118 Ecu Jobs - Page 5

Key Responsibilities : EE Industrialisation Pilot - Analyse the EE failures on Harness, ECU, Software etc and pilot their resolution. Manage and maintain the ECU HW, SW, Calibration and Configuration for new projects. Manage weekly meeting to report all the EE issues and check countermeasure progress status with EE Stakeholders(Architect, Designers, Project management, VQA, Facility etc) Maintain the vehicle simulation bench - Plan and procure the components, software required for new models. Study the capability of VEP/EOL facility and coordinate the changes for new models. Train line operators of the plant to perform 1st level EE failure analysis. Skills Required: Strong knowledge about ve...

Role & responsibilities Experience in Model Based Development with MATLAB for Application software of ECUs on Tractor & Drive Strategy, Brake & Steering and Power Shuttle Tractor (Fault Diagnostics). Experience in Defining, Documenting, linking and Maintaining the Software Requirement Specification Document. Experience in Model-in-the-Loop (MiL) with Plant Model, Bench level and System Level verification . Experience in Model Based System Engineering (MBSE) and worked in various stages of V-Model. Experience in using PTC Integrity for version management and Integration in complex engineering projects. Working Knowledge on CAN based Vector tool such as CANape, CANalyzer and Debugging Tools su...

Educational Requirements- Bachelors or master’s degree in electrical, Electronics, Mechatronics Experience-5-6 yrs Location-Chennai Job Summary – Embedded Developer/coder We are seeking a highly skilled and motivated Embedded Software Developer/coder with proven expertise in the design and development of automotive electronic control units (ECUs). --- Key Responsibilities Understand SW requirements and ability to relate it to system requirement/feature. Interpret and implement software design requirements provided for ECU SW development. Design, develop, and debug embedded software using C/C++ on RTOS and non-RTOS platforms. Develop low-level device drivers for a range of microcontrollers. I...

Must have experience in component development of either ECUs, Actuators, Motor Control modules, sensors, etc. Role & responsibilities 1. Lead development of ECUs, Actuators, Motor control modules and Sensors development. Also, have basic knowledge of electric vehicle and associated systems like DC-DC converter and Battery. 2. End-to-end ownership from design conceptualisation to implementation in production. 3. Manage a cross-functional team to ensure seamless integration and validation of systems at both component and vehicle level 4.Interpret circuit schematics of ECUs, actuators, sensors and ensure robust design of electrical systems. 5.Initiate, Interact with CFT & Lead the design engine...

Role & responsibilities Extensive experience in automotive electronics/electrical Hardware in Loop (HIL) validation. Hands-on Python experience for HIL library/GUI development in automated validation. Experienced in HIL testing environments (ETAS/dSPACE/ECU TEST (Preferable)) Good understanding of functionality of S/W development and validation, system/interface specification and Test case methodologies. Perform Root cause analysis (RCA) & develop and execute test plans to validate the performance of DUT. Strong verbal and written communication and should have good experience in Customer interactions on regular basis.

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients throughout the product lifecyc...

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients throughout the product lifecyc...

Vehicle Document Analyst - Preferable - Immediate joiners with High level communications. GGS Information Services is a global brand offering technical publication and technology consultation services. We are committed to influencing our clients business outcomes with a strong focus on enhancing customer experience. Our solutions are designed to drive performance, efficiency, and long-term value. At GGS, innovation, collaboration, and excellence are at the core of everything we do. website: www.ggsinc.com Requirements: Education: Bachelors degree in Automobile, Mechanical, or similar field. Experience: 3 to 4 years in a relevant role (Automobile or Mechanical) Job Responsibilities: Detect an...

RELEVANT EXPERIENCE Having 5 -7+ years of experience in Automotive ECU development Hands on experience in HW Circuit design and development (Automotive ECU) Schematic, Design justification, circuit simulation, worst case analysis, Derating, thermal analysis and component selection. Design Failure mode effect analysis (DFMEA), FTA Strong Technical Knowledge in small signal electronics (analog and digital) (Opamp, MOSFET, BJT) knowledge on automotive electronics technology, test standards and processes Hands-on with Automotive ECU components selection and validation, Power supply topologies - Linear, LDOs, DC-DC switching power supplies (Buck, Boost, Buck-Boost) Micro controllers and Digital c...

Role & responsibilities PLC and LabVIEW programs to prevent software corruption, Planning & execution of preventive and predictive maintenance schedules Maintenance of Selective Soldering Machines Operation and troubleshooting of ICT Machines Maintenance of production machines in EV, Lighting, and ECU sections

Part of execution-focused hardware team responsible for successful development and productization of in-house designed Vehicle Electronic Control Units. The selected candidate for this role must work with all internal stakeholders as well as external suppliers and partners to drive the product through its design, development, and test cycles as well as vehicle integration. The successful candidate must demonstrate a keen interest as well as broad technical skills and understanding of embedded electronic hardware control units in automotive domain. The main job responsibilities will include but not limited to: Conceptualize the HW architecture deduce High Level Block Diagram & define I/O conf...

Position - Electronic component development - Powertrain/Body Electronics ECUs (Aftersales) Key Responsibilities: End-to-end development and lifecycle support of ECUs used in vehicles. Analyze and resolve electronic component and ECU-related issues in both development and production phases. Knowledge on selecting valid second source components during semiconductor shortage Basic HW knowledge on the Active, Passive components and ASICs. Define, update, and manage requirements specifications including safety and diagnostic requirements. Coordinate with internal teams (R&D, Aftersales, Quality, Logistics, Purchase) and external suppliers for component development and testing. Knowledge on B-sam...

Locations: Bangalore, Mumbai, Pune, Hyderabad, Chennai, Delhi Domain: Autonomous Driving software development for vehicles Mandatory skills: Virtual plant modelling, ECU simulation Creation of traffic models, ADAS sensor models, real-time systems Component HIL Hardware I/O design and Setup (DSpace) Matlab/Simu link tool set, Python

Job Title : Cockpit Software | Regional Test Scrum Lead Responsible to deliver state of the art Cluster/Display/eV Component software. The Mission of this Role: Leads testing efforts for multiple software projects with varying degrees of complexity / priorities. Undertakes testing activities in Test Automation, Behavior driven development (BDD), Scrum and Agile practices. Establishes tactical plans, collaborates across functions to improve efficiency and predictability in software testing. Provides technical road map and day-to-day technical leadership to the testing scrum teams. Responsible for capability building of scrum team members with their knowledge and expertise. Responsible to driv...

Key Skills Technically strong in Automotive ECU Testing. Understanding the ECU software documentation, Requirement analysis and Test specification development Automotive communication protocols Ethernet, CAN, LIN , FlexRay Testing HIL testing & HiL test automation development, good programming skills, scripting skills, experience in automotive ECU software domain Experience in dSPACE HIL hardware ( Scalexio ) and tools Body electronic/Powertrain/HVAC core system domain knowledge Additional ECU Function testing experience, HVAC System testing experience, good knowledge on Steppers, Sensor & actuator. Experience & hands on with Component and Cluster HIL validations. Basic Knowledge on Engine a...

PT HIL Systems & HW Engineer- Developer Stellantis Propulsion organization is seeking a PT HIL Systems and HW Engineer on the Virtual Engineering team to work on Hardware-In-the-Loop systems. The candidate must have demonstrated knowledge and experience in development of HIL systems (dSPACE, ETAS, NI etc.) with thorough knowledge of HIL simulator hardware, ECU electrical interface definition and harness development. He/ She will be the primary interface between xIL development team and external teams for xIL requirement analysis and impact analysis. In this position, the candidate shall interface with cross-functional team of ECU Hardware, Systems, SW, Controls, Plant Modeling and Calibratio...

Key Skills Technically strong in Automotive ECU Testing. Understanding the ECU software documentation, Requirement analysis and Test specification development Automotive communication protocols Ethernet, CAN, LIN , FlexRay Testing HIL testing & HiL test automation development, good programming skills, scripting skills, experience in automotive ECU software domain Experience in dSPACE HIL hardware ( Scalexio ) and tools Body electronic/Powertrain/HVAC core system domain knowledge Additional ECU Function testing experience, HVAC System testing experience, good knowledge on Steppers, Sensor & actuator. Experience & hands on with Component and Cluster HIL validations. Basic Knowledge on Engine a...

PT HIL Systems & HW Engineer- Developer Stellantis Propulsion organization is seeking a PT HIL Systems and HW Engineer on the Virtual Engineering team to work on Hardware-In-the-Loop systems. The candidate must have demonstrated knowledge and experience in development of HIL systems (dSPACE, ETAS, NI etc.) with thorough knowledge of HIL simulator hardware, ECU electrical interface definition and harness development. He/ She will be the primary interface between xIL development team and external teams for xIL requirement analysis and impact analysis. In this position, the candidate shall interface with cross-functional team of ECU Hardware, Systems, SW, Controls, Plant Modeling and Calibratio...