16 Document Creation Jobs

The Domain Architect / Engineering Manager Radio Communication system is expected to create/ develop the Design deliverables of the Radio Communication System like GSM-R, TETRA / LTE technology and IP EPABX system for Mainline and MRT Projects in the EDRC telecom. He will further assist and provide the required deliverables to the bidding team and support the executions works for site configurations RF planning and Numbering plan design and simulation studies. Radio Communication (TETRA, GSM-R & LTE): The person should know the desired technological skills of the Radio communication in the field of TETRA - Terrestrial Trunked Radio, ETSI Protocols, GSM-R related Specifications awareness and EIRIENE Importance in the field of Radio Communication, LTE Technology and 3GPP Standards and latest releases, 5G and FRMCS. Radio Network Planning and RF Prediction and Planning knowledge Knowledge of the Special Tools and Tackles applicable for Radio like ATOLL Simulation tool, Radio Spectrum Tool, Radio Test Tool, RF Power meter, Drive test tool. Fleet Map, Traffic and Bandwidth calculation 5G Radio FRMS guidelines knowledge Knowledge of RAMS and EMC Applicable to Radio - Telephone System and Central Digital Recording Server: Knowledge of IP-PABX System, Direct Line Phone and Console Knowledge of Ways side and Hot line Phone Knowledge of the Voice recording and centralized Voice Mail System Knowledge of Traffic calculation for MRT and Mainline Project Knowledge to create logical network, Network topology for PABX Integration of PABX on SIP with PA and Radio System Knowledge of Analog and Digital Trunks - CO, PRI-ISDN etc. Knowledge of MIB, SNTP, SNMP, Q-SIG, TCP/IP, ETSI protocols NMS Configuration and designing Knowledge of RAMS and EMC

Role: AVP- Governance and Controls Analyst Location: Noida Package: up to 26 LPA About the Role: Join the Wholesale Lending team as a Governance and Controls Analyst where you will support the development and execution of control frameworks, reporting, and strategic improvements to enhance operational efficiency and regulatory compliance. This role is ideal for professionals with a keen eye for detail, risk awareness, and strong analytical and communication skills. Key Responsibilities: Monitor and support lending operations to ensure compliance with governance frameworks. Perform reviews, process evaluations, and issue resolution to strengthen internal controls. Develop reports and presentations for internal stakeholders. Collaborate across teams to align procedures and drive control enhancements. Contribute to risk mitigation strategies and process improvements. Stay updated on industry trends and help adopt best practices. What Were Looking For: 8+ year of experience in Governance, Risk and Control, Case Management, Project Management, Document Creation in Banking domain Strong analytical, reporting, and communication skills. Working knowledge of MS Excel and PowerPoint. Ability to work independently and within cross-functional teams. Detail-oriented mindset with a focus on continuous improvement. Preferred Qualifications: MBA or equivalent academic background in finance or related fields. Familiarity with lending products or financial operations is a plus (not mandatory). For more details: Call Kanika 9953939776 or email resume to kanika@manningconsulting.in

As a Mechanical Engineer Expediter / Cost Control with a minimum of 10+ years of experience, you will have the following roles and responsibilities: Expediting Responsibilities: - Monitor and ensure timely delivery of materials, equipment, and services required for projects. - Liaise with vendors, suppliers, and contractors to track order status and resolve any delays or issues. - Review and maintain procurement schedules to align with project timelines. - Conduct regular follow-ups and provide updates on order progress to project stakeholders. - Coordinate with logistics teams to ensure efficient transportation and delivery of goods. - Verify that all materials and equipment meet specified quality and technical standards before acceptance. Cost Control Responsibilities: - Develop and maintain project budgets, ensuring alignment with project objectives. - Collaborate with procurement teams to achieve cost savings through negotiations and alternative sourcing strategies. - Identify and manage cost risks, implementing measures to mitigate financial impact on the project. Documentation and Reporting: - Maintain detailed records of purchase orders, invoices, delivery notes, and cost reports. - Generate regular progress and cost control reports, including Key Performance Indicators (KPIs). - Ensure proper documentation of all communications with vendors and suppliers. - Support audits and reviews by providing accurate and complete records. Cross-Functional Collaboration: - Work closely with project managers, procurement, and engineering teams to align on project requirements and priorities. - Collaborate with quality assurance teams to address non-conformance issues and ensure resolution. - Facilitate effective communication between internal and external stakeholders to ensure smooth project execution. Skills and Qualifications: - Bachelor's degree / Diploma in Mechanical Engineering. - Strong understanding of Project management, procurement, and cost control processes. - Must have EPC Project experience with the Knowledge of Rotary & static equipment (Pumps, Motors, CPU, Condenser, Heaters, deaerators). - Proficiency in relevant software tools (e.g., MS Excel, SAP/ERP systems). - Excellent analytical and problem-solving skills. - Strong communication and interpersonal skills to liaise with diverse stakeholders. - Ability to work under pressure and meet tight deadlines. - Knowledge of industry standards, codes, and regulations related to mechanical engineering.,

As a Documentation Assistant, you will play a crucial role in managing and organizing various types of documents to ensure accuracy, accessibility, and compliance with company policies and procedures. Your responsibilities will include maintaining document control systems, assisting with document creation and review, and ensuring proper storage and retrieval of files. Additionally, you may be involved in document distribution, reporting, and training related to documentation practices. Your key responsibilities will involve maintaining and managing document control systems, which includes version control, access permissions, and archiving. You will also assist in the preparation, review, and formatting of documents to ensure accuracy and adherence to standards. Organizing and maintaining physical and electronic files for easy access and retrieval will be another important aspect of your role. Ensuring timely and accurate distribution of documents to relevant parties, both internally and externally, will also be part of your duties. You will be expected to provide regular reports on document status, including metrics and indicators related to document control activities. Additionally, you will provide guidance and support to other employees on documentation processes, systems, and best practices to ensure smooth operations. This is a full-time position suitable for freshers. The benefits include Provident Fund, and the work schedule is during the day shift. The work location is in person. If you are looking to kickstart your career in documentation management and possess strong organizational skills and attention to detail, this role as a Documentation Assistant could be the perfect fit for you.,

Key Responsibilities & Requirements Hands-on experience in processing of Alkyd and Acrylic Resins . Hands-on experience for in-process and quality parameter checks related to resin processing and understanding parameters which impact final paint quality. Hands-on in developing and designing Process Flow Diagrams for resin processing. Hands-on experience in operating critical equipment such as Reactors, Blenders, Powder Handling systems, Filtration Systems, Transfer Pumps and thorough know-how of the same. Hands-on experience with Process Automation (DCS/MES) and associated field instruments . Strong knowledge of deviations and troubleshooting related to resin processing. Understanding of raw materials and ingredients (liquid chemicals and powders) used in resins and their functions (including MSDS - Material Safety Data Sheet ). Basic knowledge in reading and interpreting P&IDs , equipment layout drawings , engineering drawings , and technical data sheets . Responsible for day-to-day processing of resins as per the production plan. Accountable for achieving daily production targets of resin batches. Accountable for achieving target batch cycle times through efficient operation of reactors, filtration systems , and by strictly following process instructions and quality procedures . Ability to analyze resin batch data to identify trends and recommend process optimizations for improving productivity, cost-efficiency, and batch quality. Desired Skills and Experience Document Creation, Production Activity Control, Production Planning, Planning (Scheduling)

Key Tasks and Responsibilities of a Document Controller: Document Creation and Formatting: Create templates for various types of documents. Ensure documents adhere to the organization's formatting and styling guidelines, as well as client requirements. Verify that all necessary information is included in the documents. Document Review and Approval: Ensure documents are sorted correctly and distributed to relevant stakeholders for review. Track and follow up on the status of document review and approval. Ensure reviewed documents are uploaded to relevant portals. Document Distribution: Distribute approved documents to the respective individuals or departments. Ensure that the correct versions of documents are circulated. Version Control: Maintain a version control system for documents to track changes and ensure the latest version is always accessible.

Design & Development of Power Electronics products like Motor Drives & Power Converter like DC/DC, inverters etc. for Military applications, Technical Offer preparation, Binding Data Drawing and PLM release activity. Design of DC/DC converters & Drives, converter topology selection, simulations, Filter design, Conceptualizing products for Defence Applications, development and testing of Prototypes. Product ionization of prototypes Engineering of existing products to meet Military applications, Interaction with cross-functional design teams and vendors for sub system design. Conceptual design of new Power Electronics products from specification and its realization. Hands on design in power converters, drives or subsystems circuits like gate driver, power stacks etc. Experience in design or testing of Medium voltage 690VAC or above converter/drives would be good. Experience in design of Rugged Power Electronics converters or drive for Military applications. Experience in design selection of Electronics component and it best uses. Knowhow of detailed application engineering of product. Good in Technical acumen and problem solving and solution oriented skills. Hands on experience in controller board testing and debugging skills. Preferred Industries: Power Electronics product companies like: ABB, GE, APC, Eaton, Honeywell, Centum, Tata Power SED , EATON, SCHNEIDER ELECTRIC, Any EV segment Industries etc

Job Title : Assistant/Deputy Engineer - Electrical Maintenance Job Description : We are looking for a skilled Maintenance Engineer with a strong background in control panel design, commercial electrical design, and technical documentation . The ideal candidate will support automation initiatives, preventive maintenance, and lead technical improvements to enhance machine performance and reduce downtime. Key Responsibilities : Perform routine inspections and execute preventive maintenance for machinery. Analyze equipment failures and implement corrective and improvement measures. Evaluate machinery for upgrades or replacements based on operational performance. Collaborate with the production team to minimize machine downtime. Manage spare parts inventory and ensure availability of critical components. Provide support for machine automation and related electrical systems. Develop and maintain preventive maintenance schedules . Monitor equipment performance trends and suggest technical improvements. Train and develop technicians , enhancing skillsets within the maintenance team. Must-Have Skills : Control Panel Design Commercial Electrical Design Document Creation & Maintenance Preventive Maintenance & Troubleshooting Automation System Support Spare Parts Inventory Management Team Training & Development

Qualification & Preference: Engineering Graduate with Mechanical / Aerospace domain. Years of Experience: 8 to 10 years In over all work experience Minimum 3 years Experience in handling Aerospace /Defence domain projects. Job Details: Candidate will be responsible for Project management activities for aerospace programs. Candidate should able to take the following responsibilities. Team management - Could able guide and lead the team to meet the contractual milestones. Customers and stake holder management - Responsible for the Customer communication and commitments. Effectively able to manage the stake holders to meet project delivery time line. Project Planning and Execution - Responsible for the Project execution and delivery planning and managing all the stake holders to meet the milestones with 100% On time delivery. Cost control - Responsible for Project cost monitoring and achieving the budgeted sales on every quarter and completing the project with in the budgeted cost. Supporting BU Marketing for Tech/commercial offer for service / training enquiries.

Job Title: Assistant Manager - Engineering & Design Job Description: We are looking for a Sheet Metal Design Engineer who will be responsible for designing and developing sheet metal components and systems for our manufacturing operations. The ideal candidate should have experience in control panel design, SPMs, and technical documentation. Key Responsibilities: Design and develop sheet metal components and assemblies. Create detailed engineering drawings and technical documentation. Perform material selection and conduct cost analysis. Collaborate with cross-functional teams to optimize design solutions. Conduct stress and structural analysis to ensure design integrity. Oversee fabrication, assembly, and installation of sheet metal products. Ensure compliance with industry and safety standards. Troubleshoot and resolve manufacturing or design-related issues. Implement and maintain quality control procedures. Provide technical guidance to junior engineers and shop floor teams. Document and standardize manufacturing processes and best practices. Keep abreast of the latest developments in sheet metal technologies. Qualifications & Skills: BE/Diploma in Mechanical Engineering or related field Proficient in CAD tools (e.g., AutoCAD, SolidWorks) Experience in sheet metal design and fabrication processes Understanding of CNC machining and laser cutting operations Knowledge of engineering standards, manufacturing practices, and safety compliance Excellent communication and documentation skills Strong analytical and problem-solving capabilities Project management and leadership experience is a plus Certification in welding or sheet metal work is an added advantage Ability to work under pressure and deliver on tight deadlines Skills Required: Control Panel Design SPM (Special Purpose Machines) Document Creation

We are seeking a dedicated and detail-oriented Junior Technical Writer to join our Documentation team. The successful candidate will be responsible for creating clear, concise, and comprehensive technical documents for projects related to the Ministry of Home Affairs (MHA) and Ministry of Defence (MoD). This includes writing user handbooks, technical manuals, and other related documentation. Develop and write user handbooks, technical documents, and manuals for MHA and MoD-based projects. Research and comprehend technical terms, concepts, and drawings to produce accurate documentation. Collaborate with engineers, product managers, and other stakeholders to gather necessary information. Ensure that all documentation adheres to company standards and is up-to-date. Utilize tools such as MS Word and, preferably, RoboHelp and Adobe Suite for document creation and editing. Qualification : Any Engineering degree. Experience: 0-2 years of experience in technical writing or a related field. Key Skills: Excellent English writing skills with a strong command of grammar and style. Ability to comprehend and document technical terms and engineering drawings. Strong research skills and the ability to write clear, concise, and user-friendly documentation. Proficiency in MS Word. Knowledge of RoboHelp and Adobe Suite is preferable but not mandatory. Good interpersonal skills for effective collaboration with team members. Patience and perseverance to handle detailed and potentially complex technical documentation tasks. Interview Process: Technical Round 1 : Written Test Technical Round 2 : Technical Team HR interview 3 : Head HR Final Interview 4 : CMD sir

Excellent communication skills both oral and written 2. Ability to work in tight deadlines, and handle pressure situations 3. Experience in interaction with US clients on a regular basis 4. Ability to organize, track, and maintain large number of volumes 5. Quick learning skills (various processes in each stage of documentation) 6. Knowledge on Documentation Development Life Cycle (DDLC) 7.Knowledge onSoftwareDocument Development Life Cycle (SDLC) 8. Experience in working on the following:MS Word, FM, Epic editor/XML authoring 9.DITA concepts 10. Content management system 11 PLM / project tracking tool 12.Hands on experience in writing ServiceManuals, UserManuals, Helpmanuals,software release notes/guides Preferred : Good leadership skills. Effective communication and interpersonal skills. Right business acumen and aligns to senior management team. Works in line with businessobjectivesand targets. An excellent team player.

Skill Document Creation, Secondary Data Analysis, Regulatory Audits Minimum Qualification B.com Working Language English, Hindi, Marathi Job Description Receipt Entries in Oracle, Bank Reconciliation, Oracle entries for AP exps.& payment entries booking for cash & bank, JV for contra & other adjustment entries, AR for CM & DMLC documentation & follow up to bank for the same, MIS, PDC handling, Online Tax Payments, Accounts Reconciliations. Assisting to prepare reports for Assessment & Yearly Statutory Audit, Other Accounting Entries, Insurance Renewals processing. Handling & maintaning documents.

1. Expediting Responsibilities: Monitor and ensure timely delivery of materials, equipment, and services required for projects. Liaise with vendors, suppliers, and contractors to track order status and resolve any delays or issues. Review and maintain procurement schedules to align with project timelines. Conduct regular follow-ups and provide updates on order progress to project stakeholders. Coordinate with logistics teams to ensure efficient transportation and delivery of goods. Verify that all materials and equipment meet specified quality and technical standards before acceptance. 2. Cost Control Responsibilities: Develop and maintain project budgets, ensuring alignment with project objectives. Collaborate with procurement teams to achieve cost savings through negotiations and alternative sourcing strategies. Identify and manage cost risks, implementing measures to mitigate financial impact on the project. 3. Documentation and Reporting: Maintain detailed records of purchase orders, invoices, delivery notes, and cost reports. Generate regular progress and cost control reports, including Key Performance Indicators (KPIs). Ensure proper documentation of all communications with vendors and suppliers. Support audits and reviews by providing accurate and complete records. 4. Cross-Functional Collaboration: Work closely with project managers, procurement, and engineering teams to align on project requirements and priorities. Collaborate with quality assurance teams to address non-conformance issues and ensure resolution. Facilitate effective communication between internal and external stakeholders to ensure smooth project execution. 5. Skills and Qualifications: Strong understanding of Project management, procurement, and cost control processes. Must have EPC Project experience with the Knowledge of Rotary & static equipment i.e. Pumps (CEP, MDBFP, Sump Pumps), Motors, CPU, Condenser, Heaters, deaerators. If Turbine erection and execution experience preferred. Proficiency in relevant software tools (e.g., MS Excel, SAP/ERP systems). Excellent analytical and problem-solving skills. Strong communication and interpersonal skills to liaise with diverse stakeholders. Ability to work under pressure and meet tight deadlines. Knowledge of industry standards, codes, and regulations related to mechanical engineering.

Good knowledge and skill in interpreting technical datas with respect to engineering subsystems and systems. Must be interested in gathering and collating technical information Good interpersonal skills, agility and task orientation Excellent verbal and non-verbal communication Must be able to deliver on-time Good proficiency with MS Office tools (word, excel and powerpoint) Hands on with tools like Arbortex, 3D Cortona, Articulate etc. will be an added advantage. . . . . . . . . . Good knowledge and skill in interpreting technical datas with respect to engineering subsystems and systems. Must be interested in gathering and collating technical information Good interpersonal skills, agility and task orientation Excellent verbal and non-verbal communication Must be able to deliver on-time Good proficiency with MS Office tools (word, excel and powerpoint) Hands on with tools like Arbortex, 3D Cortona, Articulate etc. will be an added advantage. . . . . . . . . .

Roles and Responsibilities for Mechanical Engineer - Expediter / Cost Control - Min. 10+ Years Experience 1. Expediting Responsibilities: Monitor and ensure timely delivery of materials, equipment, and services required for projects. Liaise with vendors, suppliers, and contractors to track order status and resolve any delays or issues. Review and maintain procurement schedules to align with project timelines. Conduct regular follow-ups and provide updates on order progress to project stakeholders. Coordinate with logistics teams to ensure efficient transportation and delivery of goods. Verify that all materials and equipment meet specified quality and technical standards before acceptance. 2. Cost Control Responsibilities: Develop and maintain project budgets, ensuring alignment with project objectives. Collaborate with procurement teams to achieve cost savings through negotiations and alternative sourcing strategies. Identify and manage cost risks, implementing measures to mitigate financial impact on the project. 3. Documentation and Reporting: Maintain detailed records of purchase orders, invoices, delivery notes, and cost reports. Generate regular progress and cost control reports, including Key Performance Indicators (KPIs). Ensure proper documentation of all communications with vendors and suppliers. Support audits and reviews by providing accurate and complete records. 4. Cross-Functional Collaboration: Work closely with project managers, procurement, and engineering teams to align on project requirements and priorities. Collaborate with quality assurance teams to address non-conformance issues and ensure resolution. Facilitate effective communication between internal and external stakeholders to ensure smooth project execution. 5. Skills and Qualifications: Bachelor's degree / Diploma in Mechanical Engineering Strong understanding of Project management, procurement, and cost control processes. Must have EPC Project experience with the Knowledge of Rotary & static equipment i.e. Pumps (CEP, MDBFP, Sump Pumps), Motors, CPU, Condenser, Heaters, deaerators. If Turbine erection and execution experience preferred. Proficiency in relevant software tools (e.g., MS Excel, SAP/ERP systems). Excellent analytical and problem-solving skills. Strong communication and interpersonal skills to liaise with diverse stakeholders. Ability to work under pressure and meet tight deadlines. Knowledge of industry standards, codes, and regulations related to mechanical engineering.