123 Design Specifications Jobs

Understand the design specification, Power On Specification, and Power management specification. Understand boot firmware and reset flow. And/or Power management flow. Develop skills in verification tools and apply them successfully Develop the verification environment and test bench Debug fails using waveform, trace tools and debug RTL code Work with Design team in resolving/debugging logic design issues and responsible for deliveries Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise Experience in Design Verification - demonstrated execution experience of verification of logic blocks Strong in SoC verificationChip reset sequence and initialization, and/or Power management. Knowledge of verification methodology, Knowledge of HDLs (VHDL,Verilog) Good programming skills in C++/C/OOPs, Python/Perl Exposure in developing testbench environment, write complex test scenario, debugging and triaging fails Hardware debug skills backed by relevant experience on projects Exposure in developing testbench environment, write complex test scenarios Good communication skills and be able to work effectively in a global team environment Drive verification coverage closure Preferred technical and professional experience Knowledge High Speed Serdes Phy, PCIe, DDR, Ethernet protocol Knowledge of Chip-Initialisation , SCAN , BIST is a plus Scripting Expertise backed up relevant experience in the same Writing Verification test plans Functional and code coverage analysis and debug

Develop & design new products, Lead new product introduction activities as applicable & Liaise with other departments. Understand fit, form & function of product and components. Maintain drawings and models, calculations, specifications, BOM Required Candidate profile Analyzes new concepts, existing designs utilizing of structural, computational fluid dynamic, Magnetic analysis and simulation tools including ANSYS Fluent, CFX, Maxwell, Creo. Simulate and AMESim

You are a skilled Draughtsman with experience in preparing technical drawings for pharmaceutical and medical equipment. You should be proficient in AutoCAD and capable of creating accurate 2D and 3D drawings based on design specifications. This role requires close coordination with design, production, and quality teams to ensure precise and practical outputs for manufacturing. - Prepare detailed 2D and 3D drawings of pharma and medical equipment using AutoCAD or similar CAD software. - Work closely with design engineers to translate concepts and prototypes into technical drawings. - Revise drawings as per engineering changes and production feedback. - Maintain drawing documentation and version control. - Ensure all drawings comply with industry standards and internal specifications. - Assist in preparing technical manuals, BOMs (Bill of Materials), and assembly instructions. - Coordinate with production teams to resolve any drawing-related issues during fabrication. - Support R&D and quality teams with design validation and improvements. Qualification Required: - ITI/Diploma in Mechanical Drafting or Engineering. - 2+ years of relevant experience in equipment design for pharma, medical, or laboratory industries. - Proficient in AutoCAD; knowledge of SolidWorks or other CAD tools is an added advantage. - Good understanding of fabrication, sheet metal, and machining processes. - Ability to read and interpret technical drawings and specifications. - Strong attention to detail and accuracy. - Knowledge of GMP and pharma equipment design standards is preferred. No additional company details were provided in the job description.,

Role : Site Engineer - Field Gender : Male Experience : 3 yrs Salary : 30 K Immediate Joiners Civil Engineer preferred

Role Overview: At Jacobs, you will play a crucial role in reinventing tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery, and cutting-edge manufacturing. As an Electrical Engineer, your impact will involve project execution, installation, and commissioning of electrical equipment. You will be responsible for the calculation and design of electrical systems, including load summary, sizing of power equipment, DG sets, cables, and their schedule. Additionally, you will design electrical SLD with protection schemes, calculate illumination, and create earthing layouts. Your expertise will extend to designing ELV systems, primarily focusing on fire & alarm, access control, public address, and their interfacing with each other. Besides technical knowledge, you will be expected to lead projects, multitask effectively, and meet deliverable commitments. Your key responsibilities include: Key Responsibilities: - Attend meetings with clients to identify their requirements. - Propose systems and schemes based on client needs. - Prepare design specifications and develop layout drawings. - Create tender & enquiry documents for electrical equipment, package items, estimation of contractor MTO, and project costing. - Ensure compliance with IS / IEC / BS / NEC standards. - Coordinate with other inter-departments in the design process. - Communicate effectively with clients, suppliers, and contractors. - Track and monitor the progress of the job effectively. Qualification Required: - BE Electrical with ETAP or equivalent for electrical power system experience in Data Center Projects. - Proficiency in Dia-Lux or equivalent for lightning calculation. - AutoCAD skills. - Good computer literacy. Additional Company Details: At Jacobs, the company values people and believes in fostering a work environment that offers the right balance of belonging, career growth, and lifestyle. Employees are encouraged to collaborate, share knowledge, and innovate while working on key projects alongside industry leaders. Jacobs supports professional growth through flexible working arrangements, extended leave options, and various social, health, and wellbeing events and initiatives. The company's hybrid working policy empowers employees to split their work week between Jacobs offices/projects and remote locations, enabling them to deliver their best work. Jacobs prioritizes the application experience of candidates and is committed to adapting to make every interaction better. If you require further support or reasonable adjustments during the recruitment process, please contact the team via Careers Support.,

The Assistant Project Lead-Civil supports the Project Lead in managing and executing civil engineering projects. This role involves assisting with project coordination, technical oversight, and team management to ensure successful project delivery within scope, budget, and timeline. Key Responsibilities: Assist the Project Lead in planning, coordinating, and overseeing civil engineering projects Help develop and review project plans, specifications, and technical drawings Support in managing project schedules, budgets, and resources Coordinate with internal teams, subcontractors, and clients Conduct site visits to monitor progress and ensure compliance with design specifications Assist in preparing technical reports, change orders, and project documentation Help identify and mitigate potential project risks and issues Support quality control processes and ensure adherence to safety standards Contribute to client presentations and progress meetings Assist in mentoring junior engineers and technicians Support the procurement process for materials and equipment Help prepare project proposals and cost estimates Qualifications: Bachelors degree in civil engineering 3-5 years of experience in civil engineering projects Strong knowledge of civil engineering principles, practices, and software (e.g., AutoCAD Civil 3D, HEC-RAS) Familiarity with relevant codes, standards, and regulations Experience with project management tools and methodologies Excellent problem-solving and analytical skills Strong communication and interpersonal abilities Detail-oriented with good organizational skills Desired Skills: Knowledge of sustainable design practices and LEED principles Proficiency in ACAD software Understanding of construction methodologies and site management

Job Title: Senior Interior Design Manager Hospitality Working Hours: Monday to Friday, 4:30 PM - 1:30 AM IST (US Time) Location - Noida, Greater Noida, Ghaziabad Experience - 7-10+ years total experience with hospitality design portfolio (rooms + public areas) Role Overview We're looking for an experienced and driven Senior Interior Design Manager Hospitality to lead end-to-end design delivery for hospitality projects. This includes overseeing concept development to construction documents, managing FF&E specifications, ensuring design quality, and coaching a talented team of designers. You'll ensure brand compliance, drawing accuracy, budget alignment, and technical documentation, working in collaboration with internal stakeholders and global vendors. Key Responsibilities Design & Delivery Translate client briefs into compelling spatial concepts (rooms + public areas) Review and approve layout plans, guest flow, and functional adjacencies Ensure adherence to hospitality brand standards, local codes, and accessibility norms Quality Control Review drawings: plans, elevations, joinery details, and MEP coordination Approve Room Data Sheets, Door/Hardware Schedules, and Mock-Up Evaluations Lead design audits and issue Design Basis Reports FF&E & Specifications Manage room matrices and furniture take-offs Oversee spec creation using tools like DesignSpec/SpecSources Gatekeep nomenclature, finish codes, warranty/fire rating info 3D Visualization Set quality standards for SketchUp/Revit, Lumion/Enscape, V-Ray renderings Guide render scene setup, materiality, lighting, and walkthroughs Budget & Program Alignment Sequence deliverables and manage design schedules Provide Value Engineering (VE) options without scope compromise Maintain assumption logs, design risk registers, and change control Team & Vendor Management Coach and review the performance of design team members Coordinate with vendors, consultants, and stakeholders like Natson Development Ensure proper documentation and version control across all files and deliverables Required Experience & Skills Bachelor's degree in Interior Design or Architecture 7-10+ years total experience with hospitality design portfolio (rooms + public areas) 2-4+ years leading design teams and managing external vendors Strong command of AutoCAD; proficient in SketchUp/Revit, Lumion/Enscape/V-Ray, and Photoshop, and MS Excel (advanced) Experience with FF&E specs, room matrices, take-offs, and specification software Ability to read and coordinate MEP, lighting, and electrical drawings Excellent written and verbal communication in English Nice to Have Revit-based coordination and hospitality brand rollout experience Knowledge of sustainability guidelines (VOCs, lighting efficiency) Awareness of cost/lead-time dynamics in Indian sourcing Key Performance Indicators (KPIs) KPI-Target QC Effectiveness <2 major design-originated NCRs per phase Cost Alignment Meet or exceed VE savings targets Spec Accuracy Zero critical gaps in FF&E/specs at tender/shop drawing Team Growth Documented upskilling and CAD/render improvements Tools & Platforms AutoCAD (Primary) SketchUp / Revit Lumion / Enscape / V-Ray Photoshop MS Office (Excel Power User) Spec Software (DesignSpec, SpecSources, etc.) Cloud Collaboration (Google Drive / SharePoint / BIM 360)

Geotechnical Engineer Work Location: Gurgaon We invite you to bring your Geotechnics into play as you coordinate with other team members and the project manager for timely delivery of project. To succeed in this role you must have B.Tech in Civil Engineering and M.Tech in Geotechnical Engineering from premier colleges IITs/NITs/DTU. Are you our new Senior Engineer - Geotechnical - Bridges & Civils. Inviting bright minds Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative and empowering culture? We work to create a sustainable future and our inspiring projects and innovative solutions aim to set the standard among our peers. You will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave a positive impact on societies, companies and people around the world. You will join our REC Ground Engineering D epa rtment As our new Senior Geotechnical Engineer for REC RUK Ground Engineering team, you will be part of our world class innovation driven engineering design centre owned by an independent trust and its employees. REC is highly sophisticated centre of engineering excellence and based in our India head office in Gurgaon. Working in partnership with all our established offices globally REC is a centre for excellence in design by offering optimized solutions for UK based projects. Your key tasks and responsibilities will be: Interpretations of Geotechnical Investigation Reports and use of appropriate geotechnical design parameters. Ground improvement – CMC, PVD, Stone columns etc. Soil structural Interaction Analysis Modelling and Validation. Slope stability analysis and Support system design. Ground movement, Settlement Prediction and risk assessments for Urban structures. Instrumentation and Monitoring scheme proposals and data reviewing. Prepare Geotechnical/geological design specifications and design criteria. Sheet piles, Combi walls, Secant pile and other retaining system. Personal Attributes Excellent command of English language with proven report writing skills. Strong attention to detail and problem-solving ability. You take ownership for the deliverables, your learning and career growth. Ability to work independently and collaboratively in a multidisciplinary team. Your starting point for constant growth From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: Must possess hands on design experience included in heavy civil structures foundation, Ground improvement, Marine, Earth retention system. Experience in Geo-seismic hazard analysis, seismic risk assessment, or a related field. Experience with the European design code (Euro codes/British Codes) will be added advantage. Candidates having experience in working with Multinational Companies/Overseas will be preferred. Proficiency in Plaxis 2D, Plaxis 3D, WALLAP, GeoStudio. Knowledge of Python scripting/Automation is big plus. Should be a good team member and should coordinate with other team members and the project manager for timely delivery of project. Welcome to our Transport division Ramboll is a global transportation consultancy and we work on some of the biggest and most innovative infrastructure projects in the world. We are bright minds working within Transport worldwide, creating practical, sustainable and economic solutions for national transport authorities, private contractors and municipalities alike. Qualification Additional Information What we can offer you Investment in your development Leaders you can count on, guided by our Leadership Principles Be valued for the unique person you are Never be short of inspiration from colleagues, clients, and projects The long-term thinking of a foundation-owned company Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that’s where we start – and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realise their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. Deadline: 7-June-20Thank you for taking the time to apply! We look forward to receiving your application. Equality, diversity, and inclusion is at the heart of what we do We believe in the strength of diversity and know that unique experiences and perspectives are vital for creating truly sustainable societies. Therefore, we are committed to providing an inclusive and supportive work environment where everyone can flourish and reach their potential. We welcome applications from candidates of all backgrounds and encourage you to contact our recruitment team to discuss any accommodations you need during the application process.

Join our team as a Data Engineer, where you will develop and deliver comprehensive data solutions to meet business requirements. As a member of our dynamic team, your responsibilities will include creating and optimizing data pipelines and data models for data lakes and data warehouses towards specific microservices. The role encompasses responsibility for data ingress into data lake/DWH, ensuring the content, format, and integrity sustain throughout the data lifecycle. You will develop, test, and enhance data solution components and design detailed data solution interfaces and integration specifications. Propose implementation strategies based on designed solutions, estimating effort requirements and guiding data pipeline creation. Perform configuration, code walkthroughs, peer reviews, defect tracking, and unit testing of data solution components. Verify data solution after deployment and provide necessary maintenance and support. Carry out operational tasks including data loading, batch job scheduling, and monitoring. Analyze incidents to identify necessary corrections and areas for improvement. Ensure solution data quality, conduct corrective actions, and devise improvement plans. Support software deployment and integration into the target environment. Troubleshoot issues during system and integration testing, UAT, and production. The skills you bring include expertise in Data Lakes, Ericsson Operations Engine - Mode Of Operations, Software Deployment, User Acceptance Testing (UAT), Business Data Requirement, Statistical Graphics, Design Specifications, Data Quality, Data Solution Roadmap Support, Data Maintenance, Data Pipeline, Data Modeling, Software Testing, Requirements Specifications, and ITIL.,

KONE Technology and Innovation (KTI) is where the magic happens at KONE. It's where we combine the physical world – escalators and elevators – with smart and connected digital systems. We are changing and improving the way billions of people move within buildings every day. We are on a mission to shape the future of the industry with new technologies and sustainable innovations. We are now looking for a Technical Design Lead, AWS As a Technical Design Lead you take accountability and responsibility for upholding the integrity and quality of the technical designs of KONE IT AWS across their lifecycle. You guide teams to ensure that the technical designs and configurations are not only fit for purpose, but also continuously optimized and future proof. Technical Design Lead collaborates both with their own team and other relevant teams and ensures that planned changes are implemented in technically correct way. They validate and approve the technical designs during the incremental product development. Taking a lifecycle view, Technical Design leads play an active role in identifying opportunities to improve service performance and resolving critical situations in production. Technical Design Lead provides crucial hands-on support to platform and product owners on technical matters including, for example, identifying and resolving technical dependencies and identifying and addressing technical debt in the platforms and products. The position is based in Chennai or Pune, India and will report to the Platform Manager, Data Center & Cloud Platforms. Main responsibilities Collaborate with product owners and team members to clarify proposed changes to IT products and platforms from a technical point of view. Bring the technical perspective during backlog refinement and prioritization, including scoping technical changes and estimating their complexity and efforts. Ensure the integrity and quality of technical designs throughout the lifecycle of IT products and platforms. Create fit-for-purpose technical designs to implement prioritized backlog items, ensuring non-functional requirements are addressed. Maintain alignment of technical designs with applicable quality and compliance standards, including cybersecurity and data models. Responsible for keeping the complexity of technical designs low, by for example, minimizing custom implementations and actively promoting out of the box functionality where applicable. Plan and implement technical dependencies between IT products and platforms in accordance with agreed architecture guidelines. Review, validate, and approve technical changes, providing required technical guidance to team members. Ensure adherence to applicable agile processes within teams, such as Develop & Release, Govern Architecture, and Govern Quality. Proactively identify improvements to performance and eliminate technical debt in IT products and platforms. Support Operations teams in addressing critical operational issues. Responsible for technology management activities and supporting activities related to technical health checks, upgrades and maintenance of the technical elements of the IT products and/or platforms throughout their lifecycle. Maintain up-to-date technical documentation, including technical design specifications, and ensure overall quality of technical documentation. Promote DevOps ways of working within the product team and improve DevOps maturity capabilities and agile ways of working. Professional Requirements: Functional and architectural understanding of IT products, platforms and related technologies. Deep experience in AWS. Experience with DevOps practices such as CI/CD, release governance, and monitoring techniques. Familiarity with modern technologies, design and development tools, and automation techniques. Experience with AWS cloud networking. Lean and agile ways of working. Familiarity with IT product management practices. Communication and networking skills in a global environment. Entry-Level Requirements: Educational qualifications (e.g., BE, BTech, MCA). At least 9-12 years of experience in developing and/or supporting IT solutions and platforms, preferably in relevant technology areas. Demonstrated experience working in a global context. We offer At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual and where we share actively ideas. Sustainability is an integral part of our culture and a daily practice. We are proud to offer a range of opportunities that will support you in achieving your career and personal goals and enable you to live a healthy and balanced life. We believe in improving performance through inspiring, engaging and developing our people. For additional information , please contact Surendra Rayudu email surendra.rayudu@kone.com Want to join the #PeopleFlow? If you think this could be your next inspiring challenge, please submit your CV and cover letter as soon as possible via our Careers-site www.kone.com/jobs but latest on May 26th, 2024. At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life. Read more on www.kone.com/careers

The Opportunity: As a Software Engineer, you will utilize superior knowledge and experience to perform highly complex product design, systems analysis, research, maintenance, troubleshooting and other programming activities. You will drive innovation for both team and product development. You are great at: Produce high quality code according to design specifications. Analyze, troubleshoot, and fix highly complex code defects. Propose creative solutions or alternatives balancing risk, complexity, and effort to meet requirements. Work across teams and functional roles to ensure interoperability among other products, including training and consultation. Participate in the software development process from design to release in an Agile Development Framework. What it Takes: Bachelors degree in Computer Science or related field 2+ years of product development experience In-depth knowledge of Angular (Angular 2+ preferred; AngularJS knowledge is a plus) Proficiency in JavaScript and TypeScript. Excellent knowledge of REST API Good hold on design patterns Fundamentally good programming and debugging skills. Strong hands-on experience with building enterprise applications Good experience in Server and Client-side technologies Contribute to the continual improvement of our agile development processes. Maintain up-to-date documentation on processes and code. Experience working with groups of people across several geographies. Excellent communication and time management skills

You will be working as a Character Concept Artist for a company that is at the forefront of virtual character platforms. Your role will involve blending imagination, character lore, and design specifications to create accurate character concepts for various projects. This includes developing thumbnail sketches, turn around sheets, and posed character illustrations that align with the artistic vision and narrative essence of design requirements. Your responsibilities will include creating visually compelling and original character concepts, producing rough sketches and detailed concept art to guide 3D modelers and animators, ensuring each character reflects distinct personalities and backstories, collaborating with art directors and other team members to refine characters, and ensuring that character concepts are functional for 3D modeling, animation, and integration into games or cinematics. As a successful candidate, you should have a Bachelor's degree in Fine Arts, Graphic Design, Illustration, or a related field. You should have a strong foundation in anatomy, perspective, composition, and color theory. Proficiency in digital painting software such as Photoshop, Procreate, or Illustrator is required. Familiarity with 3D modeling workflows is a plus. A passion for gaming, storytelling, and immersive entertainment is essential, along with the ability to adapt to changing project requirements and deadlines. You should be a strong team player capable of collaborating with individuals from diverse backgrounds. In return, you can expect hands-on experience in a growing and innovative field, mentorship from experienced professionals, a flexible work environment with opportunities for remote work, the potential for a full-time position post-internship, and an exciting opportunity to gain insight into the gaming and entertainment industries.,

Solution Design & Development: Design, develop, and implement SAP SAC solutions. Create data models, stories, and dashboards in SAC. Develop custom SAC applications using scripting and advanced analytics features. Data Integration & Management: Integrate SAC with various data sources including SAP HANA, BW, S/4HANA, and other external sources. Ensure data accuracy, consistency, and quality in SAC solutions. Stakeholder Collaboration: Work closely with business stakeholders to gather requirements and translate them into technical specifications. Collaborate with cross-functional teams to deliver end-to-end analytics solutions. Performance Optimization: Optimize SAC solutions for performance and scalability. Troubleshoot and resolve issues related to SAC solutions. Documentation & Training: Document SAC solutions, including data models, design specifications, and user manuals. Provide training and support to end-users and other team members. Proficiency in SAP SAC, including data modeling, story creation, and dashboard development. Strong understanding of SAC data connectivity options and integration with various data sources. Experience with SAP HANA, SAP BW, and S/4HANA. Proficient in SAC scripting and advanced analytics capabilities. Solid understanding of data visualization principles and best practices.

Position Name - : Instrumentation and Control Engineer for oil & gas industry - Pune Experience : 8 to 20 years Location : Pune Job Responsibilities Design and specification of field instrumentation, control valves, analysers, and safety systems (SIS). Develop and review key engineering deliverables: Instrument Index, I/O Lists, Loop Diagrams, Cable Schedules, Datasheets, and Control Narratives. Configure and integrate DCS, PLC, SCADA, and SIS systems Perform system architecture design for control and communication networks. Ensure compliance with Canadian engineering codes and international standards (ISA, CSA, NFPA, IEC, API). Coordinate with process, electrical, and mechanical disciplines to ensure integrated design. Review and approve vendor documents, FAT procedures, and test protocols. Provide technical support for procurement, installation, commissioning, and troubleshooting. Participate in HAZOP, SIL verification, and control system safety analysis. If interested please share cv on poonam@hrworksindia.com Regards, Poonam 9209078944

- Analyze tool design specifications and production requirements to create accurate cost estimates. - Collaborate with engineering teams to understand tooling requirements and assess potential costs. - Monitor tooling expenditures and compare them with budgets, providing reports on variances. - Conduct regular assessments of tooling processes to identify areas for cost reduction. - Prepare detailed cost reports and presentations for management review. - Participate in cross-functional teams to evaluate new tooling projects and their financial implications. - Maintain comprehensive records of all tooling costs and related documentation. Roles and Responsibilities Development of Costing in support of Technical Estimation and/or Should Cost based on technical features, specifications and Bill of Material Propose economic savings and optimization during Project milestones and cost target development. Directly input design cost saving ideas into Opportunity Portfolio System Support as an active cross-functional teammate to Engineering, Purchasing. Providing data driven cost deltas for target and quote gap closure. Help and Support Negotiation during Component RFQ, Change Notes, Project milestones Utilize cost database/calculators to develop and deliver cost analysis Support Purchasing/Engineering Commodity Strategies.

Job Characteristics: Leads software development projects through the phase gate process. Leads requirements gathering efforts of the software team to ensure that customer and divisional needs are met. Manages interactions between team & stakeholders to ensure seamless project integration. Writes code to address challenging aspects of the project. Writes the standard documentation used to translate project needs into software design specifications. Assists in creating overall architecture for various software systems. Corrects challenging defects found through QA software testing and systems testing. Supports field test personnel after development with issues not addressed by software engineers in lower levels. Often coaches and advises other engineers. May oversees external contractors and consultants. Assists in defining the process by which software is designed and developed. Activities ensure that software development projects progress properly, and result in quality software that meets customer and divisional expectations. Education: B Tech or equalient Skills : 8+ years of overall experience with at least 6+ years in Salesforce Marketing/Sales & Service technologies. Extensive knowledge of Data Cloud capabilities, including data ingestion, data modelling, segmentation, and activation . Experience with data ingestion pipelines and data transformation techniques. Strong understanding of data modelling principles and the ability to design and implement complex data models . Ability to troubleshoot and resolve issues related to Salesforce Data Cloud implementations. Experience with JavaScript , SSJS (server side), HTML, and CSS for customizations and integrations. Proficiency in Apex and LWC for customization and development within Salesforce. Strong knowledge of SQL for querying and manipulating data, AMPScript, REST/SOAP APIs, Platform Events . Deep understanding of website personalization using Marketing Cloud Personalization including sitemap development. Excellent analytical skills and ability to optimize campaigns for better performance. Ability to lead and mentor junior developers. Familiarity with SDLC methodologies including requirements, design, implementation, testing and maintenance. Strong communication and interpersonal skills , with the ability to collaborate effectively with both technical and non-technical stakeholders. Salesforce certifications preferred (e.g., Platform Developer I, II, App Builder, Data Cloud Consultant , Marketing Cloud Administrator, Marketing Cloud Personalization Specialist ) Independence Level/Reports to: Recognized master in professional discipline typically obtained through advanced education and work experience. Responsibilities typically include: establishing operational plans for job area. Developing and implementing new products, processes, standards or operational plans that will have impact on the achievement of functional results. Requires communication with leadership. Normally Reports to Sr. Leader or Director.

Job Characteristics: Leads software development projects through the phase gate process. Leads requirements gathering efforts of the software team to ensure that customer and divisional needs are met. Manages interactions between team & stakeholders to ensure seamless project integration. Writes code to address challenging aspects of the project. Writes the standard documentation used to translate project needs into software design specifications. Assists in creating overall architecture for various software systems. Corrects challenging defects found through QA software testing and systems testing. Supports field test personnel after development with issues not addressed by software engineers in lower levels. Often coaches and advises other engineers. May oversees external contractors and consultants. Assists in defining the process by which software is designed and developed. Activities ensure that software development projects progress properly, and result in quality software that meets customer and divisional expectations. Education/Work Experience: Typically requires a degree and 8+ years experience; or no degree and 12+ years combined education and equivalent work experience (typically 1 year experience = 1 year education). Independence Level/Reports to: Recognized master in professional discipline typically obtained through advanced education and work experience. Responsibilities typically include: establishing operational plans for job area. Developing and implementing new products, processes, standards or operational plans that will have impact on the achievement of functional results. Requires communication with leadership. Normally Reports to Sr. Leader or Director.

You are an experienced Structural Site Engineer with a strong background in the construction of bridges, flyovers, culverts, pedestrian underpasses (PUP), and vehicular underpasses (VUP) for highway projects. Your main responsibility will be overseeing structural works, ensuring compliance with design specifications, safety standards, and quality requirements. You will supervise and execute structural works for bridges, flyovers, culverts, PUPs, and VUPs in highway construction. Your role involves interpreting and implementing structural drawings, design specifications, and project plans on-site. Monitoring construction activities, materials, and workmanship to ensure compliance with engineering standards and project timelines is crucial. You must ensure adherence to safety regulations and environmental guidelines at the construction site. Additionally, managing structural modifications, technical challenges, and problem-solving related to site execution will be a part of your duties. It is also expected that you prepare and maintain daily progress reports, site records, and documentation for project tracking. To qualify for this position, you should have a Bachelor's degree in Civil Engineering or a related field and a minimum of 1 year of experience in the structural execution of highway projects involving bridges, flyovers, culverts, PUP, and VUP. Strong knowledge of structural design principles, construction techniques, and material specifications is required. Proficiency in AutoCAD, STAAD Pro, MS Project, and other civil engineering software is considered an advantage. Excellent problem-solving skills, leadership abilities, and teamwork are necessary to manage site challenges effectively. Strong communication skills are essential to liaise with multiple stakeholders. You should also be able to work in challenging site conditions and ensure timely project completion. This is a full-time job with the flexibility of working day shifts and rotational shifts. You must be able to commute or relocate to Vellore, Tamil Nadu, before starting work. Knowledge of Hindi, Tamil, and English languages is preferred. The work location is in person in Vellore, Tamil Nadu.,

We are looking for a dedicated Agricultural/Civil Engineer with at least 2 years of experience to join our team. The ideal candidate will be responsible for designing and implementing agricultural projects, such as irrigation systems, landscape management, and sustainable land use planning. Design and implement irrigation systems, landscape management, and soil conservation practices. Conduct site assessments to evaluate land suitability and environmental impact. Develop project plans and ensure they align with regulatory and sustainability standards. Oversee project execution, monitoring progress and quality control. Collaborate with clients, contractors, and internal teams to meet project goals and timelines. Prepare and review technical reports, documentation, and design specifications. Ensure compliance with safety and environmental guidelines throughout project phases. Conduct maintenance planning and troubleshoot issues in existing agricultural systems. Job Type: Full-time Education: Bachelor's (Preferred) Experience: civil engineer: 2 years (Required) Work Location: In person,

Line of Service Advisory Industry/Sector Not Applicable Specialism Operations Management Level Senior Associate Job Description & Summary At PwC, our people in business application consulting specialise in consulting services for a variety of business applications, helping clients optimise operational efficiency. These individuals analyse client needs, implement software solutions, and provide training and support for seamless integration and utilisation of business applications, enabling clients to achieve their strategic objectives. As a business application consulting generalist at PwC, you will provide consulting services for a wide range of business applications. You will leverage a broad understanding of various software solutions to assist clients in optimising operational efficiency through analysis, implementation, training, and support. Why PWC At PwC, you will be part of a vibrant community of solvers that leads with trust and creates distinctive outcomes forour clients and communities. This purpose-led and values-driven work, powered by technology in an environment that drives innovation, will enable you to make a tangible impact in the real world. We reward your contributions, support your wellbeing, and offer inclusive benefits, flexibility programmes and mentorship that will help you thrive in work and life. Together, we grow, learn, care, collaborate, and create a future of infinite experiences foreach other. Learn more about us. At PwC, we believe in providing equal employment opportunities, without any discrimination on the grounds of gender, ethnic background, age, disability, marital status, sexual orientation, pregnancy, gender identity or expression, religion or other beliefs, perceived differences and status protected by law. We strive to create an environment where each one of our people can bring their true selves and contribute to their personal growth and the firms growth. To enable this, we have zero tolerance for any discrimination and harassment based on the above considerations. Job Description & Summary: A career with PwC in Zoho practice for managing and leading projects on product strategy and implementation using Zoho Suite of Products Responsibilities: Expertise in working with Zoho suite of products Expertise in implementation of Zoho Suite of products CRM, Books, Creator, HRMS, Expense, Projects, Analytics, etc. Responsible for cloud deployment, programming workflows, enhancements including third party integration Creating & maintaining design specifications, architectural diagram & process diagram of Zoho Suite of products Consulting background is preferable Candidate should be able to configure policies and profiles for accessing enterprise resources Should have experience to integrate Zoho Suite of products Should have experience to build custom applications on Creator Knowledge on Zohos AI Designing and Advanced analytics for configuring reports and dashboards Excel knowledge & understanding of integrations with ZOHO products and other supporting technologies Good Insights on Agile Methodologies, Critical thinking, and ability to provide best market solutions to the clients Deluge Scripting is must & Zoho Certification will be an added advantage Responsible for gathering business requirements, consulting, and suggesting solutions proactively Client facing roles preferable Mandatory skill sets: Hands on experience of implementation, customization and integration of Zoho Suite of products such as: 1. CRM 2. Books 3. Creator 4. Projects 5. Analytics 6. Expense Preferred skill sets: Hands on experience on other Zoho products and native integrations on Zoho products Years of experience required: 3-8 Years of experience Education qualification: Graduate Engineer or Management Graduate Education (if blank, degree and/or field of study not specified) Degrees/Field of Study required: Master Degree, Bachelor Degree Degrees/Field of Study preferred: Certifications (if blank, certifications not specified) Required Skills Zoho Creator, Zoho CRM Optional Skills Accepting Feedback, Accepting Feedback, Active Listening, Analytical Reasoning, Analytical Thinking, Application Software, Business Data Analytics, Business Management, Business Technology, Business Transformation, Communication, Creativity, Documentation Development, Embracing Change, Emotional Regulation, Empathy, Implementation Research, Implementation Support, Implementing Technology, Inclusion, Intellectual Curiosity, Learning Agility, Optimism, Performance Assessment, Performance Management Software + 16 more Desired Languages (If blank, desired languages not specified) Travel Requirements Not Specified Available for Work Visa Sponsorship No Government Clearance Required No Job Posting End Date Show more Show less

About Habilelabs Habilelabs, headquartered in Pinkcity, is a forward-thinking IT company uniting over 150 designers and engineers across India. Specializing in software development, web and mobile app development, UI/UX design, cloud solutions, data analytics, and IT consulting, Habilelabs prides itself on a client-centric approach. The company delivers customized solutions that drive digital transformation and consistently exceed client expectations. The vibrant work environment at Habilelabs fosters creativity, teamwork, and continuous learning. Role Overview As a Product Owner at Habilelabs, you will be responsible for overseeing the product lifecycle from ideation to launch. With a minimum of 5 years of experience, you will leverage your expertise to define the product vision, create detailed roadmaps, and collaborate with cross-functional teams to deliver high-quality products that align with business objectives. You will play a pivotal role in translating business needs into actionable features while ensuring the product meets market demands. Key Responsibilities - Product Strategy & Vision: Define and communicate the product vision and roadmap, ensuring alignment with company goals and market needs. - Backlog Management: Prioritize and manage the product backlog, ensuring the development team has clear and actionable user stories. - Stakeholder Engagement: Collaborate with stakeholders, including customers, business leaders, and development teams, to gather requirements and validate solutions. - Feature Definition: Write clear and detailed product requirements, use cases, and user stories to guide the development process. - Release Planning: Plan and manage product releases, ensuring timely delivery of features and updates that align with the product roadmap. - Market & Competitive Analysis: Conduct thorough market research and competitive analysis to inform product decisions and identify new opportunities. - Performance Monitoring: Track product performance metrics, user feedback, and key performance indicators (KPIs) to assess product success and identify areas for improvement. - Sprint Planning & Execution: Collaborate with development teams to plan, execute, and review sprints, ensuring the delivery of high-quality features. - Risk Management: Identify potential risks in the product lifecycle and develop mitigation strategies to ensure smooth product delivery. - User Experience: Collaborate with UI/UX teams to ensure a seamless user experience that meets the needs of the target audience. Requirements - Minimum of 5 years of experience as a Product Owner or a similar role in product management. - Strong understanding of Agile methodologies; Certified Scrum Product Owner (CSPO) or Professional Scrum Product Owner (PSPO) certification is a plus. - Bachelor's degree in Business, Computer Science, Engineering, or a related field. Advanced degrees or additional certifications in product management are a plus. - Proven track record of delivering successful products from concept to launch. - Proficiency with product management and collaboration tools (e.g., JIRA, Trello, Confluence). - Experience with data-driven decision-making, including familiarity with analytics tools. - Excellent communication, negotiation, and leadership skills. - Strong problem-solving abilities and strategic thinking. - Commitment to continuous learning and staying updated with industry trends and best practices. Key Skills - People Management - Analytical Skills - Strategic Thinking - Wireframing & Prototyping - Scrum & Agile Development - Product Requirements & Roadmapping - Design Specifications - User Experience Design (UED) - Data Manipulation & Analysis - Market Research & Competitive Analysis - Risk Management - Performance Metrics & KPIs - Problem Solving & Critical Thinking - Communication & Negotiation Job Type: Full-time Benefits - Health insurance - Paid sick time - Provident Fund Schedule - Day shift Education - Bachelor's (Preferred) Experience - Product Owner: 5 years (Preferred) Work Location - In person,

An ideal candidate who can contribute to our fast-paced, hardworking team with efficient and innovative design solutions and brand architecture with high visual impact. You should be able to generate fresh ideas on your own as well as through collaboration with others to enhance creative direction. You will be responsible for the correct visual image/graphic use, interpreting the client's business needs, and developing a concept to suit their purpose. You will illustrate concepts by designing rough layouts of art and copy regarding arrangement, size, type size and style, and related aesthetic concepts. Working on layouts, implementing creative briefs into concept, design, and final artwork will be part of your role. You must develop high-quality creative advertising, HTMLs, digital banners, internal and external newsletters, brochures, packaging, display artworks, and presentations. Using a wide range of media, including photography and computer-aided design, you will ideate design concepts, experiences, and solutions. You will also develop and codify brand design systems into cohesive brand guidelines while consistently meeting deadlines and maintaining high-quality standards. Requirements: - A degree in graphic design is desired. - Proficiency in InDesign, Illustrator, and Photoshop, with the ability to work with a wide range of media. - Well-informed about emerging technologies in new media and proficient with Adobe CC Suite. - Think creatively to produce new ideas and concepts, with the ability to understand and translate business, technical, and functional requirements into design. - Self-motivated, enjoy working to targets, and be a strong team player while also capable of taking initiative. - Attention to detail, flexibility, graphic design skills, layout skills, and creative services are essential. - Excellent time management and organizational skills. - An understanding of the latest trends and their role within a commercial environment. You should possess strong design skills and expertise with a passion for simple, timeless design and meticulous attention to detail. All candidates must provide a web-based portfolio for consideration and should be capable of creating wireframes, mockups, and detailed design specifications to describe the user experience and user interface.,

As a Technical Drawing Specialist, your main responsibility will be to create detailed electrical drawings, schematics, and layouts using CAD software. You will collaborate with engineers and project managers to interpret design specifications and ensure that all designs comply with industry standards, codes, and regulations. Keeping accurate records of design changes and updates will be essential, along with providing technical guidance and support during project implementation phases. In this role, you will work closely with engineers, architects, and other stakeholders to ensure project success. It is important to stay current with industry standards and advancements in electrical drafting and design to excel in this position. This is a full-time role with a shift allowance. Are you experienced in Auto Cad & Electrical Layouts This position requires working in person at the designated work location.,

What do I need for the qualification of this job? M.Tech or BE/B.Tech (Mechanical) from any IIT / any NIT / any Engineering college in top 50 per MHRD list () with CGPA > 8.0 A minimum of 6 years of engineering experience in mechanical integrity evaluation, aerodynamics analysis, and manufacturing aspects related to steam turbine blade path calculations, specifically as a blading engineer a key assessment criterion. At least 4 years of engineering experience in turbomachinery, focusing on thermal and aerodynamic analysis, heat and mass balance, and performance and efficiency analysis, specifically as a thermodynamics engineer a key assessment criterion. A minimum of 1 year of engineering experience as a technical project lead, responsible for overseeing project execution in engineering, including planning management, providing technical guidance, engaging stakeholders, and ensuring compliance with quality and budget requirements. Relevant experience in providing support to tender calculations, determination of appropriate upgrade proposals. Familiarity with steam turbine products or repair methods for major components preferably blades, bladed casing, and bladed rotor. Excellent knowledge about blade manufacturing or similar components. Relevant experience of handling customer questions in design reviews. Team player, proactive and able to provide solution within short time with engineering judgment. Effective communication skills (verbal, written and listening), a strong sense of teamwork and customer focus. Key assessment point Exposure to SAP, Teamcenter and programming skills like python is a merit. What would be my responsibilities? Responsible for conducting aerodynamic analysis and performance evaluations of steam turbines in accordance with Siemens design guidelines. Accountable for aerodynamic design, thrust balancing in steam turbines, and efficiency assessments for Combined Cycle New Applications, modifications, and nuclear power plants. Collaborate closely with engineering teams in Germany and the Americas to fulfill customer requirements regarding functionality, performance, and timelines. Provide blading engineering expertise to the R&D team in Germany for product development and integration, while developing enhanced design methods and tools to improve competitiveness and product integrity. Offer blading engineering expertise to the tender/proposal team for steam turbine modernization projects in the Indian market. Support manufacturing and field operations by evaluating non-conformance reports and defining corrective measures and troubleshooting for manufacturing deviations and field issues. Review assembly drawings, detailed drawings, manufacturing sketches, layouts, inspection data, and bills of materials to ensure compliance with design specifications, following drawing/modeling, Teamcenter, and SAP guidelines. Lead the blading aspects of design reviews with global teams, interfacing with customers during review meetings and on-site visits to effectively represent Siemens, showcasing technical expertise and customer sensitivity to achieve high customer satisfaction. Prepare technical reports and other documentation, such as bulletins or design analysis reports, for use by engineering teams or customers. Provide guidance and direction to junior team members, developing training and development plans. Drive continuous improvement in processes and procedures within the skill area. Willingness and ability to travel to customer sites as business needs arise.

Your new role challenging and future-oriented Creation of drawings in 3D CAD Software (Preferred in NX and AutoCAD) Prepares and checks assembly drawings, detailed drawings, manufacturing sketches, layouts, inspection data and bill of materials per design specifications following drawing/ modeling, Team center & SAP guidelines Support design lead to evaluate non-conformance reports and defines further measures & Troubleshooting for manufacturing deviations and field issues. Communication within the engineering to define required hardware scope on a site specific basis within defined boundary conditions Performs studies to insure proper form, fit, and function of parts and/or assemblies We dont need superheroes, just super minds Mechanical engineering graduate/post-graduate with 1-5 years of experience in Steam turbine, Hydro turbine, Automobile or equivalent field. Excellent spatial sense and general design knowledge regarding cast and welded design Excellent knowledge about manufacturing specific design. Knowledge about additive manufacturing is beneficial. Excellent skills in NX and Auto CAD Software Advanced skills in MS-Office, SAP, Teamcenter Very good verbal, written and virtual communication skills Be comfortable working on different projects with colleagues in multiple time zones Demonstrated ability to support in multi-skilled professional teams. Ability to establish relationships, build networks in a global team setup. Familiarity with the Product Development Process (PDP) as well as six sigma and lean principles Excellent language proficiency in spoken and written English