Description Job Summary The Mechanical Maintenance Technician – Level III is responsible for troubleshooting, assembling, installing, testing, and maintaining mechanical systems and equipment in a manufacturing environment. This role requires advanced mechanical skills and the ability to work independently or mentor less experienced technicians. The technician ensures equipment reliability, supports continuous improvement initiatives, and contributes to a safe and productive workplace. Key Responsibilities Health, Safety & Environmental (HSE) Immediately report and stop work for any injury hazards or incidents. Use appropriate personal protective equipment (PPE) and comply with all HSE standards, procedures, and regulations. Correct hazards within scope and report potential environmental impacts. Participate actively in HSE training and promote a culture of interdependence and safety. Quality Perform work to high standards of craftsmanship based on diagrams, manuals, and specifications. Support downtime analysis and contribute to continuous improvement of preventive maintenance programs. Conduct quality inspections and follow all process documentation and quality procedures. Raise issues proactively to minimize cost and quality risks. Delivery & Maintenance Operations Independently perform troubleshooting, mechanical repairs, and scheduled maintenance of CNCs, VMCs, HMCs, SPMs, gantry, and robotic systems. Document preventive, corrective, and emergency maintenance activities accurately. Maintain clean, safe, and organized work environments through routine housekeeping and machine cleaning tasks. Participate in identifying and solving manufacturing constraints and improving process efficiency. Teamwork & Communication Collaborate effectively with cross-functional teams, including operations, engineering, and quality. Provide informal mentorship and coaching to less experienced technicians. Completely required training aligned with business and individual development goals. Contribute actively to Total Productive Maintenance (TPM) teams to enhance safety, quality, and productivity. Responsibilities Competencies Collaborates: Works well with others to achieve shared goals. Communicates Effectively: Delivers clear, concise, and audience-specific information. Customer Focus: Understands internal customer needs and strives for service excellence. Decision Quality: Makes timely and effective decisions to support operational goals. Drives Results: Consistently meets and exceeds job expectations. Manages Complexity: Navigates mechanical and operational challenges effectively. Nimble Learning: Learns quickly from successes and setbacks to improve performance. Health and Safety Fundamentals: Promotes and models proactive health and safety behaviors. Safety controls: Identifies risks related to electrical, hydraulic, and pneumatic systems and applies appropriate control measures. Manufacturing Knowledge: Understands and applies manufacturing processes and improvements. Values Differences: Respects diverse perspectives and builds inclusive team environments. Education, Licenses, and Certifications High school diploma or secondary education certificate required. Equivalent industry experience may substitute for formal education requirements. This role may require licensing or certifications based on export control or local regulatory compliance. Qualifications Skills and Experience Needed Experience Requirement: 4–5 years of hands-on mechanical maintenance experience. Preferred Field: Mechanical Maintenance within a machine shop or manufacturing environment. Specific Experience: Maintenance and troubleshooting of CNC machines (VMC, HMC), SPMs, gantry systems, and robotic systems. Familiarity with preventive and predictive maintenance programs. Experience interpreting technical diagrams, blueprints, and maintenance documentation. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2414875 Relocation Package Yes Show more Show less

Description GPP Database Link (https://cummins365.sharepoint.com/sites/CS38534/) Job Summary As part of a formal skilled trades training program, assists site Machinist skilled trades to learn and develop tool room skills in a manufacturing environment under direct guidance. Apprentice will be required to successfully complete and document specified classes and a minimum quantity of on the job training hours. Learns and understand the protocols of working safely with electricity and other energy sources with industrial equipment. Key Responsibilities Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Learns and applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Performs supervised work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Attends classes required to build basic tool room skills and knowledge to qualify as a Machinist. Completes all required on the job training hours. Repairs and maintains manufacturing equipment and other miscellaneous duties within their capabilities . Assists with preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints Solve problems and improve processes Participate in continuous improvement activities Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. Responsibilities Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience Minimal or no work experience required. Qualifications The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 2-3 years experience in machine shop and should have an engineering diploma in Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2412826 Relocation Package Yes Show more Show less

Description GPP Database Link (https://cummins365.sharepoint.com/sites/CS38534/) Job Summary Analyzes and manufactures complex components using machine tool equipment. Learns and understands the protocols of working safely with electricity and other energy sources with industrial equipment. May work independently and instruct or coach others. Key Responsibilities Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Fully proficient setting up and operating machine tools such as lathes, milling machines, shapers, grinders and Computer Numerical Control (CNC) equipment to machine parts to specifications. Ability to use precision measuring devices, layout work and set up tool room machines to build or fabricate details and assemble as needed. Instructs and coaches others and acts as an informal resource for team members with less experience. Performs and documents preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Performs other duties as required to meet business goals. Identify and reduce manufacturing constraints Schedule maintenance activities around production requirements Solve problems and improve processes Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. Responsibilities Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Decision quality - Making good and timely decisions that keep the organization moving forward. Drives results - Consistently achieving results, even under tough circumstances. Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience Requires significant relevant work experience or specialized skills obtained through education, training or on-the-job experience. Qualifications The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 5-8 years experience in machine shop and should have an diploma - Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating, cylinder & block head Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2412056 Relocation Package Yes Show more Show less

Description This entry-level/early-career professional, product-focused position applies knowledge of engineering principles and design practices to create optimized design concepts and mechanical design specifications. The role considers application, cost, weight, performance, reliability, durability, manufacturing, assembly, and serviceability. The Product Systems Design Engineer effectively communicates the capability of a design concept to meet cross-functional requirements, assesses alternative and competitive design concepts, and collaborates across disciplines to develop corporate and customer requirements, including those required to resolve product issues. Key Responsibilities Investigates Value Package Introduction (VPI) program team or field-based issues, understands causal mechanisms, recommends appropriate action, and owns problem resolution from a design perspective while documenting results with guidance from more experienced team members. Applies and supports the execution of processes such as Critical Design Decisions, System Design and Validation Consideration Checklist, Design Review, and tools such as iDFMEA, DVA, GD&T, CREO, ANSYS Workbench required to enable high-quality component and subsystem-level design decision-making and refinement. Obtains input and negotiates with cross-functional and cross-discipline technical experts and senior-level designers to communicate the component and subsystem design intent through thorough Design Review packages. Supports design decision-making in areas such as concept selection, optimization, and design specifications impacting customers for Product Preceding Technology (PPT), VPI, or Value Package Change Request (VPCR) initiatives. Owns problem resolution for moderately complex components, products, systems, or subsystems, with increasing technical complexity and ambiguity as experience is gained. Provides independent execution of established work processes and systems while developing technology or product knowledge and engaging in process improvements. Coordinates and directs work among technicians and/or temporary student employees. Contributes effectively to team goals, exhibits influence within a workgroup, and continues to develop proficiency in critical competency areas. Responsibilities Experience: Entry-level/early-career professional. Preferred candidates would have relevant experience working in a temporary student employment environment (intern, co-op, or other extracurricular team activities) or as an early-career professional in a relevant technical discipline. Knowledge of MS Office and CREO tools is also preferred. Technical Skills And Knowledge Product Lifecycle Management of Automotive components Creo 3D modeling & 2D drafting GD&T knowledge Tolerance stack-up analysis Basic DFMEA Cross-Functional Team (CFT) interaction Core Competencies Cross-Functional Design Integration - Translates value package requirements into virtual designs and communicates design capability through approved cross-functional design reviews. Mechanical Design Modeling and Analysis - Creates CAD models per Cummins' standards for system design concepts and system-level computer analyses such as Dimensional Variation Analysis and Finite Element Analysis. Mechanical Design of Mechanical Systems - Develops innovative and robust design concepts to meet Cummins and customer expectations while considering lifecycle requirements. Mechanical Design Specification - Creates complete specifications, including solid models, configured engineering bill of materials, and detailed drawings adhering to national, international, industry, and Cummins' standards. Product Function Modeling, Simulation, and Analysis - Uses computational tools to predict product function performance. Product Platform Planning and Architecting - Develops holistic product platforms with key architectural features for future markets. Product Problem Solving - Uses structured problem-solving processes to resolve product issues effectively. System Requirements Engineering - Translates stakeholder needs into verifiable requirements and manages system requirements through the product lifecycle. Product Failure Mode Avoidance - Identifies potential failure modes and mitigates risks to improve product reliability. Product Configuration and Change Management - Establishes and maintains product artifact baselines and communicates changes effectively. Systems Thinking - Analyzes linkages and interactions within a system to optimize performance. Technical Documentation - Documents and communicates technical information for productivity improvement and knowledge transfer. Product Development Execution, Monitoring, and Control - Plans, schedules, coordinates, and executes product development activities while ensuring quality and mitigating risks. Behavioral Competencies Collaborates - Builds partnerships and works collaboratively with others to meet shared objectives. Communicates Effectively - Develops and delivers multi-mode communications tailored to different audiences. Decision Quality - Makes timely and informed decisions to maintain progress. Drives Results - Consistently achieves results, even under tough circumstances. Self-Development - Seeks new growth opportunities using formal and informal development channels. Values Differences - Recognizes and values diverse perspectives and cultures within the organization. Qualifications Qualifications, Skills, and Experience: Education, Licenses, Certifications Bachelor's degree in an appropriate STEM field, or equivalent experience, is required. Job Engineering Organization Cummins Inc. Role Category Hybrid Job Type Exempt - Experienced ReqID 2412604 Relocation Package No Show more Show less

Description GPP Database Link (https://cummins365.sharepoint.com/sites/CS38534/) Job Summary Supports customer facing sales force through the rhythm of sales; Lead to close. Executes and supports selected activities under limited supervision. Key Responsibilities Responds both to incoming electronic customer enquiries (e.g. emails, forms) and to customer calls, and engages a more experienced Inside Sales Coordinator if needed. Compiles budgetary quotes for simple jobs by gathering technical data, customer presentations, lead time and others for customer facing sales force. Schedules customer visits and events, gets involved in actual execution and preparation. Receives and processes orders, issues order acknowledgements, invoices and shipping notices for simple jobs. Compiles and communicates order status, inventory status and other associated information to customer facing sales force where the procedure is well documented and repetitive. Assists in resolving of customer issues (including shipment and after sale). Compiles, conducts analyses and reports inventory/stock levels where the procedure is well documented and analysis is repetitive. Actively supports all branch personnel in the sale of products to retail customers, where the task is well documented and repetitive. Responsibilities Competencies: Action oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Channel Awareness - Explains and contextualizes industry structure, dynamics, and path to market in order to advance organizational goals. Account Planning - Identifies objectives to drive execution of business and/or account strategy by reviewing the status relative to where it needs to be and enabling tracking of progress against targets. Adapts to target audience - Explains complex topics (significant technical data, subject matter expertise, etc.) in such a way that the target audience (e.g. sales professionals, customers, training vendors, etc.) can understand, retain, and use the information Integrates Customer Perspective - Incorporates an understanding of the customers' perspective on our products and sales efforts to develop sales content that improves our ability to meet their needs and increase revenue. Sales Forecasting - Collects and assesses customer data from internal and external sources; compares against historical data to determine useful inputs and create a forecast of future consumption patterns. Sales Pipeline Management - Plans proactively for successful execution of account/territory-level sales strategies and plans based on current pipeline; evaluates pipeline health (size, contents, progress); adjusts sales strategy, plans, or high impact activities accordingly; as applicable coaches sellers in order to achieve sales objectives. Sense Making - Through a series of diagnostic and probing questions and research, develops and/or supports an intimate understanding of the customer needs, behaviors, and/or their buying journey. Synthesizes complex information from internal and external resources to deliver tailored solutions for the internal or external customer. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience Relevant Field Sales Experience - 5 to 6 Years Requires some work experience and intermediate level knowledge obtained through training or on-the-job experience. Qualifications Diploma/ BE/B.Tech Job Sales Organization Cummins Inc. Role Category Hybrid Job Type Office ReqID 2411505 Relocation Package No Show more Show less

Description Key Responsibilities: Applies engineering and/or scientific skills to technical processes with support from experienced team members. Participates as a team member, helps define/refine methods, and actively contributes towards team goals. Carries out engineering responsibilities using accepted methods and practical experience. Demonstrates good understanding and applies knowledge of an engineering discipline. Continues to develop capability to create engineering solutions through training and experience. Responsibilities Qualifications: Master of Science, Bachelor of Science, or equivalent technical degree required. This position may require licensing for compliance with export controls or sanctions regulations. Competencies Applies Principles of Statistical Methods: Analyzes technical data using descriptive statistics, probability distributions, graphical analysis, and statistical inference; models relationships between response and independent variables using analysis of variance, regression, and design of experiments to make rigorous, data-based decisions. Product Failure Mode Avoidance: Mitigates potential product failure modes by identifying interfaces, functions, functional requirements, interactions, control factors, noise factors, and prioritized potential failure modes and potential failure causes for the system of interest to effectively and efficiently improve the reliability of Cummins’ products. Product Failure Reporting and Corrective/Preventive Action Systems: Defines and leads a process to record, prioritize, and resolve product failures using cross-functional reviews, rigorous problem-solving methods, failed parts transfer processes, data management tools, and project management practices to effectively and efficiently improve the reliability of the product. Product Problem Solving: Solves product problems using a process that protects the customer; determines the assignable cause; implements robust, data-based solutions; and identifies the systemic root causes and recommended actions to prevent problem reoccurrence. Product Reliability and Reliability Risk Management: Plans and manages critical reliability activities during new product development by preventing failures before hardware, detecting failures before the customer does, and improving products before production in order to release a reliable and durable product; evaluates key technical and program measures to assess the launch readiness of a new product using prescribed indicators, measures, risk scales, and methods of tracking to focus attention on metrics to reduce risk and improve reliability. Quantitative Reliability Analysis: Analyzes failure data from existing and/or new products by establishing failure rate models for use in assessing the feasibility of meeting reliability targets, comparing the reliability of product alternatives, estimating reliability and product coverage costs, identifying emerging issues, or verifying that improvements implemented have had the desired reliability improvement. Reliability Test Planning: Develops and analyzes a test plan acknowledging the relationship among reliability, sample size, distribution parameters, and confidence; develops system-level reliability test plan by considering schedule, number of units, applications, noises, and locations to find unknown failure modes to improve reliability; creates an accelerated test plan by increased use, overstress testing, or combining multiple stresses to build and extrapolate a model to estimate reliability under normal use conditions. Customer Focus: Building strong customer relationships and delivering customer-centric solutions. Global Perspective: Taking a broad view when approaching issues, using a global lens. Values Differences: Recognizing the value that different perspectives and cultures bring to an organization. Qualifications Skills and Knowledge: Knowledge of engine and Genset components, functions, and failure modes. Experience with MS Office tools (Word, PowerPoint, Excel) is preferred. Proficiency in Excel programming (VBA) and Power Pivot is desirable. Familiarity with statistical software packages (e.g., Minitab, Weibull++, Winsmith, JMP, R-Programming) is preferred. Knowledge of engine performance measurement is advantageous. Awareness of warranty data analysis and life data analysis is preferable. Experience in service and quality functions is desirable. Strong analytical skills for handling large datasets and deriving meaningful conclusions. Six Sigma Yellow Belt certification required; Green Belt certification preferred. Experience Basic relevant work experience desired, such as internship, co-op, or other pertinent work experience. This is a Hybrid role. Job Quality Organization Cummins Inc. Role Category Remote Job Type Exempt - Experienced ReqID 2414907 Relocation Package No Show more Show less

Financial Analyst Senior - This is a managerial position overseeing a team of 5–6 direct reports, with responsibility for leading and driving key functional areas. Core Competenices : Financial Reporting - Analyzes financial data by evaluating results and solutions to support business decisions; prepares and presents financial information by summarizing data to communicate results in compliance with regulations and stakeholder expectations; partners with stakeholders to drive financial performance that aligns to organizational goals and strategies. Financial Planning and Forecasting - Utilizes financial forecast data to provide forward looking projections to facilitate decision making; partners with stakeholders to analyze trends and validate assumptions to provide a forecast that aligns to the organization's goals and strategies. Accounts payable end to end process, fixed assets process, understanding treasury functions, statutory audit ,internal audit and any other audits as per the requirement of JV Responsibilities Prepares complex financial analyses and reports for department management. Prepares analyses, reports, and special studies for management. Business partners with organizational unit(s) to develop annual budgets, expense and staffing forecasts, and statistical reporting. Prepares and consolidates financial data statistical reporting, including financial performance, variance explanations, and cost analysis. Coaches or leads less-experienced Financial Analysts. Qualification CA,CMA/CWA with 5-6 years of relevant experience and CA/CWA Intermediate with min7-8 years of experience. Show more Show less

Description Key Responsibilities: Responds to incoming customer calls, emails, qualifies them, and routes the qualified contacts and leads to associated sales professional(s). Compiles budgetary quotes for simple to complicated jobs by gathering technical data, customer presentations, lead time and others for customer facing sales force. Gets involved in customer visits and events, makes decisions where there is no clear procedure outlined. Receives and processes orders, issues order acknowledgements, invoices and shipping notices for simple to complicated jobs. Communicates order status, inventory status and other associated information to customer facing sales force, and identifies any issues. Resolves customer issues where applicable, engages other for resolution where applicable (including shipment and after sale). Periodically reviews and reports inventory/stock levels, takes action and creates orders if needed. Actively supports all branch personnel in the sale of products to retail customers across varying levels of tasks. Responsibilities Competencies: Action oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Channel Awareness - Explains and contextualizes industry structure, dynamics, and path to market in order to advance organizational goals. Account Planning - Identifies objectives to drive execution of business and/or account strategy by reviewing the status relative to where it needs to be and enabling tracking of progress against targets. Adapts to target audience - Explains complex topics (significant technical data, subject matter expertise, etc.) in such a way that the target audience (e.g. sales professionals, customers, training vendors, etc.) can understand, retain, and use the information Integrates Customer Perspective - Incorporates an understanding of the customers' perspective on our products and sales efforts to develop sales content that improves our ability to meet their needs and increase revenue. Sales Forecasting - Collects and assesses customer data from internal and external sources; compares against historical data to determine useful inputs and create a forecast of future consumption patterns. Sales Pipeline Management - Plans proactively for successful execution of account/territory-level sales strategies and plans based on current pipeline; evaluates pipeline health (size, contents, progress); adjusts sales strategy, plans, or high impact activities accordingly; as applicable coaches sellers in order to achieve sales objectives. Sense Making - Through a series of diagnostic and probing questions and research, develops and/or supports an intimate understanding of the customer needs, behaviors, and/or their buying journey. Synthesizes complex information from internal and external resources to deliver tailored solutions for the internal or external customer. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience Requires significant relevant work experience or specialized skills obtained through education, training or on-the-job experience. Qualifications Skills Required:- Primary & Secondary sales Mitwa Connect Fleet connect Job Sales Organization Cummins Inc. Role Category Hybrid Job Type Office ReqID 2415162 Relocation Package Yes Show more Show less

Description The Tax Accountant - Senior is responsible for the preparation and review of complex indirect tax returns, ensuring compliance with tax regulations and supporting audits and litigation activities. This role plays a key part in strategic and operational tax initiatives, including tax automation, team supervision, and collaboration with tax authorities across India. The role requires strong analytical skills, attention to detail, and the ability to lead and coach others. Key Responsibilities Execute complex projects related to the application and interpretation of tax law. Prepare and review complex indirect tax returns and reconciliations. Supervise and coach team members on daily operations and technical tax matters. Research and interpret indirect tax laws to ensure compliance and minimize tax risks. Liaise with tax authorities across Maharashtra and other states for audits and adjudication processes. Support the Indirect Tax Lead on strategic and operational initiatives across PSBU. Drive tax automation and process improvement initiatives across the business. Compile and present periodic updates for tax and business leadership. Support tax audits, compile necessary documentation, address queries, and resolve open issues. Prepare comprehensive reports to support tax positions and provision calculations. Responsibilities Experience: 7-8 years of relevant professional work experience in indirect taxation is required. Experience working in a manufacturing or multinational organization is preferred. Proven ability to manage complex compliance activities and lead teams effectively. Knowledge & Skills In-depth knowledge of Indian indirect tax laws and regulations. Experience in supervising IDT compliances, audits, and litigations. Ability to lead and mentor a team with continuous coaching. Effective liaison with tax authorities and handling of adjudication matters. Strong understanding and execution of tax automation tools and initiatives. Excellent project management skills. 25% travel will be involved to different plant locations and tax offices in and outside Pune. Core Competencies Financial Regulations Acumen: Understanding and applying regulations to ensure compliance. Tax Technical Analysis: Interpreting tax laws, case laws, and regulations accurately. Tax-Based Modeling and Computation: Proficient in tax computation and financial impact analysis. Communicates Effectively: Adapting communication style to diverse audiences. Ensures Accountability: Meeting commitments and holding others to high standards. Action Oriented & Being Resilient: Tackling challenges energetically and bouncing back from adversity. Nimble Learning: Learning through experimentation and adapting quickly. Project Management: Balancing scope, time, and resources to deliver tax-related initiatives. Values Differences: Appreciating diverse perspectives and cultural contributions. Qualifications Qualifications, Skills, and Experience: Education, Licenses, Certifications CWA (Cost and Works Accountant) or CA (Chartered Accountant) or progress toward CA or equivalent certification is preferred. Job Finance Organization Cummins Inc. Role Category Hybrid Job Type Exempt - Experienced ReqID 2414876 Relocation Package No Show more Show less

Description Job Summary: The Electrician Level II is responsible for performing electrical maintenance, troubleshooting, and support activities across manufacturing equipment and plant systems. This role ensures the availability, reliability, and safety of machinery and control systems through proactive maintenance, repairs, and continuous improvement initiatives. Working with limited supervision, the technician applies deep technical knowledge of electrical, control, and mechatronic systems while adhering strictly to safety, quality, and environmental standards. Key Responsibilities Health, Safety & Environment (HSE): Identify and immediately report hazards and incidents. Comply with HSE policies and wear required PPE. Promote a safety-first culture by proactively addressing unsafe conditions and participating in safety audits, risk assessments, LOTO, and training. Quality Maintain high standards of workmanship. Follow maintenance SOPs and quality procedures. Provide feedback for preventive maintenance (PM) plans and conduct equipment failure root cause analysis. Perform inspections and tests to ensure work meets Cummins quality standards. Maintenance & Repair Conduct preventive, corrective, predictive, and emergency maintenance on CNC HMCs and other manufacturing machinery. Troubleshoot electrical, mechanical, hydraulic, pneumatic, coolant, and lubrication systems. Ensure timely documentation of maintenance activities and support spare part planning, procurement, and inventory with the CIP team. Technical Operations Support control system development, sensor applications, and automation upgrades using tools such as Siemens TIA Portal, SCADA, and MES systems. Manage software backups (e.g., IPC Ghost images, PLC/CNC programs). Work on cost-saving and green energy initiatives (I4.0 automation, energy-efficient systems, etc.). Team Collaboration & Continuous Improvement Communicate effectively across maintenance, production, and support teams. Mentor junior team members and document key learnings via SOPs and One Point Lessons. Engage in Kaizen, TPM, and CI activities to drive productivity, safety, and reliability improvements. Responsibilities Competencies: Health and Safety Fundamentals Safety Controls & System Security Electrical System Troubleshooting Factory Automation & Machine Programming Controls Networking & Engineering Knowledge Manufacturing Knowledge & Sensor Technology Collaborates & Communicates Effectively Customer Focus & Drives Results Decision Quality & Nimble Learning Values Differences Required Education, Licenses, And Certifications Minimum: High school diploma or equivalent. Preferred: Diploma or Degree in Mechatronics, Electrical, Electronics, or Controls Engineering. Export control regulations may apply depending on the plant location. Experience Requirements External Candidates: 3–5 years of hands-on experience in electrical and mechanical maintenance in a manufacturing setting, specifically with CNC Horizontal Machining Centers (HMCs). Internal Candidates: 5–10 years of relevant experience, ideally with exposure to ignition SCADA, SQL databases, MES, and TPM systems. Qualifications Key Technical Skills: Industrial Automation & PLC Systems: Siemens (Sinumerik 1, 828), Allen Bradley, Mitsubishi, Fanuc, Omron PLC Programming Tools: TIA Portal V15.1–V19, SIMATIC Manager, RS Logix 500, GX Works Sensors & Instrumentation: Cognex, IFM, Leuze, Zenon, SIGMA Software Digital Communication Protocols: Ethernet/IP, Profibus, Profinet, RS232, CC-Link Drives: Siemens G120, Mitsubishi VFDs CNC Machine Systems: MAG, MAZAK, MAKINO, Desoutter Nut Runners, Nagel Honing, GUDEL Gantry Equipment Knowledge: APCs, ATLAS COPCO tools, VISION systems, washing machines, TOX leak testers, Marposs gauges Additional Tools: CMES, IPC backups, SCADA, MES, calibration tools, laser marking, pump/motor systems Soft Skills Effective communication Team leadership and mentoring Strong documentation and MIS reporting Time and task management under pressure Proactive mindset and self-motivation Working Conditions Flexible to work multiple shifts and overtime. Capable of lifting heavy components and working in confined spaces. Committed to upholding Cummins Safety Policy, TPM, 5S, and continuous improvement culture. Preferred Qualifications Experience in cylinder block/head machining and test cell equipment Exposure to energy conservation initiatives and predictive maintenance techniques Certifications in CNC machining, safety (e.g., OSHA), or industrial automation Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2414948 Relocation Package Yes Show more Show less

Description GPP Database Link (https://cummins365.sharepoint.com/sites/CS38534/) Job Summary Operates machines and production equipment independently in accordance with quality and productivity requirements safely in a manufacturing environment and may instruct or coach others. Key Responsibilities Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Follows all applicable standard work, process documentation and quality procedures such as Statistical Process Control (SPC), poka-yoke and visual standards. Raises issues to minimize cost and quality exposures. Performs quality inspections. Identifies and controls non-conforming material. Delivery Fully proficient with all work processes, independently operating equipment to manufacture and assemble product in order to create the proper characteristics and dimensions necessary to meet customer expectations. Instructs and coaches others and acts as an informal resource for team members with less capability. Achieves production goals. Works at the required cycle time or defined engineering standard. Maintains clean and orderly work area, including routine housekeeping tasks and machine cleaning tasks and performs planned operator care and maintenance tasks. Remains flexible and performs other miscellaneous duties, as required, to meet production goals. Works with peers, skilled trades and support staff to maintain and identify equipment needing repair. Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively in ways to improve quality, safety, process, material flow, and employee development. Responsibilities Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Courage - Stepping up to address difficult issues, saying what needs to be said. Decision quality - Making good and timely decisions that keep the organization moving forward. Drives results - Consistently achieving results, even under tough circumstances. Ensures accountability - Holding self and others accountable to meet commitments. Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience Requires significant relevant work experience or specialized skills obtained through education, training or on-the-job experience. Qualifications Experience details Experience in production field, manpower handling, knowledge of QMS and SCM Preferred From – HT/LV Motor And Generator Industries Experience in material stock counting and store management. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2415584 Relocation Package Yes Show more Show less

Description Coordinates documents and gathers and inputs data related to assigned administrative support duties for a team, department, function, or other organizational leader/group. Completes work with a limited degree of supervision. Key Responsibilities Direct Sales: Handle inbound, unsolicited prospect calls and convert these opportunities into sales. Develop opportunities to sell company products and services by developing leads via telephone or other technologies and/or cold-calling prospects generated by external sources. Drive additional sales through follow-up calls or emails to existing customers for repeat business, cross-selling, and up-selling. Conduct negotiations according to company guidelines. Achieve revenue and margin targets. Ensure customer satisfaction through the use of the Cummins Sales Process and execution of the sales cycle from lead to sale. Sales Support Create and deliver qualified leads to sales representatives where appropriate. Assist the salesforce with quotation/RFP management and other sales cycle operations as needed. Build and/or maintain positive customer relationships that generate loyalty and/or future sales. Support negotiations according to company guidelines. Assist with accounts receivables. Answer more complex, escalated internal and sales customer inquiries promptly and accurately. Analyze customer inquiries to identify recurring user problems and recommend solutions. Provide additional support to more complex accounts or for customer questions requiring extensive research. Enter new customer data and update changes to existing accounts in the corporate database. Support setting up new customer accounts per Cummins' guidelines. Maintain accurate sales entry, reporting, and forecasting through the utilization of Cummins tools and processes. Seek opportunities to utilize processes, procedures, and initiatives designed to grow the business and increase customer value and loyalty. Ensure correct utilization of relevant company processes, systems, and procedures by Inside Sales. Evaluate results and recommend improvements. Assure good communication and coordination across the Sales function and other departments in support of customer satisfaction, sales goals, and Cummins culture goals. Coordinate input from sales staff to develop proactive communications to customers. Ensure dealers' claims are processed timely and all actions by dealerships are in place. Plan, prioritize, and schedule Inside Sales activities and resources to ensure continuity of service. Mentor and develop Inside Sales staff to ensure that sales support targets are met. Administrative Support Conduct research, prepare statistical reports, and address routine to complex information requests. Gather, compile, and verify information and enter it accurately into documents such as reports, presentations, or forms; and office systems such as databases or spreadsheets. Complete data collection, data entry, and report generation on various departmental related activities. Perform associate functions such as preparing correspondence, receiving visitors, arranging conference calls, and scheduling meetings. Respond to, or redirect, routine to complex inquiries from external or internal sources about the organization/department, its activities, or processes. Prepare documentation for payment of vendors, suppliers, and other third parties as applicable. Submit documentation and enter requests for payments into the accounting system. Respond to inquiries from accounts payable and payees. Document and maintain departmental policies and procedures. Participate as a team member on departmental related business improvement assignments and projects as needed. Perform other routine to complex administrative activities as needed per the established procedures of the organization and/or department. Act as an informal resource for colleagues with less experience. Responsibilities Qualifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Competencies Values Differences: Recognizing the value that different perspectives and cultures bring to an organization. Action Oriented: Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Communicates Effectively: Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer Focus: Building strong customer relationships and delivering customer-centric solutions. Ensures Accountability: Holding self and others accountable to meet commitments. Plans and Aligns: Planning and prioritizing work to meet commitments aligned with organizational goals. Data Analytics: Discovering, interpreting, and communicating qualitative and quantitative data to enable data-driven business decisions. Data Communication and Visualization: Constructing a narrative of the business problem, root cause, solution options, and opportunities through data visualization. Project Schedule Management: Managing the planned schedule using recommended tools and processes to drive completion within the agreed timeline. Adapts to Target Audience: Explaining complex topics in a way that the target audience can understand, retain, and use the information. Integrates Customer Perspective: Incorporating an understanding of the customers' perspective to develop sales content that improves our ability to meet their needs and increase revenue. Qualifications Experience: Requires significant relevant work experience or specialized skills obtained through education, training, or on-the-job experience. Job Sales Organization Cummins Inc. Role Category Hybrid Job Type Office ReqID 2409816 Relocation Package No Show more Show less

Description The Customer Order Management Representative Level IV acts as an extension of management, ensuring a seamless and proactive customer experience. This role is responsible for managing complex customer accounts, improving order-to-cash processes, and mentoring team members. The representative also supports strategic initiatives, customer visits, and training, while maintaining compliance with export and quality standards. Key Responsibilities Manage assigned customer accounts throughout the full order life cycle, including setup, order entry/modification, escalations, and logistics coordination. Serve as the primary point of contact for customers, distribution centers, manufacturing plants, and internal departments. Resolve complex customer inquiries through in-depth research and cross-functional collaboration. Ensure compliance with export policies and prepare all required shipping documentation. Submit and track quality claims (Material/Process Non-Conformance) via the Quality Management System. Support and host customer visits at local facilities. Develop, prepare, and distribute both standard and customized reports for internal and external stakeholders. Coach and mentor team members on order management policies, systems, and best practices. Lead departmental initiatives aimed at enhancing customer support and operational efficiency. Maintain accurate records of all customer interactions and transactions in the system. Responsibilities Qualifications Degree in a related field preferred. This position may require licensing for compliance with export controls or sanctions regulations. Core Competencies Communicates Effectively – Delivers clear, audience-specific communication. Customer Focus – Builds strong relationships and delivers tailored solutions. Drives Results – Consistently meets goals, even under pressure. Collaborates – Works effectively across teams and departments. Self-Development – Pursues continuous learning and growth. Values Differences – Embraces diverse perspectives and cultures. Functional Competencies Customer Support – Understands the full order life cycle and its impact on customer satisfaction. Order Processing – Manages order entry, modifications, and exception handling. Order Life Cycle Systems Knowledge – Navigates and utilizes order management systems efficiently. Time Management – Prioritizes tasks to meet deadlines and business objectives. Attention to Detail – Ensures accuracy in data entry and documentation. Computer Literacy – Proficient in Microsoft Office (Excel, Word, PowerPoint, Outlook) and ERP/CRM systems. Qualifications Experience Minimum 3 years of experience in customer order management, account management, or supply chain operations. Proven experience in handling complex customer accounts and mentoring team members. Strong background in customer service, logistics coordination, or export documentation is a plus. 5 PM to 2 AM IST Shift Job Supply Chain Planning Organization Cummins Inc. Role Category Hybrid Job Type Office ReqID 2415412 Relocation Package No Show more Show less

Description The Customer Order Management Representative Level III plays a critical role in managing the end-to-end customer order life cycle. Working under minimal supervision, this role uses analytical and collaborative skills to align supply and demand, enhance customer satisfaction, and reduce the order-to-cash cycle. The position supports global customers and internal teams, ensuring timely and accurate order fulfillment while complying with export and quality standards. Key Responsibilities Manage assigned customer accounts throughout the entire order life cycle—from setup to delivery and post-sales support. Act as the primary point of contact for customers, distribution centers, and manufacturing plants. Process and modify customer orders, ensuring accuracy and timely fulfillment. Resolve complex customer inquiries through research and cross-functional collaboration. Ensure compliance with export regulations and prepare necessary shipping documentation. Submit and track quality claims (e.g., Material or Process Non-Conformance) via the Quality Management System. Support customer visits and audits at local facilities. Prepare and distribute internal and customer-facing reports. Maintain accurate records of all interactions and transactions in the system. Serve as a Quality Management Systems Champion or Subject Matter Expert. Contribute to departmental goals and continuous improvement initiatives. Responsibilities Qualifications Degree in a related field preferred. This position may require licensing for compliance with export controls or sanctions regulations. Core Competencies Communicates Effectively – Adapts communication style to various audiences. Customer Focus – Builds strong relationships and delivers tailored solutions. Drives Results – Achieves goals consistently, even under pressure. Collaborates – Works well across teams to meet shared objectives. Self-Development – Seeks growth opportunities through formal and informal learning. Values Differences – Embraces diverse perspectives and cultures. Functional Competencies Customer Support – Understands the full order life cycle and its impact on customer satisfaction. Order Processing – Manages order entry, modifications, and exception handling. Order Life Cycle Systems Knowledge – Navigates order management systems efficiently. Project and Time Management – Prioritizes tasks to meet deadlines and business goals. Attention to Detail – Ensures accuracy in data entry and documentation. Computer Literacy – Proficient in Microsoft Office (Excel, Word, PowerPoint, Outlook) and ERP/CRM systems. Qualifications Experience Minimum 2 years of experience in customer order management, account management, or supply chain operations. Experience working in a global or shift-based environment is preferred. Strong background in customer service, logistics coordination, or export documentation is a plus. Shift: 5:00 PM to 2:00 AM IST Job Supply Chain Planning Organization Cummins Inc. Role Category Hybrid Job Type Office ReqID 2415414 Relocation Package No Show more Show less

Description The Customer Order Management Representative Level III plays a critical role in managing the end-to-end customer order life cycle. Working under minimal supervision, this role uses analytical and collaborative skills to align supply and demand, enhance customer satisfaction, and reduce the order-to-cash cycle. The position supports global customers and internal teams, ensuring timely and accurate order fulfillment while complying with export and quality standards. Key Responsibilities Manage assigned customer accounts throughout the entire order life cycle—from setup to delivery and post-sales support. Act as the primary point of contact for customers, distribution centers, and manufacturing plants. Process and modify customer orders, ensuring accuracy and timely fulfillment. Resolve complex customer inquiries through research and cross-functional collaboration. Ensure compliance with export regulations and prepare necessary shipping documentation. Submit and track quality claims (e.g., Material or Process Non-Conformance) via the Quality Management System. Support customer visits and audits at local facilities. Prepare and distribute internal and customer-facing reports. Maintain accurate records of all interactions and transactions in the system. Serve as a Quality Management Systems Champion or Subject Matter Expert. Contribute to departmental goals and continuous improvement initiatives. Responsibilities Qualifications Degree in a related field preferred. This position may require licensing for compliance with export controls or sanctions regulations. Core Competencies Communicates Effectively – Adapts communication style to various audiences. Customer Focus – Builds strong relationships and delivers tailored solutions. Drives Results – Achieves goals consistently, even under pressure. Collaborates – Works well across teams to meet shared objectives. Self-Development – Seeks growth opportunities through formal and informal learning. Values Differences – Embraces diverse perspectives and cultures. Functional Competencies Customer Support – Understands the full order life cycle and its impact on customer satisfaction. Order Processing – Manages order entry, modifications, and exception handling. Order Life Cycle Systems Knowledge – Navigates order management systems efficiently. Project and Time Management – Prioritizes tasks to meet deadlines and business goals. Attention to Detail – Ensures accuracy in data entry and documentation. Computer Literacy – Proficient in Microsoft Office (Excel, Word, PowerPoint, Outlook) and ERP/CRM systems. Qualifications Experience Minimum 2 years of experience in customer order management, account management, or supply chain operations. Experience working in a global or shift-based environment is preferred. Strong background in customer service, logistics coordination, or export documentation is a plus. Job Supply Chain Planning Organization Cummins Inc. Role Category Hybrid Job Type Office ReqID 2415413 Relocation Package No Show more Show less

Description Key Responsibilities: Contribute to the creation of technical specifications for applications, infrastructure, or complete solutions. Assist in technical analysis of potential solutions, evaluating the technical fit and viability of commercial off-the-shelf products versus custom-built solutions. Deliver solution designs, adhering to standards and leveraging re-use of components. Create high-level and detailed designs of infrastructure or applications, interfaces, conversions, extensions, reports, and workflows while meeting architecture, security, performance, scalability, and maintainability requirements. Assist technical and infrastructure groups in understanding the solution design and specifications. Participate in formal design reviews and code reviews to ensure detailed design specifications are understood and coding standards are adhered to. Leverage re-usability of component designs to reduce costs and shorten time to deliver solutions. Ensure efficiency in the build and deploy processes, leveraging automation where possible. Assist in the test strategy and execution of the master test plan. Contribute to the creation of standards, processes, procedures, and guidelines for the IT design and development community, as well as work instructions or ‘runbooks’ used for end-user support. Analyze and revise existing systems and documentation to identify remediation or improvements in the application or infrastructure solution. Provide level 3 support for critical issues. Work closely with IT technical service providers to ensure outsourced work packages are delivered to specifications, meeting key parameters of quality, schedule, cost, security, performance, and scalability. Responsibilities Qualifications: College, university, or equivalent degree in Computer Science, Information Technology, Business, or related subject, or relevant equivalent experience required. This position may require licensing for compliance with export controls or sanctions regulations. Competencies Collaborates: Building partnerships and working collaboratively with others to meet shared objectives. Customer Focus: Building strong customer relationships and delivering customer-centric solutions. Interpersonal Savvy: Relating openly and comfortably with diverse groups of people. Plans and Aligns: Planning and prioritizing work to meet commitments aligned with organizational goals. Tech Savvy: Anticipating and adopting innovations in business-building digital and technology applications. Solution Configuration: Configures, creates, and tests solutions for commercial off-the-shelf (COTS) applications using industry standards and tools, version control, and build and test automation to meet business, technical, security, governance, and compliance requirements. Solution Design: Creates and defines solution designs complete with instrumentation and measurement, using industry standards and tools, version control, and build and test automation to synthesize diagrams, models, and documentation to build solutions that meet buildability, business, technical, security, governance, and compliance requirements. Solution Functional Fit Analysis: Composes and decomposes systems into component parts using procedures, tools, and work aides to study how well the component parts were designed, purchased, and configured to interact holistically to meet business, technical, security, governance, and compliance requirements. Solution Modeling: Creates, designs, and formulates models, diagrams, and documentation using industry standards, tools, version control, and build and test automation to meet business, technical, security, governance, and compliance requirements. Solution Validation Testing: Validates configuration item changes or solutions using the Function's defined best practices, including the Systems Development Life Cycle (SDLC) standards, tools, and metrics, to ensure they work as designed and meet customer requirements. Values Differences: Recognizing the value that different perspectives and cultures bring to an organization. Qualifications Skills and Experience Needed: 3-5 years of experience. Proficiency in SQL, DAX, M Query, and Python. Familiarity with C# and R (TensorFlow, PyTorch, and NumPy would be a plus). Experience with Azure and Databricks. Experience with data pipeline development, maintenance, and improvement with Azure DataLake. Experience with SSIS (SQL Server Integration Services), SSAS (SQL Server Analysis Services), and Power BI Service. Experience in developing, maintaining, optimizing, automating, and supporting Power BI reports. Experience in data mining, data auditing, and data insight generation. Understanding of AI (Artificial Intelligence)/ML (Machine Learning) concepts and tools in Databricks. Strong technical writing skills for documentation and communication. Knowledge of cybersecurity principles and practices. Knowledge in data governance and knowledgebase management techniques. Proficiency with Agile tools like Jira and Confluence for project management and collaboration. Proficiency in optimizing SSIS, SSAS, AAS (Azure Analytics Services), and Databricks workflows for performance of large datasets. Job Systems/Information Technology Organization Cummins Inc. Role Category Hybrid Job Type Exempt - Experienced ReqID 2414670 Relocation Package No Show more Show less

Description Key Responsibilities Lead the design, development, and deployment of Oracle Fusion SaaS solutions, particularly in Supply Chain and Finance. Build and maintain integrations using Oracle Integration Cloud (OIC), REST/SOAP web services, and middleware tools. Customize and extend Fusion applications using BI Publisher, OTBI, FBDI, HDL, and ADF. Translate business requirements into technical specifications and detailed solution designs. Support the full development lifecycle including change management, documentation, testing, and deployment. Participate in formal design/code reviews and ensure adherence to coding standards. Collaborate with IT service providers to ensure quality, performance, and scalability of outsourced work. Provide Level 3 support for critical technical issues. Stay current with emerging Oracle technologies and contribute to continuous improvement initiatives. Responsibilities Qualifications Bachelor’s degree in Computer Science, Information Technology, Business, or a related field (or equivalent experience). Relevant certifications in Oracle Fusion or related technologies are a plus. Compliance with export controls or sanctions regulations may be required. Core Competencies Customer Focus – Builds strong relationships and delivers customer-centric solutions. Global Perspective – Applies a broad, global lens to problem-solving. Manages Complexity – Navigates complex information to solve problems effectively. Manages Conflict – Resolves conflicts constructively and efficiently. Optimizes Work Processes – Continuously improves processes for efficiency and effectiveness. Values Differences – Embraces diverse perspectives and cultures. Technical Competencies Solution Design & Configuration – Designs scalable, secure, and maintainable solutions. Solution Functional Fit Analysis – Evaluates how well components interact to meet business needs. Solution Modeling & Validation Testing – Creates models and tests solutions to ensure they meet requirements. Performance Tuning & Data Modeling – Optimizes application and database performance. Qualifications Experience 5+ years of hands-on experience in Oracle Fusion SaaS development and technical implementation. Proven experience with Oracle Fusion Supply Chain and Finance modules. Intermediate level of relevant work experience (3–5 years minimum). Skills & Technical Expertise Strong knowledge of Oracle SaaS architecture, data models, and PaaS extensions. Proficiency in Oracle Integration Cloud (OIC), REST/SOAP APIs. Experience with Oracle tools: BI Publisher, OTBI, FBDI, HDL, ADF. Ability to analyze and revise existing systems for improvements. Familiarity with SDLC, version control, and automation tools. Job Systems/Information Technology Organization Cummins Inc. Role Category Hybrid Job Type Exempt - Experienced ReqID 2415084 Relocation Package No Show more Show less

Description Key Responsibilities Analyze and evaluate Oracle SaaS application functionality to recommend improvements and increase utilization of standard features. Configure and verify application setup to meet business and functional requirements. Conduct functional fit-gap analysis and recommend solutions to address application limitations. Collaborate with business process owners, analysts, and IT teams to gather and document requirements and translate them into functional designs. Serve as a subject matter expert for Oracle SaaS Supply Chain modules and related business processes. Develop and maintain strong vendor relationships to resolve issues and enhance application functionality. Create and manage functional specifications for development and configuration. Stay current with emerging trends in Oracle SaaS and recommend relevant innovations. Support testing, validation, and deployment of application changes and enhancements. Responsibilities Qualifications Bachelor’s degree in Computer Science, Information Technology, Business, or a related field (or equivalent experience). Relevant certifications in Oracle SaaS or Supply Chain Management are a plus. May require licensing for compliance with export controls or sanctions regulations. Core Competencies Business Insight: Understands business operations and aligns IT solutions accordingly. Customer Focus: Builds strong relationships and delivers customer-centric solutions. Global Perspective: Applies a global lens to problem-solving and decision-making. Manages Complexity: Navigates complex information to solve problems effectively. Manages Conflict: Resolves issues constructively and diplomatically. Optimizes Work Processes: Continuously improves processes for efficiency and effectiveness. Tech Savvy: Embraces and applies digital innovations. Values Differences: Appreciates diverse perspectives and fosters inclusive collaboration. Qualifications Experience Minimum 5 years of hands-on experience in Oracle SaaS implementation or support. Experience with Oracle SaaS Supply Chain modules: Order Management, Procurement, Inventory, Supply Planning, and Global Order Promising. Familiarity with Oracle Financials (Accounts Payable, Accounts Receivable, General Ledger) and OTBI reporting. Experience with testing automation tools in Oracle SaaS is desirable. Skills & Technical Knowledge Strong understanding of Oracle SaaS architecture and integration capabilities. Deep process knowledge in Order to Cash and Procure to Pay cycles. Ability to configure, test, and validate Oracle SaaS solutions. Proficiency in solution design, modeling, and functional fit analysis. Strong documentation and specification writing skills. Job Systems/Information Technology Organization Cummins Inc. Role Category Hybrid Job Type Exempt - Experienced ReqID 2415053 Relocation Package No Show more Show less

Description Key Responsibilities Lead the design, development, and deployment of Oracle Fusion SaaS solutions, particularly in Supply Chain and Finance. Build and maintain integrations using Oracle Integration Cloud (OIC), REST/SOAP web services, and middleware tools. Customize and extend Fusion applications using BI Publisher, OTBI, FBDI, HDL, and ADF. Translate business requirements into technical specifications and detailed solution designs. Support the full development lifecycle including change management, documentation, testing, and deployment. Participate in formal design/code reviews and ensure adherence to coding standards. Collaborate with IT service providers to ensure quality, performance, and scalability of outsourced work. Provide Level 3 support for critical technical issues. Stay current with emerging Oracle technologies and contribute to continuous improvement initiatives. Responsibilities Qualifications Bachelor’s degree in Computer Science, Information Technology, Business, or a related field (or equivalent experience). Relevant certifications in Oracle Fusion or related technologies are a plus. Compliance with export controls or sanctions regulations may be required. Core Competencies Customer Focus – Builds strong relationships and delivers customer-centric solutions. Global Perspective – Applies a broad, global lens to problem-solving. Manages Complexity – Navigates complex information to solve problems effectively. Manages Conflict – Resolves conflicts constructively and efficiently. Optimizes Work Processes – Continuously improves processes for efficiency and effectiveness. Values Differences – Embraces diverse perspectives and cultures. Technical Competencies Solution Design & Configuration – Designs scalable, secure, and maintainable solutions. Solution Functional Fit Analysis – Evaluates how well components interact to meet business needs. Solution Modeling & Validation Testing – Creates models and tests solutions to ensure they meet requirements. Performance Tuning & Data Modeling – Optimizes application and database performance. Qualifications Skills & Technical Expertise Strong knowledge of Oracle SaaS architecture, data models, and PaaS extensions. Proficiency in Oracle Integration Cloud (OIC), REST/SOAP APIs. Experience with Oracle tools: BI Publisher, OTBI, FBDI, HDL, ADF. Ability to analyze and revise existing systems for improvements. Familiarity with SDLC, version control, and automation tools. Experience 5+ years of hands-on experience in Oracle Fusion SaaS development and technical implementation. Proven experience with Oracle Fusion Supply Chain and Finance modules. Intermediate level of relevant work experience (3–5 years minimum). Job Systems/Information Technology Organization Cummins Inc. Role Category Hybrid Job Type Exempt - Experienced ReqID 2415054 Relocation Package No Show more Show less

Description Key Responsibilities: Responds to incoming customer calls, emails, qualifies them, and routes the qualified contacts and leads to associated sales professional(s). Compiles budgetary quotes for simple to complicated jobs by gathering technical data, customer presentations, lead time and others for customer facing sales force. Gets involved in customer visits and events, makes decisions where there is no clear procedure outlined. Receives and processes orders, issues order acknowledgements, invoices and shipping notices for simple to complicated jobs. Communicates order status, inventory status and other associated information to customer facing sales force, and identifies any issues. Resolves customer issues where applicable, engages other for resolution where applicable (including shipment and after sale). Periodically reviews and reports inventory/stock levels, takes action and creates orders if needed. Actively supports all branch personnel in the sale of products to retail customers across varying levels of tasks. Responsibilities Competencies: Action oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Channel Awareness - Explains and contextualizes industry structure, dynamics, and path to market in order to advance organizational goals. Account Planning - Identifies objectives to drive execution of business and/or account strategy by reviewing the status relative to where it needs to be and enabling tracking of progress against targets. Adapts to target audience - Explains complex topics (significant technical data, subject matter expertise, etc.) in such a way that the target audience (e.g. sales professionals, customers, training vendors, etc.) can understand, retain, and use the information Integrates Customer Perspective - Incorporates an understanding of the customers' perspective on our products and sales efforts to develop sales content that improves our ability to meet their needs and increase revenue. Sales Forecasting - Collects and assesses customer data from internal and external sources; compares against historical data to determine useful inputs and create a forecast of future consumption patterns. Sales Pipeline Management - Plans proactively for successful execution of account/territory-level sales strategies and plans based on current pipeline; evaluates pipeline health (size, contents, progress); adjusts sales strategy, plans, or high impact activities accordingly; as applicable coaches sellers in order to achieve sales objectives. Sense Making - Through a series of diagnostic and probing questions and research, develops and/or supports an intimate understanding of the customer needs, behaviors, and/or their buying journey. Synthesizes complex information from internal and external resources to deliver tailored solutions for the internal or external customer. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience Requires significant relevant work experience or specialized skills obtained through education, training or on-the-job experience. Qualifications Skills Required:- Achieve sales AOP for the assigned territory of NER and NCR Achieve Receivable target and bring it below 10% Grow business across the territory and add new contracts Ensure smooth execution of existing contracts and support the KAM Ensure follow up and streamline SD, EMD collection Should be having Diploma or Degree in engineering with 3-5 yrs experience Good communication and negotiation skills Railway industrial experience and Government client management experience would be added advantage. Job Sales Organization Cummins Inc. Role Category Hybrid Job Type Office Min Salary $ Max Salary $ ReqID 2414925 Relocation Package Yes Show more Show less