59 Esp32 Jobs

As an IOT Developer at BOTBERRY SOLUTIONS, you will be responsible for the following: - Embedded software development/maintenance in Esp32, NodeMCU, Ardunio and Raspberry pi etc. - Working on latest communication technologies such as LORA, BLE, Zigbee etc. - Integration with MQTT & IOT Cloud platforms - Circuit schematic drawing and basic PCB designing - Understanding the components from datasheets and selection of best components for the PCB designing Qualifications required for the role include: - B.E / B.Tech in CSE / ECE / EEE - 1+ yrs of experience in Embedded systems software development - Strong programming skills in MicroPython, C/C++ in Linux - Basic knowledge in Networking and communications - Desirable to have knowledge and exposure in Mobile App development - Basic knowledge of hardware design & troubleshooting - Hands on experience with interfacing various on-chip and off-chip peripherals like LCD displays, keypads, UART, SPI, I2C, ADC, timers, interrupts, GPIO etc. - Experience in Firmware testing, debugging, documentation & troubleshooting of the C code on the target hardware - Motivated and desire to learn new technologies - Good problem-solving skills - Must be able to work independently or in a group & take up big responsibilities If you believe you possess the above-mentioned attributes and are eager to contribute in our dynamic work environment, please send your resumes to careers@botberrysolutions.com.,

As an Embedded Software Engineer at our company, you will play a crucial role in designing, developing, and debugging embedded firmware for microcontrollers like STM32, ESP32, and similar platforms. You will have the opportunity to interface with hardware components such as sensors, actuators, and communication modules, and work closely with the hardware team for board bring-up, debugging, and testing. Your responsibilities will also include developing and maintaining documentation for design, development, and testing processes, as well as conducting unit testing, validation, and system-level testing. Key Responsibilities: - Design, develop, and debug embedded firmware for microcontrollers like STM32, ESP32, and similar platforms. - Interface with hardware components such as sensors, actuators, and communication modules (UART, SPI, I2C, CAN, etc.). - Work closely with the hardware team for board bring-up, debugging, and testing. - Develop and maintain documentation for design, development, and testing processes. - Conduct unit testing, validation, and system-level testing. Qualification Required: - B.Tech in Electronics & Communication Required Skills: - Proficient in C/C++ for embedded systems. - Hands-on experience with STM32, ESP8266/ESP32, or similar microcontrollers. - Familiarity with RTOS (FreeRTOS or similar). - Experience with firmware-over-the-air (FOTA) updates is a plus. - Understanding of power management in embedded devices. If you are interested in joining our team, please share your updated resume with us at careers@skilancer.com or contact us at 7683052276. Please note that this is a full-time position at our location in Faridabad. We offer Provident Fund benefits as part of our employment package.,

Role Overview: As an Embedded Systems Engineer with 13 years of experience at Majik Medical Solutions in Hyderabad, you will be responsible for designing, building, and testing embedded hardware and firmware for next-gen medical devices. You will work on custom PCBs, low-power sensor nodes, device firmware (C/C++), and connectivity (BLE/Wi-Fi), collaborating closely with mechanical, QA/RA, and product teams. Key Responsibilities: - Design electronics: Capture schematics, size components, and lay out 2-6 layer PCBs with a focus on high-speed & mixed-signal basics, power domains, grounding, and EMI/ESD practices. - Develop firmware: Write and debug C/C++ for MCUs such as STM32/ESP32/nRF52, create drivers for sensors/actuators, manage FreeRTOS tasks, implement power management, and develop simple bootloaders/OTA. - Implement connectivity/IoT: Set up BLE GATT, Wi-Fi + MQTT/HTTP, ensure basic security with TLS and keys, and establish data protocols for device-to-app/cloud communication. - Conduct bring-up & testing: Utilize oscilloscope, logic analyzer, DMM, and power analyzer for board verification, write test firmware, and compile validation reports. - Handle prototyping tasks: Perform rework/soldering (0402/SOIC/QFN), conduct lab builds, wire fixtures, and provide DFM/DFT notes for vendors (FAB/assembly). - Manage documentation: Create BOMs, revision notes, test plans, risk logs, and maintain issue trackers using Git/Jira. - Ensure quality & safety: Adhere to basic IEC 60601/EMC practices in design, support verification records for ISO 13485 workflows, and collaborate with app/cloud teams and mechanical teams on APIs and design decisions. - Collaborate with app/cloud teams on APIs and with mechanical teams on enclosure/thermal/connector decisions. Qualifications Required: - Hands-on PCB experience using KiCad or Altium with at least one board designed and tested end-to-end. - Proficiency in C/C++ programming on microcontrollers, experience with STM32/ESP32 or similar, and familiarity with FreeRTOS. - Comfort with lab equipment such as oscilloscope, logic analyzer, and debugging firmware/hardware interactions. - Basic analog skills including op-amp interfaces, sensor signal conditioning, ADC/DAC usage, filters, and buck/linear regulators. - Exposure to BLE/Wi-Fi stacks and serial protocols (IC, SPI, UART, CAN). - Strong documentation habits, version control using Git. Additional Company Details: Majik Medical Solutions is a company that specializes in building next-gen medical devices, from health monitors to specialty generator systems. They combine custom electronics, firmware, and cloud connectivity to create real hardware that improves patient care. Join their dynamic and collaborative work environment with opportunities for professional development and career advancement. Note: Cell phone reimbursement, health insurance, and Provident Fund benefits are provided. This is a full-time position based in Hyderabad.,

You will be responsible for the following tasks: - Developing working prototypes using sensor modules and microcontrollers such as Arduino, ESP32, etc. - Designing and assembling circuits for signal acquisition and processing - Interfacing sensors with IoT platforms, gesture control systems, and smart applications - Assisting in testing, calibration, and performance optimization of prototypes The company is India's number one not-for-profit private university with a global presence and a strong foundation in research and innovation.,

You should have a minimum of 4+ years of experience in embedded C & C++ development. It is essential to possess good knowledge and practical experience in working with Real-Time Operating Systems (RTOS) such as Free RTOS or Zephyr RTOS. You should also have exposure to and be familiar with debugging code in an RTOS-based environment. Additionally, it is crucial to have a strong background in working with RTOS-based Micro-Controllers and be well-versed in various communication protocols like Modbus, Ethernet, BACnet, and REST in embedded systems. Proficiency in Bluetooth Low Energy (BLE), BLE Mesh, and BLE GATT server is a must. Experience with microcontrollers such as STM32, Nordic, and ESP32 would be an added advantage. Moreover, having knowledge and experience in working with custom bootloaders and firmware upgrade (Firmware Upgrade Service - FUS) is highly beneficial. Familiarity with dual cores and software versioning tools like SVN/GIT is preferred. You should have hands-on experience in control & interface board bring-up and a strong understanding of IOT cadence. Good knowledge of GCC compilers, especially on VS Code IDE, and experience in writing make files for building are considered advantageous for this role.,

This position focuses on launching direct-to-consumer products. You will be responsible for designing, prototyping, and launching Portable Energy Systems compact solutions that integrate core technologies to deliver IoT-enabled backup power for consumers. We are seeking a motivated individual who thrives in a fast-paced environment and can collaborate closely with the team to develop and deliver innovative solutions. Your responsibilities will include developing, maintaining, and optimizing Bitbucket Pipelines configurations to automate build, test, and deployment processes. You will also work on developing board level and system level embedded software for solar and battery-based portable products. Collaboration with hardware and system engineers to conceptualize and document design architecture for implementation will be a key aspect of your role. Additionally, you will be involved in firmware EVT testing once the design code is ready and working with DVT engineers to test and troubleshoot prototype designs. As the ideal candidate for this role, you should have a BE/M.Tech/MS degree in Electrical Engineering, Computer Engineering, or Computer Science. You should possess 5+ years of experience with a BE or 3+ years of experience with an MS in a similar (non-academic) role as an embedded software or firmware engineer. Proficiency in scripting language Python for automating software development workflows is required, along with expertise in C for real-time applications. Experience with both bare metal and real-time operating systems (RTOS) is essential. Your ability to troubleshoot firmware-related issues within complex systems, test code and hardware with or without external test equipment, and familiarity with software development processes, Atlassian cloud suite, and Git configuration management will be valuable assets. Familiarity with development tools such as GCC, GDB, Eclipse, and GNU Make is desired. You should be capable of carrying a design task from concept to implementation, verifying it, documenting engineering requirements, documenting solutions, and testing new firmware designs. Familiarity with ARM Cortex-M4/7, STM32, or similar microcontroller architectures, FreeRTOS, Zephyr development experience, and developing embedded firmware for power electronics-based products are all advantageous. Experience with AC grid simulators, solar panel simulators, Battery Management Systems (BMS), and ESP32 or similar radio modules for Wi-Fi/Bluetooth is a plus for this role.,

This is a full-time IoT Developer role located in the Mohali district. As an IoT Developer, you will be responsible for software development, programming, and working with technologies like Internet of Things (IoT) and Raspberry Pi to create innovative IoT solutions on-site. You should have experience with Arduino, Raspberry Pi, ESP32, or STM32 along with knowledge of programming languages such as C, C++, Python, or Embedded C. Additionally, you should be able to interface sensors, motors, and communication modules like WiFi, Bluetooth, LoRa, etc. Experience with IoT platforms such as AWS IoT, Google Firebase, or ThingsBoard will be beneficial. In terms of Mobile App Development, proficiency in Android using Java/Kotlin and Android Studio, iOS with Swift and Xcode, as well as Cross-platform development with Flutter (Dart) or React Native is required. API development skills using Node.js, Python (Flask/Django), or Firebase will be an added advantage. A problem-solving mindset and creativity are essential for this role. You should be adept at troubleshooting and coming up with innovative solutions while working on inventions. Qualifications for this position include expertise in Internet of Things (IoT) and Software Development, strong programming skills, experience with Inductive Output Tube (IoT) and Raspberry Pi, and excellent problem-solving and analytical abilities. Moreover, good communication and teamwork skills are necessary. A Bachelor's degree in BTech ESE with specialization in embedded system and IoT is preferred.,

Were hiring an Embedded Systems Developer with expertise in Embedded C, data structures, and hardware programming. Experience with Sigfox, LoRa, STM32, ESP32, and TI MSP430 is a strong plus.

Job Title: Robotics - Trainer / Educator Location: Hyderabad & Pune Job Type: Full-time Job Description: We are seeking an experienced and highly motivated individual to join our team as a Curriculum Planner. In this role, you will be responsible for implementing a comprehensive robotics curriculum. Key Responsibilities: Collaborate with teachers to ensure the learning objectives and goals for the robotics curriculum are met. Implement the curriculum in a physical classroom setting, you may be required to teach sessions and conduct hands-on activities. Assess student progress and provide feedback to support their learning and development. Identify learners who excel in the subject and train students to participate in robotics competitions Research and develop bots using the most suitable materials Train the teachers to ensure the right concepts are being taught in the classroom. Requirements: Bachelor's/ Masters degree in engineering Minimum of 2 years of experience in teaching robotics. Proficiency in a variety of programming languages Should have a good knowledge of Arduino & ESP32 with IOT Strong communication and organizational skills. Ability to change their teaching methodology as per student needs and learning styles.

As a highly skilled Hardware & Firmware Expert with experience in embedded systems and IoT applications, you will be responsible for developing hardware design and firmware for MCUs such as STM32, ESP32, and Nordic nRF series. Your expertise in IoT communication protocols like WiFi, BLE, LoRa, and other LPWAN technologies will be crucial in implementing and integrating these protocols. Additionally, you will work with RTOS-based firmware, optimize tasks for real-time execution, and develop and debug peripheral interfaces including UART, I2C, SPI, ADC, PWM, GPIOs, and DMA. You will also play a key role in implementing and managing OTA firmware upgrades, secure boot mechanisms, writing efficient device drivers, integrating third-party libraries and SDKs, and working with low-power design techniques for battery-operated devices. Your experience in developing firmware using frameworks like Arduino, STM32 HAL/LL, ESP-IDF, and Nordic SDK, and debugging firmware using tools like JTAG, SWD, Logic Analyzers, and Oscilloscopes will be essential for this role. Collaboration with hardware, software, and cloud teams for seamless IoT integration will also be part of your responsibilities. To be successful in this role, you should have 4+ years of experience in firmware development for embedded systems, strong hands-on experience with STM32, ESP32, and Nordic MCUs, proficiency in C/C++ programming for embedded systems, and familiarity with RTOS such as FreeRTOS and Zephyr. Experience with wireless communication protocols, Arduino framework, ESP-IDF, Nordic SDKs, peripheral interfaces, OTA firmware updates, debugging tools, low-power design techniques, and security protocols for embedded IoT devices will be highly valued. Preferred qualifications include experience with AI/ML on edge devices (TinyML), custom bootloaders, secure firmware updates, and knowledge of scripting languages like Python for debugging and automation. In return, you can expect a competitive salary based on experience, a flexible work environment, and the opportunity to work on cutting-edge IoT and embedded projects with learning and growth opportunities in firmware development & IoT solutions. If you are passionate about embedded systems and IoT firmware development, we look forward to hearing from you!,

We are seeking a highly motivated Robotics Trainer who possesses a strong technical background in robotics and coding, along with the capability to drive business development initiatives. Your primary responsibilities will include educating and training K-12 students in robotics and coding, developing engaging STEM curriculum, and organizing robotics demonstrations and workshops nationwide. The ideal candidate will exhibit a deep passion for education, hands-on learning, and possess a robust business acumen to support the growth of the company, establish client connections, and represent the organization at various events and demonstrations. In the realm of Robotics Training & Instruction, you will be tasked with delivering hands-on robotics and coding instruction to K-12 students, designing and implementing compelling STEM curriculum, and guiding students through the process of constructing and programming robots. Additionally, you will prepare students for robotics competitions, nurture creativity, critical thinking, and problem-solving skills among students. Your role will also involve Business Development & Client Engagement, where you will be expected to identify new business opportunities and market needs for robotics training solutions. You will conduct demonstrations and presentations for potential clients, travel nationally to establish and oversee ATL setups in educational institutions, collaborate with internal teams for seamless execution of workshops and training sessions, and cultivate relationships with schools, educational bodies, and business partners to promote the company's services. In Curriculum Development & Technical Support, you will be responsible for creating, updating, and assessing robotics and coding curriculum to align with students" evolving needs. Staying abreast of the latest advancements in robotics, AI/ML, and coding platforms will be essential, along with providing technical support for various robotics platforms and developing students" skills in programming languages. Moreover, as part of Event Representation & Marketing, you will represent the company at educational events, conferences, and trade shows to expand the company's network. Conducting market research, competitor analysis, contributing to marketing efforts, and enhancing brand awareness will also be crucial aspects of your role. The Required Skills & Qualifications for this position include a Bachelor's degree in a relevant field, minimum 1 year of teaching experience in robotics or coding, proficiency in coding platforms, hands-on experience with robotics platforms, knowledge of 3D design and printing, proficiency in programming languages, and strong communication and troubleshooting skills. Additionally, personal qualities such as self-motivation, adaptability, organizational skills, and a willingness to travel are highly valued. If you are enthusiastic about teaching, possess a strong technical background, and are eager to contribute to both educational and business development aspects, we encourage you to apply for this exciting opportunity.,

You will be responsible for designing, developing, and testing analogue and digital hardware circuits for industrial control products. Your role will involve utilizing your strong foundation in electronics, a problem-solving mindset, and experience in designing microcontroller-based systems. Your key responsibilities will include designing and developing analogue/digital electronic circuits and schematics for industrial control applications. You will be developing hardware using platforms such as STM32, ESP32, and similar microcontrollers. Additionally, interfacing with sensors, displays, and I/O devices using communication protocols like I2C, SPI, and UART will be part of your tasks. You will also collaborate with PCB fabrication and assembly vendors to create PCB layouts, and test, debug, and validate prototypes for functional and environmental compliance. Supporting firmware engineers in hardware-software integration and system testing will also be expected from you. Furthermore, documenting hardware design specifications, bill of materials (BOMs), and revision histories to ensure the quality, reliability, and manufacturability of the hardware designs will be crucial. Staying updated with emerging technologies in embedded and IoT hardware is also a part of the role. Qualifications required for this position include a B.E. / B.Tech / M.Sc. / M.Tech degree in Electronics, Instrumentation, or a related field. To be successful in this role, you should have a minimum of 3 years of relevant experience in embedded hardware design and development. Strong hands-on knowledge of circuit design, sensor interfaces, and microcontroller-based systems is necessary. Experience with STM32 / ESP32 platforms is mandatory. Skills required for this role include a strong understanding of circuit design and electronic components, proficiency in schematic and PCB design tools, and hands-on experience with STM32 / ESP32-based hardware. Working knowledge of communication protocols like I2C, SPI, UART, and interfacing displays (TFT/LCD), analogue/digital sensors, and I/O modules is essential. Familiarity with IoT hardware architecture and communication modules like Wi-Fi, BLE, RS-485, etc., and competence in using laboratory equipment including oscilloscopes, multimeters, and signal generators will also be beneficial. This position is located in Dahisar (East), Mumbai and is an on-site role.,

We are looking for a Senior Electronics Hardware Engineer in our team. In this role, you are expected to have hands-on experience in hardware design and development of digital and analogue electronics, analogue and mixed domain circuits solutions. As a core member of the Electronics system design team, you will drive microprocessors/ microcontrollers, SoC-based processing unit design and peripheral interface control, power electronics for power supply, power distribution, battery charging management, and embedded systems bring-up, integration, and qualification. Core Responsibilities: Design and develop new hardware platforms for multiple projects. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. Ability to make sense of complex functional requirements and build appropriate electronics hardware-based solutions. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills: Must to have: 6 to 8 years of experience in low-power circuit design, system bring-up, engineering-build integration, and debugging performance issues in the integrated product. 4 to 8 years of experience driving design development from component selection, schematic capture, PCB layout, assembly, and integration with other modules of the product. 5+ years of experience in the development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. Experience in embedded Linux-based SOCs design along with microcontrollers. Experience in power supply topologies: DC-DC, Flyback Converters, LDOs, etc. Experience of battery charger design, signal conditioning, sensor interface; protection circuits. Hands-on experience in hardware implementation of embedded system data communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE. Experience of BDC/ BLDC or stepper motors, motor driver circuit design, and its working principles. Diverse experience in microcontroller/ microprocessor-based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. Ability to interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc., on a PCBA level. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have: Strong communication and documentation skills and ability to operate independently. Experience with portable, battery-operated designs and power budgeting. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies. Experience with RTOS. Experience with ESP32 and ESP-IDF. Experience of Microphone and Speaker circuit design is a plus. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. Hands-on experience of the manufacturing process including DFM and DFT for consumer products at scale. Familiar with sensor interface, MIPI Camera CSI and DSI; display Modules and their communication protocols applications; Power Supply design and distribution for low power applications, motor drive control design, Pwm, DMA control, and Audio signal Processing interface. Job Types: Full-time, Permanent, Fresher Benefits: Health insurance, Paid sick time, Paid time off, Provident Fund Schedule: Fixed shift, Monday to Friday Application Question(s): Which project have you worked on that has a microcontroller and sensor instrumentation What was your role and responsibility in that project What exposure do you have in schematics design and PCB development tools Have you participated in Requirement Specification creation and drafting Work Location: In person,

Are you an experienced Embedded Systems & IoT enthusiast eager to take on the challenge of building cutting-edge wireless communication and AI-driven embedded products Do you have the vision to lead technology development from the ground up and drive the future of connected devices and intelligent embedded solutions ChipIoT Embedded Solutions India Pvt Ltd is looking for a Co-Founder & CTO to join as a core team member and take ownership of the technology roadmap, driving innovation and execution in the IoT, embedded AI, and wireless communication domains. ChipIoT is an emerging embedded solutions company working on next-gen IoT, wireless, and AI-driven embedded systems. Our portfolio includes LAN-to-WiFi bridges, LoRa-based communication systems, audio devices, and AI-powered embedded solutions for industrial and healthcare applications. We are now expanding to AI-driven embedded intelligence, and we need a technical leader to spearhead this growth. We are seeking a tech visionary passionate about building innovative embedded and IoT products who can provide hands-on leadership as "Engineer #1" to architect and build the MVP. The ideal candidate should have strong expertise in embedded firmware, hardware design, and AI-driven embedded systems, along with experience in wireless communication technologies such as LoRa, Bluetooth, WiFi, Zigbee, etc. Proficiency in C, C++, Python, Embedded Linux, RTOS, ESP32, STM32, Raspberry Pi, or similar platforms is required. Familiarity with AI/ML in embedded systems, sensor fusion, edge computing, and low-power optimization is a plus. The candidate should also have the ability to integrate hardware and cloud platforms via MQTT, REST APIs, or WebSockets, as well as experience in leading a tech team, architecting scalable solutions, and making key technology decisions. As a Co-Founder & CTO at ChipIoT, you will have the opportunity to shape the company's technology vision, product roadmap, and growth strategy. This equity-based role initially offers future financial compensation as the company scales. The position is based in Pune, with flexibility to suit work-life balance, and provides ownership & autonomy over technical architecture, design, and execution. You will work on deep-tech IoT solutions with real-world applications, shaping the future of embedded intelligence and IoT-driven AI solutions in India. Join us to work on groundbreaking projects in AI-powered edge devices, wireless communication, and embedded IoT platforms, gain hands-on experience in scaling an innovative startup, build and lead a strong technical team from the ground up, and receive equity ownership in a fast-growing deep-tech company. If you're a passionate technologist eager to make an impact, let's build the future together! If you are interested, please email us at anurag@chipiotembedded.com or apply here.,

Design and develop embedded software for microcontrollers, PLCs, or industrial processors. Write firmware to control devices like motors, sensors, actuators, and displays. Work with RTOS or bare-metal systems.

You will join our team as an enthusiastic IoT Trainer to educate learners on the Internet of Things. The ideal candidate should have hands-on experience working with IoT hardware and cloud integrations, along with a passion for teaching. Your responsibilities will include delivering interactive sessions on IoT concepts and applications, providing hands-on training with sensors, microcontrollers (ESP8266/ESP32), and protocols like MQTT, developing IoT projects and real-world simulations, as well as assisting learners in troubleshooting and debugging. This is a contract position with a day shift schedule from Monday to Friday. The work location will be in person.,

You have a fantastic opportunity to join our team as an IoT Solutions Developer with a minimum of 2 years of experience. This full-time position is based in Trivandrum. As an IoT Solutions Developer, your primary responsibilities will include creating and developing automation programs, researching, testing, and documenting IoT solutions, and resolving network and platform connectivity issues. You will also be tasked with analyzing user needs, designing cloud-compatible platform solutions, and developing IoT applications for connected devices. To excel in this role, you must possess an in-depth understanding of Python programming, experience with micro Python, knowledge of SNMP, TCP/IP, and MQTT protocol, as well as proficiency in IoT sensors. Additionally, familiarity with ESP32, ESP8266, and Jetson boards, along with experience in custom-build firmware, is highly desirable. You should be well-versed in programming languages such as Embedded-C, Embedded C++, JavaScript, and Python, and have a solid grasp of IoT architecture. The ideal candidate will be a team player with strong communication, analytical, and problem-solving skills. This role requires working collaboratively with others and a willingness to adapt to a fast-paced environment. In return, we offer a comprehensive benefits package including health insurance and provident fund. The position involves a day shift schedule with the potential for performance bonuses. If you have at least 1 year of experience with ESP32 and ESP8266 and are willing to relocate to Trivandrum, Kerala, we encourage you to apply. This is an in-person position that requires reliable commuting or relocation prior to starting work. Join us and be part of a dynamic team driving innovation in IoT solutions.,

Are you passionate about hands-on tech education and shaping young minds through real-world innovation eduCOBOT is looking for a dynamic STEM Curriculum Designer & Trainer to build and deliver a progressive learning journey for school students from basic electronics and breadboarding to advanced projects using ESP32, IoT, and AI/ML. As a STEM Curriculum Designer & Trainer at eduCOBOT, your responsibilities will include designing grade-wise STEM learning pathways covering electronics fundamentals such as breadboard, LEDs, and sensors, Arduino-based coding and logic, IoT with ESP32, cloud/mobile integration, and AI/ML projects using beginner-friendly tools like Teachable Machine. You will also be tasked with developing project kits, lesson plans, diagrams, and coding guides, as well as facilitating hands-on student workshops and training school teachers. Additionally, you will have the opportunity to mentor learners in real-world applications of coding, robotics, and innovation. To qualify for this role, you should possess a degree in Electronics, Computer Science, Engineering, or STEM Education. Practical experience with Arduino, ESP32, IoT platforms like Blynk, ThingSpeak, Firebase, familiarity with block-based (Blockly) and text-based (C++, MicroPython) coding, and comfort with AI/ML education tools such as Google Teachable Machine or Edge Impulse are essential requirements. Excellent classroom and communication skills are also highly valued. If you have experience in school/STEM curriculum design and exposure to 3D printing, Raspberry Pi, or PCB design, it would be considered a bonus. Joining eduCOBOT means being part of a mission-driven team that blends coding, robotics, and AI into a future-focused platform where students not only learn but also create, innovate, and build the future. You will play a key role in redefining how education intersects with technology and contribute to shaping the minds of young learners in a dynamic and innovative environment.,

We are seeking passionate and innovative IoT & Embedded Systems Developers to join our team and contribute to the development of next-generation automation and security solutions. Ideal candidates for this position include experienced Engineers in IoT & Embedded Systems as well as Freshers with a strong foundation, self-learning capabilities, and a keen interest in developing new projects. As an IoT & Embedded Systems Developer, your responsibilities will include designing and developing IoT devices and embedded solutions, working with microcontrollers, sensors, and various communication protocols, implementing IoT communication such as MQTT, LoRa, Zigbee, Modbus, etc., integrating devices with Cloud platforms like AWS, Azure, and Google IoT, collaborating on R&D projects, and creating prototypes. The required skills for this role encompass expertise in Embedded C, C++, Python, and Node.js, familiarity with microcontrollers such as ESP32, ARM, STM32, Arduino, and Raspberry Pi, basic PCB design knowledge and hardware understanding, understanding of IoT protocols and device-cloud integration, as well as possessing curiosity, a problem-solving mindset, and the ability to adapt to new technologies. This position is available in various job types including Full-time, Permanent, Fresher, Internship, Freelance, and Volunteer. Additionally, the benefits offered include cell phone reimbursement, health insurance, paid sick time, and the flexibility to work from home. If you meet the qualifications and are excited about the prospect of working in a dynamic environment focused on IoT and Embedded Systems development, we encourage you to apply and become a valuable member of our team.,

About the job: Key responsibilities: 1. Take full ownership of transforming concepts into working prototypes. 2. Work closely with designers and management to understand ideas and requirements. 3. Coordinate with fabricators, welders, carpenters, and lathe machine operators to build hardware setups. 4. Source materials, assemble components, and integrate electronic systems. 5. Package and deliver the first functional prototype. 6. Consult with owners and staff, take inputs, and refine the prototype into a consumer-ready product. 7. Ensure timely delivery and high-quality output. Who can apply: Only those candidates can apply who: are Computer Science Engineering students Salary: ₹ 2,20,000 - 3,00,000 /year Experience: 0 year(s) Deadline: 2025-09-21 23:59:59 Other perks: Informal dress code Skills required: Raspberry Pi, Arduino, 3D Printing, Prototyping and ESP32 Other Requirements: A doer and problem-solver who takes responsibility end-to-end. Background in Electronics / Electrical / Mechatronics (Diploma or ITI preferred). Knowledge of electronics circuits, sensors, and controllers. Familiarity with fabrication processes and working with workshops. Strong interest in VR/AR gaming, simulations, and interactive projects. Prior experience in gaming projects, robotics, or hardware prototyping is a big plus. Highly motivated, resourceful, and enthusiastic about building new experiences. About Company: Virtual reality, augmented reality. It's the future of everything you believe in. From education to entertainment, we are the ones. Education using augmented reality, specially designed for kids of 2-6 years

Position:Associate Embedded Systems Trainer Location: Ramachandrapuram, Andhra Pradesh, India Employment Type: Full-time (Traineeship leading to confirmed role) Number of Roles Open : 2 About the Role: We are inviting fresh graduates and postgraduates who are passionate about Embedded Systems to kick-start their careers as Associate Embedded Systems Trainers . This role is designed to help you transition from a learner to a mentor, through structured training, guided teaching practice, real-time project exposure , and interactions with automotive industry leaders from around the globe . If you enjoy Embedded C, microcontrollers, and guiding others , this opportunity is for you. Salary & Growth Path: First 6 months: 10,000/month (training period with mentoring & shadow sessions) Next 6 months: 20,000/month (on successful performance & eligibility evaluation) Post completion (12 months): Eligible for confirmation as Embedded Systems Trainer with revised salary & career growth opportunities Key Responsibilities: Undergo a train-the-trainer program covering Embedded Systems, Microcontrollers, and IoT. Shadow senior trainers (Industry professionals) during live classes and gradually conduct independent sessions. Assist in preparing course content, lab manuals, and project documentation . Support learners with coding, debugging, and embedded projects. Work on real-time embedded projects to gain practical expertise. Collaborate and learn from automotive industry experts worldwide through workshops, guest lectures, and industry sessions. Stay updated with the latest trends in embedded & automotive domains . Required Skills & Competencies: Strong foundation in C programming and microcontroller basics . Familiarity with: Arduino, ESP32, ARM-based controllers NXP microcontroller chipsets Communication protocols ( UART, SPI, I2C, CAN, LIN ) Good communication, problem-solving, and presentation skills. Passion for teaching, mentoring, and continuous learning. Eligibility: Fresh graduates & postgraduates (B.E./B.Tech/M.E./M.Tech/M.Sc. in Electronics, Electrical, Instrumentation, Computer Science, IT, or related fields). 01 year of experience (academic projects, internships acceptable). Strong interest in Embedded Systems and career in training/mentorship . What We Offer: Structured career path from associate ? trainer ? senior trainer/SME(Subject Matter Expert) . Hands-on experience with industry-standard kits, ESP32 boards, and NXP automotive-grade controllers . Opportunity to work on real-time embedded& Automotiveprojects . Direct exposure to and mentorship from global automotive industry leaders . Platform to become an industry-recognised Embedded Systems Engineer and excel in Automotive Embedded Systems Industry. To apply: Share your latest Resume to [HIDDEN TEXT] Show more Show less

Job description IoT Developer Experience: 2+ Years Location: Hyderabad. Work Mode: Work From Office Objectives of this role: Lead the IoT Revolution: Join us as an IoT Developer and lead the revolution in connected devices and smart solutions leveraging WiFi, CSI , mmWave and ML. Empower Everyday Life: Your work will empower everyday life, making it smarter, more efficient, and more connected. Invent Tomorrow: Be part of a team that invents tomorrow's IoT solutions today, driving industries forward. Challenge the Status Quo: Join us to challenge the status quo and redefine how the world connects and communicates. Endless Opportunities: As an IoT Developer here, you'll find endless opportunities to innovate and create. Responsibilities Design and develop IoT applications and solutions for connected devices using WiFI, BLE. Implement IoT protocols and communication standards, ensuring seamless data exchange. Collaborate with hardware engineers to integrate sensors and devices into IoT ecosystems. Stay current with IoT technologies and industry trends. Contribute to the development of innovative IoT projects to meet client needs. Required skills and qualifications: Five or more years of experience as engineer of IoT and Software solutions. Experience in building firmware solutions using using ESP32/Raspberry Pi/Arduino. Five or more years of experience with embedded Linux, C++, Python, Digital Signal Processing (DSP) Proven ability to document design processes, including development, testing, analytics, and troubleshooting Experience with rapid development cycles in a web-based environment Strong ability in scripting and test automation Desire to continue professional growth through training and education Preferred skills and qualifications Bachelor's degree in Electronics/Communications or related field. Proficiency in IoT protocols and communication standards like WiFi, Channel State Information (CSI), mmWave (millimeter wave) signals etc. Experience with hardware integration and building firmware applications. Knowledge of IoT security practices. Development and maintenance of IoT platforms. Troubleshooting and monitoring IoT deployments. Staying current with IoT technologies. Innovative problem-solving. Collaborative mindset.

Job description IoT Developer Experience: 2+ Years Location: Hyderabad. Work Mode: Work From Office Objectives of this role: Lead the IoT Revolution: Join us as an IoT Developer and lead the revolution in connected devices and smart solutions leveraging WiFi, CSI , mmWave and ML. Empower Everyday Life: Your work will empower everyday life, making it smarter, more efficient, and more connected. Invent Tomorrow: Be part of a team that invents tomorrow's IoT solutions today, driving industries forward. Challenge the Status Quo: Join us to challenge the status quo and redefine how the world connects and communicates. Endless Opportunities: As an IoT Developer here, you'll find endless opportunities to innovate and create. Responsibilities Design and develop IoT applications and solutions for connected devices using WiFI, BLE. Implement IoT protocols and communication standards, ensuring seamless data exchange. Collaborate with hardware engineers to integrate sensors and devices into IoT ecosystems. Stay current with IoT technologies and industry trends. Contribute to the development of innovative IoT projects to meet client needs. Required skills and qualifications: Five or more years of experience as engineer of IoT and Software solutions. Experience in building firmware solutions using using ESP32/Raspberry Pi/Arduino. Five or more years of experience with embedded Linux, C++, Python, Digital Signal Processing (DSP) Proven ability to document design processes, including development, testing, analytics, and troubleshooting Experience with rapid development cycles in a web-based environment Strong ability in scripting and test automation Desire to continue professional growth through training and education Preferred skills and qualifications Bachelor's degree in Electronics/Communications or related field. Proficiency in IoT protocols and communication standards like WiFi, Channel State Information (CSI), mmWave (millimeter wave) signals etc. Experience with hardware integration and building firmware applications. Knowledge of IoT security practices. Development and maintenance of IoT platforms. Troubleshooting and monitoring IoT deployments. Staying current with IoT technologies. Innovative problem-solving. Collaborative mindset.

The IoT Firmware Intern position at AriveGuru Technology Solutions Pvt. Ltd in Bengaluru is offering a paid internship opportunity for a duration of 6 months on a full-time basis, from Monday to Friday. The stipend for this internship is 12,000 per month, and a certification will be provided upon successful completion. Exceptional performance during the internship may lead to a full-time employment opportunity. As an IoT Firmware Intern, you will have the chance to work on real-world IoT solutions and gain practical experience in developing and testing firmware for IoT hardware across live industrial applications. We are looking for highly motivated final-year students or recent graduates in Electronics, Electrical, or related fields who are passionate about embedded systems and firmware development for microcontrollers, communication protocols, and real-time systems. To be eligible for this internship, you must be based in Bengaluru and able to work on-site full-time for 6 months with a minimum CGPA of 8.0+. Face-to-face interviews are mandatory, and candidates should have a strong interest in embedded C/C++, RTOS concepts, microcontrollers like ESP32, STM32, Arduino, Raspberry Pi, communication protocols such as UART, I2C, SPI, MQTT, HTTP, Modbus, as well as IoT concepts and tools like VS Code, Arduino IDE, PlatformIO, STM32CubeIDE. Key responsibilities include designing, developing, and debugging firmware for microcontrollers, testing communication protocols, integrating sensor data acquisition, collaborating with hardware engineers, conducting real-time debugging, participating in IoT architecture design, optimizing code for performance, and maintaining clean documentation. In addition to technical skills, soft skills such as analytical mindset, attention to technical details, collaboration with electronics teams, self-driven attitude, eagerness to learn, adaptability, good written documentation and version control practices, and effective communication in cross-functional teams are essential for this role. By joining this internship, you will gain practical experience in firmware development, exposure to industrial IoT applications, mentorship from senior embedded developers and hardware designers, and a certificate of completion. There is also a potential for a full-time job offer based on performance. AriveGuru Technology Solutions Pvt. Ltd is located at 139, 1st Floor, Sarvabhouma Nagara, MSRS Nagara, Next to IIM Bangalore, Bilekahalli, Bengaluru, Karnataka 560076. This internship is available on-site only, and the expected start date is 27/07/2025.,

We are seeking a skilled Embedded Systems & Robotics Engineer who possesses expertise in embedded software development and robotic hardware wiring. The ideal candidate will demonstrate proficiency in Arduino, ESP32, STM32, and Raspberry Pi Pico, along with experience in Linux-based embedded platforms and knowledge of motor control systems and sensor interfacing. This role is tailored for individuals who are enthusiastic about constructing and troubleshooting robotic platforms from scratch, showcasing competence in both electronics hardware and low-level software domains. Responsibilities: - Design, develop, and debug embedded firmware using C, Embedded C, Python, and Arduino C. - Engage with microcontrollers such as Arduino, ESP32, STM32, Raspberry Pi Pico, and embedded platforms like Raspberry Pi and Jetson Nano. - Execute industrial/robotic panel wiring, incorporating sensors, motors, and power electronics. - Create and validate motor control solutions for DC, stepper, and servo systems. - Establish connections with analog and digital sensors via I2C, SPI, UART communication protocols. - Implement code deployment and system management on Linux OS for RPi/Jetson-based control units. - Interpret and produce schematics and PCBs, contribute to board bring-up and hardware testing. - Optional but beneficial: Work on OpenCV-based computer vision, perception, or robotic alignment tasks. - Collaborate with mechanical and software teams throughout the robot development process. Preferred Qualifications: - Familiarity with Jetson Nano, camera modules, or robot navigation software. - Knowledge of MicroPython. - Basic understanding of OpenCV or image processing tools. - Exposure to robot design lifecycle or mechatronics integration projects. Job Types: Full-time, Fresher Schedule: Fixed shift Ability to commute/relocate: Dombivli, Maharashtra: Reliable commuting or willingness to relocate with an employer-provided relocation package (Preferred) Education: Bachelor's degree (Preferred) Work Location: In person For further inquiries, please contact the employer at +91 8169196916.,