1463 Emc Jobs - Page 14

Job Description: Embedded Systems Lead – Drones, UGVs & Robotics Location: Hyderabad (On-site) Function: R&D | Embedded Systems Reports to: VP - R&D / CTO Role Overview We are looking for a seasoned and hands-on Embedded Systems Lead to architect, develop, and optimize the embedded platforms driving our UAVs, UGVs, and autonomous robotics systems. This role is critical to advancing capabilities in battery optimization, obstacle avoidance, and navigation autonomy, ensuring high-reliability embedded solutions in dynamic and rugged environments. Key Responsibilities Embedded Systems Architecture & Development: Architect and develop embedded solutions for UAVs, UGVs, and robotics, with a focus on autonomy and reliability. Design and optimize firmware for microcontrollers, sensor interfacing, and real-time processing. Battery Systems & Power Optimization Collaborate with electronics and battery teams to implement and optimize Battery Management Systems (BMS) for high-efficiency power usage. Optimize energy consumption strategies across sensors, compute modules, and communication systems. Obstacle Avaoidance & Navigation Integrate and optimize sensor fusion algorithms combining data from LiDAR, stereo cameras, IMUs, GNSS, ultrasonic sensors, and radar. Collaborate with AI and systems software teams to enable real-time SLAM, path planning, and autonomous navigation. Hardware-Software Co-Design Work closely with the Electronics, Mechanical, and Systems Integration teams to ensure tight coupling between hardware capabilities and embedded firmware. Review and contribute to PCB design for signal integrity, thermal considerations, and EMI/EMC compliance. Team Leadership & Technical Mentorship Build, mentor, and lead a high-performance embedded engineering team. Conduct technical reviews and provide architectural guidance. Testing, Validation & Compliance Define and drive testing strategies for embedded platforms under real-world and extreme conditions (temperature, vibration, dust). Implement robust debugging, diagnostics, and performance monitoring mechanisms. Required Skills & Experience Bachelor’s/Master’s in Electronics, Embedded Systems, Robotics, or related field. 8+ years experience in embedded systems development, ideally in drones, UGVs, robotics, or aerospace electronics. Expertise in Embedded C/C++, RTOS, and low-level driver development. Power management and battery systems integration. Sensor fusion and control systems for navigation. PCB design tools and hardware debugging (Altium, Eagle, oscilloscopes, JTAG). Communication protocols: CAN, I2C, SPI, UART. Prior experience with SLAM, obstacle avoidance systems, or autonomy-enabling technologies is highly preferred Preferred Skills Familiarity with AI/ML inference on embedded platforms for perception tasks. Experience with motor control, ESC optimization, and propulsion systems. Knowledge of safety-critical systems and functional safety standards (e.g., ISO 26262). Personal Attributes Problem-solving mindset with a hands-on approach. Strong leadership skills and ability to work in a cross-functional startup environment. Passionate about building cutting-edge autonomous systems. Compensation Competitive and commensurate with experience and capability. How To Apply Send your resume, project portfolio, or technical write-ups to careers@marutdrones.com

Handle current portfolio of Small Commercial Vehicles Handling the loans of Commercial (Used/New). Handle the whole process of providing Vehicle loan to customers. Follow up EMI customers & arrears customers for collection. Developing the new market area and gathering market information. Always try to make new market to generate sales. Making good relation with Dealers and also with existing Clients

Handle current portfolio of Small Commercial Vehicles Handling the loans of Commercial (Used/New). Handle the whole process of providing Vehicle loan to customers. Follow up EMI customers & arrears customers for collection. Developing the new market area and gathering market information. Always try to make new market to generate sales. Making good relation with Dealers and also with existing Clients

Job role: Handle current portfolio of Light Commercial Vehicles Handling the loans of Commercial (Used/New). Handle the whole process of providing Vehicle loan to customers. Follow up EMI customers & arrears customers for collection. Developing the new market area and gathering market information. Always try to make new market to generate sales. Making good relation with Dealers and also with existing Clients.

G+D makes the lives of billions of people around the world more secure. We create trust in the digital age with integrated security technologies in three business areas: Digital Security, Financial Platforms and Currency Technology. We have been a reliable partner for our customers for over 170 years with our innovative solutions for SecurityTech! We are an international technology group and traditional family business with over 14,000 employees in 40 countries. Creating Confidence is our path to success. Trust is the basis of our co-operation within G+D. The whole world trusts us when it comes to physical or digital currencies. We increase the security and efficiency of the cash cycle in collaboration with central banks and the entire currency industry. As the market leader in advanced currency management, would you like to join us in shaping the future of payments? Objective Of This Role: Electronics Lead will contribute to the ongoing progress in development, engineering and the competence Electronics. Team leader for internal and external electronics team and will be challenged to develop and strengthen a broad set of skills. Tasks & Responsibilities: Management and supervision of resources in Design, Process, compliance in the company’s product in Digital and Analogue circuit design, PCB layout, related Mechanical design, Firmware & Software development, part and vendor specification, Prototype build and debugging, Administration/documentation, test instruction and product manual. Managing electronic resources and allocating them to various projects as per requirements. Hands-on knowledge of process (design & development) from concept phase to the qualification & production of high end mechatronic system. Should be able to understand the system level requirement and convert them into electronics specifications, further develop concepts & prototype to finally create a production design as a lead Good knowledge of EMI/EMC & Safety test standards. And guiding the team for troubleshooting & solution analysis for EMI/EMC & safety testing Micro-level planning for every on-going project & tracking it through the process. Good knowledge of wire harness/cabling - (sub-system connectivity) & its required shielding in a cost effective manner Performing trade-offs for implementation alternatives of functions, Documenting specifications, concepts, designs and test analysis results Manage the competency and resources of team according to targets set by the company in terms of staffing and infrastructure requirement. Ensure product compliance with EMC/ESD considerations included in the design and that the design passes relevant regulatory requirements. Developing architectural concepts in multidisciplinary teams(Mech, SW, System, BSP & testing) Managing outsourcing activities at electronics development partners such circuit design & PCB design layout and value engineering Supporting allocation of manufacturing/production and other supply chain decisions Specification of electronic modules and systems, electronic components (sensors, motors, MOSFETs, amplifiers, power supply, microcontroller, iMX8 microprocessor, FPGA, components selection & PCB design review) Contributing specialist knowledge and experiences in one or more electronic engineering fields, such as signal processing, analog, digital and power electronics, firmware, high voltage electronics, PCB lay-out, EMI, etc. Manage and optimize process workflow. To ensure that proper steps and procedures are taken during the design process. (e.g. Documentations, EMC tests, Product validation, NPI, etc.). Organize design activities. Planning and conceptualizing new products. To conduct research and development on new products. To work with managers and members of other departments as required to ensure the smooth transfer of new products into production and into the marketplace. Education & Trainings: (Basic & Professional) B.E/B.Tech/M.E/M.TechTechnical knowhow: (Mention the technology on which person must be experienced)MandatoryConcepts of Digital ElectronicsLogic GatesPCB Layout and design – FPJ (Chip needs, programming and Selection)Microprocessors and Microcontroller – IMX-6, IMX-8, STM 32 Series, CAN Protocol, ARM basedStandards – ESD, EMI, I2C, SPI, Interference and compatibility Good to knowPLM SAPMotors (Design Stage)Soft Skills: (Inputs on soft skills required for role, like team management, communication, customer management etc) Experience (in yrs.)Total 10-15 yearsRelevant*(*Experience in related field, industry, products etc) 8-10 years JOB OFFER Job Details Job Title Tech Lead - Electronics Business Sector Giesecke & Devrient India Private Limited Plot No. 02 EHTP Sector - 34 Gurugram – 122001 Requisition ID 24861 Location Gurugram, IN Career level Experienced and Graduates Job Type Fulltime, Permanent We are an equal opportunity employer! We promote diversity in all its forms and create an inclusive work environment, free from prejudice, discrimination and harassment, in which all employees feel a sense of belonging. We warmly welcome all applications regardless of gender, age, race or ethnic origin, social and cultural background, religion, disability and sexual orientation.

Job Summary: We are seeking a skilled and detail-oriented PCB Design Engineer to join our engineering team. The ideal candidate will be responsible for designing and developing high-quality printed circuit boards (PCBs) that meet performance, reliability, and manufacturability standards for a variety of electronic products. Key Responsibilities: Design multilayer PCBs from schematic to final layout using CAD tools such as Altium Designer, Eagle, OrCAD, or KiCad. Collaborate with electrical engineers and mechanical designers to ensure PCB layouts meet system and enclosure requirements. Perform component placement, routing, and DFM/DFT (Design for Manufacturing/Testing) checks. Generate fabrication and assembly drawings, Gerber files, and BOMs. Review and incorporate design changes during the product development cycle. Conduct signal integrity, thermal, and EMC considerations during layout. Work with manufacturing partners to resolve fabrication or assembly issues. Required Qualifications: Diploma / Bachelor’s degree in Electronics Engineering, Electrical Engineering, or a related field. Proven experience in PCB layout and design ( 2-3 years ). Proficiency with PCB CAD tools (Altium, Eagle, OrCAD, KiCad, etc.). Understanding of IPC standards and PCB fabrication processes. Strong understanding of circuit design, component footprints, and electronic schematics. Familiarity with high-speed design, power delivery, and grounding techniques. Job Type: Full-time Pay: ₹14,156.69 - ₹35,000.00 per month Benefits: Health insurance Leave encashment Paid sick time Provident Fund Work Location: In person

Job Title: DC Server and Storage Expert Location: Rajkot (Government Office Deployment) Experience Required: Minimum 8 Years Qualification: BE/B.Tech in Computer Science, IT, or relevant field Certifications Preferred: Microsoft Certified: Windows Server Hybrid Administrator Associate / MCSE Red Hat Certified Engineer (RHCE) or equivalent Linux certification VMware VCP, Dell EMC / HPE Storage Certifications (desirable) Job Summary: We are looking for an experienced Data Centre Server and Storage Expert with strong expertise in managing, configuring, and maintaining data center infrastructure, including both Windows and Linux-based servers, as well as enterprise-level storage systems. The role demands hands-on experience and the ability to operate in a government-controlled secure IT environment. Key Responsibilities: Manage and monitor Data Centre infrastructure, including physical and virtual servers (Windows & Linux). Configure, maintain, and troubleshoot server hardware, storage arrays (SAN/NAS), and backups. Plan and implement system upgrades, patch management, and performance tuning. Ensure high availability, disaster recovery, and data integrity across all servers and storage devices. Work with virtual environments – VMware, Hyper-V, or other platforms. Create and maintain documentation of system configurations, procedures, and policies. Coordinate with application and network teams to support infrastructure requirements. Maintain compliance with security protocols and government IT policies. Respond promptly to incidents, outages, and service degradation affecting server/storage systems. ✅ Required Skills & Experience: 8+ years of hands-on experience in managing enterprise server and storage infrastructure. Strong proficiency in Windows Server (2016/2019/2022) and Linux OS (RHEL/CentOS/Ubuntu) administration. Experience with RAID configurations, SAN/NAS storage solutions (Dell EMC, NetApp, HPE, etc.). Familiarity with Active Directory, DNS, DHCP, Group Policies, and server roles/services. Backup and Disaster Recovery planning using tools like Veeam, Commvault, or NetBackup. Performance monitoring and capacity planning. Strong problem-solving skills and ability to work independently. Good communication and coordination skills. Employment Type: Full-time (Deputation/Contractual at Govt. Site – Rajkot) Job Types: Full-time, Permanent Pay: ₹600,000.00 - ₹700,000.00 per year Benefits: Flexible schedule Health insurance Life insurance Provident Fund Schedule: Day shift Morning shift Night shift Work Location: In person

Crest Data is a leading provider of data center solutions and engineering/marketing services in the areas of Networking/SDN, Storage, Security, Virtualization, Cloud Computing, and Big Data / Data Analytics. The team has extensive experience in building and deploying various Data Center products from Cisco, VMware, NetApp, Amazon AWS, EMC, and other Global hi-tech Enterprises. Crest Data Systems provides various engineering services including Software Development, QA/Automation, 3rd party Integration / building connectors. Crest also provides various Professional Services including Data Center Training, POC testing, Network Design/Implementation/Migration, and Sales Enablement. We are looking out for highly motivated technical leader in the development & testing area to join our engineering team in Ahmedabad. The primary responsibility will be to help design , develop & test Enterprise Software for our Global Fortune 500 clients in Data Analytics, Security and Cloud segments. Key Responsibilities : 5+ years professional experience with quality assurance and/or application development and Java programming with Selenium, Junit and TestNg Hands-on experience with Jenkins, Maven, Eclipse and git. Collaborate with developers and product managers to design specific testing strategies for features being developed. Generate comprehensive test plans and test cases, and execute them for feature verification and regression Strong fundamentals in Object-Oriented Design and Data Structures. Experienced Engineer with integration-testing framework like Selenium and Object-Oriented Programming Language - Apache Groovy . Contributes to participating in all quality activities within the Quality Engineering team including Testing, Automation, Test Planning, Design, Debugging, Execution, Review, Customer Support. Demonstrable experience with Agile and Test-Driven development. Reporting and Monitoring Drives continuous improvement initiatives that focus on software quality and delivery of delightful User Experiences Design and implement test automation for new features and existing features for regression testing. High-level understanding of in-memory distributed data storage systems like Memcache, Ehcache, Hazelcast. Key Skills : Hands-on Experience with SQL queries and solid understanding of database concepts Good understanding of software design patterns, algorithms and data structures. Good understanding of web service APIs. Experience with agile methodology and working in enterprise cloud based technologies Proven ability to learn new tools and technologies with minimal guidance. Should possess excellent oral, written, problem-solving and analytical skills. Must be able to succeed with minimal resources and supervision. Education : MS/BS/ME/BE in Computer Science or equivalent.

📍 Location: Bangalore • ⏱ Full-Time On-Site 🧭 About Edition As a core part of our hardware engineering team, you’ll create and integrate electrical architectures powering our smart home products—blending connectivity, reliability, and intelligence. 🚀 What You’ll Do Circuit Design & Firmware Integration: Design, prototype, and validate PCBs for IoT-enabled consumer devices Embedded Systems & Connectivity: Develop embedded firmware, select sensors, and integrate Wi-Fi/Bluetooth modules aligned with user features and power requirements . Testing & Debugging: Use oscilloscopes, analyzers, and debug tools to ensure signal integrity, power management, and RF performance Collaboration & Documentation: Work closely with mechanical, firmware, and product teams; maintain schematics, BOMs, and design files; create test plans and reports . ✅ You Bring Bachelor’s in Electronics/Electrical/Computer Engineering. 2+ years in IoT hardware design with experience in embedded systems and PCB development. Hands-on with microcontrollers, sensors, circuit simulation, and hardware test tools Strong documentation, analytical thinking, and cross-functional communication. 🎯 Nice-to-Have Knowledge of connectivity protocols (BLE, Wi-Fi, Zigbee). Exposure to power optimization, signal integrity, and EMC testing. Cloud integration or companion app collaboration experience.

Purpose of the Job : Drive and manage R&D initiatives in the Hardware team. Be the connection between the management and the team to realize the products from ideation to production. Ensure that the Design and Quality standards are defined and executed. Be the key source to close all the dependencies from the CFTs. Responsibilities : Research and Development: Owner of Schematic and PCB designs for all the R&D initiatives assigned to the Hardware team. Be the reviewer of all the design and validation activities driven by the hardware team. Ensure that the external dependencies raised by CFTs, or external teams are addressed promptly. Drive simulations and pre and post design activities for all Hardware activities to maintain efficient designs. Product Owner: Be the product owner for R&D initiatives. Owner of activities such as business cases, business proposal, product requirement and technical requirement activities, and present the same to the management. Owner of project planning, resource planning, costing, and daily project updates. Interact with marketing team for customer feedback, field visits and expos to understand the market requirement and drive projects and clearly define customer requirement. Interact with overseas team, customers to drive product implementation, validation and general feedback activities. Point of contact for field issues reported, conclude and communicate the action points and root cause with stakeholders. Team Manager: Distribute the tasks to individual members and enable leads to realize the goals. Set yearly goals to the members and monitor the same. Enable to members to realize the goals and fill in gaps wherever needed. Motivate the team and align individual’s effort for constant improvement. Lead the annual performance meeting for the team members. Communication: Prepare business proposals, timelines and budget proposals for projects for C-Suit meetings. Communicate risks, issues, delays or bottlenecks/ closures with CFT and C-Suit members when necessary. Discuss with manager and HR for any reportees’s issue, review or other queries. Lead weekly meetings with reportees to ensure timely updates on ongoing activities. Prepare a project tracker detailing the status of current and upcoming activities, this is also tp ensure reportee’s are aware of current and upcoming priorities. Required Skills: Proficiency in PCB design using Altium Design Software. Experience in Multi-Layer PCB design. Experience in PCB design with Signal Integrity, Power Integrity and EMI/EMC considerations. Experience in working with Serial protocols such as RS422/485, I2C, SPI, UART etc. Experience in working with Wi-Fi, LoRa and Bluetooth related hardware and antenna selection. Experience in working with Microcontrollers and Compute modules. Experience in preparing FEMCA & DFMEA analysis for Hardware designs. Experience in handling a team of technicians and junior engineers. Experience in managing team related to annual appraisals, performance review and goal settings. Experience in preparing project dashboards, steercos and review meetings for C-Suit level, management and CFT members. Proficiency in English. Qualification: BE in Electronics and communication / telecommunications.

Job Title: Enterprise Solution Specialist II – Storage Location: Noida (Hybrid) US Shift Job Summary: We are looking for an experienced level 2 Storage Engineer with expertise in Pure Storage, Dell EMC Unity, AWS storage services, and Cisco MDS switches to design, manage, and optimize our hybrid storage infrastructure. The ideal candidate will ensure high availability, performance, and security across on-premises and cloud storage environments while leading troubleshooting and automation initiatives. Key Responsibilities: On-Premises Storage Management: Pure Storage: Administer Pure Storage FlashArray and Systems, including provisioning, replication (Active Cluster, Snapshots, Async/Sync), and performance tuning. Troubleshoot Purity OS, NVMe-oF, VMware/ESXi, and Kubernetes CSI integration. Implement Safe Mode, Secure Erase, and encryption for data security. Optimize storage using Pure1 Analytics and Cloud-Based Monitoring. Dell EMC Unity: Manage Unity All-Flash and Hybrid arrays, including SAN/NAS provisioning, FAST Cache, and tiering. Configure replication (SyncIQ, Snapshots, Metro Sync) for disaster recovery. Monitor performance using Unisphere and CloudIQ. Troubleshoot issues related to block (iSCSI/FC) and file (NFS/SMB) storage. Cisco MDS Switches: Configure and manage Cisco MDS 9000 series switches (VSANs, zoning, NPV/NPIV, Port Channels). Optimize SAN fabric performance, ISLs, and congestion management. Implement SAN security (FCSP, Port Security, Device Aliasing) and firmware upgrades. Automate SAN operations using Cisco DCNM (Data Center Network Manager). Cloud Storage (AWS): Manage AWS storage services including EBS, S3, FSx, Storage Gateway, and Backup. Optimize cloud storage performance, cost, and lifecycle policies. Implement hybrid storage solutions (AWS Storage Gateway, DataSync, Snow Family). Ensure **data protection and compliance (AWS Backup, S3 Glacier, encryption). General Storage & Automation: Design high-availability storage solutions (block, file, object) with multi-pathing (ALUA, MPIO). Automate provisioning and monitoring using Ansible, Python, PowerShell, or Terraform. Collaborate with virtualization (VMware/Hyper-V), backup and cloud teams. Lead root-cause analysis (RCA)for storage/SAN outages and performance issues. Maintain documentation (architecture diagrams, runbooks, capacity plans). Required Skills & Qualifications: 5+ years of hands-on experience managing Pure Storage, Dell EMC Unity, Cisco MDS, and AWS storage. Deep expertise in Fiber Channel, iSCSI, NVMe-oF, SAN/NAS protocols, and hybrid cloud storage. Strong scripting skills (Python, Ansible, PowerShell, Terraform) for automation. Experience with storage replication, disaster recovery, and data migration. Certifications such as: Pure Certified Data Storage Associate Dell EMC Unity Specialist AWS Certified Storage Specialist Cisco CCNP Data Center (preferred) Preferred Qualifications: Experience with Pure, Unity & Storage MDS/Nexus Switches. Knowledge of AWS/Azure storage services. Familiarity with ITIL processes (Change, Incident, Problem Management). Why Join Us? Work with cutting-edge hybrid storage technologies (Pure, Unity, MDS, AWS & Azure). Lead large-scale storage transformation and cloud migration projects. Collaborative environment with cross-functional IT and DevOps teams.

QUALITY DEVELOPMENT SPECIALIST - SYSTEM ELECTRONICS (M/F/D) Location Coimbatore - Tamil Nadu, India Pacesetting. Passionate. Together. HELLA is a listed, internationally positioned automotive supplier operating under the umbrella brand FORVIA. Within this de facto group, HELLA stands for high-performance lighting technology and automotive electronics. At the same time, the Company covers a broad service and product portfolio for the spare parts and workshop business as well as for manufacturers of special-purpose vehicles with its Lifecycle Solutions business group. HELLA has around 36,000 employees at more than 125 locations worldwide and generated consolidated sales of € 6.3 billion in the fiscal year 2021/2022. YOUR TASKS Job Objective In the business division lighting as part of advanced quality planning, you are responsible for the analyses of electronic-specific product requirements (Automotive lighting systems) and ensuring of implementation within the product development process. Tasks: Hands on experience in Hardware design / New product development from scratch to the qualification phase within the Quality development role. Analysis of technical customer requirements in relation to electronics quality issues and ensuring their compliance in the product development process (PDP). You will develop test strategies to safeguard electronic product requirements (functional, thermal, EMC) at system level, as well as system integration in development and production, and support their implementation. Integrate test items for electrical, functional and EMC qualifications tests into lamp DVP & R. Negotiate EMC report and electric topics of DVP with the Customer. Furthermore, you support the responsible interfaces in preparation of offers with focus on electronic quality issues and in evaluation of customer quality requirements, including the breakdown to single components (PCBA level). Through reviews, you support the project team in adhering to processes and automotive standards. You support the project team methodically in error analysis, risk analysis and the implementation of lessons learned measures. You ensure the implementation and application of existing quality tools and methods. During internal / customer audits you support the project team with your expertise on electronics quality issues. Preparing regular quality status reports in cooperation with the superior to support and inform the respective management levels. All these tasks must be carried out in interdisciplinary project team with international team members working on technically challenging products. Work experience in APQP, PPAP, System Testing Electronics, ISO26262, IPC certification, FMEA & Validation. Functional areas: Electronics Design or Test Laboratories, D&D Quality, Hardware Production [SMT], Hardware Process Planning, Process Quality. YOUR QUALIFICATIONS M. E – Electronics & Communication / Mechatronics / Power Electronics B.E – Electronics & Communication Engineering 3-7 years of relevant experience in the Automotive / Telecommunications industries is required. Skills Required: Professional experience in quality management in international automotive environment preferably. Experience in electronics testing and system integration, as well as system requirements analysis is an advantage. Understanding of the interaction of electronics and EMC at the system level desired. Knowledge of quality tools such as FMEA, problem solving, DMAIC. Confident demeanor and strong communication skills. Ability to work in a team and analytical thinking. Good written and spoken English knowledge. Ability to adopt quickly to new environment, stress resistant. Willingness to travel Take the opportunity to reveal your potential within a global company that offers you the best possible conditions for progressing in your career. Please send us your application through our careers portal, citing reference number req16648. HELLA India Automotive Pvt Ltd. Gokulakrishnan Vijayakumar

As a Sr. Marketing Engineer specializing in EMI / EMC applications, you will be expected to leverage your expertise and skills to contribute effectively to our team. With a minimum of 4-5 years of experience in the field, your primary responsibility will be to apply practical knowledge in EMI / EMC applications. At Scientific, we value talent and experience, and our inclusive and supportive workplace culture reflects our commitment to excellence, precision, innovation, and a customer-first approach. We believe in the power of teamwork and collaboration, where every voice is heard and valued. Our work environment is designed to inspire creativity and innovation. We prioritize the safety and well-being of our team members by maintaining all necessary safety protocols. This ensures that you can work in a healthy environment and grow to your full potential. As part of our commitment to employee development, we offer numerous training programs and clear career pathways. We encourage you to explore and succeed in various domains, supporting your career growth and providing opportunities for advancement. Team spirit and work-life balance are integral to our company values. We organize regular team-building activities, social events, and company outings to foster a collaborative and enjoyable work environment. Join us at Scientific in Indore, where you will have the opportunity to apply your expertise in EMI / EMC applications, contribute to our innovative projects, and grow professionally in a supportive and inclusive workplace.,

Proto Vehicle Build management and E&E Issue resolution Management Tracking of all ECUs parameterisation, Variant coding , Immo pairing Management of Software updating on proto vehicle Monitoring and Review of Electrical check list for each vehicle till Vehicle Sign-off Support to Certification vehicles like EMI-EMC / VRDE / ARAI / Testing for the software updating. Co-ordinatio n for resolution of Electrical and wiring harness issues on Testing Vehicles Tracking of Resolution of issues raised in f Proto shop & ODT, plant meetings Co-ordinate for resolution of EOL / Diagnostics issues Management of E&E activities on Media veh icles Vehicle build completion tracking report Electrical Issue resolution reports. Tracking of Electrical checklist and sign -off report Software tracking of Beta/ PO/ PP batches for vehicle program Summary report of EOL issues Resolution and EOL tool e valuation Lead in resolving QRT E&E Issues Production line issue resol

Requirements: BE/B Tech (EC/ EE / Instrumentation) Embedded Systems Solutions QUICK CONTACTS Field Application Engineer PCB Tools (Altium PCB Development Tools) Requirements: BE/B Tech (EC/ EE / Instrumentation) Job Function Technical support, training and consultancy for our customers in India with a focus on PCB development - Providing Pre and Post product support - Deliver demo and technical presentation - Discussing customers needs and identifying suitable solutions - Joint development of sales strategies - Customer visits, presentations, product demonstrations, seminars and workshops - Conduct presentation on products/concepts - Resolve customers critical technical problems - Active participation in conferences and trade fair Job Description Work experience on tools like Altium, Orcad, PADS, Hyperlynx, Altium, Allegro etc Good Technical knowledge on PCB/ SI/EMC Exposure to board design and verification would be an added advantage Experience In Product Positioning Good Communication Skills Self-starter/ Learner

We have an opportunity for Storage Administration L2 Education : Btechh/BE /MCA(Full time) Experience : 2 - 12 Years of Experience in IBM/EMC or Other Storage products Responsibility : Management of the storage solution including storage management policy, configuration and management of disk array, SAN fabric or switches, Virtual tape library, storage servers etc. Storage management including management of space, SAN volumes, RAID configuration, LUN, zone, security, business continuity volumes, performance etc. Aptitude towards problem solving and troubleshooting skills on Storage, SAN/NAS connectivity. Excellent product knowledge and troubleshooting skills on any two products IBM/EMC/HPE and Unified/NAS/S3 products Knowledge on Replication technology/DR. Basic understanding of Operating systems and Networking Good understanding and basic troubleshooting knowledge on SAN and NAS. Experience in atleast two models IBM ESS 5k/Flash 91XX//PMAX/VMAX/Isilon/DS8k/HP Primera, XP8, storeonce, Scality, NetApp Cluster mode, Hitachi products. Experience in Cisco MDS or Brocade switches Excellent verbal and written communication skills Experience in troubleshooting in a technical environment Excellent analytical and problem-solving skills Software and hardware knowledge of storage Must be able to support 24*7 rotational shifts. Should be comfortable with learning new technologies and travelling PAN India to support new projects. Change process (CR) is a must Preferred Skills/Knowledge: Knowledge of Remote Support and Remote monitoring processes and concepts Tools Knowledge on HP SM Experience in Unix/Linux, Windows and Vmware Exposure on Virtualization. Desired/Good to have Certifications: Certifications that are directly related to administration or implementation or designing of storage arrays is mandatory (Not specific to any vendor) Good to have any certifications from following list NetApp Certified Technology Solutions Professional NetApp Certified Data Administrator, ONTAP HPE ASE Storage solutions HPE XP8 Data Replication and High Availability H61R3S HPE XP8 Storage Array Administration and Configuration H61R2S Managing HPE Primera HM9Q4S

Job Title Senior Systems Engineer - EMC Job Description We are seeking an experienced EMC Systems Engineer to join our IGT Systems team. This role is ideal for a compliance-focused professional with a strong background in medical device safety, EMC/EMI testing, and regulatory standards. You will lead EMC strategy development, risk management, and compliance activities, ensuring our products meet global regulatory requirements and maintain the highest standards of safety and performance. Job Responsibilities: Collaboratively co-create, define, execute, and maintain the EMC System strategy for IGT-S Systems as a part of the Norm Compliance Team IGT-S. Co-ownership of the System-level EMC Risk Management file, crafting and maintaining system-level EMC & Radio compliance evidence. Develop EMC processes, tools, and provide training for EMC engineers. Develop and own EMC-related renewal projects and ensure alignment with internal and external certifying bodies. Work closely with stakeholders such as the MDC team, EMC LAB , and internal and external certifying bodies to optimize the usability of created evidence. Foster successful cooperation within your team and with stakeholders. Qualifications: Bachelor s or Master s degree in Electronics, Electrical Engineering, Mechanical or a related field. 15+ years of experience in product safety and compliance engineering, with at least 5 years in EMC/EMI testing and certification. Proven experience with medical device standards including IEC 60601-1, IEC 60601-1-2 Hands-on experience with product certification processes (CB, NRTL, CSA). Strong understanding of risk management and EMC/Safety engineering. Experience in product development, lifecycle management, and regulatory audits. Excellent communication, coordination, and stakeholder management skills. Ability to work independently and collaboratively in a global, cross-functional environment. Preferred Attributes: Experience working or collaborating with certifying bodies and regulatory agencies. Strong focus on patient safety and product quality. Ability to lead and influence in a matrixed organization. Green belt certification

Role Summary : Lead a team of engineers and technicians in the design, development, and testing of embedded hardware, firmware, and software components for Industrial automation systems. Manage the full lifecycle of projects, from concept to deployment, including project planning, resource allocation, and risk management. Conduct feasibility studies and cost-benefit analyses to evaluate the viability of automation projects and recommend optimal solutions. Ensure that new product development projects are executed to achieve the cost and schedule objectives. Review all documentation of project including SW/HW/Project Management related to technical aspects. Focus to build competent engineers in both technical & professional and guide them to meet & exceed their performance metrics to support Flowserve organization. Have strong collaboration with global business units engineering leaders; understand their needs and expectations drive the engineering team to deliver the same. Review and approve the work done by the team and work closely with the engineers, guide, motivate and coach them to meet the business expectations. Collaborate closely with global team and ensure timely execution of programs in the team. Job Responsibility : Proficiency in embedded hardware design, including microcontroller-based systems, sensors, actuators, and communication interfaces. Proficiency in microcontrollers, power supplies (DC-DC converters, LDOs), Motor Drives, ADC/DAC, & communication protocols (UART, SPI, I2C, CAN, RS485, Ethernet, BLE). Expertise in analog - digital circuit design and compliances like EMI/EMC, safety, reliability standards. Knowledge of PCB layout, board stack ups, grounding strategies. Proficient in hardware bring-up, debugging, and validation using lab instruments (oscilloscope, multimeter, logic analyzer, etc.). Expertise in firmware development for embedded systems, including real-time operating systems (RTOS), device drivers, and low-level programming languages (C/C++). Familiarity with DCS systems, industrial communication protocols, such as HART, Foundation Fieldbus, Modbus, Profibus, Ethernet/IP, and OPC UA. Excellent project management skills, including the ability to plan, organize, and prioritize tasks effectively. Effective communication and interpersonal skills, with the ability to collaborate with multidisciplinary teams and stakeholders. Job Requirement: Engineering degree in Electronics & Communication or Electrical & Electronics or Electronics & Instrumentation with 5-8 years of experience in product and application development Experience in managing engineering teams specializing in embedded systems.

Job Summary Datacenter Domain Specialist – SME is a senior-level expert responsible for the management, optimization, and continuous improvement of all aspects of datacenter operations, including server, storage, backup, infrastructure, and disaster recovery (DR). This role involves overseeing the technical operations of datacenter environments, project management of datacenter initiatives, ensuring compliance with internal and external standards, and managing vendor relationships. The Datacenter Domain Lead will act as a subject matter expert, providing strategic direction, ensuring operational efficiency, and supporting audits and compliance initiatives for datacenter operations. Roles and Responsibilities Datacenter Operations Management: Lead day-to-day operations of global datacenters, ensuring all systems are running optimally, including servers, storage, backup, and associated infrastructure. Oversee the capacity planning, performance monitoring, and resource allocation to meet current and future business requirements. Manage operational procedures for incident response, disaster recovery (DR), and business continuity planning (BCP). Ensure that the datacenter environment is reliable, secure, and aligned with business objectives. Datacenter Infrastructure & Technology Management: Lead the architecture, design, and implementation of datacenter systems, ensuring high availability, fault tolerance, scalability, and security. Oversee and manage technologies such as servers (physical and virtual), storage systems (SAN, NAS, DAS), networking, and backup systems, including cloud and hybrid environments. Continuously assess, optimize, and manage the lifecycle of IT infrastructure, including hardware, software, and firmware updates/upgrades. Develop and enforce best practices for server management, virtualization, and storage. Project Management: Lead and manage large-scale datacenter projects, such as infrastructure upgrades, migration initiatives, and cloud adoption strategies, from inception to completion. Develop project plans, budgets, timelines, and resource allocation, ensuring that projects are delivered on time, within scope, and on budget. Coordinate with cross-functional teams to ensure alignment on project deliverables, risk management, and change control processes. Ensure the timely and accurate reporting of project status, issues, and risks to stakeholders. Backup and Disaster Recovery Management: Oversee the design, implementation, and testing of backup and disaster recovery strategies, ensuring that recovery objectives (RPO/RTO) are met. Design and implement efficient, scalable backup and recovery solutions for enterprise data, ensuring business continuity and disaster recovery (DR). Create and enforce backup strategies to ensure timely, accurate backups of critical systems, applications, and data. Develop and manage backup schedules and strategies for on-premise, cloud, and hybrid environments. Manage the regular testing and documentation of disaster recovery plans to ensure preparedness for unplanned outages. Maintain comprehensive documentation of backup and recovery procedures, configurations, and policies. Produce regular backup performance reports and recommend improvements to senior management. Create and maintain internal documentation for DR testing, incident responses, and compliance audits. Work with internal teams and vendors to develop, refine, and execute incident response and business continuity strategies. Regularly assess the storage capacity and performance of backup systems, ensuring scalability as data volumes grow. Perform regular optimization of backup processes to reduce backup windows, improve efficiency, and enhance overall backup performance. Keep up to date with new releases and patches for backup software to ensure the environment is secure and up to date. Compliance & Audit: Ensure compliance with regulatory, industry, and company-specific standards (e.g., GDPR, HIPAA, SOX, ISO 27001). Assist in preparing for and supporting internal and external audits, ensuring that the datacenter environment adheres to required compliance standards. Review and ensure that all datacenter operations meet security, risk, and privacy requirements, including data encryption, access controls, and disaster recovery protocols. Act as a key point of contact during audits, liaising with auditors and business units to ensure that evidence is provided and that audit recommendations are acted upon. Vendor Management: Lead vendor selection, contract negotiation, and performance management for datacenter-related services, including hardware procurement, storage, backup, and cloud service providers. Maintain strong relationships with third-party vendors, ensuring they meet service level agreements (SLAs), resolve issues promptly, and deliver according to agreed timelines. Oversee vendor risk assessments and work closely with procurement and legal teams to ensure compliance with corporate policies. Manage vendor escalations and dispute resolution, ensuring minimal disruption to operations. Strategic Planning and Budget Management: Lead the budgeting process for datacenter operations, ensuring cost-efficient resource allocation and capital expenditures. Provide strategic insights and recommendations for optimizing data center operations, enhancing efficiency, and reducing costs. Ensure that the datacenter infrastructure is aligned with business objectives and future scalability needs. Collaborate with finance, procurement, and senior leadership to align on budgeting, financial planning, and cost-saving initiatives. Process and Procedure Development: Develop, document, and enforce operational processes and procedures for all aspects of datacenter management (e.g., change management, incident management, patch management). Standardize best practices for datacenter operations, including system configuration, deployment, monitoring, and maintenance. Drive continuous process improvement, leveraging automation and tools to streamline operations, enhance productivity, and reduce manual intervention. Team Leadership and Collaboration: Lead a team of IT professionals responsible for datacenter management, including server administrators, storage engineers, and network specialists. Foster a collaborative and high-performance work culture, mentoring team members and ensuring skills development through training programs and certifications. Work with internal teams (e.g., IT Security, Cloud, Networking) to ensure alignment and integration of datacenter strategies with overall IT strategies. Provide leadership and guidance during major incidents, outages, or DR events, ensuring the team’s effective response and recovery. Continuous Improvement and Innovation: Stay up to date on the latest trends in datacenter technologies, storage solutions, backup strategies, and disaster recovery. Evaluate new tools, technologies, and solutions to improve datacenter efficiency, performance, Job Requirements Educational Qualification : Bachelor's degree in Computer Science, Information Technology, or a related field (or equivalent work experience). Specific Certification : VMware Certified Professional (VCP), Microsoft Certified Solutions Expert (MCSE), or Cisco Certified Network Associate (CCNA). ITIL v3 or ITIL 4 certification (Service Management). Certified Data Center Professional (CDCP), Certified Data Center Management Professional (CDCMP), or Certified Data Center Expert (CDCE). Project Management Professional (PMP), Prince2 or equivalent certifications. Either of EMC and NetApp, AND preferred at least one of HP storage, EMC Networker, Symantec NetBackup, CommVault, Cloud backup solution. Advance Excel, Microsoft Word, and PowerPoint 2013, MS Project, MS Visio Technical Skills: Storage Technologies: Expertise in EMC, NetApp, HP Storage etc. Storage Infrastructure Management: Experience in SAN design, LUN masking, zoning, fiber channel switches (Cisco, Dell, HP, Brocade), and storage capacity planning. Datacenter & Infrastructure: Strong knowledge of SAN, NAS, server architecture, and network. Cloud Solutions: Proficient in AWS, Azure, and hybrid datacenter environments. Backup & Disaster Recovery: Expertise in backup technologies (e.g., CommVault, Veeam, NetBackup, Veritas, IBM Tivoli, Cloud Backup Solutions) and disaster recovery solutions. Operational & Analytical Skills: ITIL & ITSM Frameworks: Experience in ITIL processes for service management and operational efficiency. Troubleshooting & Performance Optimization: Strong troubleshooting skills for SAN performance, storage issues, and network connectivity. Capacity Planning & Monitoring: Skilled in monitoring, reporting, and analysing storage systems for optimal performance and capacity utilization. Problem-Solving & Critical Decision-Making: Strong analytical skills to identify issues, provide solutions, and make critical decisions in high-pressure environments.

Key Account Manager – B2B IT Infrastructure Sales Locations: Hyderabad Experience: 4–5+ Years Salary: ₹8–15 LPA Type: Full-Time | Immediate Joiners Preferred About the Role We’re hiring a Key Account Manager to drive enterprise sales in IT Infrastructure – focusing on Servers, Storage, Networking, and Security . Ideal for professionals with a strong OEM network, enterprise account ownership, and consultative selling experience. Responsibilities Manage & grow enterprise accounts across your territory Sell IT infra solutions: Servers, Storage, Networking, Cybersecurity Build strong relationships with CXOs & IT decision-makers Drive account-specific strategy, upselling & cross-selling Collaborate with OEMs, pre-sales & solution teams Track account health and ensure long-term retention Must-Have Experience 4–5+ years in B2B IT Infra Sales (Servers, Storage, Networking, Firewalls) OEMs like Dell, HPE, Cisco, NetApp, EMC, Aruba, Juniper Strategic account management & solution-based selling Exposure to sectors: BFSI, Manufacturing, IT/ITES Strong communication & stakeholder management Candidates from ValuePoint Systems or similar OEM-focused firms are preferred. Apply Now Ready to lead enterprise digital transformation with high-impact IT solutions? Drop your CV at mrigna.mordani@visionaryhire.com Job Types: Full-time, Permanent Pay: ₹800,000.00 - ₹1,500,000.00 per year Benefits: Health insurance Internet reimbursement Paid time off Provident Fund Schedule: Day shift Monday to Friday Work Location: In person

Job Title: Sr. Hardware Design Engineer Location: Research and Innovation Park, IIT Delhi Company: Zerodrag Technologies Private Limited Experience: 4–6 Years Type: Full-Time About Us: At Zerodrag , we are engineering the core systems that power intelligent UAVs. From flight control and motor control to communication systems and payloads , we design and build the complete electronics stack that enables high-performance, autonomous aerial platforms. We operate in a high-stakes environment where speed, precision, and innovation are non-negotiable. Our work pushes the boundaries of what unmanned systems can do — and we move fast to stay ahead. If you’re driven by impact and want to build the future of UAV technology, you’ll find your place here. Role Overview: We are looking for a Hardware Design Engineer to lead and execute the electronics design process for our products — from schematics to final production. This is a hands-on, dynamic role that requires strong technical ability, critical thinking, and adaptability. Responsibilities: Design hardware schematics based on detailed product and system-level requirements. Identify and source the right components for performance, cost, and supply chain optimization. Coordinate or delegate PCB layout tasks to the internal layout design team and oversee reviews. Collaborate with firmware, mechanical, and manufacturing teams for end-to-end integration. Validate hardware designs through testing, bring-up, and debugging of prototypes. Maintain clear documentation for schematics, BOMs, layout files, and test procedures. Take ownership of hardware deliverables under tight timelines and high expectations. Continuously refine the design process and stay up to date with industry trends and tools. Requirements: Bachelor’s or Master’s degree in Electronics/Electrical Engineering or a related discipline. Proven experience in schematic design using Altium Designer, KiCad, or any modern EDA tool. Comfortable working in a high-speed, iterative development environment. Strong debugging, analytical, and documentation skills. Ability to adapt to changing requirements and take initiative independently. Nice to Have: Experience with high-speed digital, mixed-signal, or RF designs. Knowledge of EMI/EMC best practices and industrial standards (IPC, ISO, MIL-STD). Exposure to embedded systems or firmware-hardware bring-up. What You Can Expect: A fast-paced, mission-driven work environment where your contributions directly impact real-world systems. A flexible work schedule and generous leave policy — we care about outcomes, not hours. While work-life balance is respected, we expect commitment during occasional crunch periods (typically less than 5% of the time). Ownership, autonomy, and the opportunity to grow rapidly across multiple technology domains. A close-knit team that values transparency, initiative, and impact over hierarchy. For more information, or to apply, please contact us at: careers@thezerodrag.com

Job ID: 1727 Location: Fully On-Site, Pithampur, Madhya Pradesh, IN Job Family: Research and Development Job Type: Permanent Employment Type: Full Time About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people – and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you’re in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can’t happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Job Purpose Responsible for performance evaluation of all CE machines as per specifications defined for project, Testing of Construction equipment machines to meet the technical requirements of CE products manufactured at Case India and meet the organization level targets of Global Product Development and Current product Management. Key Responsibilities Perform Loader Backhoe, Compactors test activities as assigned for DVP or PIR closure as per CNH standard test procedure, ISO and AIS standards. Troubleshooting and diagnostic on machines. Evaluate technical aspects of Machine test, Subsystem test, Component level test, field test related to all product. Participation in DFMEA or Design Validation Plan creation as directed Machine/component rework required for test set up. Accurate record keeping of test activities, results & test samples Active participation in Problem resolution Board & demonstrate machine observations/non-conformities to team. Experience Required Experience Required is 7 to 10 Years Hands on experience in Construction Equipment’s products testing – Construction Equipment products-Loader Backhoe, Compactor Test instrumentation on vehicles (EDAQ, Dewesoft Data loggers, Oscilloscopes, Multimeters, function generators, CAN analyzer, Diagnostic tool, Fuel flow meters, V-BOX, Noise Setup) Test Parameters Data acquisition Skill on CEV: Pressure, Temperature, Vibration, Strain gaging, Noise, Voltage, Current, Flow, Fuel Consumption, Productivity Testing, Evaluating Vehicle Parameters on Bench, Lab-Cold start performance, EMC, HVAC, Steering effort, Brake performance. Troubleshoot problems, recommend corrective actions, implement solutions. Preparation of Test reports and discuss test results with Engineering. Nice to have experience in component testing Communication with Global and CFT team for validation activities. Basic Knowledge of CMVR compliance. Participation in design review and DFMEA & Monitoring and Inspection of Reliability Validation Vehicles and PIR resolution meetings. Excellent communication & interpersonal skill Knowledge of MS office, N-code, CATMAN & Good presentation skill Preferred Qualifications B.E. / B. Tech in Engineering (Mechanical/ Electrical/ Automobile) What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. To support our employees, we offer regional comprehensive benefits, including: Flexible work arrangements Savings & Retirement benefits Tuition reimbursement Parental leave Adoption assistance Fertility & Family building support Employee Assistance Programs Charitable contribution matching and Volunteer Time Off

Location : Manesar (On-site) Experience : 4-6 Years Job Description : Understand the complete mechanical design cycle of a product (Concept Generation, Detail Design, Testing, Manufacturing Knowledge of agile and rapid prototyping techniques to meet tight program schedules Willingness to work closely with production manufacturing team and vendors to deliver timely cost effective and reliable designs Should be able to work with hardware design team Experience in Audio-Video / Multimedia Consumer products (IoT Devices, Security Camera, Mobile Phones, Rugged Handheld Devices etc.) Good understanding of the molding process, casting process, machining process Good understanding of designs for rugged, outdoor, cost effective, long life products Experience with plastics and sheet metal part design Expert level software knowledge in Solidworks preferred. Software knowledge in graphic design tools and simulation will be an advantage. Knowledge in Tolerance Stack Up Analysis, GD&T, ASME Y14.5, DFM & DFA practices Ability to understand thermal management & analysis, RF shielding, EMI/EMC Shielding Good knowledge of industry standards and product certification Analytical problem solving skills Good communication skills.

Job Description: Hardware Engineer Exp:15 +Yrs. Job Location: Chennai Notice Period: 30 Days General Description: Role is responsible for the technical delivery of automotive electronics hardware for global vehicle OEMs including Instrument clusters, In vehicle Infotainment, Information displays and cockpit electronics controllers. Responsibilities: Work independently on design tasks to lead the electrical hardware design Review customer specifications. Design and development of Automotive Products with Micro, SOC’s, High speed memory, LVDS, FPD Link-III circuitry, high speed design for automotive applications Design and development of Microprocessor and DSP Digital Core, Audio, Camera and video signals, analog and digital control logic, linear and switching power supplies, for automotive applications Perform worst case analysis and simulations to ensure compliance to customer requirements Support product design reviews Create and maintain schematic and assembly drawings and release within the change management structure Develop and maintain electrical DFMEA Generate electrical information to ECAD for PCB layout and support ECAD designer Support hardware prototype build Create product verification plan and perform testing Support EMC and validation testing Utilize structured problem solving techniques for test failure resolution Present product design, analysis and testing to customer Lab equipment experience with power supplies, oscilloscopes, function generators, multi-meters etc.

JD: Role: Department Head/ Sr Manager (Mechanical) Location: Manesar Experience: 15+ yrs Primary Skill: Mechanical Design (Automotive) Required Skill Sets:  Strong proven experience in delivering automotive products from design to manufacturing including Infotainment, ADAS and HPC products 2) Strong knowledge in providing solutions to products including proposal making 3) Proven experience working with various streams including Hardware, Software and Project Management 4) Strong Knowledge & experience in FMEA, DVP, DFM, DFA, GD&T, CAD, CAE & PLM  Expertise in Product Engineering, Product Design & Development, Innovations,NPD (New Product Development), and Program Management for both OEMsand Component Manufacturers.  Proven ability to establish and lead a highly competent engineering team, delivering end-to-end product development with effective risk mitigation strategies.  Extensive experience in the entire lifecycle of mechanical products, covering: o Pre-Conceptualization & Concept Design o Material Selection & Prototyping o FEA Simulation, Testing & Validation o Tooling Development & Process Engineering o Industrialization & VAVE (Value Analysis & Value Engineering)  Strong knowledge and experience in: o FMEA (Failure Mode & Effects Analysis) o DVP (Design Verification Plan) o DFM/DFA (Design for Manufacturing/Assembly) o GD&T (Geometric Dimensioning & Tolerancing) o CAD/CAE/PLM (Product Lifecycle Management)  Expertise in Plastics, Sheet Metal, FRP, Rubber, and Die-Cast parts.  Experience in competency development, people management, and best practice implementation.  Knowledge of agile and rapid prototyping techniques to meet tight project deadlines.  Strong collaboration with production, manufacturing teams, and vendors to ensure timely, effective, and reliable designs.  Ability to work closely with hardware design teams.  Deep understanding of: o Molding, casting, and machining processes. o Design for rugged, outdoor, cost-effective, and long-life products. o Thermal management, RF shielding, and EMI/EMC shielding.  Expert-level proficiency in SolidWorks (Knowledge of graphic design tools and simulation software is an advantage).  Familiarity with industry standards and product certification processes.  Strong analytical problem-solving and communication skills. Key Skills:  Product Design & Development (Mechanical Domain)  Automotive Plastic Components, Sealings, and Weather strips  Plastics, Sheet Metal, FRP, Rubber, and Die-Casting Components  Mechatronics and Electromechanical Components  Engineering & Cross-Functional Team (CFT) Leadership  Innovation & New Technologies  Conceptualization & Prototyping  Product Validation, Program Management, Tooling & Process Engineering  Vendor Development & QMS (Quality Management System)  APQP, FMEA, PPAP (Automotive Quality Standards)  Tooling CAPEX & Product Cost Optimization  VAVE & Profitability Enhancement  Leadership & Cross-Team Collaboration  Competency Development