1205 Dfmea Jobs - Page 6

Responsibilities & Key Deliverables Tracking of daily despatches ( Tractors ). Understand ing the Logistics Processes in detail and carry out improvements as expected from time to time. Collaborative working with MLL for ensuring / Streamlining Logistics Processes. Drive efficiencies in terms of Quality, Cost and delivery parameters. Act as analyst : prepare MIS, conduct analysis and take projects for Logistics improvements. Project management for Cost saving projects and transit damage reduction projects. Day to day operations issue resolution with MLL / Transporters. Validation of freight proposals. Study the Custody Transfer and Stockyard RPH reports for driving substantial reduction in the Outbound Transportation defects. Responsible for Planning and execution of New Transmission Assembly and Testing Facility.Planning of Process, Layout and Logistics.Ensuring zero defect, on-time delivery, Troubleshooting and improvements - First time right.Process automation concept development and implementation.Plant layout and Process layout design with industrial standards.APQP and PPAP documents (PFC,PFMEA,CP,DFMEA,MFMEA,DAP) - preparation / Updation.Ensure BOM validation with Process Team, PDRDS team and on-time ER implementation.Regular interaction with stakeholders for smooth implementation and hand over.Regular interaction with suppliers to ensure on time receipt of equipment.Preparation of RFQ, scope of supply, technical finalisation including occupational safety new assy line.Ensure trial parts availability for acceptance and prove-out trials.Ensure all the safety during installation of equipment.Ensuring smooth Productionizing of new product and applicable quality standards as per plan.Ensure active participation of employees in QC stories, OIT, CIT, Kaizens etc and Cost innovations.Ensure 100% handing over of documents / drawings to plant engg team.Handing over of all consumables with Mahindra part no and with updated drawings / specifications Preferred Industries Automobile Manufacturing Logistics Education Qualification Diploma; Graduate; Bachelors of Technology; Diploma in Mechanical; Bachelors of Technology in Mechanical General Experience 3-5 Years Critical Experience System Generated Core Skills Facility Planning Vehicle Tracking Logistics Management Logistics Systems Quality Control MIS Reporting Project Management Cost Optimization Issue Management Product Knowledge- Transmission Process Knowledge - Assembly Testing Logistics Planning Process Layout Troubleshooting Six Sigma Process Automation Concept Development Layout Planning Layout Design Production Part Approval Process (PPAP) Process Failure Mode Effects Analysis (PFMEA) Design Failure Mode and Effects Analysis (DFMEA) Machinery Failure Mode and Effects Analysis (MFMEA) Bill of Materials (BOM) Stakeholder Management Equipment Management Request For Quotation (RFQ) Scope Planning RFQ Occupational Health & Safety (OHS) Safety Management Production Management Quality Management System (QMS) Continuous Improvement Engineering Drawings Team Management System Generated Secondary Skills Job Segment: Engineer, Production Manager, Engineering, Manufacturing

Role & responsibilities Evaluate drawing requirements & able to create manufacturing process flow New product development & sample submission Preparation of documents like PPAP, PFMEA,control plan, SOP Participate in cross-departmental meetings to ensure collaboration Establish effective and efficient work sequences Solve existing manufacturing problems Develop standardized criteria for all manufacturing process Preferred candidate profile Expert level with CNC Machining and Grinding. Experience in forging & Heat treatment added advantage. Experience with Problem solving like DOE & Six Sigma. Strong verbal and written communication skills New product development Knowledge in AutoCAD

Job Description ​ Responsibilities: Battery Pack Design & Component Packaging: Responsible for the end-to-end electrical design of battery packs, including wiring layout and optimal packaging of key components such as PDU, BMU, BCU, relays, fuses, and HV/LV contactors. Component Selection & Sizing: Evaluate, select, and size critical electrical components such as ESC, Motors, BMS, contactors, IMDs, connectors, IVT modules, and busbars , ensuring suitability for performance, safety, and integration. Project Coordination & Technical Interface : Collaborate with cross-functional teams and provide timely technical support to meet project milestones. Design Documentation & Risk Assessment : Prepare and maintain key engineering documents, including DFMEA, FTA, DFM, and DVP in accordance with product requirements and safety standards. Technical Review & Risk Management: Participate in design reviews, risk assessments, and cross-functional brainstorming to identify potential issues early and ensure product quality and compliance with technical specifications. Production Support: Support battery pack assembly on the production floor, trouble​shoot issues in real-time, and provide immediate, effective solutions to minimize downtime. Cost Management : Operate within defined budgets by identifying and implementing cost-effective solutions without compromising on performance or quality. Continuous Improvement: Drive value engineering initiatives and identify opportunities for enhancing existing products through design optimization and best practice development. Testing and Validation: Develop test plans, oversee testing processes, and collaborate with the testing team to validate electrical systems performance and safety. Analyse test results and drive improvements based on findings. Research and Innovation: Stay updated with industry trends, emerging technologies, and best practices related to drone electrical systems. Implement innovative solutions to enhance drone performance and capabilities. Additional Responsibilities: CAD Modelling & Drawing Preparation: Should have basic knowledge in 3D & 2D CAD Creo Parametric and Creo Schematics (Preferred). Ensure timely delivery of detailed and production-ready drawings. Project Life Cycle Management (Windchill): (Preferred) Qualifications: Bachelor’s degree / Master’s degree in Electrical Engineering, Electronics Engineering, Mechatronics, or a related field. Advanced certifications or specialized training in WHMA/IPC standards are a plus. 03+ years of hands-on experience in battery pack design , high-voltage system integration , or drone/e-mobility electrical systems . Prior exposure to Cell selection, sensor selection, Motor selection, ESC selection, BMS algorithms (SOC, SOH estimation, balancing, paralleling) is strongly desired In-depth knowledge of Indian and international standards applicable to drones, aerospace, and automotive domains, especially AIS , MIL , IEC , and ISO standards. Perform Electrical components testing at both component and system levels using appropriate test equipment and tools. Experience in battery testing (cell, module, and pack level), using simulation tools and test equipment. Ensure designs comply with EMC/EMI requirements at both component and system/vehicle levels. Ability to work independently and cross-functionally under tight project timelines. Strong problem-solving and analytical thinking at both component and vehicle levels. Excellent communication skills for cross-team collaboration and supplier interfacing. ​ Locations : Novel MSR Building, Subbaiah Reddy Colony, Marathahalli Village, Marathahalli, Bengaluru, Karnataka 560037 Road No7, Hi-Tech Defense Aerospace Park, Plot No 28, Hardware Park, KIADB Industrial Area, Mahadeva Kodigehalli, Manchappanahosahalli, Bengaluru, Karnataka 562149

Key Responsibilities: Lead the design and development of pharma capital equipment machines and tooling systems. Prepare and review 3D models, assembly drawings, and part detailing using SolidWorks, AutoCAD, or similar CAD software. Manage design projects from concept to execution in line with pharma compliance and GMP standards. Collaborate with production, quality, and procurement teams for design implementation. Conduct design validation, DFMEA, and tolerance analysis . Guide junior design engineers and ensure adherence to project timelines and quality standards. Requirements: Bachelor’s in Mechanical Engineering. 5–8 years of experience in design of pharma machinery , preferably tablet press machines. Strong command of CAD tools (SolidWorks/AutoCAD). Knowledge of GMP/cGMP norms, pharma regulatory standards , and machine safety guidelines. Strong leadership, problem-solving, and project management skills.

SAP HANA Specialist Candidate should be Basis senior consultant having at least 5+ years of experience in handling SAP S/4HANA, SAP ECC, SRM, SAP BW, SAP PO components in AIX / Linux & Windows. Should have experience in handling at least 1 implementation, migration and/or Upgrade project along with post implementation projects. Should have experience in handling atleast 1 end to end ECC to S4 HANA conversion Should have sound technical knowledge of R/3 Basis and Netweaver ABAP Stack, Java stack / BOBJ. HANA Installation and Administration experience along with optimizing and performance tuning techniques. HANA, SYBASE, ORACLE database installation and/or upgrades. SAP Solution Manager experience with CHARM Experience in SaaS products. Knowledge on On-Premise and SaaS Integrations. Knowledge on Cloud - Azure, AWS Exposure to Backup/Restore/Recovery of SAP/DB- HANA, SYBASE and ORACLE databases. Assistance provided strategizing backup/recovery and DR. Experience working/leading teams, good problem solving & communication skills. SAP Basis administration Supports Performance monitoring & tuning, Problem analysis & resolution, andother activities required to maintain system integrity. Administer the SAP database (plan and perform database upgrades, apply database maintenance, design and maintain physical database layout, perform database reorganizations, design and implement backup and restore strategy, maintain database security, administer database performance, manage database storage, database problem determination and resolution, etc.). Develop and maintain system documentation for all SAP instances and interfaces. Enterprise Portal Administration/ Trex Administration/ Content Server Administration and Archival Candidate should be flexible to travel onsite (within India or outside) and must have good communication and analytical skills. Must be able work on 24/7 shifts

Required Skills: Need PCBA Assembly knowledge Basic knowledge in project management RFQ knowledge SMT/ Wave/ Backend process Knowledge QMS Bacics Preferred candidate profile

Candidate should be Basis senior consultant having at least 5+ years of experience in handling SAP S/4HANA, SAP ECC, SRM, SAP BW, SAP PO components in AIX / Linux & Windows. Should have experience in handling at least 1 implementation, migration and/or Upgrade project along with post implementation projects. Should have experience in handling atleast 1 end to end ECC to S4 HANA conversion Should have sound technical knowledge of R/3 Basis and Netweaver ABAP Stack, Java stack / BOBJ. HANA Installation and Administration experience along with optimizing and performance tuning techniques. HANA, SYBASE, ORACLE database installation and/or upgrades. SAP Solution Manager experience with CHARM Experience in SaaS products. Knowledge on On-Premise and SaaS Integrations. Knowledge on Cloud - Azure, AWS Exposure to Backup/Restore/Recovery of SAP/DB- HANA, SYBASE and ORACLE databases. Assistance provided strategizing backup/recovery and DR. Experience working/leading teams, good problem solving & communication skills. SAP Basis administration Supports Performance monitoring & tuning, Problem analysis & resolution, and other activities required to maintain system integrity. Administer the SAP database (plan and perform database upgrades, apply database maintenance, design and maintain physical database layout, perform database reorganizations, design and implement backup and restore strategy, maintain database security, administer database performance, manage database storage, database problem determination and resolution, etc.). Develop and maintain system documentation for all SAP instances and interfaces. Enterprise Portal Administration/ Trex Administration/ Content Server Administration and Archival Candidate should be flexible to travel onsite (within India or outside) and must have good communication and analytical skills. Must be able work on 24/7 shifts

ROLE OBJECTIVE Development Engineer II is part of Product development team to support individual products or specific technical elements for medium-sized projects. This position supports in development of Low voltage Connectors. RESPONSIBILITIES Use best practices and knowledge of internal or external business issues to support a multiple products, services or processes. Providing technical expertise on current production systems; designing advanced solutions to continuously improve performance. Working with designers to optimize manufacturing processes and technology while preserving product design functionality. Eliminating inefficiencies and incorporating best practices to continually improve overall product performance. Evaluating the quality of manufactured products-First article Inspection report Carry out/execute design change requests (Engg Change management). Coordinating & resolving technical issues and Root Cause Analyses Execute VAVE / cost out assignments EDUCATION & CRITICAL EXPERIENCE B.E / B. Tech : Generally, 4+ years of experience in supporting Development / Product Engineering activities. ME/MTech - Generally, 2+ years of experience in supporting Development / Product Engineering activities. Mandatory: Working knowledge of CAD systems (CREO Part modeling & Sheet Metal) Reading and interpreting engineering drawings/product prints Interpretation of simulation results & translating into product design Working knowledge in Design for Manufacturability (DFM-Molding / Stamping / Plating)& DFMEA Working knowledge in Tolerance stack-up and GD&T Good Conceptual, problem solving and Analytical Skills Working knowledge of product design (Processes, Approaches, Tools and Techniques) & Validation Working knowledge in prototyping methods Working knowledge of product life cycle, ability to perform design activity & produce deliverables. Experience in product/ material testing Knowledge of quality tools ( 8D, Why Why analysis, Fish bone….) Working knowledge of designing with Plastics & Sheet Metal components Experience in conducting Root Cause Analysis (RCA), demonstrated extensive experience in Methodical / structured approach to execute the plan. Good Knowledge on Cycle time reduction & Process Improvement Basic knowledge about, Scoop proofing, Stubbing will be an added advantage Preferred: Ability to train others on Product design / Engineering Tools Strong knowledge on Plastics & Sheet Metal components Ability to understand specification for validation as per US CAR / LV 214 / Similar Specification Knowledge about the crimping technologies. Excellent Communication and Presentation skills Basic Knowledge of GPS & MBD is an added advantage Should Collaborate effectively across multi-cultural groups Experience in VAVE Projects Execution Basic knowledge on measurement instruments / methods / validations MOTIVATIONAL/CULTURAL FIT Innovation demeanour, Problem solving Passion for technology Talent development Results driven Clear and concise communication

JOB PURPOSE - Design the products - Dampers, Shock Absorbers, Seating system assemblies. - Support the other departments in design related technical matters. - Administration of Design and Prototype team. - Support manufacturing team in stabilizing the product in mass production. MAIN RESPONSIBILITIES Study of customer inputs, conduct product design feasibility. Work with design engineers on necessary design calculations, past data analysis, work with suppliers and manufacturing team for deciding on design concept. Conduct benchmarking Check and release 3D and 2D prepared by design engineers - costing, prototyping, development and production stages. Conduct design reviews at appropriate stages, DFMEA, DFA, DFM, Study and define product validation - DVP. Working out VAVE. Running and tracking Engineering Change as per defined process. Administer the prototype team for day-to-day work, short term and long term activities, manpower and other resources. Technical documentation for TS system, IMDS, Duroshox manual and other relevant - get those from engineers and cross check for accuracy. Administration of the design team. Periodic preparation of performance data for management reports. REQUIRED COMPETENCIES Good knowledge of components, sub-assemblies and assemblies. Good at basics of mechanical engineering. Should have knowledge about basic manufacturing processes. Good at product design, mechanical engineering calculations, DVP, DFMEA, DFA, DFM. Good and liner tolerancing and GD&T. Good at 3D software including 2D drafting. Good administrative skills, handling situations with peers. KRA Deliver the target of revenue from new products. Delivery first time right and on-time : Design output and Prototypes. No engineering changes due to design at production trial run stage. Design verification output (results of prototype) to confirm product requirement - first time right. EDUCATION & EXPERIENCE B.E. (Mech / Automobiles), 08 to 15 years relevant experience.

Job Title Technical Project Manager Job Description The Innovation Project Manager is responsible for executing multi-disciplinary projects, ensuring alignment with timelines, budgets, and resource constraints, potentially overseeing projects, resolving issues creatively and selecting appropriate methods for solutions, fostering effective team collaboration, delegating tasks, leveraging strengths, and ensuring clear communication, working under limited supervision. The role demonstrates customer centricity by understanding customer needs, incorporating feedback, and ensuring solutions meet requirements, builds strong relationships with stakeholders, managing expectations and ensuring alignment on objectives. The role delivers business impact through innovative solutions supporting organizational goals, while continuous improvement is ensured by seeking skill enhancement opportunities, and sharing knowledge. Job Responsibilities: Leading the execution of large-scale projects that drive global sourcing strategies to deliver the strategic business initiatives. This includes supplier management, E2E product launch management, lifecycle management among other critical sustaining engineering activities. Support the business case development for MLD projects Developing project scope, assessing technical & project risk, establish technical requirements for the project. Ensuring the achievement of ALL MLD targets for the project(s) at milestones (supplier support, cost, on time delivery of materials, quality, qualification of parts, processes and equipment) Preparation of WBS, RACI & effort estimation for project. Guiding and mentoring designers & engineers on technical review, DFMEA, DFA/DFM. Ensures that products meet external and internal customer quality needs, cost targets, assurance of supply, address component obsolescence and service needs Gains agreement on achieving Business case, project objectives, balancing schedule, cost, quality and requirements Manages the scope and requirements Takes full responsibility to achieve critical KPIs for quality and productivity targets that are tied to the annual business plans. Holds reviews with internal and external stakeholders, including business groups, to review plans, strategy and actual metrics for the products. Manages the business case and is a business partner focused on maximization of the added value for the business and savings potential Manages projects ensuring execution is in line with project guidelines and directives Determines project risks, defines corrective action and drives the projects to closure Determines, allocates, and directs all project resources in accordance with guidelines Keeps abreast of developments in project management tools and processes (both internal and external) Ensures compliance to corporate and regulatory agencies policies/rules/procedures X- functional alignment of Phase in / Phase out planning Manage E2E project execution as assigned by the functional manager You're the right fit if: Bachelor’s/Master’s degree in Mechanical/Electrical/Electronics Engineering or equivalent 12+ years’ experience in a high-tech industry with a focus on mechanical or electrical/electronics engineering design Successful track record of project management and the ability to lead teams and influence cross-functional stakeholders, preferred Familiarity with PM tools like MS Project, Smartsheets, Power BI Should be hands-on with Engineering Change Management, Design Transfer processes. Great work ethics with a passion for quality, Lean and business efficiency Great interpersonal and communication skills Experience in design/development of electrical/electronic modules like battery. power supplies, displays/PCBAs would be an added advantage Experience in EMI/EMC and Compliance testing are added advantage. Experience in VAVE projects are good to have PMP Certification, MBA and experience in a regulated medical device development and manufacturing environment a plus How We Work Together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the company’s facilities. Field roles are most effectively done outside of the company’s main facilities, generally at the customers’ or suppliers’ locations. Indicate if this role is an office/field/onsite role. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Learn more about our business. Discover our rich and exciting history. Learn more about our purpose. If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our culture of impact with care here.

Skill Sets & Competencies : New Product design & development Engineering Change Management PDM, CAD & knowledge on Analysis softwares DFMEA hands on. Hands on with design for Manufacturing in injection molds, press tools & different manufacturing process Good analytical skills Good communication & presentation skills Good Learning skills Good understanding of reading Drawings. Project Management Hands on Plastics and Sheetmetals. Better than average written and spoken communicaiton skills

Skills: Experience in 3D modelling Experience in 2D drafting Drawing Reading capability 2D to 3D and 3D to 2D conversion Pro/ E, NX, OSDM, Software knowledge and SAP basic knowledge would be added advantage Basic knowledge on New Product Development Basic knowledge on Product Design Hands on ECR and ECN a must Team performer Exposure to Global teams Good Communication skills. (Written and Spoken) Good Logical thinking capabilities Good Problem solving capabilities Knowledge on DFMEA and hands on will be an added advantage Good knowledge on GD&T. Hands on with Plastics and Sheet metals.

Hosur Plant, Tamil Nadu, India Department R&D - EV Sys D&D - BMS & Chargers Job posted on Jul 25, 2025 Employment type White Collar About TVS Motor TVS Motor Company is a reputed two and three-wheeler manufacturer globally, championing progress through Sustainable Mobility with four state-of-the-art manufacturing facilities in Hosur, Mysuru and Nalagarh in India and Karawang in Indonesia. Rooted in our 100-year legacy of Trust, Value, and Passion for Customers and Exactness, we take pride in making internationally aspirational products of the highest quality through innovative and sustainable processes. We are the only two-wheeler company to have received the prestigious Deming Prize. Our products lead in their respective categories in the J.D. Power IQS and APEAL surveys. We have been ranked No. 1 Company in the J.D. Power Customer Service Satisfaction Survey for consecutive four years. Our group company Norton Motorcycles, based in the United Kingdom, is one of the most emotive motorcycle brands in the world. Our subsidiaries in the personal e-mobility space, Swiss E-Mobility Group (SEMG) and EGO Movement have a leading position in the e-bike market in Switzerland. TVS Motor Company endeavors to deliver the most superior customer experience across 80 countries in which we operate. For more information, please visit www.tvsmotor.com. About the role Educational Qualification: B.E/B.Tech , M.E/M.Tech Roles & Responsibilities: AC-DC, DC-DC design , including design sheet calculation, component selection. Schematic and layout design meeting EMC requirements. Design prototyping, testing and validation. Design simulation and verification. To conduct DFMEA, HARA,FTA and doumentation meeting ISO26262 functional safety. Study of latest converter topology for compact design and wireless charging technology. Common mode differential mode filter,shielding design for meeting conducted and radiated standard requiremnets Functional Competencies: Knoweledge in Power, analog and digital electronics Knowledge in power electronics including AC-DC DC-DC high frequency medium power converter design. Magnetic design knoweledge including planar and integrated magnetics Hand on experience in hardware testing and validation . Simulation tool- MATLAB-SIMULINK , LTSpice , PLECS Control system knowledge including modelling and closed loop design EMC based product design knowledge Hands on experience in PCB design(schematic and layout ) - Tool- ORCAD, ALTIUM Behavioral Competencies: Business Acumen,relentless reflection,Perseverance Toughness, Emotional intelligence Executive presence Strong Communication skill Leadership Competencies Leading Innovation & Diverse Teams Adaptability Strategic Thinking Why TVSM? At TVSM, we are always challenging ourselves to build a better, connected & sustainable future. We need the most innovative and diverse Digital Minds to develop tomorrow ‘s reality. We offer great benefits and rewards, as you'd expect from a world leader in automotive Industry. We are a merit driven, equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, sex, gender, gender expression, sexual orientation, age, marital status, or disability status.

As an Optical Bonding Engineer (Mechanical) in Coimbatore, you will be a valuable addition to our team if you are passionate about product design, precision engineering, and display innovation. You will be responsible for leading product design and development activities, implementing GD&T, DFMEA, and DFR principles, driving design reviews with suppliers, and developing optical bonding for display modules. Troubleshooting LCD/TFT backlight and illumination issues will also be a key part of your role. You should possess a BE/B.Tech or ME/M.Tech degree in Mechanical/Instrumentation/Mechatronics with 5-10 years of experience in mechanical/product design. Hands-on experience with DFM, DOE, GD&T, DFMEA, DFR, expertise in optical component & backlight module design (TFT/LCD), proficiency in tolerance stack-up analysis, and structural/thermal analysis are essential requirements. A strong background in NPD, QMS, APQP, and PPAP processes, along with excellent communication and problem-solving skills, will be beneficial for this role. This is a full-time job with a competitive salary aligned with market standards. The benefits include health insurance and Provident Fund. The work schedule is during the day, and the work location is in person in Coimbatore. If you believe you meet the qualifications for this position or know someone who does, please reach out to hemarathna.r@elevateindia.co or call 9840474643. The application deadline is 08/07/2025, and the expected start date is 01/08/2025.,

You will be a crucial member of our engineering team as a Product Design Engineer, utilizing your expertise in Pro/ENGINEER (Creo) to develop innovative product designs. Your primary responsibility will be to create designs that are not only functional but also cost-effective and manufacturable, from initial concept to final production. Your key responsibilities will include designing and developing 3D models and 2D drawings using Pro/ENGINEER (Creo), ensuring that the product designs meet customer requirements and industry standards. You will work closely with various teams such as R&D, manufacturing, quality, and marketing to collaborate on design projects. Additionally, you will conduct tolerance analysis, DFMEA, and DFM/DFA studies to guarantee a robust design and develop prototypes for validation through simulations or testing. In this role, you will also be responsible for preparing detailed documentation including BOMs, design specifications, and assembly instructions. Continuous improvement of designs based on feedback and performance data will be a key aspect of your responsibilities. To excel in this position, you should hold a Bachelor's degree or Diploma in Mechanical Engineering or Industrial Design, along with 3-5 years of experience in product design using Pro/ENGINEER (Creo). Proficiency in engineering principles, materials, and manufacturing processes is essential. Strong problem-solving skills, attention to detail, and excellent communication and teamwork abilities are also required for success in this role. This full-time position is based in Kurumbapalayam, Coimbatore. If you meet the qualifications and are excited about this opportunity, please share your resume with us at info@sriaadhava.in/78451 22082.,

JOB DESCRIPTION Bring More To Life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Beckman Coulter Diagnostics, one of Danahers 15 operating companies, our work saves livesand were all united by a shared commitment to innovate for tangible impact. Youll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danahers system of continuous improvement, you help turn ideas into impact innovating at the speed of life. As a global leader in clinical diagnostics, Beckman Coulter Diagnostics has challenged convention to elevate the diagnostic laboratorys role in improving patient health for more than 90 years. Our diagnostic solutions are used in routine and complex clinical testing, and are used in hospitals, reference and research laboratories, and physician offices around the world. Every hour around the world, more than one million tests are run on Beckman Coulter Diagnostics systems, impacting 1.2 billion patients and more than three million clinicians per year. From uncovering the next clinical breakthrough, to rapid and reliable sample analysis, to more rigorous decision makingwe are enabling clinicians to deliver the best possible care to their patients with improved efficiency, clinical confidence, adaptive collaboration, and accelerated intelligence. Learn about the Danaher Business System which makes everything possible. The Lead Mechanical Engineer is responsible for designing, developing, troubleshooting Beckman Coulter Diagnostics modules and applying life cycle management principles and upholding established design practices and quality processes throughout development. This position reports to the Head of Life Cycle Management & Group Manager and is part of the R&D Hardware/Systems Development team located in Bengaluru BDC and will be an on-site role. In This Role, You Will Have The Opportunity To Lead and manage sustaining engineering activities for existing electro-mechanical products, including root cause analysis, corrective actions, and continuous improvement initiatives. Drive innovation by designing and developing mechanical solutions to enhance performance, safety, reliability, and cost-effectiveness. Own and maintain the prototyping infrastructure with adherence to 5S standards. Oversee prototype development internally or through suppliers, and executing testing, verification, and validation. Ensure thorough documentation including CAD models, drawings, specifications, and test plans. Collaborate with global cross functional teams to resolve manufacturing and field issues. Provide technical support to stakeholders, mentor junior engineers, and manage multiple projects with minimal guidance. Adapt quickly to changes in project direction and ensure successful project execution through feasibility studies, risk assessments, and design reviews. The essential requirements of the job include: Bachelors degree in mechanical engineering or a related field with 7-10 years of experience. Strong knowledge of mechanical design principles, materials, manufacturing processes, Rapid Prototyping and Proficiency in SolidWorks CAD software and simulation tools. Strong knowledge on lean principles, 5S, Kaizen and Proto build workshop management. Hands-on experience in building mechanical parts and assemblies using tools and machines. Skilled in teardown analysis, reverse engineering, and selection of off-the-shelf Electro-mechanical components. Thorough knowledge of vendor and supplier management for prototype builds, including managing quality and delivery timelines. Familiar with import/export processes documentation between India and other countries. Knowledge of should-costing, estimation, and dFMEA/pFMEA, DFX, Tolerance Stack-up Analysis and GD&T. Create and maintain detailed engineering documentation, including CAD models, drawings, specifications, test plans. Experience with medical device regulations (FDA, ISO 13485, ISO 14971, IEC 60601) and Ensure compliance with industry standards, regulations, and company policies. It would be a plus if you also possess previous experience in: Medical device design & development or IVD instrumentation, such as clinical chemistry, immunoassay, hematology, urinalysis, molecular microbiology or flow cytometry systems is a plus Electro-Mechanical products, Robotics and Automation Join our winning team today. Together, well accelerate the real-life impact of tomorrows science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit www.danaher.com. At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Job Description Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Beckman Coulter Diagnostics, one of Danahers 15 operating companies, our work saves livesand were all united by a shared commitment to innovate for tangible impact. Youll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danahers system of continuous improvement, you help turn ideas into impact innovating at the speed of life. As a global leader in clinical diagnostics, Beckman Coulter Diagnostics has challenged convention to elevate the diagnostic laboratorys role in improving patient health for more than 90 years. Our diagnostic solutions are used in routine and complex clinical testing, and are used in hospitals, reference and research laboratories, and physician offices around the world. Every hour around the world, more than one million tests are run on Beckman Coulter Diagnostics systems, impacting 1.2 billion patients and more than three million clinicians per year. From uncovering the next clinical breakthrough, to rapid and reliable sample analysis, to more rigorous decision makingwe are enabling clinicians to deliver the best possible care to their patients with improved efficiency, clinical confidence, adaptive collaboration, and accelerated intelligence. Learn about the Danaher Business System which makes everything possible. The Mechanical Engineer is responsible for the design and re-design of certain Hardware components and the development of new products, on-market products and support manufacturing activities. This position reports to the Head of Life Cycle Management & Group Manager and is part of the R&D Hardware/Systems Development team located in Bengaluru BDC and will be an on-site role. In This Role, You Will Have The Opportunity To Design and develop innovative mechanical solutions to improve performance, safety, reliability, throughput and cost-effectiveness (Knowledge of Should costing and estimation), in Design Change Project. Act as a change lead, managing the entire Design change process independently. Handle multiple projects with proper project planning and minimal guidance. Conduct root cause analysis and implement corrective actions. Collaborate with cross function teams to resolve manufacturing and field issue, conduct feasibility studies, risk assessments, and design reviews and validate designs through analysis and testing. The essential requirements of the job include: Bachelors degree in mechanical engineering or a related field with 5 years of experience in mechanical design principles, materials, manufacturing processes. Proficiency in SolidWorks CAD software and simulation tools. Create and maintain detailed engineering documentation, including CAD models, drawings, specifications and test plans. Knowledge of dFMEA/pFMEA, DFX, Tolerance Stack-up Analysis and GD&T. Basic knowledge of metals and materials, its application knowledge on mechanical parts fabrication, Rapid prototyping and testing. It would be a plus if you also possess previous experience in: Experience with medical device regulations (FDA, ISO 13485, ISO 14971, IEC 60601). Experience in IVD instrumentation, such as clinical chemistry, immunoassay, hematology, urinalysis, molecular, microbiology or flow cytometry systems is a plus. Advanced certification in CAD tools. Familiarity with lean manufacturing and Six Sigma principles. Prior work experience in Electro-Mechanical products, Robotics and Automation. Join our winning team today. Together, well accelerate the real-life impact of tomorrows science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit www.danaher.com. At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Essential Skills JOB DESCRIPTION Sound Knowledge In Mechanical Design In Following Areas Mechanical packaging Design with different parts and sub-assembly to form a product by meeting customer requirements Have strong understanding on different manufacturing processes like plastic injection molding, metal parts machining, casting, sheet metal process, joining methodologies (crimping, welding, brazing, soldering) and sensor encapsulation methodologies Good knowledge about materials such as engineering plastics, metals, plating Expertise in 3D modeling and parametric detailing, family tables. Expertise in using CAD package Pro-Engineer Exposure to Six Sigma methodology and statistical analysis. Experience on GD&T, Statistical Tolerance Analysis, Design for Manufacturability and Assembly Predict, quantify & Mitigate technical risks in the product design. Expertise in developing DFMEA, PFMEA , control plan and process flow chart Exposure to handling engineering change request and engineering change order. Experience in Oracle and MRP tool will be added advantage Conceptualize the product and translate the requirements into CTQs for design Exposure to full design life cycle in New product development Problem solving Skills: Independently leads problem analysis to develop new processes and procedures. Demonstrates accountability (collaborating with others) for the design / implementation/ delivery of subsystem/product Writes a project final report/ Major project team presentation or demonstration to a divisional customer or management. Good Business Communication skills: Interacts with Partners at global locations, local team members & management stake holders and customers for requirements capturing. Works with all the stakeholders to ensure that technical objectives are met with the given project/program constraints. Active participation in the project planning/execution phases for technical risk management Responsibilities RESPOSIBILITIES: Work in a global team as an Individual contributor with significant responsibilities and ownership of mechanical design. The responsibilities include mechanical packaging design and development, simulation, building proto, verification and sometime characterization testing. Be able to perform mechanical design function on new product development teams defining customer requirements, develop and select best concepts, designs, and implementation into production of new sensor solutions. Additional responsibilities include technical report generation, documentation and progress reporting. It is also expected that the candidate would develop technical expertise in the selected product line, develop proposals for growth ideas and work for improving the product line. He/She needs to have proven record of design delivery in a New Product Introduction (NPI) team for at least 4 yrs. Qualifications QUALIFICATION : B.E/ B. Tech/ M.E/ M.Tech in Mechanical Engineering EXPERIENCE : 7+ years of experience About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.

The candidate will also be working on consultancy projects on redesigning e-commerce customers website taxonomy and navigation. The ideal candidate must possess strong communication skills, with an ability to listen and comprehend information and share it with all the key stakeholders, highlighting opportunities for improvement and concerns, if any. He/she must be able to work collaboratively with teams to execute tasks within defined timeframes while maintaining high-quality standards and superior service levels. The ability to take proactive actions and willingness to take up responsibility beyond the assigned work area is a plus. Apprentice_Analyst Roles and responsibilities: Data enrichment/gap fill, standardization, normalization, and categorization of online and offline product data via research through different sources like internet, specific websites, database, etc. Data quality check and correction Data profiling and reporting (basic) Email communication with the client on request acknowledgment, project status and response on queries Help customers in enhancing their product data quality (electrical, mechanical, electronics) from the technical specification and description perspective Provide technical consulting to the customer category managers around the industry best practices of product data enhancement Technical and Functional Skills: Bachelors Degree in Engineering from Electrical, Mechanical OR Electronics stream Excellent technical knowledge of engineering products (Pumps, motors, HVAC, Plumbing, etc.) and technical specifications Intermediate knowledge of MS Office/Internet.

Educational Requirements Master Of Comp. Applications,Master Of Engineering,Master Of Science,Master Of Technology,Bachelor Of Comp. Applications,Bachelor Of Science,Bachelor of Engineering,Bachelor Of Technology Service Line Engineering Services Responsibilities A day in the life of an Infoscion As part of the Infosys consulting team, your primary role would be to get to the heart of customer issues, diagnose problem areas, design innovative solutions and facilitate deployment resulting in client delight. You will develop a proposal by owning parts of the proposal document and by giving inputs in solution design based on areas of expertise. You will plan the activities of configuration, configure the product as per the design, conduct conference room pilots and will assist in resolving any queries related to requirements and solution design You will conduct solution/product demonstrations, POC/Proof of Technology workshops and prepare effort estimates which suit the customer budgetary requirements and are in line with organization’s financial guidelines Actively lead small projects and contribute to unit-level and organizational initiatives with an objective of providing high quality value adding solutions to customers. If you think you fit right in to help our clients navigate their next in their digital transformation journey, this is the place for you! Additional Responsibilities: Ability to develop value-creating strategies and models that enable clients to innovate, drive growth and increase their business profitability Good knowledge on software configuration management systems Awareness of latest technologies and Industry trends Logical thinking and problem solving skills along with an ability to collaborate Understanding of the financial processes for various types of projects and the various pricing models available Ability to assess the current processes, identify improvement areas and suggest the technology solutions One or two industry domain knowledge Client Interfacing skills Project and Team management Technical and Professional Requirements: Primary skills:Technology-PDM , PLM-Windchill Desirables:Domain-IOT-IOT-ALL Preferred Skills: Technology-PDM / PLM-Windchill

Job Overview We are seeking a highly skilled and experienced Lead Electro-Mechanical Engineer to join our dynamic engineering team. This role demands a strong background in medium voltage distribution automation and substation switchgear product design and development . The ideal candidate will bring deep technical expertise in protection and switchgear products , with a proven track record of driving innovation and delivering high-performance engineering solutions for modern power systems. Education: M.Tech – Power systems / B.Tech – Electrical engineering or Mechanical engineering Experience: Minimum 7 to 10 Yrs Minimum 6 years’ of experience in electrical/power/utility industry dealing with medium voltage protection and switchingear products Experience in independently leading a large size switchgear project from scratch to launch. A Day In The Life Interact with US clients to understand and gather project requirements. Lead design & development of medium voltage protection and switchgear product/ sub-system design as per the requirements. Research, review, and implement best practices, new and emerging technologies, and design patents for new and existing development. Generate conceptual 3D design, engineering calculations and detailed design for extensive range of electro-mechanical products using Autodesk Inventor or SolidWorks’. Converting the ideas into practically feasible product-oriented design. Validate conceptual design integrity using FEA analysis. Deliver complete and accurate detailed design drawings as required for part manufacturing with GD&T. Create Drawings based on ASME Y14.5M – 1994 standards. Generate documentation including design spec, DFMEA, part drawings, engineering bill of materials and assembly drawing per Hubbell standard. Good understanding of IEEE standards and experience in creating the type test plan. Experience in conducting the type test with external laboratories. Support manufacturing team in defining the product manufacturing process flow, PFMEA, control plan and with new tooling validation. Driving the project from scoping phase to launch phase. Working knowledge in vault, windchill and SAP is required. Knowledge of DFM and DFA is an added advantage. What will help you thrive in this role? Hands on experience in designing fault interrupting products such as VCB/ACB or recloser or circuit breaker (any one preferred). Sound knowledge in designing medium voltage disconnecting switches and load breaking air insulated or gas insulated switchgears. Hands on experience in designing latching and actuating mechanisms for VCB/ACB/recloser/capacitor switches (any one preferred). Knowledge in arc plasma physics and its interruption. Knowledge in electro-mechanical and electro-magnetic assemblies. Basic knowledge in magnetics design & selection of electro-mechanical actuators like solenoids & Ct’s or transformers. Hand on experience in short circuit test, di-electric testing, short time withstand current test and its result interpretation. Working knowledge in any one PDM and PLM software’s. Proficient in creating Geometric Dimensioning and Tolerancing (GD&T) as well as fabrication drawings using Inventor and SolidWorks. Proficient in sheet metals, castings and plastic design and its manufacturing process.

At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You’ll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. A Day in the Life Collaborating with cross-functional teams to develop comprehensive product risk management files, including the risk management plan, Hazard Analysis, DFMEA, and risk management report, adhering to ISO 14971 standards. Responsible for maintaining highest standards of product reliability and patient well-being through gather and analyze data, write reports, and communicate with regulatory agencies on ensuring product safety. Responsibilities may include the following and other duties may be assigned: Capability to conduct thorough reviews of new and modified product design documentation, assessing quality characteristics such as manufacturability, serviceability, testability, reliability, and compliance with product requirements. Subject matter expert in risk management for designated medical device products or platforms. Ensuring compliance with FDA Quality System Regulations, EU MDR, ISO 13485, ISO 14971, IEC 60601, and other relevant industry standards during product development and changes. Reviewing Design History Files and Technical Files to ensure alignment with applicable requirements. Collaborate with cross-functional teams to gather and analyze data related to the performance and safety of medical devices and independently develop Periodic safety update plan and reports. Partner with regulatory affairs and medical experts to ensure accurate and timely submission of PSURs to regulatory authorities. Continuously monitor and stay updated with evolving safety regulations and guidelines to ensure PSUR compliance. Familiar with Literature review, PMCF, IMDRF coding, CAPA and NCMR. Hands on experience in signal evaluation trending and reports, preliminary code reviews for the product complaints on periodic basis. Delivering presentations on project status and issues to the QA organization and providing training to other departments on relevant procedures and policies. Participating in audits and demonstrating the ability to effectively contribute as a team player in various roles, including contributor, subject matter expert, leader, and facilitator. Provide Quality support to facilitate resolution of product complaints and/or safety issues Previous experience working in a cross-functional team environment. Familiar with statistical software tools (Minitab) Develop templates and trainings based on the quality system regulations, applicable standards and guidance. Independently review all deliverables to ensure compliance with development process and the standard. Demonstrates ability to effectively play multiple roles on a cross-functional team including contributor, subject matter expert, leader, facilitator. Hands-on experience on complaints analyis, Post market surveillance, Design Controls for Medical Devices. Required Knowledge and Experience B E or B.Tech in Mechanical/Biomedical Engineering Minimum 4-6 years of quality engineering experience or equivalence and overall 6-8 years of experience. Familiar with ISO 9001, ISO 13485, ISO 14971, IEC 60601, 21 CFR part 820, 21 CFR part 11, EUMDR and product specific industry standards. Working knowledge of and auditing experience to the FDA Quality System Regulation, ISO 13485, and the Medical Device Directive. Good verbal and written communication skills Understanding of post-market surveillance processes and adverse event reporting. Knowledge of risk management principles and hazard analysis in the context of medical devices. Physical Job Requirements The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. Benefits & Compensation Medtronic offers a competitive Salary and flexible Benefits Package A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage. About Medtronic We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission — to alleviate pain, restore health, and extend life — unites a global team of 95,000+ passionate people. We are engineers at heart— putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary.

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Must be a BE/BTech in mechanical engineering at a minimum from a reputed university 4 to 8 years of experience in working on mechanical product development Willingness to work on NPD, VAVE, Sustaining projects. Desired to have worked across all phases of new product development processes- initiation, requirements management, concepting, detailed design, verification & validation, handing over for production with accountability of deliverables across phases Ability to collaborate and work in a team environment. Ability to build good rapport with Cross functional teams Ability and desire to lead positive change through systems and process improvement Experienced and proficient with 3D CAD software (preferable Proe/ Creo) Excellent communication and presentation skills Experienced and proficient user of MS Office software Experience in liaising with overseas manufacturers Good working knowledge of DFMEA, DVP, PPAP, GD&T, tolerance analysis and other product development associated techniques and tools Good knowledge on different manufacturing processes Experience with Electromechanical product development is a bonus Having an experience with working on electromechanical projects will be an added advantage Quickly learn established engineering processes (like Product development process - preferable Windchill, ECN, BOM, RFQ, etc.), standards, methods and procedures needed to accomplish assigned tasks with discipline. Be able to prioritize work, meet agreed project timelines, cost and quality We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we’re required to, but because it’s the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. © Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Responsibilities & Key Deliverables Product Knowledge for Construction equipment, trends in industry, innovations to ensure reliable and sound electrical systems based on application requirements Ensure creation and adaptation of various electronics system in the vehicle like (GPRS, Telematics, and Multi-mode operation, communication strategy between man and machine, vehicle to vehicle and within vehicle) for differentiated product value proposition based on under-standing of customer needs. Development of electrical parts like lamps, wiring harness, temps, cluster etc. with latest technology and integration at vehicle level To keep update with latest development of EES systems and incorporate the same on vehicle. To design and develop diagnostic and prognostic tools and strategy To work with interfacing areas like EMS, ABS, telematics and develop approach for development for Construction Vehicles Working CAD / TC knowledge: CATIA V5 R17 / Siemens DFM, DFA,DTC, DFMEA, QC story Development of system for the departmental processes to ensure adherence to MPDS (Mahindra Product Development System) To build organization structure for EES team and development of team members Liasioning – Internal (various aggregate members) for ensuring synchronizing of priorities and External (Vendors) for timely part development Experience 15-22 yrs. Industry Preferred Qualifications BE/ ME (Electrical and Electronics) General Requirements Job Segment: Electronics Engineer, Construction, Electrical, CAD, Drafting, Engineering

Responsibilities & Key Deliverables Product Knowledge for Construction equipment, trends in industry, innovations to ensure reliable and sound electrical systems based on application requirements Ensure creation and adaptation of various electronics system in the vehicle like (GPRS, Telematics, and Multi-mode operation, communication strategy between man and machine, vehicle to vehicle and within vehicle) for differentiated product value proposition based on under-standing of customer needs. Development of electrical parts like lamps, wiring harness, temps, cluster etc. with latest technology and integration at vehicle level To keep update with latest development of EES systems and incorporate the same on vehicle. To design and develop diagnostic and prognostic tools and strategy To work with interfacing areas like EMS, ABS, telematics and develop approach for development for Construction Vehicles Working CAD / TC knowledge: CATIA V5 R17 / Siemens DFM, DFA,DTC, DFMEA, QC story Development of system for the departmental processes to ensure adherence to MPDS (Mahindra Product Development System) To build organization structure for EES team and development of team members Liasioning – Internal (various aggregate members) for ensuring synchronizing of priorities and External (Vendors) for timely part development Experience 15-22 yrs. Industry Preferred Qualifications BE/ ME (Electrical and Electronics) General Requirements Job Segment: Electronics Engineer, Construction, Engineering Manager, CAD, Drafting, Engineering