8 Cpd Jobs

Role Accountabilities The individual should have extensive experience in advanced Power System modelling & analysis Must demonstrate experience in decision-making and solution development across all scales from small industrial systems to complex national power grids Preparing and reviewing engineering deliverables including complex reports, proposals, presentations with the GBA Power Delivery Team. Conducting power system transient studies, including insulation coordination, switching transients, and motor starting Conducting power flow, short circuit, reactive power, and power quality studies, including grid compliance studies. Conducting protection coordination, relay settings, arc flash and power quality studies. Conducting power system dynamic studies including grid connection studies for renewable integration. Taking personal responsibility for the preparation of engineering documentation and leading the engineering effort for project including providing technical and performance oversight for members of the power team. To manage selected projects, project task/responsibilities as assigned, and/or design processes (or parts of projects) to meet agreed budget, quality and timeframe targets. Provide technical leadership, direction and support to the design team and deliver fully documented designs to meet Client objectives and Arcadis quality system requirements. Identify the gap and develop the technical competency of team and ensure the application of relevant international standards and engineering knowledge in various projects. Plan, organize, estimate, schedule and effectively monitor all work activities. Participate in regular meetings and correspond with Clients. Conduct internal reviews and quality checks of deliverables to ensure compliance with the projects requirements. Leading interdisciplinary coordination as required for the project. Understanding scope and change in scope when it arises. Perform other duties and responsibilities as required relevant to the role from time to time. Qualifications & Experience At least 20 years of experience in Power System modelling/ analysis & conducting various Power System Studies, preferably in a consulting environment. Chartership with EC UK or equivalent Consulting experience in the US / UK & Europe / Australia regions. Exposure in International standards such as IEC, IEEE, NFPA etc. PhD or Post graduate degree in Electrical Engineering Technology, Electrical Power Systems Engineering from a recognized University. Experience in ETAP, DIgSILENT, CDEGS, SKM, PSCAD, EMTP-RV, PSSE etc or other similar software tools. Experience in creating and implementing employee learning and development initiatives Excellent English written and verbal communication skills. Excellent mathematical skills applied in engineering calculations. Organizational skills and proactive approach in project management. Actively continue to develop technical knowledge and new emerging technology through regular CPD training.

Role Accountabilities Preparing and reviewing engineering deliverables including complex reports, proposals, presentations, and drawing packages with the USA ET Team. HV transmission and distribution substations primary electrical design, layout design, specification of plant, coordination of civil design, earthing system analysis and design. Taking personal responsibility for the preparation of detailed engineering documentation and leading the engineering effort for project providing technical and performance oversight for team members. To manage selected projects, project task/responsibilities as assigned, and/or design processes (or parts of projects) to meet agreed budget, quality, and timeframe targets. To deliver fully documented designs to meet Client objectives and Arcadis quality system requirements. To develop technical competency of direct reports / junior team members and ensure application of relevant international / USA standards and engineering knowledge in various projects. Create opportunities to implement new digital approaches on your projects. Apply engineering knowledge, techniques and tools complying with international design standards and USA Codes and Standards relevant to the assigned project. Prepare document and drawing package for the appropriate project design submission stage complying with codes and standards and delivering the design with high quality. Conduct internal review and quality checks of engineering drawings and design calculations to ensure compliance with the projects requirements. Prepare and register all relevant documentation and design reports and ensure all documentation is accurate and in compliance with the Arcadis and customer requirements. Leading interdisciplinary coordination as required for the project. Leading technical issue resolution processes. Understanding scope and change in scope when it arises. Qualifications Experience At least 12 years experience in substation primary design, preferably in a consulting environment. At least 2 years experience in design drafting electrical infrastructure in USA, general familiarity with the electricity supply industry, electricity transmission and distribution practices. Consulting experience in power projects in USA is preferred. Experience in the production of CAD documentation to USA Standards and other international design standards. Experience in processes from concept stage to construction and as-built drawings will also be beneficial. Graduate in Bachelor of Technology/ Science in Electrical Engineering from recognized University. Excellent English written and verbal communication skills. Excellent mathematical skills applied in engineering calculations. Organizational skills and proactive approach in project management. Ability to lead, and provide technical solutions to problems with good influencing, motivating and delegating skills. Actively continue to develop technical knowledge and new emerging technology through regular CPD training. Ability to work together as a team for the Group, not just the individual. Have knowledge of drafting and BIM, how to define BIM outcomes, BIM processes, how to coordinate a BIM project within the 3D environment and how to apply design to the models they produce. Computational design, design algorithms and automation of data manipulation

Design - Aero structure (Lead Positions) Graduate / Post Graduation in Mechanical/Aerospace/Civil Engineering Max - 8 To 13+ Years Functional Area _ Engineering Services JD Location: Bengaluru Technical Skills Experience in Airbus methodologies and Processes for SA & LR, A350 Strong experience in 3d Modelling, DMU creation/modification and Integration Excellent drawing reading and understanding skills Experience in Detailing, Assembly and BOM Minimum 6 years of working experience on Aircraft structures( Primary and secondary). Exposure in Plant Engineering, Concessions, DQN and Repairs • Good Working Knowledge in Metallic and Composite Structures Tools Skills: • Catia V5: Good Hands on experience in different Catia Modules such as Part Design, Surface, Sheet Metal and CPD • PASS/VPM: Working Knowledge on PASS and VPM. • TAKSY/GILDA, CCD • Exposure to work with Scripts (VBA) /Macros will be an added advantage. • Possessing an Airbus certification is an added advantage. Behavioral / Role Based Skills: • Organised and Pro-active • Elaborative and precise communication skills • Ability to deepdive without loosing the bird eye view. • Ability to deconstruct complex problem into solvable issues. Thanks & Regards Surya 8884422681 surya.manikanta-varma.ext@capgemini.com

Bachelor’s in Mechanical/Aerospace or related field, 5+ years CATIA V5 experience, knowledge of CPD a plus, strong MS Office skills, and good understanding of aerospace design and manufacturing Required Candidate profile Only apply if you can join immediately. Others, please ignore this post.

Looking for challenging role If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you Siemens Energy India Limited, is seeking a responsible, professional, and self-motivated individual to join the Gas Turbine R&D, Gurgaon as “Gas Turbine – Combustion Mechanical design engineer”. This position provides an exciting opportunity to work in a fast-paced, dynamic, global product development & service environment. Your new role – challenging and future- oriented Responsible for designing of Gas Turbine Combustion and casing components (e.g., combustion liner, nozzles, transition duct, fuel piping system, exit diffusers, casing etc.) to meet full spectrum of design requirements (functionality, robustness, cost effectiveness, manufacturing requirements and technology, assembly requirements and service requirements) Applies appropriate methods which focus on robust design, like tolerance stack up, GD&T, analysis, standards, and design rules. Create and finalize the design concept working closely with FEA analyst, HT engineer, Aero-designer to do the design changes from conceptual design to final product design. Technical checking of Engineering drawings/PMI and BOM of Gas Turbine components. Development of innovative design solutions. Controls risk of design changes with appropriate methods like FMEA, QFD. Creates, evaluates, reviews technical documents, e.g. purchasing specification, working specification, check lists, standard part calculations. Execute/support technical reviews, risk assessments, serviceability, and fault report considerations. Explore cost reduction opportunities. We don’t need superheroes, just super minds Bachelor, master’s or PHD in mechanical engineering/design from recognized college/university At least 8 years of work experience with mechanical design exposure in an engineering organization. Experience in Gas Turbine combustion component will be preferred. Basic Knowledge of mechanical design, strength of material, thermodynamics, heat transfer. Desirable to have of knowledge of Gas turbine combustion principles, thermo-acoustics, aero-design principles, emissions etc. Basic mechanical integrity knowledge with ability to perform simple hand calculations. Working experience to apply GD&T and tolerance stack up. Sound knowledge of manufacturing/assembly/fabrication processes Exposure to CAD software (UG-NX preferred), SAP, PLM, CPD Teamcenter, MS Office. Good communication skill in English language (Verbal & Written). Strong inter-personal skills i.e., team player, quick learner, imaginative, innovative etc. We’ve got quite a lot to offer. How about you This role is based at Site (Gurgaon). You’ll also get to visit other locations in India and beyond, so you’ll need to go where this journey takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world"™s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? Job titleGas Turbine - Combustion Mechanical Design Engineer Energy, Siemens Limited India is seeking a responsible, professional, and self-motivated individual to join the Gas Turbine R&D, Gurgaon as "Gas Turbine Combustion Mechanical design engineer". This position provides an exciting opportunity to work in a fast-paced, dynamic, global product development & service environment. A key challenge in combustor development is managing high temperatures and cyclic loads from engine starts and stops, along with temperature fluctuations during combustion. Your designs must meet life requirements while optimizing aerodynamics for traditional fuels like natural gas and diesel, as well as hydrogen and other decarbonized options, ensuring stability and low emissions. Your new role challenging and future- oriented Responsible for designing of Gas Turbine Combustion and casing components (e.g., combustion liner, nozzles, transition duct, fuel piping system, exit diffusers, casing etc.) to meet full spectrum of design requirements (functionality, robustness, cost effectiveness, manufacturing requirements and technology, assembly requirements and service requirements) Supporting Service, Procurement and Manufacturing Support to order engineering on technical question Applies appropriate methods which focus on robust design, like tolerance stack up, GD&T, analysis, standards, and design rules. Create and finalize the design concept working closely with FEA analyst, HT engineer, Aero-designer to do the design changes from conceptual design to final product design. Technical checking of Engineering drawings/PMI and BOM of Gas Turbine components. Development of innovative design solutions. Controls risk of design changes with appropriate methods like FMEA, QFD. Creates, evaluates, reviews technical documents, e.g. purchasing specification, working specification, check lists, standard part calculations. Execute/support technical reviews, risk assessments, serviceability, and fault report considerations. Explore cost reduction opportunities. We don"™t need superheroes, just super minds Bachelor, Master"™s or PHD in Mechanical engineering/design from recognized college/university Sound knowledge of manufacturing/assembly/fabrication processes At least 5 years of work experience with mechanical design exposure in an engineering organization. Experience in Gas Turbine combustion component will be preferred. Basic Knowledge of mechanical design, strength of material, thermodynamics, heat transfer. Desirable to have of knowledge of Gas turbine combustion principles, thermo-acoustics, aero-design principles, emissions etc. Basic mechanical integrity knowledge with ability to perform simple hand calculations. Working experience to apply GD&T and tolerance stack up. Exposure to CAD software (UG-NX preferred), SAP, PLM, CPD Teamcenter, MS Office. Good communication skill in English language (Verbal & Written). Strong inter-personal skills i.e., team player, quick learner, curious, imaginative, innovative etc. We"™ve got quite a lot to offer. How about you? This role is based at Site (Gurgaon). You"™ll also get to visit other locations in India and beyond, so you"™ll need to go where this journey takes you. In return, you"™ll get the chance to work with teams impacting entire cities, countries and the shape of things to come. We"™re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

In-depth understanding of ICD-10, CPT, HCPCS codes, and how they apply to claim rejections. SME status in medical billing processes particularly in rejection experience in medical billing with a focus on claim rejection medical billing rejections

Urgent Hiring for Pega Decisioning Engineer (C2H ) Contract to Hire for Pune and Hyderabad Location Notice Period require Immediate to 15 Days only Minimum 3 years of implementation experience in Pega CDH 8.x and Pega Infinity. Pega Certified Decisioning Consultant (CPDC) on the latest version is a must. Pega Senior System Architect (CSSA) certification is a must. Understand Pega Platform and its role in integrating with systems along with the capabilities of Business Process Automation. In-depth knowledge of Pega CDH and its significance in the banking industry. Thorough understanding of Next Best Action Designer and ability to define strategies for efficient model performances. Ability to create, run, and analyse Adaptive models for efficient campaign management and delivery. Design strategies that will be in integrated in the Pega campaign journey. Proficient in using all areas of Dev Studio, App Studio and CDH portal. Implemented Multi Level Decisioning and Multi App in at least one of the projects. Working experience with 1:1 Operations Manager, Application Overlays and able to troubleshoot. Participate in Data Migration and deployment Pipelines for Business Operations Environment Strategy Designing and Building Campaigns with multiple channels like Email, SMS, Push, Web, Mobile etc. Able to modify Request and Response APIs such and GetOffers and ResponseCapture. Able to work on API Container and OOTB dataflow for inbound and outbound. Able to troubleshoot technical errors in versions 8.x+ e.g., Trace, Clipboard, backend analysis etc. Able to suggest strategic customisations where OOTB solutions does not work for HSBC. Proficient in Agile ways of working and implementation. Interested Candidate can share your updated profile on Alka.r@intuition-it.com.