3013 Electrical Maintenance Jobs - Page 44

Responsibilities: * Perform electrical maintenance on equipment and facilities * Ensure compliance with safety standards at all times * Maintain, wire & test HT/LT panels and substations * Collaborate with team members as needed Health insurance Provident fund Annual bonus

Preventive Maintenance: Conduct routine inspections and scheduled maintenance to prevent equipment failures. Troubleshooting & Repair: Diagnose mechanical, electrical, and other technical issues in equipment and perform necessary repairs.

Sets up and operates haemodialysis machine to provide dialysis treatment for patients with kidney failure Attach dialyzer and tubing to machine and prime the extracorporeal circuits with 0.9% normal saline to prepare machine for use. Label dialyser & blood lines with patient name & ID prior to the first use (excluded single use). Preparing dialysis solutions and mixing bicarbonate according to formula Explains dialysis procedure and operation of haemodialysis machine to patient before treatment to allay anxieties. Connects haemodialysis machine to patient s access site to initiate dialysis. Monitor haemodialysis machine for malfunction. Maintain all the log books, forms & registers.

KP Group is looking for Plumber to join our dynamic team and embark on a rewarding career journey Installation of Plumbing Systems: Install and connect pipes, fixtures, and fittings for water supply, heating, cooling, and drainage systems in new construction or renovation projects Repair and Maintenance: Diagnose and repair plumbing issues, such as leaks, clogs, broken pipes, and faulty fixtures Pipefitting: Measure, cut, and thread pipes to fit specific locations and angles, using various plumbing tools and equipment Water Heater Installation: Install and service water heaters, boilers, and other heating systems Fixture Installation: Install and repair plumbing fixtures, such as sinks, toilets, bathtubs, showers, and faucets Backflow Prevention: Install and maintain backflow prevention devices to prevent the contamination of water supply Drain Cleaning: Use specialized tools, such as drain snakes or hydro-jetting equipment, to clear clogs and blockages in drain lines Gas Line Installation: Install and repair gas lines for appliances, such as stoves, water heaters, and fireplaces Plumbing Inspections: Conduct plumbing inspections to identify potential issues or compliance with plumbing codes and regulations Emergency Repairs: Respond to emergency plumbing calls, especially in cases of water leaks or pipe bursts

Major Deliverables: Generate leads & business from assigned dealership as well as the open market Maintain a healthy relationship with Dealers for sales objective. Ensuring Post Disbursal Documents (PDD) updation RC, First EMI & Non starter collection & its updation to maintain the portfolio Timely Communication to dealers staff about the scheme / HO communication about payouts/RC, etc Ensure enhanced sourcing & business at the dealer counter(s) being managed Ensure proper implementation of all the finance schemes in operation at Dealer level & impart regular training on the same to the dealer Sales team Understanding of customers need and proper guidance / explanation of the finance schemes to the customers Daily sharing of MIS with case wise status of the leads given by dealership Minimum Nos. expected as per productivity matrix. Login to conversation to maintain the targeted ratio.

Installation and Maintenance, Troubleshooting and Repair, MEP Coordination, Safety and Compliance, Blueprint Reading, Proficiency in MS Office, CADD Software, Ability to diagnose and resolve electrical faults effectively

Sound knowledge of industrial electrical systems Familiarity with fabrication machinery and automation controls Ability to read electrical drawings and schematics Strong problem-solving skills Knowledge of safety protocols and electrical standard

Rooftop Solar Project Execution | Project Management Tools (MS Project, Zoho Projects, Primavera) | Client and Vendor Management | Cost and Schedule Control | Site Safety and Quality Standards | Team Building and Leadership | Excellent communication (English & Hindi) Experience Required: 1218 years (minimum 6 years in rooftop solar projects) Industry Preference: Solar EPC / Renewable Energy / Power / Infrastructure Role Overview: SunShell Power is looking for a dynamic and experienced General Manager Projects to lead the end-to-end execution of rooftop solar projects across India. The role involves cross-functional coordination with design, procurement, site execution, safety, and client management teams. You will be accountable for delivering projects on time, within budget, and at the highest quality and safety standards. Key Responsibilities: Project Planning & Execution: Oversee the complete project lifecycle: post-order finalization, site survey, BOQ finalization, installation, commissioning, and handover. Develop and manage project execution schedules, resource planning, and daily monitoring. Ensure project delivery timelines are met with high standards of quality and compliance. Team Leadership: Lead a team of Project Managers, Site Engineers, Supervisors, and Contractors. Establish clear SOPs and assign project-specific roles, responsibilities, and deliverables. Conduct performance reviews and support skill development within the team. Client & Stakeholder Coordination: Liaise with PSU and industrial clients for project updates, approvals, and inspections. Manage coordination with DISCOMs for net metering and synchronization. Handle escalations and maintain client satisfaction through clear communication and timely resolution. Budgeting & Cost Control: Track project budgets, cost variations, and actual vs. estimated margins. Approve procurement needs and vendor quotes in line with project requirements. Vendor & Contractor Management: Identify and manage contractors for civil, electrical, and structural work. Evaluate contractor performance and enforce contractual compliance. Quality, Safety & Compliance: Ensure all work complies with MNRE/DISCOM/state nodal agency guidelines. Conduct site safety audits and implement corrective measures for compliance with safety standards. Documentation & Handover: Ensure timely submission of project documentation including DPRs, test reports, drawings, warranties, and completion certificates. Ensure smooth transition to O&M post commissioning. Qualifications: B.E./B.Tech in Electrical / Mechanical / Civil / Renewable Energy PMP / Prince2 / ISO Certifications in Project Management are preferred Strong working knowledge of MNRE, SECI, and state policies on rooftop solar

Key Deliverables: Lead Generation Generate leads through interactions with DSE or through channel partners/open market. Customer Relationship Management End to end customer relationship management including explaining product offerings and resolving sales queries. Cross-selling product offerings to customers. Educates customers with information to build their understanding of issues and capabilities. Goes beyond their day-to-day work to assist customers in a positive manner. Dealer Relationship Management Maintaining relationship with assigned dealer. Deal Processing Collecting all pre-sanction and post sanction documents and performing accurate data entries (RSPM, SAGE etc) Internal Stakeholder Management Interact with operations and credit team in order to ensure smooth processing of loan application. Education Qualification: Only Graduate Specialized job competencies: Functional Competencies Communication Skill Negotiation Skill Market/Industry Knowledge Analytical Skill Product Knowledge Functional Competencies Communication Skill Negotiation Skill Market/Industry Knowledge Analytical Skill Product Knowledge Hiring Parameters: Candidates from Finance graduate stream preferred. Should be comfortable to move in the market. Should have learning attitude

Key Objective of the Job: A CRE who effectively manage DSE interactions, channel partners and the open market. BDMs responsibilities also include to collaborate with internal stakeholders, including operations & credit teams to ensure efficient loan application processing. Key Deliverables: Lead Generation Generate leads for ILSCV deals through interactions with DSE or through channel partners/open market. Customer Relationship Management End to end customer relationship management including explaining product offerings and resolving sales queries. Cross-selling product offerings to customers. Educates customers with information to build their understanding of issues and capabilities. Goes beyond their day-to-day work to assist customers in a positive manner. Dealer Relationship Management Maintaining relationship with assigned dealer. Deal Processing Collecting all pre-sanction and post sanction documents and performing accurate data entries (RSPM, SAGE etc) Internal Stakeholder Management Interact with operations and credit team in order to ensure smooth processing of loan application. Education Qualification: Undergraduate/Graduate in any stream. Commerce Graduate preferred. Specialized job competencies: Functional Competencies Communication Skill Negotiation Skill Market/Industry Knowledge Analytical Skill Product Knowledge Behavioral Competencies Execution Excellence Customer Centricity Hiring Parameters: Candidates from commerce graduate stream preferred. Should be comfortable to move in the market. Should have learning attitude. Should have bike and license. Good knowledge of RTO (UV) Should have Product Knowledge (UV)

Good sound in LT , PT , TT & RTD Weigh scales & Filling stations. Pneumatic ON/OFF valves & Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

Be accessible for escalation of all FM related issues Ensure planning and execution of all preparation required for Conferences / meetings of the client as well as VIP visits scheduled during the shiftTake rounds and ensure high standards of housekeeping and upkeep Oversee the Housekeeping Services Overall, service delivery assessment of HK vendor Coordination meetings with vendor for resolution of service issues Overall coordination with all service providing vendors Take rounds of the facility regularly to identify issues in Housekeeping, Maintenance, Cafeteria etc and initiate immediate rectification actions Prepare weekly shift rosters for Helpdesk, Front Desk and Mailroom and communicate in advance to the staff and transport division

Sodexo Food Solutions India Pvt. Ltd. is looking for Technician - Electrical to join our dynamic team and embark on a rewarding career journey Good sound in LT , PT , TT RTD Weigh scales Filling stations. Pneumatic ON/OFF valves Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

Good sound in LT , PT , TT RTD Weigh scales Filling stations. Pneumatic ON/OFF valves Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

Good sound in LT , PT , TT RTD Weigh scales Filling stations. Pneumatic ON/OFF valves Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

To take care of the Operations and Maintenance of the pre-decided premises. Key Responsibilities: Daily Inspection to the area of responsible to check the Healthy and normal working condition of the Equipments. Maintenance and operation of Transformer, Chiller, Diesel Generator, UPS and Firefighting system. Daily Reporting the condition of site and other details like Energy, Diesel and water consumption to the next level (Facility Engineer). Allocation of the work to the technicians and monitoring it. Energy management (Power, Diesel and water). Tracking the complaint record and taking the necessary action to resolve it Asap. Tracking of PM seclude and get it done by the team/Vendor within the Due Date. Ensure Day to day maintenance activities has to be carried out. Periodically 5s activities and Kaizen to be implement at site and need to follow with respective team members. Updating the completion of work allotted to the Next level. Tracking the SSDs to ensure the completion at the earliest. Following up the work completed/work in progress details to the next shift. Reading of Supervisor/Technician log book to understand the previous Day/Shift work. Preparation of Daily, weekly and monthly report, Shift schedule, PM checklist etc. Monitor and maintain the minimum diesel stock in DG day tank in HSD yard. Monitor the HSD yard pit dewatering pump during rain for proper operation and pumping out of water in case of any problem escalate to engineer for taking further action. Check the either technicians are maintaining the air conditioning system like suction pressure, discharge pressure, chiller water temperature etc. and verify the reading books Check the either AC team maintain the temperature properly like in workstation area 23 C + or 2, UPS room & server rooms shall be maintain 22 c + or 1 c, if incase any problem in the AC escalate to the engineer for rectification the problems. Monitor the DG set shall not be operated below 35% and above 85% of load, verify 1500KVA Min load 730 Amps and Max load 1774 Amps. Monitor and observe the Electrical technicians while power failure time and during emergency one DG set to be switched ON as well as proper change overs. Shall monitor whether technicians are taking readings or inspections every one hour in HT yard, if in case of any deviation inform to engineers. Check the Technicians are maintaining the Transformer readings & condition monitoring, in case any abnormalities inform to engineer for taking further action. Observe the either technicians are taking readings voltage. Current, PF etc. and check the log books are maintaining properly. Observe the PF system shall be maintained 0.99 to avoid and ensure optimum utilization of maximum demand. Hand over the shift through proper documentation and follow ups next shift Supervisors Any additional activities or duties defines needs to be performed and reported back to the Site Manager or the concern HODs"

To ensure the site is functioning smoothly. Key Responsibilities: Perform highly skilled maintenance, installation, repair, and troubleshooting work involved with electrical systems. Electrical work may be performed in a number of areas including heating, refrigeration, motors, fire alarms, and generator equipment. Work involves the technical application of electrical principles. Install, test, inspect, maintain, service, and repair lighting fixtures, electrical panels, outlets, wiring, specialized electrical equipment, and machinery. Operate power hand tools and other specialized electrical equipment. Construct and maintain service equipment. Read electrical circuit diagrams. Requisition materials and supplies from stockroom, call vendors to discuss needs for parts and supplies, and recommend purchases and suppliers. Transfer primary power from one power source to another. Install conductors, splice cable, build terminations, and perform necessary hookups for primary power lines. Set poles, string overhead lines, and perform overhead line maintenance. Lay underground conduit for electrical lines and install low voltage electric lines and conduit for telephone systems. Perform other trades work incidental to electrical work as required. Qualifications: ITI Certificate or PWD License Ability to read blueprints Good communication skills Ability to troubleshoot related systems Pro-active Disciplined Organized Service-oriented attitude

To ensure the site is functioning smoothly. Key Responsibilities: Perform highly skilled maintenance, installation, repair, and troubleshooting work involved with electrical systems. Electrical work may be performed in a number of areas including heating, refrigeration, motors, fire alarms, and generator equipment. Work involves the technical application of electrical principles. Install, test, inspect, maintain, service, and repair lighting fixtures, electrical panels, outlets, wiring, specialized electrical equipment, and machinery. Operate power hand tools and other specialized electrical equipment. Construct and maintain service equipment. Read electrical circuit diagrams. Requisition materials and supplies from stockroom, call vendors to discuss needs for parts and supplies, and recommend purchases and suppliers. Transfer primary power from one power source to another. Install conductors, splice cable, build terminations, and perform necessary hookups for primary power lines. Set poles, string overhead lines, and perform overhead line maintenance. Lay underground conduit for electrical lines and install low voltage electric lines and conduit for telephone systems. Perform other trades work incidental to electrical work as required. Qualifications: ITI Certificate or PWD License Ability to read blueprints Good communication skills Ability to troubleshoot related systems Pro-active Disciplined Organized Service-oriented attitude

To assist in the smooth running of the warehouse operation ensuring that the business needs and targets are met on a daily basis by providing effective mechanical / electrical maintenance support. Key Responsibilities : To carry out all physical and visual checks on site machinery as required Driving of fork lift truck equipment as required To clean & lube shafts, bearings, door catches, chains, pushers as required To check and tighten chain tensions, PECS, drain glue filters, slides and bearings Attend to machine breakdowns and solve/diagnose any mechanical / electrical failures To carry out system checks as required Conduct weekly testing of emergency generator and fire pumps (sprinkler system) To update spares list and monitor stock levels To replace heat wire and heat strips on shrink machine and conduct routine maintenance as required Undertake all duties safely and in accordance with Company Health & Safety policy and practice Provide accurate information and regular progress updates as required by management Liase with both internal and external customers Undertake such duties considered essential for the effective operation of the warehouse Undertake any training as required and ensure working knowledge is kept current Keep accurate records of all testing, checks, observations as required KEY ATTRIBUTES: A keen eye and methodical approach to detail Presentable in appearance and attitude promoting a professional image of the Book People at all times Flexible in regards to working arrangements and operational changes Excellent communication skills A high standard of health and safety at work and an ability to apply that knowledge practically Computer literate QUALIFICATIONS Entry Level ONC Mechanical or Electrical Engineering Grade 1 Working towards an HNC in Mechanical or Electrical Engineering Grade 2 HNC in Mechanical or Electrical Engineering Grade 3 Higher National Diploma in Engineering On-going professional development and/or training as required for the safe and effective working in the role of Maintenance Engineer.

To assist in the smooth running of the warehouse operation ensuring that the business needs and targets are met on a daily basis by providing effective mechanical / electrical maintenance support. Key Responsibilities : To carry out all physical and visual checks on site machinery as required Driving of fork lift truck equipment as required To clean & lube shafts, bearings, door catches, chains, pushers as required To check and tighten chain tensions, PECS, drain glue filters, slides and bearings Attend to machine breakdowns and solve/diagnose any mechanical / electrical failures To carry out system checks as required Conduct weekly testing of emergency generator and fire pumps (sprinkler system) To update spares list and monitor stock levels To replace heat wire and heat strips on shrink machine and conduct routine maintenance as required Undertake all duties safely and in accordance with Company Health & Safety policy and practice Provide accurate information and regular progress updates as required by management Liase with both internal and external customers Undertake such duties considered essential for the effective operation of the warehouse Undertake any training as required and ensure working knowledge is kept current Keep accurate records of all testing, checks, observations as required KEY ATTRIBUTES: A keen eye and methodical approach to detail Presentable in appearance and attitude promoting a professional image of the Book People at all times Flexible in regards to working arrangements and operational changes Excellent communication skills A high standard of health and safety at work and an ability to apply that knowledge practically Computer literate QUALIFICATIONS Entry Level ONC Mechanical or Electrical Engineering Grade 1 Working towards an HNC in Mechanical or Electrical Engineering Grade 2 HNC in Mechanical or Electrical Engineering Grade 3 Higher National Diploma in Engineering On-going professional development and/or training as required for the safe and effective working in the role of Maintenance Engineer.

Sodexo Food Solutions India Pvt. Ltd. is looking for Assistant Technician to join our dynamic team and embark on a rewarding career journey To ensure the site is functioning smoothly. Key Responsibilities: Perform highly skilled maintenance, installation, repair, and troubleshooting work involved with electrical systems. Electrical work may be performed in a number of areas including heating, refrigeration, motors, fire alarms, and generator equipment. Work involves the technical application of electrical principles. Install, test, inspect, maintain, service, and repair lighting fixtures, electrical panels, outlets, wiring, specialized electrical equipment, and machinery. Operate power hand tools and other specialized electrical equipment. Construct and maintain service equipment. Read electrical circuit diagrams. Requisition materials and supplies from stockroom, call vendors to discuss needs for parts and supplies, and recommend purchases and suppliers. Transfer primary power from one power source to another. Install conductors, splice cable, build terminations, and perform necessary hookups for primary power lines. Set poles, string overhead lines, and perform overhead line maintenance. Lay underground conduit for electrical lines and install low voltage electric lines and conduit for telephone systems. Perform other trades work incidental to electrical work as required. Qualifications: ITI Certificate or PWD License Ability to read blueprints Good communication skills Ability to troubleshoot related systems Pro-active Disciplined Organized Service-oriented attitude

To ensure the site is functioning smoothly Key Responsibilities Perform skilled, complex work in the repair, maintenance and installation of heating, ventilating, air conditioning and steam distribution equipment and systems Operate a variety of equipment as needed to perform work Install, maintain and repair computerized electronic pneumatic devices related to HVAC control Operate various measuring and testing instruments Requisition materials from stockroom and controls storage of materialsMaintain electronic / pneumatic testing equipment Call and work with vendors to arrange service for warranted parts, selectappropriate replacement parts and trouble shoot problems Read blueprints, piping and wiring diagrams Perform brazing, soldering, pipefitting and welding Maintain underground steam distribution system through repair and / or replacement of parts Estimate time and materials required on work orders Perform preventive maintenance on related equipment assigned by the Supervisor/Manager Maintain work area and equipment in a clean and orderly condition following all prescribed regulations Attend all scheduled staff training and safety meetings

Ensure completion of all schedules and capturing of abnormalities through Schedule monitoring during their watch. Suggesting on Purchase of electrical material as required to Executive technical Maintaining correct tool procedure Responsibilities Read the log book. Check the HSD tank level note down in the log book. Check the LTPCC feeders. And DGs Auto/manual positions Check the all relay position tap changer position. Check up the DG set water level, oil level and check up the specific gravity of battery (weekly once). Battery condition to be monitored. Check up the Transformer oil level (Oil temp, Winding temp, silica gel color) Record the readings twice in shift. Run D.G. on idle run daily once. Check up the capacitor bank always to maintain the unity. Note down the P.F readings in the log book. In 2nd shift at 6pm switch on the utility lights, Chiller plant, out side street lights and total plant lighting operation trouble shooting. Carry out the PM schedules /break downs works rectification on that day programs. Ensure that log sheets are up dated in the same time.

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems