39 Cswip Jobs - Page 2

Role & responsibilities 1. LSAW Production and Tooling Experience. 2. Knowledge of ASME Section IX 3. Knowledge of Welding 4. Review and preparation of various documents like Weld Map WPS-PQR 5. LSAW Production - Forming, Welding and Finishing section exp is must. 6. Welding Knowledge like SAW, GMAW, SMAW 7. Mechanical Expander Machine, Expander Tooling, Sizing Press machine, End Chapring Machine and Hydro Tester Machine. 8. Knowledge of International codes ASME & API, ISO 9. SAP Basic Knowledge. 10. Preparation all ISO / IMS and EHS documents and revising as and when required.

Dalmia Cement Bharat Ltd is looking for Mechanical Inspector to join our dynamic team and embark on a rewarding career journey Quality Inspection: Conduct inspections and audits of products, materials, components, or systems to verify conformance with established quality standards, specifications, and requirements Regulatory Compliance: Ensure compliance with applicable laws, regulations, codes, and industry standards governing product safety, environmental protection, occupational health, and consumer protection Documentation Review: Review documentation, records, and technical specifications related to inspected items or processes to confirm accuracy, completeness, and adherence to documentation requirements Physical Examination: Perform visual inspections, measurements, tests, and examinations of physical attributes, dimensions, and properties of inspected items using specialized tools, equipment, and instruments Sampling and Testing: Collect samples, specimens, or test specimens from production batches, lots, or shipments for laboratory analysis, testing, or further evaluation as per sampling plans and testing protocols Defect Identification: Identify and document defects, non-conformities, deviations, or discrepancies observed during inspections Classify defects based on severity, impact, and risk factors to determine appropriate corrective actions Root Cause Analysis: Investigate root causes of quality issues, failures, or discrepancies detected during inspections Analyze data, trends, and patterns to identify underlying problems and recommend preventive measures Corrective Action: Recommend corrective actions, preventive measures, and quality improvement initiatives to address identified issues, prevent recurrence, and enhance overall quality performance

Role & responsibilities Department: Fabrication / Production / Quality Reports To: Production Manager / QA Manager / Plant Head Experience Required: 48 years Education: Diploma / B.Tech in Mechanical Engineering or relevant field Certifications Preferred: CSWIP 3.1 / AWS-CWI / ISO 14731 upervise and coordinate welding activities in production or project environment. Review and approve Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Qualification Tests (WQT). Ensure compliance with international standards like ASME, AWS, ISO 9606, and EN ISO 3834. Monitor welder performance and manage qualification records.

Dalmia Bharat Group is looking for Mechanical Inspector to join our dynamic team and embark on a rewarding career journey Examines mechanical components for quality and specifications Performs inspections during manufacturing and installation Documents issues and supports corrective actions Ensures compliance with industry standards

Responsible for oversee and manage welding projects from initiation to completion, ensuring adherence to quality and safety standards. Collaborate with fabrication, and quality control team, to optimize welding processes and resolve technical issues.

We're looking for an experienced Quality control Faculty to deliver specialized training in Oil & Gas Quality Assurance, NDT, Industrial Piping, and Welding technologies. Apply if you have a strong industry background and a passion for teaching . Required Candidate profile * Bachelors or Diploma in Mechanical Engineering * Minimum 2 years experienced in Quality control/Assurance *Experience in Oil & Gas(Upstream/Midstream/Downstream) is a plus Perks and benefits * Other Benefits and allowances are provided

Role & responsibilities Job Role and Responsibilities Coordinate with the Design team to ensure welding feasibility, proper symbol representation, welding adequacy, and support for FM/FMEA activities. Review and authorize Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and determine appropriate welding methods based on materials and environmental conditions. Supervise and authorize trials and experiments to develop innovative welding methods and equipment. Inspect weld quality, analyze defects, and provide recommendations for improvement. Offer technical support and training to welders and supervisors to enhance skills and performance. Manage welding projects, ensuring timely completion within budgetary constraints. Stay informed about industry advancements and integrate modern welding technologies. Verify and authorize welder qualifications as per relevant code requirements. Ensure compliance with customer requirements and applicable national or international standards in welding and related activities. Address non-conforming outputs and take necessary actions in consultation with the HOD, Quality In-charge, Design, or Cross-Functional Team (CFT). Support vendor development initiatives to achieve high-quality welding outputs. Preferred candidate profile Required skill: Minimum 15 years welding experience GMAW,SMAW,SAW,FCAW,GTAW knowledge NDT and DT knowledge (RT,UT,PT,MPT) 7 QC tools CSWIP Perks and benefits

Job Summary: We are seeking a highly skilled and experienced Senior Engineer for welding department to join our team. The ideal candidate will have a strong background in welding processes, materials, and standards, with expertise in preparing welding qualification documents, WPS, PQR, and WPQ as per ASME and ISO standards. The candidate should possess excellent problem-solving skills, a deep understanding of mechanical and chemical testing of materials, and hands-on experience with welding machines and parameters. Key Responsibilities: Prepare and review Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Performance Qualifications (WPQ) as per ASME and ISO standards. Ensure compliance with relevant codes and standards for welding activities. Interpret engineering drawings and standards to finalize filler wires, welding parameters, and other welding-related specifications. Optimize welding processes to improve quality, efficiency, and cost-effectiveness. Conduct and oversee mechanical and chemical testing of materials to ensure compliance with project requirements. Analyze test data and provide recommendations for material selection and welding processes. Hands-on experience with welding machines and understanding of welding parameters. Troubleshoot welding equipment and process-related issues. Ensure welding activities meet quality standards and project specifications. Conduct audits and inspections to verify compliance with welding procedures. Collaborate with cross-functional teams, including design, production, and quality assurance, to ensure seamless project execution. Mentor and guide junior engineers and welding technicians. Identify and resolve welding-related issues during fabrication and production. Provide technical support for root cause analysis and corrective actions. Education: Bachelors degree in Mechanical Engineering or Metallurgical Engineering. CSWIP or AWS certification is a strong advantage Experience: Minimum 5 years of relevant experience in welding engineering. Proven experience in preparing WPS, PQR, and WPQ as per ASME and ISO standards. Hands-on experience with welding machines and parameters. Fabrication experience of Stainless steel, alloy steel, and aluminium alloys/ Technical Skills: Understanding of mechanical and chemical testing and properties of materials. Proficiency in interpreting engineering drawings and standards. Strong data analysis and reporting skills.

Role & responsibilities Carrying out inspection as per inspection and test plan for Pipe Spool Fabrication. Material verification and fit-up checking Coating and Blasting Inspections Reviewing Procedures for Quality Assurance Welding procedure assignment for Welding visual inspection Radiography/AUT Marking including lot formation Radiography Film Reviewing and/or witnessing AUT Final Clearance and certification (Online through application) Preferred candidate profile Candidate should be a Diploma holder or Graduate in Engineering field with minimum 3 years of experience in Quality Inspection. Should have knowledge on ASME B 31.3, Chapter V and VI for PWHT and hardness checking and Radiography/UT/PT/MPT inspection. Knowledge on Common Materials including Different grades of carbon steels covering LTCS, NACE, different grades of SS covering 304, 304L, 316, 321 and 347, Different grades of LAS steels covering P11, P22, P5, P9 and P91. NACE Level II and Level III for Coatings Welding Inspection and acceptance as per ASME Sec IX. NDT Level II Should have ASNT/ISNT level II certifications Interested candidates, please send CV to arunkumar.choudhury@sgs.com

Conversant with various codes: ASME Boiler & PV and B31 Piping Codes, AWS, API. Understanding of welding planning inputs (Weld & Test Plan, WPS, PQR, WPQT, consumables estimation, PWHT procedures) Welding Process & equipment familiar with GTAW,SMAW,SAW,GMAW, FCAW Working experience in Oil & Gas Refineries/ Fertilizers/ Petrochemicals plants in domestic/ middle east countries is preferred On site execution experience mainly in cladding techniques & piping fabrication Understanding of welding quality controls & measures in process plant equipment & piping fabrication additional CSWIP/ IWE certifications is preferred

Job Title: Welding and NDT Engineer Location: Kothrud, Pune & Vadodara, Gujarat Employment Type: Full-Time Experience: 2-5 Years (Freshers with relevant certifications may also apply) Job summary We are looking for a skilled Welding and NDT Engineer to join our growing team at Tecknowcon Services. The ideal candidate will be responsible for overseeing welding activities, conducting non-destructive testing (NDT), ensuring compliance with industry standards, and maintaining the highest levels of quality assurance and control across projects. Key Responsibilities Develop, review, and approve Welding Procedure Specifications (WPS), WPQR, and welder qualifications as per international standards (ASME, ISO, EN, etc.) Perform and supervise NDT methods including UT, RT, MT, PT, and VT Interpret NDT results and prepare detailed inspection and testing reports Ensure compliance with applicable codes and standards (ISO 3834, EN 1090, EN 15085, ASME) Conduct audits and quality checks at vendor and site locations Support training and qualification of welders and NDT personnel Qualifications & Skills: Degree/Diploma in Mechanical/Metallurgical Engineering Knowledge of welding standards and procedures (IWE/IWT preferred) Hands-on experience with welding inspections and NDT techniques Good understanding of QA/QC protocols Strong analytical and report-writing skills Willingness to travel for field/site inspections Benefits Exposure to domestic and international projects Opportunities for certification and skill development Dynamic and supportive work environment Competitive salary and travel allowances

Minimum 5 years of experience in Steel Structure Should have experience in structural fabrication NDT Level II in UT, RT, MT, PT QA/QC experience Knowledge of AWS D1.1 / IS Code

Greetings!!! We are hiring for the position of Inspection Engineers - Tarapur & Boisar (Mumbai)l ocation Education: B.E - Mechanical OR Diploma in Mechanical Experience: Minimum 3 years for BE. Mechanical AND 5 years for DME CSWIP 3.1 Certification is mandatory. NDT Level 2 in RT, UT, MT and PT are mandatory

Job Description The Project Execution / Operations Engineer is responsible for delivering the order to the customer on time, on budget, and with the utmost quality. The Project Execution / Operations Engineer must work with the customer to define their requirements and satisfy them by meticulously planning, tracking, and verifying the execution of the numerous tasks required. The Project Execution / Operations Engineer assumes complete responsibility for project orders from the Internal Handover of the order through shipment and final documentation. •Assures the timely release of engineering documentation to fabricators to meet schedules- both initial submittals and the finalization of all outstanding documentation. also monitor and track the inventory at the fabricators place and provide the status to management periodically. Lead the Cross-functional team meetings for the Kick-off and Progress review of Project orders with Internal and External Stakeholders On-time Inspection notification to the customer upon discussion with JC quality & Fabricator planning. Awareness of fabrication/production activity (In-process, welding, Inspection, etc.) at the shop floor. The Project Execution / Operations Engineer is responsible for delivering the order to the customer on time, on budget, and with the utmost quality. The Project Execution / Operations Engineer must work with the customer to define their requirements and satisfy them by meticulously planning, tracking, and verifying the execution of the numerous tasks required. The Project Execution / Operations Engineer assumes complete responsibility for project orders from the Internal Handover of the order through shipment and final documentation. •Assures the timely release of engineering documentation to fabricators to meet schedules- both initial submittals and the finalization of all outstanding documentation. also monitor and track the inventory at the fabricators place and provide the status to management periodically. Lead the Cross-functional team meetings for the Kick-off and Progress review of Project orders with Internal and External Stakeholders On-time Inspection notification to the customer upon discussion with JC quality & Fabricator planning. Awareness of fabrication/production activity (In-process, welding, Inspection, etc.) at the shop floor. Demonstrate ownership and accountability for total project execution performance & safety (project initiation to project completion) on all assigned projects. Review assigned orders to ensure that requirements are adequately defined and documented and identify any differences between the order. Generate the Project Execution plan (Procurement + Manufacturing) & accountable for the achievement of the project contractual specification and schedules. also, maintain the up-to-date status of assigned orders, communicate progress to customers via weekly/monthly reports, and facilitate the elimination of any barriers to on-time shipment. Shall be able to provide Heads-up to Sales Support and Fabricators based on the In-hand and upcoming Project orders. Work with Quality, sales & sales support, engineering, purchasing, finance, logistics & fabricators QA/AC production teams for complete, thorough and accurate information such as bills of material, pipe routing, schedules, material specifications, engineering documentation, buy-out item specifications, engineering changes, and supply of all documentation required to fulfill orders and QMS procedures. Ensure SAP BOM vs physical consumption BOM verification prior to GRN activity. Qualifications Experience 8-10 years Technical Skills Wet seal & dry seal systems application knowledge, ASME, API 682 & API 610 Manufacturing processes Communication, Team building