1663 Design Engineering Jobs - Page 28

Role Summary Assistant Engineer in the iCRC Water & Wastewater Team. Develop wastewater hydraulic models in Infoworks ICM and detailed technical analysis associated with delivering projects for a variety of clients in the public and private sectors. The role would be ideally suited to a person with a passion for working in the field of Hydraulic Modelling. Previous experience in wastewater/gravity network modelling or design is essential. Seeking candidates who are enthusiastic, willing to learn, self-motivated and passionate about delivering quality projects. Responsibilities: Provide technical support on wastewater projects as part of the Canada iCRC project team. Support to development of Feasibility studies and optioneering. Use of network models to analyse Asset Performance. Model-building, Analysis and Design of Wastewater Network using Infoworks ICM. Preparation of Technical Reports and supporting maps in GIS. Undertake your own continuing professional development under guidance from your Line Manager. All employees shall familiarise themselves with our health and safety arrangements and guidance relevant to themselves and their activities and shall meet any specific duties for their role. Key Competencies / Skills: Mandatory Skills A Minimum of 3+ years of experience in wastewater/gravity systems hydraulic modelling, analysis or design . Hydraulics, Hydrology, Sewer Design, Storm Water Drainage, Wastewater, Hydraulic modelling and analysis, Arcgis, MS Office, Technical Writing, Design Analysis Candidate must have a strong understanding of hydrology and hydraulics concepts , preferably with exposure to Canadian Water Industry or any other International Projects. Experience in Master Planning Studies or Sewer Capacity Analysis is mandatory. Experience working with any of the hydrologic and hydraulic modelling softwares like Infoworks ICM, PCSWMM, HEC-HMS, HEC-RAS, SewerGems, ArcGIS or QGIS is mandatory . Good written and verbal communication skills in English are essential. Competent in MS Office. Bottom of Form Desired Skills Data Analysis, performing calculations and report writing Possess the ability to work on own initiative with minimal OR no supervision on technical matters.

To complete the assignment within budgeted manhours / cost with margin. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Mechanical services with the building layouts and other services. Ensure that the drawings are prepared within the productivity norms. Key Responsibilites - Ensure the accuracy and technical correctness of the design and co-ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the site team / main contractor as directed by the Project Manager. Proactive coordination with civil contractor / subcontractors for effective execution of works ensure that the quality of the work is in full compliance to the contract specification, project quality plan and is completed of time. Obtain drawing approval from the professional team. Maintaining ISO documentation, Record Keeping, Suppliers/Manufacturers Data Bank records. Delegating Draftsmen for quantity take offs, cross checking quantities. Issue the approved drawings to site. Maintain the working drawing register (Drawing Log) for the air conditioning drawings. Monitoring productivity and compiling relevant information on production rates. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Manager to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: o Water and air-cooled chiller plant. o Constant volume air handling plant. o Variable air volume air handling systems o Fan coil systems o Package and split systems o Supply and extract ventilation. o Smoke control systems. Understanding of the method of construction of buildings. Ability to communicate fluently in English - both orally and in writing Developed computer skills, particularly in spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Familiar with Plumbing / Fire Fighting as well as Electrical & ELV systems. Ability to read, understand, visualise and interpret drawings and specifications. Identify training needs of the project team members reporting him and arrange for suitable training for them, in consultation with P.M for furtherance of their professional skills and competence An active personality, able to interact freely with his peers Educations - Graduate in Mechanical engineering (B.E. / B.Tech) / Diploma in Mech engineering along with: Approved training in HVAC & related field Proficient in use of engineering calculations such as HAP Knowledge of BIM softwares such as Revit & Navisworks would be an advantage. Experience - 5 years engineering experience with at least 2 years for a Graduate Engineer OR 10 years engineering experience with at least 4 years for Diploma Engineer in the preparation of air-conditioning construction drawings. Minimum 2 years of experience in Site experience in installation / execution (Preferably in GCC countries) Knowledge of Electrical & Plumbing / Fire Fighting systems would be an advantage Hands on experience in Revit / Navisworks would be an advantage Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents within budgeted manhours / cost with margin. Knowledge of BIM softwares (Revit & Navisworks) as added advantage. Detailed knowledge of design and engineering of Medium, Low and Extra Low Electrical services for major High Rise Residential & commercial buildings.

One of our esteemed clients is looking for experienced, diligent, intelligent, engineers with demonstrated experience. Main Objective is to maintain design documentation as per the criterias; Manage Continuous Engineering Activity for Existing Products; Improve the Design and Performance of Existing Products. Roles & Responsibilities:- 1. Generating ideas for new products by researching and testing manufacturing and assembly processes and materials, as well as by examining client requirements and operator feedback. 2. Evaluate and address production difficulties, design optimization, and technological feasibility issues 3. Use simulation and analysis to improve the design by considering thermal, mechanism, and other factors. 4. Testing samples of various components to choose the best ones that meet the requirements of the new product brief 5. Establish and document part/product specifications and test procedures 6. Offer technical assistance and support for any product's industrialization efforts, including manufacturability, tooling, assembly process design, product cost, workflow, quality, and safety. 7. Design and modify machinery for fabricating, building, assembling, and installing components in order to develop and implement manufacturing/assembly processes. 8. Develop prototypes and complete functional testing. Fine Tune designs till they are ready for production 9. Work with other departments to execute design, technology, product development, and vendor strategy 10. Review, approve and / or modify product designs 11. Study, evaluate, and recommend process re-design 12. Assist in day-to-day process development to ensure product quality, timely product shipments, continuing cost effectiveness and profitability 13. Qualify and approve new products from new or existing vendors 14. Analysis & Rectification of errors related to product and its development like designing, quality, etc Required Skills: 1. Ability to work on own initiative 2. Ability to work under pressure and resolve problems and meet deadlines 3. Good organisational skills and ability to motivate a team 4. Excellent attention to detail and committed to providing exceptional service 5. Should possess excellent communication skills, convincing skills, interpersonal and listening skills, analytical skills. 6. Should be Innovative and Creative in thinking and problem solving. 7. Should possess adequate Business Acumen

Key Responsibility - Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the air conditioning drawings. Maintain the daily record of the work done including time sheet. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills- Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: Water and air-cooled chiller plant. Constant volume air handling plant. Variable air volume air handling systems Fan coil systems Package and split systems Supply and extract ventilation. Smoke control systems. Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting / 3D modeling packages, spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Ability to read, understand, visualise and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Mechanical engineering / ITI Full time Course along with: Approved training in Air Conditioning Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of air-conditioning construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries would be an advantage. Minimum 2 years of experience in Revit and 3D modelling Site experience in installation / execution would be an advantage. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents.Knowledge of BIM softwares such as Navisworks is must. Detailed engineering knowledge in the design and engineering of which include both ductwork and pipe work for the Air Conditioning systems.

Hi All, Currently we are hiring for Brakes design engineer for a Product, Kindly check below the job description attached below Design and Development of Pneumatic Brakes system for LCV Electric Vehicles Interface components Packaging and layout finalization Piping layout preparation. 2D & 3D preparation & release activities Should support on proto vehicle build / manufacturing issue root cause analysis of brake system associated components. ESSENTIAL/DESIRABLE REQUIREMENTS INCLUDING REQUIRED QUALIFICATIONS Essential Requirements: B.E or Diploma in Mechanical/Automobile Engineering Relevant Experience: 2 3 years in Automotive OEM or Tier 1 supplier handling hydraulic brake system. Experience in 3D, 2D, BOM preparation and release CAD Tool: CATIA V6 (2D & 3D) Basic knowledge in IS11852, ECE R13 regulations Desirable Requirements: Basic knowledge in Hydraulic brakes systems design & development activities

Role & responsibilities 1)Expertise in using BIM authoring tools, Revit and Revit content creation and Parametric families. 2) Strong Adherence to BIM Standards. 3) Creating and maintaining 3D models using BIM software, collaborating with architects, engineers, and other members of the design team, ensuring the models are accurate and meet project requirements, and using the models to identify and resolve conflicts or issues during the design phase. 4) Review of Comments from Client/s and incorporating the changes or corrections into design in coordination with the Project Managers. 5) Ability to Troubleshoot problems involving BIM and Autodesk Revit, Navisworks 6) Design Knowledge on ELV Systems vide., Structured Cabling System, CCTV and Access Control Systems, GRMS, Audio Visual systems preferable

Manage a 100+person Design Team servicing clients in the US market Strong leadership in operations, project delivery, client engagement, and business growth. Responsible for overall profitability, resource planning, and ensuring quality deliverables Required Candidate profile BTech in Civil Engineering with 20+ years of experience managing P&L for large design/engineering teams Strong understanding of design codes and project delivery practices in the international market

Role & responsibilities engineers required to enhance the overall production and quality for top most automobile unit Preferred candidate profile candidates who are belonging from Mechanical, Electrical can apply Perks and benefits

Roles and Responsibilities Engineer with experience in design and analysis of RCC & Steel Structures in a 3-D design environment in a Consulting / Engineering organization in Hydrocarbon / Petro-chemical / Oil & Gas sectors. Knowledge of applicable civil and structural design/ engineering standards covering and IS, ACI, AISC, UBC, ASCE, BS etc. Should be proficient in STAAD Pro for structural analysis and design. Basic knowledge of Tekla ,SP3D & Revit will be an added advantage. Should possess excellent communication skills and have ability to guide the work of job Engineers and Designers. Involvement in Development of Project specific Standard Drawings, Project planning, efforts-hours estimation, design and documents checking, auditing and Scheduling Activities would be added advantage. Desired Candidate Profile candidate with engineering consultancy back ground . Perks and Benefits Company transport will be available from Noida sector 18

Meinhardt Singapore India Office is urgently looking forward to having you join our team of world-class professionals. We have an opening for an experienced Electrical Design Engineer with minimum 10 years of relevant experience.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience • 10+ years of experience in relevant design discipline • Experience in engineering and package coordination Qualification • Postgraduate or graduate in an engineering discipline • Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning’s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Ensures Accountability Optimizes Work processes Plans and Aligns Decision Quality

About Us Purpose & Scope of Position Experience Qualification Key Responsibilities Competencies Ensures Accountability Instills Trust Persuades Manages Complexity Being Resilient

Experience in Automotive Axle, Driveline,Transmission & related assembly & component Design Engg, GD&T with knowledge of Teamcenter PLM. CAD knowledge is required for casting, forging, sheet metal components, and assemblies. CAD Software : UG-NX

As a Mechanical Design Manager, you will play a critical role in leading and overseeing the design and development of mechanical design, systems, components, and products within our organization. This role requires a deep understanding of mechanical engineering principles, strong leadership skills, and a proven track record of successfully managing complex design projects. You will collaborate with cross-functional teams, mentor junior engineers, implement Quality Assurance/Control activities and drive innovation in projects design. Project Leadership: Lead and manage a team of mechanical engineers, designers, and modelers. Set project goals, timelines, and priorities, and ensure successful project execution. Act as a technical mentor to team members, providing guidance and fostering skill development. Mechanical Design: Develop innovative mechanical designs for products, systems, and components. Utilize BIM/ Revit, CAD software (e.g., AutoCAD) to create detailed design drawings. Perform engineering calculations, simulations, and analysis to validate design concepts. Ensure designs comply with industry standards, safety regulations, and quality requirements. Design Optimization: Continuously seek opportunities to improve design efficiency, cost-effectiveness, and performance. Collaborate with cross-functional teams (electrical, architectural, structural, etc.) to integrate designs seamlessly. Implement Design for Constructability (DFC) principles. Implement sustainability and acoustic requirements in the developed design Testing and Commissioning: Perform/apply testing, commissioning and validation procedures / workflows. Analyze test results, identify issues, and iterate on design improvements as needed. Ensure designs meet performance, reliability, and durability specifications. Documentation and Reporting: Maintain comprehensive design documentation, including drawings, specifications, and reports. Provide regular project status updates to stakeholders and management. Prepare technical reports and presentations to communicate design concepts and outcomes. Collaboration: Collaborate with cross-functional teams to ensure seamless integration of mechanical designs into overall project development. Work closely with procurement to source materials, components and 3rd party services ensuring timely availability. Engage with external partners, suppliers, and vendors as needed. Regulatory Compliance: Stay informed about relevant industry standards and regulations. Ensure that designs adhere to all applicable safety and compliance requirements. QUALIFICATION, EXPERIENCE & SKILLS: Bachelor's or Masters degree in mechanical engineering or a related field. Proven experience (typically 15+ years) in mechanical design and engineering. Strong proficiency in CAD software (e.g., Revit, AutoCAD, BIM 360). Excellent problem-solving skills and a track record of innovation. Leadership and project management experience, with the ability to lead and motivate a team. Knowledge of construction processes and materials. Strong analytical and communication skills. Attention to detail and a commitment to quality. Familiarity with regulatory standards and compliance in relevant industries (if applicable).

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips- the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world- like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of"science and engineering to make possible"the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers."We empower our team to push the boundaries of what is possible"”while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Experience 4-5 years Key responsibilities will include: Creates and sustains OMSs for existing products Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies. Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products. Job Specific Knowledge: Requires demonstrated knowledge of manufacturing engineering discipline, theories, practices and principles. Requires knowledge necessary to perform the job function such as an understanding of the engineering change order process, DFx (Design for Excellence) engineering principles, product development process, value engineering, engineering specification waiver process, Producibility / manufacturability analysis, product structure, bill of materials, product safety requirements, material handling, and root cause analysis. Skills: Requires strong skills in Product technology, problem solving, communication skills, customer orientation, personal effectiveness, team skills, and quality. In depth knowledge of CAD tools ( UGNX , Creo, Creo Illustrate, Team center & CORE+ ), Familiar with SAP to study product and its disposition status & ECO is a must Requires additional knowledge of systems and software necessary such as Outlook, MS Word, Excel, PowerPoint Functional Knowledge Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities Business Expertise Understands key business drivers; uses this understanding to accomplish own work Leadership No supervisory responsibilities but provides informal guidance to team members Problem Solving Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents Impact Impacts quality of own work and the work of others on the team; works within guidelines and policies Interpersonal Skills Explains complex information to others in straightforward situations Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips- the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world- like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of"science and engineering to make possible"the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers."We empower our team to push the boundaries of what is possible"”while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Key Responsibilities Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies. Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products. Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality. Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities. Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions. Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented. Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required. Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development. Other : This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required. Functional Knowledge Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities Business Expertise Understands key business drivers; uses this understanding to accomplish own work Leadership No supervisory responsibilities but provides informal guidance to new team members Problem Solving Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents Impact Impacts quality of own work and the work of others on the team; works within guidelines and policies Interpersonal Skills Explains complex information to others in straightforward situations Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 20% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines Duties and Responsibilities Works under limited supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 3+ Years Experience in the similar field. Experience and proficiency inMicroStation and InRoads, OpenRoads, OpenRail, or other BIM Software (AutoCAD, Civil3D, Geopak, etc.) Engineer in Training Certification (EIT)

Duties and Responsibilities Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Develops and maintains electrical systems models, including power distribution, lighting, and low voltage systems. Collaborates with multi-disciplinary teams to ensure coordination between electrical and other building systems. Performs clash detection and resolution within the BIM environment. Generates accurate quantity take-offs and schedules from the BIM model. Ensures compliance with relevant codes, standards, and project specifications. Participates in project meetings and contributes to decision-making processes related to electrical design. Assists in the development and maintenance of company BIM standards and best practices. Troubleshoots and resolves technical issues related to electrical BIM models. Stays current with industry trends, new technologies, and software updates in electrical BIM. Mentors junior staff in electrical BIM practices and techniques. Contributes to the continuous improvement of electrical BIM workflows and processes. Prepares and delivers presentations on electrical BIM concepts to internal and external stakeholders as needed. Qualifications Required Qualifications: Bachelor's degree in Electrical Engineering, Architectural Engineering, or related field Minimum of 2 years of relevant work experience in electrical design or BIM Proficiency in Revit, AutoCAD, and Navisworks 4+ years of experience in electrical design and BIM Professional Engineer (PE) license or working towards licensure Expertise in both electrical and ELV (Extra Low Voltage) systems Advanced knowledge of Revit, AutoCAD, and Navisworks Experience with additional software such as Revizto and Microstation Familiarity with sustainable design principles and LEED certification processes Experience in clash detection and resolution within BIM environments Knowledge of construction methodologies and project delivery systems Demonstrated ability to mentor junior staff in electrical BIM practices Experience in creating and maintaining BIM standards and best practices Strong presentation skills for communicating technical concepts to various stakeholders Certifications in relevant BIM software or electrical design (e.g., Autodesk Certified Professional)

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Serves as lead engineer on mid- to large size projects. Provides specialized technical input to studies and design for staff's specific area of expertise. Approves and signs off on work. Provides technical expertise for studies and design efforts. Presents complex technical solutions to clients. Performs quality control reviews of work developed by others. Participates in development of technical proposals. Provides estimates for the engineering budget and schedule to meet requirements on large projects. Qualifications Master of Engineering degree in Power Systems / Energy Systems or equivalent educationfrom an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., IET UK) Overall 13+ years of work experience in consulting or design organization is preferable. Prior experience in performing Grid Connection related (PSSE / PSCAD / ETAP / Equivalent) dynamic or advanced power system studies is preferred. Experience in preparation of technical study reports for Renewable Energy Grid Connection works (Wind Farm / Solar PV / Hybrid / BESS / Other Equivalent) is required. Experience in building and leading technical experts of a specialist study team is desirable. Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is recommended. Working with OEMs of Wind Turbines, Solar PV modules for modelling of internal control loop systems is desirable. Very good communication skills (Oral and Written) in English language is mandatory.

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

AECOM EC is seeking for a candidate to be based in Bangalore or Gurgaon with the following skill sets : Good knowledge in Roads and understand the roads design terminology. Good in creating the Layouts, setting outs, cross-sections, Signs and Marking, understand Traffic signals, Pavement and Road furniture. Ability to extract the profiles, sections, setting out, grading etc., directly from the data shortcuts. Working knowledge in managing Civil3D data shortcuts in ProjectWise and BIM360 environments Ability to create templates and comply with project/client styles, line work, and naming conventions in both CAD and Civil3D. Understanding and implement AECOM Quality Assurance procedures Perform quality control, progress, scheduling and execution of product delivery to internal/external clients. Qualifications Diploma in Civil Engineering or Bachelor's in Civil Engineering followed by 2-5years of experience of CAD works in Roads, Highways, Major Infra projects using Auto CAD/MicroStation tool. Good Experience of using Auto CAD/MicroStation, added advantage having civil 3d tool for Road, infra projects and experience of 3D modelling tasks of Road features, assets. Preferably worked on Global design experience and worked for international projects in collaborative environment Highway related BIM exposure, Excellent spoken and written Communications skills, ability to explain and co-ordinate with teams for projects success Basic understanding of CDE tools ProjectWise, BIM 360, Bluebeam and other appropriate tools. Quality process, procedures, implementation for delivery of projects

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Knowledge Independently analyzes and applies solutions to challenging issues within the area of expertise by applying critical thinking Analyzes and applies solutions to atypical and/or challenging issues within the area of expertise using standard operating procedures/methodologies Engineering experience that provides knowledge and exposure to fundamental theories, principles and concepts Demonstrated experience using AutoCAD, Revit and Navisworks skills. Good written and verbal communication skills. Prepares project deliverables that are reviewed by senior team members Continues to grow knowledge of the organization, customers, and processes Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently.

Roles and responsibilities Create precise structural Revit models and CAD drawings for technically challenging projects. Develop plans, sections, elevations and details from Revit 3D model. Take ownership of modeling, drawings and documentation. Understand and implement industry wide BIM standards. Develop details and drawings from conceptual ideas and engineers sketches. Review model and drawings to ensure compliance with design. Highlight potential problems in time and look for a solution. Interact with engineers and clients to coordinate BIM models and drawings. Ensure accuracy and completeness of models and drawings prepared. Support the development of project documentation and drawing production. Participate in project meetings and provide technical support as needed. Update and maintain project notes and documentation. Ensure QA/QC documents are maintained properly. Works under general supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 2 to 6 years proven experience in Revit modeling. Excellent interpersonal skills with the ability to communicate with people of all levels. Proficient in written and verbal communication in English language and good command of technical English terminology. Experience in preparing 3D models of Bridges in Revit. Familiarity with AutoCAD and Navisworks. Must be experienced in ProjectWise, BIM 360/ACC. Basic understanding of construction and engineering principles. Must be self-motivated and able toworkindependently with minimum supervision. Must be willing to support the team in which they work. Must be proactive and should maintain professionalism. Accuracy attention to detail and correctness of drawings. Committed to delivering excellent levels of service. Knowledge Microsoft suite (Word, Excel, PowerPoint, etc.) Ability and flexibility to learn and develop technical/software skills. A flexible, positive approach and the ability to work as part of a team in a busy, creative atmosphere.

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 2-6years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory