27 Dpt Jobs

Responsibilities: * Prepare GST returns, LUT, TDS filings, ITRs & IEC applications, annual compliances in MCR, WB Prof Tax etc with accuracy. * Accounting and book keeping and handle tax matters.

As an experienced Inspector, you will be responsible for reviewing contractual requirements such as technical standards and specifications, identifying any execution or inspection issues that may arise. Your primary duties will involve the inspection of Pressure Vessels and components including Filters, Boilers, Storage Tanks, etc. You will oversee the inspection process from the raw material stage to the final stage, ensuring compliance with codes and standards like ASME Sec-VIII. This will involve reviewing documents like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, and conducting stage-wise inspections of welding and fabrication processes. In addition to Pressure Vessels, you will be involved in inspecting Piping systems for Process Plants. Your responsibilities will include conducting stage-wise inspections, components inspections, dimensional checks, and spool inspections at fabricators" sites. You will also be tasked with inspecting Pipes & Tubes, following ASTM, IS, and API standards from the raw material stage to the final inspection. This will involve reviewing documents, conducting various tests such as U.T., Eddy-current testing, MPT, Hydro-test, mechanical tests, and ensuring compliance with different grades. Furthermore, you will be responsible for inspecting piping components like Flanges, Fittings, Valves, Pumps, and conducting various testing activities as per applicable piping codes and product standards. Your expertise will also be required in the inspection of Castings, particularly critical components like Shafts, Roller assemblies, Gears, Mill Heads. This will involve activities such as Raw Material Identification, physical & chemical testing, U.T., M.P.I., D.P.T., and final inspections after machining. Moreover, your role will include inspecting Steel structures for hydro power plants, focusing on structural parts of hydropower projects such as radial gates, surge shafts, trash racks, as well as other structural elements like trusses and towers. You will be responsible for selecting the most appropriate inspection techniques, coaching and supervising inspectors, conducting vendor assessments, and managing project coordination. Your expertise will be crucial in preparing and implementing inspection checklists, coordinating and managing projects for inspection of bought-out items, site inspections, and fabricated structural parts. Your attention to detail, knowledge of codes and standards, and ability to ensure compliance with quality control and quality assurance requirements will be essential in this role.,

Post- Senior Engineer and Assistant Manager Email - punejobs02@gmail.com Contact - 9356395439 Location - Pune Chakan Alandi Phata Education: A degree in engineering, manufacturing, or a related field is often preferred. Experience: 8 to 10 Year Prior experience in quality assurance or fabrication, Heavy fabrication, NDT, Powder coating, Painting environment is typically required. Technical Skills: Knowledge of quality control methodologies, tools (like Six Sigma,7QC Tool), and fabrication processes. Role & responsibilities Key Roles and Responsibilities 1. Quality Assurance Oversight: Assist in developing and implementing quality assurance processes and standards. Conduct regular audits and inspections of fabrication processes to ensure compliance with quality standards. 2. Team Management: Supervise quality control inspectors and technicians. Train staff on quality control procedures and standards. 3. Data Analysis: Analyze quality control data to identify trends, defects, and areas for improvement. Prepare reports on quality metrics for management review. 4. Problem Solving: Investigate quality issues and coordinate with fabrication teams to implement corrective actions. Facilitate root cause analysis for defects and non-conformances. 5. Documentation and Compliance: Maintain accurate records of inspections, tests, and quality control activities. Ensure compliance with industry standards, regulations, and company policies. 6. Collaboration: Work closely with engineering, production, and supply chain teams to enhance product quality. Participate in cross-functional teams to improve fabrication processes. 7. Continuous Improvement: Drive initiatives for continuous improvement in quality processes and systems. Stay updated on industry trends and best practices in quality management. 8. Customer Interaction: Address customer complaints related to product quality and provide timely resolutions. Gather feedback from customers to inform quality improvements.

As an experienced Inspection Engineer, you will be responsible for reviewing contractual requirements such as technical standards and specifications. Your role involves identifying and highlighting any execution or inspection issues that may arise. You will conduct thorough inspections of Pressure Vessels and components, including Filters, Boilers, and Storage Tanks, from the raw material stage to the final stage. Adhering to codes and standards like ASME Sec-VIII, you will review documents like QAP, WPS, PQR, WPQR, and ensure material identification and applicable testing. Your duties will also include stage-wise inspection of welding and fabrication processes, NDT, joint fit-up, welding inspection, and final inspections like leakage testing using hydraulic and pneumatic methods. In addition, you will be responsible for inspecting Piping systems for Process plants. This includes conducting stage-wise inspections, dimensional checks, spool inspections at fabricators" sites, and ensuring compliance with relevant standards. Your role will also involve the inspection of Pipes & Tubes, particularly ERW & SS pipes following ASTM, IS, and API standards. This will entail overseeing the inspection process from the raw material stage to the final inspection, which includes various testing methods like U.T., Eddy-current testing, MPT, Hydro-test, and mechanical tests. Furthermore, you will be tasked with inspecting piping components such as Flanges, Fittings, Valves, and Pumps, ensuring compliance with piping codes and product standards. As part of your responsibilities, you will conduct inspections of Castings, focusing on critical components like Shafts, Gears, and Mill Heads. This will involve activities such as Raw Material Identification, physical and chemical testing, U.T. inspections, M.P.I., and D.P.T. Moreover, you will be involved in inspecting Steel structures for hydro power plants, including structural parts of hydropower projects like radial gates, surge shafts, and trash racks. Your duties will encompass M.P.I., D.P.T., and UT inspections of structural components. Additionally, you will be responsible for Vendor Assessment activities, which involve auditing documentation, quality control, and quality assurance processes at vendors" sites. You will assess the effectiveness of QMS implementation, product testing, and conduct capacity assessments of manufacturing facilities. Your role will also include project coordination and management tasks such as preparing and implementing inspection checklists, coordinating inspections of bought-out items and site inspections, as well as managing projects for fabricated structural parts.,

Deloitte is looking for T&T - Cyber - DPT - AM - Saviynt to join our dynamic team and embark on a rewarding career journey Collaborate with cross-functional teams to achieve strategic outcomes. Apply subject expertise to support operations, planning, and decision-making. Utilize tools, analytics, or platforms relevant to the job domain. Ensure compliance with policies while improving efficiency and outcomes.

Deloitte is looking for T&T - Cyber - DPT - Consultant - OKTA to join our dynamic team and embark on a rewarding career journey Undertake short-term or long-term projects to address a variety of issues and needs Meet with management or appropriate staff to understand their requirements Use interviews, surveys etc to collect necessary data Conduct situational and data analysis to identify and understand a problem or issue Present and explain findings to appropriate executives Provide advice or suggestions for improvement according to objectives Formulate plans to implement recommendations and overcome objections Arrange for or provide training to people affected by change Evaluate the situation periodically and make adjustments when needed Replenish knowledge of industry, products and field

Basic instrument knowledge knowledge about GD&T & NTD Level 2 Certified Updates job knowledge by participating in educational opportunities and reading technical publications, Keeps measurement equipment operating by following operating instructions

Quality Lead / Quality Manager Job Location: Sanjan, Gujarat Education : Degree in in Mechanical Engineering, Industrial Engineering, or a related eld. Experience required is 10+ (Ten) years. Mostly experience in quality assurance, preferably in the fabrication or powder coating industry. Certifications 1. Certication in NDT LEVEL -II (DPT). 2. CSWIP 3.1. 3. NACE LEVEL -I. 4.Certications in Quality Management Systems (e.g., Six Sigma, ISO 9001) are a plus. also KNOWLEDGE: 1. Well versed with steel wire, steel structure codes and local/international standards like IS, ASTM, BS. 2. Knowledge of Management systems ISO 9001, ISO 14000 & ISO 45000. 3. Understanding of RCA & CAPA, Why Why analysis, 7 QC Tools, 8D, etc. 4. 5S 5. Deviation Handling 6. Know-how of selection of Testing method for Raw Material, Semi-Finished Good and Finish Good as per product and process characteristics 7. Principles of Six Sigma and Lean Manufacturing 8. Calibration. 10. Proven experience in managing quality teams and driving process improvements. 11. Familiarity with ERP systems or quality management software. DETAILED JOB DESCRIPTION: 1. Quality Assurance & Control Develop and implement quality control processes and standards for fabrication and powder coating operations. Conduct regular inspections and audits of raw materials, in-process production, and nished products. Establish and monitor KPIs for quality performance and product reliability. Investigate and resolve quality issues, implementing corrective and preventive actions (CAPA). 2. Process Improvement Lead initiatives to reduce defects, waste, and rework in fabrication and powder coating processes. Collaborate with production and engineering teams to optimize manufacturing processes for better quality outcomes. Introduce new testing methods, tools, and technologies to improve quality control efciency. 3. Team Leadership Manage and train the quality assurance team, ensuring adherence to company standards and best practices. Foster a culture of quality awareness and continuous improvement among employees. 4. Compliance & Documentation Ensure compliance with ISO standards, safety regulations, and customer-specic requirements. Maintain detailed documentation of quality processes, test results, and compliance records. Prepare quality reports for senior management and clients. 5. Customer Focus Address customer complaints and feedback related to product quality. Collaborate with the sales and customer service teams to understand client expectations and improve satisfaction.

Explore Our Hospital Connect with Us Our Regional Presence Career Opportunities HIS Software LIS Software More Home Appointments Consultation Schedule Appointment Booking Health Check-Up Packages Blood Analysis Packages Healthcare at Doorstep Diagnostic Services Cashless Services Cashless Mediclaim (TPA) Swasthya Sathi West Bengal Health Scheme ESI Scheme DNB Programs DNB Programmes (NBEMS) DNB - DMRD Paramedical Courses Paramedical Education Hub Laboratory Tech - DMLT Radiography - DRD Physiotherapy - DPT Dialysis Technology - DDT Critical Care - DCCT OT Technology - DOTT Optometry - DOPT ECG Technology Neuro Electro Physiology Paramedic Student Corner Apply Today Reach Us Explore Our Hospital Connect with Us Our Regional Presence Career Opportunities HIS Software LIS Software Home Appointments Consultation Schedule Appointment Booking Health Check-Up Packages Blood Analysis Packages Healthcare at Doorstep Diagnostic Services Cashless Services Cashless Mediclaim (TPA) Swasthya Sathi West Bengal Health Scheme ESI Scheme DNB Programs DNB Programmes (NBEMS) DNB - DMRD Paramedical Courses Paramedical Education Hub Laboratory Tech - DMLT Radiography - DRD Physiotherapy - DPT Dialysis Technology - DDT Critical Care - DCCT OT Technology - DOTT Optometry - DOPT ECG Technology Neuro Electro Physiology Paramedic Student Corner Apply Today Reach Us Explore Our Hospital Connect with Us Our Regional Presence Career Opportunities HIS Software LIS Software

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to support our Quality Assurance and Quality Control operations. The ideal candidate will have 3-7 years of experience in fabrication and inspection of filtration systems, pressure vessels, and related process equipment. The role involves hands-on inspection, quality documentation, coordination with third-party inspection agencies, and ensuring compliance with industry standards. Key Responsibilities: Conduct in-process and final inspections of pressure vessels, filters, strainers, and associated fabrication work. Review and interpret engineering drawings, WPS/PQR, and material specifications for compliance. Prepare and maintain quality documentation , including inspection reports, test certificates, traceability records, and material test reports (MTRs). Coordinate with third-party inspection agencies (TPI) and clients during stage and final inspections. Support NDT activities including radiography, dye penetrant testing, ultrasonic testing, etc. Verify compliance with ASME, PED, IBR, and other applicable standards and codes. Participate in internal audits and assist in preparing for customer audits and QA documentation. Maintain calibration records and ensure availability of required inspection instruments. Raise non-conformance reports (NCRs) and work with production and engineering to implement corrective actions. Ensure the implementation of quality systems and continuous improvement practices across the shop floor. Qualifications & Skills: Diploma/Bachelors degree in Mechanical Engineering or equivalent 3–7 years of experience in Quality Control in a pressure vessel/fabrication-based manufacturing industry Sound knowledge of ASME Section VIII, PED, IBR , and other fabrication standards Familiarity with welding processes, NDT methods, and documentation requirements Proficient in MS Office and documentation tools Strong attention to detail and communication skills Ability to interpret technical drawings and specifications Preferred Skills: Certification in welding inspection (e.g., CSWIP, AWS-CWI) is a plus Experience working with ERP or quality management systems Exposure to Oil & Gas, Power, or Chemical process equipment inspection

Required Education: Bachelors degree in Mechanical Engineering or allied engineering stream Experience: Minimum of 10 years of experience in Nondestructive Evaluation, with at least 3 years in a leadership or senior technical role. Application of NDT in Oil & Gas industry. Certifications: Level III certification in one or more NDE methods (e.g., ASNT NDT Level III, PCN, or equivalent). Minimum 5 years since obtaining first Level III or equivalent certification. Technical Skills: Expertise in multiple NDE techniques such as UT, RT, MT, PT, ET, or VT. Expertise in multiple NDE techniques such as UT, RT, MT, PT, ET, or VT. Expertise in advanced NDT techniques such as PAUT, ToFD, PECA, tube-inspection, laser scanning, QSR. Proficiency with NDE equipment, software, and interpretation / data analysis tools. Knowledge of materials science, metallurgy, or structural integrity principles. Roles and Responsibilities 1. Project Technical Leadership: Provide technical leadership on NDE-related projects and assignments, from proposing to planning through execution, ensuring timely delivery/submissions and adherence to quality standards. 2. Operational Planning: Develop and implement resource plans to meet project requirements 3. Technical Expertise: Provide advanced technical guidance in the development, implementation, and optimization of NDE techniques (e.g., ultrasonic testing, radiography, magnetic particle inspection, eddy current testing, etc.). Act as corporate Level 3 in training, consulting and project related activities. 4. Innovation and Operational Excellence: Drive continuous improvement in NDE processes, tools, and technologies to enhance efficiency, accuracy, and reliability of inspections. 5.Collaboration: Work closely with local and global teams to integrate NDE solutions as part of project executions as well as product developments. 6. Standards Compliance: Ensure all NDE activities comply with applicable industry standards (e.g., ASNT, ASME, API, ISO), regulatory requirements, and Oceaneering as well as customer specific procedures.

QA/QC Assembly CIPET(DPT & PGDPPT) / ITI PPO/ B.E., B.Tech, Diploma in Plastic/ B.E., Diploma Mechanical/ BE MFG

QA/QC Assembly CIPET(DPT & PGDPPT) / ITI PPO/ B.E., B.Tech, Diploma in Plastic/ B.E., Diploma Mechanical/ BE MFG

• ETL (extract, transform, and loading) Azure,SQL,Snowflake, data factory,

Role & responsibilities: Quality check of delivered equipment, spares, installation, repair and maintenance at site & store. Conduct inspection against QA checklist, PO or Quality plan. Devise quality testing methods (MQP/QP) and carry out acceptability tests based on indents. Conduct prioritized check point surveillance of project through contractual quality plan. Manage post repair quality checks. Monitoring of Thickness survey, Fit-up, Welding, RT, UT & DPT Process, oxide scale measurement, application of protection shield in boiler, Heat treatment of weld joints etc. Conduct welder test, control over low hydrogen electrodes, PMI, Hardness test in boiler during Shutdown & Annual Overhauling. Inspection of valves though blue matching for boiler & turbine areas. Functional Competence Requirement: Knowledge of welding technology. Knowledge of destructive and non-destructive testing methods and having qualified NDT Level-2 in RT, UT, DPT, MPI. Know-how of metallurgy and material testing (PMI). Knowledge of national and international quality and testing standards (Like ASME Section IX, B31.1 Power piping, ASME Section VIII). Basic awareness of Testing Procedures in different engineering disciplines. Knowledge of Welder test for boiler & Radiography film interpretation. Knowledge of power plant equipment, spares & engineering drawings, turbine and its major equipment. Knowledge of Computer with MS office (Word, Excel, Power point), Google sheets & Report preparation etc.

Focus expertise Major exposure to welding and welded components and products and related testing and expertise Good command in Welding like TIG,MIG,GMA,FMA Welding process, Preparing WPS , Finding the defect on welding and correcting it. Preparing welding procedure and testing follow the standard of EN-15085,ISO-5817,ISO-14002-3,ISO-15607 Detect the welding defect and drive welding quality with vendor and adhereing to WPS Expertise in welding inspections through Radiography, visual inspections ,performed LPT testing DPT testing Ability to work closely with welders and driving product quality 1. To ensure all the products, processes and suppliers (Internal and External) are in line with organisational guidelines/SOP laid for quality and QMS and certification requirements 2. To Investigate, analyze and resolve supplier quality problems by conducting audits, analyzing defect trends and leading continuous improvement projects. 3. Liasioning with various certifying agencies to organise and achieve various product/compliance certifications 4. Handling Third Party Customer Inspections Experience:- experience in QA/QC with promising experience in spearheading Supplier & Product Quality as well as handling ISO 9001:2008/2015 QMS Audits and other audits certifications for OEM environment with in-depth exposure of EPDM/Rubber components, welding, die-casting, fabrication, tooling, injection molding, various surface treatment process viz. galvanisation, powder coating, nickel plating, etc. Responsibilities (A) Supplier Product Quality :- 1. Work with Purchase/VD to ensure supplier performance is regularly reported and that appropriate and timely corrective actions are implemented 2. Handle Incoming, In-process and Final inspections

Work:- Prepare financial reports using DPT methodology. Perform independent price verifications for equity valuations. Conduct balance sheet analysis and general accounting tasks. Valuation & financial analysis report knowledge MIS report expert Annual bonus Provident fund Health insurance

Role & responsibilities Candidates must have at least 5 years of post qualification of CS experience. Candidates must have experience with Companies Act, LODR regulations and Secretarial Standards. Experience on board, Committees and General Meeting Compliances. Must have experience with FEMA Regulations, RBI Guidelines, Security control regulation Act/ guidelines. Knowledge of corporate governance and statutory compliance. Experience on Statutory Registers under the Companies Act, filing of statutory forms with ROC, MCA; E-filing (MCA 21, compliances Digital signatures, DIN etc.) Compliance with all the Related Party Disclosures/ MSME/ DPT. Candidates must have experience with handling matters related to Inter-Corporate loans and Investments. Interaction with external and internal auditors and other government bodies.

We are seeking a detail-oriented and experienced QA/QC Engineer to join our manufacturing team. The ideal candidate will be responsible for ensuring that our products meet the highest quality standards and comply with industry regulations. Key Responsibilities : Develop and implement quality control procedures and processes. Develop QAP / ITP with required procedures and get customer approvals for projects Conduct inspections and tests throughout the manufacturing process. Manage inspections with customers and TPI Manage quality team to ensure meeting orders CDD while ensuring all quality requirements are met with the highest standard Co-ordinate and expedite materials to ensure timely delivery of jobs, ensure receiving timely dispatch clearance from customers Prepare final documents and dossier sets and ensure customer approvals for final submissions Analyze data and prepare reports on quality metrics and trends. Identify areas for improvement in the production process and implement corrective actions. Collaborate with production teams to resolve quality issues and enhance product reliability. Ensure compliance with industry standards and regulatory requirements. Maintain documentation of quality assurance activities and audits like WPS PQR, calibration, etc. Managing audits by customers and various TPI agencies. Qualifications : Bachelors Degree in Mechanical Engineering or Diploma in Mechanical Engineering. Minimum of 10 years of experience in QA/QC within a manufacturing environment for pressure vessels or filters and strainers Experience in managing teams to ensure smooth work of the Quality department Strong knowledge of quality control methodologies and tools. Experience in working with customers such as IOCL, EIL, NTPC, NPCIL, BHEL, etc Proficient in using measuring and testing equipment. Familiarity with ISO standards and other relevant quality frameworks. Knowledge of ASME codes, material grades, welding process, painting & its testing requirement. NDT Level II in RT, DPT, MPT & UT. Able to review MTC with respective standard & specification. Strong communication and interpersonal skills. Ability to work effectively in a team environment.

Perform inspections using UT, MPI, DI/LPT, RT, and VT techniques as per project and code requirements. Select appropriate NDT methods based on material, defect type, and testing environment. Ensure proper calibration and function

DESIGNATION: Quality Manager Location : Mumbai (Western Suburbs) Years Of Experience : 10+ years Qualification : BE.Civil Industry : Real Estate

Extrusion process (Pipe and Compounding), HDPE pipes Knowledge of Additives and Compounding Maintain Log sheet of m/c Maintain Shop floor as per 5S & ISO Filling the check list and observing the final product report. Required Candidate profile Self Confidence Ability to work efficiently in a team as well as independently Commendable ability to work in pressure situation and to meet deadlines Committed and highly motivated Plastics knowledge

Need candidates from real estate background only Candidate should have experience in quality engineering Allocate department resources and manage project and resource priorities Maintain management awareness of quality issues and promote quality Required Candidate profile Candidate should be qualified in civil engineering for Quality Assurance . Acquire and develop the necessary resource skills to fulfill all quality functions . Handling material Inspection Reports .

Role & responsibilities 1. Monitoring of all activities related to preventive & periodic maintenance of all areas of plant, for smooth & trouble free operation. 2. Monitoring & Ownership of CEMS system, Ensure maintenance & calibration activities for smooth & trouble free operation of system. Maintain documentation as required by External bodies. 3. Close monitoring on indenting, PO & WO and maintaining 100% critical spares for 100% availability of plant from C&I side. 4. Monitoring of shift operations for smooth & trouble free operation of plant. 5. Close monitoring of departmental activities to achieve 0% Incident/Accident in plant/area make sure to use PPE & follow work permits. 6. Follow up with system OEMs for annual maintenance, health check & calibration activities. 7. Follow up & make sure to fill check list on daily basis related to critical equipment on which 100% dependency of plant. 8. Monitoring & healthiness checking of plant networking, Profibus Modbus & ethernet communication. 9. Equipment up gradation modification & retrofitting of Chinese existing system. 10. Monitoring & preventive health check for all types of plant/furnace cameras. 11. Make sure for system earthlings should be perfect. Time to time checking of healthiness. 12. Maintain system/equipment related Software, CDs, manuals & documentation. 13. Guiding all subordinates for in time trouble shooting

Role & responsibilities Carry out NDT and prepare required reports Coordinate with external service providers for radiographic testing, evaluate results and prepare reports Coordinate with external labs for chemical and mechanical testing Maintain records of all NDT conducted across products Review and highlight non-conforming products and deviations Preferred candidate profile Incumbent with minimum 5 years experience &NDT Level 2 certification is required. Should be qualified & experienced minimum in the following 4 techniques. UT (ultrasonic Testing) RT (Radiographic Testing) MPT (Magnetic Particle testing ) DPT/LPT (Dye/Liquid Penetrant Testing)