729 Equipment Jobs - Page 3

1) Ensure the availability of machines equipment in right condition to meet the production requirements in SMD, PC, ASSLY 2) Carry out the PM of Machines as per checklist for trouble free operation of machine tools 3) Update Work Order after completion of breakdown 4) Implementation and support for TQM, ACME Other Projects Responsibilities Accountabilities Receiving the work request and creation of work orders based on work request. Execution of Mechanical breakdown in the areas of FRS, Rings Arranging material for Breakdown / PM from stores / fabricate parts and replacing the same for rectification. Attending the machine breakdown along with service engineer if necessary. Trial run of the machine after rectification / PM and handing over the machine for production Preparation of drawing for fabrication of parts inhouse Carry out PM of machines as per checklist. Take corrective and preventive actions. Carry out geometrical test as per machine test chart as and when required. Co-ordinate provide support for reconditioning / retrofitting of machines Co-ordinate provide support during new machine installation and layout change Update Work Order with details of work carried out resources, complete the Work Order after completion of breakdown Co ordinating with Mfg for implementation of TQM, ACME Other Projects

1. Ensure 100% availability of machines with 100% adherence to the Preventive Maintenance Schedules Responsibilities Accountabilities Performing the activities as per the given preventive checklists. Monitoring the moving parts on daily basis for signs of excessive wear , defects damage. Lubrication of machines Adhere Basic 5S and keeping the work place, tools, spares clean Disposing of waste materials, oils, waste, etc as per ISO standards. Attending the Machine Break downs both electrical and mechanical Servicing of Equipments(Ex,Motors,Pneumatic cylinders,Hoists,Belt conveyors,Gears) Adhering to preventive maintenance schedule CLIR checklist Adhering the safety norms,work permits and to wear appropriate PPEs at workplace Identification and rectification of Near miss and unsafe condition Create and closing of work orders for respective shift maintenance activities Providing details of spares requirement to reporting person Attending Preventive and breakdown maintenance in EOT cranes , Forklift trucks and pallet trucks

1. Ensure 100% supply of Reclaimed and Newsand To all production Centres With out shortage. 2. Ensure quality and on time delivery to molding line 3. Adhering to TQM, ACME, GreenCo, QMS and OHSMS Standards 4. Continual improvement" Responsibilities Accountabilities Ensure Zero line stopper Due to Excess sand in Silos ,With Sand balancing. Collect all sand ,Dust and Thermal gas consumption datas On daily basis and it should be updated. Daily monitor if any Leakages of sand ,water and Dust in Pipe line, IT should be corrected Immediatly with help of TPM Identify if any Unsafe work and unsafe act in our department ITshould be highlited and corrceted With help of concern department Ensure Shop floor in Clean condition. Training for Newly joined CL In all Machines (Sand drier,Thermal,G20 and C9 craneoperation.) Maintaining ISO9001-2015,EOHS/EMS Records and monitoring calibaration of equipment.

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips- the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world- like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of"science and engineering to make possible"the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers."We empower our team to push the boundaries of what is possible"”while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Experience 4-5 years Key responsibilities will include: Creates and sustains OMSs for existing products Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies. Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products. Job Specific Knowledge: Requires demonstrated knowledge of manufacturing engineering discipline, theories, practices and principles. Requires knowledge necessary to perform the job function such as an understanding of the engineering change order process, DFx (Design for Excellence) engineering principles, product development process, value engineering, engineering specification waiver process, Producibility / manufacturability analysis, product structure, bill of materials, product safety requirements, material handling, and root cause analysis. Skills: Requires strong skills in Product technology, problem solving, communication skills, customer orientation, personal effectiveness, team skills, and quality. In depth knowledge of CAD tools ( UGNX , Creo, Creo Illustrate, Team center & CORE+ ), Familiar with SAP to study product and its disposition status & ECO is a must Requires additional knowledge of systems and software necessary such as Outlook, MS Word, Excel, PowerPoint Functional Knowledge Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities Business Expertise Understands key business drivers; uses this understanding to accomplish own work Leadership No supervisory responsibilities but provides informal guidance to team members Problem Solving Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents Impact Impacts quality of own work and the work of others on the team; works within guidelines and policies Interpersonal Skills Explains complex information to others in straightforward situations Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips- the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world- like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of"science and engineering to make possible"the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers."We empower our team to push the boundaries of what is possible"”while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Key Responsibilities Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies. Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products. Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality. Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities. Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions. Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented. Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required. Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development. Other : This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required. Functional Knowledge Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities Business Expertise Understands key business drivers; uses this understanding to accomplish own work Leadership No supervisory responsibilities but provides informal guidance to new team members Problem Solving Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents Impact Impacts quality of own work and the work of others on the team; works within guidelines and policies Interpersonal Skills Explains complex information to others in straightforward situations Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 20% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines. Duties and Responsibilities Works under general supervision to complete HVAC BIM design projects. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Directs project support and production for assigned projects, creating drawings as required using standards and content to meet job requirements (objects within the drawing, doors, lights, etc.). Develops and maintains HVAC system models, including ductwork, piping, and equipment layouts. Coordinates with other disciplines (structural, electrical, plumbing) to ensure proper integration of HVAC systems within the overall building model. Performs clash detection and resolution using software such as Navisworks to identify and resolve conflicts between building systems. Generates accurate quantity take-offs and schedules from BIM models to support cost estimation and procurement processes. Participates in project meetings to discuss design progress, challenges, and solutions with the project team and stakeholders. Ensures compliance with building codes, energy efficiency standards, and project specifications in HVAC system designs. Maintains and updates BIM content libraries specific to HVAC components and systems. Collaborates with engineers and architects to optimize HVAC system performance and energy efficiency through iterative design processes. Prepares and presents design options and recommendations to project managers and clients. Stays current with industry trends, new technologies, and best practices in HVAC BIM design and implementation. Qualifications Minimum : Bachelor's degree in Mechanical Engineering, Architectural Engineering, or related field + 2 years of relevant experience, or demonstrated equivalency of experience and/or education Proficiency in Revit, AutoCAD, and Navisworks Strong understanding of HVAC systems and building codes Experience with 3D modeling and BIM workflows Excellent problem-solving and analytical skills Preferred Qualifications: 3+ years of experience in HVAC design using BIM software Advanced knowledge of Revit MEP and its HVAC-specific features Familiarity with energy modeling and analysis tools Experience with Revizto, Microstation, or other BIM collaboration platforms LEED Accredited Professional certification Knowledge of sustainable design principles and energy-efficient HVAC systems Strong communication skills and ability to work effectively in a team environment Experience with clash detection and resolution in multi-discipline projects Familiarity with industry standards such as ASHRAE and SMACNA Ability to mentor junior designers and contribute to BIM standards development

Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Title : Senior Mechanical Engineer (HVAC/MVAC/P&D for Water/Wastewater/Desalination) 5 to 10 Years of experience in wastewater/water industry. Awareness of pipe network design codes Experience in designing various mechanical components of wastewater treatment systems like ASP, MBBR, SBR, MBR, Digesters, Solids Handling systems, etc. Experience in designing Water Treatment systems including conventional and advance system (e.g., desalination systems). Experience leading the team on various design tasks/deliverables like- Developing the design of Wastewater Treatment Plants (including Sludge Treatment facilities and Odour Control facilities) and Water and Wastewater Networks. Water and wastewater mechanical equipment sizing and selectionScreens, Mixers, Conveyors, Sludge Thickeners and Centrifuges, Chemical dosing systems, etc. Preparing hydraulic calculations for pressurized/gravity systems. Pump and fan sizing/selection. Valve selection (including penstocks). Pipe sizing and material selection. Developing concept design, detail design, tender, and construction documentation in accordance with both, schedule, and budget. Preparing and reviewing design documents e.g., calculations, datasheets, specifications, pipe, and valve schedules. Supervision of 3d modeling and 2d drawing preparation. Good understanding of P&IDs and PFDs. Multidiscipline coordination. Undertake liaison with internal clients/customers/vendors to develop business relationships. Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Mechanical Engineering field from a recognized university. Professional registration or licensure in their designated home office country or be in active pursuit of such registration.

Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

5 - 10 Years of experience in wastewater/water industry. Design (Concept, FEED and Detail Design) of Electrical Distribution Systems for - Low Voltage, High Voltage Electrical system Working knowledge of water and wastewater treatment process and related engineering works-Pumping Stations, Desalination etc Prepare Design Basis, Load list, Cable schedule, Interconnection Schedule, Single Line Diagrams, schematics, Bulk MTO. Perform Equipment sizing calculations e.g. Transformer, Generator, HV/LV Cables, AC UPS, Capacitor Banks Perform indoor Lighting, outdoor area Illumination and Street Illumination in Dialux or vendor software, calculations for Earthing and Lightning Protection. Hands on experience of System Studies software like ETAP/SKM/Amtech Experience in modeling electrical system and carry out load flow, short circuit, motor starting, protection relay setting studies Qualifications B.E./M.Tech. (preferred) in ElectricalEngineering field from a recognized university. Professional registration or licensure in their designated home office country or be in active pursuit of such registration.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Minimum Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Healthcare design experience required Overall 13+ years of work experience is preferred.

Title : Senior Mechanical Engineer (HVAC/MVAC/P&D for Water/Wastewater/Desalination) Awareness of pipe network design codes Experience in designing various mechanical components of wastewater treatment systems like ASP, MBBR, SBR, MBR, Digesters, Solids Handling systems, etc. Experience in designing Water Treatment systems including conventional and advance system (e.g., desalination systems). Experience leading the team on various design tasks/deliverables like- Developing the design of Wastewater Treatment Plants (including Sludge Treatment facilities and Odour Control facilities) and Water and Wastewater Networks. Water and wastewater mechanical equipment sizing and selectionScreens, Mixers, Conveyors, Sludge Thickeners and Centrifuges, Chemical dosing systems, etc. Preparing hydraulic calculations for pressurized/gravity systems. Pump and fan sizing/selection. Valve selection (including penstocks). Pipe sizing and material selection. Developing concept design, detail design, tender, and construction documentation in accordance with both, schedule, and budget. Preparing and reviewing design documents e.g., calculations, datasheets, specifications, pipe, and valve schedules. Supervision of 3d modeling and 2d drawing preparation. Good understanding of P&IDs and PFDs. Multidiscipline coordination. Undertake liaison with internal clients/customers/vendors to develop business relationships. Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Mechanical Engineering field from a recognized university. Professional registration or licensure in their designated home office country or be in active pursuit of such registration. 5 to 10 Years of experience in wastewater/water industry.

Design and develop instrumentation systems for water, wastewater, and desalination projects using Revit and/or Plant 3D software. Create and modify technical drawings and models based on verbal and visual instructions from project managers and engineers. Manage work-sets and control visibility in Revit and/or Plant 3D models to ensure efficient collaboration with team members. Utilize various parameters in Revit and/or Plant 3D families and schedules to optimize design processes. Integrate specifications into models using Revit and/or Plant 3D, ensuring compliance with project requirements. Collaborate with multidisciplinary teams to coordinate instrumentation designs with other engineering disciplines. Perform quality control checks on instrumentation designs and drawings to maintain high standards of accuracy. Assist in the development of instrumentation design standards and best practices for the organization. Provide technical support and mentorship to junior designers and drafters. Participate in client meetings to present instrumentation designs and address technical queries. Stay updated on the latest trends and technologies in water, wastewater, and desalination instrumentation systems. Contribute to the preparation of project proposals and cost estimates for instrumentation components. Troubleshoot and resolve design-related issues during project execution phases. Ensure all designs comply with relevant industry standards, codes, and regulations. Assist in the development of equipment specifications and procurement documents for instrumentation systems. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 7 - 10 Years of experience in wastewater/water industry. Working Experience using Revit and/or Plant 3D and AutoCAD for water market-related designs. Drafting course from a recognised institute. Working experience using REVIT, AutoCAD and Microstation. Professional registration in their designated home office country or be in active pursuit of such registration. Demonstrated proficiency in instrumentation design for water, wastewater, and desalination projects. Strong knowledge of industry standards and regulations related to water and wastewater instrumentation. Experience with project management and coordination in multidisciplinary teams. Excellent communication and presentation skills for client interactions. Familiarity with equipment specifications and procurement processes for instrumentation systems. Ability to mentor junior designers and contribute to team development. Strong problem-solving skills and attention to detail.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Qualifications Minimum Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Overall 7+ years of work experience is preferred.

The successful candidate will be responsible for assisting their Senior Engineer- Instrumentation tasks/deliverables to support water, wastewater, desalination, and Biosolids treatment facilities such as. Evaluate and develop alternative control system solutions that meet client requirements. Develop design reports, specifications, plans, and associated client deliverables for the I&C and SCADA systems. Specify instruments, controllers, computers, servers, ancillary equipment and components, and application software. Assist in defining interface requirements for process valves, adjustable frequency drives, and packaged systems. Develop new and modify existing application programming in PLCs (programmable logic controllers), HMIs (human machine interfaces) and associated components. Participate in consulting, design, construction, planning, commissioning/start-up, training, and close-out phase activities. Create documentation for application software. Work with and Coordinate SCADA system requirements with other disciplines including civil, structural, architectural, process mechanical, HVAC, plumbing, and electrical during the design phase. Interact with clients to gain an understanding of their systems. Work with contractors, and sub-contractors to resolve issues during, construction and commissioning/start-up Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Instrumentation & Control from a recognized university. Professional registration or licensure in their designated home office country or be inactive pursuit of such registration. Awareness of Quality aspects (i.e., registers, design issues logs, QC process, design transmittals, etc.). Able to independently work efficiently and meet required deadlines by following relevant design manuals/standards and practices 6+ Years of experience in the water/wastewater industry Good English communication skills. Good team player

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

In this role you will be responsible for: The coder reads the documentation to understand the patient's diagnoses assigned - Transforming of healthcare diagnosis, procedures, medical services, and equipment into universal medical alphanumeric codes - Creating uniform vocabulary for describing the causes of injury, illness & death is the role of medical coders - Medical coding allows for Uniform documentation between medical facilities - The main task of a medical coders is to review clinical statements and assign standard codes of the role include: - 0 -1 Year of experience in any Healthcare BPO - University degree or equivalent that required 3+ years of formal studies in Life science/BPT/Pharm/Nursing - Good knowledge in human Anatomy/Physiology - 1+ year(s) of experience using a computer with Windows PC applications that required you to use a keyboard, navigate screens, and learn new software tools - Ability to work scheduled shifts from Monday-Friday 7:30 AM to 5:30 PM IST and the shift timings can be changed as per client requirements. Flexibility to accommodate overtime and work on weekend"™s basis business requirement. Ability to communicate (oral/written) effectively in English to exchange information with our client. Must be a CPC-A Certified and working from office mandatory

Req ID: 314003 We are currently seeking a Enterprise Resource Planning Advisor to join our team in Bangalore, Karntaka (IN-KA), India (IN). Sr. SAP SD CS consultant with HANA experience. Consultant needs to work in 6am to 4pm or 12pm to 10pm & 3.30pm to 1.30am shift needs to have a good communication skill. Needs to have 6+ yrs of experience in implementation & Support of SAP SD and CS module with HANA Experience. Should be able to work on SLA's, should have experience to handle multiple clients and ability to sync with different clients and different process simultaneously. At least 6 years of SAP SD and CS experience with 3 years in Support; Strong knowledge and experience in in house repairs, field service repairs Good knowledge and experience in Service notifications, Service orders, Warranties , Contracts, Repair orders, DIP profile, Equipment and serial numbers In depth knowledge of After Market business processes including Service, Warranty processing and Dealer Management Extensive knowledge of replacement processing including scrap and refurbishment processing. Concepts of Notifications & Service Order Configurations are must. Drive Functional and technical discussions with the client project & Business team during discovery/design sessions. Proficient understanding of SD developments, customizations including Reports, Smart forms, Custom Z transactions, and processing. Strong SAP technical, configuration, and business area knowledge in SD module. Sound SAP SD skills like Pricing / Credit Management / Rebates / Consignment/ Batch Management/ Sales Order / Sales Return / STO Configuration / Warranty Concepts / Deliveries and Billing. Equipment master setup, Serialization, tracking, and integration with warranty tracking and coordination with SD MM and FI modules for reporting of warranty recognition. Knowledge of service labour posting and integration. Self-starter with the ability to acquire new skills autonomously and identify problems and opportunities for improvements within SD modules. Must be capable of working flexible hours sometimes under pressure of aggressive deadlines. Ability to collaborate with other team members working remotely from various locations. Ability to work on Customer-specific integrated applications to SAP. Must have a strong technical foundation and strong problem-solving skills. Ability to research and resolve issues. S/4 Hana exposure on customer management preferably. Proficient understanding of SAP technologies and applications.

""¢ The coder reads the documentation to understand the patient's diagnoses assigned "¢ Transforming of healthcare diagnosis, procedures, medical services, and equipment into universal medical alphanumeric codes "¢ Creating uniform vocabulary for describing the causes of injury, illness & death is the role of medical coders "¢ Medical coding allows for Uniform documentation between medical facilities "¢ The main task of a medical coders is to review clinical statements and assign standard Codes"

SUMMARY JOB DESCRIPTION: Engineer will be responsible for providing high-quality technical support and maintenance services to our clients. Engineer will troubleshoot and resolve issues with equipment, perform regular maintenance, and ensure customer satisfaction through effective communication and problem - solving skills. Requirements Mechanical and Electrical Knowledge. Troubleshooting Skills.

Job Summary We are looking for a detail-oriented engineering team member to coordinate preventive maintenance schedules, manage breakdown records, and ensure adherence to SOPs, critical for maintaining operational efficiency and equipment reliability. This role plays a pivotal part in inventory control, and CAPA closure, contributing to seamless production operations, compliance with regulatory standards, and effective resource utilization. Roles & Responsibilities • You will be responsible for coordinating with cross functional teams for ensuring that preventive maintenance is carried out as per schedules in SAP. • Your role involves preparing the PMP (Preventive Maintenance Plan) and maintaining the necessary records of breakdowns and maintenance activities in the PMP as per defined frequency. • Your responsibilities include handling of external contractors and agencies, reviewing and ensuring implementation of the instructions (Work Instructions and SOPs – Standard Operating Procedures) related to production operation. • You will train and assist the team members during troubleshoot and breakdown of machines and commissioning of new Equipment. • You will ensure balance investigation and inventory control for all instrument spares parts. • Your role involves planning, consolidating and submitting the maintenance budget for the allotted area/unit. • You will ensure that the maintenance expense is within the budgeted amount. • You will be responsible for ensuring availability of all process equipment and regular maintenance of all process equipment spares by following up with OEMs (Original Equipment Manufacturers), external vendors and SCM (Supply Chain Management). • You will be accountable for enduring closure and completion all assigned CAPA (Corrective and Preventive Actions) on time. • You will be expected to support any technical/documentation activities at site as per instructions from Section Head. • You will be responsible for preparing, updating, and maintaining all necessary documents for audits like SOPs, formats, PM (Preventive Maintenance) books, protocols, and Machine History Books for the respective areas. • Your responsibilities include facility upkeep of respective areas as per GMP (Good Manufacturing Practices) and cGMP (Current GMP). • You will be accountable for ensuring implementation of Good Engineering Practices (GEP) at Site. Qualification Edu : Diploma in Electrical & Instrumentation Engineering or B. Tech in Electrical & Instrumentation Engineering. Responsible for coordinating and executing project development and handover activities of in-house projects in the plant In house Project Works and coordination with vendors during projects execution. Following all related SOPs, PMPs & OI's and ensuring concurrent Documentation. Maintenance & Machining of parts as per requirement. Closing of Change Controls, Job proposals, Quality, Non-Quality Impacting reports and cross checks Guiding and controlling external vendors working inside plant and arranging required material as per technical details required for work completion. Preparation of Engineering Provisions and drawings/layouts. Preparation of commissioning reports for new equipment, Instrument and submissions to Asset Team. Coordinating with CFTs for timely project execution. Training the user department and ensuring regular operation of systems implemented. Coordination with service providers during installations, commissioning and execution of qualification activities, breakdowns of systems & equipment. Technical evaluation of changes in the validated systems or processes. Responsible for addressing the deviations in external/internal audit observation in engineering processes, practices followed. Execution, Review, Installation & Commissioning of new equipment along with related documentation like DQ, IQ, OQ, PQ and related SOPs. Responsible for initiation, review of deviation management through incidents relevant to the in-house projects and incident investigation related to engineering. To Review of SOP's and OI's, coordination with QA and follow relevant SOPs. To follow the quality procedures and regulatory requirements. Monitoring of maintenance systems in SAP Responsible for planning of preventive maintenance Operation and Maintenance of pure steam generators. Responsible for taking the Periodic GXP Computerized system backup and submitting to IT department. Technical support to carry out the GxP assessment & controls for manufacturing machines. Good knowledge on PLC Programming. Additional Information About the Department Global Manufacturing Organisation (GMO) At Dr. Reddy's Laboratories, we are dedicated to making a meaningful impact on global healthcare through precision manufacturing and innovation. With a legacy of excellence, we are a leading force in the pharmaceutical industry. We operate 19 state-of-the-art manufacturing plants across Hyderabad, Vizag, Baddi, Mexico, Shreveport, and Mirfield, comprising 8 OSD facilities, 3 Injectables facilities, and 8 API facilities. Benchmarking manufacturing processes and continuous operational excellence are at the core of our capability to deliver quality medicines to our patients in 66 countries. We manufacture a portfolio of complex APIs and 1,150+ drug master files across key therapy areas such as Oncology, Cardio-vascular, Central Nervous System and Anti-Diabetes. he World Economic Forum has recognised our largest manufacturing facility in Bachupally, Hyderabad, as part of its Global Lighthouse Network. We aspire to be the most efficient pharma operations in the world. Our productivity improvement and digitalisation efforts are key to staying competitive, meeting business imperatives, and meeting our ambitious ESG goals. Building such ‘factories of the future’ is integral to innovation and to build healthcare of the future. Benefits Offered At Dr. Reddy’s we actively help to catalyse your career growth and professional development through personalised learning programs. The benefits you will enjoy at Dr. Reddy’s are on par with the best industry standards. They include, among other things and other essential equipment, joining & relocation support, family support (Maternity & Paternity benefits), learning and development opportunities, medical coverage for yourself and your family, life coverage for yourself. Our Work Culture Ask any employee at Dr. Reddy’s why they come to work every day and they’ll say, because Good Health Can’t Wait. This is our credo as well as the guiding principle behind all our actions. We see healthcare solutions not only as scientific formulations, but as a means to help patients lead healthier lives, and we’re always attuned to the new and the next to empower people to stay fit. And to do this, we foster a culture of empathy and dynamism. People are at the core of our journey over the last few decades. They have been supported by an enabling environment that buoys individual ability while fostering teamwork and shared success. We believe that when people with diverse skills are bound together by a common purpose and value system, they can make magic. For more details, please visit our career website at https://careers.drreddys.com/#!/

Responsibilities: * Manage production schedule & resources effectively * Ensure quality control standards met * Oversee equipment maintenance & safety protocols * Collaborate with cross-functional teams on projects Free meal Cafeteria Accidental insurance Annual bonus Leave encashment Gratuity Provident fund

Job Description of Security Supervisor Job Introduction Roles Responsibilities As a professionally trained Security Supervisor for G4S, you could be a member of the security team responsible for securing premises, such as building sites, courts, shops, warehouses, banks and factories. You would be conducting foot or vehicle patrols, controlling access at points of entry, securing equipment and people, responding to emergency situations, monitoring CCTV, surveillance operative and helping to identify and prevent criminal activity. Protect premises, property, and informationReporting daily to Supervisor with all daily reports as per proceduresEnsuring all Policies and Procedures are adhered to at all timesAll Health, Safety, and Environment instructions are to be adhered to at all timesOperating and monitoring security systemsControl the entry and exit of individuals, materials, and vehiclesPatrol on foot searching for any situations or conditions hazardous to the property or safety of a person at a sitePatrol all outside parking areas as required to ensure vehicle safety and to detect an unauthorized personWrite appropriate reports as required Benefits and Advantages of Joining G4S Career growthG4S standard uniform Job training and consistent upskillingSalary on the 7th of every month27 annual leavesAnnual Bonus of max 1-month salaryGratuity (after 5 years of service)Accidental insurance up to INR 3 lakhsEPF 12% from employer and 12% from EmployeeESI Health Coverage for self & familyPension applicable after 10 years continues services (Retirement age 58 years)In case of death during the services, pension applicable of nominee and 2 children till 25 years age and INR 75k ex-gratia and INR 3,62000- EDLI benefits Ideal Candidate Minimum Education qualifications is 12th PassMinimum Height 5 feet and 7 inches (5’ 7”) Age between 25 to 45 and more than 5 years Security ExperiencePhysically and Medically fit and look like mature

Aster Medcity is looking for Technician to join our dynamic team and embark on a rewarding career journey. Conducting electrocardiogram (EKG), phonocardiogram, echocardiogram, and stress tests by using electronic equipment. Ensuring cardiology patients are comfortable by answering any questions they have about the tests. Recording the results of cardiological tests and consulting with the physician on duty to schedule any follow-up tests. Assisting physicians during non-evasive cardiological procedures by monitoring the patients' heart rates and alerting the physicians to any readings outside normal ranges. Maintaining cardiological equipment and supplies with daily cleanings and adjustments. Recording supply inventory levels and restocking the supply storeroom accordingly. Troubleshooting problems with cardiological equipment and reporting any malfunctions to superiors. Staying up-to-date with cardiological developments by attending conferences and participating in research projects