Plumbing Design Engineer Building Projects | DAR Engineering Location: GURGAON Are you a passionate Plumbing Design Engineer with a flair for delivering high-quality building services solutions? Join DAR Engineering, a trusted name in multidisciplinary engineering design, and be part of transformative projects shaping skylines across the region. Key Responsibilities: Develop plumbing system designs including water supply, drainage, stormwater, and fire suppression systems for commercial, residential, and institutional buildings. Prepare layouts, schematics, and specifications using AutoCAD and Revit. Perform pipe sizing calculations, flow rate calculations, pressure loss assessments, and equipment selection. Coordinate with architectural and other MEP disciplines to ensure design integrity. Ensure compliance with relevant local and international codes and standards (e.g., IPC, NFPA, ASHRAE). Support construction teams with technical queries, submittal reviews, and site visits when necessary. Qualifications & Experience: Bachelor's Degree in Mechanical Engineering or a related field. 815 years of relevant experience in plumbing design for building projects. Proficiency in AutoCAD, Revit, and plumbing calculation tools. Strong understanding of international plumbing codes and sustainable design practices. Excellent communication and coordination skills. What We Offer: Competitive salary and benefits package. A collaborative and multicultural work environment. Exposure to high-profile projects across the Middle East and beyond. Opportunities for continuous learning and career advancement.

Good know how on design of electrical systems for LV/ MV/ HV/ EHV substations from base design, detail design to IFC stages. Working knowledge on T&D functions w.r.t construction contractors in coordination with other engineering disciplines. Working knowledge on preparation of Equipment Layouts (GIS, switchgear, transformer, capacitor bank etc.), Trays, duct banks & tunnel layouts, Lighting, Shielding & earthing, AC/DC auxiliary system design etc. Familiar with relevant codes & standards International electro-technical commission (IEC), IEEE, BS (British Standards), Saudi Standards, Quality and Metrology Organization (SASO), SEC standards etc. Strong understanding and working knowledge of design software – CDEGS, Dialux, Building Designer, MicroStation, AutoCAD etc. Fair understanding of 3D tools, 3D modelling and DMS. Be passionate about electrical systems and the power environment. Be a creative leader in design and project management. Have excellent technical skills and be able to mentor staff in their own development and the development of projects. Good communication skills, both in presentation and documentation with a command over English.

Job Description: We are seeking a skilled and experienced Civil Design Engineer to support the engineering and design of transmission line projects. The ideal candidate will bring deep technical expertise, familiarity with local and international standards, and a strong understanding of civil and structural design principles, particularly in relation to tower foundations. Key Responsibilities: Lead the preparation of civil, structural, and architectural designs for transmission line projects, ensuring alignment with quality standards, project specifications, and deadlines. Ensure full compliance with SEC (Saudi Electricity Company) standards and other regulatory requirements, including PTS , NGSA , and RC . Apply international codes and standards such as ACI , IEEE 691-2001 , and other relevant frameworks during design development. Provide specialized design expertise in tower foundations , with an emphasis on deep foundations , lattice , and monopole tower structures. Perform structural analysis and design using engineering software including STAAD Pro , STAAD Foundation , and MATHCAD . Defend and justify engineering designs to clients and approval authorities, ensuring designs meet both technical and regulatory requirements. Coordinate across multidisciplinary teams to ensure seamless integration of civil design with other engineering disciplines. Implement and maintain internal quality control measures in accordance with the Quality Management System (QMS) . Archive and manage project documentation in compliance with the company's Document Management System (DMS) . Maintain up-to-date knowledge of industry standards, engineering trends, and innovations through continuous professional development. Ensure client expectations are consistently met or exceeded through proactive communication and high-quality deliverables. Required Skills and Qualifications: Strong working knowledge of SEC standards , PTS requirements , and international design codes . Proficiency in STAAD Pro , STAAD Foundation , and MATHCAD . Demonstrated experience in designing various tower foundation types, particularly deep foundations . Excellent communication skills, with the ability to present and defend technical designs to internal and external stakeholders. Basic understanding of transmission line infrastructure, including tower types, families, and gantries for various voltage levels. Ability to work independently as well as collaboratively in a multidisciplinary team environment.

As a Mechanical Design Manager, you will play a critical role in leading and overseeing the design and development of mechanical design, systems, components, and products within our organization. This role requires a deep understanding of mechanical engineering principles, strong leadership skills, and a proven track record of successfully managing complex design projects. You will collaborate with cross-functional teams, mentor junior engineers, implement Quality Assurance/Control activities and drive innovation in projects design. Project Leadership: Lead and manage a team of mechanical engineers, designers, and modelers. Set project goals, timelines, and priorities, and ensure successful project execution. Act as a technical mentor to team members, providing guidance and fostering skill development. Mechanical Design: Develop innovative mechanical designs for products, systems, and components. Utilize BIM/ Revit, CAD software (e.g., AutoCAD) to create detailed design drawings. Perform engineering calculations, simulations, and analysis to validate design concepts. Ensure designs comply with industry standards, safety regulations, and quality requirements. Design Optimization: Continuously seek opportunities to improve design efficiency, cost-effectiveness, and performance. Collaborate with cross-functional teams (electrical, architectural, structural, etc.) to integrate designs seamlessly. Implement Design for Constructability (DFC) principles. Implement sustainability and acoustic requirements in the developed design Testing and Commissioning: Perform/apply testing, commissioning and validation procedures / workflows. Analyze test results, identify issues, and iterate on design improvements as needed. Ensure designs meet performance, reliability, and durability specifications. Documentation and Reporting: Maintain comprehensive design documentation, including drawings, specifications, and reports. Provide regular project status updates to stakeholders and management. Prepare technical reports and presentations to communicate design concepts and outcomes. Collaboration: Collaborate with cross-functional teams to ensure seamless integration of mechanical designs into overall project development. Work closely with procurement to source materials, components and 3rd party services ensuring timely availability. Engage with external partners, suppliers, and vendors as needed. Regulatory Compliance: Stay informed about relevant industry standards and regulations. Ensure that designs adhere to all applicable safety and compliance requirements. QUALIFICATION, EXPERIENCE & SKILLS: Bachelor's or Masters degree in mechanical engineering or a related field. Proven experience (typically 15+ years) in mechanical design and engineering. Strong proficiency in CAD software (e.g., Revit, AutoCAD, BIM 360). Excellent problem-solving skills and a track record of innovation. Leadership and project management experience, with the ability to lead and motivate a team. Knowledge of construction processes and materials. Strong analytical and communication skills. Attention to detail and a commitment to quality. Familiarity with regulatory standards and compliance in relevant industries (if applicable).

Position: Senior Architect - Landscape Location: Gurgaon Education: Postgraduate degree (M.Arch) in Landscape . Experience: Minimum 10+ years in landscape architecture, with at least 3 years in a senior capacity. Experience in Middle East/overseas projects is an advantage. Key Responsibilities: Design and Creativity: Develop innovative design concepts in collaboration with the lead landscape architect, addressing unique site conditions and aligning with client objectives. Deliver outstanding results through design quality, efficient processes, and operational and commercial excellence. Project Management: Coordinate and manage tasks across various landscape design and master planning projects. Prepare and present design proposals to clients and approving agencies, showcasing technical expertise in landscape architecture and urban public realm design. Collaboration and Coordination: Work closely with other business units, design specialists, and external project team members to ensure timely and high-quality project delivery. Liaise with colleagues, stakeholders, and clients to provide technical landscape input throughout project phases. Technical Expertise and Documentation: Produce illustrations, technical designs, and related documentation to support a range of projects. Conduct site visits to ensure design implementation aligns with project objectives and standards. Client Engagement and Marketing: Actively participate in client-facing presentations and discussions. Support marketing efforts by contributing to proposal preparation, bids, tenders, and leveraging industry contacts for new opportunities. Mentorship and Leadership: Mentor and guide junior landscape architects to foster professional growth and ensure high-quality project outcomes. Assist in the technical supervision, training, and skill development of junior and mid-level team members. Quality Assurance: Review and validate design submissions for accuracy and compliance prior to issuance. Maintain a positive work environment by fostering open communication and regularly engaging with team members. Skills: Strong client-facing skills and ability to build relationships. Excellent organizational and attention-to-detail capabilities. Proficient verbal and written communication skills. Up-to-date knowledge of industry trends and ability to assess their applicability.

Reporting Line : Country head & MEP design Manager, Riyadh Summary DAR is looking for a professional for the role of MEP Manager, capable to lead the companys Mechanical, Electrical, ELV and IBMS Section (Design Department) and all its projects from their initiation to closure and shall ensure adherence to the project deadlines and quality requirements to fulfil client requirements. The MEP Manager will be instrumental to lead and monitor multiple teams simultaneously involved in the design of all the systems under these disciplines of various project in this region. The incumbent creates a healthy environment within the department by appraising performance of the team and provide guidance and coaching whenever required. This MEP Manager shall assist the country manager and the MEP manager at Riyadh in preparing departmental budget for the projects, other technical aspects and support to the HR department in the recruitment process Responsibilities Assist top management in the development of long-term strategic objectives for the Mechanical, Electrical, ELV and IBMS sections. Assumes full technical responsibility and operational accountability for Mechanical, Electrical, ELV and IBMS team output on projects. Adopt appropriate measures to optimize costs and increase profitability. Ensure compliance with company policies, procedures and standards, applicable laws and regulations; monitor all section staff and ensure their compliance with the same. Understand owner/client requirements as reflected in TORs/RFPs issued by owners/clients; attend pre-tender meetings as and when required in order gain clarifications on owner/client requirements. Provide the country manager inputs (e.g., man month requirements, design cost estimates etc.) regarding the contribution of the Mechanical, Electrical, ELV and IBMS section to projects. Support other Managers in the evaluation of proposals submitted by sub-consultants during RFPs issued by DAR; recommend sub-consultants for Electrical, ELV and IBMS design services based on owner/client requirements. Establish internal project milestones and timeframes to guide all projects, ensuring that designs are completed within the allocated timeframe and assigned budget; supervise section staff to always ensure their adherence to the same and assist them in meeting project milestones (as and when required). Monitor and ensure that all the department engineers are coordinating effectively with the various architects and engineers throughout the project (planning, concept, preliminary, final etc.). Design, supervise and approve the development of the department engineers in the design of the systems from concept to completion and to ensure the following: 1. Designs effectively respond to client/owner requirements (e.g. designs based on owner/clients budget etc.). 2. Drawings comply with the statutory requirements for the Mechanical, Electrical, ELV and IBMS sections. 3. Drawings are fully functional, making adequate provisions for the designs developed by the other disciplines (e.g. architecture, structure, ID, Landscape etc.). Exercise quality control of drawings produced by the section, ensuring that they adhere to quality standards. Remain abreast of changes in the statutory requirements regarding Mechanical, Electrical, ELV and IBMS section systems and components. Ensure that Mechanical, Electrical, ELV and IBMS section system components and materials specified for designs are relevant and comply with statutory requirements; ensure that the specifications document is updated to reflect any change in statutory requirements. Ensure that the support for all the ministerial approvals for Mechanical, Electrical, ELV and IBMS section designs are gained in a timely manner by the section engineers. Assist on site Mechanical, Electrical, ELV and IBMS section engineers by responding to technical queries which they raise; assist site staff in verifying sample materials submitted by contractors (as and when required) to ensure compliance against ministerial requirements and specifications. Determine the structure, size and composition of design teams based on project requirements. Ensure to provide engineers with clear and concise instructions in order to avoid confusion, re-work and errors; follow up with staff to ensure compliance against requirements. Appraise the performance of engineers and modelers/draftsmen within the section; ensure to provide continuous feedback and guidance to keep performance on track.. Assist Human Resources in conducting recruitment activities for the Mechanical,Electrical, ELV and IBMS section; Interview applicants as and when required. Ensure compliance with DAR company policies, procedures and standards, Provide inputs to Business Development with presentations to showcase the design capabilities of the team in support of the marketing needs. Evaluate proposals submitted by sub-consultants during Request For Proposal (RFP) and recommend to DAR management with the best technical and financial quote. Develop a thorough understanding of client design requirements, Terms of Reference (TOR), RFP etc. and advise the team with the design requirements. Effectively manage engineers throughout project lifecycles (planning, concept, preliminary, final etc.) with the job allocation and time management with the allocated budget. Review the design drawings and specifications to ensure that the complete design is complying with the design intent of the project. Arrange technical sessions with manufactures/suppliers of Mechanical,electrical, ELV and IBMS components and materials (as and when required) to ensure that the team is well aware of the competent products which can add value to the project. Before issuing the tender design documents, proper verification must be done to ensure that materials specified comply with statutory requirements and have strong representation in the country. Maintain continuous quality control by engaging the engineers on time during the design stages to ensure that they adhere to DAR quality, CAD standards, and Revit BIM requirements (e.g. high standards of visual presentation, error free, properly dimensioned, x-referenced etc.) Recognize and develops team's talent and consequently undertake appraisals and personal development plans for team members. Education Degree in (B.Tech. or B.E,) in Mechanical, Electrical or Electrical & Electronics Engineering, Master's degree, Desired Masters in business administration (MBA), PhD or Doctorate, Desired Qualifications Minimum 20+ years of experience in design and site supervision in construction industry, out of which at least 15 years of design experience. Extensive project experience in the design and construction of projects of different magnitude and functionality, necessitating high levels of technical competence in local, regional and international standards. Experience working on a variety of major multi-discipline design projects. Desirable to have experience in working for international consultancies. Good commercial awareness, timely monitoring and managing of the project within the budget, business management skills, knowledge in the evaluation of the profit and loss Familiar with relevant local and international industry standards and guidelines (e.g. NFPA, EIA/TIA, BSEN) Knowledge of ministerial regulations and standards Familiar with the relevant design software's Certifications Preferred to have certification from any Society of Engineers, any local Engineer's society membership or Saudi Engineers (SEC in KSA), CRPEP (for Bahrain) etc Chartered Engineer, desired. MCIBSE, IEEE, desired LEED/WELL/PMP certification, desired Professional Experience Has an engineering design background and able to fully demonstrate design and lead the design team. Work experience (design and execution) in Middle East at least for 10 years Experience in managing a team of 20 to 30 department engineers and modelers. Minimum 10 years of experience in working with multidisciplinary international consultancies during the recent past. Familiar with relevant local and international industry standards and guidelines Extensive MEP design experience in the construction and engineering industry Knowledge in QA/QC standards and process. Knowledge in handling international projects with exposure to international codes and standards Functional Experience Experience in adapting to new technologies and application software. Made sound decision in selecting sub consultant to participate in projects. Proven track record on effective people/team management skills to ensure meeting project deadlines. Comfortable in communicating and challenging engineers design to come up with the optimum electrical project design Generated good working relationships with internal and external clients and develop a client relationship management strategy. Client focused high level of relationship management skills Can identify and nurture talent in others to build a high performing and technically sound team Experience confidence in good communication skills and professional approach to clients, subordinates and across different DAR functional department Exercised critical thinking in analysing project status report submitted by engineers. Benefits: Competitive salary and performance-based bonuses. Comprehensive health and wellness benefits. Opportunities for professional development and growth. Collaborative and innovative work environment. Company Overview: DAR Engineering is a leading multidisciplinary consultancy firm providing design, architecture, engineering, project management, construction management and planning services across a broad range of sectors. We assist national governments, international organizations, and private sector companies by delivering comprehensive solutions with global expertise. Website : http://www.dar-engineering.com Industry : Architecture and Planning

BUSINESS DEVELOPMENT MANAGER Do you aspire to advance your career within one of Saudis best consulting Company in Engineering Design, Architectural Design, Project Management, Construction Management and Planning services. Are you driven by well-thought-out buildings and its design? Then, become a part of DAR Engineering and bring your skills into play on our many exciting and multidisciplinary projects! DAR Engineering is looking for an experienced & versatile professional with 15+ years of rich experience in Business Development, Marketing, Business Strategy, Key Account Management, and Contract Negotiation. The candidate should have exposure in varied market sectors including Residential and Commercial Buildings, Hospitals, Hotels, Airports, Smart Cities etc. The candidate should also have handled bids and proposals with scope of Designing, Project Management, Construction Management works. Experience of handling both government and private clients within the Indian and Southeast Asian Market. JOB RESPONSIBILITIES Displayed competence in managing and nurturing Key Accounts and creation of new accounts. Expertise in the Building sector including Residential, Commercial, Hotels, Hospitals, Airports, Smart Cities etc. Strategy formulation for Diversification to the targeted sectors. Abundant experience in generating qualified leads and converting them to prospect. Know-how in handling the Bid from lead generation to RFP and Submission. Possess strong sense of aesthetics, an eye for detail, a sense of balance and volumetric compositions. A place to work and so much more At DAR, we work together with our customers to shape a sustainable and livable world. We do it by collaborating to create the solutions the world needs today to enable a better tomorrow. Get to know us even better at our website, www.dar-engineering.com, where you can learn more about our projects, our strategy, what we want to achieve and what life is like at DAR. Diversity is fundamental to DAR and inclusion is key. We are committed to creating a respectful and fair work environment where all employees have a sense of belonging and equitable opportunities to thrive and grow. We take diversity and inclusion into account in all relevant decisions and processes. We offer a competitive salary and benefits package, as well as opportunities for professional development, continuous learning and growth and career advancement. Work with diverse and talented professionals from various backgrounds and experiences. Work in a friendly environment, where everyone shares positive vibes and excited about our future.

Ability to draw projects as per the requirement in line with given instructions. Perform the required design tasks within the allocated time respecting the deadline with quality output. Be familiar with applicable codes & standards. Strong working knowledge of Micro station/ Building Designer/AutoCAD and 3D drafting tools. Full knowledge of project filing system and working knowledge on document management system. Be passionate about drafting. Good communication skills, both in presentation and documentation with command in English

Good working knowledge on design of control, protection, metering, and monitoring systems for LV/ MV/ HV/ EHV substations from concept design to construction drawings. Working knowledge on T&D functions w.r.t construction in coordination with other engineering disciplines. Working knowledge on control, protection, metering, and monitoring systems pertaining to control & protection schemes, CT/ PT calculations, relay setting calculations etc. Strong Knowledge of SAS system, IED relays, IEC61850, and interface with SCADA and communication Familiar with relevant codes & standards International electro-technical commission (IEC), IEEE, BS (British Standards), Regional Standards, Quality and Metrology Organization (SASO), SEC standards etc. Strong understanding and working knowledge of design software – DIGSI, PCM600, MICOM AGILE, Envista, SEL, Building Designer, MicroStation, AutoCAD etc. Be passionate about protection systems and the power environment. Be a creative leader in design and project management. Have excellent technical skills and be able to mentor staff in their own development and the development of projects. Good communication skills, both in presentation and documentation with a good command over English.