Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Job Accountabilities # Provide support in preparing Well Plans and supervise execution of daily Rig, HF and completion operations as per RIL HSE policies and other guidelines. # To ensure compliance of all safety requirement as per DGMS & QA/QC for the wells & completion equipment and ensure operations are carried out in environmentally responsible way. # Coordinate with G&G, LAQ and civil for availability of well sites. Also Participate in joint site surveys to ensure that site and AR are constructed to ensure easy passage of Rigs and HF equipment to sites. # Maintaining the drilling and completion database updated. # To assist in preparing AFE and Budget for D&C and keep close monitoring of actual well cost vs AFE/Budget. Also, reviewing and processing, wherever required Contractors monthly Invoices in line with provisions of respective Contracts/PO/Work orders. # Bring out all critical issues relating to operations and manpower # Evaluate and monitor the contractor's performance to ensure the improvement of their service and ensure compliance with safety, contractual, procedural and regulatory requirements # Assist in developing various Scope of Work and technical specifications for Drilling & Well Completion equipment for tender packages to be in line with the engineering standards and meeting the operational requirement. # Plan with the focus that down hole complications are minimised and assist in liquidating various down hole complications as and when required. Skill & Competencies # Technical knowledge of planning and execution of drilling, hydraulic fracturing, completion, CTU and pump setting operations # Techno commercial understanding. Education Required Bachelor degree or higher qualification in Petroleum / Mechanical Engineering Experience Required Minimum 10 years# experience of Drilling and Completion in CBM / upstream (E&P) Oil/Gas industry. Experience of working in CBM field would be preferred. Show more Show less

Job Accountabilities To support/assist Subsea Intervention with the objective of Safely execution to ensure that the Job is carried out as per Procedure. Co-ordinate with Logistic/Spares /Base workshop Engineer to make available all intervention tooling for any planned & Unplanned activities. Job Accountabilities Assist in preparation and development Intervention procedure and acquire knowledge to perform the task independently Ensure correctness of VMIR issued with the Intervention procedure in-terms of torque values & interface requirement Keep history of all Intervention activities along with time taken for the job completion Adhere to Intervention SOP and ensure all Lesson Learned related to continuous improvement of SOP are closed and up-to date; Participate in Design & Safety Reviews, HAZOP, HASIDs, Risk Assessments etc.; Review to subsea trees and all ROV interfaces and systems available to carry out well intervention works and ensure fit for purpose interfaces Maintains a log of operations events, lessons learned reports, and deviation request Support ROV operated Valve movement & Trouble shooting in the field Adherence to PTW/MOC system for carrying out Interventions Review of Standard Operating procedures / Work Instructions for Intervention, Standard Operating procedures Review SITs Procedure for ROV accessibility Participate in FEED & Detail Engineering activities for upcoming Brown Field Projects from O&M group. Participate in FEED/Engineering Study for all In-House project w.r.t new subsea equipment installation related to Subsea System modification/ repair/ operation/ inspection Participate in HAZID/HAZOP/RA for all Intervention & Hardware Activities and implementation of mitigating measures /emergency actions assigned Support HSE with all required inputs from Intervention group such as RA / HAZID / HAZOP / Safety Observations / Meetings etc Support intervention activities for handing over and taking over the subsea assets to & from Drilling & Completion / Projects in safe manner Interface with all disciplines to obtain relevant data that may require Intervention inputs Skill & Competencies Key technical / functional competencies and skills required # Familiar with Subsea Intervention and Installation. Familiar with International codes & standards, Lifting Analysis, Sea fastening, installation, Operations, Subsea Production System Familiar with FAT, SIT, and SAT. Familiar with Subsea Production System Installation & Design. Knowledge of HAZOP / HAZID / RA and Risk Mgmt. Should have good Communication, Teaming & Analytical skills and understanding of Planning & Organization; Interpersonal relations; Technical Report writing Education Required Bachelor/Master#s Degree in engineering Experience Required 3 to 5 years# experience in Oil & Gas out of which 2 years in Subsea/Deepwater Maintenance activities Show more Show less

Willing to learn handling or operating sawing, drilling, riveting, grinding, nailing machines. Assisting operators. Maintenance of machines. Knowledge of measuring instruments. Adhering to safety protocols and regulations. Willing to learn reading and interpreting technical drawings, standard operating procedures, quality manuals and other necessary process documents. Handling fitting and special tools. Willing to learn knowledge of industry standards 5S, Poka-yoke etc.,

fitter will know drilling/typing/caliper check/micro-meter/grinder/fitting.

We are an engineer-based company, Elentrix Mex Tech. Job Title: Electrical Engineer Experience: 3 – 4 year What we expect from you: Design and review electrical layouts for underground cabling in trenchless operations (HDD, microtunneling, etc.). Evaluate site conditions and coordinate with civil and drilling teams to ensure proper utility placement. Supervise installation of electrical cables, conduits, and related equipment. Conduct load analysis and voltage drop calculations for underground electrical systems. Ensure compliance with national and local electrical safety codes and standards. Troubleshoot and resolve on-site electrical issues during execution. Liaise with utility providers, clients, and government bodies as required. Prepare reports, drawings, and documentation for internal and client use. Ensure all work is done with adherence to safety and quality protocols. Qualities we are searching for: - Knowledge of underground cable laying by HDD / trenchless technology - Knowledge of 33/11 kV sub-station - Knowledge of CSS & RMU - Estimation of the Site Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Internet reimbursement Work Location: In person

Assemble and fit components according to engineering drawings. Operate and maintain fitting tools and machines (grinders, drill machines, etc.). Conduct routine maintenance of mechanical equipment. Align and test mechanical systems for performanc. Perks and benefits Attendence bonus and monthly bonus

The primary objective of the CDD Analyst is to provide a high-quality administration service to client by achieving SLA s along with quality. Key Accountabilities and main responsibilities Strategic Focus Conducting CDD and EDD on new and existing counterparties, accurately, timely and in line with company policies and procedures; using a risk-based approach Conducting PEP and sanction checks on new and existing counterparties, as part of the due diligence process Investigating counterparties for any adverse information Ensuring CDD information held appropriately on existing counterparties, is refreshed, using a risk-based process so that it remains up to date and accurate in accordance with company policy and money laundering regulations. Core knowledge of Money Laundering and Counter Terrorist Financing Regulations (AML/CTF) Receive CDD requests from the CDD Team Lead and reviewing the requirements. Perform CDD on new and existing counterparties and enhanced due diligence where applicable Knowledge on Ownership drill down, threshold for CDD and EDD. Knowledge on Open searches screening, discounting, and providing rational Undertake sanction and PEP screening on new and existing counterparties to determine if there are any PEPs/Sanction/AML risks Re-categorising risk ratings for existing counterparties where necessary. Obtain background information on clients through on-line research and other relevant sources Review CDD information held on existing clients to identify shortfalls and obtain missing documentation Record account status and approval information in the appropriate databases/spreadsheets Update the PEP register and complete PEP forms ensuring all PEP relationships are approved by the relevant persons Operational Management Conducting investigations on counterparties for any adverse information, reputational risk issues, inappropriate practices, or behaviour on the part of the counterparty. Conducting risk assessments and applying risk categories to new counterparties Governance Risk Maintain level of accuracy Complete assigned task as per provided SLA Experience Personal Attributes Experience of CDD requirements for a wide range of customers including private companies, government entities, regulated and unregulated funds, offshore jurisdictions and introducing brokers Good Knowledge on Client onboarding and Remediation Good organisational skills and the ability to work well under pressure. Good knowledge of external regulations, whilst keeping abreast with internal policies and procedure Knowledge on Ownership drill down, threshold for CDD and EDD. Knowledge on Open searches screening, discounting, and providing rational Good Communication/ Written Skill Good Knowledge on Pep Checks and discounting Good verbal and written communication skills Work closely with colleagues in Compliance and Front Office Work closely with CDD Managers Exhibits high level client service skills Excellent problem-solving skills both independently and supporting others Excellent time management skills, demonstrating flexibility and the ability to manage and plan in order to meet deadlines Ability to manage change The Role need to support APAC or EMEA shift and would need to work in Rotational shift wherein shifts would start at 3:30 am IST for APAC and from 11.30 AM for EMEA. The primary objective of the CDD Analyst is to provide a high-quality administration service to client by achieving SLA s along with quality. Key Accountabilities and main responsibilities Strategic Focus Conducting CDD and EDD on new and existing counterparties, accurately, timely and in line with company policies and procedures; using a risk-based approach Conducting PEP and sanction checks on new and existing counterparties, as part of the due diligence process Investigating counterparties for any adverse information Ensuring CDD information held appropriately on existing counterparties, is refreshed, using a risk-based process so that it remains up to date and accurate in accordance with company policy and money laundering regulations. Core knowledge of Money Laundering and Counter Terrorist Financing Regulations (AML/CTF) Receive CDD requests from the CDD Team Lead and reviewing the requirements. Perform CDD on new and existing counterparties and enhanced due diligence where applicable Knowledge on Ownership drill down, threshold for CDD and EDD. Knowledge on Open searches screening, discounting, and providing rational Undertake sanction and PEP screening on new and existing counterparties to determine if there are any PEPs/Sanction/AML risks Re-categorising risk ratings for existing counterparties where necessary. Obtain background information on clients through on-line research and other relevant sources Review CDD information held on existing clients to identify shortfalls and obtain missing documentation Record account status and approval information in the appropriate databases/spreadsheets Update the PEP register and complete PEP forms ensuring all PEP relationships are approved by the relevant persons Operational Management Conducting investigations on counterparties for any adverse information, reputational risk issues, inappropriate practices, or behaviour on the part of the counterparty. Conducting risk assessments and applying risk categories to new counterparties Governance Risk Maintain level of accuracy Complete assigned task as per provided SLA Experience Personal Attributes Experience of CDD requirements for a wide range of customers including private companies, government entities, regulated and unregulated funds, offshore jurisdictions and introducing brokers Good Knowledge on Client onboarding and Remediation Good organisational skills and the ability to work well under pressure. Good knowledge of external regulations, whilst keeping abreast with internal policies and procedure Knowledge on Ownership drill down, threshold for CDD and EDD. Knowledge on Open searches screening, discounting, and providing rational Good Communication/ Written Skill Good Knowledge on Pep Checks and discounting Good verbal and written communication skills Work closely with colleagues in Compliance and Front Office Work closely with CDD Managers Exhibits high level client service skills Excellent problem-solving skills both independently and supporting others Excellent time management skills, demonstrating flexibility and the ability to manage and plan in order to meet deadlines Ability to manage change The Role need to support APAC or EMEA shift and would need to work in Rotational shift wherein shifts would start at 3:30 am IST for APAC and from 11.30 AM for EMEA.

Job Title: Inspector Welding Engineer (IWE) Experience: 1 to 5 Years Location: Coimbatore Employment Type: 1-Year Extendable Contract Key Responsibilities: 1. Inspection and Quality Control: Conduct thorough inspections during and after welding activities to ensure compliance with quality standards. Identify and report any deviations or defects in welding operations. 2. Layout and Assembly Check: Ensure proper alignment, fit-up, and preparation of components prior to welding. Conduct dimensional and visual checks to verify assembly accuracy. 3. Match Drilling Verification: Inspect and verify the accuracy and alignment of drilled holes before welding. Ensure compatibility and precision of components as per the design. 4. Adherence to Codes and Standards: Ensure all welding processes, consumables, and techniques comply with applicable industry codes and standards (e.g., ASME, AWS, ISO). Maintain up-to-date knowledge of welding regulations and safety requirements. 5. Review of Methodologies and Inspection Plans: Review and provide inputs on Welding Procedure Specifications (WPS), Inspection and Test Plans (ITP), Method Statements, and Process Flows. Approve test plans and procedures to ensure quality assurance throughout the welding process. Preferred Candidate Profile: Degree/Diploma in Mechanical Engineering or related field. Certified Inspector Welding Engineer (preferred). Strong understanding of welding techniques, codes, and quality control procedures. Excellent attention to detail and problem-solving skills. Good communication and documentation skills. Show more Show less

L&T GeoStructure is a specialized entity with unique expertise in EPC projects involving the construction of Jetties, Berths, Intake wells of large diameter, Plastic Concrete cut-off walls, Deep Diaphragm walls, and Ground Improvement works. We also excel in executing challenging underground structures comprising of Deep Basements, Retaining structures (Embedded & Elevated), Metro works, and Riverine works across various sectors. We have an extensive fleet of high-end hydraulic piling rigs, Reverse Circulation Drilling rigs, Trench Cutters, Grab, various capacity of cranes, vibro-hammers, and other ground engineering equipment to execute challenging projects, both in terms of complexity and time. Additionally, we also own a Jack-up Barge to support marine projects. We engage in consultative selling by providing alternative designs and cost-effective solutions with the help of a robust in-house design team. Business related to soil is always challenging, primarily due to large variations in properties across the depth and breadth of any site. The engineering and technology team acts as a knowledge provider to mitigate the risk and as a catalyst to hasten project execution and enter innovative areas to establish L&T GeoStructure as a pioneer in the domain. L&T GeoStructure REQUIREs ENGINEERING PROFESSIONALS WITH EXPERIENCE IN MARINE STRUCTURES, PILING, D'WALL ETC. FOR OUR PAN INDIA PROJECT SITES. PLANNING ENGINEERS PILING ENGINEERS / FOREMAN MARINE ENGINEERS MARINE PROJECT MANAGER QUALITY MANAGER / ENGINEER EHS MANAGER / ENGINEER BUND MANAGER ELECTRICAL LEAD MECHANICAL LEAD CIVIL PRE CAST AND CAST IN SITU MARINE FOREMAN SURVEYOR REFER DETAILED JD FOR INFORMATION Show more Show less

Hardware Development Lead - Senior PCB Layout Engineer Hyderabad, India Engineering 64601 Job Description WHAT YOU DO AT AMD CHANGES EVERYTHING We care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world’s most important challenges. We strive for execution excellence while being direct, humble, collaborative, and inclusive of diverse perspectives. AMD together we advance_ Collaborates in developing new or modified, high-density, printed circuit boards. Work with Design Engineer and Simulation Engineer in making sure PCB layout adheres to SI/PI requirements. Work on the Layout design for highspeed interfaces like PCIe Gen5/6, Multi-Gigabit serial buses, DDR5/LPDDR5/DIMM and other circuits. Work on the characterization/evaluation and production boards. Create or modify footprints as per guideline and maintain library database. Should work with Fabrication and Assembly house for DFX queries. Should follow process, guidelines, and checklists to produce error free design. Should be able to meet the schedule. Job Description : 12 + years of layout design experience in High-Speed Digital Design, Analog, and RF boards. Excellent experience in routing of interfaces like PCIe Gen5/6, Multi-Gigabit serial buses, DDR5/LPDDR5/DIMM, Flash, SPI, I2C and High current switching power supplies Excellent hands-on knowledge of Cadence Allegro PCB design, constraint manager. Excellent knowledge of IPC standards, HDI, back drilling, stack up selection. Excellent experience in design with DFM/DFT/DFA constraints. Hands on experience on CAM350 gerber review tool. Hands on experience on footprint creation and library database maintenance. Good understanding of mechanical 3D model design practice. Ability to work independently with minimal supervision and ability to handle multiple tasks. Ability to work cross-functional along with strong interpersonal and communication skills. #LI-SR4 AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants’ needs under the respective laws throughout all stages of the recruitment and selection process.

Production manager for Waste water teatment plant. Production, Quality, cutting, bending, drilling, Machine Shop, Welding Shop, Paint Shop – blasting, primer, painting, CNC Machine usage and programming. Loc:Faridabad Exp: 15 Yrs info 9810686873 Required Candidate profile Candidate preferred from Waste water tratment plant fabrication. Or from heavy fabrication in Sheet metal with experience in cutting, bending, drilling, and CNC machine operation is mandatory.

consult geological maps and aerial photographs to advise on site selection assist with the design of built structures, using specialised computer software or calculations collate data and produce reports oversee the progress of specific contracts plan detailed field investigations by drilling and analysing samples of deposits/bedrock supervise site and ground investigations visit new project sites advise on and test a range of construction materials, for example sand, gravel, bricks and clay make recommendations on the proposed use of a site and provide information advise on problems such as subsidence manage staff, including other engineering geologists, geotechnical engineers, consultants and contractors attend professional conferences and represent the company or organisation at other events. Job Types: Full-time, Fresher Benefits: Provident Fund Schedule: Day shift Work Location: In person

Description Amazon.com strives to be Earth's most customer-centric company where people can find and discover virtually anything they want to buy online. By giving customers more of what they want - low prices, vast selection, and convenience - Amazon.com continues to grow and evolve as a world-class e-commerce platform. Amazon's evolution from Web site to e-commerce partner to development platform is driven by the spirit of innovation that is part of the company's DNA. The world's brightest technology minds come to Amazon.com to research and develop technology that improves the lives of shoppers and sellers around the world. Amazon Operations Amazon Worldwide Operations is the underlying fulfillment and customer service engine that ensures Amazon creates the same consistent, world-class customer experience every time. We are looking for high-potential, flexible, innovative, and forward-thinking professionals to join our India Operations team. Are you ready to drive high-visibility, strategic, revenue-generating projects as well as leverage Lean methodologies to lead Operational process improvement initiatives? Are you equally comfortable digging into business requirements as you are drilling into architecture and design with development teams? Join the Operations team as Operation Executive (OE). As Operation Executive, you will be responsible for monitoring multiple 3P stores from operations, performance, design and compliance point of view. You will be working with multiple internal and external stakeholders to manage operations performance and to drive program initiatives yielding improvement in quality, productivity, speed and cost. With customer obsession and a high sense of ownership, you will utilize your skills to identify patterns and any disruptions in it. You should be able to dive deep, scrutinize details and foresee data implications. You must be flexible to work weekends and/or overnight shifts regularly and to travel to stores to design, set up & monitor 3P operations. Roles And Responsibilities Monitor operations of the assigned stores and suggest & deploy improvements Identify useful data accumulated from multiple sources and take necessary actions Foresee implications based on current data and trends Be organized, apt and prompt in notifying the situation, problem solve and recur prevention Serve as a liaison between the internal and external stakeholders keeping in mind the objectives, limits, conformance and information privacy Train & direct associates for action and conformance of norms & practices Visit the stores for various operational conformance, restrictions and norms Conduct ops checklist based on SOP Key job responsibilities Communicating with team and operations stakeholders. Managing amazon driven process at 3p stores. Providing training and one point lessons to ground staff to implement Amazon Operation processes. Perform daily/ weekly site audits Travel to site locations Basic Qualifications 1+ years of customer-facing environment, warehousing, logistics or manufacturing experience Speak, write, and read fluently in English Experience with Microsoft Office products and applications Experience with Excel Preferred Qualifications Bachelor's degree Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Company - ASSPL - Telangana Job ID: A2978633 Show more Show less

BMS Supervisor Cum Technician Skills : Cable Tray, DDC Panel Installation, Device Installation, Cabelling, Drilling

- Proficient in reading and interpreting engineering blueprints / Drawing Reading. - Proficiency in operating VMC machines. G Code / M Code - Experience of G Code / M Code, Drilling cycle, Machines speed, XY Controller, dimensions. - Set up and adjust machine tools as necessary Set up and operate VMC machines according to established procedures and production schedules, including loading raw materials and tooling.

Job Description At National Oilwell Varco (NOV), we are seeking passionate Software Engineers to revolutionize the oil services industry through the latest technologies. As a member of our diverse team, you will contribute to delivering exceptional value by working on cutting-edge solutions that empower critical decision-making, drive automation, and reduce operator costs. Responsibilities Designing and developing clean, modular, and reliable code using C#/.NET (Full Stack), C++ experience is desirable. Staying updated with emerging technologies, conduct research, and apply new tools and techniques. Debugging software issues, collaborate with product managers to gather requirements, and document your work. Clarifying requirements, interpret technical specifications, investigate and address reported defects, and create unit tests. Exhibiting excellent communication skills, troubleshoot complex algorithms, and propose innovative solutions. Estimating development time accurately and maintain technical documentation. Requirements Need 7+ years of software engineering experience. Need proficiency in C#/.NET (Full Stack), C++ experience is desirable. Need expertise in requirements clarification and interpreting UI/UX specifications. Have strong problem-solving abilities and the capability to analyze, correct, and document defects. Need experience creating and implementing unit test plans, scripts, and test harnesses. Have excellent verbal and written communication skills, with a focus on technical proficiency. Need to have the ability to innovate and propose creative solutions to new challenges. Need to be skilled in estimating development time accurately. Need to have a degree in an engineering discipline. Need .NET development experience and knowledge of object-oriented concepts. Need to understand of memory management and algorithms for memory performance. About Us Every day, the oil and gas industry’s best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success—now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers’ needs and work with them to deliver the finest products and services on time and on budget. About The Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations. Show more Show less

We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry. Job Duties Under broad direction, the Project Manager is responsible for medium to large scope projects including high risk full operations management projects with 1 to 2 rigs, or projects with a larger number of rigs and low to medium level risk profiles. Risk must be managed in various areas including but not limited to inter PSL dependency, performance-based contracts, lump sum turnkeys, and third party services management. This position is responsible for all aspects of a project as per company management system and the performance delivery platform documents including: Conduct Contract Handover, Creating the Project Charter and Start up plan, Develop the Project Management Plans, Conduct Contract Review, Creating Logistcs Plan, Establish project baselines for scope and cost, inspecton and mobilization of rig and third parties, Review and approve the Well Program with the Designated Technical and Operational Authorities, conducting pre spud meetings, verify well delivery completed, review performance against risk register and risk budget, document lessons learned, update and close all project records and demobilize all project resources. Functions as the client interface responsible for efficient and profitable management of the contract by coordination of all HPM resources, PSL's and Third Party services for the safe execution of a Project. Forecasts and plans activity long term and medium term to ensure that all elements are in place for successful operations. Maintains a current understanding of all regulations and issues affecting a Project. Enforces policies and procedures regarding work safety and service quality and document incidents quickly and accurately. Accountable for the training & development of all project personnel and their competency development. Confirms all personnel involved have the required certifications and competencies. Recommends changes for improvements and reports all matters which affect HPM Policies & Procedures to PM Region Manager. Maintain a positive attitude, professionalism and discretion at all times and excellent communication skills and the ability to work successfully with a wide variety of people at different levels within the organization. Demostrates strong leadership skills and client intimacy/interface. Requires a bachelor degree in a suitable S.T.E.M. (Sceince, Technology, Engineering or Mathamatics) field, and 8+ years of related experience, and a minimum of 4 years of full time oil and gas experience preferably with exposure Drilling, Intervention, and Completions Projects, with some level of P&L and contracts management exposure. Supervisory experience is essential with demonstrated ability to manage a team. Qualifications Location 2nd Floor, Worldmark 3,, Gurgaon, Haryana, 122018, India Job Details Requisition Number: 199737 Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.

SUBSURFACE MANAGER with our Client, an International EPC, to be assigned on a Contract basis, located in New Delhi, India. DURATION 24 months on-going POSITION SCOPE Our Client is seeking an experienced Subsurface Manager to lead the reservoir development and depletion efforts for our oil and gas operations. The ideal candidate will have a deep understanding of reservoir engineering, including the strategies and technologies needed to optimize the depletion of discovered volumes and maximize production efficiency. This role requires strong leadership skills to manage multidisciplinary teams, collaborate across departments, and deliver robust development plans while ensuring safe, efficient, and cost-effective operations. This is a multi-year engagement and will be based in India. PRINCIPAL RESPONSIBILITIES Reservoir Depletion Strategy Development: Lead the development and execution of reservoir depletion strategies to maximize recovery from discovered volumes while managing production rates and maintaining reservoir integrity. Reservoir Characterization: Oversee reservoir modelling and simulation, integrating geological, geophysical, and petrophysical data to accurately characterize reservoir behavior and guide depletion decisions. Development Planning: Coordinate and supervise the creation of comprehensive development plans for discovered volumes, including well placement, drilling schedules, production forecasts, and resource allocation. Production Optimization: Monitor ongoing production performance and identify opportunities for improving production rates, reducing costs, and enhancing recovery through reservoir management techniques, including enhanced oil recovery (EOR). Team Leadership: Manage a team of reservoir engineers, geologists, and other subsurface specialists, providing mentorship, performance evaluations, and career development. Cross-Functional Collaboration: Work closely with drilling, completion, facilities, and operations teams to ensure alignment and integration of subsurface and surface activities in the development phase. Data-Driven Decision Making: Utilize reservoir simulation models, well test data, and performance monitoring to make data-driven decisions that optimize depletion strategies and development plans. Compliance & Safety: Ensure that all activities comply with health, safety, and environmental regulations, and industry best practices. Risk Management: Identify potential risks related to reservoir depletion and development, and develop mitigation strategies to ensure that project objectives are met on time and within budget. Stakeholder Communication: Provide regular updates and reports to senior management, external stakeholders, and regulatory bodies on project status, challenges, and key outcomes. EXPERIENCE / QUALIFICATIONS Education: Bachelor's or Master’s degree in Petroleum Engineering, Geoscience, or a related field. Professional certifications in reservoir engineering or related disciplines are a plus. Experience: Minimum of 15 years of experience in subsurface reservoir management, with a focus on reservoir depletion, development planning, and production optimization. Technical Expertise: Strong technical knowledge of reservoir engineering, production techniques, EOR methods, and reservoir simulation tools (e.g., Eclipse, CMG, Petrel). Leadership Skills: Proven ability to lead, mentor, and motivate a multidisciplinary team. Strong communication and interpersonal skills are essential for working with various teams and stakeholders. Problem-Solving: Excellent analytical and problem-solving skills, with a strong ability to evaluate complex reservoir challenges and devise effective solutions. Project Management: Experience in managing large-scale projects, from conception to implementation, with a focus on delivering results within budget and on schedule. Software Proficiency: Familiarity with industry-standard software tools for reservoir modeling, data analysis, and production monitoring. Health, Safety, and Environmental (HSE): Knowledge of and commitment to HSE best practices in subsurface operations. Show more Show less

We are seeking an experienced React js Trainer to join our dynamic team As a React js Trainer, you will be responsible for delivering high-quality training sessions and workshops focused on React js fundamentals and advanced concepts You will play a key role in shaping the skills and capabilities of aspiring developers and seasoned professionals looking to enhance their expertise in React js

We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry. Job Duties Under broad direction, the Project Manager is responsible for medium to large scope projects including high risk full operations management projects with 1 to 2 rigs, or projects with a larger number of rigs and low to medium level risk profiles. Risk must be managed in various areas including but not limited to inter PSL dependency, performance-based contracts, lump sum turnkeys, and third party services management. This position is responsible for all aspects of a project as per company management system and the performance delivery platform documents including: Conduct Contract Handover, Creating the Project Charter and Start up plan, Develop the Project Management Plans, Conduct Contract Review, Creating Logistcs Plan, Establish project baselines for scope and cost, inspecton and mobilization of rig and third parties, Review and approve the Well Program with the Designated Technical and Operational Authorities, conducting pre spud meetings, verify well delivery completed, review performance against risk register and risk budget, document lessons learned, update and close all project records and demobilize all project resources. Functions as the client interface responsible for efficient and profitable management of the contract by coordination of all HPM resources, PSL's and Third Party services for the safe execution of a Project. Forecasts and plans activity long term and medium term to ensure that all elements are in place for successful operations. Maintains a current understanding of all regulations and issues affecting a Project. Enforces policies and procedures regarding work safety and service quality and document incidents quickly and accurately. Accountable for the training & development of all project personnel and their competency development. Confirms all personnel involved have the required certifications and competencies. Recommends changes for improvements and reports all matters which affect HPM Policies & Procedures to PM Region Manager. Maintain a positive attitude, professionalism and discretion at all times and excellent communication skills and the ability to work successfully with a wide variety of people at different levels within the organization. Demostrates strong leadership skills and client intimacy/interface. Requires a bachelor degree in a suitable S.T.E.M. (Sceince, Technology, Engineering or Mathamatics) field, and 8+ years of related experience, and a minimum of 4 years of full time oil and gas experience preferably with exposure Drilling, Intervention, and Completions Projects, with some level of P&L and contracts management exposure. Supervisory experience is essential with demonstrated ability to manage a team. Qualifications Location 2nd Floor, Worldmark 3,, Gurgaon, Haryana, 122018, India Requisition Number: 199737 Experience Level: Experienced Hire Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time

Back Who are we At BCE Global Tech, immerse yourself in exciting projects that are shaping the future of both consumer and enterprise telecommunications This involves building innovative mobile apps to enhance user experiences and enable seamless connectivity on-the-go Thrive in diverse roles like Full Stack Developer, Backend Developer, UI/UX Designer, DevOps Engineer, Cloud Engineer, Data Science Engineer, and Scrum Master; at a workplace that encourages you to freely share your bold and different ideas If you are passionate about technology and eager to make a difference, we want to hear from you! Apply now to join our dynamic team in Bengaluru We're seeking a seasoned and passionate Director of Operations and Delivery with 15+ years of proven success in leading and delivering exceptional operational outcomes This is a critical role that will shape the future of our operations, drive innovation, and foster a high-performing culture As our Director of Operations and Delivery, you'll play a pivotal role in leading the end-to-end delivery of our business objectives You'll collaborate closely with business units and enterprise architecture to set strategic goals, oversee day-to-day operations, and drive continuous improvement Key Responsibilities Lead and InspireLead multi-disciplinary teams across different business units, fostering a high-performing and motivated environment Drive Strategic DirectionDefine and execute the operational strategy, aligning with business objectives and growth goals Collaborate and InnovatePartner with Canadian leadership to identify and execute new business opportunities Deliver ResultsDevelop and implement initiatives that drive business results, improve efficiency, and maximize impact Build and DevelopAddress the challenges of building and developing an in-house team of top talent Foster GrowthWork with HR and Talent Acquisition to attract, develop, and retain the best talent Embrace InnovationOperate with a "TechCo" mindset, leveraging technology to innovate and deliver outstanding customer experiences Mentor and LeadMentor and guide senior managers, engineers, and architects, fostering the next generation of leaders Required Qualifications To Be Successful In This Role Bachelors degree in Engineering, Computer Science, Electrical Engineering, or equivalent experience 15+ years of experience in software engineering with a strong leadership background in operations, preferably managing global accounts Proven leadership skills with a strategic, visionary, and collaborative approach Data-driven decision-making with the ability to analyze data and translate it into actionable strategies Excellent communication and negotiation skills with the ability to build strong relationships and influence stakeholders Demonstrated success in leading change management, operational transformation, and implementing critical changes Experience leading and managing large teams in a senior management capacity Additional Information Job Type Full Time Work ProfileHybrid (Work from Office/ Remote) Years of Experience15-20 Years LocationBangalore What We Offer Competitive salaries and comprehensive health benefits Flexible work hours and remote work options Professional development and training opportunities A supportive and inclusive work environment

Injunction Mould Assembly, Drilling, Fitting, Turning, Flexi working Over time allowance Annual bonus Performance bonus Assistive technologies Accessible workspace