20 Culturing Jobs

Walk In Drive For Microbiology Department In Formulation Division @ Kothur Department :- Microbiology Qualification :- BSC | MSC - (Microbiology| Biotechnology | Biochemistry ) Experience :- 2 to 6 Years Division :- Formulation Interview Date:- 13-09-2025 Interview Time:- 9.00AM TO 2.00PM Work Location :- MSNF-II, Kothur Venue Location:- MSNF-II, Kothur Survey Nos.1277 & 1319 to 1324, Nandigama (Village), Kothur (Mandal, Mahbubnagar, Telangana 509001) Note:- Candidate should bring Update Resume , Certificates, Aadhaar Card & Pan Card About Company:- MSN Group is the fastest growing research-based pharmaceutical company based out of India. Founded in 2003 with a mission to make health care affordable, this Hyderabad-based venture has Fifteen API and Six finished dosage facilities established across India & USA. The group has an integrated R&D center for both API and formulation under one roof, dedicated to research and development of pharmaceuticals to make them more accessible. With core focus on speed and consistency in delivery, MSN has achieved the following: More than 900+ national and international patents Product portfolio featuring over 450 + APIs 300+ Formulations, covering over 35 major therapies Won the trust of more than 40 Million patients across 80+ countries globally Innovation and speed form the crux of our business strategy. Backed by a dedicated and experienced team of over 14,000 the organizational environment at MSN integrates multiple disciplines and functions by effective implementation of goals and objectives through technology, coupled with Integrity, Imagination and Innovation.

1. Position: MD Pathologist Location: Parel, Kamala Mills Openings: 2 Part-Time (Morning & Evening Shift) Male candidates preferred 1 Full-Time (11:00 AM8:00 PM or 12:00 Noon–9:00 PM) – Male candidate preferred Job Overview: We are hiring an experienced MD Pathologist to lead diagnostic operations and ensure quality assurance across Haematology, Biochemistry, Clinical Pathology, and Serology. Responsibilities: Supervise lab workflows and ensure protocol compliance Review and validate test reports; request retests when needed Monitor turnaround times and uphold quality standards Train and assess lab staff; identify and address skill gaps Resolve non-conformities and implement corrective actions Guide clinicians on test selection and interpretation Approve test methods and ensure ethical lab practices 2. Position: MD Cardiologist (Part-Time) Location: Parel, Kamala Mills Job Overview: We are seeking a skilled Cardiologist to perform and report on essential cardiac diagnostic procedures. Responsibilities: Conduct 2D Echo, TMT, and ECG tests Accurately interpret and report findings Support clinical teams in cardiac diagnosis and care 3. Position: Molecular Biologist & Medical Geneticist (Part-Time) Location: Parel, Kamala Mills Job Overview: We are looking for a qualified Molecular Biologist and Medical Geneticist to lead molecular diagnostics and genetic counseling. Responsibilities: Perform DNA/RNA extraction, PCR, qPCR, and sequencing Interpret molecular and genomic data for clinical relevance Diagnose hereditary conditions and provide genetic counseling Oversee cytogenetic workflows and ensure regulatory compliance Train lab staff and collaborate with clinical teams Maintain biosafety and quality standard. 4. Position: Microbiologist (Full-Time) Location: Parel, Kamala Mills Job Overview: We are hiring a qualified Microbiologist to conduct testing and analysis of clinical, environmental, or food samples. Responsibilities: Identify and classify microorganisms (bacteria, viruses, fungi) Analyze and report microbiological data Maintain lab equipment and ensure SOP compliance Monitor contamination risks and implement corrective actions Would you like me to format these into a flyer or help draft application instructions next?

Role Description We are seeking a detail-oriented and analytical professional to join our team as an AVP responsible for performing balance sheet spreading of corporate clients using the BARS (Balance Sheet Analysis and Reporting System) tool . This role is critical in supporting credit risk assessment and financial analysis processes. Lending Operations team is responsible in managing Lifecycle events on Syndicated Loan Deals, which provides Middle Office and Back Office support to Corporate and Investment banking divisions of the bank. The team is also involved in various aspects of recording and maintaining all Middle and Operational Roles of Loan Life Cycle includes trade support, trade documentation, trade settlements, cash reconciliation, Drawdown, Re-pricing, Payment. Team works closely with stakeholders in the Finance, Credit and technology divisions for multiple business lines such as Distressed Product Group (DPG), Commercial Real Estate (CRE) Global Credit Trading (GCT), Credit Solutions Group (CSG), and Structured Trade & Export Finance (STEF) etc. The role is demanding, complex & critical in nature and requires interaction with Front Office, Business, CRM Finance, Sales, Agent Bank and Clients. Your key responsibilities Background in Accounting and financial statement. Strong organisational skills; ability to identify and prioritise multiple tasks based on criticality, impact and franchise importance. Exceptional communication skills verbal, written and presentation. Independent problem solver who demonstrates accountability as well as execution capability. Ability to independently coordinate and manage work requirements across multiple business areas and functions. Ability to work in a fast-paced, highly regulated environment. Ability to connect with people as well as desire to learn process flows. Dedication to servicing a demanding internal and external client base. Should able to contribute as individual contributor as well. Accurately spread financial statements (balance sheet, and income statement) of corporate clients into the BARS system. Analyze financial data to ensure consistency, accuracy, and completeness. Collaborate with credit officers and relationship managers to clarify financial inputs and resolve discrepancies. Maintain documentation and audit trails for all financial spreads. Ensure compliance with internal policies, regulatory requirements, and data quality standards. Support periodic reporting and data validation exercises. Maintains the highest level of confidentiality with all information obtained. Meets expectations for attendance and punctuality. Manage the daily operations of the department in an efficient and effective manner Establish and maintain an efficient and productive working environment within the department based on continuous and effective staff communication. Participates in the review and recommendations of operational systems and procedures Communicate with management team to coordinate system and control activities Your skills and experience Considering the demanding, complex & critical nature of the role and able to work in fast passed environment with consistent deadlines, candidates should meet the below requirements. Bachelors degree in finance, Accounting, or a related field. German Language proficiency B1 and above Strong understanding of financial statements and accounting principles. Proficiency in Microsoft Excel; experience with BARS or similar financial spreading tools is a plus. 12+ years of experience in financial analysis, credit risk, or a similar role. High attention to detail and accuracy. Strong communication and collaboration skills. Excellent verbal & written communication along with dynamic & confident approach. Flexible with Shift. Ability to implement tasks and projects with minimal supervision. Team player who fosters team spirit in a global setting.

Roles and Responsibilities Should have Hands on Experience in Handling the Microbiology Tastings/Pathogens Testing's at Quality Control Laboratory. Should have basic knowledge of Media Preparations, Discarding, Environment Monitoring, Swabs Testing's. Should have basic knowledge of CGMP, GLP, GHP. Documentation with Hands on Experience of SAP QA Module. Conduct microbiological testing, including bet, MLT, sterility testing, water analysis, and environmental monitoring. Desired Candidate Profile Proficiency in performing microbiological tests according to established protocols. Strong understanding of microbial culture techniques, microorganism identification methods, and quality control principles. Only Male Candidates required for this position.

Job Summary: As a technical expert and primary point of contact for customers, the Engine Field Service Technician Level III is responsible for diagnosing and executing complex repairs and maintenance on Cummins engine products at customer sites. The role demands strong problem-solving, technical, and communication skills, as well as the ability to work independently under minimal supervision. The technician also supports junior team members through coaching and technical guidance, while upholding safety, documentation, and quality standards. Key Responsibilities: Serve as the primary contact for customers, ensuring responsive and professional field service support. Conduct complex diagnostics and execute repairs using specialized tools, procedures, and Cummins standards. Perform scheduled preventative maintenance on engines and related components in the field. Escalate unresolved technical issues to product specialists or supervisors when necessary. Provide guidance, coaching, and knowledge sharing with junior technicians or apprentices. Accurately complete documentation such as service worksheets, timesheets, warranty claims, and quality forms using business systems. Identify and report additional service or sales opportunities to customers. Maintain tools and service vehicle in proper working order and cleanliness. Ensure full compliance with all Cummins and legal Health, Safety & Environmental (HSE) standards, report incidents or risks promptly. Participate in required technical training aligned with job and business needs. External Qualifications and Competencies Competencies: Communicates Effectively: Clearly conveys technical information to different audiences. Customer Focus: Builds and sustains strong customer relationships. Develops Talent: Supports the development of junior technicians and team members. Manages Complexity: Solves intricate technical issues using data and experience. Manages Conflict: Resolves disagreements professionally and productively. Self-Development: Takes ownership of continuous learning and skill improvement. Health and Safety Fundamentals: Actively promotes and upholds HSE standards. Diagnostics Application: Uses tools and methods to isolate faults and validate repairs. Electronic Service Tool Application: Utilizes hardware/software tools for diagnostics and repairs. Engine Systems Interaction: Understands electrical and mechanical subsystems and their interdependencies. Product Repair and Maintenance: Performs disassembly, inspection, and reassembly of engines using standard tools and practices. Service Documentation: Maintains detailed and accurate service records. Technical Escalation: Identifies issues requiring advanced expertise and ensures seamless knowledge transfer. Values Differences: Respects and leverages diverse backgrounds and perspectives. Education, Licenses, Certifications: Vocational diploma or certification from a relevant technical institution. Apprentice Trained Engine Technician certification preferred. Valid local driving license required. Licensing for export control or sanctions compliance may be required, depending on location. Additional Responsibilities Unique to this Position Skills & Experience Required: Significant hands-on experience in field servicing of engine products. In-depth knowledge of Cummins engines or similar power systems. Proven ability to manage technical service tasks independently at customer sites. Prior experience in customer-facing roles preferred. Experience mentoring or training junior technicians is desirable. Strong troubleshooting and fault-isolation capabilities using diagnostic tools. Additional Internal Qualifications (for internal candidates): Location: Role based at Sibsagar, Assam. Educational Requirement: Diploma in Electrical/Electronic Engineering. Minimum Experience: At least 3 years of field service experience. Must be flexible and available for extensive field work, including travel and irregular hours. Mandatory adherence to Cummins safety, quality, and compliance standards.

As a Microbiologist, you will be responsible for conducting experiments to study various microorganisms such as bacteria, viruses, and fungi in controlled laboratory settings. Your role will involve investigating the interactions between microorganisms and human, animal, or plant systems, and performing genetic, biochemical, and microbiological analyses of samples. Additionally, you will develop methods for isolating, identifying, and cultivating microorganisms. You will be tasked with analyzing results from microbiological tests and research to identify patterns and implications. It will be essential to maintain accurate records of research findings, including laboratory notes, test results, and statistical data, while utilizing advanced software and technologies for data analysis and interpretation. In this position, you will grow and maintain microbial cultures under various conditions to identify new strains or pathogens. This includes preparing culture media and reagents for microbiological experiments and using microscopes, petri dishes, and other lab equipment to study microorganisms. Ensuring compliance with safety standards and laboratory protocols, especially when handling pathogenic microorganisms, will be a crucial aspect of your role. You will also develop and implement quality control measures to guarantee the accuracy and reliability of test results, as well as supervise laboratory technicians and assistants. Your responsibilities will also involve preparing detailed reports and research papers for publication in scientific journals or internal use. You will communicate your findings to colleagues, clients, or stakeholders through presentations and meetings, as well as assist in the preparation of grants and funding proposals for future research projects. Collaboration with other scientists, clinicians, or regulatory bodies to contribute to broader scientific initiatives or public health goals will be part of your duties. You will provide technical advice on microbiological issues to other departments, organizations, or public health agencies. To qualify for this role, you should have a Bachelor's degree in Microbiology, Biology, or a related field for entry-level positions. Advanced positions may require a Master's or Ph.D. in Microbiology or a specialized field. Technical skills such as a strong understanding of microbiological laboratory techniques, proficiency in using laboratory equipment, and familiarity with data analysis software are essential. This is a full-time, permanent position suitable for freshers, offering benefits such as health insurance, paid sick time, and Provident Fund. The work location is in person.,

About The Role : Job TitleTFL Lending, NCT LocationJaipur, India Role Description We are seeking a detail-oriented and analytical professional to join our team as an Analyst responsible for performing balance sheet spreading of corporate clients using the BARS (Balance Analysis and Risk Scoring) system . This role is critical in supporting credit risk assessment and financial analysis processes. Lending Operations team is responsible in managing Lifecycle events on Syndicated Loan Deals, which provides Middle Office and Back Office support to Corporate and Investment banking divisions of the bank. The team is also involved in various aspects of recording and maintaining all Middle and Operational Roles of Loan Life Cycle includes trade support, trade documentation, trade settlements, cash reconciliation, Drawdown, Re-pricing, Payment. Team works closely with stakeholders in the Finance, Credit and technology divisions for multiple business lines such as Distressed Product Group (DPG), Commercial Real Estate (CRE) Global Credit Trading (GCT), Credit Solutions Group (CSG), and Structured Trade & Export Finance (STEF) etc. The role is demanding, complex & critical in nature and requires interaction with Front Office, Business, CRM Finance, Sales, Agent Bank and Clients. What well offer you , 100% reimbursement under childcare assistance benefit (gender neutral) Sponsorship for Industry relevant certifications and education Accident and Term life Insurance Your key responsibilities Accurately spread financial statements (balance sheet, and income statement) of corporate clients into the BARS system. Analyze financial data to ensure consistency, accuracy, and completeness. Collaborate with credit officers and relationship managers to clarify financial inputs and resolve discrepancies. Maintain documentation and audit trails for all financial spreads. Ensure compliance with internal policies, regulatory requirements, and data quality standards. Support periodic reporting and data validation exercises. Maintains the highest level of confidentiality with all information obtained. Meets expectations for attendance and punctuality. Establish and maintain an efficient and productive working environment within the department based on continuous and effective staff communication. Your skills and experience Considering the demanding, complex & critical nature of the role and able to work in fast passed environment with consistent deadlines, candidates should meet the below requirements. Bachelors degree in Finance, Accounting, or a related field. German Language proficiency B1 and above Strong understanding of financial statements and accounting principles. Proficiency in Microsoft Excel; experience with BARS or similar financial spreading tools is a plus. 13 years of experience in financial analysis, credit risk, or a similar role. High attention to detail and accuracy. Strong communication and collaboration skills. Excellent verbal & written communication along with dynamic & confident approach. Flexible with Shift. Ability to implement tasks and projects with minimal supervision. Team player who fosters team spirit in a global setting. How well support you . . . . About us and our teams Please visit our company website for further information: https://www.db.com/company/company.htm We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively. Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group. We welcome applications from all people and promote a positive, fair and inclusive work environment.

Sterilization and preparation of media, Media growth promotion test, Media fill validations. Analysis of Pathogenesis test, MET, Environmental monitoring. Hands on experience in Analyzing of ELISA techniques like Binding ELISAs, Impurity based Assays HCP, LPA. Analysis of electrophoresis methods such as SDS-PAGE, IEF. Analysis of In-Process, DS, DP and Stability samples. Exractable volume of final DP sample. Aliquoting of batch release, stability samples. Withdrawing of stability samples as per the protocol. Receiving, storage and Physical verification of Reserve samples

Role & responsibilities 1. Responsible for Daily sampling and analysis of in-process and water samples as per procedure. 2. Responsible For Preparation and pouring of media plate. 3. To perform BET (Bacterial Endotoxin Test) test and Microassay. 4. To perform Sterility Test, Bioburden and MLT (Microbial Limit Test) or water and product. 5. To Perform Growth Promotion / Inhibitory / Indicative Property Test Of Media. 6. To report results of analysis in raw data sheet issued. 7. Entry and maintain all micro related logbooks. 8. To Follow the QMS (Quality Management System) system (Out of Specification, Deviation, Incident) 9. To participates in validation activity. 10. Observation and review of media fill container. 11. To perform environmental monitoring in clean room as per standard operating procedure. 12. To run the autoclave cycles and unload the loads as per SOP (Standard operation procedure). 13. To monitor incubator condition daily and record, to take print out and verify. 14. To maintain the GLP (Good laboratory practices) and follow GDP (Good documentation practices) in the laboratory. 15. To run washing and drying machine. 16. To raise Out of Specification if noticed. 17. Responsible to perform analysis of Analytical method Validation, Analytical method Transfer, reconstitute Solution stability, additional analytical test required as per party quarry reply. 18. Responsible for preparation Analytical method validation protocol, raw data, report. 19. Responsible for review of Analytical method validation protocol, raw data, report. 20. Responsible for preparation excel sheet preparation of analytical method validation, method transfer, Reconstitute Solution Stability study. 21. Responsible for planning of method validation activity. Requirement of sample, standard, reference standard, column, instrument provide to the analyst. 22. Responsible for training providing to the analyst for analytical method validation and method transfer SOPs (Standard operating procedures). 23. Responsible to control and maintain records like protocols, raw data, and report of method validation, method transfer and reconstitute solution stability. Analysis records, usage log books and status labels during day to day Analysis of validation. 24. Any other Responsibility assigned by HOD (Head of Department). 25. To assist HOD (Head of Department) for the preparation of regulatory inspection. Preferred candidate profile Candidate Should be From Pharma Background Good Verbal and Written Communication Willing to Relocate in Navsari , Gujarat Willing to Work in a Shift

Role Overview Function Overview Assist in the production of Screening Memos for the Originations Team As part of the loan origination process, the Origination Team produces a screening memo that details property level information (photos, maps, property description, rent roll and cash flows), market information (comparable property metrics and location) and financing information (capital stack, debt yield and loan information). The initial goal is for company to participate in the production of screening memos with the potential to participate in the underwriting and approval process for deals that Client elects to finance and refinance as well. Focus is to work on all the asset classes such multifamily, retail, storage, Industrial etc. loans originated by the Insurance. The Candidate would be supporting on the different workflows as mentioned below Agency Pre-screening and ICM Screening/underwriting of Agency Loans (Fannie Mae), deriving Underwriting Value, using financial spreading, rent roll analysis and creation of Investment Committee Memo. Non-Agency/Deal Pre-screening and ICM Screening/underwriting of Non-Agency Loans, deriving Underwriting Value, using financial spreading, rent roll analysis and creation of ICM. Loan Portfolio Stratification and ICM Stratification of portfolio of loans belonging to various asset classes, assessing their risk exposure using their property level, loan level and performance metrices. Draw Review Process Reviewing draw related Invoices, Proof of Payments, Construction Budget, TI/LC, etc. and updating the Draw Review Trackers accordingly. On Boarding the delas on AI Based platform with the help of various closing documents, Offering Memorandum, Loan Agreement etc. Extracting market and asset specific statistics from various data sources (for egCoStar or similar platforms) for the pipeline deals which are shortlisted for screening or underwriting Comparing the key deal metrics which includes Occupancy, Cap Rates, Debt Yield, Cash Flow, NOI etc. of the pipeline deals with existing portfolio Analyzing property pictures & map for location-based insights, preparing the capital stack (i.e., Equity vs. Debt) and presenting them in an excel and ppt format Collecting and preparing sales and rent comparable of the target originations with the market data sourced through broker reports or web-based applications. Studying the demographics to understand the unit mixes, interpreting all sources of incomes & expenses through review of cash flows, ascertaining vacancy rates & rental income using rent rolls and using NOI to calculate key liquidity ratios i.e., DSCR, DY etc. Creating investment memorandums with the deal team ahead of investment committee. Conducting due diligence prior to closing of deal as per closing checklist. Data input in pipeline tool (i.e., DealPath, Loan Tapes) as and when required. Essential Skills & Experience Must have a good knowledge of US Real Estate Industry and Market in underwriting the CML/CRE loans across all the sectors; along with hand on experience in underwriting the Multifamily agency (Freddie & Fannie) loans. Should be aware of the US taxes for different States and Counties; along with knowledge of various rent/sales comparable to be used in accordance with subject properties. Must be well versed with concepts of Cap Rate/Index rate/ LTC/LTV/Spreads/Cap Stack, Implied vs Cash Equity and various loan specific terminologies. In addition, should know the implications and effect of UW In-place and Mark to Market assumptions using property financials and its demographics through broker provided offering memorandum. Candidate should have the knowledge of US Market and Sub-Market to understand the deals demographics and its impact on the subject property. Hand on experience and proficient in preparing the dynamic financial models in MS excel. Masters degree Major in Finance or Banking and Capital Markets, CFA designation a plus. Exceptional quantitative aptitude and skill set with a mastery of Microsoft Office applications. Ability to manage multiple priorities in a fast paced, fluid environment. Previous background with real estate lending required with Debt Underwriting in real estate preferable. Rigorous analytical mindset with a high level of intellectual curiosity and excellent problem-solving skills. Acute focus on attention to detail, accuracy, and data validation. Effective communication skills (listening, verbal, and written). Excellent interpersonal and teamwork skills. Sound judgment and discretion. Strong initiative, energy and confidence completing assignments with limited supervision.

Walk In Drive For Microbiology Department In Formulation Division @ Corporate Office Department:- Microbiology Qualification :- B Sc | M Sc (Microbiology | Bio-Technology | Biochemistry) Division :- Formulation Fresher's :- 2023 | 2024 | 2025 Passed outs only. Interview Date:- 28-06-2025 Work Location :- MSNF Unit-II, Kothur & MSNF Unit-V, RK Puram Interview Location :- MSN Corporate, H. No. 2-91/10 & 11 /MSN, Whitefields, Kondapur, 500084 Contact No:- 040-30438701 | 8785 Note:- Candidate should bring Update Resume , Offer Letter, Increment Letter, CTC, Pay slips ,Bank Statement, Certificates, Aadhaar Card & Pan Card We are looking for candidates those who have experience in Production OSD Department.(Coating Operator & Compression Operator) About Company:- MSN Group is the fastest growing research-based pharmaceutical company based out of India. Founded in 2003 with a mission to make health care affordable, this Hyderabad-based venture has Fifteen API and Six finished dosage facilities established across India & USA. The group has an integrated R&D center for both API and formulation under one roof, dedicated to research and development of pharmaceuticals to make them more accessible. With core focus on speed and consistency in delivery, MSN has achieved the following: More than 900+ national and international patents Product portfolio featuring over 450 + APIs 300+ Formulations, covering over 35 major therapies Won the trust of more than 40 Million patients across 80+ countries globally Innovation and speed form the crux of our business strategy. Backed by a dedicated and experienced team of over 14,000 the organizational environment at MSN integrates multiple disciplines and functions by effective implementation of goals and objectives through technology, coupled with Integrity, Imagination and Innovation.

ENVIRONMENTAL HEALTH AND SAFETY RESEARCH & DEVELOPMENT CENTRE is looking for Microbiologist to join our dynamic team and embark on a rewarding career journey Microbial Research: Conduct research to investigate the growth, genetics, physiology, and behavior of microorganisms. Culturing Microorganisms: Grow and maintain cultures of microorganisms for various research and diagnostic purposes. Identification: Identify and classify microorganisms, often using techniques like DNA sequencing, microscopy, and biochemical assays. Disease Detection: Study and diagnose infectious diseases caused by microorganisms, which may involve clinical and diagnostic microbiology. Environmental Analysis: Evaluate the role of microorganisms in environmental processes, such as bioremediation, soil health, and water quality. Food and Beverage: Assess and ensure the safety and quality of food and beverages by monitoring for microbial contamination and spoilage. Pharmaceuticals: Work on the development and production of pharmaceuticals, including antibiotics, vaccines, and biologics. Biotechnology: Contribute to biotechnological processes, such as genetic engineering, fermentation, and the production of biofuels. Laboratory Testing: Perform a wide range of laboratory tests, including microbial culture, antimicrobial susceptibility testing, and molecular techniques. Quality Control: Monitor and maintain quality control in industries like healthcare, pharmaceuticals, and food production. Qualification : B Sc/M.Sc/M.Tech Experience require in NABL and BIS Audit ,FSSAI Documentation Validation,Preparation of SOP Familiar about protocol of Microbiology

Candidate must have experience from pharma industry.

Backup Administration, Macro/Micro Segmentation, IOT Security Expertise in VLAN segmentation, IT/OT isolation strategies, and backup management Strong project management skills for implementing security measures across multiple sites Excellent communication skills for stakeholder engagement and leadership reporting Analytical mindset for identifying risks and designing effective mitigation strategies

PrimeGen Healthcare Laboratories Private Limited is looking for Jr. Molecular Biologist to join our dynamic team and embark on a rewarding career journey. Microbial Research : Conduct research on various microorganisms to understand their structure, behavior, growth patterns, and functions. Microbial Identification : Use techniques like microscopy, DNA sequencing, and biochemical assays to identify and classify microorganisms. Culturing Microorganisms : Cultivate and maintain microorganisms in the laboratory, ensuring that they have the appropriate growth conditions. Disease Diagnosis : In clinical microbiology, microbiologists diagnose infectious diseases by identifying the pathogens responsible and conducting drug susceptibility testing. Environmental Monitoring : Analyze water, soil, and air samples to assess microbial contamination, environmental impact, and safety. Food Microbiology : Ensure the safety of food products by testing for the presence of harmful microorganisms and monitoring food production processes. Pharmaceuticals and Biotechnology : Work on the development and production of antibiotics, vaccines, and biotechnology products. Genetic Engineering : Engage in genetic engineering and genetic modification of microorganisms to develop new strains with specific characteristics. Quality Control : Maintain quality control in various industries by conducting tests to verify product quality and safety. Research and Development : Work on innovative research projects to advance scientific knowledge and discover new applications for microorganisms. Public Health : Monitor and control infectious disease outbreaks, track microbial contamination in the environment, and contribute to public health policy. Laboratory Safety : Ensure that laboratory safety protocols are followed to prevent the accidental release or exposure to dangerous microorganisms. Reporting and Documentation : Maintain detailed records of experiments, findings, and laboratory procedures. Prepare research reports and scientific publications.

Urgent Hiring: Microbiologists (47 Years Experience) Are you a skilled Microbiologist with a passion for quality and precision? Join our growing team in Moga and contribute to excellence in the spice industry! Position: Microbiologist Qualification: B.Sc in Microbiology Experience: 4 to 7 Years Industry: Spices & Food Manufacturing Location: Moga, Punjab Salary: 22,000 28,000 (based on experience) We're looking for professionals who are detail-oriented, passionate about microbiological testing, and eager to grow in a fast-paced industry. Interested or know someone who fits? Send your resume at mansi.sharma@manpower.co.in

Walk In Drive For Microbiology Department In Formulation Division @ Corporate Office Department:- Microbiology Qualification :- B Sc | M Sc (Microbiology | Bio-Technology | Biochemistry) Division :- Formulation Fresher's :- 2023 & 2024 Passed outs only. Interview Date:- 10-05-2025 Division :- Formulation's Work Location :- MSNF Unit-II, Kothur & MSNF Unit-V, RK Puram Interview Location :- MSN Corporate, H. No. 2-91/10 & 11 /MSN, Whitefields, Kondapur, 500084 Contact No:- 040-30438701 | 8785 Note:- Candidate should bring Update Resume , Offer Letter, Increment Letter, CTC, Pay slips ,Bank Statement, Certificates, Aadhaar Card & Pan Card We are looking for candidates those who have experience in Production OSD Department.(Coating Operator & Compression Operator) About Company:- MSN Group is the fastest growing research-based pharmaceutical company based out of India. Founded in 2003 with a mission to make health care affordable, this Hyderabad-based venture has Fifteen API and Six finished dosage facilities established across India & USA. The group has an integrated R&D center for both API and formulation under one roof, dedicated to research and development of pharmaceuticals to make them more accessible. With core focus on speed and consistency in delivery, MSN has achieved the following: More than 900+ national and international patents Product portfolio featuring over 450 + APIs 300+ Formulations, covering over 35 major therapies Won the trust of more than 40 Million patients across 80+ countries globally Innovation and speed form the crux of our business strategy. Backed by a dedicated and experienced team of over 14,000 the organizational environment at MSN integrates multiple disciplines and functions by effective implementation of goals and objectives through technology, coupled with Integrity, Imagination and Innovation.

Job Summary: Perform biochemical tests, operate laboratory instruments, and ensure accuracy and quality of test results. Key Responsibilities: Conduct biochemical investigations as per protocols. Operate, calibrate, and maintain lab equipment. Maintain quality control and safety standards. Record and analyze test results.

Job Requirements Department: Engineering Overview: We are currently seeking a highly skilled and motivated Officer - Plating to join our team at our facility in Hosur, Tamil Nadu. This is a full-time position in the Engineering department, and the ideal candidate will have experience in plating processes and a strong attention to detail. Key Responsibilities: - Oversee the plating process for all watches and wearables produced at the facility - Ensure that all plating processes are carried out according to company standards and quality requirements - Monitor and maintain the plating equipment and machinery to ensure optimal performance - Troubleshoot any issues that may arise during the plating process - Collaborate with other departments to ensure timely and efficient production - Train and supervise junior plating technicians - Maintain accurate records of plating processes and materials used - Implement and maintain safety protocols for the plating department Qualifications: - Bachelor's degree in Engineering or a related field - Minimum of 3 years of experience in plating processes, preferably in the watch or jewelry industry - Strong understanding of plating techniques and equipment - Excellent attention to detail and ability to maintain high quality standards - Ability to work independently and in a team environment - Strong communication and interpersonal skills - Knowledge of safety protocols and procedures in a manufacturing setting - Willingness to work flexible hours as needed Additional Parameters: - Experience with electroplating and PVD processes is preferred - Knowledge of ISO and other quality management systems is a plus - Familiarity with Lean or Six Sigma methodologies is an asset - Fluency in Tamil is preferred, but not required If you are a highly motivated individual with a passion for quality and a strong background in plating processes, we encourage you to apply for this exciting opportunity at Titan. We offer a competitive salary, benefits package, and opportunities for growth and development within the company. Join our team and be a part of creating world-class watches and wearables at Titan.

Department - Machine Made Chains - Gold Jewellery Manufacturing Position- Officer Machine Made Chains Level L2 Level Role Responsible for maintaining the daily output with lowest inventory as per the established lead-time. Responsible for ensuring the right alloy and purity for the different raw materials in different karatages and colour. Responsible for ensuring the 100% raw material availability for the weaving machines based on the orders. Responsible for implementing TPM in all the critical machines at raw material preparation area. Responsible for maintaining the documents related to IMS, OHSMS management systems as per requirement. Responsible for training the New NEEM trainees in all the raw material preparation process as on when required. Responsible for the CAPA implementation for the quality rejections. Responsible for 100% gold accounting in raw material preparation area. Responsible for handling shift operations at Raw material preparation area Load/Volume Annual Requirement in FY26: Raw material supply for 5 tonne roll chain production Activities Involved Precise calculation of various alloys and Purities. Setting of Crucible & dies in CCM. Rough rolling of rod and plate Ensuring Proper annealing in line with safety standards Precise wire-drawing Process to maintain the accuracy level in microns without burr and Peel off. Ensuring the wire Flattening process with the required accuracy level. Setting of parameters for different wire sizes of Annealing & Wire Loading. Strip Loading and Programming in fine strip rolling process. Loading of strip and ensuring process parameters ( Machine Speed, Winder Torque) Setting of Pitch for different width of Flat wire and pitch adjustment with respect to the Bobbin width. Ensuring the raw material output with the specified bobbin and within the required lead-time Ensuring all the required documents updated as on date for the TPM, 5S, DWM IMS , OHSMS. Implementing the suggestions and kaizens for continuous improvement.