3013 Electrical Maintenance Jobs - Page 39

Complete knowledge of Motor Repairing, throttle. Repairing, IG switch & operating multiple calibration instrument Promptly analyze & resolve development issue & field issues Responsible for service & Repair in the company Required Candidate profile Must have experience in field services after market Should be Polytechnic(2 yr) ITI Electronics, Electrical

Knowledge of Electrical Circuit. Knowledge of Hydraulic Circuit Utility Maintenance (Air Compressor, DG Sets, Transformer) Knowledge of PLC Programming Alll type audit documents (VSA, ISO, IATF) BLOW Moulding & Injection Moulding Required Candidate profile Know about BLOW Moulding & Injection Moulding Maintenance

Documents, PLC Programing/fault finding CRCM Knowledge of Hydraulic, Pneumatic Preventive maintenance Predictive maintenance. Spare Management , OTC Robot , PLC HMI Programming

Strong technical knowledge in Service of Electrical/Diesel systems. Excellent troubleshooting problem-solving abilities. Training and customer interaction, commissioning & installation. Performing maintenance and repairs during Service AMC contracts. Required Candidate profile ITI in Electrical/Diesel Mechanic/Dip in Engg Minimum 5 years of experience with a private limited company (Contractor experience will not be considered) Traveling extensively, with 20+ days of travel

Installation: Install heating, ventilation, air conditioning, and refrigeration systems in new construction projects or existing buildings. Follow blueprints, specifications, and local building codes to ensure proper installation and functionality. Maintenance: Perform routine maintenance tasks, including cleaning, lubricating, and inspecting HVAC/R systems and components. Replace filters, belts, motors, and other worn or damaged parts as needed to ensure optimal performance and energy efficiency. Repair: Diagnose and troubleshoot HVAC/R systems to identify malfunctions, leaks, or performance issues. Repair or replace defective components, such as compressors, coils, thermostats, and valves, using hand tools, power tools, and specialized equipment. System Optimization: Calibrate controls, adjust settings, and fine-tune HVAC/R systems to maximize efficiency, comfort, and performance. Recommend upgrades or modifications to improve system reliability and energy efficiency. Refrigerant Handling: Handle, recover, recycle, and recharge refrigerants in compliance with EPA regulations and industry best practices. Ensure proper handling and disposal of refrigerants to prevent environmental contamination and comply with safety standards. Customer Service: Interact with customers, building owners, and property managers to assess their HVAC/R needs, provide recommendations, and address concerns. Communicate effectively and professionally to build positive relationships and ensure customer satisfaction. Safety Compliance: Follow safety protocols, guidelines, and regulations to prevent accidents, injuries, and property damage during HVAC/R installation, maintenance, and repair activities. Use personal protective equipment (PPE) and adhere to safety procedures at all times. Documentation: Maintain accurate records of HVAC/R service calls, inspections, repairs, and maintenance activities. Document equipment readings, test results, and recommendations for future reference and compliance purposes.

Operate, monitor, and maintain HT equipment including transformers, RMUs, VCBs, and HT panels. Conduct routine inspections of HT substations and switchgear. Respond to electrical faults and perform corrective actions efficiently. Maintain proper load balancing and monitor voltage/current levels. Ensure compliance with electrical safety regulations and protocols. Coordinate with utility service providers during outages or maintenance. Maintain logs of operations, faults, maintenance schedules, and load readings. Support preventive maintenance and breakdown servicing of electrical systems.

Installation: Install and connect electrical systems, wiring, circuits, and components according to design specifications and electrical codes. Maintenance and Repairs: Perform routine maintenance tasks and troubleshoot electrical systems to identify and fix faults or malfunctions. Testing and Inspection: Conduct tests to ensure proper functioning of electrical systems and equipment, including using testing tools like multimeters and circuit testers. Circuitry and Wiring: Read and interpret electrical schematics, diagrams, and blueprints to understand circuitry and wiring layouts. Equipment Operation: Operate, maintain, and repair various electrical equipment such as motors, generators, transformers, and control systems. Safety Compliance: Adhere to safety regulations and protocols to ensure a safe working environment and prevent electrical hazards. Documentation: Maintain records of maintenance activities, repairs, and installations for documentation and future reference.

Installation: Install and connect electrical systems, wiring, circuits, and components according to design specifications and electrical codes. Maintenance and Repairs: Perform routine maintenance tasks and troubleshoot electrical systems to identify and fix faults or malfunctions. Testing and Inspection: Conduct tests to ensure proper functioning of electrical systems and equipment, including using testing tools like multimeters and circuit testers. Circuitry and Wiring: Read and interpret electrical schematics, diagrams, and blueprints to understand circuitry and wiring layouts. Equipment Operation: Operate, maintain, and repair various electrical equipment such as motors, generators, transformers, and control systems. Safety Compliance: Adhere to safety regulations and protocols to ensure a safe working environment and prevent electrical hazards. Documentation: Maintain records of maintenance activities, repairs, and installations for documentation and future reference.

Assist engineers in designing, testing, and implementing electrical systems. Perform routine inspections and maintenance on electrical equipment. Troubleshoot electrical issues and repair faulty wiring or components. Maintain records of electrical testing, calibrations, and repairs. Install electrical systems in compliance with technical specifications and safety standards. Work with engineering teams to ensure system efficiency and reliability.

Role & responsibilities Responsible for operation and maintenance of all utility. Responsible for optimum energy consumption. Responsible for operation and maintenance of machines and equipments in utility area. Responsible for preventive and predictive maintenance of machines and equipments in Utility Area. Responsible for personnel and machine safety. To follow SOP’s. To maintain GMP and cleanliness of utility area. To maintain & Monitoring EMS Practices & its Documents. To maintain facility and equipment’s in good condition. Responsible for maintaining inventory cost in budget. Creation, Actualization, documentation and implementation of energy program (energy goals) Annual preparation and assessment of energy aspects, creation of EnPIs, determination of important energy aspects. Periodic determination of current applicable requirements referring to energy law. Training & Information to staff for optimization of energy consumption. Implementation of energy policy & energy goals. Responsible for Continual Improvement of energy management system. Responsible for acting as Special Job Controller in case of emergency. Monitor & Implement EMS practices for disposal of waste and documentation. Ensures that all the EMS, Energy and OHSAS requirements as per legal register. Identifying the significant environmental aspects and significant OHS hazards through Environment aspect. Impact analysis and risk assessment process for all the activities of the department and Maintain the same in aspect and HIRA register. To monitor data of DPMS and DLSS. To monitor and control of HVAC system operation. Authority: To participate in safety committee. To participate in conservation of resources. To stop any unsafe activity. To participate in reviewing the Quality & Environmental and Occupational Health and Safety And Energy Management System. To authorize work permit in absence of Safety Officer. To prepare purchase requisition, purchase requisition. To ensure regulatory compliance. To initiate & assignee for Change Control & deviation To Provide Necessary resources Like (staff resources, Device & other Resources) as far as required for EnMS. To conduct internal audits as per EMS, OHSMS and EnMS standards requirements. To coordinate with vendor and QA for HVAC re-validations & co-ordination for calibration. Preferred candidate profile Work Experience in Injectable

Seeking a dynamic and experienced Line Engineer Electrical & Electronics Maintenance to join its Maintenance team at the Bharuch Plant. The ideal candidate will have strong technical expertise in preventive and breakdown maintenance, particularly in CNC machines, PLC systems, utilities, and material handling equipment within a manufacturing or engineering environment. PLC Maintenance: Allen Bradley Control Logix & SLC Drives & CNCs: AC/Servo Drives, Siemens CNC 802D/810D/840D Vision Systems: Camera-based systems with VB.NET, MS Access Instrumentation: Calibration & parameterization of process controllers (Temp, CP) Mechanical Systems: Knowledge of hydraulics, pneumatics, and machine cycle diagrams Utility Systems: Power distribution, lighting, compressors, RO/DM water, etc. Material Handling Equipment: Forklifts, conveyors, overhead cranes, etc. Diploma in Electrical and Electronics with 2-5 Yrs. experience in Automotive, Bearing, Engineering Sector. CRB/SRB experience preferred.

Seeking an experienced professional (5+ yrs) to manage MEP & structural detailing, single-line/coordinated layouts, electrical cabling, and compliance. Must be proficient in AutoCAD/Revit with strong team coordination skills. Engg. diploma/degree required.

We are looking for a skilled Maintenance Executive with an ITI in Electrical and 3–5 years of experience in industrial or kitchen equipment maintenance. The position is based out of our Bhiwandi base kitchen.

Role & responsibilities : Site Engineer,Tech Park Maintenance Preferred candidate profile : Site Engineer, Tech Park Maintenance

Role & responsibilities The Maintenance Junior Engineer is responsible for supporting the smooth operation of all machinery and utility systems by performing scheduled and unscheduled maintenance activities. This role ensures machine reliability and operational efficiency while maintaining compliance with quality and safety standards. Breakdown Maintenance: Respond promptly to equipment breakdowns to minimize downtime. Troubleshoot and repair mechanical, electrical, or control issues on production and utility equipment. Preventive Maintenance: Execute preventive maintenance activities as per the approved maintenance schedule. Ensure timely servicing and part replacement to prevent unexpected equipment failures. Weekly Equipment Checks: Conduct routine weekly inspections of all shop floor machines. Identify signs of wear, misalignment, or malfunction, and report or resolve issues as needed. Utility Equipment Maintenance and Operation: Operate and maintain utility systems such as air compressors, chillers, boilers, and HVAC systems. Monitor performance and ensure reliable operation of all utilities supporting production. Documentation and Compliance: Maintain accurate and up-to-date maintenance logs, checklists, and ISO documentation. Ensure all activities are compliant with ISO and internal quality standards. Plant Maintenance: Assist in maintaining overall plant infrastructure including lighting, plumbing, ventilation, and civil structures.

The Technician will be actively involved the installation Mechanical completion of Wind Turbine Generators (WTGs) in timely manner Receiving and offloading all major components Prep, locating, lifting and installation of major WTGcomponents Installing loose components for Nacelle, hub, and towerpreparation Connecting blades to hub, Rotor prep and installation Hub prep and staging, blade lifting, handling and torquing Rotor prep and installation Complete all service reports and associated documentation ona daily basis Complete and have signed off daily work sheets by yoursupervisor / manager Reporting opportunities for continuous improvement Wear the appropriate Personal Protective Equipment (PPE) Identify required tools and parts for each assigned work andconduct re-certification of equipment and tools Responsible to check availability of all required tools andparts prior actual work day, participate toolbox and daily work team briefings Observing all work instructions, procedures, safety codes ofpractice, employer OHS and Environmental requirements and statutory rulesand regulations. Requirements Have an in depth understanding of the different components of the wind turbine including the electrical pitch system to complete the Installation and MCC Ability and willingness to work on weekends, public-vacation, shift-work or on-call duty as required; Ability to influence others and lead small teams; Willing to train others as applicable; Competent in Health and Safety standards (EHS); Strong interpersonal and leadership skills; Effective problem identification and solution skills; Ability and willingness to climb Wind Turbines; 3-4 years in Construction Wind in any OEM; Strong understanding of Wind Turbine construction. Minimum Educational Qualification Diplomain a related discipline from an accredited university, institution / ITI

Role & responsibilities 1. Engineering Maintenance & Reliability Ensure efficient preventive, predictive, and breakdown maintenance of all plant equipment and utilities. Lead cross-functional engineering teams to achieve zero unplanned downtime and maximum equipment uptime. Implement root cause analysis and continuous improvement in maintenance practices. 2. Utilities Management Manage all utility systems (boilers, chillers, HVAC, air compressors, cooling towers, etc.) to ensure uninterrupted supply to manufacturing. Drive energy e iciency and utility optimization initiatives across the plant. 3. Instrumentation & Automation Ensure calibration, maintenance, and performance of critical instrumentation and process control systems. Work with cross-functional teams to support automation and control upgrades. 4. Engineering Stores Oversee stores management for engineering spares and consumables with optimal inventory levels. Ensure availability of critical spares and compliance with GMP documentation requirements. 5. Budgeting & Capex Management Prepare and manage annual engineering budget (Opex & Capex) for maintenance, projects, and utilities. Plan and execute Capex projects related to facility upgrades, new installations, expansions, and regulatory requirements. Ensure cost control, vendor coordination, procurement support, and timely project execution. 6. Compliance & Safety Ensure compliance with cGMP, GEP, statutory norms (Factory Act, Electrical safety, Boiler Act, etc.), and EHS requirements. Lead readiness for internal and external audits including USFDA, EDQM, WHO, and other regulatory agencies. Implement engineering controls to enhance safety and environment performance. 7. People Management Lead and develop a high-performing engineering team. Identify training needs, performance development, and succession planning. Preferred candidate profile Educational Qualification: Full-time B.E / B.Tech in Mechanical / Electrical / Instrumentation Engineering (Mandatory) Industry Preference: Candidates must be from API / Bulk Drug Manufacturing environment Experience: 18+ years in Engineering, with at least 5 years in a leadership role

Minimum 3 Years of experience in EHV Substation Maintenance Maintenance, repair & operation of highvoltage electrical equipment Routine inspection, diagnostic testing & repairs on highvoltage equipment like transformers, circuit breakers & switchgear

As a Multi-Skilled Technician, you will play a key role in performing a variety of maintenance, repair, and technical tasks across different disciplines This role requires versatility, technical expertise, and the ability to troubleshoot and solve problems efficiently Key Responsibilities: Maintenance and Repairs:Conduct routine maintenance tasks for facilities, equipment, and machinery Diagnose and repair mechanical, electrical, plumbing, and other technical issues Equipment Installation:Install and set up new equipment, machinery, or systems Ensure proper calibration and functionality of installed equipment Troubleshooting:Identify and troubleshoot issues in a timely and efficient manner Perform root cause analysis to prevent recurring problems Cross-Disciplinary Skills:Possess skills in multiple technical areas, including but not limited to electrical, HVAC, plumbing, and carpentry Adapt to various technical challenges and acquire new skills as needed Safety Compliance:Adhere to safety protocols and guidelines during all maintenance and repair activities Conduct safety inspections and report any hazards Record Keeping:Maintain accurate records of maintenance activities, repairs, and equipment installations Document any parts or materials used during maintenance Collaboration:Collaborate with other technicians and team members to address complex technical issues Communicate effectively with different departments to coordinate maintenance schedules Continuous Improvement:Recommend improvements to existing systems and processes to enhance efficiency Stay informed about advancements in technology and industry best practices Qualifications: High school diploma or equivalent Technical certification or apprenticeship in a relevant field Proven experience in multi-skilled maintenance or technician roles

As a Multi-Skilled Technician, you will play a key role in performing a variety of maintenance, repair, and technical tasks across different disciplines This role requires versatility, technical expertise, and the ability to troubleshoot and solve problems efficiently Key Responsibilities: Maintenance and Repairs:Conduct routine maintenance tasks for facilities, equipment, and machinery Diagnose and repair mechanical, electrical, plumbing, and other technical issues Equipment Installation:Install and set up new equipment, machinery, or systems Ensure proper calibration and functionality of installed equipment Troubleshooting:Identify and troubleshoot issues in a timely and efficient manner Perform root cause analysis to prevent recurring problems Cross-Disciplinary Skills:Possess skills in multiple technical areas, including but not limited to electrical, HVAC, plumbing, and carpentry Adapt to various technical challenges and acquire new skills as needed Safety Compliance:Adhere to safety protocols and guidelines during all maintenance and repair activities Conduct safety inspections and report any hazards Record Keeping:Maintain accurate records of maintenance activities, repairs, and equipment installations Document any parts or materials used during maintenance Collaboration:Collaborate with other technicians and team members to address complex technical issues Communicate effectively with different departments to coordinate maintenance schedules Continuous Improvement:Recommend improvements to existing systems and processes to enhance efficiency Stay informed about advancements in technology and industry best practices Qualifications: High school diploma or equivalent Technical certification or apprenticeship in a relevant field Proven experience in multi-skilled maintenance or technician roles

Job Summary: We are seeking a skilled and motivated Mechanical/Electrical and Instrumentation Technician to join our maintenance and operations team. The technician will be responsible for the installation, maintenance, troubleshooting, and repair of mechanical systems, electrical equipment, and instrumentation/control systems to ensure maximum plant efficiency and reliability. Key Responsibilities: Mechanical Duties: Perform routine maintenance and troubleshooting on pumps, motors, valves, compressors, gearboxes, and other mechanical systems. Align and balance rotating equipment using appropriate tools and techniques. Read and interpret mechanical drawings, manuals, and specifications. Participate in equipment overhauls and preventive maintenance programs. Electrical Duties: Install, maintain, and troubleshoot electrical systems including motors, switchgear, lighting, and power distribution panels. Conduct testing, calibration, and inspection of electrical equipment to ensure compliance with safety and operational standards. Interpret electrical schematics, wiring diagrams, and single-line diagrams. Instrumentation & Control Duties: Calibrate, maintain, and repair field instruments including pressure, temperature, flow, and level transmitters. Maintain PLCs, HMIs, control loops, and signal wiring to ensure proper process control. Troubleshoot DCS/SCADA system components and communication networks. Support automation improvements and assist with commissioning of instrumentation systems. Interested candidates can apply or share their resume at richachopra@ghcl.co.in

Good sound in LT , PT , TT & RTD Weigh scales & Filling stations. Pneumatic ON/OFF valves & Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

Good sound in 1.LT , PT , TT & RTD 2. Weigh scales & Filling stations. 3. Pneumatic ON/OFF valves & Control valves 4.LT,PT calibration. 5.Basic knowledge in troubleshooting PLC. 6.Foundation field bus knowledge.

Sodexo Food Solutions India Pvt. Ltd. is looking for Technician - Electrical to join our dynamic team and embark on a rewarding career journeyGood sound in LT , PT , TT RTD Weigh scales Filling stations. Pneumatic ON/OFF valves Control valves LT,PT calibration. Basic knowledge in troubleshooting PLC. Foundation field bus knowledge.

Responsible for overall site management and delivery of all the SOWs under the IFM contract Manage the AMC services through the AMC vendors contracted by Sodexo Support operations by managing the Mechanical, Electrical, Plumbing installations & civil maintenance within the facility; Responsible for preparation of critical spares list for all installations as per manufacturers recommendations and plan for the inventory where the maintenance is carried out with in-house teams; Implement and oversee the preventive maintenance program to reduce the risk of sudden failures of critical equipment; Review the maintenance/service practices of M&E Contractors to deliver quality work practices in line with the manufacturer recommendations; Maintain the logbooks, checklists and PPM schedules for all M & E installations as per the site conditions; Manage Downtime/ Breakdowns appropriately; Arrange for ad-hoc M&E setups as per the client requirement from time to time Ensure the contractors follow the in-house rules at all times and the projects are handled with minimum inconvenience to the Client Assume AFM Soft Services responsibilities if need arises Responsible to handle the shifts independently on all matters assigned; Reporting: Responsible for daily reporting on M & E to the Facility Manager Generate Service maintenance reports on office equipments; Generate Inventory and Purchasing of spares and consumables; Generate Downtime and breakdown incident reports Ensure the SLAs are being met without any deviation Ensure all compliances are met as per EHS, requirement Ensure Pos / Work orders, work permits are issued before starting any job Ensure power uptime 100% for critical equipments always Incidents to be reported as per the procedures and SLAs Take up and complete Energy Conservation projects and ensure targets are achieved Ensure the gap analysis reports are closed on priority Coordinate for internal modification works Coordinate for any Client visits / events Ensure compliance is 100% Validate the electricity bills and provide recommendations accordingly Provide appropriate data for MIS and any other reports as required Accountabilities Overall accountability in driving Technical operations and soft services at site Competencies : Diploma or BE in Electrical Contract Administration experience of 5 yrs or more desirable Very Good people skills and ability to interact with a wide range of client staff and demands Knowledge of Occupational Safety requirements Strong PC literacy and proven ability to manage daily activities using various systems 90% of SLAs are to be in green Demonstrated experience with continuous improvement initiatives highly desirable Demonstrated experience with client reporting and preparation of reports required