87 Fat Jobs - Page 3

Design and engineering of process instrumentation system Instrumentation detail engineering front end engineering Preparation of instrument list, datasheet, IO list, and motor list, BOQ understanding PID & process control logic Project Documentation

3= Years of Experience and knowledge in manufacturing, Quality Control & inspection Experience & knowledge of Electrical Routine & Type tests as applicable to relevant equipment’s. Experience & knowledge of Functional test & FAT of E &I equipment’s.

Role & responsibilities As an Instrumentation / Electrical Engineer at Sungov Engineering, you will play a key role in both proposal engineering and post-order execution of skid-mounted process systems. These include filtration skids, fuel gas conditioning systems, heater skids, and other engineered equipment packages. This role is ideal for professionals with practical exposure to instrumentation and electrical work on process equipment especially within fabrication shops, testing environments, or operational plant settings. Proposal Engineering Responsibilities: Review client specifications for electrical and instrumentation (E&I) scope in RFQs Identify relevant requirements, technical deviations, and interface points Coordinate with vendors for control panels, instruments, cables, junction boxes, etc. Prepare I&E cost estimates and BOMs for proposals Address customer technical queries (TQs) during bid evaluation Post-Order Engineering Responsibilities: Develop Technical Delivery Conditions (TDCs) for instrumentation and electrical sub-vendors Review and approve vendor documents such as datasheets, GA drawings, wiring diagrams, and hook-up plans Support procurement with vendor evaluation and compliance checks Coordinate with QA/QC for inspection of E&I components and FATs Provide remote or on-site assistance for installation and commissioning, when required Preferred candidate profile 5-8 years of experience in industrial equipment manufacturing or process plant operations, with hands-on exposure to instrumentation and electrical work on skid packages or process systems Proficient in interpreting P&IDs, hook-up drawings, wiring diagrams, instrument index, cable schedules, JB layouts, and control panel schematics Familiar with specifications from clients such as EIL, Shell, ONGC, and accustomed to project documentation and compliance reviews Strong coordination skills with vendors, fabrication teams, and panel assembly/test vendors Good communication skills with the ability to handle client technical queries Willingness to travel for short durations for inspections, FATs, or commissioning support

Experience in Vaccine/Injectable/Sterile manufacturing setup Review and evaluate facility, utility, process equipment & instrument design Prepare and review URS, DQ, FAT, SAT, IQ, OQ, PQ documents Conduct Computer System Validation (CSV) as per GAMP & 21 CFR Part 11 Coordinate with project teams to meet timelines and milestones Ensure compliance with GMP and regulatory standards Investigate deviations, failures, and non-conformances Identify root causes and implement CAPA Support audits and inspection readiness activities Job Location: Kadi, Gujarat ( Bus facility available from Ahmedabad, Kalol & Kadi) Note: Immediate joiners will be preferred first

Lead and support subsea system design, controls integration, hardware deployment, and reliability engineering for global offshore oil & gas projects. Collaborate across disciplines to optimize system performance and lifecycle integrity. Required Candidate profile 10–25 years of expertise in subsea controls, H/W, and reliability engineering. Strong leadership, vendor management, and experience in RAM/FMEA tools, API/DNV specs, and cross-functional coordination

Job Description: Job Opening: Shortening Production (FMCG Sector) Location: Khopoli (Relocation Required) Experience: 14+ years in Edible Oil / Food Processing Industry Key Responsibilities: Lead shortening and bakery fat production operations Achieve monthly production targets while ensuring optimal resource utilization Ensure compliance with food safety & hygiene standards (FSSAI, HACCP, GMP) Coordinate with Planning, QC, R&D, Refinery, and Warehouse teams Manage oil mass bleaching, product trials, and inventory control Prepare production reports and conduct daily team meetings Handle audits and implement auditor recommendations Requirements: B.E. (Chemical); Post-Graduation preferred 715+ years of experience in edible oil / bakery fat / food manufacturing Strong leadership, communication, and team management skills Hands-on experience in production planning, process optimization, and compliance Clear verbal and written communication Interested? Send your CV to chinmaya@topgearconsultants.com with the following details: Current & Preferred Location Highest Qualification Total Experience Current & Expected Salary Notice Period Availability for Interview More Info: www.topgearconsultants.com Chinmaya | HR Associate LinkedIn: https://www.linkedin.com/in/chinmaya-ambre-9582572bb

Role & responsibilities SCADA Projects/Integration with PLCs (Siemens/Rockwell/Schneider/Mitsubishi etc.) Historian (Proficy Historian/ Relational database as Historian) Reports Development/ VB customization Automation software (SCADA/PLC/Historian)

Position: WH Executive Security & Loss Prevention. Work days: 6 working days (Mon to Sat). About Swiggy Instamart. Swiggy Instamart is a leading fast-commerce service providing a wide range of groceries and daily essentials delivered swiftly to our customers. Our warehouse operations are critical to our success, and the Security and Loss Prevention (SLP) team is instrumental in safeguarding these operations and ensuring operational integrity.. Job Summary. The Executive SLP is responsible for supporting the Warehouse Lead in implementing security measures, investigation, loss prevention initiatives, and ensuring adherence to company policies at the warehouse. This role is essential for reducing shrinkage, safeguarding inventory, and conducting audits to ensure the effectiveness of security processes.. Key Responsibilities. Assist in process improvements for inventory protection and loss prevention.. Conduct audits (e.g., inventory, CCTV, high-value items) and maintain daily reports.. Monitor access control and surveillance systems to prevent security breaches.. Support investigations of theft, fraud, and other such incidents.. Train warehouse employees on security protocols.. Conduct quarterly fire and safety drills and maintain emergency pathways.. Qualifications. Graduation with experience in Security, Loss Prevention, or Inventory Management.. Prior warehouse experience and knowledge of security systems is an advantage.. Effective communication skills; proficiency in English and a local language.. Ability to work in a fast-paced environment.. Desired Qualifications. Security certifications and experience in CCTV management preferred.. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regards to race, color, religion, sex, disability status, or any other characteristic protected by the law”. Show more Show less

Notice Period: Immediate to 30 Days Job Location Bangalore Role: System Test Engineer Experience : 3 +Years Skills : FAT, SAT, PLC, SCADA Testing, Rotary compressor machines, panel wiring and Piping

GIFTCL invites application for the position of Assistant Engineer - Water Infrastructure (on contract). This is a contractual position for a period of 5 years. The remuneration will be commensurate with qualification and experience. The candidate should have done B.E./B.Tech. in Water Resource / Environment / Hydraulics / Fluid / Electrical / Automation / Mechatronics / related engineering fields with 0-2 years of experience. Detailed job description is as under, Basic knowledge of water/wastewater treatment processes. Assist in design, execution, erection & commissioning of WTP/STP & solid waste facility as per technical specifications of the tender. Stay up to date with relevant codes, standards, and regulations pertaining to water and drainage & solid waste management projects. Review of QAPs, datasheets, GADs, GFC drawings, and coordination with relevant stakeholders for approval and implementation. Prepare daily/weekly progress reports and submit them to senior engineers. Maintain and manage all project-related documentation, ensuring accuracy, quality, and compliance with company standards. Process and track bills related to water and drainage projects including and management of financial documentation. Prepare detailed technical reports, feasibility reports, and progress reports for water and drainage management projects. Compile data and information from various sources to create comprehensive and accurate reports. Review and execution of plant GFC drawings, including integration of MEP components. Possess a thorough understanding of water and drainage management principles, including hydraulics. Understanding, support and hands-on involvement in plant processes and electrical systems, automation, PLC/SCADA & work with plant automation. Conducting Factory Acceptance Tests (FATs) and inspections for project materials. Support in ensuring quality assurance, adherence to HSE (Health, Safety & Environment) norms, and compliance with statutory standards. Competencies Required : Preferably, the candidate should be Bachelors Water Resource / Environment / Hydraulics / Fluid / Electrical / Automation / Mechatronics / related engineering fields from premium institute. Having experience of 0-2 years in relevant field Can Supervise and update the status of works going on site & Ability to work in group. Hardworking, with good knowledge of handling site and team, effective communication skills, Can study the drawing and implement the same at site. Experience of recording of works, billing, physical verification for payment and audit purpose. Shall be proficient in computer (MS Word & Excel). Shall be able to work on AutoCAD. Job Location: GIFT City, Gandhinagar Last date to submit application is 3rd July 2025.

Design, develop, and implement automation systems using PLC and SCADA. Prepare FDS and control philosophy documents. Program, test, and debug PLC logic and SCADA interfaces. Configure HMI screens and data logging/reporting functions. Required Candidate profile Conduct factory acceptance test (FAT) and site acceptance test (SAT) Good understanding of engineering drawing and design Experience in batch processing, continuous manufacturing, utilities automation

Development and deployment of SCADA, DMS, OMS, DMS in a Virtualized environment Understanding of Power system, distribution, Substation and Field devices Transformers, RTU, FRTU, FPI, circuit breaker, Feeder, Tap changer etc. Good understanding of IT infra- Servers, DNS, Firewall, VMs Database handling SQL, Custom Reports GIS integration, CIM import and export Networking, IT Infra, Cybersecurity Integration with client system (e. g. SAP) with REST API/JSON, SOAP, FAT/SAT Experience in SE , EcoStruxure ADMS or GE, OSI, Siemens Experience: 3-8 Years Qualification: BE/BTech/MTech in Electrical/ Electronics Engineering/Power systems Work Locatio

"We're improving the way we live and work by intelligently connecting energy systems, buildings, and industries!! Smart infrastructure from Siemens makes the world a more connected and caring place – where resources are valued, where impact on the world is considered, where sustainable energy is delivered optimally and efficiently. It provides the flexible infrastructure to allow society to evolve and respond to changing conditions. Technology and the ingenuity of people come together to be at one with our environments and to care for our world. We do this from the macro to the micro level, from physical products, components, and systems to connected, cloud-based digital offerings and services. Siemens offers a broad portfolio of grid control and automation; low- and medium-voltage power distribution, switching and control; and building automation, fire safety and security, HVAC control and energy solutions. System Engineer- Substation Automation Organization- Smart Infrastructure Business Unit - Electrification & Automation Job Family – Engineering Sub Job Family – System Engineer Job Type- Full time Location – Gurgaon, Haryana Job overview System Engineer will be responsible for engineering, Design and configuration of Substation Automation Systems & preparation of Design & Engineering documentation etc. in coordination with factory and HQ team/associated country (as applicable). Shall be responsible for handling/supporting various requirement of substation schemes used across various voltage levels in India and Abroad for a variety of customers that include Central/State/Private Utilities, Industries, and Infrastructure power systems (as applicable). The incumbent will be responsible for the project lifecycle that includes the various project phases like Understanding the client requirement, Preparation of detail design/documentation/calculations, Approval of design/documentations from customer, ordering the required material to the factory and support to Project Management/Factory/Commissioning team for successful execution of the Project. Shall be required to travel to factory/client places on need basis. Supporting sales and pre-sales/tender stage for engineering related queries. Understanding the customer specific system specifications and design/propose system accordingly. Preparation of various types of System Architecture based on system requirements. Preparation of engineering documents like signal list, FDS, O&M manuals etc. Configuration of Substation automation systems like HMI, BCU configuration and database preparation. Should have knowledge of networking topologies (Ring, HSR, PRP etc.) Discussion with customer for drawing approval/resolution of query. Preparation of design using Siemens make products/solutions like A8000 RTU, S8000, SAS, PAS, WinCC etc. Understanding of Control and protection schematic for various power system equipment. Preparation of FAT/SAT/GTP/TTR/FDS/HEAT LOAD documents. Basic to advance knowledge of cyber security solution/concept used in substation level. Flexible working with global client’s time zone. Candidate will be part of the REC (Remote Engineering Center) and will be responsible for engineering activities of client from overseas/domestic. Eligibility criteria / Skill Sets B. Tech / B.E in Electrical/Electronic Engineering. 5 - 10 years of relevant experience. 1-3 years Commissioning / customer service / FAT experience will be an added advantage Hands-on Experience over Siemens Make RTU A8000 and other Siemens Automation solutions. Advance knowledge of IEC-61850 ed1/2/2.1 protocol standards. Knowledge on different serial and ethernet based protocol (IEC104, IEC101, MODBUS TCP/IP, Profibus etc.) used in Substation Automation System. Knowledge of Siemens configuration toolsSIMATIC WINCC/SCC, Toolbox, SICAM Device Manager, DIGSI, SICAM PAS etc. Basic understanding of cyber security implementation required for products and configuration level Drafting software knowledge like Visio, Auto CAD etc. and Knowledge on IoT applications will be added to the advantage. E Base software knowledge will be added advantage. Has good interpersonal, negotiation and communication skill. Proactive and growth mindset approach to deliver high quality deliverables to end client. Fast learner and able to work independently or as a team player. Able to work under minimum or less supervision. Shall have good knowledge of Windows, Servers, MS Office etc. "WE DON'T NEED SUPERHEROES, JUST SUPER MINDS! WE’VE GOT QUITE A LOT TO OFFER. HOW ABOUT YOU We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality and we welcome applications that reflect the diversity of the communities we work in across Gender, LGBTQ+, Abilities & Ethnicity. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination, and help us shape tomorrow Find out more about Smart Infrastructure athttps://new.siemens.com/global/en/company/topic-areas/smart-infrastructure.html and about Siemens careers atwww.siemens.com/careers"

Virtual Walk-In Interview for IT Engineers _Harita Techserv Pvt Ltd Interview Details: Interview Date: 16 -June-25 to 20 -June-25 (Monday to Friday) Interview Timing: 4.00 PM - 7.00 PM Virtual interview link: https://meet.google.com/acb-oniz-gvp Notice Period: Immediate to 30 Days Job Location Bangalore Role: System Test Engineer Experience : 3 +Years Skills : FAT, SAT, PLC, SCADA Testing, Rotary compressor machines, panel wiring and Piping

Department Commissioning and Qualification (USP / DSP / Clean utilities) How you might spend your days (Main Roles & Responsibilities) As Senior Engineer C&Q, youll be working with highly skilled SeniorEngineers and Engineers and still growing across Denmark and Indian teamswhere youll: Would like to help making complex biopharma facilities more sustainable. Driving the project with Science and Risk based Validation (SRV) concept. Work very closely with our customers Have high knowledge of process equipments systems Should have knowledge on terminologies of symbols used in PID. Execute C&Q activities with multiple stakeholders like (Engineering responsible, Design consultant, Vendors, and QA) of the project organization Align quality and validation concept with customers quality system & validation concept Define scope of C&Q activities in project and scope of work within quality work package incl. relevant C&Q activities Ensure changes to scope are brought to the attention of Project Management. Generate validation deliverables like IQ, OQ, PQ protocols and reports, etc. Act as Smarter Execution consultant for Project Members. Ensure C&Q documentation is in compliance with GMP and GEP (incl. ASTM E2500). Conduct follow-up on QAP planned C&Q activities Who you are (Preferred Competencies) We care about who you are as a person. In the end, how you work, and yourenergy is what impacts the effort we do as a team. As a Biotech person,you: Thrives in a fast-paced environment with many concurrent tasks. Support onsite and offsite activities, such as: FATs, SATs, IOQ and PQ Executions and System Walkdowns. Hands on experience in planning / directing C&Q activities of process equipments (upstream and downstream and clean utilities) in DS facility qualification Should have hands on experience in validation deliverables like URS, design review, P&IDs, FAT, SAT, IQ, OQ, PQs, protocols, and reports generation & execution, etc. Should have good communication and collaboration skills enabling interaction with many stakeholders from different functions and cultures. The miles youve walked (Education and WorkExperience) In all positions there are some things that are needed, and others a bonus. Webelieve these qualifications are needed for you to do well in this role: Bachelors or masters degree in a relevant science, engineering, or pharmaceutical field. 10-15 years' experience performing commissioning and / or qualification activities in an FDA regulated industry. Have hands on experience in validation deliverables like URS, design review, P&IDs, FAT, SAT, IQ, OQ, PQs, protocols, and reports generation & execution, etc. Should have knowledge with recent edition of ISPE C&Q and GAMP and regulatory guidelines USFDA, EU GMP, Annexure 11 & 21 CFR 11 and ICH guidelines.

Ensure FAT/SAT Doc.Validation with FTR Close Coordination with Project Team for validation of daily activities Conduct field inspection of all the routes assigned to check quality assurance on field. Support the project team on field to achieve FTR

POSITION OVERVIEW Design and execute performance, safety, and compliance tests for grid-scale and other BESS, supporting engineering for IEC & UL type tests, FAT, SAT, routine test and customer-specific requirements. DUTIES AND RESPONSIBILITIES Develop test plans at different levels upto system level as relevant standards or company process. Operate HIL (Hardware-in-Loop) setups to validate BMS logic under fault conditions. Field & Lab Work Support for FAT (Factory Acceptance Tests) and SAT (Site Acceptance Tests). Support for IEC and UL type tests Support for routine and customer specific requiremenst in testing Maintain DVP&R (Design Verification Plan & Report) traceability. EDUCATION & QUALIFICATIONS Bachelors in Electrical Engineering. 3+ years in BESS/renewables testing (lab or field). REQUIRED SKILLS Standards: Basic understanding of UL & IEC, NFPA 855. Soft Skills: Data-driven problem-solving, cross-team collaboration. Interested and suitable candidates can share their resume to vibin.george@tataautocomp.com

ETS System Engineer - TAS Job Summary If you are a TAS expert professional, Emerson has an exciting role for you! We are looking for a TAS System Engineer in Oil and Gas domain to work with our ETS Systems Team. This role will work independently and as a part of a team to design, implementation & engineer the Oil and Gas Projects for DeltaV etc. You will participate in project-wide reviews of requirements, system architecture, and detailed design documents, engineering, site surveys, FAT support, commissioning etc. We value autonomy, self-reliance, fast movers, a passion for robust and maintainable tests, and above all, the ability to ship a quality product. In This Role, Your Responsibilities Will Be: Design & documentation. Maintain the skill level of the whole engineering team. Contribute to the overall quality of the organization in the engineering space. Ensuring high performance on a variety of platforms. Creating standard protocols & documentation for repat use. Participation in Pre FAT, FAT, SAT etc Review Deliverables for Quality & Accuracy with Peers & Lead. Monitor Compliance to process/Targets Maintain QMS system for defects, rework & other indicators Maintaining Cost, quality & schedule as per contractual terms Who You Are: You promote high visibility of shared contributions to goals. You quickly and significantly take action in constantly evolving, unexpected situations. You actively seek input from pertinent sources to make timely and well-informed decisions. You handle the risk that comes with moving forward when the outcome is not certain. For This Role, You Will Need: Engineering degree & equivalent work experience 2 to 3 years of DeltaV configuration and testing experience - Terminal experience preferred Knowledge of DeltaV components (Database (IO, Alarms and Events, Namedset), SFC configuration, EQM configuration, Class and Instance Configuration, Graphics configuration VB script knowledge preferred Basic knowledge of SQL (queries, SP, functions) is preferrable Basic knowledge of reporting packages (Crystal Report, SSRS) is preferrable Must have outstanding ability to work with people at all levels and must be a team player Field Instrumentation knowledge for Flow meters, pressure & temperature transmitters, control valves etc. Preparation of Project Cycle Documents like Functional Design Documents, Control Narratives, Test Procedures etc. FAT and SAT experience of TAS with domestic and international clients Customer/vendor/Factory Liaison to fulfill documentation and inspection requirements. Coordinate Tests/Inspections of all bought out/fabricated items. Computer skills in Windows, Outlook, MS Word, Adobe Acrobat and Excel. Preferred Qualifications that Set You Apart: Degree in Instrumentation & Control / Electrical / Electronics Engineering Basic understanding of networking protocols and concepts Capable of describing and documenting for overall Project strategy Contribute to and help maintain the engineering team Excellent written and verbal communication skills Innovative mind set. Thrive for Results Being Organizationally Savvy Interpersonal Savvy Business Ethics & Integrity

Key Responsibilities : 1. Installation & Commissioning : Oversee the installation and commissioning of Fire Suppression, Fire Detection, and Gas Detection Systems. Perform system integration and field testing for systems like Schrack, Honeywell, Ravel, Notifier, Morle, New Fire, Swastik, Kidde, and Rotarex. Ensure compliance with all safety codes, standards, and company procedures. Troubleshoot and resolve any system or installation issues during commissioning. 2. Site Management : Supervise site activities, including installation, testing, and commissioning, ensuring the project is on schedule and within budget. Manage manpower on-site, ensuring the team is effectively utilized and the work is carried out according to the project plan. Coordinate with other site teams (civil, electrical, etc.) to ensure smooth integration of the fire systems with other systems. 3. Documentation & Reporting : Prepare and maintain detailed project documentation, including site reports, installation protocols, testing records, and final handover documents. Prepare and submit system design, equipment specifications, and test reports. Ensure all required documentation is submitted to clients and regulatory authorities on time. Support project managers with project tracking, progress updates, and reporting. 4. Client Interaction : Liaise with clients to ensure that their requirements are understood and met during the project lifecycle. Conduct site surveys and provide technical advice during project implementation. Ensure post-installation training is conducted and the client is satisfied with the systems functionality. 5. Safety & Compliance : Adhere to all safety procedures and regulations during the installation and commissioning phases. Ensure that all work is completed in compliance with local fire safety standards, including NFPA, UL, and other relevant codes. 6. Technical Support & Troubleshooting : Provide technical support for troubleshooting and resolving issues with installed systems. Assist the service team with maintenance and corrective actions after installation. Key Requirements : Bachelors Degree in Instrumentation/Mechanical/Electrical Engineering, or a related field. (or equivalent experience) Minimum 3-15 years of experience in the installation, commissioning, and testing of Fire Suppression, Fire Detection, and Gas Detection Systems. Proven experience with systems from brands such as Schrack, Honeywell, Ravel, Notifier, Morle, New Fire, Swastik, Kidde, Rotarex, etc. Experience in site supervision, manpower management, and handling documentation related to fire safety projects. Proficient in using MS Office Suite (Word, Excel, PowerPoint) and project management tools. Strong project management and organizational skills. Excellent communication skills (both written and verbal). Ability to work under pressure and meet deadlines. Strong leadership skills with the ability to supervise and motivate site teams. Problem-solving and troubleshooting skills.

Job Objective- To lead and manage the Final Inspection and FAT (Factory Acceptance Testing) processes for granulation line machinery. This includes supervising and guiding the FAT team to ensure all machines are inspected, tested, and verified strictly in accordance with the Customer's URS (User Requirement Specification) and internal quality standards. The role involves ensuring that all functional, mechanical, electrical, and software aspects of the machine meet performance expectations before dispatch. Additionally, act as a technical expert during FATs, representing the company in front of customers, addressing their queries, and ensuring a successful sign-off. Primary responsibilities- Functional- Quality Assurance Expertise: Demonstrate a comprehensive understanding of quality assurance (QA) processes, ensuring all FAT activities align with company standards, customer requirements, and regulatory norms. FTR (First Time Right) Implementation: Collaboratively lead the FAT team to achieve First Time Right execution across each stage of inspection and testing, minimizing rework and enhancing process efficiency. Execution & Problem Solving: Plan and execute FAT activities in accordance with project timelines. Identify operational challenges during FAT and inspection and proactively develop and implement effective solutions. Customer & Third-Party Handling: Serve as a subject matter expert for handling customers, Third Party Inspectors (TPI), and internal stakeholders during FATs, ensuring clarity, confidence, and satisfaction throughout the inspection process. Customer Complaint Analysis & CAPA Support: Lead the analysis of customer complaints, contribute to root cause analysis (RCA), and support the development and implementation of Corrective and Preventive Actions (CAPA) to ensure continuous product improvement. Continuous Improvement Initiatives: Drive and contribute to continuous improvement efforts by identifying process gaps and implementing changes that enhance FAT quality, reduce testing time, and ensure operational excellence. Technical Clarifications: Consult with Managers or Project, Engineering, Automation Heads for clarification on discrepancies related to part specifications, drawings, or documentation to ensure issues are resolved before FAT execution. Documentation & Compliance Knowledge: Maintain sound knowledge of qualification protocols, certifications, calibration procedures, and regulatory documentation required for successful FAT execution in a pharma environment. Pharma Equipment & Testing Expertise: Possess deep understanding of pharmaceutical machinery and their standard functional testing procedures, including compliance with cGMP, GAMP, and 21 CFR Part 11 requirements. Audit & Compliance Standards: Be familiar with standard auditing methodologies (e.g., ISO, ASME) and apply non-destructive testing (NDT) procedures as required during inspection. Cross-functional FAT Collaboration: Collaborate with cross-functional teams to highlight and resolve issues that may affect on-site installation and commissioning, ensuring all concerns are addressed prior to dispatch. Site Readiness Optimization (I-FAT): Ensure installation readiness by executing effective Internal FATs (I-FAT) at the factory, thus minimizing site installation time and reducing resource wastage. Validation Document Review: Review and verify all validation and qualification documentation during I-FAT, ensuring alignment with customer expectations and regulatory compliance. Site Issue Resolution Coordination: Act as the central point of coordination for resolving factory-originated issues identified at the site, enabling immediate corrective actions. CAPA Team Participation: Actively participate in the CAPA team by providing technical insights and support for comprehensive root cause analysis of site issues. Spare Parts Coordination: Oversee and coordinate the spare parts dispatch process from the factory, ensuring timely availability and accuracy. Manual Development: Lead the development and localization of Indian versions of Operation, Installation, and Control Manuals for machinery and associated accessories. Pre-dispatch Inspection: Collaborate with the dispatch team to conduct final pre-dispatch inspections, ensuring all machines are shipment-ready and compliant. Supply Chain Coordination: Coordinate with procurement, stores, and planning teams to eliminate short or false supply issues and ensure complete, accurate shipments to customer sites. Key Result Areas- - Cross-Functional Collaboration & Quality at Source - Quality Compliance & Standardization - Process Improvement & Efficiency Optimization - Customer Expectation Alignment - Safety and Risk Management Qualification - BE Mechanical Experience - 8 to 12 years Location - Shirwal Transport facility will be provided

Role & responsibilities Responsible for performing of rolling stock ( Car Body, Bogie, cabling interior and exterior fitting, acceptance test of the trains ( traction, break test, acoustic emission and energy observation) inspection at manufacture place as per customer approved inspection and test plan. Inspection of rolling stock( Car Body, Bogie, cabling interior and exterior fitting, acceptance test of the trains ( traction, break test, acoustic emission and energy observation) inspection at manufacture place as per customer approved inspection and test plan. Identification of non-conformance and deviation and recommending professed corrective action. Interacting with manufacturer, customer, and resolve if any technical problems, Day-to-day line management of the FIC Engineers, ISA Expert and IC Expert who are based at the Train Manufacturers Facility. Distribution of work amongst the key personnel in accordance with the scope of work, approved ITP plans and experience/qualification of the FIC engineers. Observe site activities Meet with the Manufacturer representatives Participate in critical phases of manufacturing by: Communicating and verifying compliance Organizing audits and inspections, specifically monitoring appropriate corrective and preventative actions, and Acting on escalated unresolved non-conformities identified by either the Client or FIC. Review the ongoing activities regarding to ISA of Rolling Stock Reviewing and providing feedback to Manufacturers Inspection and Test Plan(s) Reviewing Log Books prior to factory release of the NEWLY DEVELOPED METRO CARS vehicles for completeness and compliance Providing assurance that all records established provide evidence of conformity to requirements and the effective operation of Manufacturers quality management system are controlled, appropriately identified, stored and protected such that Regular reporting of information, Logs, Reports etc. to Client Critical items would be closely monitored and reported in advance. Day to day monitoring of the Independent Certification of manufacturing facility/capability of Rolling Stock and its Subsystem, quality assurance of the manufacturing facility etc. Inspect or verify all major phases of construction Undertake pre-production audits and report details of observations Undertake in-process inspections Undertake hold-point inspections and Witness points inspections in accordance with Manufacturers Inspection and Test Plan(s) Witness Routine Testing activities Witness First Article Inspections within Contractors works Witness Type Testing activities in Contractors works Preferred candidate profile Graduate Engineer BE/ B. Tech (Mechanical) with min. 15 + years post completion of graduation Three successful execution of the rolling stock inspection of the metro/mono rail projects Knowledge on welding. Prepared having certified course on welding. Knowledge on Quality management system and documentation.

Role & responsibilities Lead the FAT & Final Inspection Team. ( 4-6 Members ) Co-ordinate and liaison with customer / TPIs for conducting Factory Acceptance Tests. Planning, scheduling & conducting Factory Acceptance Tests Inspection and test reports submission and approvals from customer Co-ordinate and liaison with Project Management Team for inspection calls to customer / TPIs. Provide necessary assistance to Engineering team in new projects related to inspection, test and test facilities. Submission of New Projects MQP / QAP to Project Management / Customers as per tender requirements. QA Member of New Product Development Team. Support and co-ordination for new development parts. Responsible for final inspection and ensure zero customer complaints. Rejection analysis and CAPA initiation at final inspection. Customer Complaint Analysis and CAPA initiations. Implement 5 S and improvement initiatives in Lab and QA. Responsible for NABL Lab Mechanical Stream testing. Preferred Male Candidates only. shifts details : 3 shifts.

As a Customer Coordination Commissioning Engineer, you will act as the primary point of contact for customers, ensuring smooth communication and successful project commissioning. You will be responsible for managing commissioning activities, troubleshooting, and ensuring timely execution of automation and control system projects. Key Responsibilities: Act as the liaison between customers and internal teams to ensure project milestones are met. Plan, execute, and oversee the commissioning of control systems (PLC/DCS/SCADA). Conduct site walk-downs, system testing, and verification of I/O interfaces. Support customers in understanding system functionality and troubleshooting issues. Coordinate with engineering teams for logic simulation, system integration, and testing. Assist in Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT). Ensure compliance with safety and quality standards during commissioning. Document commissioning processes and report project status to stakeholders. Provide post-commissioning support and customer training on system operations.

To coordinate for Site Complaints from Factory for "Immediate Correction" at site. To be a part of CAPA Team to ensure CAPA against each site complaint by helping in Root Cause Analysis. To centrally coordinate for "Spare Part Activities" from factory. To develop Indian Versions of Operation & Installation Manuals & Control Manuals for machines / accessories. To work as a part of dispatch team to conduct pre-dispatch inspections. To coordinate with respective departments to control the short or false supply to site.Great understanding of QA Processes. Collaboratively work with team to achieve FTR at each process Work accordance with planning & do execution, Work on challenges faced during, find our solution for the resolution of challenges. Expert in handling FAT/ TPI / Customer for FAT. Analysis of customer complaints & support for the CAPA process. Work on Continuous improvement process. Get consultation from Manager for clarification on part discrepancies. Knowledge about Qualification Documents / Certification / Calibration procedures of parts Knowledge about pharma machineries & testing procedure. Knowledge about standard Auditing processes & NDT processes (ISO, ASME etc) To work as a part of FAT Team for highlighting issues affecting installation at site & getting those corrected from respective depts. To ensure the Site Installation time is reduced with effective I-FAT. To review the Validation Documents during I-FAT to ensure Site & Customer Requirements are addressed in the documentation, To review Mechanical BOM, ensuring all the material required on the site holding installation is added to BOM & being dispatched along with machine. To implement learning from the site in I-FAT protocols for all machines to ensure maximum possible tests are conducted in factory for Electrical & Mechanical Items. To develop methodology to minimize or eliminate Software modifications required at site during installation. To re-structure the packing slip to add Tag No. to the packing slip & streamlining the process of packing slip generation for Electrical & Mechanical Items, People development Guide the team for the Self certification, FTR Process, Compliance to customer expectation. Key Result Areas- Development of strong relationship with CFT Members to achieve quality at source in each activity. Ensure compliance with quality standards and procedures. Identify the opportunities for process improvement to enhance a product quality streamline inspection procedure & optimise the efficiency without compromising safety & compliance to customer expectation

Develop Safety System Design Perform I/O to Safety Logic Solver Assignment Define Software Concepts FAT , SAT exp is must Define third party interfaces (eg. Addressable FGS.)