38 Detailed Engineering Jobs

Job Title: Hydraulic Engineer (Dams/Hydropower/PSP Projects) Key Responsibilities: Assist in the hydraulic design and analysis of structures such as spillways, energy dissipators, intakes, tunnels, surge shafts, and penstocks. Perform hydrological and hydraulic modeling using relevant software (e.g., Hammer, HEC-RAS, ANSYS CFD). Support in the preparation of design reports, technical specifications, and construction drawings for hydraulic structures. Conduct hydraulic transient analysis for water conveyance systems in hydropower and PSP projects. Collaborate with geotechnical, structural, and electro-mechanical teams for integrated design solutions. Perform site investigations, data collection, and analysis to support hydraulic studies. Assist in the review and evaluation of contractor submissions, drawings, and technical documents. Participate in physical model studies and verification of hydraulic designs when necessary. Ensure compliance with relevant standards and codes (e.g., IS, BIS, ICOLD, USBR). Contribute to the preparation of feasibility studies, DPRs, and tender documents. Required Qualifications: Bachelors Degree in Civil Engineering with specialization or coursework in hydraulics or water resources. Master’s Degree in Hydraulic Engineering, Water Resources, or related field (preferred). 3–5 years of relevant experience in hydraulic engineering for dams, hydropower, or PSP projects. Proficiency in hydraulic modeling software and strong understanding of fluid mechanics principles. Good written and verbal communication skills for technical reporting and coordination.

Design and detailed engineering of integrated infrastructure of SEZ, Industrial/Residential townships. Experience 5-8 years Qualification B.Arch Desired Profile Design Architect with experience in reviewing of drawings in commercial & residential sector. Candidates with coordination experience need not to apply.

Purpose of the Job: This position will be responsible for all aspects to lead the utility engineering part of the Integrated PV Plant (Ingot, wafering, cell, module) with complete End to End utility project execution, Engineering, installation, commissioning and taking over the utility operations and maintenance subsequently. He needs to coordinate with Licensor/ EPC supplier/ Consultant/ Engineering team / Equipment Vendor / Raw materials vendor and lead the whole utility team for timely completion of the projects, installation and commissioning. Primary & Secondary Responsibilities: Assist in the definition of project scope and objectives, involving all relevant internal stakeholders and ensuring technical feasibility Facility Management: Utility system Engineering, erection and operation & maintenance which includes mainly Compressed Dry Air, Ultra-Pure Water, DI-Water, sewage treatment plant, ETP, ZLD, desalination plant, Scrubbers, Process Chemical Handling, Process Exhaust System, Process Gas System, HVAC with Clean Room, VAM & Electrical Chillers, Fire Hydrant System, FADS, DCS, Disaster Management Centre with life safety alarms & control, GIS, AIS, Fuel Handling etc. Responsible for all site activities comprising Electrical, Mechanical and Control & Instruments, Engineering, procurement support, Equipment Erection, Testing & Commissioning, Planning, Quality & Documentation related to Utility. Co-ordinate with all stack holders to collect, compile and provide the inputs in full and within agreed time line to engineering consultant for designing of the Utility for the plant. Should have proper knowledge and understanding about the engineering documents like MDL, DBR, RFQ, P&IDs, SLD, PFD, TBA, VDR etc. Ensure the engineering documents generated by consultant are in full and contains all the details which are required by vendor to provide the offers. Ensure the timely review and approval of the engineering documents by package owner appropriately. Ensure that the Utility packages are not Over / Under designed. Evaluate the bids in line with RFQ i.e., plant requirement. Proper and timely review and approval of Vendor Documents (VDR) by engineering team and utility team member. Ensure the utility execution is as per approved design and specifications only, any change in design during execution should follow the change management procedure and all changes are captured in the as build drawing and / or in relevant document. Should have complete understanding of the contract management for all the packages; ensure the vendor is fulfilling quality, safety, FAT, SAT, timelines, progress report etc as per PO. Must be able to develop, track, control & implement all important elements of Site activities like, Initiation, Planning, Integration Management, Scope, Time, Cost, Quality Management, Risk management, and Project Monitoring & Control & Project Closing, etc. Must coordinate with concerned authorities and agencies for obtaining required statutory & regulatory clearances, especially for Power, water, gas & chemicals. Meet budgetary objectives and make adjustments to project constraints based on financial analysis Measure performance using appropriate project management tools and techniques Report and escalate to management as needed Manage the relationship with the various departments, consultants, relevant stakeholders & third parties/vendors Perform risk management to minimize potential risks Use and continually develop leadership skills Ensuring cost effective sourcing of spares and consumables, utility services contracts for its operations and maintenance requirement. Must be a resourceful person in developing, implementing and continuously upgrading Preventive Maintenance Systems in utility to improve the Equipment reliability & availability. Budgetary planning for the maintenance activity. Capital expenditure planning & procurement for the volume increase. Must be accountable for department wise monitoring & execution of key projects along with constantly upkeep track & control the project cost. Preventive, Predictive, breakdown maintenance, and condition monitoring. Calculation of MTBF, MTTR, OEE and Kaizen to improve the performance and availability of machine tools. Cost & Quality Management: Energy Auditing, IMS, effective material resource planning to ensure ready availability of all consumables, identifying & developing alternate vendor for cost effective procurement of materials, optimization of utility cost, Break Down analysis (MTTR, MTBF), application of various problem solving tools. Conducting safety Audits & inspection and facilitate to close the findings within agreed timelines. Supporting EHS in developing & implementation of workable systems. Providing uninterrupted utility supplies at optimum cost & within agreed quality parameters. Monitoring & improving PM Compliances, Equipment uptime, Inventory, Specific Consumptions, O&M cost, Safety etc. Implementing SOPs, RCA, CAPA. Ensuring 100% Compliances of Legal & Statutory norms & requirements. Preparing Annual Budget, monitoring & controlling the expenses within budget. Executing expansion, cost optimization& process improvement projects without any time / cost overrun. O&M contracts evaluation and cost optimization thru multi skilling, process improvement and engineering control. Knowledge and Skill-set: 1 Meticulous understanding of utilities; i.e., mainly Compressed Dry Air, Ultra-Pure Water, DI-Water, sewage treatment plant, ETP, ZLD, desalination plant, Scrubbers, Process Chemical Handling, Process Exhaust System, Process Gas System, HVAC with Clean Room, VAM & Electrical Chillers, Fire Hydrant System, FADS, DCS, Disaster Management Centre with life safety alarms & control, GIS, AIS, Fuel Handling etc. 2 Capable to handle all aspects of Project pertaining to utilities; mainly pre and post order engineering (which includes scope of engineering consultant, selection, timely review and approval of engineering document, vendor documents, change management etc), planning, quality, safety, execution, testing, commissioning, FAT, SAT, bill approval (finances), handover takeover of system etc. 3 Thorough knowledge of Preventive / predictive maintenance of utilities systems. 4 Set KPI, KRA, SOPs etc. 5 IMS & Energy Conservation. 6 Problem solving & analytical skill. 7 Reporting & Communication skill. 8 Plan, organize & drive for results. 9 Leadership & team building. 10 Safety, Cost, Quality & Time consciousness. 11 Basic soft skills required for Project management and Utility (O&M). Qualification: B.E / B.Tech Mechanical (Preferred) /Electrical / Electronics & Instrumentation / Chemical Engineer Designation: HEAD UTILITY (Engineering and O&M) Experience: 15-25 Years hard-core Utility design, Engineering, execution, O&M experience; preferably in Solar manufacturing (Ingot, wafer, Cell and Module)/ Semiconductor / other industries having similar type of utility.

Position - Design Engineers - Structural / Electrical / I&C / Telecom / Process / HSE / Piping / Mechanical / Project Management Qualification: B.E./B.Tech in relevant discipline Job Overview We are looking for experienced Design Engineers across multiple engineering disciplines to support detailed engineering, design, and execution of offshore oil & gas projects. The ideal candidate will have strong technical expertise, multidisciplinary coordination experience, and preferably prior exposure to FPSO/FLNG projects. Key Responsibilities Prepare, review, and validate engineering deliverables (drawings, 3D models, specifications). Perform design calculations and ensure compliance with international codes and client requirements. Support feasibility studies, basic/detailed engineering, and design optimization. Coordinate with multi-disciplinary teams (process, mechanical, electrical, instrumentation, piping, HSE, etc.) for integrated designs. Participate in design reviews, HAZOPs, risk assessments, and constructability checks. Liaise with vendors, contractors, and project management teams for technical clarifications. Ensure deliverables meet project schedules, budgets, and quality standards. Discipline-Specific Scope Structural: Offshore module structures, foundations, equipment supports, lifting analysis. Electrical: Power distribution, load calculations, SLDs, earthing, lighting, and cable routing. Instrumentation & Control: Control system design, instrument layouts, loop diagrams, hook-ups. Telecom: Offshore communication systems design, cabling, fiber optics, network layouts. Process: PFDs, P&IDs, mass balance, process safety, and system optimization. HSE: Fire & gas detection, safety layouts, escape route planning, risk analysis. Piping (Layout/Stress/Materials): Piping layouts, isometrics, stress analysis, materials selection, and material handling studies. Mechanical: Static/rotating equipment design, package integration, vendor data review. Engineering Project Management: Monitor project schedules, budgets, risks, and ensure technical coordination across disciplines. Requirements B.E./B.Tech in relevant discipline. 15-24 years experience in design engineering for oil & gas/petrochemical projects. Proficiency in design software (AutoCAD, PDMS, E3D, Caesar II, ETAP, SmartPlant, etc.). Strong knowledge of relevant international standards (IEC, IEEE, ASME, API, ISO, etc.). Offshore project (FPSO/FLNG) experience preferred. Strong communication, problem-solving, and team collaboration skills.

Dear Candidate, Greetings from RightHire!! We've been retained by one of the leading company into oil & gas to fulfil its manpower requirement. And currently, were scouting for Sr Manager - Electrical Design to be based out in Navi Mumbai . Please find below a brief JDs & revert me back with your updated CV should the role suits & excites you to join in such a prestigious company. Job Responsibility: - Engineering Design of Electrical scope: Development of site-specific deliverables (Power, earthing, equipment layout) Cable sizing Transformer/ DG sizing Electrical equipment sizing Preparation, checking, review of site layouts Preparation of SLDs Preparation of BOQ/ SOQ/ Material take off report. Preparation and review load lists. Design calculations Lighting and illumination Lighting calculation Earthing calculations Preparation of cable schedules Material technical inspections, Conducting FAT/ SAT at vendors/ manufacturers work Preparation of TBE for materials and services Timely deliverables as per agreed norms of quality and HSSE Incorporate new developments in design and standards Stay abreast of developments in technology / industry / competition Engineer and implement projects to meet business requirements Develop standard engineering drawings / specifications based on design basis Timely deliverables as per agreed norms of quality and HSSE Incorporate new developments in design and standards Stay abreast of developments in technology / industry / competition People development for enhanced capability & productivity Developing training modules and conduct training programs Create in house competency to meet all engineering needs Bring focus and continually improve practices related to HSSE Review & incorporate safety aspects /checks in existing designs & ensure awareness by available communication avenues. Perform root cause analysis of accidents / near miss reports; implement corrective actions to avoid recurrence. Asset management to enhance reliability & productivity Carry out root cause analysis of failures and provide optimum solutions to enhance reliability Maximize customer satisfaction (internal & external) and take corrective action on feedback Thanks & regards, Ankita Specialist - Talent Acquisition RightHire Mail Id: careers2.righthire@gmail.com

You should be a BE Electrical with 10 to 15 years of relevant experience acquired from the Oil and Gas/Refinery/Power industry. As an Engineer, you will be responsible for handling Basic, FEED, and Detailed Engineering tasks while leading a team for the project. Your proficiency should include conducting Electrical System Studies using sp3d Software, Electrical Equipment Sizing including Cable Sizing & Lighting calculation, as well as preparing Technical Specification, Data Sheets, Material requisitions, Work Requisitions, Technical Bid Evaluation, and Vendor Document review of Major Electrical Equipment. Your role will involve preparing Electrical Design Basis, Electrical Load list, Cable List, Single Line Diagrams, Electrical Schematics, and Wiring Diagrams, as well as Interconnection Schedule. Furthermore, you will be expected to engage in Layout Engineering activities, such as designing Cable tray, Cable routing, Lighting, Lightning Protection, Grounding layouts, including Installation Details and Material Take off. Proficiency in using Navisworks for 3D model review will also be necessary for this position.,

At Jacobs, you are tasked with challenging today to reinvent tomorrow by addressing the world's most critical issues for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery, and cutting-edge manufacturing. Your role involves turning abstract ideas into realities that positively transform the world. As an innovator and problem solver at Jacobs, you will have a significant impact by turning challenges into opportunities for smarter, more connected, and sustainable solutions. In the field of life sciences, your responsibilities will include designing spaces that encourage innovation, foster collaboration, and drive groundbreaking discoveries for the betterment of humanity. Your expertise and collaborative spirit will contribute to the growth and fulfillment of your potential within our team. Your primary responsibilities in this role encompass project delivery, design management, and project management. You will be instrumental in positioning and winning projects across various services by collaborating with commercial, project management, engineering, and design technical leaders. This collaboration aims to create opportunities for Jacobs to plan, develop, deliver, and operate a diverse range of projects. Key responsibilities include: - Reviewing and checking effort-hour estimations for proposal preparation - Conducting feasibility studies, conceptual design, and detailed engineering - Ensuring clear definition of interfaces between disciplines - Capturing all required inputs accurately for process design - Ensuring accurate capture of process requirements in specifications - Participating in technical discussions with stakeholders to develop process configurations - Conducting technical and safety reviews such as HAZOP/SIL - Monitoring the status of process engineering deliverables to meet schedule due dates - Ensuring the technical quality of all process deliverables issued - Participating in the planning of pre-commissioning and commissioning startup activities - Experience in utility system process design including Instrument Air, Boiler, Fuel Gas, DI Water, Cooling Tower, HVAC, Chilled Water, Low Temperature Refrigeration, Hot Oil System, Wastewater Treatment, Chemical Storage and Delivery Systems, and Chemical Dosing Systems Skills and Competencies Required: - Bachelor's in Chemical Engineering with 6-8 years of experience in Design Engineering - Experience in a design consulting organization, particularly in Industrial Projects - Experience in sectors including Specialty Gases (Silane, Ammonia, Nitrous Oxide, BCl3), Specialty Chemicals (Fertilizers, Ammonia, Agrochemicals), and Semiconductor (ATMP, OSAT, FAB) We Offer: - International working environment and unique company culture - Personal development opportunities - Friendly atmosphere in a dynamic team - Transportation facility at no additional cost At Jacobs, we are dedicated to creating a culture of caring and inclusivity where you can be yourself. By joining Jacobs, you become part of a global network that values diverse perspectives and backgrounds. Together, we collaborate, share, and support each other to succeed. With a focus on safety and flexibility, we provide the means and space for you to maximize your potential. You will have access to flexible working arrangements, benefits, and opportunities to contribute positively to society through our global giving and volunteering programs. Location: Gurgaon, India,

As a Renewable Energy Engineer (Electrical) based in Gurgaon, you will report to the Product Head within the Renewable Energy department. Your primary role will involve working closely with the product manager and assuming the responsibilities of a project manager for various renewable energy projects. Your key responsibilities will include handling projects related to solar, wind, and battery energy storage systems (BESS) as a project manager. This entails overseeing all internal and external communications pertaining to the projects, conducting detailed engineering designs, and managing all aspects of project management such as cost control, team supervision, and stakeholder communication. To excel in this role, you must possess a deep understanding of wind, solar, and BESS projects, as well as experience in Owners Engineering, lender engineering projects, and electrical calculations and studies. Proficiency in software tools like Microsoft Word, Excel, and PowerPoint is essential for preparing detailed reports, feasibility studies, and resource assessments. In addition, you should be well-versed in relevant standards and guidelines such as IS, IEC, IEEE, and have the capacity to conduct research, travel to project sites, and collaborate effectively with diverse teams. Your ability to set deadlines, assign responsibilities, and ensure project completion within budget and scope will be crucial for success in this role. With 6-12 years of experience in the renewable energy industry, preferably in consulting, you are expected to possess a Bachelor's Degree in Electrical Engineering, with a Master's Degree in Energy Studies or Renewable Energy being advantageous. Strong communication skills, interpersonal abilities, and self-discipline are essential traits for this position. Moreover, your capacity to work within multiple projects, prioritize tasks, and coordinate effectively with team members are highly valued attributes. As part of the GBU Energy Solutions division under Tractebel Div1, you will contribute to National and International projects involving Solar, Wind, Hybrid, Storage, and Green Hydrogen projects. Your technical expertise in Basic Engineering, Detailed Engineering, Owners Engineering, and Lenders Engineering will play a pivotal role in the successful execution of these projects. The ideal candidate will possess good organizational skills, prioritization abilities, and a growth mindset to adapt to various challenges. Your role will encompass planning, coordinating team efforts, and ensuring project completion within deadlines. Your commitment to professionalism, time management, and continuous learning will be key to your success within this dynamic and innovative environment.,

You should hold a Bachelor's degree in Civil Engineering with a specialization in Structures, Geotechnical Engineering, or Transportation Engineering. Additionally, you must have a minimum of 10 years of experience in design and detailed engineering of highways, pavements, bridges, and other structures. Your responsibilities will include coordinating with clients, authorities, independent engineers, and consultants.,

You should possess a Bachelor's degree in Mechanical Engineering with a minimum of 15-20 years of experience in the manufacturing industry, particularly in process equipment manufacturing. Your responsibilities will include strategizing and planning for projects, mechanical design, obtaining customer approval, materials take-off, design change request, and resolving technical queries. You should have a good understanding of process equipment, manufacturing, and engineering principles. Strong business acumen and knowledge of relevant codes, standards, rules, and regulations such as ASME, TEMA, and IBR are essential. Proficiency in designing software like PV Elite, HTRI, AutoCAD, and Nozzle Pro is required. The ideal candidate must possess strategic thinking abilities, demonstrate ownership, make sound decisions, prioritize customer focus, and exhibit problem-solving and negotiation skills.,

At Jacobs, we strive to challenge today in order to reinvent tomorrow by tackling the most critical global issues that impact thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery, and cutting-edge manufacturing. Our mission is to turn abstract ideas into tangible realities that have a positive transformative impact on the world. In this role, as a Lead Process Engineer, you will play a pivotal role in project delivery, design management, and project management by leading and participating in various aspects of projects involving a diverse range of services. Your responsibilities will include reviewing and validating effort-hour estimations, overseeing process deliverables for proposal preparation, conducting feasibility studies, conceptual design, detailed engineering, and ensuring the technical quality of all process deliverables issued. Your expertise will be critical in collaborating with commercial, project management, engineering, and design technical leaders to identify opportunities for Jacobs to plan, develop, deliver, and operate a wide array of projects. You will be responsible for ensuring that all interfaces between disciplines are clearly defined, capturing all necessary inputs required for process design accurately, and participating in technical discussions with stakeholders to develop optimal process configurations. Additionally, you will lead technical and safety reviews, monitor the status of process engineering deliverables to meet schedule due dates, and be actively involved in the planning of pre-commissioning and commissioning activities. Your experience in utility system process design, including but not limited to Instrument Air, Boiler, Fuel Gas, DI water, Cooling Tower, HVAC, Chilled water, Low-temperature refrigeration, Hot oil system, Wastewater treatment, Chemical storage, and delivery systems will be invaluable to the successful execution of projects. To excel in this role, you must possess a Bachelor's degree in Chemical Engineering with 12-18 years of experience in Design Engineering. Prior experience in a design consulting organization, particularly in Industrial Projects, is essential. You should have a solid understanding of facility design and/or operation, with expertise in sectors such as Specialty Gases, Specialty Chemicals, Semiconductor, Solar Photovoltaic, Electric Battery, or Pharmaceuticals. At Jacobs, we value diversity, collaboration, and innovation. We offer a supportive and inclusive work environment where your unique background and perspective can contribute to our collective strength. Join us at Jacobs, where you can cultivate your professional growth, collaborate with industry leaders, and work on key projects that make a positive impact on the world.,

Process engineer is responsible for designing, optimizing and improving industrial manufacturing process to ensure efficient production, high quality output, and cost effectiveness by analyzing existing processes, identifying areas for improvement Required Candidate profile Candidate having basic engineering experiences for project (Preparation of PFD, Materials & energy balance. Carry out detailed engineering activities in coordination with engineering consultants

• Strong knowledge on Concept to commissioning (Feed, Basic Engineering, detailed engineering, Erection commissioning) •Responsible for review and assisting head electrical for approval of Electrical System Design Basis, Technical Specifications, Sizing Calculations, Layouts, RFQ, Contract / Tender documents, BOQ, and all other deliverables •Responsible to check data sheets, electrical system sizing, and procurement of the required electrical equipment/items like Cables, Cable Trays, Lighting Fixture, Transformer, DGS, HT/ LT Panels, MCC/PCC Panel, VFDs,APFC System, Busbars, HT/LT Cables, etc. •close cordination with bidder for developing engineering deliverables as per the project execution philosophy, carrying out FEED, Basic Engineering and Detail Engineering. •Responsible for Electrical system Installation engineering including review of 3D model, Cable & Cable Trays Layouts and Hook up diagrams, and MTO. Responsible for ensuring Workfront clearance and WORK availability to Contractor, expedite with Consultant and Project Team for timely availability of drawings. •Responsible for Quality and Workmanship for Electrical Work at site and ensure that work executed by contractor meets contract specifications, QAP, ITP, Quality management plan. • Prepare Construction Plan with help from Contractor, Consultant, and review of time schedule & plan. •Responsible for maintaining and archive soft copy and/or hard copy of Monthly Bills, Measurements Records, Documents, Drawings, Record/Instructions/ Records Books, and instruction/information given by management/ or consultant related to project work. •Preparation of rate analysis, BOQ as per the drawing & working of various items to be executed, finalized the vendor & cost of the contracts to execute the work at site including preparation of tender documents. •Schedule and participate in daily, weekly, monthly meeting with project team & EPC/LSTK consultant/ vendor for the project progress work. •Responsible for manpower, material,machineries etc. are available on time, resolve issues with contractors / Consultant and raise red flag before it gets delayed. • Assiting to Lead Electrical for Electrical Inspections & clearances during various stages of the project • Ensure and maintain safe working practices and procedures in the plant. •Any other duties commensurate with the role from time to time

The position at Nuberg Engineering offers a supportive and organized work environment with competitive salary, exceptional benefits, and professional development opportunities. Our company values diversity and provides an inclusive atmosphere where employees are encouraged to succeed. We believe in maintaining a healthy work-life balance and support our staff's personal growth. Education is highly regarded at Nuberg Engineering, and we are committed to equipping our employees with the necessary tools and training for their professional advancement. We are looking for candidates with 5-20 years of experience in the Chemical Process Plant, Oil & Gas, Refinery, Petrochemical, or Fertilizer industry. The position is based at our headquarters in Noida. Key Responsibilities: - Translate project/client requirements into electrical design solutions. - Develop electrical load lists, schematic diagrams, single line diagrams, cable schedules, and MTO using Smart Plant Electrical. - Participate in bid reviews and technical evaluations. - Execute detailed engineering and design of electrical systems for large-scale projects in the Chemical, Refinery, Oil & Gas, or Petrochemical sectors. If you are interested in joining our team, please send your CV to recruit@nuberg.in.,

At Siemens, you have the opportunity to be part of a global leader dedicated to innovation, quality, and excellence. This role provides the chance to work on challenging projects, grow professionally, and have a significant impact in the electrical and instrumentation domain, specifically in power plant and renewable energy projects. If you are passionate about leading a talented team and driving technical excellence, we encourage you to apply. As Siemens Energy, "We energize society" by assisting our customers in transitioning to a more sustainable world through innovative technologies and the ability to turn ideas into reality. This is achieved through: - Expanding renewables - Transforming conventional power - Strengthening electrical grids - Driving industrial decarbonization - Securing the supply chain and necessary minerals We are currently seeking an experienced Mechanical Engineer with 12-15 years of expertise in power plant engineering. The ideal candidate should have a strong focus on detailed design, engineering, and site installation, with hands-on experience in power plant mechanical systems such as piping, pressure vessels, heat exchangers, rotating equipment, and balance of plant (BoP) systems. Experience in Waste Heat Recovery (WHR) systems is advantageous. **Key Responsibilities:** **Mechanical Design & Engineering:** - Review and approve piping systems, including material selection, stress analysis, and thermal expansion considerations. - Review and approve technical specifications, P&IDs, and equipment layouts for power plant mechanical systems. - Perform calculations for heat exchangers, pressure vessels, pumps, and turbines, ensuring compliance with industry standards. - Review and approve CFD (Computational Fluid Dynamics) and FEA (Finite Element Analysis) for mechanical components. - Review and approve design specifications of steam and gas turbines, boilers, condensers, and cooling towers for operational efficiency. **Power Plant Installation & Site Support:** - Provide on-site technical design expert support during the installation, commissioning, and operation of power plant mechanical systems. - Conduct root cause analysis and troubleshooting of mechanical failures in plant equipment. - Collaborate with site teams to ensure proper alignment, balancing, and vibration analysis of rotating equipment. - Support in the installation of WHR systems, including integration with existing power plant infrastructure. **Compliance, Safety, and Quality:** - Ensure that all engineering designs comply with relevant international and national standards. - Implement safety protocols and risk assessment measures for mechanical systems. - Review QA/QC documentation, including NDT reports and welding procedures. **Vendor & Cross-functional Collaboration:** - Evaluate vendor proposals and coordinate with suppliers for procurement and fabrication of mechanical components. - Work closely with civil, electrical, and instrumentation engineers to integrate mechanical systems seamlessly into plant operations. - Participate in design reviews, HAZOP studies, and FMEA for risk assessment. **Performance Optimization & Waste Heat Recovery (WHR):** - Conduct efficiency analysis and recommend design improvements for plant mechanical systems. - Work on WHR feasibility studies, system design, and integration with power plants. - Implement heat balance calculations and optimize thermal cycles for better energy utilization. **Required Qualifications & Skills:** - B.E./B.Tech/M.E./M. Tech in Mechanical Engineering or a related field. - 12-15 years of experience in mechanical engineering, preferably in power plant design, installation, and commissioning. - Strong expertise in detailed engineering, mechanical design, and stress analysis. - Hands-on experience with piping, pressure vessels, heat exchangers, turbines, boilers, and cooling systems. - Proficiency in design software such as AutoCAD, SolidWorks, Ansys, Caesar II, PV Elite. - Familiarity with international standards like ASME, API, ISO, IBR, ANSI, TEMA, ASTM. - Experience in rotating machinery selection, vibration analysis, and alignment techniques. - Strong problem-solving, analytical, and decision-making skills. - Ability to conduct fluid dynamics and thermal analysis for power plant systems. - Experience with Failure Analysis, HAZOP, and FMEA for risk assessment. - Excellent communication, leadership, and interpersonal skills. **Preferred Qualifications:** - Experience with Siemens power plant systems and processes. - Knowledge of steam cycle analysis, Rankine cycle, and Brayton cycle. - Exposure to gas-based, coal-based, or WHR power plants. - Ability to manage multiple projects and support site activities efficiently. Siemens is a diverse and inclusive workplace where employment decisions are based on qualifications, merit, and business needs. Join us in building the future, one day at a time.,

The job is located at the Head-Office in Noida and requires a candidate with a qualification of B. Tech/BE/Diploma in Mechanical. With at least 4 years of experience, you will be responsible for coordinating with clients/consultants and internal departments such as Mechanical, Civil & Structural, and Electrical. Your role will involve liaising with procurement and site personnel to ensure the smooth running of projects. In this position, you will need to demonstrate technical skills in leading a team, conducting in-depth technical research related to projects, and supporting the team to achieve organizational goals. Having a good understanding of L2 and L3 schedule and other project monitoring tools is essential. You will also be accountable for coordinating inspections with clients and vendors/workers. Additionally, you will be tasked with system designing, plant engineering, and detailed engineering of projects, covering system layout in accordance with client/plant requirements. Your role will be crucial in ensuring the successful execution of projects and meeting client expectations.,

As an Assistant Manager - Design and Engineering (Civil Structure), you will be responsible for overseeing civil designs and detailed engineering for STP, WTP, ETP, TTRO plants. Your role will involve conducting civil costing and rate analysis for these plants, ensuring accuracy and efficiency in the process. You should be proficient in civil design software to effectively execute your tasks. Your communication skills will play a vital role in interacting with clients and other team members. Additionally, a strong understanding of design codes and standards is essential to maintain quality and compliance in all projects. Your contribution will be valuable in assisting the Proposal and process team for Biding, where your expertise will be utilized for successful project outcomes. The ideal candidate for this position should hold a BE in Civil Engineering along with a Master's degree in Structure, Civil, or Water Resources. A minimum of 5-10 years of relevant experience in the field is required to excel in this role. If you possess these qualifications and skills, we encourage you to apply and be part of our dynamic team in Mumbai and Nagpur (MH).,

You are invited to apply for the position of Head Project Engineering for T&D, Railways, & Solar (Design & Detail Engineering) at Amara Raja Infra Private Limited (ARIPL) located in Hyderabad. In this role, you will be responsible for planning and overseeing projects from ideation to completion, contributing to business development, execution, cost savings, and internal competency development. As the Head of Engineering, you will play a key leadership role in managing the engineering department. Your responsibilities will include overseeing pre-bid and detailed engineering processes for various projects such as EHV&UHV substations, transmission lines, railways, and large MW solar projects. You will also be in charge of day-to-day activities, site development projects, staffing, resources, mentoring, and maintaining a top-notch engineering department. Your role will involve staying updated on cutting-edge technologies and industry best practices, participating in contract review meetings, preparing technical documentation, conducting site surveys, developing design plans, and ensuring timely customer approvals for designs. You will also be responsible for vendor coordination, equipment procurement, engineering clearances, and seamless project execution through effective coordination with internal and external stakeholders. To be successful in this role, you should have a minimum of 22-25 years of relevant experience in engineering, with a strong background in pre-bid and detailed engineering. You must possess hands-on experience with design software such as PVsyst, E-TAP, AutoCAD tools, and MS Office. Additionally, you should have excellent communication, team management, strategic thinking, problem-solving, and decision-making skills. If you have a track record of successful technology tie-ups, collaborations, and technical paper presentations in the T&D and solar sectors, it would be considered a plus. You should also be familiar with national and international codes and standards related to engineering activities. If you are looking for an opportunity to lead a dynamic engineering team, drive innovation, and contribute to the success of projects in the power infrastructure sector, we encourage you to apply by sending your updated resume to ko1@amararaja.com. Join us at ARIPL and be a part of our mission to deliver excellence in engineering and project execution.,

As an experienced individual above the age of 58, ideally retired from esteemed organizations such as L&T, EIL, Godrej, you will be responsible for utilizing your expertise in detailed engineering to mentor young Engineers. Your role will involve guiding and supporting the development of the next generation of professionals in the field. If you are interested in this position, please send your job application to careers[at]crystalindustrial.in. Kindly ensure to mention the specific position you are applying for in the "Subject" line of the email. Preference will be given to candidates residing in or near Navi Mumbai. Your wealth of knowledge and background in reputable companies will be invaluable in shaping the growth and success of aspiring Engineers under your mentorship.,

The primary responsibility of this role is to plan, organize, and ensure the engineering and reliability of Battery Energy Storage Systems (BESS) with a focus on scaling up the system to GW power while adhering to approved budgets and cost optimization measures. You will be accountable for various aspects related to the engineering and reliability of energy storage systems, including detailed design review, systems integration with the grid, selection of appropriate batteries and power converters, commissioning and testing, performance monitoring, and continuous improvement in design and modification. Additionally, you will oversee statutory and regulatory compliance, preparation and review of engineering specification documents, liaison with OEMs and consultants to stay updated on technological trends, support procurement activities, and standardize maintenance practices. Your role will also involve identifying training needs and facilitating learning and skill development for engineers at various sites, setting milestones for the team, coordinating with technology vertical heads for commercializing new schemes/processes, evaluating repairs and refurbishment facilities, representing the organization in industrial forums and networking events, and participating in national-level conferences and seminars related to energy storage systems. To excel in this position, you should possess profound knowledge in detailed engineering of BESS and Power Converter systems, familiarity with power electronics principles, practices, and industry standards, expertise in developing and reviewing design guidelines, the ability to optimize layouts and electrical systems, and awareness of the latest technological trends in the power electronics and energy storage sector. Additionally, you should be proficient in simulation tools, system sizing calculations, integration techniques, and industrial testing procedures. The ideal candidate for this role should hold a BE/B.Tech/M.Tech degree in Electrical Engineering with a specialization in Power Electronics and have at least 15 years of experience in detailed engineering of power electronics converters and BESS.,

The world needs innovators and problem solvers who turn challenges into greater opportunities. At Jacobs, we push the limits of what's possible to make the world smarter, more connected, and more sustainable. In our life sciences work, we design spaces that foster innovation, cultivate collaboration, and drive the next great discovery for humanity. Bring your expertise and collaborative spirit to the team, and we will help you grow, pursue, and fulfill what drives you. In this role, you will be responsible for project delivery, design management, and project management, positioning and winning projects involving a range of services. You will collaborate with commercial, project management, engineering, and design technical leaders to create opportunities for Jacobs to plan, develop, deliver, and operate a range of projects. Your responsibilities will include: - Reviewing and checking the effort-hours estimation, process deliverables for proposal preparation. - Conducting feasibility studies, conceptual design, and detailed engineering. - Reviewing and checking process design deliverables. - Ensuring clear definition of all interfaces between disciplines. - Accurately capturing all inputs required for process design. - Ensuring accurate capture of process requirements in specifications. - Participating in technical discussions with owners, licensors, and suppliers to develop process schemes and configurations. - Conducting technical and safety reviews such as HAZOP and SIL. - Monitoring the status of process engineering deliverables to meet schedule due dates. - Ensuring the technical quality of all process deliverables issued. - Planning pre-commissioning and commissioning, startup activities. You should have the following skills and competencies: - Bachelor's in Chemical Engineering with 6-8 years of experience in Design Engineering. - Experience in a design consulting organization working on Industrial Projects. - Experience in sectors such as Specialty Gases (Silane, Ammonia, Nitrous Oxide, BCl3), Specialty Chemicals (Fertilizers, Ammonia, Agrochemicals), and Semiconductors (ATMP, OSAT, FAB). We offer: - International working environment and unique company culture. - Personal development opportunities. - Friendly atmosphere in a dynamic team. - Transportation facility with no additional cost. Jacobs. A world where you can be yourself. Join us to be part of an inclusive and caring culture where your unique perspective and background contribute to our collective strength. We collaborate, share, and support each other for mutual success. With safety and flexibility as our priorities, we provide the means and space for you to maximize your potential. Discover flexible working arrangements, benefits, and opportunities to make a positive impact globally. Join us at Jacobs to cultivate, nurture, and achieve your goals in a single global company.,

As a Lead Process Engineer at Jacobs, you will play a crucial role in project delivery, design management, and project management. Your responsibilities will include reviewing and checking effort-hours estimation, process deliverables for proposal preparation, conducting feasibility studies, conceptual design, and detailed engineering. You will ensure that all interfaces between disciplines are clearly defined and that all inputs required for process design are accurately captured. Your expertise will be essential in ensuring that process requirements for packages are accurately captured in specifications. You will participate in technical discussions with owners, licensors, and suppliers to develop process schemes and evaluate various options. Additionally, you will be involved in technical and safety reviews such as HAZOP and SIL, as well as monitoring the status of process engineering deliverables to meet schedule due dates. Your experience in utility system process design, including Instrument Air, Boiler, Fuel Gas, DI water, Cooling Tower, HVAC, Chilled water, Low-temperature refrigeration, Hot oil system, Wastewater treatment, Chemical storage, and delivery systems, will be valuable in this role. You will also contribute to the planning of pre-commissioning and commissioning startup activities. To qualify for this position, you should have a B.E. / B.Tech in Chemical Engineering with First Class and possess 18 to 20 years of total experience in handling design activities, with at least 5 years as a Lead Engineer in projects. Moreover, experience in the Solar Photovoltaic sector, particularly in Solar Cell, Ingot wafer, and polysilicon, is a must. At Jacobs, you will be part of an international working environment with a unique company culture that offers personal development opportunities. You will work in a friendly atmosphere within a dynamic team and have access to transportation facilities at no additional cost. Join us at Jacobs, where we are committed to driving a culture of caring, diversity, and collaboration, empowering you to maximize your potential and make a positive impact on the world. Location: Navi Mumbai, India,

As an Engineer/Senior Engineer in this role, you will be responsible for carrying out Basic Engineering for projects, including the preparation of PFDs and Material & Energy balances. You will also conduct detailed engineering activities in collaboration with engineering consultants, such as preparing P&IDs, Equipment lists, Layouts, Pump Hydraulics, and Instrument lists. Furthermore, you will be tasked with preparing utility load requirements, header sizing, and utility summaries for projects. Your responsibilities will also include conducting HAZOP studies, incorporating recommendations, and reviewing process data sheets for fabrication equipment, pump datasheets, and instrument datasheets. Additionally, you will prepare technical bid evaluations for equipment and coordinate with various disciplines and consultants to ensure project quality and schedule adherence. In this role, you will provide technical clarifications to Mechanical, Instrument, and Electrical departments during procurement from a process perspective. You will participate in DCS-related activities, including logic/recipe preparation and interlocks preparation, as well as in Factory acceptance tests (FAT) and Site acceptance tests for DCS commissioning. Moreover, you will be involved in providing training to operations teams, preparing tie-up lists for system integration, scheduling pre-commissioning and start-up activities, and participating in Pre Start-Up Safety Reviews (PSSR) with operations and SHE teams. Your role will also include commissioning projects through water runs, pilot trials, and batch trials, as well as troubleshooting to achieve desired output and product quality. Additionally, you will support R&D and Production by performing process calculations, design calculations, and developing flow sheets for existing/new equipment. You will conduct technical and economic analyses of production batches, work on the development of new processes, and conduct laboratory scale and pilot scale studies. Furthermore, you will be responsible for literature surveys and library work as required. To qualify for this position, you should have a minimum of a BTech/BE in Chemical Engineering, with an MTech/ME in Chemical Engineering being desired. The ideal candidate will have 15-20 years of experience in the field.,

At Jacobs, you are tasked with challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery, and cutting-edge manufacturing. Your impact is crucial as the world needs innovators and problem solvers who turn challenges into greater opportunities. At Jacobs, you will push the limits of what's possible to make the world smarter, more connected, and more sustainable. In this role, your responsibilities include project delivery, design management, and project management to position and win projects involving a range of services. You will collaborate with commercial, project management, engineering, and design technical leaders to create opportunities for Jacobs to plan, develop, deliver, and operate various projects. Your tasks will involve reviewing and checking effort-hour estimations, process deliverables for proposal preparation, conducting feasibility studies, conceptual design, and detailed engineering. You will also review and check process design deliverables, ensure clear definition of interfaces between disciplines, capture accurate process design inputs, and accurately specify process requirements for packages. Furthermore, you will participate in technical discussions with owners, licensors, and suppliers to develop process schemes, evaluate options for process schemes, conduct technical and safety reviews, monitor the status of process engineering deliverables, ensure technical quality of all process deliverables, and plan pre-commissioning and commissioning startup activities. Experience in following utility system process design including Instrument Air, Boiler, Fuel Gas, DI water, Cooling Tower, HVAC, Chilled water, Low-temperature refrigeration, Hot oil system, Wastewater treatment, Chemical storage and delivery systems, and Chemical Dosing Systems is required. To be successful in this role, you must possess a B.E. / B.Tech in Chemical Engineering with First Class qualification and have 18 to 20 years of total experience in handling design activities, with at least 5 years as a Lead Engineer in projects. Experience in the Electric Battery (Lithium Ion - Cathode and Anode) sectors is a must. Jacobs offers an international working environment, a unique company culture, personal development opportunities, a friendly atmosphere in a dynamic team, and transportation facilities at no additional cost. Join Jacobs, where you can be part of a world that values inclusivity, mental health advocacy, and a culture of caring that fosters individuality. Together, with diverse perspectives and backgrounds, we drive collective strength through collaboration and support, ensuring mutual success. With a focus on safety and flexibility, Jacobs provides support, means, and space for you to maximize your potential. You will find flexible working arrangements, benefits, and opportunities to contribute positively, such as participating in global giving and volunteering programs. Jacobs empowers you to cultivate, nurture, and achieve your goals within a single global company. Location: Navi Mumbai, All IN Regions, India.,

You will play a crucial role in planning, organizing, and ensuring the reliable and safe operation of EHV (>132KV) systems. Your support to the engineering team for conceptual design, commissioning, and testing of EHV systems for new projects will be instrumental in the success of the organization. Your main responsibilities will include providing technical support to Petrochemical, Polymer, Polyester & Refinery sites related to EHV System Reliability. This will involve overseeing performance monitoring and benchmarking, selecting and standardizing best practices, SOPs, and SMPs, as well as ensuring the implementation of GMS standards, guidelines, LFI, and safety group standards at sites. You will lead troubleshooting and provide support to sites for major and critical failures/issues, generating LFI and Alerts based on significant failures and safety incidents. Conducting RCAs (Root Cause Analysis) for equipment and EHV system-related failures, monitoring the implementation of RCA recommendations will also be part of your responsibilities. Introducing modern diagnostic techniques and tools to enhance the reliability and effectiveness of the testing and validation process will be essential. You will provide support to the Electrical Equipment Performance Management (EEPM) platform for EHV systems and prepare guidelines for sites" asset renewal plan and obsolescence management. Your role will also involve supporting the Procurement and Contracts team in developing and validating new vendors, products, and services. Additionally, you will participate in the commissioning of major equipment, de-bottlenecking, and modification during the project stage. You will be required to review and validate Capex/MOC-T proposals raised by sites and carry out statistical analysis for reliability improvement. Furthermore, conducting quality assurance, maintenance, and safety audits, as well as FAT & SAT of equipment when required, will be part of your responsibilities. Your support in conducting and validating various Power System Studies and EMTP studies, as well as participating in knowledge sharing and common practices meets across the group will be crucial. You will also assist in developing training modules, finalizing curriculums for external training programs, and conducting training and knowledge awareness sessions. Your skills in detailed engineering of EHV systems, knowledge of practices, codes, and regulatory standards associated with EHV systems and equipment, and experience with the operation and maintenance of EHV equipment will be vital for this role. Additionally, your ability to review and optimize layouts, electrical SLDs, BOQs, and knowledge of technological trends in the EHV sector will be beneficial. To qualify for this position, you should have a BE/B Tech/M Tech in Electrical Engineering with specialization in EHV/HV systems and a minimum of 15 years of experience covering basic engineering, installation, commissioning, and maintenance of EHV equipment, RTU, SCADA, and EDMS.,