9 Cwi Jobs

1. Developing welding procedures for Carbon, alloy, stainless and high tensile steels for the manufacture of Boilers, Heat Exchanger and Pressure Vessels to various national and international codes. 2. Must have excellent grasping power & presentation skills & must process interpersonal & communication skills to maintain synergy between different customers and third party. 3. Must have analytical skills to dig out root causes in the area of welding. 4. Experience in GTAW automation will be an added advantage. 5. Experience in exotic materials will be an added advantage. 6. Should be aware with welding of different kind of material as P1(C-steel), P3, P4, P5 (Cr-Mo steel), P6, P7, P8 ( Martensitic, Ferritic, Austenitic steel). Worked with materials like 304,304L,316, 316L,321,410, Inconel, Duplex, Super Duplex, etc. 7. Knowledge of ASME codes and standards for Pressure Vessels and Boilers (ASME SEC I, SEC II, SEC V III, SEC IX, ASME B31.3). 8. Knowledge of Weld Plan, PQR, WPS, SWP, Welding Repair procedure, heat treatment, consumables estimation & inventory management & Non-Destructive Examination (LPE, MPE, UE, RE etc.). 9. Knowledge of Welder training & qualifications. 10. Knowledge of Different Welding Processes like SMAW, GTAW, SAW, GMAW, ESSC, FCAW, Groove welding & weld overlays. 11. Hands-on experience in welding of high-pressure piping systems and boiler tubes including socket weld, butt weld, and fillet weld joints. 12. Familiarity with spool fabrication, fit-up inspection, and welding of process and utility piping for skid-mounted systems. 13. Should have exposure to orbital welding used in tubing/skid applications, especially for cleanroom or high-purity service lines. 14. Capable of developing welding techniques for boiler tube panels and membrane wall welding, including use of narrow gap and TIG root welding techniques. 15. Understanding of PWHT (Post Weld Heat Treatment) requirements and welding sequences for piping and boiler components to avoid distortion and stress concentration. 16. Experience in managing welding activities in shop and site environments for power plant boiler installations and piping erection projects. 17. Familiar with isometric drawings, pipe support standards, and piping classes including critical piping loops in high-pressure steam and utility services. 18. Should have knowledge of IBR and associated compliance and documentation required for welding in pressure piping and boiler applications.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position The Mechanical QA/QC Engineer will be responsible for implementing and monitoring quality assurance and control systems to ensure that all mechanical construction activities meet the defined standards, specifications, and regulatory requirements. The role ensures quality compliance across equipment erection, piping, welding, hydro-testing, and commissioning at an industrial construction site. Experience Experience: 8–10 years in QA/QC roles within industrial construction projects such as power plants, oil & gas, steel, cement, or heavy engineering sectors. Sound knowledge of ASME, AWS, IS codes, and other relevant industry standards. Certified Welding Inspector (CSWIP 3.1 / AWS-CWI) preferred. Familiarity with ISO 9001 standards and implementation. Good communication and documentation skills. Proficient in MS Office and QA/QC reporting tools. Qualification Qualification: B.E./B.Tech in Mechanical Engineering Key Responsibilities Review and implement Project Quality Plans, Inspection & Test Plans (ITPs), Method Statements, and related QA/QC documents for mechanical works. Conduct material inspections and review Material Test Certificates (MTCs) for all incoming mechanical equipment and components. Monitor and inspect welding activities, WPS, PQR, and welder qualifications. Supervise and verify fit-up, dimensional checks, and welding inspections (visual and NDT). Coordinate with Third Party Inspectors (TPIs) and client representatives for stage-wise inspections and approvals. Ensure proper documentation of quality records, test reports, calibration certificates, and inspection reports. Carry out line checking, punch listing, and witness hydrostatic/pneumatic testing of piping systems. Participate in root cause analysis for non-conformities and develop corrective and preventive actions. Ensure implementation of site-specific quality control procedures and continuous improvement practices. Prepare weekly and monthly QA/QC reports for management and clients. Support mechanical completion and pre-commissioning activities with quality compliance. This position is on a consultant role at TCE. Competencies

Designation: QC Welding Inspector (CWI/CSWIP) Qualification: Dip or B.E Experience : 3 year to 5 year Salary : 4000 SAR - 6000 SAR Gulf Experience Mandatory CWI/CSWIP Must Need Direct Employment Visa contact HR-Mohammad- 90421 99659

1. Developing and implementing welding procedures, and techniques 2.Quality control and testing methods 3. Coordination with shop and customer for quality checks 4. training for proper welding and certifications.

1. Developing and implementing welding procedures, and techniques 2.Quality control and testing methods 3. Coordination with shop and customer for quality checks 4. training for proper welding and certifications.

Job Description Position: Manager Quality (QA QC) Company Name : POSHS CINOTI PVT LTD Website: http://www.poshscinoti.com Location: Asawali, Khandala, Satara Qualification: Education: B.E / B.Tech - Mechanical Experience: 10 to 12 years of relevant field experience Role & responsibilities Strong understanding of welding standards and best practices is essential. Experience in developing and administering policies to improve product quality, ensuring compliance with international standards, and managing quality assurance activities. Demonstrated leadership behaviours to guide and coordinate quality control and assurance activities within the fabrication shop. Ability to interpret project specifications, standards, and inspection reports to ensure production meets quality standards. Excellent written and verbal communication skills are necessary for effective interaction with team members, management, and clients. Experience with lean manufacturing principles and continuous improvement strategies to enhance efficiency and product quality. Knowledge of safety standards and regulatory compliance related to fabrication processes. Knowledge of sustainable manufacturing practices, including material recycling and waste reduction in fabrication. Implementation of innovative techniques and technologies to ensure continuous quality improvement. Preferred candidate profile Lead Auditor ISO9001:2015, Six Sigma Black Belt, AWS Certified Welding Inspector (CWI) Perks and Benefits PF Benefit. Diwali Bonus. Retention Bonus. Mediclaim Facility. Canteen Facility. Bus Facility. If you are interested in moving forward with the application process, kindly respond to this email ( hr1@poshsmetal.com ) with the following required information: Total Experience: Relevant Experience: Current CTC: Expected CTC: Notice Period: Current Location: Preferred Location: Availability for Interview: Mode of interview:

Complete Fixed Asset Accounting within SAP S/4 Hana environment Must have Knowledge of working on Project System, WBS, Network, Asset creation settlement, Capex advances, Capital Commitment, WDV report Versed with CWIP, Internal & PM Order Settlement Required Candidate profile Must be Finance Graduate, who has well versed SAP Hana Must have experienced in Fix Asset Accounting Project System, WBS, Network, Asset creation settlement, Capex advances, Capital Commitment, WDV

Role & responsibilities Department: Fabrication / Production / Quality Reports To: Production Manager / QA Manager / Plant Head Experience Required: 48 years Education: Diploma / B.Tech in Mechanical Engineering or relevant field Certifications Preferred: CSWIP 3.1 / AWS-CWI / ISO 14731 upervise and coordinate welding activities in production or project environment. Review and approve Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Qualification Tests (WQT). Ensure compliance with international standards like ASME, AWS, ISO 9606, and EN ISO 3834. Monitor welder performance and manage qualification records.

We require a CHW PIPING TEAM for the airport and Cement Plant project. We need 4 fitters, 6 welders, 10 helpers, and 10 Riggers. An Applicant who has a team imminently contact us at 9809819595.