1663 Design Engineering Jobs - Page 26

Burns & McDonnell India (BMI) Power Division is looking for a well-rounded and driven Electrical Power Systems Engineer in the Mumbai Office. The Power Division focuses on power generating facilities which offer a wide range of design and project execution experiences. Designs include the electrical interconnect to the bulk power grid and all associated power generating facility auxiliary power equipment. Equipment includes rotating machines, such as generators and motors, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, and variable frequency drives. The wide range of projects provide opportunities on both multi-discipline and electrical only projects. Multi-disciplined power generation projects require engineers to work in a diverse project team environment and exhibit the ability to develop consensus in identifying the optimum solution to complex problems. These complex assignments require the application of advanced techniques, resulting in the development of new or improved processes, equipment and/or technological methods. Position will require extensive interface with equipment suppliers/vendors, and with Burns & McDonnell project managers, other engineering disciplines, modelers, designers, and detailers locally in the Mumbai office as well as remotely in various offices in the United States. For an Electrical Engineer, following are some specific duties & responsibilities: Coordinating project design assignments with client and within teams Assist/develop Electrical system Power Systems modeling including grounding, load flow, short-circuit, and arc-flash analysis, using software like ETAP, SKM, Easypower, CDEGS, WinIGS etc Assist/develop protective relay setting development, calculation, and coordination studies, relay logics for microprocessor based relays Assist in developing reports and recommendations based on study results Assist in developing scope of work, conceptual design, and execution plans Assist in preparing engineering cost and man-hour estimates and schedules; Good understanding of electrical deliverables like one-line diagrams, three-line diagrams, schematics, interconnection drawings, equipment layouts, cable schedules, panel schedules, power, grounding layouts; Assist Lead Engineer in meeting and corresponding with clients or outside personnel. Travel to the United States as required and requested to support assignments on projects and overall office needs. - Work experience which demonstrates quick learning and ability to adapt to new processes and workflows. Has experience working in teams and collaborating with Engineers and Designers for developing detailed Electrical Engineering design deliverables. This position requires an individual capable of applying Engineering and analytical skills to broad areas of assignments. Must be capable of interpreting and developing solutions to assigned problems. Preferred skills and qualifications are: Bachelor’s degree in electrical engineering from accredited program. Minimum 1-5 years of related experience. Experience working on Power Systems Studies for either Industrial Facilities (Petrochemical plants, Fossil Fuel Power Generation Facilities, Mining & Metals, Other Heavy Industries), Renewable Facilities (Solar, Wind, BESS etc) shall be preferred. Experience of executing projects based on ANSI/NEMA, NFPA, NERC, IEEE, CSA and other international codes and standards; Software experience utilizing SKM Power Tools, ETAP, CDEGS or similar software is preferred. Excellent written & verbal communications as well as strong analytical & problem solving skills are required. Previous consulting engineering experience preferred.

Hydro Engineer 1. Domain of activities : Infrastructures related to hydropower plants / dams / power transmission lines 2. Typical projects for which the person would be mobilized : New infrastructures, rehabilitation / extension of existing infrastructures 3. Education (degree) / experience : Master degree in civil engineering, hydraulic design, 10 years of experience in the domain of activities. 4. Role / tasks of the person : '- Support the WSP Switzerland team in studies and design of hydro infrastructures such as dams / intakes / waterways / penstocks / powerplants / spillways / ... - Design phases : feasibility study, preliminary design / detailed design / tender documents / execution - Liaise / coordinate on a daily basis with the WSP Switzerland team. 5. Required skills / tools (specific softwares) : '- Good knowledge and experience of international design codes such as Eurocodes - Hydraulic design, head losses etc. - Good communication skills - Team work - Experience in working with countries oustide India. - Microsoft tools. - Advantage : Softwares HEC-RAS, FLUENT

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position Engineering Manager (EM) is responsible for engineering and design matters on the project and assists the project manager. An EM will fill 3 main roles during the execution of a project. These are Manager, Technical Leader and Communicator. The EM on a project is responsible for scope definition and manages the planning, resourcing and scheduling all the engineering related activities. In addition, the EM provides technical leadership, integrates the disciplines and resolves issues. The EM is responsible for delivery of all the technical deliverables to achieve the project objectives within the specified time frame and budget. Experience • Typically 15 years & above of experience in a multi-disciplinary environment on major projects Design and procurement activities related to electrical systems / equipment. Sizing calculations for all major electrical equipment or systems. Preparation of RFQs for major electrical packages Vendor print review for all electrical equipment or systems along with cable schedules & interconnection wiring diagrams Exposure on Layouts such as General Arrangement drawings, Cable & conduit drawings, Earthing & Lightning Protection drawings, Lighting drawings. Exposure on Control and protection, review of schematics for EHV, MV & LV systems. Exposure to Load flow, Short circuit, Largest Motor starting studies using ETAP. Estimation of BOQs for cabling, earthing, lightning & lighting systems. Exposure to relay setting and co-ordination Inspection services for major electrical equipment (Optional) Familiarity in ETAP, DIALux, AutoGrid Pro, etc. Familiarity in 3D Engineering tools Aveva E3D, Hexagon Smart 3D, Navisworks Qualification • Postgraduate or graduate in an engineering discipline • Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1.Ensure the scope of work is developed and effective change management system is in place 2. Provide input into the monthly progress report with respect to design progress and issues of concern and recommended changes if required to achieve overall objectives 3. Contribute to the development of the project execution plan together with the project leadership team and allocate roles and responsibilities 4. Make Contact with client management at key milestones / tollgates throughout project to ensure that engineering deliverables are meeting client requirements. 5. Direct and review the engineering activities to ensure that the work quality is satisfactory and appropriate technical personnel development programs are conducted 6. Involve specialist expertise from within TCE or externally as necessary. work with Technology Organization and DHs for mandatory reviews 7. Raise safety awareness and ensure the design for safety principles are applied to the projects 8. Ensure Engineering risk assessments are carried out and all identified issues are addressed 9. Arrange and facilitate design reviews and participate as required in engineering and management reviews 10. Co-ordinate quality audit verifications to ensure compliance with all relevant engineering standards and internal procedures for all design activities. Instigate corrective actions as required. 11. Cooperate with the TCE engineering practice of other BU’s as directed on matters involving sharing of available expertise. 12. Responsible to ensure timely availability of inter-disciplinary data, integration of the same and resolution of any issues and challenges 13. Obtain regular feedback from customer and take appropriate action 14. Document value additions and best practices and ensure communication of the same to other project teams and leadership 15. Recommend rewards and recognition for exemplary performance from project resources Competencies Manages Conflict Self-Development Drives Results Ensures Accountability Optimizes Work processes Plans and Aligns Decision Quality Situational Adaptability Tech Savvy Interpersonal Savvy

Lead a cross-functional design & development team to deliver new products .Drive creative innovation while ensuring client needs & manufacturability are prioritized. Implement & manage improvement by identifying & addressing process deficiencies Required Candidate profile Oversee multiple major projects requiring advanced tech solutions. Responsible for Testing, validation & product endurance, collaborate with external agencies on compliance.

New product design & analysis using 3D software Creo(Pro-e) Assess the usability, environmental impact &safety of design Using computer-aided design (CAD) & computer-assisted engineering (CAE) software to create prototypes.

Create,modify & analyze 2D/3D CAD models using SolidWorks,AutoCAD or similar software. Develop & test prototypes to evaluate design feasibility,structural integrity,performance. Prepare & maintain comprehensive design documentation. Required Candidate profile Conduct load,fatigue analysis using ANSYS software,particularly for modified crane structures and other heavy-duty applications. Knowledge of manufacturing industry & quality standards. MS Office

Role & responsibilities Create and modify 3D models, 2D drawings, and BOMs using SolidWorks, AutoCAD, and Inventor Assist in designing mechanical structures and hydraulic systems as per project requirements Ensure accuracy in drafting and detailing with adherence to GD&T standards Perform basic engineering calculations to support design decisions Collaborate with the team to redesign and optimize existing components Work closely with manufacturing and assembly teams to ensure design feasibility Preferred candidate profile Good understanding of mechanical design, and engineering principles. Proficiency in CAD software, Must have expert knowledge in Inventor Strong knowledge of Sheet metal design using DFM standards. Strong understanding of mechanical engineering principles, including kinematics and material science Familiarity with design for manufacturing (DFM) and design for assembly (DFA) Principle Strong communication and interpersonal skills, with the ability to work effectively in a collaberative environment Ability to manage multiple projects simultaneously and prioritize tasks to meet deadlines.

Responsibilities are Mechanical Design Leadership, Regulations such as ASME, AWWA, and local building codes, Technical Analysis and Problem Solving ,Mentorship and Development, Quality Assurance and Compliance, Construction and Commissioning Support Required Candidate profile Strong technical expertise in the design of mechanical systems for water and wastewater treatment facilities Expertise in piping, hydraulic, fabrication and rotary equipment's Preferred WTP Industry!

Major Role and Responsibility: Candidate shall have worked on Detail Engineering of AIS and GIS Substation/Switchyard (66 kV, 132 kV, 220 kV). 400 kV and higher voltage shall be added advantage. Candidate should be aware on CEA, CBIP, IS, IEC, NEC and NFPA guidelines. Candidate should have CTU (PGCIL), STU (GETCO, MSETCL, RJVNPL, KPTCL, UPPTCL etc.) requirement. Candidate should have worked on key SLD, metering & protection SLD, substation plan and elevation, erection key diagram, clearance diagram etc. layout. Candidate should have worked on earthing system design in accordance with IEEE 80 standard. Candidate have experience on working ETAP, CDEGS or equivalent software would be preferred. Candidate should have worked on DSLP (direct storke lightning protection) and lightning risk assessment in line with IEEE 998, Dr. Rezvig Method, IEC 62305 method. Candidate should have worked on auxiliary transformer sizing, DG sizing, battery and battery charger sizing, UPS sizing. Candidate should have knowledge of Protection coordination studies for Switchyard. Candidate should have worked on cable schedule, cable sizing calculation, interconnection schedule. Candidate should have experience of technical procurement support management including technical specifications, offer review, technical bid analysis, vendor document review. Candidate have worked on Owners Engineering on Substation projects shall be added advantage. Candidate have working experience on Solar PV Plant, wind farm, BESS, green hydrogen facility design shall be added advantage. Candidate should have worked on auxiliary power system SLD, load list preparations on Substation. Candidate should have worked on main control room building equipment plan, cable trench layout, earthing layout, lightning protection etc. aspect. Additional Skills Candidate should have BE- Electrical or ME- Electrical degree. Good communication skills. Project Management Skills.

Department: Power Electronics / EDU Development Position Summary:We are seeking a skilled Inverter Mechanical Design Engineer to support the concept and M1 d esign phases of P4 EDU inverters for a next-generation PHEV platform. This role will focus on the mechanical integration and internal layout of high-voltage inverters, collaborating with cross-functional teams to ensure high-quality designs that meet performance, safety, and manufacturability targets. Key Responsibilities:Mechanical Design & Packaging Support concept and M1 phase mechanical design for inverters integrated into P4 EDU systems. Define internal inverter layout inc luding placement of components such as busbars, capacitors, and cooling structures. Perform layout and packaging design using Siem ens NX and Teamcenter.Engineering Calculations & First-Principles Design

Core Responsibilities Proposal & Tender Management Preparing Techno-Commercial proposals / Tenders. Technical Design & Support Preparation of Auto-CAD Drawings. Extend any technical support required during order execution. Visit site to gather technical data, customer presentation. Design & Engineering new products / applications in cooling / Humidification applications. Knowledge about Heating / Cooling / Psychometric calculations. Design / suggest improvements into existing products with all necessary technical inputs. Desired Candidate Profile Gender & Age: Male/Female, Age: 25 to 40 years. Software Proficiency: Should be well versed with AutoCAD & MS Office (Word, Excel, Power Point etc.). Industry Experience: Candidate worked with Engineering Co. will be preferred. AutoCAD Versions: Should be conversant with operating recent versions of AutoCAD. Tendering Process: Should be conversant with tendering Process. Techno-Commercial Offers: Should have experience & direct exposure in preparing Techno-commercial offers. HVAC Background: Candidates who have done HVAC course, worked in field of AHU / Cooling towers shall be preferred.

JOB BRIEF This position requires the ability to work efficiently under minimal supervision, exercising initiative and independent judgment in the performance of assigned tasks and assisting in the Product engineering- Product design, Weldment Structures frame, Sheet metal modelling and Jigs & Fixtures. This position reports directly to the Engineering Manager and will also work in cooperation with the sales and marketing managers, as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use Solidworks to generate 3D modelling and detailing of any Mechanical products Weldments, Sheet metals. Responsible Jig and Fixture design development. Responsible for product design and development with applicable codes & standards. Responsible for preparing GA drawing and Fabrication drawing with BOM. Attention to detail and commitment to quality a must in reviewing, checking and clash checking other designer’s work. Prepare material take-offs for cost estimates and material procurement during concept and basis of design phases. Work with domestic and international teams to develop and support products. Update engineering manager with regular reporting of progress and status. REQUIREMENTS AND SKILLS Bachelor’s in Mechanical/Aeronautical engineering with 7+ years of experience. Extensive experience with Solidworks is MUST. Hands on experience in 3D modelling of Weldments, Sheet metals is must. Knowledgeable in Autodesk Inventor. Exposure to international codes and standards. Strong attention to detail Works independently and with minimal supervision Experience from Design engineering firms, preferred. Excellent organizational and communication skills is must. Proficient in Microsoft Office software

We are looking for a Design/Facade Engineer with 8–10 years of experience, strong in AutoCAD. Should independently handle complex detailing, delegate tasks, be financially driven, stable, and innovative.

Able to understand Japanese drawings, convert to Indian standards. Selection of Machine tool standard components (E.g. Seals, Fasteners, Bearings, pneumatic components, Pipe fittings, etc.) Should know Surface finish & welding symboly Required Candidate profile 2+ yrs in AutoCAD for BE (Mechanical or Production) 4 + yrs in AutoCAD for Diploma. (Mechanical). SPM and Machine building mandatory skill Kindly reach us @ Hema 7305057834 adducoindia@gmail.com

Zensar Technologies is looking for Project Manager Project Manager to join our dynamic team and embark on a rewarding career journey Developing project plans, including defining project scope, goals, deliverables, and schedules Assembling and managing project teams, assigning tasks and responsibilities, and monitoring progress Coordinating internal and external resources to ensure project success Managing project budgets and finances, and ensuring that all project costs are controlled and recorded Communicating project status to stakeholders, including project team members, sponsors, and senior management Managing and resolving project issues and risks, and escalating as necessary Ensuring that all project deliverables are completed on time, within scope, and to the required quality standards Continuously monitoring and evaluating project progress and making adjustments as necessary to ensure project success Developing and maintaining positive relationships with stakeholders, including project team members, sponsors, and suppliers

Zensar Technologies is looking for AI/ML TESTING-AI, ML, DEEP LEARNING, DATA MINING, ANALYTICS AI/ML TESTING-AI, ML, DEEP LEARNING, DATA MINING, ANALYTICS to join our dynamic team and embark on a rewarding career journey Develops and executes test plans for AI and machine learning models Validates model accuracy, fairness, performance, and edge-case behavior Implements automation tools and creates synthetic test datasets Ensures compliance with model validation protocols and documentation

Zensar Technologies is looking for DATABASES-Architecture & Design-Oracle DATABASES-Architecture & Design-Oracle to join our dynamic team and embark on a rewarding career journey Designs and maintains robust Oracle database systems and architectures Ensures data integrity, performance tuning, and backup/recovery processes Collaborates with development teams for optimized schema and queries Leads capacity planning and database upgrade initiatives

Job Title: Design Engineer Location: Bakrol GIDC, Gujarat Experience Required: 1 to 2 Year Qualification: Diploma or BE in Mechanical Engineering Industry: Engineering / Manufacturing / Precision Components Job Summary: We are looking for a technically sound and creative Design Engineer to join our engineering team. The ideal candidate will be responsible for creating 2D and 3D component designs, preparing technical drawings, and supporting the production team with design-related documentation. Key Responsibilities: Develop and modify 2D/3D models of mechanical components using CAD software (AutoCAD, SolidWorks, etc.) Interpret and create detailed engineering drawings as per industry standards Assist in new product development and design optimization Collaborate with production and quality teams to ensure manufacturability of designs Maintain drawing files, design records, and documentation Participate in design reviews and suggest improvements for performance and cost-effectiveness Ensure adherence to design specifications, tolerances, and customer requirements Required Skills: Proficiency in AutoCAD and SolidWorks (or other CAD software) Strong understanding of mechanical drawing and GD&T (Geometric Dimensioning and Tolerancing) Knowledge of materials, machining processes, and fits/tolerances Basic knowledge of manufacturing methods (turning, milling, etc.) Analytical thinking and attention to detail Good communication and documentation skills Eligibility Criteria: Diploma or BE in Mechanical Engineering 1 to 2 year of relevant design experience Willing to work at Bakrol GIDC, Gujarat

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience • 1-4 years of experience in relevant design discipline • Experience in engineering packages Qualification • Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Whats this role about? We are looking for a versatile and detail-oriented Content Writer with 3 years of experience to create high-impact content tailored for a technology-focused organization. The ideal candidate should be skilled at simplifying complex information, collaborating with cross-functional teams, and producing clear, engaging content for both technical and non-technical audiences. Heres how youll contribute: Youll do this by: Develop and edit a wide range of content including internal communication (emailers, newsletters, blurbs), SharePoint site content, product descriptions, process descriptions and application feature explainers. Collaborate with product owners, SMEs, UX teams, and other stakeholders to understand content requirements and transform them into user-friendly deliverables. Simplify technical or process-heavy content for diverse audiences including business users, technical teams, and clients. Review and format content for consistency in tone, clarity, grammar, and visual alignment with brand and communication guidelines. Support data mapping and information structuring efforts by identifying key messages and presenting data in clear, meaningful, and summarized formats (e.g., dashboards, quick facts, comparison tables, feature highlights). Conduct self-reviews and peer reviews to maintain content quality and accuracy. Manage content drafts and feedback cycles across teams, ensuring timely updates and delivery. Apply AI tools and prompts where appropriate to enhance productivity and content ideation. Core Skills: Strong written and verbal communication skills with the ability to adjust tone and complexity based on the audience. Experience in writing for technology solutions, products, or applications (hands-on exposure in tech domains is a plus). Good understanding of internal communication channels, especially SharePoint and email campaigns. Ability to grasp new tools and processes quickly and translate them into concise, easy-to-understand content. Proficiency in MS Office Suite (Word, PowerPoint, Outlook); familiarity with SharePoint content editing is a plus. Basic understanding of AI prompting and ability to use AI tools to enhance content. Detail-oriented with strong skills in editing, formatting, and organizing content logically. Comfortable working in a fast-paced environment with multiple priorities. Qualification: Bachelor s degree in English, Mass Communication, Journalism, Technical Writing, or related field. 3 years of content writing experience, ideally in a technology or enterprise environment. Portfolio or writing samples demonstrating experience with business or product-related content is preferred. . Whats this role about? We are looking for a versatile and detail-oriented Content Writer with 3 years of experience to create high-impact content tailored for a technology-focused organization. The ideal candidate should be skilled at simplifying complex information, collaborating with cross-functional teams, and producing clear, engaging content for both technical and non-technical audiences. Heres how youll contribute: Youll do this by: Develop and edit a wide range of content including internal communication (emailers, newsletters, blurbs), SharePoint site content, product descriptions, process descriptions and application feature explainers. Collaborate with product owners, SMEs, UX teams, and other stakeholders to understand content requirements and transform them into user-friendly deliverables. Simplify technical or process-heavy content for diverse audiences including business users, technical teams, and clients. Review and format content for consistency in tone, clarity, grammar, and visual alignment with brand and communication guidelines. Support data mapping and information structuring efforts by identifying key messages and presenting data in clear, meaningful, and summarized formats (e.g., dashboards, quick facts, comparison tables, feature highlights). Conduct self-reviews and peer reviews to maintain content quality and accuracy. Manage content drafts and feedback cycles across teams, ensuring timely updates and delivery. Apply AI tools and prompts where appropriate to enhance productivity and content ideation. Core Skills: Strong written and verbal communication skills with the ability to adjust tone and complexity based on the audience. Experience in writing for technology solutions, products, or applications (hands-on exposure in tech domains is a plus). Good understanding of internal communication channels, especially SharePoint and email campaigns. Ability to grasp new tools and processes quickly and translate them into concise, easy-to-understand content. Proficiency in MS Office Suite (Word, PowerPoint, Outlook); familiarity with SharePoint content editing is a plus. Basic understanding of AI prompting and ability to use AI tools to enhance content. Detail-oriented with strong skills in editing, formatting, and organizing content logically. Comfortable working in a fast-paced environment with multiple priorities. Qualification: Bachelor s degree in English, Mass Communication, Journalism, Technical Writing, or related field. 3 years of content writing experience, ideally in a technology or enterprise environment. Portfolio or writing samples demonstrating experience with business or product-related content is preferred. .

Role & responsibilities Job Summary: We are looking for a highly skilled and motivated Design Engineer with experience in the switchgear industry and hands-on proficiency in Creo software. The ideal candidate should possess strong design capabilities, relevant industry exposure, and good communication skills to collaborate effectively with cross-functional teams and clients. Key Responsibilities: • Design and develop switchgear components and assemblies using Creo (3D CAD software) • Collaborate with the product development, testing, and manufacturing teams to ensure design feasibility and functionality • Prepare detailed drawings, BOMs, and technical documentation • Ensure designs comply with relevant standards and customer specifications • Participate in design reviews and implement feedback • Support prototype development and testing • Coordinate with suppliers and vendors for component design alignment • Contribute to continuous improvement in product design and development processes Requirements: • Bachelors degree in mechanical engineering • 3 to 6 years of design engineering experience in the switchgear industry • Proficiency in Creo (3D modeling, assemblies, and drawings) • Good understanding of electrical systems and switchgear components • Excellent verbal and written communication skills in English • Ability to work independently and as part of a team • Problem-solving attitude and attention to detail

The Big Picture: The PV Design Engineer will provide Solar PV, C&I, Utility or substation design engineering support throughout the design phase of the project. What you ll do: Youll generate Photovoltaic designs using AutoCAD, including site plans, property plans, array layouts, electrical single and three-line drawings, and equipment elevations. Must Haves: 12-18 months of Design experience in any industry and preferably from ELECTRICAL academic is great to have. Ability to learn and adapt to new concepts/ systems quickly. Ability to handle multiple tasks and meet deadlines. Comfortable working in a fast-moving dynamic environment Ability to work under minimal supervision and resolve issues independently based on project/company standards. Great to Have: Experience or certification in AutoCAD, PVSyst, and or other cad-based software platforms would be a plus. Experience in 2D drafting / 3D modeling software would be a great fit. Skill Sets we require: Critical thinker and problem-solver Good time-management skills Great interpersonal and communication skills. Ability to Meet Deadlines Proven ability to handle multiple projects simultaneously, with an eye for prioritization.

Responsibilities for Design Engineer Analyze current engineering methods used within the company and develop steps and processes to improve Document and monitor requirements needed to institute proposed updates in relation to customer experience Establish a framework for necessary contributions from various departments and facilitate their collaboration Work alongside project management teams to successfully monitor progress and implementation of engineering initiatives Assist other department engineers in creating practical demonstrations of proposed solutions and creating them for other members of the team Account for possible project challenges or constraints and proactively seek to manage challenges Provide detailed specifications for proposed solutions including time and scope involved Define clear goals for all aspects of a project and develop steps for their proper execution Qualifications for Design Engineer Experience developing product design and manufacturing Project development and leadership skills are essential Masters degree in Manufacturing Engineering or Design Engineering preferred Up to date understanding of best practices regarding system security measures Advanced understanding of business analysis techniques and processes Experience with software engineering, customer experience and design architecture Ability to work with various departments to facilitate the orderly execution of a proposed project plan Extensive knowledge and experience working with various operating systems Professional work experience reviewing and analyzing prototypes and product modifications

Bachelor s or master s degree in electrical engineering, Electronics Engineering, Avionics or a related field. Minimum 2-5 years of experience in the aviation/aerospace industry. Proficient in avionics systems, electrical design, and simulation tools (e.g., MATLAB, Altium, or similar). Strong understanding of EMI/EMC standards, wire harness design, and power dis tribution. Experience with RTCA/DO-160 and related environmental testing processes. Excellent analytical, problem-solving, and communication skills. Experience in working with aerospace industry standards and codes. Good knowledge of aerospace standard such as DO160,DO178,DO254,ARP4761,ARP4754 Good knowledge of Hardware and software integration and testing. Knowledge of LRU and Component Level testing and troubleshooting. Awareness of Component Engineering Activities - Datasheet, HW Component Data collection Knowledge of Avionics Hardware and Automated test Equipment testing

We are looking for a highly skilled and experienced Senior Teamcenter Solutions Engineer to join our team. The ideal candidate will be responsible for a wide range of tasks, including blueprinting, development, integration, infrastructure setup, and support for Teamcenter solutions. Key Responsibilities: Map current practices to Teamcenter capabilities to ensure seamless integration and opti mization. Develop comprehensive Teamcenter Libraries solutions for Mechanical, Electronics, Material, and Document management. I ntegrate Teamcenter with Orcad CIS using Electronic Design Automation (EDA) tools. Set up infrastructure for EDA, including Teamce nter classification, attribute mapping, SQLLiteDB, and PTF files to support Orcad CIS and Design Entry HDL. Create and manage sche matics, PCBs, and their variants within Teamcenter. Implement and manage Teamcenter Integrated Material Management (IMM) solutions . Set up IMM for various versions of Catia (R22, R26, R28, R29, R30, R32). Collaborate with migration teams to migrate CIMDB and SMDB into Teamcenter. Design and implement the Teamcenter release process to transfer data to SAP. Provide Hypercare, AMS suppo rt, and manage change requests to ensure continuous improvement and support. Manage Teamcenter infrastructure, including installat ion, administration, and configuration for TcUA (11.5, 10.1) and TcE (9.0 MP03 DN Package 9.35). Setup of Teamcenter, License Serv er, Workgroups, FSC, Corporate and Web servers. Manage Citrix Environment, DFS, Firewall, User accounts, and local TC client in Us er Machines. Complete DR Setup, conduct patching and upgrade from 10.1 to 11.5. Work on BMIDE development, MKS Codeless Customiz ation deployment strategies, and dispatcher servers for custom translators. Conduct CAD integrations like TcIC and NX integration. Continuously monitor Teamcenter Server Environments with services in SCOM and Custom s, increasing system availability to 99 .6%. Work on Software Configuration Management Tools like SVN. Achieve excellent knowledge and experience on Linux Servers. Cl one PROD into Dev Environment. Deploy Teamcenter Code into DEV (BMIDE, DLLs, Workflows, Preferences, Stylesheets, JARs). Deliver code to PROD Systems, upgrade from Tc9.1 to Tc10.1 Version. Set up Teamcenter Multisite. Integrate Teamcenter Unified with CAD Tools like CATIA and NX. Generate high-quality test results with a minimum turnaround time. Execute Installation of JBoss and To mcat. Work on automation using Windows Scheduler and Linux Cronjobs. Create and compare BOM, BOP, and Collaboration Context. Sequence operations, processes, and manage time effectively. Manage tracking release, backlogs, and defects during each release. Consistently work in partnership with Teamcenter Developers, Oracle DBAs, and Support Teams. Qualifications: Proven experience wit h Teamcenter and its various modules. Familiarity with Catia and its integration with Teamcenter. Excellent collaboration and co mmunication skills. Ability to manage multiple tasks and projects simultaneously. Preferred Skills: Experience with SAP integration. Knowledge of material management and library solutions. Strong problem-solving skills and attention to detail.