37 Ethernetip Jobs

You are a skilled and dedicated PLC Electrical & Control Panel Engineer/Technician with expertise in field instrumentation, PLC control panel wiring, and electrical troubleshooting. Your role involves providing expert support at project sites, interpreting PLC wiring layouts, tracing field instrument wiring, and performing calibration and commissioning tasks. You will work with various tools and equipment, access PLC panels and OEM control systems, and ensure proper documentation of test results and observations. Your responsibilities also include adhering to site safety protocols and industrial standards. Key Responsibilities: - Provide expert support for field instrumentation and electrical troubleshooting at project sites. - Read, interpret, and understand PLC control panel wiring including DI/DO/AI/AO and Modbus/Ethernet communication layouts. - Trace, track, and validate field instrument wiring and perform root cause analysis for any issues encountered. - Perform wiring verification, loop checking, and troubleshooting of control panels, MCC panels, VFD panels, isolators, and signal splitters. - Calibrate and commission field instruments as per manufacturer manuals and project requirements. - Work with various tools and equipment including multimeters, calibrators, signal simulators, crimping tools, lugs, and other panel/instrumentation accessories. - Access and interface with PLC panels, OEM control systems, and field instruments for diagnostics and validation. - Read and work with electrical drawings, P&IDs, and instrument loop diagrams. - Ensure proper documentation and reporting of test results, field observations, and corrective actions. - Adhere to site safety protocols and ensure work is carried out as per industrial standards and quality requirements. Key Requirements: - Education: Degree / Diploma / ITI in Instrumentation, Electrical, or Electronics Engineering. - Experience: 2-6 years of hands-on experience in industrial automation, PLC panel work, and field instrumentation troubleshooting. Technical Skills: - Strong working knowledge of PLC I/O wiring (DI/DO/AI/AO) and communication protocols like Modbus, Ethernet/IP. - Ability to interpret and troubleshoot wiring in OEM panels and custom-built control systems. - Proficiency in using diagnostic and calibration tools such as multimeters, loop calibrators, signal sources, crimping tools, etc. - Experience in instrumentation loop testing, field wiring checks, and electrical safety compliance. Soft Skills: - Strong problem-solving and analytical skills. - Self-motivated and able to work independently in challenging field environments. - Effective communicator with good documentation practices. Additional Requirements: - Willingness to travel and stay onsite for project execution and support as needed. - Must be physically fit and able to work in industrial environments. - Familiarity with safety practices and PPE use in industrial automation setups.,

Role Overview: As an Engineer in the Digital Solutions team at Operation Center, India (INOPC-PG) for Hitachi Energy PowerGrids, you will play a crucial role in optimizing maintenance policies, enhancing equipment availability, and supporting clients globally. Your responsibilities will include configuring Substation models in a cutting-edge Digital platform, collaborating with clients and the R&D team, troubleshooting equipment malfunctions, integrating systems with various protocols, and ensuring compliance with regulations. Key Responsibilities: - Support clients worldwide in optimizing maintenance policies and improving equipment availability. - Configure Substation models in the Digital platform and develop efficient Reliability based maintenance plans. - Act as a liaison between clients and the R&D team, work on delivery projects, and support product releases. - Troubleshoot equipment issues, perform Root Cause Analysis (RCA), and propose solutions to prevent further deterioration. - Integrate systems using protocols like OPC UA, MQTT, Modbus, and Ethernet/IP. - Collaborate with teams to build data pipelines and scalable edge-to-cloud architectures. - Ensure compliance with external and internal regulations, procedures, and guidelines. Qualifications Required: - Bachelor's degree in Electrical & Electronics Engineering. - Minimum of 5 years of experience in Operation and Maintenance of Substations and Power plants with expertise in network communication in RTU and Scada systems. - Self-starter with the ability to take tasks to completion. - Strong attention to detail. - Excellent written and verbal communication skills. (Note: No additional details about the company were provided in the job description),

As a Controls Engineer, your role will involve designing, programming, troubleshooting, maintaining, and updating PLC-based systems using the Codesys development platform. You will need to understand new and changing requirements, analyze existing code, and translate functional requirements into PLC programs. Additionally, you will be responsible for implementing interlocks and safety mechanisms in Electrical and Energy Management Systems. Key Responsibilities: - Hands-on experience in developing applications, integrating systems, testing, and troubleshooting SoftPLC/HMI/DCS using the Codesys development platform. - Proficiency in program development using Structured Text (ST) and ExST under Codesys Automation Server and scripting. - Understanding of standard notations used in electrical systems. - Experience with industrial protocols such as Modbus, Profibus, EthernetIP, and DNP3. - Setting up and integrating with OPC Server and OPC Client. - Exposure to GIT for source code control. Qualifications Required: - BE/B Tech/MCA/M Tech In addition to the technical responsibilities, an ideal candidate for this position should have a minimum of 3+ years of experience. This position is based in Gurgaon/Noida.,

Role Overview: As an Engineer of the Digital Solutions team at Hitachi Energy PowerGrids, you will be a part of the Operation Center in India (INOPC-PG). Your primary goal will be to contribute to the development of a global value chain, facilitating the sharing of key business activities, resources, and expertise across geographic boundaries to enhance value for Hitachi Energy PowerGrids customers worldwide. Key Responsibilities: - Support clients globally in optimizing maintenance policies and increasing equipment availability. - Configure Substation models in the advanced Digital platform and analyze systems to develop efficient Reliability-based maintenance plans. - Serve as a liaison between clients and the R&D team, engage in project deliveries, and aid in product releases for the development team. - Assist clients in troubleshooting, conduct Root Cause Analysis (RCA) for equipment malfunctions, and propose solutions to prevent further deterioration. - Integrate systems with various platforms using protocols like OPC UA, MQTT, Modbus, and Ethernet/IP. - Collaborate with cross-functional teams to establish unified data pipelines and scalable edge-to-cloud architectures. - Ensure compliance with relevant external and internal regulations, procedures, and guidelines. - Uphold Hitachi Energy's core values of safety and integrity by demonstrating accountability for your actions, along with showing care for your colleagues and the business. Qualifications Required: - Holds a degree in B.E in Electrical & Electronics Engineering. - Minimum of 5+ years of experience in Operation and Maintenance of Substations and Power plants with expertise in network communication in RTU and Scada. - Demonstrates self-starter capabilities to take ownership of tasks and drive them to completion. - Possesses strong attention to detail and excellent written and verbal communication skills. (Note: The additional details of the company were not provided in the job description.),

In this role, your responsibilities will include working on Embedded Firmware projects as a member of the Engineering & Design team for new product development, quality improvement, and sustaining engineering. You will collaborate with Lead Engineers and Technical Leads to perform project design and firmware development activities. It will be essential to report and communicate project progress to stakeholders periodically. Additionally, you will coordinate Firmware/software development activities with stakeholders globally and interact with other design team members to meet and optimize product design requirements. You are someone who thrives on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. You excel in developing partnerships and working collaboratively with others to meet shared objectives and deliver customer-centric solutions. To excel in this role, you will need a Bachelor's degree in Electronics/Instrumentation/Telecommunication Engineering and 2-4 years of experience in embedded firmware development. Strong knowledge of 8/16/32-bit Microcontrollers, C, C++ programming languages, and industrial protocols such as I2C, SPI, UART, Modbus, Ethernet, etc., is required. Experience in device driver development for different Microcontrollers, familiarity with IDEs such as KEIL, IAR, Eclipse, and hands-on experience with JTAG debuggers, Emulators, oscilloscopes, function generators, etc., are also necessary. You should have hands-on experience in software test strategy, developing a test automation framework, test environment setup, test planning, monitoring, and test status reporting. Effective verbal and written communication skills and a good understanding of waterfall and agile project development life cycles are essential. Preferred qualifications that set you apart include experience in Industrial Protocols such as HART, Profibus, and Ethernet/IP, GUI Development, integration of various embedded protocol stacks, experience in RTOS-based systems (e.g., UCOS, Threadx), familiarity with Agile and traditional software development lifecycle in a product development environment, and experience with STM32 series microcontroller. At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. Emerson is a global leader in automation technology and software, helping customers in critical industries operate more sustainably while improving productivity, energy security, and reliability. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. If you're looking to make a difference and be part of a dynamic team, consider joining Emerson.,

Responsibilities: Ignition Certification - essential CORE Certification and desirable GOLD Certification The engineer should be able to Designs, program and maintains SCADA/HMI (Human Machine Interface) user interface using Ignition Designer. Should have an expertise in designing and implementing web interface using Ignition Perspective. Should have expertise in scripting in Python within Ignition. Experience in Interfacing with the OPC Server/Client and other external systems. Experience in Tag Historian and report function implementation Integration of Maria db /Influx db with the SCADA backend using SQL Bridge. Backup and Restore operations. Managing alarms, indicators, and alert notification. Integration with email and other messaging services. Should be proficient in program development using Structured Text (ST) and ExST under Codesys Automation Server and scripting. Experience of handling industrial protocols like Modbus, Profibus, EthernetIP, DNP3, etc. Experience in setting up and integration with OPC Server and OPC Client.

You are a skilled PLC Programmer responsible for designing, developing, and maintaining Programmable Logic Controller (PLC) software for industrial automation systems. Your main tasks include programming, troubleshooting, and optimizing automation processes across various machinery and production lines. Your key responsibilities will involve PLC Programming & Development, where you will develop, test, and modify PLC programs for automation systems using platforms like Siemens, Allen-Bradley, Mitsubishi, Omron, or Schneider. You will also be required to configure and integrate Human Machine Interfaces (HMI) and Supervisory Control and Data Acquisition (SCADA) systems. Working closely with electrical engineers, you will design and implement industrial control panels, motor control systems, and communication networks. Your role will also include diagnosing and resolving PLC and automation system issues to minimize downtime and improve efficiency, as well as deploying PLC programs on-site, testing functionality, and providing support during installation and commissioning phases. Additionally, you will prepare detailed technical documentation, ensure safety and compliance with industry standards, and continuously improve automation processes. To qualify for this position, you should have a B.Tech in Electrical, Electronics, Mechatronics, Instrumentation, or related fields with 2-5 years of experience in PLC programming and industrial automation. Your technical skills should include proficiency in Ladder Logic, Structured Text, and Function Block Diagram (FBD) programming, experience with industrial communication protocols like Modbus, Profibus, Ethernet/IP, and CANopen, as well as hands-on experience with VFDs, servo motors, and industrial sensors. Knowledge of robotics, pneumatic, and hydraulic systems in automation is a plus. In terms of soft skills, you should possess strong problem-solving and analytical skills, good communication and teamwork abilities, and the ability to work under pressure and handle multiple projects simultaneously. Preferred industries for this role include Automation Manufacturing Industries. This is a full-time, permanent position with a day shift schedule and in-person work location. As part of the application process, you will be asked questions about your experience in PLC Programming, Automation Industry, Current CTC, and notice period.,

Greetings from Craftsman Automation Limited! Craftsman Automation Limited is currently expanding its Technology Development team and is seeking a dynamic professional to join in maintaining excellence and fostering innovation in Craftsman Storage. We are in search of a Controls Engineer specializing in PLC, VFD, HMI, and SCADA Programming. The job title and designation will be determined based on the candidate's experience and exposure level. The ideal candidate should possess 2 to 10 years of relevant experience and hold a Diploma or Bachelor's degree in electrical engineering, electronics, mechatronics, or a related field. This position falls under the Technology Development Division and is open at locations in Coimbatore, Chennai, and Pune within the Storage system & Warehouse automation industry. As a Controls Engineer at Craftsman Automation Limited, you will be tasked with designing, testing, and implementing control systems that align with customer requirements in the intralogistics and warehouse automation domain. Proficiency in programming Siemens, Allen Bradley, Codesys PLC, drives, and HMI is essential. An added advantage would be experience in warehouse automation, Siemens PLC -STL, FB programming, and SEW drives. The role will also involve traveling to customer sites for design approvals, installations, commissioning, and troubleshooting activities. Key Qualifications: - 2 to 10 years of experience in programming Siemens, Allen Bradley, Codesys, SEW PLC, and Drives. - Familiarity with warehouse automation, Siemens PLC -STL, FB programming, and SEW drives. - Proficiency in testing codes using simulation tools and methodologies with proper documentation. - Strong grasp of PLC programming languages such as Ladder Logic, Function Block Diagram, Structured Text. - Knowledge in HMI/SCADA systems and communication protocols like Ethernet/IP, Profinet, Modbus, OPC UA, S7- Comm, EtherCAT, CAN /S-bus. - Ability to interpret electrical schematics and diagrams effectively. - Sound understanding of electrical and electronics fundamentals. - Excellent problem-solving abilities and keen attention to detail. - Strong communication and interpersonal skills. - Capacity to work both independently and collaboratively within a team. To apply for this position, kindly send your resume to hrd_u3@craftsmanautomation.com with the subject line "Controls Engineer" and include the following details: - Candidate Name: - Current CTC: [Current CTC in LPA] - Expected CTC: [Expected CTC in LPA] - Current Location: - Years of Experience: For more information about Craftsman Automation Limited and its Automated Storage Retrieval System Division, please visit https://www.craftsmanstorage.com/. Join us in revolutionizing the Industrial Pallet Racking & Shelving Systems with our Automated Storage Racks Manufacturers. Apply now to be a part of a team that is shaping the future of warehouse automation and storage solutions at Craftsman Automation Limited! #hiringcontrolsengineer #hiringnow #siemens #siemensprogramming #allenbradley #warehouseautomation #PTC-STL #SEWPLC #PLCprogram #programmer #SCADA #turnkeywarehouseautomation #conveyors #warehouseautomationproducts #electrical #mechatronicsengineer #electronics #hiringcal #craftsmanautomation #storagesystem #craftsmanstoragesystem,

As the Automation Officer at our organization, you will play a crucial role in the design review, implementation, and maintenance of Process Automation Systems (PAS), PLC, and SCADA systems. This will involve working with key components such as Virtualization, Historian, DCS, RIO, OPC-UA, Profinet, and Serial communication. Your responsibilities will include coordinating with vendors to ensure the seamless integration of various equipment with the PAS. Effective communication and collaboration with stakeholders, both external and internal, will be essential to facilitate equipment integration while ensuring that all automation processes align with performance, quality, and regulatory standards. It will be your duty to ensure that all manufacturing activities at FLPL in Hyderabad, India, comply with SOPs, cGMP standards, Ferring Quality requirements, safety, and regulatory expectations. To qualify for this role, you must hold a B.E./B.Tech degree in Instrumentation, Electronics, or a related field and have 0-3 years of experience. You should have a basic knowledge of industrial communication protocols such as Ethernet/IP, Profinet, OPC-UA, and Serial communication. Additionally, good communication skills are required for coordinating with external vendors, particularly in European markets, to facilitate seamless equipment integration with PAS and ensure compliance with technical requirements. Your technical skills should include documentation and reporting, process automation strategy development, technical troubleshooting and support, experience in a relevant GMP facility and regulatory environment, SCADA, HMI system working and/or configuration, operation, PLC, DCS working and/or programming, integration, automated process testing and quality assurance, data monitoring and analysis, regulatory compliance (cGMP, FDA, etc.), and continuous improvement methodologies. You will be responsible for conducting thorough testing and quality assurance to ensure the optimal performance of automated processes. This position is located at Ferring India Laboratories.,

You are seeking a PLC Programmer with expertise in designing, programming, and configuring PLC systems for automation equipment to meet operational requirements. Your responsibilities will include debugging, testing, and validating control logic to ensure performance standards are met. You will collaborate with electrical and mechanical engineers to integrate PLCs into broader control systems, including SCADA and HMI interfaces. Additionally, you will analyze and optimize existing control logic to enhance efficiency, accuracy, and system reliability. Troubleshooting system malfunctions and implementing corrective actions to minimize downtime will be a key aspect of your role. You will also be responsible for developing and executing preventive maintenance schedules and system updates to prevent unplanned outages. Managing system backups, maintaining version control, and implementing safety interlocks to prevent system failures are essential tasks. Creating comprehensive documentation, including wiring diagrams, ladder logic, and I/O configurations, to support ongoing system management and troubleshooting is crucial. Required skills and experience: - A Bachelor's degree in Electrical Engineering, Automation, or a related technical field - Strong proficiency in PLC programming, particularly with Siemens, Allen-Bradley, or Schneider systems - Expertise in programming languages such as ladder logic, structured text, and function block programming - Experience with real-time system debugging, control loop tuning, and signal processing - In-depth understanding of industrial communication protocols (e.g., Modbus, Profibus, Ethernet/IP) - Ability to design and implement complex control architectures involving multiple PLCs, sensors, and actuators - Experience integrating PLCs with robotics, motion control, and advanced HMI systems - Skilled in conducting system risk assessments and applying fail-safe strategies for safety in high-risk operations - Understanding of application security best practices and regulations This is a full-time, permanent position with benefits including cell phone reimbursement and paid sick time. The work schedule is a day shift with fixed hours, and the role requires in-person work at the designated location.,

PLC & HMI Programmer to design and install controller system software for our clients. You will be traveling to clients locations, analysing system requirements, writing and installing custom programmable logic code Required Candidate profile Learning about the Organizational Processes, Standards and Systems Ensuring Timely and Effective Delivery of given tasks and reporting the same to the concerned-on time.

PLC & HMI Programmer to design and install controller system software for our clients. You will be traveling to clients locations, analysing system requirements, writing and installing custom programmable logic code, testing system efficiency Required Candidate profile Adequate Knowledge hands on experience of PLC & HMI Programming. Traveling to clients locations (Local / Interstate) Machine testing as per given criteria. Troubleshooting machine errors.

The Automation Executive is responsible for designing, implementing, and maintaining Process Automation Systems (PAS), PLC, and SCADA systems, along with key components like virtualization, historian, DCS, RIO, OPC-UA, Profinet, and Serial communication systems. Coordination with vendors is essential to ensure seamless integration of equipment with PAS. Effective communication and collaboration with internal and external stakeholders are crucial to facilitate equipment integration while ensuring alignment with performance, quality, and regulatory standards. Compliance with SOPs, cGMP standards, Ferring Quality requirements, Safety, and regulatory expectations for all manufacturing activities at FLPL in Hyderabad, India is mandatory. The ideal candidate should have a B.E./B.Tech in Instrumentation, Electronics, or a related field with 2-5 years of experience. They should possess knowledge in designing, implementing, and managing PAS, SCADA, PLC, DCS, historian, virtualization, and RIO. In-depth understanding of industrial communication protocols like Ethernet/IP, Profinet, OPC-UA, and Serial communication is required for integrating and troubleshooting various devices and systems. Experience in coordinating with external vendors, particularly in European markets, to ensure compliance with technical requirements is necessary. The Automation Executive must be capable of monitoring and analyzing data collected through SCADA systems to assess performance, identify inefficiencies, and implement improvements. They should have a strong grasp of compliance with cGMP, FDA, and other relevant regulatory frameworks within automated systems. Technical skills including documentation, process automation strategy development, technical troubleshooting, support, SCADA, HMI system operation, PLC, DCS programming, automated process testing, data monitoring, regulatory compliance, continuous improvement methodologies, and quality assurance are crucial for this role. Location: Ferring India Laboratories,

You should have a BE/B. Tech qualification in Electrical/Electronic/Computer Science IT programing, with at least 4 to 5 years of experience. The job is located in Makarpura, Vadodara with a salary range of 3.00 to 4.00 Lacs PA. Your responsibilities will include object-oriented Programming, working in Windows and Linux development environments, utilizing Docker/Kubernetes/Swarm, Virtualization, and implementing Event-driven methodology. You should have proficiency in C# programming for HMI integration and networking experience in LAN, WAN, VLAN, Managed Switch, Routers, and various communication protocols such as TCP/IP based Modbus, EthernetIP, Profinet, HTTPS, MQTT. Experience in programming languages like C/C++, Python, and JavaScript will be advantageous. It is essential for you to be able to apply code development and design system/solution architecture effectively. Hands-on knowledge of industrial protocols like Modbus, OPC UA, MQTT, PROFINET, EtherNet/IP, PLC programming, SCADA/DCS, and industrial networking will be required for this role. This is a full-time position that requires in-person work at the specified location.,

You will be joining a dynamic team at Lubi Electronics as a Senior Application Engineer, responsible for leading the deployment of PLC-based machine integration and centralized SCADA systems. Your role will involve designing and implementing automation solutions, ensuring compliance with regulations, and developing enterprise-level reporting systems. You will also be leading a team of Application Engineers, managing tasks, and providing technical support to customers. In this role, your key responsibilities will include: - Leading the architecture, design, and deployment of PLC-based automation systems and centralized SCADA solutions. - Mentoring and managing a team of Application Engineers to ensure timely and high-quality deliverables. - Serving as the primary technical liaison with customers, gathering requirements, presenting technical solutions, and resolving escalations. - Ensuring compliance with 21 CFR Part 11 standards and collaborating with regulatory teams for audit processes. - Designing enterprise-level historian architectures and reporting frameworks to support decision-making. - Assisting in the preparation of project documentation and technical deliverables. - Conducting on-site commissioning, troubleshooting, and training across multiple sites in India. To excel in this role, you should possess the following skills and expertise: - Advanced knowledge of PLC programming, HMI/SCADA development, and field device integration. - Strong experience with industrial protocols such as Modbus, Profibus, Ethernet/IP, and OPC. - Solid understanding of emerging IIoT standards and applications. - Proven leadership skills in coaching junior engineers, conducting performance reviews, and managing teams. - Excellent communication and client-facing skills, including presentations and handling escalations. - Demonstrated expertise in Part 11 validation processes and documentation practices. - Effective project management, multitasking, and risk management capabilities. The ideal candidate for this position should hold a Diploma & BE in Electronics and Communication Engineering or have relevant experience in the field. If you are passionate about driving innovation in automation and contributing to a sustainable future, we encourage you to apply for this exciting opportunity at Lubi Electronics. For more information about our products and services, please visit our website at www.lubielectronics.com or contact us at lubi@lubielectronics.com. We look forward to welcoming you to our team and supporting your professional growth and development.,

CECO Environmental is a global leader in providing sustainable solutions for industrial air, water, and energy transition. Since 1966, we've been addressing the world's most pressing environmental challenges. Our mission is to protect people, the environment, and industrial equipment, making a tangible impact across industries like renewable energy, semiconductor manufacturing, power generation, and water treatment. As a purpose-driven company, we foster a culture of innovation, collaboration, and integrity, ensuring that every project we undertake creates lasting positive change. At CECO, you'll be part of a growing, dynamic team committed to a cleaner, safer, and more sustainable future. As part of the CECO Environmental family of brands, Compass Water Solutions plays a critical role in delivering specialized water solutions that protect both people and the environment. By joining our team, you'll contribute to our shared mission of protecting global industrial operations and shaping the future of environmental stewardship. Your Responsibilities Will Be: - Design, develop, and implement PLC programs for industrial automation systems (e.g., Siemens, Allen-Bradley, Schneider Electric). - Develop Logic Block Diagrams and Function design specification. - Document control system architecture, programming logic, and cybersecurity protocols. - Fill out & Submit cybersecurity-relevant documentation for PLC/DCS systems in the client's specified format. - Troubleshoot and maintain existing PLC systems and HMI/SCADA interfaces. - Collaborate with cross-functional teams to integrate control systems with mechanical and electrical components. - Conduct risk assessments and implement cybersecurity best practices in control systems. - Ensure compliance with industry standards such as IEC 62443. - Monitor and respond to cybersecurity threats in industrial control environments. - Support commissioning and testing of control systems at client sites. Required Qualifications: - Hands-on experience with PLC platforms (e.g., Siemens S7, Rockwell/Allen-Bradley, Mitsubishi). - Solid understanding of industrial network protocols (e.g., Modbus, Profibus, Ethernet/IP). - Awareness of cybersecurity principles and experience applying them in OT environments. - Familiarity with firewalls, VPNs, intrusion detection systems, and secure remote access in industrial settings. - Experience in cybersecurity basic level in the domain of PLC/DCS/ICSS networking. - Experience with SCADA systems and industrial IoT. - Knowledge of safety systems, SIL study & calculation and functional safety standards (e.g., SIL, ISO 13849). - Experience in regulated industries (e.g., industrial water projects & manufacturing). We Offer: At CECO, we are committed to a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers. CECO Environmental is a leading environmentally focused, diversified industrial company whose solutions protect people, the environment, and industrial equipment across the globe, serving a broad landscape of industrial air, industrial water, and energy transition markets.,

The company has an exciting opportunity for a Lead Engineer specializing in Honeywell DCS/Automation Systems in Dubai, UAE. As the Lead Engineer, you will be responsible for leading automation engineering projects related to design, configuration, testing, and commissioning of control systems. The ideal candidate should possess extensive knowledge of Honeywell Experion HS/LX, Plantcruise C300 Controllers, Safety Manager SC, and Controledge, ML200, UOC/HC900. Additionally, the candidate should demonstrate strong leadership skills in project execution and client coordination. Key responsibilities include leading the engineering, configuration, FAT/SAT, and commissioning of Honeywell DCS/SCADA systems. You will be responsible for designing control system architecture, developing control logic, HMI graphics, alarm management, and historian reports. The role also involves coordinating with internal and external stakeholders, providing technical support, and ensuring compliance with safety and quality standards such as SIL, IEC61511, and cyber security. The Lead Engineer will be expected to lead a team of engineers, provide mentoring, task delegation, and progress monitoring. Additionally, the role requires the preparation of detailed project documentation including I/O lists, FDS, DDS, Cause & Effect, and loop diagrams. The candidate should have a Bachelor's degree in Instrumentation, Electronics, Electrical, or a related field, along with a minimum of 8-10 years of automation experience, with at least 5 years in Honeywell DCS/PLC systems. The required skills and qualifications include hands-on experience in Control Builder, HMIWeb, History Database, and Alarm Management. Knowledge of loop testing, function testing, and instrument commissioning is essential, along with familiarity with network protocols such as Modbus, OPC, Ethernet/IP, Profibus, etc. Strong leadership, communication, and team management skills are also vital for this role. If you meet the experience, skills, and education requirements mentioned above, please share your CV for consideration.,

In this role, your responsibilities will include designing and developing hardware for Industrial products to function in harsh industrial environments while meeting environmental and regulatory standards. You will collaborate with specialists in hardware, software, and testing to ensure seamless integration with other components. From concept to deployment, you will be responsible for developing hardware solutions, including design, schematics, and testing to ensure proper functionality. Identifying, analyzing, and optimizing hardware performance will be crucial, along with ensuring that efficient hardware meets performance specifications. Working in an Agile development methodology is also expected. You are someone who tackles challenges with urgency, high energy, and passion, and can relate openly with diverse groups of people. Making timely decisions to keep the organization moving forward is essential for this role. To succeed in this position, you will need experience with 16/32-bit Micro-controllers/Microprocessors, a strong understanding of controller architecture and peripherals, and previous experience in the full product development lifecycle. Power supply design, peripheral interface design (Ethernet/USB/DDR/ADC/SPI/I2C/Display), circuit simulation, signal integrity analysis, and guiding teams in board layout are also required. Experience in DFMEA, analytical and debugging skills, and a willingness to learn new technologies are important. Excellent communication skills for collaboration with multi-functional teams are essential, along with familiarity with communication protocols like HART, Bluetooth, Ethernet/IP, and PROFINET. Preferred qualifications include a Bachelor of Engineering or equivalent experience in Electronics/Electrical Engineering, at least 6 years of hardware development experience, and strong embedded skills. Experience in designing products meeting EMI/EMC requirements for harsh industrial environments, interpreting industry standards, and working in a global engineering environment are advantageous. Additionally, experience with Bluetooth, Ethernet/IP, PROFINET, HART, motor control interfaces, and actuators is beneficial. Emerson prioritizes a workplace where every employee is valued, respected, and empowered to grow. The company fosters innovation, collaboration, and diverse perspectives to drive growth and deliver business results. Offering competitive benefits, medical insurance plans, employee assistance programs, and flexible time off, Emerson ensures employee wellbeing. The company is committed to ongoing career development, inclusivity, and supporting employees to thrive and make a lasting impact. Emerson is a global leader in automation technology and software, helping customers in critical industries operate more sustainably and improve productivity. The company embraces diversity, equity, and challenges, aiming to make a positive impact across various countries and industries. Whether you are an established professional or a recent graduate, Emerson offers opportunities for you to contribute to meaningful work and make a difference.,

As a Lead Engineer specializing in Honeywell DCS/Automation Systems, you will be responsible for overseeing automation engineering projects in Dubai, UAE. Your primary duties will include designing, configuring, testing, and commissioning control systems using Honeywell Experion HS/LX, Plantcruise C300 Controllers, Safety Manager SC, and Controledge, ML200, UOC/HC900. Your expertise is crucial in ensuring successful project execution and effective client coordination. Your key responsibilities will involve leading the engineering, configuration, FAT/SAT, and commissioning of Honeywell DCS/SCADA systems. You will be instrumental in designing control system architecture, developing control logic, HMI graphics, alarm management, and historian reports. Additionally, you will collaborate with internal and external stakeholders, mentor a team of engineers, and oversee project documentation. To excel in this role, you must possess a Bachelor's degree in Instrumentation, Electronics, Electrical, or a related field, along with a minimum of 8-10++ years of automation experience, with at least 5 years focused on Honeywell DCS/PLC systems. Proficiency in Honeywell Experion HS/LX, Plantcruise, C300, SCADA, and ESD/SIS systems is essential. Your hands-on experience with Control Builder, HMIWeb, History Database, and Alarm Management will be advantageous. Furthermore, you should have a strong understanding of loop testing, function testing, and instrument commissioning, as well as familiarity with network protocols such as Modbus, OPC, Ethernet/IP, and Profibus. Effective leadership, communication, and team management skills are crucial for this role. If you meet the aforementioned experience, skills, and education requirements, we encourage you to share your CV to be considered for this exciting opportunity in Dubai, UAE.,

As a skilled and motivated Control & Automation Engineer, you will be responsible for supporting the design, programming, and implementation of automation solutions in industrial and building automation systems. Your technical expertise in PLC programming, SCADA/HMI development, control panel design, component selection, and Building Automation Systems (BAS) will be crucial in delivering efficient and reliable automation solutions. This role will involve hands-on engineering work, system integration, and collaboration with multidisciplinary teams. Your key responsibilities will include developing and implementing automation and control systems, programming and configuring PLCs, SCADA, HMI, and DCS systems, assisting in integrating robotics, vision systems, and smart devices, designing and selecting electrical/electronic components, participating in control panel design, ensuring safety and compliance standards, supporting the installation and commissioning of Building Automation Systems (BAS), troubleshooting control systems and building management systems (BMS), collaborating with other engineers and departments, conducting testing, validation, and documentation of control systems, providing technical support, maintenance planning, and training to relevant teams, and staying updated with emerging technologies and industry trends related to automation and smart systems. Your required skills and qualifications include a Bachelor's degree in Electrical, Electronics, Mechatronics, Instrumentation, Automation Engineering, or a related field, 5 to 10 years of experience in industrial automation, control systems, or building automation, proficiency in PLC programming, SCADA, HMI, and industrial communication protocols, experience in control panel design, familiarity with robotic systems, motion control, and vision systems, understanding of Building Automation Systems (BAS), BMS, HVAC control, and energy efficiency strategies, knowledge of VFDs, servo drives, sensor integration, and PID control, awareness of Industry 4.0, IIoT, and smart building technologies, strong problem-solving abilities, and clear communication skills. Preferred experience includes knowledge of safety standards, CE marking, risk assessments, and functional safety, experience in Special Purpose Machines (SPM), production automation, or material handling systems, and the ability to work independently and within a multidisciplinary engineering team. This is a full-time position located in Thirumudivakkam, Tambaram, with a salary range of 28K to 35K. Food will be provided as a benefit.,

You will be the Digital Manufacturing Engineering Expert responsible for leading transformative Digital initiatives within the Grid Technologies Product business, specifically focusing on Transformers and Switchgears manufacturing. Your role will involve close collaboration with external technology partners, including Consulting companies and Startups, to integrate cutting-edge IT-OT solutions in factory operations. Your expertise in Discrete Manufacturing for Power and Electrical Transmission equipment will be crucial in designing, developing, and implementing scalable applications that leverage cloud technologies and data analytics to enhance operational efficiency and drive business value. Your key responsibilities will include designing and developing cloud-based applications using AWS services, with a focus on AWS IoT SiteWise for real-time data collection and analysis. You will also be tasked with implementing data warehousing solutions using Snowflake to support analytics and reporting, including integration from SAP systems. Collaboration with cross-functional teams to integrate IT and OT systems seamlessly, developing and maintaining SAP applications and interfaces, and troubleshooting application issues in a timely manner will be part of your daily activities. Keeping abreast of emerging technologies and industry trends to drive innovation will also be essential for success in this role. To excel in this position, you must have a Bachelor's degree in computer science, Information Technology, or a related field, with a Master's degree considered a plus. You should possess 8-10 years of application development experience in a manufacturing environment, specializing in Application Development, MES Application Development, SAP, AWS, Snowflake, SQL, and Database Management. Strong knowledge of IIoT concepts and implementation, particularly with AWS IoT SiteWise, as well as experience with SAP development and integration, including migrating data to Snowflake, will be necessary. Proficiency in data visualization tools like Tableau, Power BI, programming languages such as Java, Python, or JavaScript, and familiarity with machine learning concepts and frameworks are also required. Additionally, a deep understanding of Networking and industrial communication protocols (e.g., OPC, Ethernet/IP, MQTT, Modbus), Agile methodologies, DevOps practices, and relevant certifications in technologies or engineering disciplines will be advantageous. A problem-solving mindset, critical thinking ability, and strong inter-personal and communication skills for effective collaboration with internal and external stakeholders are essential qualities for success in this role.,

The company Parle Global Technologies Pvt. Ltd. is looking for a Senior Automation Engineer to join their team in Vasai, Maharashtra. As a Senior Automation Engineer, you will be responsible for PLC programming and SCADA/HMI development for industrial automation systems. Your role will include designing, programming, troubleshooting, and commissioning automation solutions for packaging and process equipment. Key Requirements: - Minimum 6 years of experience in PLC & SCADA systems - Proficiency in Omron, Schneider, Beckhoff, Allen Bradley, or Mitsubishi PLCs - Hands-on experience with SCADA platforms such as Indosoft Aviva, Ecostruxure, and Intouch - Knowledge of industrial communication protocols including PROFIBUS, MODBUS, and Ethernet/IP - Availability to travel for commissioning and customer support - Experience with SQL database, reporting, and SSRS Qualification: - B.E./Diploma in Electrical, Electronics, Instrumentation, or Mechatronics If you meet the above requirements and are interested in this position, please send your resume to career@parleglobal.com.,

As the Project Automation Head for Rockwell at Instrumentation & Control Solutions, you will be responsible for leading and managing Rockwell Automation projects, utilizing platforms such as CompactLogix, ControlLogix, PlantPAx, FactoryTalk View, and RSLogix 5000. Your role will involve developing and implementing project execution plans to ensure adherence to timelines and budgets, designing, programming, and optimizing PLC, SCADA, HMI, and DCS systems, and coordinating with clients, vendors, and internal teams for seamless project execution. In this position, you will support internal teams during Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and system commissioning, while also leading and mentoring a team of automation engineers to ensure effective project delivery. Additionally, you will be responsible for overseeing the operations of the entire automation department, requiring strong leadership skills and the ability to handle multiple projects while maintaining high-quality standards and compliance. The ideal candidate for this role should possess a Bachelor's degree in Instrumentation, Electronics & Communication, Electrical, or a related field, along with at least 12 years of experience in the automation industry. You should have in-depth knowledge and hands-on experience with Rockwell Automation platforms, expertise in PLC, SCADA, HMI, and DCS system programming and troubleshooting, and experience in industries such as Pharmaceuticals, Food & Beverage, Oil & Gas, Chemicals, or Utilities. Familiarity with communication protocols like Ethernet/IP, Modbus, Profibus, etc., as well as strong problem-solving and client communication skills, are essential for this role. In return, we offer a competitive salary as per industry standards, along with benefits such as Provident Fund (PF), Employee State Insurance (ESI), and Health Insurance. You will have the opportunity to work on cutting-edge industrial automation projects in a full-time capacity. If you are passionate about driving automation excellence and meet the above criteria, we encourage you to apply for this position by contacting us via email at ankur.tiwari@ics-india.co.in or phone at 9109188512. Join our team at Instrumentation & Control Solutions and be a part of our innovative approach to automation and instrumentation! Apply now and showcase your expertise in Rockwell Automation to contribute to our success.,

As a Controls Automation Engineer with Visa (US B1/B2 or H1B) at our Bangalore location, you will be responsible for creating machine programs for Control Systems, predominantly Allen Bradley, based on clients" requirements. Your role will involve providing documentation and testing support throughout the clients" lifecycle development model. Additionally, you will offer commissioning support for machines, which may require approximately 15% to 20% travel per year. To excel in this position, you should possess at least 5 years of experience with Industrial Automation Control Systems, particularly Allen Bradley Control System including Studio5000, FTView SE software, CompactLogix, ControlLogix, and Guard Logix Processors. Proficiency in reading control design schematics is essential, as well as hands-on experience in Testing, Commissioning, and Documentation support. Holding a US B1/B2 or H1B Visa is a mandatory requirement for this role. Ideally, you should also have exposure to MS Visio, VMWare, MS Access, RSNetworx, FT View backend VBA scripting, Excel VBA coding, troubleshooting field instruments, Networking for OT layer, Ring topology, and Ethernet/IP, ControlNet, Modbus TCP/IP protocols. Familiarity with configuring Rockwell Historian ME Module and managed switches, SIL Programming, Electrical Traction system, hydrostatic system, engine, generators, dust control systems, and hydraulic/Pneumatic circuits would be advantageous. In addition to technical skills, fluency in English, excellent presentation skills, and exceptional time management and prioritization abilities are crucial for delivering timely client responses. Strong communication and interpersonal skills are essential for developing and maintaining client relationships effectively. This position falls under the Digital Product Engineering (H&I) category, offering you the opportunity to work in a dynamic and innovative environment. If you are a dedicated Controls Automation Engineer with a passion for industrial automation and a track record of delivering high-quality solutions, we encourage you to apply and become a valuable member of our team.,

The OT/ICS Engineer will be leading the setup, commissioning, and operational management of the Cyber-Physical Systems (CPS) lab with a focus on SCADA, PLC, and Industrial Control Systems (ICS). Your responsibilities will include designing and implementing the architecture for the lab setup, deploying industrial control hardware, integrating SCADA software platforms, ensuring operational readiness, monitoring system health, and conducting routine maintenance tasks. You will also be responsible for implementing industrial cybersecurity best practices, conducting security audits, configuring intrusion detection systems, and maintaining documentation related to lab infrastructure. Supporting students, researchers, and external teams in utilizing the lab for projects and simulations will also be part of your role. To be eligible for this position, you should have a B.Tech/B.E. or M.Tech in Electrical, Electronics, Instrumentation, Industrial Automation, or a related field, along with 3+ years of hands-on experience with ICS/SCADA systems. Proficiency in working with PLCs, knowledge of industrial protocols, and experience in OT networking and cybersecurity basics are required. Desired qualifications include exposure to cybersecurity frameworks for OT, experience in setting up CPS testbeds or simulation platforms, and certifications like GICSP, ISA/IEC 62443, or CCNA Industrial. Personal attributes such as strong problem-solving skills, good documentation and communication skills, and the ability to work independently and in interdisciplinary teams are also important. Occasional travel across the country may be required for project execution and coordination with geographically distributed teams. To apply for this position, please submit a cover letter summarizing your relevant experience, along with a resume and the latest passport-size photograph.,