452 Corrosion Jobs - Page 5

Purpose of Position Quality Inspector services for Cylinder inspections involves visually assessing, testing witness, and maintaining cylinders to ensure their safe and reliable use. This includes checking for external damage, internal corrosion, and ensuring compliance with safety standards and regulations. (10 Hrs shift) with NDT Level - II certification having around 10 years of experience in pressure vessels and pressure parts, flexible to work in night shift also (if required). The job incumbent is responsible for inspection in QA/QC field of IND business (Oil & Gas, Power, Chemical and Petrochemical Industries). The position performs in line with the Bureau Veritas Quality Assurance System, including the BV Code of Ethics and the BV Group policy Major Responsibilities Inspection of Pressure Vessels & components: (Cylinders, Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts Criteria for Performance Evaluation (KPIs) Time taken to deliver the report to the client Quality of report Inspection done in the allocated timeframe Client claims Detention ratio Customer satisfaction Share information, Best practice, Knowledge Management Quality of Work Number of surveys / inspections Compliance of internal and external guidelines, policies, procedures. Adherence to environmental and safety policies of our organization

Experience: 08-20 Years Qualification: B.E / B. Tech Roles & Responsibilities Shall be responsible for the execution of activities related to the Static Equipment Engineering in the project. Define discipline list of activities and deliverables, setup time schedules and coordinate activities in accordance with Project schedule Coordinate discipline workflow, interfaces, quality checks and approval of discipline deliverables including vendor documents. Provide technical support to Project functions including Procurement and Construction Define and issue Purchase Requisitions, prepare Technical Bid Evaluations and coordinate Vendor follow-up activities Support the construction team in implementing engineering solutions at site Possess sound knowledge in the designing of Static Equipment’s like Reactors, Pressure Vessels, columns, heat exchangers, air coolers, storage tanks as per ASME Section VIII Div-1/ Div-2, API 650/620, TEMA. Good knowledge of Materials of construction like Carbon steels and Corrosion Resistant Alloys (CRA). Should be familiar with using Design Software’s like PV Elite, COMPRESS, ETANK.

Job Title: Corrosion Lab Technician Location: State of Kuwait Job Type: Full-Time No. of Vacancies: 1 Job Description: We are currently seeking a skilled and experienced Corrosion Lab Technician to join our team in Kuwait. The ideal candidate will have a background in chemical or electrical engineering and hands-on experience with corrosion lab equipment, calibration, and metallographic sample preparation. Key Responsibilities: Operate and maintain corrosion lab equipment Perform calibration, charging, and sample registration procedures Conduct metallographic sample preparation and analysis Follow lab procedures including risk assessment and hazard identification Assist with preparation of reports and documentation Ensure compliance with safety and quality standards Support research and development activities as required Qualifications & Requirements: Minimum: Secondary School Education Preferred: Diploma in Chemical or Electrical Engineering NACE Certification or equivalent (preferred) Minimum 3 years of relevant experience in corrosion labs or metallographic sample preparation Proficient in the use of corrosion lab tools and instruments Strong understanding of lab safety practices and risk assessment Ability to understand and communicate in English Compensation & Benefits: Monthly Salary: KD 480/- Food: 3 meals per day provided by the company Accommodation: Shared bachelor accommodation provided Transportation: Company-provided transport between accommodation and worksite Annual Leave: 30 days per year (as per Kuwait Labor Law) Annual Leave Air Ticket: Provided by the company or equivalent ticket allowance Other Benefits: As per Kuwait Labor Law Apply Now: If you meet the above requirements and are ready to take the next step in your career, apply today to join a reputable company in a key technical role! Job Type: Full-time Schedule: Day shift Work Location: In person

Job Title: Fitter – Welding (Outdoor Furniture) Department: Production / Manufacturing Job Summary: We are seeking a skilled and detail-oriented Fitter with welding expertise to join our outdoor furniture manufacturing team. The ideal candidate will be responsible for assembling, fitting, and welding metal components to create high-quality outdoor furniture products that meet design and durability standards. Key Responsibilities: Read and interpret technical drawings, blueprints, and specifications. Measure, cut, and fit metal components using hand tools, power tools, and welding equipment. Perform MIG/TIG welding on mild steel, stainless steel, and aluminum as required. Assemble frames and structures for outdoor furniture such as chairs, tables, loungers, and benches. Ensure all welds and joints meet quality and safety standards. Conduct finishing tasks such as grinding, polishing, and surface preparation. Collaborate with design and quality teams to ensure product accuracy and consistency. Maintain tools and equipment in good working condition. Follow all safety protocols and maintain a clean work environment. Required Skills & Qualifications: Proven experience as a Fitter/Welder in a manufacturing or metal fabrication environment. Proficiency in MIG and TIG welding techniques. Ability to read and interpret engineering drawings and fabrication blueprints. Familiarity with tools such as grinders, cutters, and measuring instruments. Strong attention to detail and quality. Physical stamina and ability to work in various positions and environments. Certification in welding (preferred but not mandatory). Preferred Experience: Experience in manufacturing outdoor or garden furniture . Knowledge of corrosion-resistant coatings and finishes. Understanding of ergonomic and aesthetic design principles in furniture. Job Type: Full-time Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Health insurance Leave encashment Life insurance Schedule: Fixed shift Supplemental Pay: Overtime pay Performance bonus Work Location: In person

Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colourful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles. We are currently looking for a Production Officer to join us at our facility in Savli. Key responsibilities: Demonstrate Core Values of Axalta i.e. Safety, Ethics and Valuing people. To achieve Planned Production target to meet the Market Demand. To ensure quality of the product as per required specification. To ensure generation of Quality Incidence Report for observed process deviations and work in team to resolve the same with QC, Process Engineer and Technical, if required. To take active part and support for Quality Complaints resolution, doing RCFA and implement CA and PAs’. Plan and arrange Raw Materials and Packaging Materials as per Production Plan, and responsible for shop floor RM/PM accounting and variance. To implement ISO 9000 requirements on shop floor and ensure all record generation, maintenance and smooth retrieval. Reporting of incident of any nature as per the site SHE procedures. Co-ordinate with Maintenance team for improving the performance of the Plant. To ensure healthy 5 “S” for AXALTA Savli Unit Basic safety knowledge of plant operation. Basic Knowledge on weight measurement process in filling and packaging area. Basic Knowledge on MRP printing and label Printing. Require knowledge on Excel and word in computer. To have basic understandings of different Paint processing equipments. Must be familiar with SAP transactions. To have basic knowledge of HMI and SCADA operation The Candidate will be working in the rotational Shift Duty. Candidate Experience Required - 2-3 Years Qualification- BSC/MSC/BTech/BE- Production Industry- Chemical/Paint/Coating/ Ink Team handling or IC role- IC Reporting into- Section head Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals. Our Company: Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colorful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles. Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals.

Entity: Production & Operations Job Family Group: Engineering Group Job Description: Would you like to discover how our diverse, hardworking people are leading the way in making energy cleaner and better – and how you can play your part in our world-class team? bp Technical Solutions India (TSI) centre in Pune, aims to build on bp’s existing engineering and technical strengths to deliver high quality services to its hydrocarbons and new energy businesses worldwide. TSI brings together diverse engineering capability to provide technical services across a range of areas including engineering, maintenance, optimization, data processes, projects and subsurface, to deliver safe, affordable and lower emission energy, while continuously innovating how we work. About Us: At bp, we’re reimagining energy for people and our planet. With operations working across almost every part of the energy system, we’re leading the way in reducing carbon emissions and developing more sustainable methods for solving the energy challenge. We’re a team with varied strengths of engineers, scientists, traders and business professionals determined to find answers to problems. But we know we can’t do it alone. We’re looking for people who share our passion for reinvention to bring a fresh opinion, ambition, and to challenge our thinking in our goal to achieve net zero! Let me tell you about the role : The Mechanical Engineer will join the bpTSI discipline engineering team to provide deep mechanical engineering expertise, oversight, judgment and support to Production & Operations (P&O) bp Solutions (bpS) Site Projects Team. What You Will Deliver Provide static mechanical and piping engineering expertise to P&O bp Solutions Site Projects teams Support the Site Projects Team and Engineering Contractor to deliver static mechanical and piping engineering scopes in front-end loading (FEL) and detailed engineering of projects, including to: provide technical oversight, review, guidance and approval of design engineering and construction contractor deliverables equipment specification in requisition/datasheets and selection as well as engineering package technical content review technical bid analysis of equipment provide technical evaluations of requests for exceptions/deviations to specifications or standards determine risks to project delivery and ensure adequate risk mitigation plans are in place work with engineering contractor(s) to verify they are performing required activities in line with project schedules, and assist bp’s Engineering Manager in contract performance management ensure that Engineering Contractor(s) apply bp’s Engineering Practices in engineering designs determine risks to project delivery and ensure adequate risk mitigation plans are in place provide mechanical expertise to project MoCs assure quality and consistency in static mechanical and equipment/package delivery and piping design on projects Review of Vendor Quality Control Plans, Inspection and Test Plans, documents and drawings Assist in preparation of factory acceptance test (FAT) and site acceptance test (SAT) plans record and share relevant learnings Provide mechanical expertise, technical support and facilitate as necessary in hazard identification and risk assessment processes, such as HAZID, HAZOP, and LOPA What You Will Need To Be Successful Must have educational qualifications: Bachelor’s Degree in Mechanical Engineering (or demonstrated equivalent) Preferred education/certifications: Chartered Engineer or registered professional engineer Minimum years of relevant experience: 8 years in oil and gas/petrochemical/ refining/ chemical or equivalent, with minimum five (5) years experience of Engineering work in Capital projects. Strong preference will be given to experience in brownfield projects. Total years of experience : 8-12 Years Must have experiences/skills: Strong technical knowledge and experience of engineering, maintenance, operation of mechanical equipment including troubleshooting support, reliability, obsolescence and equipment lifecycle issues in oil & gas processing facilities FEL-3 and Detailed Engineering experience on projects Required working knowledge of the following: Piping design Pipe stress calculations Specification, purchase and installation of static equipment Practical working knowledge of governing codes, industry standards (API, ASME, EN, PED, RToD, IEC, ISA, ATEX, IEEE, BS), local regulations relevant to mechanical, rotating equipment, corrosion, and materials engineering Excellent interpersonal skills to interact effectively with individuals across levels Track record of improving safety and reliability at an industrial facility, preferably oil/gas/petrochemical processing through engagement and influence Good to have experiences/skills: Experience in an operational environment, brownfield modifications, equipment skid packages design, front end engineering, scoping, technical evaluation Experience of working with remote team and collaborative approach to delivery Proven track record in cross-functional engineering improvements Accomplished in risk, process safety and contractor performance management Consistently delivers results under pressure You will work with Site Projects Engineering Manager Engineering Contractor(s) Mechanical and Rotating Equipment Discipline Engineering Team Other bp Discipline Engineers P&O bp Solutions Site Projects Teams Operations personnel Refinery Teams Shift Working hours (UK shift) to support Business Partners % travel requirements 10% Why Join our team? At bp, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity. We are committed to crafting an inclusive environment in which everyone is respected and treated fairly. Diversity Statement: At bp, we provide an excellent environment and benefits such as an open and inclusive culture, a great work-life balance, tremendous learning and development opportunities to craft your career path, life and health insurance, medical care package and many others! Diversity sits at the heart of our company and as an equal opportunity employer, we stay true to our mission by ensuring that our place can be anyone's place. We do not discriminate based on race, religion, colour, national origin, gender and gender identity, sexual orientation, age, marital status, veteran status or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application and interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is eligible for relocation within country Remote Type: This position is not available for remote working Skills: Anomaly assessment and management, Defect Elimination, Equipment criticality assessment, Equipment maintenance and inspection strategies, FAT and commissioning, Fatigue Analysis, Fitness for Service, Flanged joint, Integrity Management, Mechanical seals and support systems, Monitoring and data interpretation, Piping, hoses and tubing, Piping vibration, Pressure systems regulatory requirements, Pressure Vessels, Selection and design of pipeline equipment, Stress analysis for integrity and leakage, Valves used for isolation, Wind Turbines Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

AutoCAD Draftsman Job Description We are looking for a detail-oriented and technically proficient Draftsman to join our engineering team in Kochi. The ideal candidate will have experience in developing 2D and 3D drawings, collaborating with multidisciplinary teams, and contributing to infrastructure and engineering projects with precision and speed. AutoCAD Draftsman Responsibilities: Prepare 2D/3D CAD drawings for CP layouts, grounding systems, and installation schematics. Develop as-built drawings, wiring diagrams, and material take-offs. Collaborate with CP engineers to translate technical concepts into detailed drawings. Ensure drawings comply with NACE, ISO, and project-specific standards. Maintain drawing databases and version control using AutoCAD or MicroStation. Assist in material selection and quantity estimation for CP installations. Coordinate with civil, electrical, and structural teams for interdisciplinary alignment. AutoCAD Draftsman Requirements: Required Skills & Qualifications: Diploma or ITI in Drafting, Civil, Electrical, or Mechanical Engineering. 2–5 years of experience in drafting for CP or related infrastructure projects. Proficiency in AutoCAD (2D/3D); knowledge of MicroStation is a plus. Familiarity with CP components: anodes, rectifiers, test stations, cables, etc. Strong attention to detail and ability to meet tight deadlines. Good communication skills and ability to work in a multidisciplinary team. skills and ability to collaborate across teams Preferred Experience: Exposure to industrial, oil & gas, or urban infrastructure projects Understanding of cathodic protection design principles and corrosion control. Familiarity with International project standards is a plus Ability to read and adapt to international design codes and practices Job Type: Full-time Pay: ₹18,000.00 - ₹20,000.00 per month Ability to commute/relocate: Ernakulam, Kerala: Reliably commute or planning to relocate before starting work (Required) Education: Diploma (Preferred)

We are seeking a skilled and experienced Gas Pipeline Fitter to join our team in Bansh Beria, Kolkata. The ideal candidate will be responsible for installing, repairing, and maintaining gas pipelines and related systems in compliance with safety and industry standards. --- Key Responsibilities: Install and assemble gas pipelines, fittings, and regulators as per specifications and drawings Inspect existing pipelines for leaks, corrosion, or damages and perform necessary repairs Carry out scheduled maintenance and servicing of gas lines and associated equipment Ensure all work is carried out following safety protocols and statutory regulations Use appropriate tools and equipment to cut, thread, and join pipes Read and interpret blueprints, technical drawings, and installation guidelines Work closely with engineers, technicians, and site supervisors to ensure project completion Maintain accurate records of installations, repairs, and materials used --- Requirements: Proven experience as a gas pipeline fitter or similar role (minimum 2 years preferred) ITI/Diploma in Fitting, Plumbing, Mechanical, or relevant field Knowledge of gas pipeline standards, safety codes, and regulations Physical strength and stamina to handle heavy equipment and work in various outdoor conditions Ability to read technical drawings and follow installation instructions Strong attention to detail and problem-solving skills --- Preferred Skills: Certification in gas pipeline fitting or welding Basic understanding of pressure testing and gas flow systems Experience in both residential and industrial gas pipeline projects Job Types: Full-time, Permanent Pay: ₹10,000.00 - ₹12,000.00 per month Benefits: Health insurance Schedule: Day shift Application Question(s): Can you commute/travel to Bansh Beria, Bandel or Tribeni in Kolkata? How many years of Gas Pipeline fitting experience do you have? Work Location: In person

Company Description Vesuvius is a global leader in molten metal flow engineering and technology, primarily serving the global steel and foundry industries. We offer customized products, solutions, and services to help our customers increase efficiency, enhance quality, improve safety, and reduce costs and environmental impact. Our offerings include products, systems, and services that regulate and protect the flow of steel in the continuous casting process as well as enhance the control and monitoring of production processes. We also provide materials that withstand extreme temperatures and offer corrosion resistance at customer facilities. Role Description This is a full-time, on-site role for a Head of Manufacturing located in Visakhapatnam. The Head of Manufacturing will be responsible for overseeing production planning, ensuring operational excellence, and managing day-to-day manufacturing operations. Tasks will include ensuring adherence to Good Manufacturing Practice (GMP) standards, monitoring and enhancing operational efficiencies, and implementing strategies to improve production processes and outcomes. Qualifications Skills in Production Planning and Manufacturing Experience in Operational Excellence and Operations Management Good Manufacturing Practice (GMP) knowledge Strong leadership and team management skills Analytical and problem-solving abilities Excellent communication and interpersonal skills Experience in the steel or foundry industries is a plus Bachelor's degree in Engineering, Manufacturing, or a related field

Develop and maintain strategic long-term trusting relationships with high volume clients in Real Estate, Manufacturing, Infrastructure and related industries to accomplish organic growth and long-term company objectives. Develop strategic channel partners to generate volumetric sales for our Construction based waterproofing coatings and Corrosion protection coatings product portfolio. Research key customer wants and needs for clients from various industrial segments Suggest solutions that answer clients needs and wants Develop sales funnel for all coating products and services Serve as contact point for key customers and internal teams Resolve customers' complaints in an effective and respectful way Gather, report and communicate customers' feedback on service, technology and product delivery Research and source new potential clients Measure, track and analyze key account metrics Create reports for upper management Keep abreast with industry and market trends and best practices Job Types: Full-time, Permanent Pay: ₹305,045.69 - ₹510,253.95 per year Benefits: Health insurance Provident Fund Ability to commute/relocate: Pune, Maharashtra: Reliably commute or planning to relocate before starting work (Required) Application Question(s): Is your previous work experience in Construction Chemicals, Corrosion protection, Waterproofing, Epoxy - PU flooring industry? Education: Bachelor's (Preferred) Experience: Sales: 3 years (Preferred) Language: English (Preferred)

1. JOB RESPONSIBILITIES: Carry out RBI (re)assessment of static assets (Equipment/ Pipework) due for inspection in upcoming months Creation of Written Scheme of Examination (WSE) for Inspection, based on the outcome of RBI Assessment Corrosion Loop Boundary mark-up; CML mark-up on isometrics to sufficiently represent the corrosion Loop Carry out Equipment Condition History (ECH) review; Establish corrosion trend; Identify limiting component Populate RBI input template with all the needful data; upload the RBI input template in wIMS for RBI Study Create Equipment Strategy for RBI as well as for non-RBI type assets, as per the site approved procedure(s) Create ENG - 96 Document to extend the inspection interval (or Next Inspection Date), based on RBI studies Update RBI studies to incorporate the latest inspection findings; modify the RBI data and WSE accordingly Create of Corrosion Control document (CCD); review existing CCDs; Recommend improvement, if required -Carry out reliability study of Static equipment/assets to reduce the failure occurrence; conduct RCA studies Recommend material upgrade, dosing need etc, to improve the service life of assets in corrosive conditions Provide Inspection support to site Inspection and Integrity (I & I) team during planned or ad-hoc shutdowns Job Knowledge, Skills and Experience: Mechanical/Metallurgical Engineer graduate from premium engineering institute (IIT, BITS, NIT etc.) Professional experience of 5-10 years in Refinery, Petrochemical, Fertilizer and/or Oil-&-Gas sectors Knowledge and expertise in Corrosion, in-service Inspections, RBI, & Integrity management domains Well Familiar with common materials used in refinery, and their welding and PWHT requirements Thorough Knowledge of common API Codes and standards (API-510, API-570, API-580, API-571 etc.) Well-versed with reading and interpretation of Equipment Inspection reports, PFDs, P&IDs, GAD etc. Familiar with basic NDTs - DPT/UT/RT/MPT and advanced NDTs like PAUT, TOFD, IRIS, PEC, MFL etc. Good understanding of all the basic corrosion/damage mechanisms applicable to refinery industries Experience of working on Corrosion loop formation, Damage Mechanism assignment, CML mark-up Hands on experience of carrying out RBI assessment using wIMS/Meridium/ or other RBI software Excellent written and oral communication skill (Full professional level or better) in English language Should be comfortable travelling overseas (Stanlow, Chester, UK) once or multiple times every year Certifications (Good to have) API 510, API-570, API-580, API-571 Certification NACE Corrosion Technologist NDT Level-II certified in DPT/MPT/RT/UT CSWIP (preferred) Qualification B.Tech./M. Tech. in Metallurgical or Mechanical Engineering from a premier Institute (IIT, BITS, NIT etc.)

Entity: Production & Operations Job Family Group: Engineering Group Job Description: About Bp bp Technical Solutions India (TSI) center in Pune, aims to build on bp’s existing engineering and technical strengths to deliver high quality services to its hydrocarbons and new energy businesses worldwide! TSI brings together diverse engineering capability to provide technical services across a range of areas including engineering, maintenance, optimization, data processes, projects and subsurface, to deliver safe, affordable, and lower emission energy, while continuously innovating how we work! Intent The Corrosion Engineer will be providing corrosion and erosion modelling support across all of bp’s operations and projects. Systematically applying and continuously improving bp’s modelling capability. Proactively interact with other disciplines, sub-functions, and contractors to systematically resolve Corrosion related problems Responsibilities Provide corrosion modelling support to both operations and projects Providing erosion modelling support to both operations and projects Working with advisors and SME’s to interpret and apply the modelling output Build a centre of perfection for corrosion and erosion modelling Identify improvements and enhancements to the modelling toolset to provide value Integrate modeling with real time data to provide improved risk management Provide corrosion and materials engineering expertise to other squads across bp. Ensure pragmatic solutions are implemented to manage risk, production efficiency, defect elimination and standardization, to deliver safe, reliable, and compliant operations. Support corrosion threat assessments for regions and projects and development of Corrosion and Materials mitigation programs across IM and other teams. Work with digital or I&E engineering teams to develop corrosion & materials related technology programs, develop use cases for operations and projects and support deployment within operating regions. Support the development of central tools and processes, preparation of central guidance documents or procedures as required. Provide corrosion and materials engineering support to incident investigations, projects, etc. People and business related : Provide visible safety leadership in accordance with bp safety leadership principles, lifesaving rules and process safety fundamentals to model desired safety behaviours Record relevant learning in shared learning systems, incorporate into local activities, specifications/ practices/ procedures and raise high priority lessons Support performance management through implementation, measurement, and analysis of relevant KPI’s to drive continuous improvement. Education Degree in Chemistry or Chemical Engineering or a related discipline. Post graduate certification in Chemistry, Chemical Engineering PhD preferred. Experience And Job Requirements Minimum years of proven experience: Experience working in the field of Chemistry and Modelling. Must Have Experiences/skills. Corrosion modelling and application Technical expertise in several areas related to the discipline applied to Operations. These include: Chemical modelling Electrochemistry Surface chemistry Chemistry Erosion Trbilogy Familiar with industry standards for corrosion and integrity management and their application. People leadership, teamwork, and an ability to network and influence across organizational boundaries. Fluent in English, written and oral. Familiar with process design, process safety, and operating conditions of typical O&G units Individual must be highly motivated and a self-starter Good to have experiences/skills: Integrity management in oil and gas projects. Why join bp At bp, we support our people to learn and grow in a diverse and ambitious environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. There are many aspects of our employees’ lives that are significant, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others! We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is eligible for relocation within country Remote Type: This position is not available for remote working Skills: Advanced & Robotics Inspection Technologies, Advanced & Robotics Inspection Technologies, Agility core practices, Analytical Thinking, Commercial Acumen, Communication, Corrosion Management, Corrosion modelling, Creativity and Innovation, Data Management, Degradation monitoring, Degradation threat assessment, Digital fluency, Engineering Failure Analysis, Equipment preservation and protection, Erosion modelling, External degradation barrier selection, External degradation threats, Incident investigation and learning, Internal degradation barrier selection, Materials and corrosion design philosophy, Materials and weld performance limits, Materials manufacturing methods, Materials Non-Destructive Evaluation (NDE), Materials of construction {+ 10 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job Title Project Engineer Job Description Summary We are seeking a skilled Mechanical Engineer specializing in piping systems for our chemical processing plant. The candidate will be responsible for the design, engineering, installation, and maintenance of piping systems used in process operations, ensuring they meet industry codes, standards, and safety regulations. Job Description About the Role: Develop and review piping designs , layouts , and isometric drawings based on P&IDs and process requirements. Select appropriate materials and components for piping systems considering corrosion, pressure, temperature, and chemical compatibility. Perform stress analysis and ensure compliance with ASME, ANSI, API, and other relevant standards. Collaborate with process engineers, project managers, and other departments for seamless integration of piping in plant operations. Prepare and evaluate technical specifications , BOQs , and vendor drawings for piping equipment and systems. Supervise piping fabrication, installation, and testing at site (hydro test, pneumatic test, etc.). Conduct root cause analysis and troubleshoot piping issues during commissioning and operation. Maintain proper documentation and ensure compliance with environmental, health, and safety (EHS) guidelines. Work closely with contractors and third-party inspectors during project execution. About You: Bachelor’s degree in Mechanical Engineering (or related field). 8–10 years of experience in piping engineering, preferably in a chemical or process plant environment. Strong understanding of P&ID , pipe routing , supports , and stress analysis . Proficient in using design software like AutoCAD , Plant 3D , Caesar II , or equivalent. Familiar with codes and standards: ASME B31.3 , ANSI , API , TEMA , etc. Good communication skills and ability to work in a multidisciplinary team. Knowledge of hazardous area classifications and safe design practices in chemical plants. Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: “Cushman & Wakefield”

About LIN SCAN LIN SCAN provides comprehensive in-line inspection solutions for the oil and gas industry, ensuring pipeline integrity through highly accurate data for maintenance and repair programs. Committed to continuous product and service improvements, LIN SCAN boasts one of the world's largest fleets of intelligent in-line inspection tools, covering pipeline diameters from 2" to 56". Our expert team leverages cutting-edge technologies to design and manufacture innovative inspection systems. Job Responsibilities: As the Deputy Territory Director, you will oversee the Operations Department, ensuring adherence to corporate procedures and documentation by field personnel and project managers. Your responsibilities will include: Managing project execution within assigned territories Maintaining a First Tool Run Success Rate of at least 80% Ensuring smooth, safe, and productive day-to-day operations Fostering effective communication between the territory and corporate office through ERP systems and regular reporting Timely project planning, budget approval, and accurate manpower distribution Coordinating tool requirements and plans between Tool Management and Projects Aligning and coordinating manpower resource distribution plans with the Territory Director and Project Managers Overseeing and managing project cost estimates and control Ensuring the preparation of Project Information Documents (PIDs), including detailed execution plans, resource allocation, and project risk management plans Conducting quality assurance/quality control (QA/QC) of project documentation and ensuring relevant data storage at the corporate office Coordinating with sales on incoming projects and urgent requirements Handling critical budgetary arrangements Providing monthly project key performance indicators (KPIs) Ensuring timely submission of Field Investigation Reports (FIRs) and Tool Condition Reports Aligning data analysis plans with project requirements and priorities Overseeing QA/QC for incoming run data and valid Environmental Management System (EMS) updates Supporting recruitment, assessment, and decisions on project manpower Ensuring timely invoicing and collection, providing support to Finance on technical matters Liaising with other departments on potential project requirements Requesting and reviewing periodic reports to enhance information flow, organizational planning, and decision-making Ensuring adherence to quality and health, safety, and environment (HSE) procedures throughout project preparation and execution Maintaining daily communication with Regional Heads to review activities and project progress Skills/Experience: Degree in Business, Finance, or Technical Science Minimum 14 years of operation planning experience in the Oil and Gas sector, with at least 5 years in management Working knowledge of engineering challenges in the pipeline environment and experience with in-line inspection (ILI), pipeline inspection, integrity, pigging, cleaning, freezing, and hydro-testing projects Proven ability to manage a large, motivated team and oversee regional operations Strong IT and computing skills, with a specialized knowledge of Oil & Gas Software and Equipment. Proficiency in Microsoft Office is essential Accountability: Control over Operations personnel and manpower allocation Control over project schedules Project budget control Physical and Mental Requirements: Lifting and Carrying: Ability to lift and carry up to 50 pounds Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively Focus and Multitasking: Ability to maintain focus and multitask effectively Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments. Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary About PIPECARE Group: PIPECARE Group offers comprehensive In-Line Inspection Services to identify and size pipeline threats, Utilizing advanced technologies such as Magnetic Flux Leakage, Transverse Field Inspection, Ultrasound, and specialized tools, PIPECARE ensures precise detection and assessment of various pipeline anomalies. What we do: In-Line Inspection Services PIPECARE provides In-Line Inspection Services to locate, identify, and size threats, supporting integrity management requirements. Check out our AI Technology and other cutting-edge technologies by clicking the following YouTube Links: PIPECARE Group - YouTube SMART AI CALIPER - Inspection Experience Like Never Before Inspection Technologies Magnetic Flux Leakage (MFL): Detects and sizes general corrosion and metal loss anomalies, especially circumferentially oriented. Transverse Field Inspection (TFI): Detects and sizes general corrosion and metal loss anomalies, primarily axially oriented. Ultrasound (UT): Detects and sizes general and other metal loss anomalies with high depth sizing accuracy. Ultrasonic Crack Detection: Detects and sizes cracks and colonies of cracks. Caliper (Geometry): Detects and sizes deviations in the ideal circular shape of a pipeline (dents, ovalities, wrinkles, etc.). Specialized Tools and Technologies Combo Tools: Use multiple measurement systems in various combinations. Specialized Tubing Technologies: Designed for Furnace and Downhole Operations. Equal Opportunity Employer: We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Powered by JazzHR QvCsS9FY2m

About LIN SCAN LIN SCAN provides comprehensive in-line inspection solutions for the oil and gas industry, ensuring pipeline integrity through highly accurate data for maintenance and repair programs. Committed to continuous product and service improvements, LIN SCAN boasts one of the world's largest fleets of intelligent in-line inspection tools, covering pipeline diameters from 2" to 56". Our expert team leverages cutting-edge technologies to design and manufacture innovative inspection systems. Job Responsibilities As the Deputy Territory Director, you will oversee the Operations Department, ensuring adherence to corporate procedures and documentation by field personnel and project managers. Your responsibilities will include: Managing project execution within assigned territories. Maintaining a First Tool Run Success Rate of at least 80%. Ensuring smooth, safe, and productive day-to-day operations. Fostering effective communication between the territory and corporate office through ERP systems and regular reporting. Timely project planning, budget approval, and accurate manpower distribution. Coordinating tool requirements and plans between Tool Management and Projects. Aligning and coordinating manpower resource distribution plans with the Territory Director and Project Managers. Overseeing and managing project cost estimates and control. Ensuring the preparation of Project Information Documents (PIDs), including detailed execution plans, resource allocation, and project risk management plans. Conducting quality assurance/quality control (QA/QC) of project documentation and ensuring relevant data storage at the corporate office. Coordinating with sales on incoming projects and urgent requirements. Handling critical budgetary arrangements. Providing monthly project key performance indicators (KPIs). Ensuring timely submission of Field Investigation Reports (FIRs) and Tool Condition Reports. Aligning data analysis plans with project requirements and priorities. Overseeing QA/QC for incoming run data and valid Environmental Management System (EMS) updates. Supporting recruitment, assessment, and decisions on project manpower. Ensuring timely invoicing and collection, providing support to Finance on technical matters. Liaising with other departments on potential project requirements. Requesting and reviewing periodic reports to enhance information flow, organizational planning, and decision-making. Ensuring adherence to quality and health, safety, and environment (HSE) procedures throughout project preparation and execution. Maintaining daily communication with Regional Heads to review activities and project progress. Skills/Experience: Degree in Business, Finance, or Technical Science Minimum 14 years of operation planning experience in the Oil and Gas sector, with at least 5 years in management. Working knowledge of engineering challenges in the pipeline environment and experience with in-line inspection (ILI), pipeline inspection, integrity, pigging, cleaning, freezing, and hydro-testing projects. Proven ability to manage a large, motivated team and oversee regional operations. Strong IT and computing skills, with a specialized knowledge of Oil & Gas Software and Equipment. Proficiency in Microsoft Office is essential. Accountability: Control over Operations personnel and manpower allocation Control over project schedules Project budget control Physical And Mental Requirements Lifting and Carrying: Ability to lift and carry up to 50 pounds. Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells. Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively. Focus and Multitasking: Ability to maintain focus and multitask effectively. Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments. Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary. About PIPECARE Group PIPECARE Group offers comprehensive In-Line Inspection Services to identify and size pipeline threats, Utilizing advanced technologies such as Magnetic Flux Leakage, Transverse Field Inspection, Ultrasound, and specialized tools, PIPECARE ensures precise detection and assessment of various pipeline anomalies. What We Do In-Line Inspection Services PIPECARE provides In-Line Inspection Services to locate, identify, and size threats, supporting integrity management requirements. Check out our AI Technology and other cutting-edge technologies by clicking the following YouTube Links: PIPECARE Group - YouTube SMART AI CALIPER - Inspection Experience Like Never Before Inspection Technologies Magnetic Flux Leakage (MFL): Detects and sizes general corrosion and metal loss anomalies, especially circumferentially oriented. Transverse Field Inspection (TFI): Detects and sizes general corrosion and metal loss anomalies, primarily axially oriented. Ultrasound (UT): Detects and sizes general and other metal loss anomalies with high depth sizing accuracy. Ultrasonic Crack Detection: Detects and sizes cracks and colonies of cracks. Caliper (Geometry): Detects and sizes deviations in the ideal circular shape of a pipeline (dents, ovalities, wrinkles, etc.). Specialized Tools and Technologies Combo Tools: Use multiple measurement systems in various combinations. Specialized Tubing Technologies: Designed for Furnace and Downhole Operations. Equal Opportunity Employer: We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Company Description Get FiBAR | GFRP rebar is the leading manufacturer and supplier of FiBAR® - GFRP rebar. Our products are stronger, lighter, cheaper, and corrosion-free. Based in Mumbai, we provide high-quality, innovative solutions to meet the demands of modern construction projects. Role Description This is a full-time, on-site Civil Engineer role located in Mumbai. The Civil Engineer will be responsible for civil engineering design, planning, stormwater management, and overall civil engineering tasks. Daily tasks include developing and executing project plans, coordinating with other engineers and stakeholders, ensuring compliance with local regulations, and overseeing project progress from conception to completion. Qualifications Proficient in Civil Engineering Design and general civil engineering practices Experience in planning and executing civil engineering projects Skilled in Stormwater Management strategies and solutions Strong understanding of civil engineering principles and standards Excellent written and verbal communication skills Ability to work independently and as part of a team Bachelor's degree in Civil Engineering or related field Professional Engineer (PE) license or equivalent certification is a plus

Critical Skills & Personal Attributes: Experience in reputed manufacturing industry in Oil & Gas, Heavy Fabrication, Heavy Machining and Sheet metal Industry. Familiar with general engineering, assembly drawings of process equipment’s, customer specifications, WPS, WPQ, PQR, NDE, Destructive Testing, Welding defects, welding process, PWHT, Grinding, weld preparation, HSE, PPE etc. Main responsibility : 1. Welding Operations: Perform GTAW (TIG) welding on pressure vessels, pipes, and subsea components with precision. Have experience in 6G, 5G, 3G position. Carry out Inconel cladding operations for corrosion-resistant overlays on critical components. Execute cladding operations on pressure vessels using GTAW techniques to meet industry standards. Operate automated and manual cladding systems for overlay welding applications. Follow Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQRs). 2. Quality Control & Inspection: Ensure compliance with ASME Section IX, API and other welding codes. Perform visual and dimensional inspections of welds to verify quality standards. Assist in non-destructive testing (NDT), including radiographic (X-ray), ultrasonic, PT, and MT inspections. Monitor weld parameters such as heat input, interpass temperature, and bead consistency. Ensure proper fusion, penetration, and weld integrity per specifications. Conduct visual inspection of welds to identify defects such as cracks, porosity, and lack of fusion 3. Blueprint Interpretation & Documentation: Read and interpret engineering drawings, blueprints, and fabrication schematics. Ensure proper fit-up, joint preparation, and weld sequencing for pressure-retaining components. Maintain welding logs and documentation per project and client requirements. 4. Equipment Handling & Safety Compliance: Set up and operate TIG welding machines, gas flow regulators, and purging systems. Follow safety procedures and PPE guidelines for welding operations. Handle welding gases such as argon and helium for purging and shielding. Maintain clean and organized work areas, ensuring compliance with workplace safety standards. 5. Process Optimization & Team Collaboration: Work closely with production engineers and quality control teams to optimize welding processes. Support continuous improvement initiatives to enhance efficiency and productivity. Train and mentor junior welders to maintain company standards. Qualifications & Skills: Education & Certifications: High school diploma or equivalent (Technical diploma in welding preferred). Certified Welder (ASME Section IX, AWS D1.1, API 1104) – preferred. Additional welding certifications in Inconel cladding and pressure vessel fabrication are a plus. Experience: Minimum 5+ years of experience in GTAW (TIG) welding on pressure vessels, pipes, and subsea products. Proven expertise in inconel cladding and overlay welding techniques. Strong understanding of metallurgy, welding defects, and material properties. Skills & Abilities: Ability to work with tight tolerances and complex welding specifications. Familiarity with automated and semi-automated cladding equipment. Strong knowledge of NDT processes and quality control standards. Ability to work in a fast-paced, high-precision manufacturing environment. Strong problem-solving skills and attention to detail.

Job Title Project Engineer Job Description Summary We are seeking a skilled Mechanical Engineer specializing in piping systems for our chemical processing plant. The candidate will be responsible for the design, engineering, installation, and maintenance of piping systems used in process operations, ensuring they meet industry codes, standards, and safety regulations. Job Description About the Role: Develop and review piping designs, layouts, and isometric drawings based on P&IDs and process requirements. Select appropriate materials and components for piping systems considering corrosion, pressure, temperature, and chemical compatibility. Perform stress analysis and ensure compliance with ASME, ANSI, API, and other relevant standards. Collaborate with process engineers, project managers, and other departments for seamless integration of piping in plant operations. Prepare and evaluate technical specifications, BOQs, and vendor drawings for piping equipment and systems. Supervise piping fabrication, installation, and testing at site (hydro test, pneumatic test, etc.). Conduct root cause analysis and troubleshoot piping issues during commissioning and operation. Maintain proper documentation and ensure compliance with environmental, health, and safety (EHS) guidelines. Work closely with contractors and third-party inspectors during project execution. About You Bachelor’s degree in Mechanical Engineering (or related field). 8–10 years of experience in piping engineering, preferably in a chemical or process plant environment. Strong understanding of P&ID, pipe routing, supports, and stress analysis. Proficient in using design software like AutoCAD, Plant 3D, Caesar II, or equivalent. Familiar with codes and standards: ASME B31.3, ANSI, API, TEMA, etc. Good communication skills and ability to work in a multidisciplinary team. Knowledge of hazardous area classifications and safe design practices in chemical plants. Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: “Cushman & Wakefield”

Position Overview We are seeking an experienced Senior Engineer for our Supplier Quality Assurance team to lead supplier quality initiatives, ensure compliance with automotive quality standards, and drive continuous improvement across our supply chain. This role requires a detail-oriented professional with strong technical expertise in supplier quality and supplier relationship management. Experience Required 4-6 years of relevant experience in supplier quality assurance, automotive quality systems, or related manufacturing quality roles. Key Responsibilities: Quality Management Systems Implement and maintain ISO 9001 and IATF 16949 quality management systems across supplier Ensure supplier compliance with automotive quality standards and customer-specific requirements Lead quality system assessments and gap analyses for continuous improvement Supplier Management & Auditing Conduct comprehensive supplier audits to evaluate quality capabilities and compliance Manage supplier PPAP (Production Part Approval Process) activities and documentation review Perform supplier evaluations and qualification processes for new and existing vendors Develop and maintain supplier scorecards and performance metrics Inspection & Quality Control Execute receipt parts inspection procedures and protocols for electrical, electronic, connector, plastic, and sheet metal components Develop and implement child parts inspection standards and procedures across multiple component Analyse defects and non-conformances in electrical assemblies, electronic circuits, connector systems, plastic moulded parts, and sheet metal fabrications Ensure proper non-conformance closure and root cause analysis completion for all component types Compliance & Certifications Manage RoHS compliance verification and documentation Coordinate UL certification processes and maintain certification records Ensure regulatory compliance across all supplier quality activities Systems & Process Improvement Utilize ERP systems for quality data management and reporting Drive continuous improvement initiatives to enhance supplier quality performance Develop and implement process improvements to reduce defects and improve efficiency Create and maintain quality documentation, procedures, and work instructions Required Qualifications Technical Skills ISO 9001 - Thorough understanding and practical application experience IATF 16949 - Automotive quality management system expertise Supplier Audit - Proven experience conducting supplier assessments Receipt Parts Inspection - Hands-on experience with incoming inspection processes Supplier PPAP - Strong knowledge of Production Part Approval Process Continuous Improvement - Experience with Lean, Six Sigma, or similar methodologies RoHS Compliance - Understanding of environmental compliance requirements UL Certification - Experience with safety certification processes ERP Knowledge - Proficiency in enterprise resource planning systems Defect Analysis - Strong analytical skills for root cause analysis Component & Material Expertise Electrical Components - Knowledge of electrical parts quality requirements, testing standards, and failure analysis Electronics - Understanding of electronic component specifications, reliability testing, and quality control methods Connectors - Experience with connector quality standards, contact resistance testing, and environmental durability requirements Plastic Parts - Knowledge of plastic material properties, injection molding defects, dimensional tolerances, and aging characteristics Sheet Metal - Understanding of sheet metal fabrication processes, surface treatments, dimensional accuracy, and corrosion resistance requirements Educational Background Bachelor's degree in Engineering, Quality Management, Manufacturing, or related field Core Competencies Strong analytical and problem-solving abilities Excellent communication and interpersonal skills Ability to work independently and manage multiple priorities Preferred Qualifications Experience in automotive, electrical, or electronics manufacturing industry Knowledge of statistical process control (SPC) and measurement system analysis (MSA) Experience with supplier development and capability building Knowledge of environmental and safety regulations Understanding of component-specific testing methods (electrical testing, environmental stress screening, mechanical testing for connectors, plastic material testing, sheet metal dimensional verification) Familiarity with industry standards for electrical/electronic components (IPC, IEC, ASTM standards)

Job Requirements Qualifications: Engineering degree in Metallurgy, Chemical, Mechanical OR Pipeline engineering 4 to 15 years of oil gas experience in related industry (Onshore/Offshore pipeline projects and design) Should have sound knowledge on Oil & Gas upstream and downstream business in the following areas Risk Based Inspection methodologies Fracture Mechanics, Flow Assurance, Stress Analysis Engineering assessment of different pipeline damage mechanisms Fixed equipment inspection tasks/ procedures Inspection Optimization Fitness for Service & Life extension studies Repair scope preparation Familiarity with codes and standards Knowledge of software (CAESAR, OLGA, Pestra, Credo, Meridium etc.) Excellent verbal & written communication Should be able to perform pipeline risk assessments of Offshore & Onshore pipelines Should have knowledge of corrective and preventative maintenance strategy Good interpersonal skills and working collaboratively with the other teams Experience with Office applications (Word, Excel, and Power Point) Work Experience Key Job Accountabilities: Performing or advising the checks on data accuracy for different damage mechanism in coordination with other inspection datasets, corrosion monitoring etc. Provides technical and operational support and performs as technical pipeline integrity expert and ensures technical advisory support to all operating areas. Supporting the development, implementation and maintenance of Pipeline Integrity Management system (PIMS) based on the best industry standards supported by computerized system for the management of Threats and Risks, Mitigation Plan, Discovery Management, Integrity Assessment and Performance Monitoring and link program scope with execution activity. Identify, evaluate and implement appropriate new technologies available in the market. Prepares and maintains short and long term pipeline inspection plans based on Company approved inspection strategy. Prepares scope of work for subsea / onshore pipeline inspections including ILI, ROV surveys, CP surveys and any ad-hoc inspections. Ensure all UWI & ILI findings and observations are professionally assessed and classified. Generate technical recommendations and support implementation until satisfactory close-out. Performing internal high end engineering assessments as dents, cracks, free span, buckling etc. Participate in Root Cause Failure Analysis (RCFA), Incident Investigations, SHE reviews (HAZOPs, HAZIDs, risk assessments) Interfaces with Quality groups, performs necessary studies to support the development or understanding of new technologies. Provide integrity input for proposed future pipelines to ensure the facilities and associated documentation are fit and have been designed with long-term integrity considerations. Drive core team members to recruit skilled resources and train internal resources to build required competency

Job Requirements Degree: Engineering degree in Metallurgy, Chemical, or Petrochemical Engineering. Experience: 4 to 15 years in oil & gas industry (onshore/offshore/ pipeline projects and design) Refining and petrochemicals experience is a bonus. Industry Knowledge: Oil & Gas upstream and downstream operations. Risk-Based Inspection (RBI) methodologies. Chemical Injection Programs and fluid chemistry. Engineering assessment of damage mechanisms. Inspection tasks, procedures, and optimization for fixed equipment. Fitness-for-service and life extension studies based on corrosion damage. Preparation of repair scopes. Standards & Codes: Familiarity with relevant codes and standards. Software: Proficiency with Pestra, Credo, Meridium, etc. Communication: Strong verbal and written communication skills. Interpersonal Skills: Ability to work collaboratively with cross-functional teams. Office Tools: Proficient in Microsoft Office (Word, Excel, PowerPoint). Maintenance: Expertise in corrective and preventive maintenance strategies. Work Experience Key Job Accountabilities: Material Selection & Corrosion Control: Experience in developing key deliverables like corrosion control philosophies and integrity operating windows. Data Accuracy in Damage Mechanisms: Ability to ensure data accuracy for damage mechanisms through collaboration with inspection datasets and corrosion monitoring. Corrosion Mitigation Techniques: Expertise in corrosion mitigation based on fluid chemistry, corrosion inhibitors, metallurgy, operating environments, and degradation mechanisms. Corrosion Management Audits: Involvement in auditing corrosion management strategies and collaborating with vendors to optimize chemical injection and monitoring programs. Technology Implementation: Ability to identify, evaluate, and implement new technologies for improved corrosion control and integrity management. Contract Management: Skills in preparing and maintaining short- and long-term corrosion mitigation contracts. Chemical Treatment Optimization: Expertise in monitoring chemical treatment programs and recommending cost-effective optimizations.

About us At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world’s largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society’s evolving needs. Learn more about our What and our Why and how we can work together . ExxonMobil’s affiliates in India ExxonMobil’s affiliates have offices in India in Bengaluru, Mumbai and the National Capital Region. ExxonMobil’s affiliates in India supporting the Product Solutions business engage in the marketing, sales and distribution of performance as well as specialty products across chemicals and lubricants businesses. The India planning teams are also embedded with global business units for business planning and analytics. ExxonMobil’s LNG affiliate in India supporting the upstream business provides consultant services for other ExxonMobil upstream affiliates and conducts LNG market-development activities. The Global Business Center - Technology Center provides a range of technical and business support services for ExxonMobil’s operations around the globe. ExxonMobil strives to make a positive contribution to the communities where we operate and its affiliates support a range of education, health and community-building programs in India. Read more about our Corporate Responsibility Framework. To know more about ExxonMobil in India, visit ExxonMobil India and the Energy Factor India. What role you will play in our team The Flow Assurance Engineer is responsible for the design of oil and gas production systems and assessment of their operability, including wells, flow lines and risers, production and injection facilities, and pipelines. The Flow Assurance Engineer will use analytical and computational tools to predict the transient multiphase flow and thermal behavior of the production system and develops and documents functional requirements and operational strategies to prevent, mitigate, and remediate vulnerabilities associated with gas hydrate formation, wax deposition, and other solids What you will do During the project cycle, Flow Assurance Engineers conduct technical studies to assess system operability, including: Fluid characterization using a thermodynamic simulator to model the PVT behavior of produced fluids Steady-state, single-phase flow modeling to size gas and/or water injection systems and pipelines Steady-state, multiphase fluid modeling to design production systems, including functional requirements for artificial lift and/or thermal insulation Transient, multiphase fluid modeling to assess thermal and hydraulic transients during production rate changes, turndown, startup, shutdown, and blow-down; including flow line and riser slugging, cool-down, and warm-up. Use of modeling and/or laboratory analysis to predict and assess solid formation, deposition, bedding and/or blockage behavior for hydrates, sand, wax, scale, asphaltenes, and other solids. Assessment of erosion and/or corrosion to guide proper material selection, conducted in collaboration with Materials Engineers. About You Skills and Qualifications. Bachelor's degree in engineering preferably in Chemical/Mechanical or Petroleum from a recognized university with CGPA 6.5 and above Minimum 3 years’ experience in Flow Assurance Minimum 2 years' experience in working software OLGA or PIPESIM Willingness and ability to travel internationally Demonstrated work experience as a flow assurance engineer on an oil or gas field development project Demonstrated work experience in development of multicomponent fluid characterizations using a thermodynamic or process simulator, such as PVTSIM, HYSYS, or equivalent Strong verbal communication and writing skills Should not have attended an interview for Flow Assurance Engineer position in the last 1 year Preferred Qualifications/ Experience Formal training and demonstrated work experience in OLGA transient multiphase flow modeling Demonstrated work experience in prediction of gas hydrate formation and development of operational strategies for hydrate blockage prevention Demonstrated work experience in oil and gas process modeling, using HYSYS or equivalent Knowledge of Pipeline and Subsea engineering Your benefits An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance and life. We offer you: Competitive compensation Medical plans, maternity leave and benefits, life, accidental death and dismemberment benefits Retirement benefits Global networking & cross-functional opportunities Annual vacations & holidays Day care assistance program Training and development program Tuition assistance program Workplace flexibility policy Relocation program Transportation facility Please note benefits may change from time to time without notice, subject to applicable laws. The benefits programs are based on the Company’s eligibility guidelines. Stay connected with us Learn more about ExxonMobil in India, visit ExxonMobil India and Energy Factor India. Follow us on LinkedIn and Instagram Like us on Facebook Subscribe our channel at YouTube EEO Statement ExxonMobil is an Equal Opportunity Employer: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin or disability status. Business solicitation and recruiting scams ExxonMobil does not use recruiting or placement agencies that charge candidates an advance fee of any kind (e.g., placement fees, immigration processing fees, etc.). Follow the LINK to understand more about recruitment scams in the name of ExxonMobil. Nothing herein is intended to override the corporate separateness of local entities. Working relationships discussed herein do not necessarily represent a reporting connection, but may reflect a functional guidance, stewardship, or service relationship. Exxon Mobil Corporation has numerous affiliates, many with names that include ExxonMobil, Exxon, Esso and Mobil. For convenience and simplicity, those terms and terms like corporation, company, our, we and its are sometimes used as abbreviated references to specific affiliates or affiliate groups. Abbreviated references describing global or regional operational organizations and global or regional business lines are also sometimes used for convenience and simplicity. Similarly, ExxonMobil has business relationships with thousands of customers, suppliers, governments, and others. For convenience and simplicity, words like venture, joint venture, partnership, co-venturer, and partner are used to indicate business relationships involving common activities and interests, and those words may not indicate precise legal relationships.

About The Position The Quality Engineer is part of the Materials, Equipment, and Quality team within Chevron’s ENGINE Center and provides support to Capital Projects and Business Unit Operations. This role will ensure Nondestructive Evaluation (NDE) systems, tools, methodologies, governance, and assurance are operationalized to remain competitive, improve predictability, mitigate risk, and to help generate leading performance outcomes. This role provides subject matter expert level consulting services to project and business leaders and peers, to enable successful application of NDE tools and processes across the enterprise. Key Responsibilities Interface with downstream, upstream and projects worldwide in multiple time zones to provide guidance on advanced NDE methods in Ultrasonics, Electromagnetics and Radiography Perform on-site advanced NDE inspections for critical Fitness-for-Service evaluations and cost optimization at BU's and Projects globally Champion Non-Intrusive Inspections (NII) for manufacturing facilities and projects by providing guidance and performing advanced inspections for better turn around performance Facilitate within Business Units and Projects using a risk-based approach Chevron's Performance Demonstration Qualification (PDQ) for contractor NDE personnel. Provide detailed NDE procedure reviews and witness qualifications to applicable codes and standards Deliver NDE training to BU's and Projects and Project partners such as EPC's in NDE methods and provide certification support. Perform research and development on new and emerging NDE technologies that have a direct impact on process safety Participate and be a core member of Chevron's Community of Practice (CoP) and participate in regional JIP and Consortiums in NDE area. Develop and maintain risked based NDE management systems, plans, and tools with customers, and internal and external partners, and provide overall oversight and assurance to project and facility operations and turn around activities. Oversee and participate in NDE Assurance activities and participate on cross functional teams and on industry committees. International travel and working outside of normal business hours shall be required to support customers. Required Qualifications BS Engineering in one of the core disciplines - Chemical, Mechanical, Electrical from a recognized (AICTE) university Advanced Ultrasonic and Electromagnetic certifications in Phased Array, Time of Flight Diffraction, Eddy Current/Remote field Minimum of 3 ASNT or ISO Level III certifications Successful passing of Chevron Performance Demonstration (PDQ) Qualifications or equivalent ASNT – ISQ examination. Extensive knowledge of all applicable codes such as ASME, ISO, AWS, API, and DNV Experience performing advanced ultrasonic procedure qualifications (PAUT) to ASME and API codes Preferred Qualifications 10+ years’ experience in Non-destructive testing, Asset Integrity and inspection area. Previous representation and participation in industry committees such as API, ASME, and ASNT Demonstrated working knowledge of corrosion damage mechanisms and how they affect fixed equipment. Experience inspecting sub-sea pipeline welds utilizing automated ultrasonics and qualifying to industry standards Hands on expertise on critical issues leveraging all advanced inspection techniques including Ultrasonics, Electromagnetics, Radiography. Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

Sulfuric acid And oxalic acid anodizing with dye process. • Zinc phosphate process. • Chromium Plating. • Powder coating. • Masking knowledge. • SAP handling. • Hard acid anodizing with dye process. • Impregnation process with leak arrest in porosity in the parts. • Sulfuric and oxalic acid combined anodizing with polishing and dye process. • Anodizing automation process with SCADA. • Knowledge about the 7QC Tools. • Ability to read & understand the Drawings and customer specifications. • Knowledge about QMS, EMS, OHASA. • Knowledge of LTMS handling and dye analysis. • Mixed dye preparation and color achievement. (L,a,b) values. • Knowledge of Chemical polishing & the bath maintaining and thatsstage gloss achievement. • CYS Analysis and Parts handling. • WIP Update. • Achieve Plan Vs Actual.

Company Description Megasonic Inspection Services, incorporated in 1992, is a reliable and well-known service provider specializing in Testing Services, Welding Services, NDT Consultancy Services, and Third Party Inspection Services. Our extensive expertise and reputation make us a trusted partner in the industry. Our team is dedicated to delivering high-quality services and ensuring the highest standards in testing and inspections. Role Description This is a full-time, on-site role for an NDT Technician located in Thane. The NDT Technician will conduct non-destructive testing using various methods including eddy current, ultrasonics, and inspection techniques. Tasks include preparing inspection reports, ensuring compliance with quality control standards, and identifying corrosion or defects in materials. The NDT Technician will also be responsible for collaborating with other team members and clients to achieve inspection and testing objectives. Qualifications Proficiency in Eddy Current and Ultrasonics techniques Experience in Quality Control and conducting Inspections Knowledge of Corrosion detection and analysis Excellent technical and analytical skills Strong attention to detail and problem-solving abilities Ability to work independently on-site and as part of a team Relevant certifications in NDT techniques are a plus Bachelor's degree in Engineering, Materials Science, or related field is preferred