventilation equipment (fans, dampers, scrubbers, heat recovery systems, etc.) based on application, efficiency, and safety. Optimize ventilation designs for energy efficiency and power savings without compromising performance. Ensure statutory safety in the selection process (e.g. fire, smoke etc.) Design and integrate controls (e.g., EXV) for managing IAQ, cross-contamination, stale air, odour, dust, humidity, and smoke. Design of wet ventilation systems where required (e.g., evaporative cooling, wet scrubbers). Coordinate with electrical and ELV teams for system integration and control wiring. Specify and integrate appropriate instruments for air quality, pressure, and temperature monitoring which should be used in PG test. Knowledge of PG testing for ventilation system with approval of write-ups. Application Areas: Industrial & Commercial : Warehouses, steel/textile manufacturing hubs, data centers Hazardous Areas : FA injection in petrochemical units, smoke exhaust systems Functional Spaces : Basements, staircases, kitchens, toilets, laboratories, paint shops, lift-wall & lobby. Air Quality & Comfort : IAQ management, air cooling, odour/dust/smoke control, humid/warm air regulation Skills & Tools: Understanding AMCA & ventilation related (CFD analysis), hands on experience in Revit/AutoCAD along with designing of load calculation. Deep understanding of psychrometrics, ventilation rates, air changes, and duct design. Familiarity with codes and standards like ASHRAE, NBC, ISHRAE for ventilation. Good coordination and communication skills for multi-disciplinary project teams. Preparation of BOQ with proper costing of ventilation work of various natures to attend any tender to support sales/contracts team. Knowledge of selection of fans from OEM curves along with pulleys, belts etc. About the Company: Firepro Systems, is Indias leading specialist contractor in Fire Safety Systems and MEP services, reinforcing our commitment to smart, safe, future-ready infrastructure. We have over three decades of experience in delivering projects with excellence and reliability. Job Title: MEP Design & Estimation Engineer PHE (Public Health Engineering) Experience: 5 15 Years Qualification: B.E. / Diploma in Mechanical Engineering Industry: MEP / Construction / Infrastructure Role Summary: We are seeking a skilled PHE Design & Estimation Engineer with 5 15 years of experience in designing and estimating comprehensive plumbing and public health systems for residential, commercial, and industrial projects. The candidate should have a strong understanding of water supply, drainage systems, water treatment, and sustainability practices like rainwater harvesting and water recycling. Key Responsibilities: Water Supply Systems : Identify source of water and design primary and secondary distribution networks based on demand. Demand Assessment : Calculate water consumption needs per building use (residential, broader commercial, healthcare, industrial etc.). Filtration & Distribution : Design filtration systems (e.g. softeners, RO, UV) and ensure clean, safe distribution across all fixtures of water i.e. water treatment. Drainage Systems : Design grey water and black water drainage with appropriate slopes, traps, venting, and access (single/multiple). Storm Water & Rain Water Harvesting : Plan and design rainwater harvesting systems and storm water drainage networks as per regulatory norms. Water Recycling : Integrate STP/ETP systems for wastewater treatment and design reuse networks (e.g., flushing, gardening). Landscaping Systems : Design irrigation and watering systems for gardens and landscapes with appropriate zoning. Sanitary Fittings : Prepare layouts for sanitary fixtures and select fittings based on usage, aesthetics, and cost-efficiency. Knowledge for application of adhesive materials on various pipes to join. Testing & Certification : Oversee water testing (chemical, physical, biological) and ensure compliance with health and safety standards. Estimation Responsibilities: Prepare BOQs and cost estimates for plumbing and PHE systems so that the tender can be submitted on time. Review design changes and assess their impact on material quantities and cost. Coordinate with procurement and vendors for specification-compliant products. Skills & Tools: Proficiency in AutoCAD, MS Excel, and estimation software (e.g., Candy, Bluebeam). Familiarity with CPHEEO, NBC, IS codes, and local plumbing regulations (mandatory). Strong attention to detail, documentation, and coordination skills. About the Company: Firepro Systems, is Indias leading specialist contractor in Fire Safety Systems and MEP services, reinforcing our commitment to smart, safe, future-ready infrastructure. We have over three decades of experience in delivering projects with excellence and reliability. Job Title: MEP Design Engineer Electrical Experience: 5 15 Years Qualification: B.E. / Diploma in Electrical Engineering Industry: Electrical / MEP / Construction Role Summary: We are looking for a qualified and experienced Electrical Design Engineer with 5 15 years of experience in the design and implementation of electrical systems for residential, commercial, and industrial projects. The role requires in-depth knowledge of power supply and distribution systems with safety protocols, DG and emergency UPS systems, and integration of solar PV technologies (optional). Key Responsibilities: Power Supply & Distribution : Overall knowledge of an electrical system. Design and layout of HT (High Tension) and LT (Low Tension) power distribution systems, panels, switchgear, and cabling including proper earthing. Ensure compliance with safety standards and regulations in power system design and installation. Coordinate with utility providers for load sanctioning and metering requirements. Knowledge of electrical equipments needed for various electrical panels (indoor & outdoor). Knowledge of point wirings with various types of materials and knowledge of street lighting. Backup Power Systems : Plan and integrate Diesel Generator (DG) systems with automatic or manual changeover schemes. Design fuel piping, exhaust routing, acoustic treatment, and ventilation for DG rooms. Emergency Power & VPS : Design emergency power systems with Vertical Power Shafts (VPS) and automatic changeover for critical loads (fire pumps, elevators, emergency lighting, etc.). Ensure redundancy and system reliability for essential building services. Solar PV Systems (optional) : Design grid-tied and standalone Photovoltaic (PV) Solar Energy Systems . Perform load studies, inverter selection, panel placement, and net metering integration. Prepare SLDs (Single Line Diagrams), load schedules, DB schedules, earthing and lightning protection layouts. Work closely with architects, HVAC, PHE, and civil teams for coordinated design delivery. Ensure adherence to IS, IEC, NBC, and local electricity board regulations. Knowledge of field testing for various HT & LT panels, transformers, bus ducts as per layout. Skills & Tools: Proficiency in AutoCAD, Dialux/Relux (for lighting design), and electrical calculation tools for preparation of SLD (power & control circuit). Sound knowledge of electrical codes, safety standards, and energy efficiency norms. Strong coordination, documentation, and communication skills. Preparation of BOQ with proper costing of electrical work (HT/LT) to attend tender to support sales team. Knowledge of ELV will be preferred. About the Company: Firepro Systems, is Indias leading specialist contractor in Fire Safety Systems and MEP services, reinforcing our commitment to smart, safe, future-ready infrastructure. We have over three decades of experience in delivering projects with excellence and reliability. Job Title: MEP Construction/Project Manager Experience: 10 15 Years Qualification: B.E. / Diploma in Mechanical or Electrical Engineering Industry: MEP / HVAC / Construction / Infrastructure Role Summary: We are seeking a seasoned MEP Construction/Project Manager with 1015 years of proven experience in managing and executing large-scale MEP projects. The ideal candidate should have hands-on expertise in handling end-to-end site execution, material and labour management, and client coordination for multi-crore MEP systems in high-rise buildings, hotels, and commercial/industrial infrastructure. Key Responsibilities: Independently manage the execution of the following MEP packages : Central Air Conditioning Systems (2030 Cr), Dry & Wet Plumbing Systems (510 Cr), HT/LT Electrical Works including point wiring and SLD (10 Cr), PHE Systems in high-rises and hotels (1015 Cr), ELV Systems (3 Cr+), and Fire Protection & Fire Alarm Systems (8 Cr+). Material Management : Monitor, control, and record the ingoing and outgoing materials at site. Coordinate with procurement for timely delivery of approved materials. Maintain inventory logs and prevent material shortages or excesses. Manage scrap identification, segregation, and disposal as per company protocols. Develop and track execution schedules , labour histograms , and target timelines . Oversee daily site activities including: Quality checks as per technical drawings and standards Housekeeping and safety compliance Labour deployment and productivity monitoring Coordinate with client representatives, PMCs, consultants, and subcontractors to resolve site-related issues and ensure uninterrupted progress. Ensure all statutory compliances are met: PF, ESI, labour licenses, safety protocols, and manpower insurance. Lead testing and commissioning activities: Pre-commissioning and PG testing of all systems, Joint inspections, MOMs, & measurement reports and Final handover with zero snag points Handle all techno-commercial activities : Prepare and raise invoices along with signed protocols Ensure timely certification and payment follow-ups Support project closure including DLP management and BG release Skills & Competencies: Execution expertise in all core MEP disciplines. Knowledge of material control systems and scrap management procedures. Strong understanding of HT/LT electrical systems, SLDs, and testing protocols. Clear understanding of safety norms and statutory labour compliances. Techno-commercial ability for billing, client coordination, and certification. Domain Expertise: High-rise residential and commercial projects Hotels, hospitals, malls, and infrastructure campuses Projects involving PMCs, consultants, and multiple vendors