138 Digital Electronics Jobs

You’ll work as part of a small, highly collaborative team responsible for the entire hardware development lifecycle, from concept to production-ready design.

You will be joining Nivo Controls as a Senior Engineer in the R&D department, responsible for product development. The role will involve designing and developing process control instruments, verifying and validating products, and working on embedded product development. You will also be responsible for implementing international standards, project planning, PCB layout development, technical documentation, and coordinating with other departments. Key Responsibilities: - Design and Development of Process Control Instruments - Design Verification and Validation of Products - Embedded Product development - Implementation of International Standards including EMI/EMC, General Safety, CE Marking, and Flameproof requirements - Project Planning, Scheduling, and Execution - PCB layout development in EAGLE - Inter-departmental Coordination - Technical Documentation Qualifications: - BE/BTech/MTech in Electronics, Instrumentation, Embedded Systems - Experience: 5-10 Years Desired Skills and Experience: - Strong fundamentals in Analog and Digital development - Design and Development of Power Supplies - Embedded System development on various microcontrollers - Embedded C development on different IDEs - Knowledge of Communication Protocols including RS485/MODBUS/Ethernet-TCP - Derivation of Technical Specifications for Products - SMD Component soldering - Project and Product Documentation - High moral and ethical values Location: - Indore If you are interested in this position, please send your resume to jobs@nivocontrols.com with the job title in the subject line.,

About The Role About The Role : We are seeking a skilled Hardware Design Engineer with hands-on experience in automotive ECU circuit design and development . The role involves conducting design reviews, quality assurance activities, and supporting hardware problem-solving during development and serial phases. Key Responsibilities :Design and develop hardware circuits for automotive ECUs.Perform schematic design, simulation, worst-case analysis, derating, thermal analysis, and component selection.Conduct DFMEA, FTA, and support hardware quality assurance planning (KARTE).Review electronic schematics and component designs.Support issue resolution during development and production phases.Ensure compliance with EMI/EMC guidelines and environmental reliability standards. Primary Skills : HW Circuit Design (Automotive ECU)Schematic Design & SimulationDFMEA, FTAAnalog & Digital Electronics (Opamp, MOSFET, BJT)Power Supply Topologies (Linear, LDOs, DC-DCBuck, Boost, Buck-Boost)Microcontrollers & Communication Protocols (I2C, SPI, LIN, CAN)Memory Interfaces (EEPROM, Flash, DDR)EMI/EMC Design GuidelinesEnvironmental Reliability Testing Secondary Skills : Component Obsolescence/Shortage AnalysisAutomotive Electronics Standards & ProcessesDesign Justification & Defect History CapitalizationQuality Risk Identification & KARTE Planning About The Role - Grade Specific Focus on Electrical, Electronics and Semiconductor. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers.

You are a passionate and hands-on R&D Engineer seeking to join a growing Research & Development team at Exeliq Tech Solutions Pvt Ltd in Noida. Your role will involve designing, prototyping, testing, and validating next-generation industrial solutions, test setups, and automation platforms. You must have a solid foundation in Electrical and Electronics Engineering, along with practical experience in LabVIEW development, hardware interfacing, and system integration. Your key responsibilities will include designing and developing test setups using NI LabVIEW and NI DAQ hardware, working with analog and digital electronics to design circuits, executing test plans for product validation, and integrating sensors and actuators with embedded or PC-based platforms. You will collaborate with mechanical and software teams to create integrated prototypes, troubleshoot electronic/electrical systems, and prepare documentation including test reports and user manuals. It is important to stay updated with trends in automation, instrumentation, and Industry 4.0 technologies. To qualify for this role, you should have a Bachelor's or Masters degree in Electrical, Electronics, or Instrumentation Engineering, along with 2+ years of experience working with LabVIEW. Strong understanding of electronic components, circuits, PCB-level debugging, and experience with NI DAQ systems are essential. Familiarity with communication protocols and the ability to read schematics and use test equipment are required. Additionally, you should possess excellent problem-solving skills, hands-on attitude, and good documentation and communication skills. Preferred skills include exposure to Python or other scripting tools, experience with PCB design tools, knowledge of safety standards, and experience in developing automated test benches for industrial applications. In return, Exeliq Tech Solutions Pvt Ltd offers a collaborative and innovative work environment, real-world engineering challenges, exposure to modern tools and technologies, competitive compensation, and growth opportunities.,

Job Description Arms hardware is at the heart of the computing and connectivity revolution that continues to transform the way people live, and businesses operate. Working as a team and engaging with the worlds most famous technology companies, we are driving innovation into all areas where computation is possible. This will facilitate us to build better solutions for the billions of people using our technology worldwide based #onArm. As we continue to grow, we need the best engineers to join a team responsible for the development of sophisticated Subsystems and Solutions. Arm&aposs new Solutions Engineering Group&aposs mission is to enable our partners by delivering secure, performant, reliable hardware and software that are easy to use. Solutions Engineering&aposs Design Enablement team develops CAD flows which enables engineering teams to be successful. We are looking for a Software Engineer who will be part of the Design Enablement team, developing and deploying state of the art software to support the CAD automation framework for SOC design engineering. The candidate should be able to effectively communicate & collaborate with peers in their own team as well as with their counterparts in design engineering teams. Role & Responsibilities Development of software applications for SOC CAD Flow & Infrastructure Collaboration & communication with peers and design engineering teams for effective development & deployment of software tools. Required Skills Bachelor/Master Degree or equivalent experience in Computer Science or Electronic Engineering from a reputable institute 2-5 years of industry experience Solid understanding of Data Structures & Algorithms Proficiency in any of the relevant programming languages (Python, Java or C++) Good understanding of Object-Oriented Programming (OOP) concepts Desirable Skills: Experience in web framework, svelte, flask is plus Familiar with working in UNIX/Linux environments Good scripting skills (shell, Perl or TCL) Basic understanding of digital electronics In Return: At Arm, youll be part of a diverse, innovative, and globally distributed team. We offer an environment that encourages learning, collaboration, and technical excellence, with opportunities to work on cutting-edge technologies that shape the future of computing. Accommodations at Arm At Arm, we want to build extraordinary teams. If you need an adjustment or an accommodation during the recruitment process, please email [HIDDEN TEXT] . To note, by sending us the requested information, you consent to its use by Arm to arrange for appropriate accommodations. All accommodation or adjustment requests will be treated with confidentiality, and information concerning these requests will only be disclosed as necessary to provide the accommodation. Although this is not an exhaustive list, examples of support include breaks between interviews, having documents read aloud, or office accessibility. Please email us about anything we can do to accommodate you during the recruitment process. Hybrid Working at Arm Arms approach to hybrid working is designed to create a working environment that supports both high performance and personal wellbeing. We believe in bringing people together face to face to enable us to work at pace, whilst recognizing the value of flexibility. Within that framework, we empower groups/teams to determine their own hybrid working patterns, depending on the work and the teams needs. Details of what this means for each role will be shared upon application. In some cases, the flexibility we can offer is limited by local legal, regulatory, tax, or other considerations, and where this is the case, we will collaborate with you to find the best solution. Please talk to us to find out more about what this could look like for you. Equal Opportunities at Arm Arm is an equal opportunity employer, committed to providing an environment of mutual respect where equal opportunities are available to all applicants and colleagues. We are a diverse organization of dedicated and innovative individuals, and dont discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Show more Show less

1) Basic Knowledge of Electronic repairing, Instrument Handling. 2) Provide prompt and accurate feedback to customers. 3) Good communication skill, Troubleshooting knowledge, Mail communication and Service Documentation. 4) Job includes traveling. Required Candidate profile 1) 1-3 year experience in handling customer support department activities. 2) Good knowledge of testing of electronic & electro-mechanical instruments. 3) Ready to travel all over India. Perks and benefits On Roll - PF, ESIC, Bonus, Gratuity.

1) Basic Knowledge of Electronic repairing, Instrument Handling. 2) Provide prompt and accurate feedback to customers. 3) Good communication skill, Troubleshooting knowledge, Mail communication and Service Documentation. 4) Job includes traveling. Required Candidate profile 1) 1-3 year experience in handling customer support department activities. 2) Good knowledge of testing of electronic & electro-mechanical instruments. 3) Ready to travel all over India. Perks and benefits On Roll - PF, ESIC, Bonus, Gratuity.

General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. ORMaster's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. ORPhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Working experience (2+ years) in preferably Memory design Compiler approach of developing embedded SRAM/ROM development Fundamental know how on bit cell and its characteristics (SNM, WM, Cell current, Standby current, data retention) Fundamentals of process variability and its effect on memory design Strong understanding of Digital/Memory circuit design/layouts Critical path modeling concept, various type of models ( RC, C, Pai, ladder, distributive, etc) Good knowledge of semiconductor physics in general. Knowledge of and affinity to IC technology and IP design is mandatory

Job Overview TE Connectivity s R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise include: materials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. The Electronic and Sensor Integration Team Manager will report to the product development team for cold applied products, part of Energy Business unit. S/he will lead & be responsible for managing a team working on new product development (NPD), value analysis and value engineering (VA/VE) and sustaining projects as well as perform management duties. This role will require strong leadership skills and demonstrated product development experience in a global technology company to drive success for the Energy BU by leading his/her team to develop best-in-class engineering solutions for our customers. Responsibilities: Manage and drive the Electronic and Sensor Integration Team Demonstrate technical leadership. Provide technical solutions and break through ideas. Guide the development of complex electronic systems, including analog and digital circuits Oversee the implementation of emerging technologies such as IoT, AI, and machine learning in electronic products Ensure adherence to industry standards (e.g., IEEE, IPC) and regulatory requirements (e.g., FCC, CE) Perform resource planning and prioritization for required activities Accountable for delivering NPD projects on-time and on-budget Collaborate with product managers, mechanical teams, software developers, and system architects to integrate electronics into end products. Successfully facilitate transfer and support of new product introduction (NPI) into high volume manufacturing Participate in design reviews & project reviews Support product compliance and approvals for new products and platforms Empower team to grow and achieve results through supported development and coaching. Be a strong technical partner and provide support to product management teams. Model and foster TE core values and behaviors Desired Candidate Profile: Graduate or postgraduate (BE or M.Tech) in Electronics engineering or related engineering discipline 12+ years of engineering experience and with more than 5 years of experience in supervising and leading engineering team Experience in developing and industrializing electronic and sensor products, preferably associated with Energy market Excellent in people and resource management Strong understanding of analog/digital electronics, signal conditioning, and sensor communication protocols. Proven track record in sensor deployment for industrial, renewable, or power systems (e.g., temperature, pressure, flow, vibration, current, voltage). Experience with embedded systems, PCB design , and system-level integration. Familiarity with energy systems, including power electronics, renewable energy systems, grid interfaces, or smart metering. Familiarity with IoT platforms and cloud-based sensor data acquisition Competencies Building Effective Teams Motivating Others Managing and Measuring Work SET : Strategy, Execution, Talent (for managers)

Job Overview TE Connectivity s R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise include: materials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. The Electronic and Sensor Integration Team Manager will report to the product development team for cold applied products, part of Energy Business unit. S/he will lead & be responsible for managing a team working on new product development (NPD), value analysis and value engineering (VA/VE) and sustaining projects as well as perform management duties. This role will require strong leadership skills and demonstrated product development experience in a global technology company to drive success for the Energy BU by leading his/her team to develop best-in-class engineering solutions for our customers. Responsibilities: Manage and drive the Electronic and Sensor Integration Team Demonstrate technical leadership. Provide technical solutions and break through ideas. Guide the development of complex electronic systems, including analog and digital circuits Oversee the implementation of emerging technologies such as IoT, AI, and machine learning in electronic products Ensure adherence to industry standards (e.g., IEEE, IPC) and regulatory requirements (e.g., FCC, CE) Perform resource planning and prioritization for required activities Accountable for delivering NPD projects on-time and on-budget Collaborate with product managers, mechanical teams, software developers, and system architects to integrate electronics into end products. Successfully facilitate transfer and support of new product introduction (NPI) into high volume manufacturing Participate in design reviews & project reviews Support product compliance and approvals for new products and platforms Empower team to grow and achieve results through supported development and coaching. Be a strong technical partner and provide support to product management teams. Model and foster TE core values and behaviors Desired Candidate Profile: Graduate or postgraduate (BE or M.Tech) in Electronics engineering or related engineering discipline 12+ years of engineering experience and with more than 5 years of experience in supervising and leading engineering team Experience in developing and industrializing electronic and sensor products, preferably associated with Energy market Excellent in people and resource management Strong understanding of analog/digital electronics, signal conditioning, and sensor communication protocols. Proven track record in sensor deployment for industrial, renewable, or power systems (e.g., temperature, pressure, flow, vibration, current, voltage). Experience with embedded systems, PCB design , and system-level integration. Familiarity with energy systems, including power electronics, renewable energy systems, grid interfaces, or smart metering. Familiarity with IoT platforms and cloud-based sensor data acquisition Competencies Building Effective Teams Motivating Others Managing and Measuring Work SET : Strategy, Execution, Talent (for managers)

NUMEROS MOTORS PRIVATE LIMITED is looking for Applied Research Engineer- Electrical & Electronics to join our dynamic team and embark on a rewarding career journey Conduct research and development activities in the assigned field. Design and execute experiments and analyze data. Develop prototypes and test new technologies. Prepare technical reports and documentation. Collaborate with other researchers and stakeholders on projects.

Thales people provide armed forces customers with operational advantage at every decisive moment throughout the mission. Defence and armed forces customers rely on us to deliver the full range of defence mission systems solutions at land, sea, and air. Our platforms extend across the battlespace including Above and Sonar, Electronic Combat, and Intelligence, Surveillance and Reconnaissance systems. Senior Engineer - Digital Electronics Thales India Engineering Competency Center in Bangalore is seeking a Senior engineer role. In this role you will be responsible for design and development of reliable, cost effective, customized products for Defense avionics applications. Electronics systems design, Obsolescence redesign for Defense / avionics products to meet the customer requirements as well as governing regulatory standards (DO-160, DO-254, MIL-STD, etc.). You also perform trade analysis of design approaches, engineering simulations modeling, derating analysis before finalizing the design. Qualifications: B.Tech in Electronics Communication or Electrical engineering or equivalent with 5 to 8 years of relevant experience. Higher qualifications of Post-graduation and PhD are desirable. Working experience in Defense / Avionics domain is desirable. Technical Skills and Competencies: Must have strong experience in Electronic design and development from requirements to Conceptual design to architectural design to detailed design and analysis Must have strong experience in the hardware design, development and testing of high speed digital electronic circuits including microprocessors, microcontrollers, FPGA and embedded firmware. Must have hands on experience in product design, board level testing, integration and validation testing including development of test plans and Pass/fail criteria. Must have strong knowledge of using Design and simulation tools Must have working experience of product performance evaluation (Hardware Verification) to comply to DO-160 or MIL-STD standards Must have excellent troubleshooting skills on Electrical / Electronic boards to find the root cause and to propose the best solution Should have experience of working with multi-disciplinary team ( Mechanical, PCB layout, Systems engineering and suppliers) Should have an understanding and use of DFMEA, DFT and DFM tools Definition and choice of components (including derating) Definition of electrical schematics and building blocks Boards placeroute (including signal integrity) Manufacturing failures analysis / Root cause analysis Test procedures definition and execution Component obsolescence treatment : alternative solution identification, definition/design of the solution, verification Profile/Skills Digital Electronic Engineering Skills and ability. VHDL coding, Timing analysis Mastering of electronic simulation and design software (Cadence, Allegro, ANSYS, PSPICE/LTSPICE) Knowledge or Defense aeronautics constraints (MIL-STD, DO160, DO254) General understanding of Engineering Development lifecycles including design, development, testing, verification and validation phases

Location: Bangalore, India Thales people architect solutions at the heart of the defence-security continuum. Interoperable and secure information and telecommunications systems for defence, security, and civil operators, are based upon innovative use of radiocommunications, networks, and cybersecurity. We are ground breaking new digital technologies such as 4G mobile communications, cryptography, cloud computing and big data for use in physical protection systems, and critical information systems. Technical Lead - Digital Electronics Engineering Primary Purpose of the Role: Thales India Engineering Competency Center in Bangalore is seeking a Technical Lead engineer Hardware IVVQ role to be part of Hardware engineering team. In this role, you will be responsible for leading Integration of Hardware, firmware & software, perform product functional testing and perform product qualification tests for RADARs, Electronics Warfare systems and other Defense products to meet the customer requirements in term of schedule, cost and quality on your project In this role you will be responsible for design and development of reliable, cost effective, customized products for aerospace applications. Electronics systems design, Obsolescence redesign for avionics products to meet the customer requirements as well as governing regulatory standards (DO-160, DO-254, MIL-STD, etc. ). You also perform trade analysis of design approaches, engineering simulations & modeling, derating analysis before finalizing the design. Experience & Educational Qualification: B. Tech in Electronics & Communication or Electrical engineering or equivalent with 8 to 12 years of relevant experience. Higher qualifications of Post-graduation and PhD are desirable. Working experience in Avionics and Defense systems design is desirable Key Responsibilities and Tasks You also perform and support hardware design and development activities and planning of certification aspects as per MIL-STD and DO-160, DO-254 standards. Skills Required: Essential Must have strong experience in Electronic design and development from requirements to Conceptual design to architectural design to detailed design and analysis Must have strong experience in the hardware design, development and testing of high speed digital electronic circuits including microcontrollers, FPGA and embedded firmware. Must have hands on experience in product design, board level testing, integration and validation testing including development of test plans and Pass/fail criteria. Must have strong knowledge of using Design and simulation tools Must have working experience of product performance evaluation (Hardware Verification) to comply to DO-254 standards Must have excellent troubleshooting skills on Electrical / Electronic boards to find the root cause and to propose the best solution Should have experience of working with multi-disciplinary team ( Mechanical, PCB layout, Systems engineering and suppliers) Should have an understanding and use of DFMEA, DFT and DFM tools Definition and choice of components (including derating) Definition of electrical schematics and building blocks Boards place & route (including signal integrity) Manufacturing failures analysis / Root cause analysis Test procedures definition and execution Component obsolescence treatment : alternative solution identification, definition/design of the solution, verification Must have strong experience in complete Hardware development life cycle (Technical feasibility, requirements, preliminary and detailed design, prototype manufacturing, test and evaluation, qualification and certification) Must have gained experience in piloting a lot of development work, involving in product testing in external labs for EMI/EMC and other environmental testing Must have experience in the IVVQ (Integration, Verification, Validation and Qualification) including requirements management Must have strong experience of integration of Hardware, FPGA firmware, low-level software and application software on Hardware unit. Must have good experience in bench test set-up, functional testing and performance evaluation Must have experience in developing Qualification Test procedures (QTPs), Qualification Test Reports (QTR), Qualification by similarity reports (QBSR) and other documents required by certification authorities Must have strong experience to troubleshoot on electronics and embedded hardware systems to find the root cause and to fix with a suitable solution Must have experience in interfacing with external test facilities for environmental and EMI/EMC and other electrical tests as per MIL-STD and DO-160 standards Must have experience to ensure the reporting progress of the project along with KPI Must have experience to manage risks and opportunities Must be rigorous, organized, autonomous and proactive, and motivated by a position within a multidisciplinary team. Must have demonstrated leadership skills on complex topics. Must have experience of working with multi-disciplinary team (BL engineering team, Lab technicians, external labs, Purchase team, ECC Engineering teams and manufacturing teams, ).

The ideal candidate for this position should possess a BE/BTech degree in Electronics and Instrumentation, Electronics and Communication, or Electrical and Electronics. Additionally, you should have 3 to 5 years of experience in the field. You must have a strong foundation in digital and analog electronics and a proven track record in designing with 8bit/16bit/32 bit Microcontroller and Microprocessor. Your expertise should also extend to selecting electronic components based on design calculations and requirements. Experience in Design calculations, Circuit simulation, Schematic entry, PCB design, Board bring up, and testing is essential. Familiarity with EMI/EMC testing and testing standards is highly preferred. Exposure to power electronics and industrial electronics is a definite plus. Candidates with working experience in mechatronic systems will be given special consideration. Knowledge of the PCB manufacturing process is an added advantage. Proficiency in using debugging tools, Oscilloscope, logic analyzer, etc., is required. An understanding of version control and experience with ALM (application lifecycle management) tools is expected. Familiarity with the product development process will be beneficial.,

analog and digital electronics technical draft power electronics design Design Knowledge with switching regulators topologies.buck, boost and buck-boost, SEPIC design calculations, circuit simulation Serial communication e.g. SPI, I2C, UART, CAN, LIN

Tessolve Semiconductor Pvt. Ltd. is looking for REQ_1797_CPU Engineer_Samsung to join our dynamic team and embark on a rewarding career journey Analyzing customer needs to determine appropriate solutions for complex technical issues Creating technical diagrams, flowcharts, formulas, and other written documentation to support projects Providing guidance to junior engineers on projects within their areas of expertise Conducting research on new technologies and products in order to recommend improvements to current processes Developing designs for new products or systems based on customer specifications Researching existing technologies to determine how they could be applied in new ways to solve problems Reviewing existing products or concepts to ensure compliance with industry standards, regulations, and company policies Preparing proposals for new projects, identifying potential problems, and proposing solutions Estimating costs and scheduling requirements for projects and evaluating results

Beyond Evolution Tech Solutions is a Mobile Apps & IoT solutions Company that is dedicated to developing offerings for end consumers in the IoT Space. We are currently seeking a candidate with experience in the following areas: - Clear fundamentals of Analog and Digital Electronics. - Knowledge of Full Hardware Design Life Cycle. - Ability to perform Circuit Simulation using tools like PSPICE, NI Multisim, etc. - Hands-on experience in HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer, etc. - Proficiency in designing and developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform. - Strong Circuit building and Circuit analysis Skills. - Expertise in Component Data Sheet analysis. - Ability to conduct Project Requirement Analysis. - Familiarity with Protocols such as Ethernet, Wi-Fi, USB, and Serial interfaces (SPI, I2C, RS485, RS422, RS232). - Experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzer, Function/Signal generator, Solder Station (SMD/DIP). - Knowledge about Board Bring Up process. - Proficiency in Testing including Integration testing, protocol/Driver testing, etc. - Proficiency in Embedded C programming, embedded system integration, and test case development. - Knowledge of IOT Open Source Programming / Development. - Responsibilities include research & development of M2M/IOT products and end-to-end embedded system integration. The ideal candidate should possess skills in Hardware Design, PCB Layout, Arduino, Embedded C programming, and Embedded System Integration.,

We are looking for a Senior Electronics Hardware Engineer in our team. In this role, you are expected to have hands-on experience in hardware design and development of digital and analogue electronics, analogue and mixed domain circuits solutions. As a core member of the Electronics system design team, you will drive microprocessors/ microcontrollers, SoC-based processing unit design and peripheral interface control, power electronics for power supply, power distribution, battery charging management, and embedded systems bring-up, integration, and qualification. Core Responsibilities: Design and develop new hardware platforms for multiple projects. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. Ability to make sense of complex functional requirements and build appropriate electronics hardware-based solutions. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills: Must to have: 6 to 8 years of experience in low-power circuit design, system bring-up, engineering-build integration, and debugging performance issues in the integrated product. 4 to 8 years of experience driving design development from component selection, schematic capture, PCB layout, assembly, and integration with other modules of the product. 5+ years of experience in the development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. Experience in embedded Linux-based SOCs design along with microcontrollers. Experience in power supply topologies: DC-DC, Flyback Converters, LDOs, etc. Experience of battery charger design, signal conditioning, sensor interface; protection circuits. Hands-on experience in hardware implementation of embedded system data communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE. Experience of BDC/ BLDC or stepper motors, motor driver circuit design, and its working principles. Diverse experience in microcontroller/ microprocessor-based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. Ability to interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc., on a PCBA level. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have: Strong communication and documentation skills and ability to operate independently. Experience with portable, battery-operated designs and power budgeting. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies. Experience with RTOS. Experience with ESP32 and ESP-IDF. Experience of Microphone and Speaker circuit design is a plus. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. Hands-on experience of the manufacturing process including DFM and DFT for consumer products at scale. Familiar with sensor interface, MIPI Camera CSI and DSI; display Modules and their communication protocols applications; Power Supply design and distribution for low power applications, motor drive control design, Pwm, DMA control, and Audio signal Processing interface. Job Types: Full-time, Permanent, Fresher Benefits: Health insurance, Paid sick time, Paid time off, Provident Fund Schedule: Fixed shift, Monday to Friday Application Question(s): Which project have you worked on that has a microcontroller and sensor instrumentation What was your role and responsibility in that project What exposure do you have in schematics design and PCB development tools Have you participated in Requirement Specification creation and drafting Work Location: In person,

The Embedded Firmware Engineer position at Azista in Ahmedabad is a full-time role within the R&D department. We are seeking an energetic and enthusiastic individual for immediate hire. The successful candidate will play a key role in designing, developing, and debugging embedded firmware. It is essential to have a good understanding of microcontroller-based hardware schematic diagrams and the ability to develop firmware using the C language. Collaboration with cross-functional teams is a crucial aspect of this role in order to define and implement firmware requirements effectively. The responsibilities also include preparing firmware design documents, creating firmware test cases, and ensuring the update and maintenance of firmware versions. Key requirements for this position include experience in embedded firmware design using C, proficiency in analog and digital electronics, and familiarity with tools such as IAR Workbench. Strong programming skills in the Embedded Domain, knowledge of basic electronics, and understanding of various protocols like UART, SPI, I2C, Ethernet, RS232/RS485, and USB are highly desirable. Additionally, knowledge of GPS, GSM-GPRS modules, ADC, DAC, MSP430, AVR microcontrollers, and the use of tools like a multimeter and oscilloscope are advantageous. The ideal candidate should possess strong problem-solving skills and have 2-5 years of experience in embedded firmware development. Candidates with a BE/B.Tech/ME/M.Tech degree in Electronics and a keen interest in a long-term career opportunity are encouraged to apply for this challenging and rewarding role.,

Division Department Employment Type Job Purpose To initiate and implement ESSA (Eliminate, Standardize, Simplify and Automate) in existing assets and new projects in core specialization of Electrical Engineering discipline, Accountabilities Standards & Procedures Design III Automation & Obsolescence Audits & Compliance Capability development Education Qualification Electrical Engineering from reputed University, Relevant Work Experience At least 8 -15 year of experience in Engineering roles preferably in Pharma Industry, Minimum 5 years of experience in performing Central Engineering roles preferably in Pharma Industry, Ability to implement new techniques, deep understanding of manufacturing process, planning and organizational skills, prioritization multi-tasking, understanding of financial concepts like CAPEX, OPEX etc, knowledge of automation Competencies/Skills Job Location Patalganga Shift Hours Diversity Requirement

At Cadence, we are seeking a Software Engineer II to join our team in Ahmedabad. We are a company that values innovation and leadership in the technology industry. If you have 2+ years of domain experience and proficiency in functional verification using SV/UVM with strong debugging skills, then this role might be a great fit for you. In addition, having a solid foundation in Digital Electronics and Programming, along with hands-on knowledge of C/C++/Scripting is essential. Experience with MIPI is a plus, as well as prior VIP usage and development experience. Cadence is a renowned leader in electronic design with over 30 years of expertise in computational software. Our Intelligent System Design approach enables us to provide software, hardware, and IP solutions that bring design concepts to life. Our customers are some of the most innovative companies in the world, spanning various industries such as consumer electronics, hyperscale computing, 5G communications, automotive, aerospace, industrial, and health sectors. As a Software Engineer II at Cadence, you will be responsible for designing and developing VIP using C/C++. You will also manage multiple VIPs, lead a small team, and engage with customers. The ideal candidate will have a BE/BTech/ME/MS/MTech degree in Electrical/Electronic or equivalent field and possess strong analytical and communication skills. Furthermore, you should be self-motivated, with a passion for learning and exploring new technologies. In this role, you will have the opportunity to work with a diverse team of talented individuals who are dedicated to customer success and fostering innovation. Cadence offers a supportive work environment that encourages creativity and collaboration. Our employee-friendly policies prioritize the well-being and career development of our employees, providing opportunities for growth and recognizing individual successes. If you are someone who thrives in a dynamic and fast-paced environment, enjoys pushing boundaries to find creative solutions, and values integrity in all aspects of your work, then we would love to hear from you. Join us at Cadence, where we are committed to making a difference through impactful technology solutions. Contact: kmadhup@cadence.com Name: K Madhu Prasad Cadence - Solve what others can't. Join us in doing work that matters.,

Circuit Design & Development Design analog and digital circuits for embedded systems, including microcontroller-based applications Select components based on performance, cost, and availability Create schematics and PCB layouts using tools like Altium, Eagle, or KiCAD Embedded Firmware Development Develop and debug firmware in C/C++ for microcontrollers (ARM Cortex, STM32, PIC, etc.) Integrate peripherals such as UART, SPI, I2C, ADC, PWM, and GPIO Optimize code for performance, power efficiency, and memory usage System Integration & Testing Conduct functional testing, validation, and debugging of hardware prototypes Collaborate with software and mechanical teams to ensure seamless integration Use oscilloscopes, logic analyzers, and other lab tools for diagnostics Documentation & Compliance Prepare design documentation, BOMs, test reports, and revision histories Ensure designs comply with relevant standards (EMI/EMC, RoHS, CE, etc.) Support certification processes and regulatory submissions Product Lifecycle Support Assist in DFM (Design for Manufacturing) and DFT (Design for Testability) Support production teams during pilot runs and mass manufacturing Troubleshoot field issues and propose design improvements Project Collaboration & Communication Work closely with cross-functional teams including procurement, QA, and vendors Participate in design reviews and provide technical feedback Maintain clear communication with stakeholders on timelines and risks Preferred Skills & Tools C/C++, RTOS (FreeRTOS), Assembly STM32, NXP, Microchip, TI UART, SPI, I2C, CAN, USB Oscilloscope, Multimeter, JTAG, Logic Analyzer Git, SVN MS Office, LaTeX, Confluence

Role: Design Analysis Engineer (FPGA/Vivado) [M.Tech Mandatory] What they do: Analyze design issues in Vivado implementation flow. Apply and debug timing constraints to ensure design closure. Propose/design corrections to fix issues. Use scripting (Shell/Python/TCL) to automate and improve analysis. (RTL/Verilog knowledge is optional, not mandatory.) Mandatory Skills: Strong in Timing Constraints (STA concepts) Hands-on with Vivado tool flow Shell/Python/TCL scripting for automation Good to have: Quartus exposure Basic RTL/Verilog understanding In short: This is not an RTL coding role. Its a timing + Vivado design analysis role with scripting. Feel free to share the resume if you feel its a good fit svishnuraj@teksystems.com

Responsible for procurement of electrical/electronic components. New vendor development, market research of new vendors and contacting and explaining the requirement clearly and completely. Purchase proposal or Service proposal preparation for approval from the Top level Management. Post proposal approval, PO processing with all terms and conditions as per the negotiation. Upon submission of invoice to the payments team, proper follow-up for the payments at the correct mentioned time without fail. Record all transactions and periodically conduct internal stock audits to ensure the physical and virtual stock levels PO creation, correction, routing correct products to the particular PO, routing respective PO to the vendor Ensure proper dispatch of the final components. Skills Required: 3+ years of experience in procurement roles. Strong organizational skills with a keen eye for detail. Excellent communication, interpersonal skills and stakeholder management. Proficiency in managing vendor relationships and handling complex invoicing processes. Ability to handle multiple tasks and prioritize effectively in a fast-paced environment.

Hiring Freshers Kickstart Your Career in VLSI At PRSsemicon Technologies and Spec2chips semiconductor a PRSgroup of companies, we are shaping the future of semiconductor innovation by building a Global Capability Development Centre. We are looking for fresh graduates passionate about VLSI domains to join our team. Through structured training and hands-on experience, we ensure you gain the technical expertise and industry-relevant skills required to succeed in this dynamic field. Your Journey with Us: Comprehensive Training Gain in-depth knowledge of VLSI design, verification, emulation, DFT, physical design, and analog design based on project needs. Hands-on Experience Work with industry-standard tools and methodologies. Expert Guidance Learn from seasoned professionals and build practical expertise. Live Project Transition Successfully complete training and contribute to real-world chip design projects. What We Look For: Strong fundamentals in Digital Electronics. Eagerness to learn and build competency before taking on project responsibilities. Passion for VLSI design and a commitment to a long-term career in semiconductors. Why Join PRSsemicon? Be part of Indias thriving semiconductor industry. Learn from experienced professionals in a structured training environment. Get hands-on exposure to cutting-edge chip design projects. Headquarter: Chennai Mode: Offline/Online/Hybrid (as per project requirements) Eligibility: B. Tech/M. Tech in ECE, EEE, E & I, VLSI, or related fields Apply Now & Shape the Future of VLSI with Us!