39425 Electrical Jobs - Page 36

Job Summary: The Safety Engineer shall be responsible for implementing, maintaining, and improving the organization's health and safety management system to ensure a safe working environment for all employees, contractors, and visitors. The role involves identifying hazards, assessing risks, developing and implementing safety procedures, conducting training, and ensuring compliance with all applicable safety regulations and standards. Key Responsibilities HSE Management System Implementation and Maintenance: Assist in the development, implementation, and maintenance of the organization's HSE management system (e.g., ISO 45001). Ensure compliance with all relevant national and state safety regulations (e.g., Factories Act, Occupational Safety, Health and Working Conditions Code). Develop and maintain HSE policies, procedures, and safe work practices. Conduct regular audits and inspections to verify compliance with HSE requirements. Maintain accurate HSE records and documentation. Hazard Identification And Risk Assessment Conduct Hazard Identification and Risk Assessments (HIRAs) for various activities and processes. Identify potential hazards related to machinery, equipment, tools, materials, and work processes. Evaluate the severity of potential injuries or illnesses and the likelihood of occurrence. Develop and implement risk control measures, following the hierarchy of control (elimination, substitution, engineering controls, administrative controls, and PPE). Ensure that risk assessments are reviewed and updated regularly. Safety Training And Awareness Develop and deliver safety training programs for employees and contractors. Conduct toolbox talks and safety meetings. Promote a strong safety culture through awareness campaigns and initiatives. Ensure that all personnel are aware of potential hazards and safe work practices. Provide training on the proper use of PPE. Incident Investigation And Reporting Investigate accidents, incidents, and near misses to determine root causes and contributing factors. Prepare detailed incident investigation reports with recommendations for corrective and preventive actions. Track and analyse incident statistics to identify trends and areas for improvement. Ensure that all incidents are reported to the appropriate authorities as required. Emergency Preparedness And Response Develop and implement emergency response plans and procedures. Conduct emergency drills and exercises. Ensure that first-aid facilities and trained personnel are available. Coordinate with external emergency services as needed. Site Safety Management Oversee safety activities at construction sites or industrial facilities. Ensure that contractors comply with the organization's safety requirements. Conduct site safety inspections and audits. Monitor and enforce safety regulations and permit-to-work systems. Manage site safety personnel. Liaison With Authorities Act as a liaison with regulatory agencies (e.g., Factory Inspectorate). Ensure that all required permits and licenses are obtained and maintained. Represent the organization in safety-related meetings and discussions. Qualifications Bachelor's degree in engineering (Mechanical, Electrical, Civil, Chemical, or related field) or a Bachelor's degree in Science with a Diploma in Industrial Safety. Diploma in Industrial Safety or equivalent qualification from a recognized institution (Mandatory). Minimum 2 years of relevant experience as a Safety Engineer in a construction or industrial environment. Strong knowledge of occupational health and safety regulations and standards in India. Excellent communication, interpersonal, and training skills. Strong analytical and problem-solving skills. Ability to work independently and as part of a team. Proficiency in MS Office Suite. Preferred Qualifications NEBOSH (National Examination Board in Occupational Safety and Health) certifications. ASP/CSP (Associate Safety Professional/Certified Safety Professional) or equivalent certifications. Experience in [Specific industry, e.g., solar, power, manufacturing]. Knowledge of environmental management systems (e.g., ISO 14001). First Aid and CPR certification. Skills Hazard Identification and Risk Assessment. Incident Investigation. Safety Training. Emergency Response Planning. HSE Management Systems. Knowledge of Safety Regulations. Communication Skills. Auditing Skills. Problem-Solving Skills.

Description Senior Relay Settings SCADA Engineer Permanent, Based from our office in Pune We are in search of a Senior Relay Settings Engineer to join our team in Pune. At Leidos , we deliver innovative solutions through the efforts of our diverse and talented people. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. As a Senior / Lead Relay Settings Engineer here at Leidos, you will: Leading project work for Major US utility clients Develop relay protection schemes using microprocessor-based relays to protect transmission and distribution assets. Perform protective device coordination for transmission lines, buses, transformers, capacitor banks, circuit breakers, and reactors. Develop logic settings to support desired relay schemes. Perform area protective device coordination studies. Develop system component modelling. Design and implement network communications for substations, ensuring secure and efficient data flow. Participate in internal and client-facing design discussions to ensure network designs meet project needs and work with electrical, protection, SCADA, and civil engineering teams to integrate network solutions into substations. About You Ideally you are degree qualified in a relevant engineering subject. 4+ years of experience in Relay settings work, preferably working with US based customers. Confident in leading projects and project teams, mentoring less experienced engineers and checking, revising and signing off work. Hands on experience with DNP3 protocol. Some knowledge of SCADA utility experience is preferred as is experience in programming GE D20 and Orion RTUs. Familiarization with SEL relays would be beneficial. Capable of preparing and verifying calculations using engineering formulas and skills or application specific software as required. Knowledge of PSS CAPE, CYME, ASPEN is preferred. What We Do Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. What You Can Expect From Us We take care of our employees. Leidos invests in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. So, how does all that sound? If you like what you’ve read, apply now and take the next step in your career with us! Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don’t wear capes (they’re a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it’s always been done.” Original Posting For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range Pay Range - The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Relay Settings SCADA Engineer Permanent, Based from our office in Pune We are in search of a Relay Settings Engineer to join our team in Pune. At Leidos , we deliver innovative solutions through the efforts of our diverse and talented people. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. As a Relay Settings Engineer here at Leidos, you will: Develop relay protection schemes using microprocessor-based relays to protect transmission and distribution assets. Perform protective device coordination for transmission lines, buses, transformers, capacitor banks, circuit breakers, and reactors. Develop logic settings to support desired relay schemes. Perform area protective device coordination studies. Develop system component modelling. Design and implement network communications for substations, ensuring secure and efficient data flow. Participate in internal and client-facing design discussions to ensure network designs meet project needs and work with electrical, protection, SCADA, and civil engineering teams to integrate network solutions into substations. About You Ideally you are degree qualified in a relevant engineering subject. 2+ years of experience in Relay settings work, preferably working with US based customers. Hands on experience with DNP3 protocol. Some knowledge of SCADA utility experience is preferred as is experience in programming GE D20 and Orion RTUs. Familiarization with SEL relays would be beneficial. Capable of preparing and verifying calculations using engineering formulas and skills or application specific software as required. Knowledge of PSS CAPE, CYME, ASPEN is preferred. What We Do Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. What You Can Expect From Us We take care of our employees. Leidos invests in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. So, how does all that sound? If you like what you’ve read, apply now and take the next step in your career with us! Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don’t wear capes (they’re a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it’s always been done.” Original Posting For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range Pay Range - The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Senior Substation Engineer Permanent, Based from our office in Pune We are in search of a Senior Substation Engineer / Protection and Control Engineer to join our team in Pune. At Leidos , we deliver innovative solutions through the efforts of our diverse and talented people. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. As a Senior Substation Engineer here at Leidos, you will be involved in: Leading project work for Major US utility clients Preforming Relay One Line Design Preparing Three-line Schematic design Relay DC schematic drawings for Bus, transformer, line, feeder protection. Panel front views. Develop Bill of Materials based on design criteria Developing point to point panel wiring drawings. Electrical site plan. Line arrangement. Control house layout. Developing section views of Line, bus arrangements, Control house. About You Ideally you are degree qualified in a relevant engineering subject. 4+ years of experience in a similar Senior / Lead Substation engineer / Protection and control engineering role, preferably working with US based customers. Good understanding of cable & conduit runs, voltage drop calcs, battery sizing, ground grid calculations, Lightning protection studies, lighting system, sizing calculations for station service (AC). Capable of preparing and verifying calculations using engineering formulas and skills or application specific software as required. Confident in leading projects and project teams, mentoring junior engineers and checking, revising and signing off work. What We Do Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. What You Can Expect From Us We take care of our employees. Leidos invests in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. So, how does all that sound? If you like what you’ve read, apply now and take the next step in your career with us! Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don’t wear capes (they’re a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it’s always been done.” Original Posting For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range Pay Range - The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Substation Engineer Permanent, Based from our office in Pune We are in search of a Substation Engineer / Protection and Control Engineer to join our team in Pune. At Leidos , we deliver innovative solutions through the efforts of our diverse and talented people. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. As a Substation Engineer here at Leidos, you will be involved in: Preforming Relay One Line Design Preparing Three-line Schematic design Relay DC schematic drawings for Bus, transformer, line, feeder protection. Panel front views. Develop Bill of Materials based on design criteria Developing point to point panel wiring drawings. Electrical site plan. Line arrangement. Control house layout. Developing section views of Line, bus arrangements, Control house. About You Ideally you are degree qualified in a relevant engineering subject. 2+ years of experience in a similar Substation engineer / Protection and control engineering role, preferably working with US based customers. Good understanding of cable & conduit runs, voltage drop calcs, battery sizing, ground grid calculations, Lightning protection studies, lighting system, sizing calculations for station service (AC). Capable of preparing and verifying calculations using engineering formulas and skills or application specific software as required. What We Do Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. What You Can Expect From Us We take care of our employees. Leidos invests in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. So, how does all that sound? If you like what you’ve read, apply now and take the next step in your career with us! Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don’t wear capes (they’re a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it’s always been done.” Original Posting For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range Pay Range - The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Skills: Automation, Electronics & Communication, Electrical, Instrumentation, Mechatronics, PLC Programming, SCADA, Industrial Automation, Department/Function: Sales Residence Engineer Location: Bharuch, Rajkot, Morbi, Gandhi Dham, Baroda, Vapi Reporting to (Name & Designation): Industry: Automation Minimum education qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field required: Total relevant experience Minimum 2 years Sales Manager No of reportees: Sales Team Roles & responsibilities: 1) Generate new leads utilising various resources Visit prospective and existing Customers to understand their automation and control requirements Select suitable automation, electrical, and other related products to suit control requirements Prepare techno-commercial offer together with BOM and System Architecture from selected products Negotiate offer with Customers and get order Co-ordinate with Project Engineering Team and Purchase Team to ensure smooth and timely execution of order Perform commercial formalities and ensure timely payment from Customers Set sales targets jointly with department head and strive to achieve them Do sales promotion activities with clients, like, OEMs, End Users, EPCs, Consultants, etc. Perform organisational working procedure on ERP System Minimum education Qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational Qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field Total relevant experience Required: Minimum 2 years Skills Required: Essential criterions for Selection: PLC Programming and Troubleshooting (Programmable Logic Controllers) HMI Configuration and Operation (Human Machine Interfaces) SCADA Systems Expertise (Supervisory Control and Data Acquisition) AC VFD Operation and Maintenance (Variable Frequency Job Description Drives) AC Servo System Handling (Servo Motors and Drives) Sensor Integration and Calibration Transmitter Configuration and Maintenance Control Device Programming and Application Automation Systems Troubleshooting Industrial Control Systems Knowledge Desirable but not essential Criteria For Selection: Preferred age group: 25-35 Years Target Industries/companies: Annual CTC: 4 to 5 lacs (No bar for right candidates)

Skills: Automation, Electronics & Communication, Electrical, Instrumentation, Mechatronics, PLC Programming, SCADA, Industrial Automation, Department/Function: Sales Residence Engineer Location: Bharuch, Rajkot, Morbi, Gandhi Dham, Baroda, Vapi Reporting to (Name & Designation): Industry: Automation Minimum education qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field required: Total relevant experience Minimum 2 years Sales Manager No of reportees: Sales Team Roles & responsibilities: 1) Generate new leads utilising various resources Visit prospective and existing Customers to understand their automation and control requirements Select suitable automation, electrical, and other related products to suit control requirements Prepare techno-commercial offer together with BOM and System Architecture from selected products Negotiate offer with Customers and get order Co-ordinate with Project Engineering Team and Purchase Team to ensure smooth and timely execution of order Perform commercial formalities and ensure timely payment from Customers Set sales targets jointly with department head and strive to achieve them Do sales promotion activities with clients, like, OEMs, End Users, EPCs, Consultants, etc. Perform organisational working procedure on ERP System Minimum education Qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational Qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field Total relevant experience Required: Minimum 2 years Skills Required: Essential criterions for Selection: PLC Programming and Troubleshooting (Programmable Logic Controllers) HMI Configuration and Operation (Human Machine Interfaces) SCADA Systems Expertise (Supervisory Control and Data Acquisition) AC VFD Operation and Maintenance (Variable Frequency Job Description Drives) AC Servo System Handling (Servo Motors and Drives) Sensor Integration and Calibration Transmitter Configuration and Maintenance Control Device Programming and Application Automation Systems Troubleshooting Industrial Control Systems Knowledge Desirable but not essential Criteria For Selection: Preferred age group: 25-35 Years Target Industries/companies: Annual CTC: 4 to 5 lacs (No bar for right candidates)

Skills: Automation, Electronics & Communication, Electrical, Instrumentation, Mechatronics, PLC Programming, SCADA, Industrial Automation, Department/Function: Sales Residence Engineer Location: Bharuch, Rajkot, Morbi, Gandhi Dham, Baroda, Vapi Reporting to (Name & Designation): Industry: Automation Minimum education qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field required: Total relevant experience Minimum 2 years Sales Manager No of reportees: Sales Team Roles & responsibilities: 1) Generate new leads utilising various resources Visit prospective and existing Customers to understand their automation and control requirements Select suitable automation, electrical, and other related products to suit control requirements Prepare techno-commercial offer together with BOM and System Architecture from selected products Negotiate offer with Customers and get order Co-ordinate with Project Engineering Team and Purchase Team to ensure smooth and timely execution of order Perform commercial formalities and ensure timely payment from Customers Set sales targets jointly with department head and strive to achieve them Do sales promotion activities with clients, like, OEMs, End Users, EPCs, Consultants, etc. Perform organisational working procedure on ERP System Minimum education Qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational Qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field Total relevant experience Required: Minimum 2 years Skills Required: Essential criterions for Selection: PLC Programming and Troubleshooting (Programmable Logic Controllers) HMI Configuration and Operation (Human Machine Interfaces) SCADA Systems Expertise (Supervisory Control and Data Acquisition) AC VFD Operation and Maintenance (Variable Frequency Job Description Drives) AC Servo System Handling (Servo Motors and Drives) Sensor Integration and Calibration Transmitter Configuration and Maintenance Control Device Programming and Application Automation Systems Troubleshooting Industrial Control Systems Knowledge Desirable but not essential Criteria For Selection: Preferred age group: 25-35 Years Target Industries/companies: Annual CTC: 4 to 5 lacs (No bar for right candidates)

Skills: Automation, Electronics & Communication, Electrical, Instrumentation, Mechatronics, PLC Programming, SCADA, Industrial Automation, Department/Function: Sales Residence Engineer Location: Bharuch, Rajkot, Morbi, Gandhi Dham, Baroda, Vapi Reporting to (Name & Designation): Industry: Automation Minimum education qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field required: Total relevant experience Minimum 2 years Sales Manager No of reportees: Sales Team Roles & responsibilities: 1) Generate new leads utilising various resources Visit prospective and existing Customers to understand their automation and control requirements Select suitable automation, electrical, and other related products to suit control requirements Prepare techno-commercial offer together with BOM and System Architecture from selected products Negotiate offer with Customers and get order Co-ordinate with Project Engineering Team and Purchase Team to ensure smooth and timely execution of order Perform commercial formalities and ensure timely payment from Customers Set sales targets jointly with department head and strive to achieve them Do sales promotion activities with clients, like, OEMs, End Users, EPCs, Consultants, etc. Perform organisational working procedure on ERP System Minimum education Qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational Qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field Total relevant experience Required: Minimum 2 years Skills Required: Essential criterions for Selection: PLC Programming and Troubleshooting (Programmable Logic Controllers) HMI Configuration and Operation (Human Machine Interfaces) SCADA Systems Expertise (Supervisory Control and Data Acquisition) AC VFD Operation and Maintenance (Variable Frequency Job Description Drives) AC Servo System Handling (Servo Motors and Drives) Sensor Integration and Calibration Transmitter Configuration and Maintenance Control Device Programming and Application Automation Systems Troubleshooting Industrial Control Systems Knowledge Desirable but not essential Criteria For Selection: Preferred age group: 25-35 Years Target Industries/companies: Annual CTC: 4 to 5 lacs (No bar for right candidates)

Company Description ROOTS Systems is a leading global manufacturer of oil-free Rotary Lobe Compressors, Process Gas Blowers, and Vacuum Booster packages for process applications, dating back to the 1930s. Our Duragas series complies with API 619 requirements, and we develop custom-designed packages to meet specific requirements from our facilities in the UK. We specialize in handling a wide range of gases and offer equipment compliant with international standards such as API, ASME, NEMA, and ATEX. Our network of local after-sales partners spans across the globe to ensure customer satisfaction. Role Description This is a full-time on-site role for a Project Engineer based in Tiruchirappalli. The Project Engineer will be responsible for managing and planning engineering projects, coordinating with relevant stakeholders, ensuring compliance with safety and industry standards, and overseeing project timelines. Day-to-day tasks include conducting site inspections, developing project plans, preparing technical documentation, and ensuring projects stay within budget and scope. Qualifications Project Engineering and Project Planning skills Electrical Engineering knowledge Excellent Communication skills Project Management experience Strong analytical and problem-solving abilities Ability to work effectively in a team environment Bachelor's degree in Engineering or related field Experience in the compressor or process gas industry is a plus

Skills: Automation, Electronics & Communication, Electrical, Instrumentation, Mechatronics, PLC Programming, SCADA, Industrial Automation, Department/Function: Sales Residence Engineer Location: Bharuch, Rajkot, Morbi, Gandhi Dham, Baroda, Vapi Reporting to (Name & Designation): Industry: Automation Minimum education qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field required: Total relevant experience Minimum 2 years Sales Manager No of reportees: Sales Team Roles & responsibilities: 1) Generate new leads utilising various resources Visit prospective and existing Customers to understand their automation and control requirements Select suitable automation, electrical, and other related products to suit control requirements Prepare techno-commercial offer together with BOM and System Architecture from selected products Negotiate offer with Customers and get order Co-ordinate with Project Engineering Team and Purchase Team to ensure smooth and timely execution of order Perform commercial formalities and ensure timely payment from Customers Set sales targets jointly with department head and strive to achieve them Do sales promotion activities with clients, like, OEMs, End Users, EPCs, Consultants, etc. Perform organisational working procedure on ERP System Minimum education Qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational Qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field Total relevant experience Required: Minimum 2 years Skills Required: Essential criterions for Selection: PLC Programming and Troubleshooting (Programmable Logic Controllers) HMI Configuration and Operation (Human Machine Interfaces) SCADA Systems Expertise (Supervisory Control and Data Acquisition) AC VFD Operation and Maintenance (Variable Frequency Job Description Drives) AC Servo System Handling (Servo Motors and Drives) Sensor Integration and Calibration Transmitter Configuration and Maintenance Control Device Programming and Application Automation Systems Troubleshooting Industrial Control Systems Knowledge Desirable but not essential Criteria For Selection: Preferred age group: 25-35 Years Target Industries/companies: Annual CTC: 4 to 5 lacs (No bar for right candidates)

Skills: Automation, Electronics & Communication, Electrical, Instrumentation, Mechatronics, PLC Programming, SCADA, Industrial Automation, Department/Function: Sales Residence Engineer Location: Bharuch, Rajkot, Morbi, Gandhi Dham, Baroda, Vapi Reporting to (Name & Designation): Industry: Automation Minimum education qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field required: Total relevant experience Minimum 2 years Sales Manager No of reportees: Sales Team Roles & responsibilities: 1) Generate new leads utilising various resources Visit prospective and existing Customers to understand their automation and control requirements Select suitable automation, electrical, and other related products to suit control requirements Prepare techno-commercial offer together with BOM and System Architecture from selected products Negotiate offer with Customers and get order Co-ordinate with Project Engineering Team and Purchase Team to ensure smooth and timely execution of order Perform commercial formalities and ensure timely payment from Customers Set sales targets jointly with department head and strive to achieve them Do sales promotion activities with clients, like, OEMs, End Users, EPCs, Consultants, etc. Perform organisational working procedure on ERP System Minimum education Qualification: Diploma's degree in IC / Electronics / Electrical / Mechatronics Preferrable educational Qualification: Bachelor's degree in IC / Electronics / Electrical / Mechatronics Total experience required: 2 to 3 years of sales experience in the industrial automation solutions field Total relevant experience Required: Minimum 2 years Skills Required: Essential criterions for Selection: PLC Programming and Troubleshooting (Programmable Logic Controllers) HMI Configuration and Operation (Human Machine Interfaces) SCADA Systems Expertise (Supervisory Control and Data Acquisition) AC VFD Operation and Maintenance (Variable Frequency Job Description Drives) AC Servo System Handling (Servo Motors and Drives) Sensor Integration and Calibration Transmitter Configuration and Maintenance Control Device Programming and Application Automation Systems Troubleshooting Industrial Control Systems Knowledge Desirable but not essential Criteria For Selection: Preferred age group: 25-35 Years Target Industries/companies: Annual CTC: 4 to 5 lacs (No bar for right candidates)

As the Maintenance & Engineering Team Leader, you will be responsible for overseeing all plant maintenance and preventive maintenance activities at the site. Your primary focus will be on ensuring that all engineering documentation and SOPs are up-to-date and accurate. You will also be in charge of equipment qualification, utility operations, electrical and civil projects documentation, and related work activities. It is crucial that you enforce strict adherence to processes and procedures, ensuring that no shortcuts are taken during process changes, modifications, or project work at the site. You will be expected to maintain a zero-tolerance policy towards any illegal activities on-site and ensure that all personnel follow site HSE rules diligently. Additionally, you will play a key role in audit compliance, reporting, and providing advice to Quality Assurance for audit-related matters. Your role will require proven expertise in preventive maintenance, predictive maintenance, and autonomous maintenance. A background in Total Productivity Maintenance (TPM) will be highly preferred for this position. Key Criteria for this role include: - Experience in an engineering department with knowledge of GMP, safety, and all engineering sections such as electrical, utility, maintenance, and preventive maintenance. - Previous experience as the Engineering head (not section head) in a USFDA approved API manufacturing industry. - Background in a reputed API manufacturing company with a track record of facing at least one USFDA audit. - Currently working in a senior managerial position (Senior Manager/DGM/GM, not a manager). - Certification as an energy auditor. - Experience in leading a team of engineering staff comprising a minimum of 40 persons. - BE - Mechanical Graduate qualification. If you meet these criteria and are ready to take on a challenging leadership role in the maintenance and engineering field, we encourage you to apply for this position.,

As an MEP Manager for an interiors architecture company based in Farukhnagar, Gurgaon, you will be responsible for supervising the design, coordination, and implementation of Mechanical, Electrical, and Plumbing systems for both commercial and residential projects. The ideal candidate should possess 7-10 years of experience in this field, demonstrating a strong proficiency in project planning, team leadership, and cost management. Your key responsibilities will include ensuring the seamless integration of MEP systems within architectural designs, overseeing the coordination between various project stakeholders, and maintaining adherence to industry standards and regulations. Additionally, you will be expected to collaborate closely with internal teams and external partners to deliver projects within specified timelines and budget constraints. The successful candidate should have a thorough understanding of MEP principles and practices, along with the ability to effectively communicate with cross-functional teams. Your expertise in managing mechanical, electronic, and electrical aspects of projects will be crucial in driving the success of our architectural and interior design initiatives. If you are a dynamic professional with a Bachelor's Degree in a relevant field and possess the key skills of MEP management, mechanical engineering, electronic systems, and electrical installations, we invite you to apply for this challenging and rewarding position. Join our team and contribute to the creation of innovative and sustainable spaces that inspire and delight our clients.,

to understand drawing and work on site

URGENT HIRING : Service Engineer ( READ JOB DESCRIPTION ) Qualification: Diploma in Electronics or a relevant engineering field Experience: Freshers with basic technical knowledge or experienced candidates welcome Requirements: Must have a valid two-wheeler driving license Salary: ₹15,000 – ₹25,000 per month Benefits: Petrol/Travel allowance Company-provided vehicle for field visits Provident Fund (PF) Employee State Insurance (ESIC) Job Description:We are seeking a motivated and technically skilled Service Engineer to join our team. The role involves installation, maintenance, and troubleshooting of equipment, along with providing technical support to customers both on-site and remotely. Key Responsibilities:Install, maintain, and service electronic or mechanical equipment Diagnose and troubleshoot electrical, electronic, or software-related issues Visit customer locations for support and maintenance tasks Maintain accurate service reports and documentation Provide basic training and guidance to customers Ensure timely service and customer satisfaction Coordinate with internal teams for parts, upgrades, and feedback Follow company policies, safety, and compliance standards Perks & Benefits: Competitive salary with travel and petrol allowance Company vehicle provided for field service PF & ESIC benefits Opportunity for learning and career growth Supportive work environment with hands-on training

Company Description SMART OHM LLP is a start-up based in Bangalore, India, focused on providing IoT-based multi-tenant and multi-brand, smart home automation solutions. With introduction of e-commerce solution - Domotiso.com, we aim to be a one-stop solution for proud home owners and businesses seeking innovative solutions. Role Description This is a full-time on-site role for a Electrical Engineer at SMART OHM in Bengaluru. The Engineer will be responsible for day-to-day tasks associated with Installation and service of Home Automation, Home Theatre and Security Systems. The job requires quick learning and problem solving skills with good customer communication, providing issue resolution. Qualifications Excellent communication and customer service skills (Electrical) ITI or Engineering Graduate is preferred Ability to create effective training materials Strong organizational and time management skills Problem-solving and decision-making abilities Ability to work independently and within a team Familiarity with IoT and smart home automation systems is a plus Diploma or Bachelor's degree in Electrical or related field is preferred

Job Title: Associate Sales Engineer Location: Bengaluru Experience Required: 1–4 Years of Relevant Experience Job Type: Full-time Salary: ₹3 LPA – ₹4.5 LPA (Fixed) Incentives: Target-based, starting from ₹5,000 per month — no upper limit Two - Wheeler & Valid DL : Mandatory About the Role: We are seeking a dynamic and goal-oriented Associate Sales Engineer with a strong background in customer sales and excellent communication skills. The ideal candidate should be confident in client interactions, capable of building long-term relationships, and driven to meet and exceed sales targets. This is a field-based role, involving client meetings, product presentations, and proactive follow-ups to close deals. Role & Responsibilities: ● Identify potential customers and understand their needs through consultations and solution- oriented presentations. ● Deliver compelling product demonstrations and walkthroughs tailored to each client. ● Build strong rapport and maintain long-term relationships with customers. ● Take full ownership of the sales funnel — from lead validation to deal closure. ● Consistently achieve and exceed monthly sales targets through strategic planning and execution. ● Conduct timely follow-ups and resolve client queries to aid conversions. ● Maintain detailed and accurate documentation of all interactions using CRM tools. ● Collaborate with internal teams to ensure successful onboarding and customer satisfaction post- sale. Preferred Candidate Profile: ● Fluency in English and Kannada is mandatory. ● Flexibility in travelling was mandatory. ● Proven experience in customer sales and outbound sales (B2C or B2B). ● Strong passion for sales and earning through performance-based incentives. ● Excellent communication, interpersonal and presentation skills. ● Quick ability to build customer rapport and trust. ● Prior experience in consultative sales, field sales, or solution selling is a strong plus. ● Self-driven, target-focused, and eager to grow within the organization. ● Previously worked on electrical equipment sales will be an advantageous but not mandatory. Perks and Benefits: ● Incentive Structure: Target-based, starting from ₹5,000/month with unlimited earning potential. ● Performance Rewards: Monthly bonuses, spot rewards, and employee recognition programs. ● Training & Development: Structured sales training, presentation coaching, and one-on-one mentorship. ● Career Growth: Accelerated growth opportunities for high performers. ● Work Culture: Energetic, supportive, and highly collaborative team environment.

Job Summary: We are seeking an experienced and dedicated Senior Project Engineer to oversee the planning, coordination, and execution of MEP (Mechanical, Electrical, and Plumbing) systems across our commercial and residential projects. The ideal candidate should possess technical expertise, leadership skills, and a strong ability to deliver projects on time, within budget, and to quality standards. ⸻ Key Responsibilities: • Supervise and manage site execution of MEP works (HVAC, Electrical, Plumbing, Firefighting, etc.) • Review drawings, specifications, and BOQs; Prepare BOQ, Quotations, completion reports and Bill Submissions • Coordinate with execution team to ensure timely project delivery • Conduct regular site inspections and ensure work is as per approved drawings and standards • Monitor project progress, prepare daily/weekly reports, and track milestones • Ensure adherence to safety protocols, statutory requirements, and quality standards • Verify contractor bills, material approvals, and procurement requirements • Lead and mentor junior engineers and site staff • Attend project meetings and update stakeholders on status and challenges • Suggest cost-effective technical solutions and manage variations/change orders ⸻ Qualifications & Skills: • Bachelor’s Degree in Mechanical/Electrical/Civil Engineering • 3+ years of relevant experience in MEP project execution • Strong knowledge of AutoCAD Drawings, and Project documentation. • Excellent problem-solving, communication, and leadership skills

Job Title: Store Keeper / Store Manager – Housing Project (Real Estate) 🏢 Company: Unnati Fortune Holdings Ltd. 📍 Location: Noida sector -119 💼 Experience: 8 to 10 years (Mandatory – Builder line / Real Estate Housing Project experience) 💰 Salary: ₹30,000 – ₹40,000 per month 📍 Interview Location: AAA House 64, near Modi Mill, Okhla Phase III, Okhla Industrial Area, New Delhi 🛠 Job Responsibilities: Manage and maintain the store inventory for a large-scale housing project. Receive, inspect, and record all incoming materials at the site. Issue materials to site engineers/workers as per approved indent. Maintain GRNs, issue slips, stock registers, return notes, and all store documentation. Track daily consumption and update stock balance in system/manual registers. Coordinate with project managers, procurement team, and vendors. Keep the store area clean, safe, and organized. Conduct regular physical stock audits and report discrepancies. Ensure zero material loss, theft, or damage by maintaining strong controls. ✅ Requirements:  8–10 years of experience as a Store Keeper in construction/housing projects. Strong knowledge of building materials (cement, steel, plumbing, electrical, etc.). Experience in inventory management, documentation, and stock control. Familiarity with ERP systems or manual record-keeping. Physically fit and able to manage store movement/handling as needed. Basic proficiency in MS Excel and reporting tools.

We are looking for a skilled and detail-oriented Electrical Design Engineer to join our growing team. The ideal candidate will be responsible for creating accurate electrical drawings using AutoCAD, coordinating with the procurement team for material arrangements, overseeing panel testing, and visiting sites across India when required. Key Responsibilities Prepare detailed electrical design drawings using AutoCAD as per project specifications. Work closely with the procurement/purchase team to ensure timely material arrangements based on design requirements. Assist in the testing and inspection of electrical panels to ensure quality and compliance with standards. Provide technical support during project execution and site installations. Visit project sites across India when required for installation support, testing, or troubleshooting. Ensure all designs comply with relevant codes, standards, and safety guidelines. Maintain proper documentation of drawings, revisions, and reports.

Responsible for calibrating and maintaining measuring instruments (electrical, mechanical, thermal, etc.) to ensure accuracy and compliance with standards like ISO/IEC 17025. Prepares calibration certificates, maintains records, and performs on-site calibration when required. Key Responsibilities:Calibrate instruments as per national/international standards. Prepare and maintain calibration certificates and reports. Ensure traceability and measurement accuracy. Handle customer queries and perform on-site calibrations. Maintain and troubleshoot standard equipment. Qualification: Diploma/B.Tech/B.Sc. in Electronics, Mechanical, Instrumentation, or Physics. Skills: Knowledge of calibration techniques, standards (like NABL, ISO), documentation, and basic troubleshooting.

Job Title: Property Manager Job Summary: The Property Manager is responsible for overseeing the day-to-day management, rental operations, and maintenance of properties. This includes tenant management, rent collection, property upkeep, and coordination of repairs and civil works. The manager also handles tenant acquisition through local property dealers when a property becomes vacant, ensuring optimal occupancy and revenue. Key Responsibilities: Property Maintenance & Upkeep Monitor and address wear and tear of the property. Coordinate regular maintenance, repairs, and civil work as required. Ensure all services (plumbing, electrical, civil, etc.) are functional and well-maintained. Rent Collection & Financial Management Collect rent from tenants on time and issue receipts. Maintain detailed records of rent collection and pending payments. Prepare monthly reports of income and expenses related to the property. Tenant Management & Acquisition Serve as the point of contact for tenants regarding property issues. Ensure tenant compliance with property rules and lease agreements. Handle complaints and resolve disputes professionally. When a property is vacant, coordinate with local property dealers to find new tenants and ensure timely occupancy. Administrative & Record Keeping Maintain accurate documentation of rental agreements and tenant details. Keep records of property maintenance schedules, vendor details, and expenses. Coordinate with contractors, vendors, and service providers for required work. Property Enhancement & Safety Conduct regular property inspections. Ensure compliance with safety, hygiene, and building regulations. Recommend improvements to enhance property value and tenant satisfaction. Skills & Qualifications: Strong organizational and communication skills. Knowledge of local property market and rental procedures. Basic understanding of civil, plumbing, and electrical work. Financial management and record-keeping skills. Ability to manage tenant relationships and coordinate with property dealers. Must own a bike for local travel and property visits.

Should be familiar with: HVAC operation & maintenance DG, chillers, compressors, AHU, VFD systems Electrical control panels, wiring, safety procedures Pumps, motors, conveyors, valves Knowledge of GMP/Cleanroom norms is preferred Key Responsibilities: Operate and monitor HVAC systems, chillers, AHUs, compressors, and ventilation units Perform maintenance of electrical systems, panels, wiring, and motors Support mechanical operations including pumps, pipelines, conveyors, and utility equipment Follow SOPs and GMP guidelines within pharma production and utility areas Log routine readings, assist in breakdown maintenance, and ensure equipment uptime Report issues and coordinate with engineering teams for preventive and corrective actions 🎓 Qualifications & Skills:ITI Pass – Electrician / Fitter / HVAC / R&AC / Mechanical Minimum 1–5 years of experience in pharma, biotech, or industrial plants Ability to work in rotational shifts (day/night) Basic understanding of safety protocols, cleanroom procedures, and engineering documentation Maintain records, preventive maintenance schedules, follow SOPs etc.

Job DescriptionHiring Apprenticeship Trainees – German MNC | Taloja/ Murbad, Maharashtra Position: Apprenticeship Trainee – Plant Maintenance Location:Taloja/ Murbad, Maharashtra Stipend: ₹21,500/month + ₹750 mobile allowance Industry: German MNC – Manufacturing/Plant Operations Job Responsibilities:Maintain and monitor plant machine operations Assist in shift incharge & shift management duties Maintain daily MIS reports Be open to working in a plant-based environment RequirementsBE/B.Tech (Chemical/Electrical only for Taloja location) BE/B.Tech (Chemical/Mechanical/ Instrumentation only for Murbad location) Passing years: 2021, 2022, 2023, 2024 & 2025 (Provisional certificate required) Freshers welcome! 6 days working , 1 rotation week off Day shift job Ready to work in Plant BenefitsDirect payroll job ₹750/month mobile allowance Hands-on experience in a top German MNC