130 Dcs Operation Jobs - Page 2

Role & responsibilities: Plan and coordinate production schedule on daily basis to produce high quality products Establish safety procedures and environmental regulations for employees Provide support for production and maintenance activities to ensure highest level of output Evaluate current production activities and make recommendations for improvements Implement cost reduction initiatives while maintaining high quality standards Preferred candidate profile: Specify required role expertise, previous job experience, or relevant certifications.

Role & responsibilities Responsible for day-to-day production activities and reports to Shift In-charge Production. Take the guidance from the supervisors and other operating personnel to carry out the production activities effectively as per the standard operating procedures. Responsible for maintaining all documents related to production. Indenting and receiving of raw materials / packing materials from stores as per requirement and same shall be checked while receiving raw materials / packing materials. Responsible for good housekeeping and keeping the production area in an orderly manner. Pack the intermediates / APIs as per customer requirements and transfer through prescribed formats. To raise the engineering requisitions related to production equipment breakdowns and preventive maintenance and co-ordinates with maintenance personnel to complete the jobs effectively. Reporting of all deviations to immediate supervisor Production. Responsible for conducting operations towards achieving 100% DDP, as per the given production plan. Responsible for conducting operations towards ensuring 100% compliance to the norms of cGMP, ISO-14001, and OHSAS-18001. Responsible for carrying out the needs of training as per him job role to ensure the adequate awareness in all of them towards the above requirements. Responsible for checking the completed BMSs for their appropriateness before submitting to QA. Review of all the filled production batch manufacturing sheets and related records ensuring that all the data is correct, complete, and signed. Should have Hands on experience with working on DCS plant operations. Suitable candidates may share your CVs to grabhilash@neulandlabs.com

Role & responsibilities Responsible for day-to-day production activities and reports to Shift In-charge Production. Take the guidance from the supervisors and other operating personnel to carry out the production activities effectively as per the standard operating procedures. Responsible for maintaining all documents related to production. Indenting and receiving of raw materials / packing materials from stores as per requirement and same shall be checked while receiving raw materials / packing materials. Responsible for good housekeeping and keeping the production area in an orderly manner. Pack the intermediates / APIs as per customer requirements and transfer through prescribed formats. To raise the engineering requisitions related to production equipment breakdowns and preventive maintenance and co-ordinates with maintenance personnel to complete the jobs effectively. Reporting of all deviations to immediate supervisor Production. Responsible for conducting operations towards achieving 100% DDP, as per the given production plan. Responsible for conducting operations towards ensuring 100% compliance to the norms of cGMP, ISO-14001, and OHSAS-18001. Responsible for carrying out the needs of training as per him job role to ensure the adequate awareness in all of them towards the above requirements. Responsible for checking the completed BMSs for their appropriateness before submitting to QA. Review of all the filled production batch manufacturing sheets and related records ensuring that all the data is correct, complete, and signed. Should have Hands on experience with working on DCS plant operations. Suitable candidates may share your CVs to grabhilash@neulandlabs.com

About The Role Skill required: Financial Planning & Analysis - Financial Planning and Analysis (FP&A) Designation: Finance Process & Ops Specialist Qualifications: BCom Years of Experience: 7 to 11 years About Accenture Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. Visit us at www.accenture.com What would you do You will be aligned with our Finance Operations vertical and will be helping us in determining financial outcomes by collecting operational data/reports, whilst conducting analysis and reconciling transactions.Financial planning, reporting, variance analysis, budgeting and forecastingFinancial planning and analysis (FP&A) refers to the processes designed to help organizations accurately plan, forecast, and budget to support the company s major business decisions and future financial health. These processes include planning, budgeting, forecasting, scenario modeling, and performance reporting. What are we looking for Problem-solving skillsPrioritization of workloadStrong analytical skillsAgility for quick learningResults orientation Roles and Responsibilities: In this role you are required to do analysis and solving of moderately complex problems May create new solutions, leveraging and, where needed, adapting existing methods and procedures The person would require understanding of the strategic direction set by senior management as it relates to team goals Primary upward interaction is with direct supervisor May interact with peers and/or management levels at a client and/or within Accenture Guidance would be provided when determining methods and procedures on new assignments Decisions made by you will often impact the team in which they reside Individual would manage small teams and/or work efforts (if in an individual contributor role) at a client or within Accenture Please note that this role may require you to work in rotational shifts Qualification BCom

About The Role Skill required: Financial Planning & Analysis - Financial Planning and Analysis (FP&A) Designation: Finance Process & Ops Specialist Qualifications: BCom Years of Experience: 7 to 11 years About Accenture Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. Visit us at www.accenture.com What would you do You will be aligned with our Finance Operations vertical and will be helping us in determining financial outcomes by collecting operational data/reports, whilst conducting analysis and reconciling transactions.Financial planning, reporting, variance analysis, budgeting and forecastingFinancial planning and analysis (FP&A) refers to the processes designed to help organizations accurately plan, forecast, and budget to support the company s major business decisions and future financial health. These processes include planning, budgeting, forecasting, scenario modeling, and performance reporting. What are we looking for Ability to establish strong client relationshipAbility to meet deadlinesAbility to perform under pressureAbility to work well in a team Roles and Responsibilities: In this role you are required to do analysis and solving of moderately complex problems May create new solutions, leveraging and, where needed, adapting existing methods and procedures The person would require understanding of the strategic direction set by senior management as it relates to team goals Primary upward interaction is with direct supervisor May interact with peers and/or management levels at a client and/or within Accenture Guidance would be provided when determining methods and procedures on new assignments Decisions made by you will often impact the team in which they reside Individual would manage small teams and/or work efforts (if in an individual contributor role) at a client or within Accenture Please note that this role may require you to work in rotational shifts Qualification BCom

Please share your profile to +919985737772 if you are interested The purpose of this position is to execute the plan ensuring the on time production of batches in the Plant and adherence of the personnel to the standard operating procedures. Operating the plant Through DCS panel & managing field plant activities to comply QHSSE requirement with conservation of natural resources / utilities / RM. Provide confirmation to operator for batch charging. Ensure process records are maintained in batch card. Where required call for the same for cross verification with panel readings. Check record of charging qty, pressure, flow, temp, unloading etc (as applicable) in batch card. Be vigilant in process monitoring, visual checks while batch is in process and coordinate with operator / shift in-charge for field report, process conformity and abnormalities observed, if any. Maintain communication and coordination with the / shift in-charge while batch is in process. Highlight deviations immediately to avoid rework / failure and control delay in delivery. Check the labels for lot nos, batch nos etc prior to its issue for fixing on packages. Ensure that necessary fitments and checks prior to tanker unloading or loading start-up are done. Maintain all necessary records and provide details of process summary in shift Log books including those related to Safety, Quality, Mechanical problems / repairs and process changes Implement / Maintain HSE practices in all activities. Ensure that batch data in the DCS is archived properly and can be retrieved when required. Maintain list of interlocks ensure that the same are in protected condition to avoid inadvertent use. Follow MOC procedures for any request for change in batch size, interlock, settings etc. Ensure that the equipment, operating vessel and lines, valves, etc in good condition & in synchronized condition with DCS / operating system. Coordinate with instrumentation team for all DCS settings, interlocks, changes, operating conditions. Ensure prompt maintenance, trouble shooting of deviations, breakdown corrections in coordination with instrumentation dept. Ensure that measuring / special devices (if any) are always in calibrated condition, if not get the same calibrated from instrumentation dept. Follow instructions provided by instrumentation dept for panel operations. Follow guidelines for waste management. Participate in safety talk and other routine training programs specific to the Job; trainings on Emergency response, mock drill and other QHSSE elements shall be strictly attended. To operate the DCS, monitoring of process efficiently to avoid potential failure. Provide training to sub ordinate for SOP / WI & HSE practices. To ensure the adherence of safety standards, operating procedures and processes for the related products as per the ISO norms by all subordinates To prepare reports related to production module of prior, during and post production of each batch To send in processed and finished product samples to the QC department for analysis and receive the feedback report of the same for dispatch/reproduction purposes To monitor the reactor status and inform the maintenance department if need be To fill up batch cards on the ongoing production To ensure that all safety procedures are adhered to in the Plant.

Role & responsibilities To ensure adherence to production plan as per the batch cycle and check the production plan with respect to the schedule To ensure production as per standard operating procedures Knowledge of DCS. To manage and guide the production team to achieve the targets set by the Production Manager / Head- Production : 1. Rescheduling shop floor activities as per the change in production plan 2.Planning for the manpower requirements to accomplish the production targets on schedule 3.Manage the inventory of intermediates and stock reconciliation to minimize the chances of stock out 4.Ensuring the use of calibrated equipments at the Plant and their proper handling to minimize downtime 5.Review operations and confer with technical or administrative staff to resolve production or processing problems To plan and coordinate with: 1.Stores department on raw material status in relation with the plan and rescheduling if need be 2.Maintenance department on routine, preventive & breakdown maintenance and to schedule shutdown 3.Dispatch department on prioritising batches & their size and in an emergency which calls for reproduction To train subordinates both on the job and during team meetings and conduct their performance appraisals To make entries of daily activities to provide all the necessary data relating to Plant for statistical analysis To handle non-conforming products as per the suggestions passed on by the Production Head To ensure proper safety measures/procedures are taken/followed at all times in Plant To prepare and submit daily production plan and status reports to the Production Head Preferred candidate profile B.E.(Chemical Engineering) - 04 07 Yrs. in production department Chemical/Petrochemical industry/Active Pharma Diploma Chemical Engineering - 07 10 years in production department Chemical/Petrochemical industry/Active Pharma Knowledge of reactor capabilities, process parameters, failure & data analysis system, ISO/OSHA safety norms. Skills:- Planning, Delegation, Communication (written & verbal), People Management, Coordination skills, Task completion, Time management

Monitor and control the plant operations through Distributed Control Systems (DCS) to ensure efficiency and safety. - Maintain optimal process parameters for bromine production and troubleshoot any deviations. - Handling Destillinstion Collumn.

Position: Instrumentation Engineer Job Location: Katol Plant (Halol-Gujarat) Education: Bachelor of Engineering - (Instrumentation & Control) Experience: 08 to 10 Years experience in function of DCS & PLC Role & responsibilities 1. Key Result Areas: Preventive Maintenance and Calibration . Major Activities: Execution of Preventive maintenance of equipment. Calibration of all type of transmitter and switches. Monthly monitoring of DCS controller, module and power supply. Outcome: Reduce breakdown of instruments, DCS and PLC hardware. Accuracy in process parameter like temperature, flow, pressure, level. 2. Key Result Areas: Spare part and vendor development. Major Activities: Maintain inventory of Spare part in store. Vendor development for emergency service and imported spare. Outcome: Attained emergency breakdown in minimum time to reduce production loss. 3. Key Result Areas: Emergency Breakdown Major Activities: Troubleshooting of control wiring. Spare replacement, Spare repairing. Outcome: Sustain productivity. Line-up system in minimum breakdown time. 4. Key Result Areas: Small project / CAPEX (Instrumentation) Major Activities: External party selection and quotation review (technical), project execution & completion Outcome: Improvement in process and plant facility 5. Key Result Areas: ISO and Audit compliances. Major Activities: Execute PM and calibration as per plan Record keeping/updating and audit compliance. Calibration of Gas detector as per plan. Outcome: To maintain ISO standard and Quality of product. 6. Key Result Areas: Department work progress Major Activities: Leadership, co-operation and support to technician Outcome: Work efficiency, safety and proper utilization of man hours.

Walk in Interview for the post of Production Supervisor/Executive @ Vadodara Location on 11th July 2025 Details are as follows:- Job Location: Jambusar, Gujarat Qualification: - B. Sc. / M. Sc. (Chemistry) / Diploma (Chemical) or B.E./B. Tech in Chemical Experience for Production: 5 to 9 years Experience for Supervisor & Executive role, Interview Date: 11th July 2025 ; Friday Interview Location: Hotel Regenta Central Harimangla, Near ABC Circle, Bharuch, Gujarat 392015 E-mail- jmb.onboarding@piind.com Requirement for Production Candidates must have hands-on experience with DCS panel operation or filed operation in a DCS-operated plant Handling of multiple unit operations and processes simultaneously Knowledge of safety practices is a must. Experience in handling hazardous chemicals and solvents. Roles and Responsibilities:- 1. operational knowledge of YOKOGAVA DCS2. Production planning, control and executing batches, optimization in the plant.3. Supervising of batches charging and verification of RM quintets4. Monitoring and maintaining of the parameter as per SOP5. Handling Of solvent recovery process.6. Basic knowledge of process safety standards (MSDS) & general industry standards7. Distillation Column (Atmospheric & vacuum),8. Formulation of Final products for dispatch, packaging of the material, final products, at the warehouse.9. Operating of GLR and SS reactor, Centrifugal pump, piston pump, vacuum pump, Jet Ejector system.10. Safety Knowledge, Permit

Role & responsibilities Fully Responsible for Boiler Desk Engineer(Control Room) Preferred candidate profile Operation and Mainteince, Power Plant. Candidate must have the knowledge of AFBC Boiler desk operation of Power Plant.

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Boiler Operation:Operate and control high-pressure boiler systems in a safe and efficient manner Monitor boiler parameters, such as pressure, temperature, and fuel levels Maintenance and Inspection:Conduct regular inspections of boilers and associated equipment to identify and address potential issues Perform routine maintenance tasks to ensure optimal performance Safety Compliance:Adhere to all safety regulations and procedures related to boiler operations Conduct safety checks and implement measures to prevent accidents or malfunctions Emergency Response:Respond promptly to any emergency situations, including equipment failures or malfunctions Implement emergency shutdown procedures when necessary Recordkeeping:Maintain accurate records of boiler operation, maintenance activities, and inspections Compile and submit reports as required by regulatory authorities Troubleshooting:Identify and troubleshoot issues related to boiler operation Collaborate with maintenance and engineering teams to resolve complex problems Efficiency Optimization:Implement measures to improve the energy efficiency and performance of boiler systems Recommend and implement upgrades or modifications when necessary Team Collaboration:Communicate effectively with other operators, maintenance personnel, and supervisors Collaborate with the engineering team on projects and modifications Training and Compliance:Stay informed about changes in regulations, technologies, and best practices in boiler operations Participate in training programs to enhance skills and knowledge

Role & responsibilities Achieve production as per plan Comply with documentation and reporting standards Improve and sustain GHK (5S) Achieve 'right first time' quality as per specifications Adhere to Co | Bu | Fu | department policies and SOPs (as applicable) Monitor usage of RM and utilities as per budgeted norms Conduct training programs for safety and productivity Coordinate with engineering for preventive maintenance Support initiatives to control fixed cost and continue improvement of process and safety Ensure optimum use of ERP system Preferred candidate profile Candidate have min 2 years of experience working in chemical manufacturing industry Interested candidates can direct share CV to diksheeta_patel@atul.co.in

Ensuring the implementation of safety and operation instructions. Ensuring the regular survey of the operating parameters. Planning and coordinating the activities of production operators during shifts. Application of permit to work system for all activities. Monitoring and controlling all plant process parameters and conditions. Reporting failures and implementing appropriate remedial actions. Safeguarding the environment throughout operations. Constantly monitoring control panels. Coordinating with external operators for plant operations. Ensuring all activities comply with safety standards.

Having 2-6 years of experience in, • Developing Control Logics in DCS systems based on SAMA sheets & control narratives (preferably those that may have experience programming in a Function Block Diagram environment). • Developing Graphics in DCS\PLC HMI systems based on P&IDs and graphic specifications. • Preparation of Control test cases/Instructions and perform logic & graphics testing. • Review of Functional requirements, generation of System Design Specification, preparing of Technical Reports & Generate Requirement Traceability Matrix. • Capture functional requirements from the design documents. • System Engineering & Cabinet Engineering • In DCS hardware engineering, you'll design, install, and maintain the physical components like controllers and I/O modules. You'll troubleshoot hardware issues, configure networks, and ensure the system functions flawlessly to control industrial processes • Created Macros, Control Logic sheets, and HMI screens based on functional requirements. • Test procedures developed for logic and graphics testing. • Performed engineering, CTE, & functional testing for Macros, Logic, & HMI screens. • Test reports created to demonstrate compliance with functional requirements. • Capable of studying and modifying Control Narratives, Functional Logic Diagrams, Cause & Effect Diagrams. Note: Operations & Maintenance, Field Experience are not eligible Roles and Responsibilities Control and Instrumentation engineer having 2-6 years of experience in the field of Instrumentation and control with complete engineering background. Candidate must have exposure to complete I&C life cycle and can independently author as well as review the Instrumentation deliverables. Typically requires a bachelor's degree in engineering in related Instrumentation field.

Job description Requirement for Power Plant O&M Site at Telangana (Locations : Suryapet - Mattapalli ) 1. BOILER DCS Operators - 01 Qualification: ITI / Diploma Experience: 3 years and above 2.Turbine DCS Operator - 01 Qualification: ITI/Diploma Experience: 3 years and above Desired Exposure: Experience in Operation of Utility Equipment (Boiler, Turbine, Air Compressor, Cooling tower and Water System) Interested candidates may send their CVs to rajamohan@oegindia.com with respective position name in subject line or whatsapp at 9677123394

Job Responsibilities : Abide by safe operating procedures within operating range Act as first responder to emergencies Suggest safety improvements Safe handling of hazardous materials and plant wastes Contribute to housekeeping Support contract workmen on safe working Monitor and control field equipment as per SOPs,SOCs,LLF checklist and ODR instruments Coordinate closely with shift superintendent/panel executive Collect and deliver samples from the field for laboratory testing Report promptly any abnormal observations to shift engineer /panel executive Handover / takeover of equipment from maintenance Perform condition monitoring using portable instruments (ODR) Perform minor troubleshooting Perform minor maintenance To contribute towards reduction of waste /handling of chemicals To operate equipment efficiently Identify and suggest opportunities for improvement Following latest safety guidelines, management guide line like, TQM, EFQM, QCC, 5S etc Maintain shift logs for respective area /equipment Follow instructions received from shift superintendent /engineer /panel officer Member of Auxiliary Fire Squad Education Requirement : Sc Experience Requirement : Relevant Experience B Sc / Diploma holder 2 years OR ITI with min 5 years in Field Operations Skills & Competencies : Good housekeeping Upkeep of Fire and Safety equipment in his area Field logbook / LLF checklist Segregation of waste Maintain equipment health through LLF and report equipment abnormality Fulfillment of identified training needs for self

JOB DUTIES AND RESPONSIBILITIES 1 To monitor shift activities, plan and ensure timely production completion activities as per plan and dispatch thereby ensuring optimal utilization of resources and ensuring quality standards being maintained at all time. 2 To ensure timely conducting Production Batches as per requirement, keeping productivity and quality norms in place. 3 Expertise in implementing cost saving measures to achieve substantial reduction in terms of man days, production cost, raw materials and energy consumption. 4 Set daily/weekly/ monthly objectives as per production planning. 5 Check production output according to specifications. 6 DCS operations/ trouble shooting & data recording. 7 Prepare reports on performance and progress. 8 Record all the production reports BMR/quality records/failure analysis/plant waste generation/management etc. 9 Train new employees and follow procedures. 10 Ensure plant strict safety guidelines as per company standards/guidelines 11 RM/PM planning & issuance from warehouse. 12 Maintain plant housekeeping & maintain required standards in all the production areas. 13 Planning, organizing, directing and running optimum day-to-day operations.

Work as Shift Incharge for DCS based chemical production using equipments like distillation column, reactors, filters, scrubbers, dryers, pumps etc, Ensuring compliance of Quality and Safety Standards, Team Management, IMS/ISO Compliance Participation and compliance of Kaizen/5-S, Continuous Improvement Projects Unit Operations: Bromination, Chlorination, Hydrogenation, Distillation Required Candidate profile : Ideal candidate must be a First Class B.E./B.Tech in Chemical Engineering with 2-6 years of experience in handling production activities of Hazardous Chemicals.

Company Name Hindalco Industries Limited ( Aditya Birla Group ) Company Brief : Aditya Birla Group - Spanning 40 countries, Aditya Birla Group is anchored by a strong force of over 187,000 employees, belonging to 100 nationalities. Please click on the link to know more about the Group (Aditya Birla Group | The Journey - YouTube) Hindalco Industries Limited is the metals flagship company of the Aditya Birla Group. A US$28 billion metals powerhouse, Hindalco is an industry leader in aluminium and copper. Hindalco also ranks as one of the most cost-efficient producers globally. With a pan-India presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India. Unit Name - Copper Tube Manufacturing - IGT - Baroda ( Waghodia ) Unit Brief : This project will be India's first Copper Tube Manufacturing facility, in area of Downstream Copper Products- Copper Tube and Copper Rod, Copper Alloy Rod, Copper Wires & Copper Alloy Wires. Purpose of establishing the Copper Tube is to improve cost competitiveness of Indias AC manufacturing, developing a local component manufacturing ecosystem is critical and recognizing the same, Government has announced a Production Linked Incentive scheme for the entire value chain. Position Name Jr Engineer /Asst Engineer /Deputy Engineer - Operation & Maintenance and Technical Service Qualification Diploma - Metallurgy/Mechanical Industry Preference Metals/Manufacturing/Forging/Foundry/Rolling/Melting Job Brief : To Operate Machinery: Operate various equipment and machinery involved in copper tube manufacturing processes, such as casting machine, rolling machines, drawing & grooving machines, level winders annealing furnaces, and finishing equipment. Monitoring Production: Monitor production processes to ensure smooth operation and meet daily targets, detect abnormalities, and troubleshoot equipment malfunctions to minimize downtime. Responsible for machine related OEE. Quality Control: Conduct regular quality checks on intermediate and final products to ensure adherence to specifications and quality standards. Maintenance Tasks: Perform routine maintenance tasks on machinery and equipment including lubrication, cleaning, and minor repairs to ensure optimal performance and prevent breakdowns. Ensure availability of spares for seamless operation of machine. Troubleshooting: Identify and diagnose equipment issues, mechanical failures, or malfunctions, and implement corrective actions to restore functionality. Safety Compliance: Adhere to safety protocols and procedures, including wearing appropriate protective gear, handling materials safely, and following lockout/tagout/try out procedures during maintenance activities. Documentation: Maintain accurate records of production output, equipment maintenance activities, and quality control checks as per company protocols. Team Collaboration: Coordinate with production teams, supervisors, and maintenance technicians to ensure effective communication and collaboration in resolving issues and achieving production targets. Continuous Improvement: Participate in continuous improvement initiatives by providing feedback, suggesting process enhancements, and implementing best practices to optimize production efficiency.