447 Corrosion Jobs - Page 2

Role About The Role The Laboratory Chemist will be responsible for conducting chemical analysis and testing on various materials used in aerospace surface treatments. This position involves developing and optimizing chemical processes to improve product quality and performance. The role requires ensuring compliance with safety and environmental standards while working with hazardous materials. Monitor the quality of surface treatments applied, ensuring compliance with industry standards and customer specifications. Troubleshoot and resolve any technical issues related to surface treatment processes and equipment. Conduct regular inspections and audits of the surface treatment area to maintain safety and cleanliness standards. Monitor critical process parameters (e.g., temperature, current density, pH, chemical concentration) to ensure consistent quality. Ensure strict adherence to process specifications, work instructions, and control plans. Report and manage non-conformities through root cause analysis and corrective actions. Inspect incoming chemicals and plating salts for quality compliance. Analyze test panels or actual treated components for coating thickness, adhesion, corrosion resistance, etc. About The Team You will work closely with a multidisciplinary team of engineers, production staff, and quality control personnel. The team focuses on collaboration and innovation to enhance surface treatment processes for aerospace applications. Emphasis is placed on continuous improvement and fostering a culture of safety and excellence within the lab environment. You Are Responsible For Performing routine and specialized analyses on coatings, chemicals, and substrates to assess their performance and compatibility. Documenting experimental results and maintaining accurate records of laboratory activities and findings. Collaborating with production teams to troubleshoot and improve existing surface treatment processes based on laboratory results. To succeed in this role – you should have the following: A degree in Chemistry, Chemical Engineering, or a related field, with relevant laboratory experience. Strong knowledge of chemical properties, processes, and laboratory safety protocols. Proficiency in analytical techniques and instrumentation commonly used in a chemistry laboratory. Excellent problem-solving skills and the ability to work independently as well as part of a team. Effective communication skills to present findings and collaborate with colleagues across various departments.

Senior Engineer-Supplier Quality AssurancePosition Overview We are seeking an experienced Senior Engineer for our Supplier Quality Assurance team to lead supplier quality initiatives, ensure compliance with automotive quality standards, and drive continuous improvement across our supply chain. This role requires a detail-oriented professional with strong technical expertise in supplier quality and supplier relationship management. Experience Required 4-6 years of relevant experience in supplier quality assurance, automotive quality systems, or related manufacturing quality roles. Key ResponsibilitiesQuality Management Systems Implement and maintain ISO 9001 and IATF 16949 quality management systems across supplier Ensure supplier compliance with automotive quality standards and customer-specific requirements Lead quality system assessments and gap analyses for continuous improvement Supplier Management & Auditing Conduct comprehensive supplier audits to evaluate quality capabilities and compliance Manage supplier PPAP (Production Part Approval Process) activities and documentation review Perform supplier evaluations and qualification processes for new and existing vendors Develop and maintain supplier scorecards and performance metrics Inspection & Quality Control Execute receipt parts inspection procedures and protocols for electrical, electronic, connector, plastic, and sheet metal components Develop and implement child parts inspection standards and procedures across multiple component Analyze defects and non-conformances in electrical assemblies, electronic circuits, connector systems, plastic molded parts, and sheet metal fabrications Ensure proper non-conformance closure and root cause analysis completion for all component types Compliance & Certifications Manage RoHS compliance verification and documentation Coordinate UL certification processes and maintain certification records Ensure regulatory compliance across all supplier quality activities Systems & Process Improvement Utilize ERP systems for quality data management and reporting Drive continuous improvement initiatives to enhance supplier quality performance Develop and implement process improvements to reduce defects and improve efficiency Create and maintain quality documentation, procedures, and work instructions Required QualificationsTechnical Skills ISO 9001 - Thorough understanding and practical application experience IATF 16949 - Automotive quality management system expertise Supplier Audit - Proven experience conducting supplier assessments Receipt Parts Inspection - Hands-on experience with incoming inspection processes Supplier PPAP - Strong knowledge of Production Part Approval Process Continuous Improvement - Experience with Lean, Six Sigma, or similar methodologies RoHS Compliance - Understanding of environmental compliance requirements UL Certification - Experience with safety certification processes ERP Knowledge - Proficiency in enterprise resource planning systems Defect Analysis - Strong analytical skills for root cause analysis Component & Material Expertise Electrical Components - Knowledge of electrical parts quality requirements, testing standards, and failure analysis Electronics - Understanding of electronic component specifications, reliability testing, and quality control methods Connectors - Experience with connector quality standards, contact resistance testing, and environmental durability requirements Plastic Parts - Knowledge of plastic material properties, injection molding defects, dimensional tolerances, and aging characteristics Sheet Metal - Understanding of sheet metal fabrication processes, surface treatments, dimensional accuracy, and corrosion resistance requirements Educational Background Bachelor's degree in Engineering, Quality Management, Manufacturing, or related field Core Competencies Strong analytical and problem-solving abilities Excellent communication and interpersonal skills Ability to work independently and manage multiple priorities Preferred Qualifications Experience in automotive, electrical, or electronics manufacturing industry Knowledge of statistical process control (SPC) and measurement system analysis (MSA) Experience with supplier development and capability building Knowledge of environmental and safety regulations Understanding of component-specific testing methods (electrical testing, environmental stress screening, mechanical testing for connectors, plastic material testing, sheet metal dimensional verification) Familiarity with industry standards for electrical/electronic components (IPC, IEC, ASTM standards)

The ideal candidate is a motivated, well-organized individual who has a deep understanding of prospecting and developing strong relationships with customers in the building and construction materials sector. Responsibilities Develop and execute strategies to drive business in new and existing markets Develop and maintain strategic long-term trusting relationships with high volume clients in Real Estate, Manufacturing, Infrastructure and related industries to accomplish organic growth and long-term company objectives. Develop strategic channel partners to generate volumetric sales for our Construction based waterproofing coatings and Corrosion protection coatings product portfolio. Research key customer wants and needs for clients from various industrial segments Suggest solutions that answer clients needs and wants Develop sales funnel for all coating products and services Serve as contact point for key customers and internal teams Resolve customers' complaints in an effective and respectful way Gather, report and communicate customers' feedback on service, technology and product delivery Research and source new potential clients Measure, track and analyze key account metrics Create reports for upper management Keep abreast with industry and market trends and best practices Qualifications Bachelor's degree or equivalent experience in Business 3+ years' of sales experience in building materials, construction chemicals, anticorrosion and waterproofing coatings, paints Excellent written and verbal communication skills

Job Title: Corrosion Engineer Industry: Oil & Gas Experience - 15 + Years Job Description: We are looking for a Corrosion Engineer for an Oil & Gas project to ensure the integrity of pipelines, equipment, and infrastructure. Key Responsibilities: Candidate should have sound knowledge of Engineering Materials, Corrosion Management / Corrosion Control techniques. Candidate should be familiar with corrosion-related codes and standards; Candidate will be a key role for performing activities such as review / preparation of deliverable pertaining to material selection, RBI / studies for offshore facilitie s of domestic and international clients. Review and development of painting coating specifications and response to interdisciplinary issues. Manage corrosion protection systems and materials selection .

Company Description RANDSTARD LIMITED is a transportation, trucking, and railroad company based out of 10B Caldwell Street, London, United Kingdom. Role Description This is a full-time, on-site role for an NDT Technician located in Kashipur. The NDT Technician will be responsible for conducting various non-destructive testing methods including eddy current, quality control, corrosion inspections, and ultrasonics. Daily tasks will include performing inspections, ensuring adherence to safety protocols, compiling inspection reports, and maintaining testing equipment in good condition. Qualifications Proficiency in Eddy Current and Ultrasonics techniques Experience in Quality Control and Corrosion inspection Strong Inspection skills Attention to detail and ability to maintain accurate records Excellent problem-solving capabilities Valid NDT certification is preferred Ability to work independently and on-site High school diploma or equivalent; additional technical training is a plus

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. We believe in the power of diversity and inclusion and cultivate a workplace culture of belonging that views uniqueness as a competitive edge and builds a community that enables our people to push the limits of innovation to make great products that create value and improve people's lives. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Junior Engineer - Process Engineering in Coimbatore, India. What a typical day looks like: Create Visual aids like wire diagrams, crimping tools diagrams, Soldering and gluing and marking templates ensure that wires are prepared according to specifications. Create Visual aids to visually examining connectors and terminals for damage, corrosion, and loose connections. Create Visual aids to visualize the complex layout of wires, connectors, and their connections, enabling technicians to accurately cut, route, and assemble harnesses. Understanding and following technical drawings, blueprints, schematics and diagrams to assemble harnesses accurately. Identifying and resolving issues with wire harnesses and their components. Assembly of wiring harnesses using hand tools and proper assembly techniques Estimate process cycle time based on the process documents and customer documents Create Wiring PFMEA, Deviation and maintain all process documentations. The experience we’re looking to add to our team: Bachelor’s degree – ECE / EEE / Mechanical with 0 – 2 years of experience in manufacturing industry preferably in EMS Industry. Knowledge in SMT Process, PCBA, Mechanical assembly, Manufacturing tools and fixture design etc., Skilled in Fixture Tools design software like SolidWorks, Auto CAD, Creo etc. Knowledge in Wiring Harness assembly, Mechanical assembly, Manufacturing tools and fixture design etc.. Should have very good knowledge in Manufacturing tool designing process. Recognize the manufacturing process, technologies, techniques, and the product. Experience in cutting wires to the desired length, stripping insulation, Crimping terminals onto the stripped ends of wires, soldering, gluing and marking wires for identification. Experience in various tools and machines, including wire measuring and cutting machines, crimping tools, and testing equipment. Knowledge & direct experience in NPI operations and manufacturing engineering. Flexibility and adaptability to work in a dynamic startup environment. Work with other engineering team members to improve existing design or Process. Knowledge of MS office and MS outlook Excellent written and oral communication skills MANDATORY. Good analytical skills. Coaching & mentoring skills. Should be open for shifts. What you’ll receive for the great work you provide: Health Insurance PTO PM15 Site Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We celebrate diversity and do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Creating Passion: Your Responsibilities Responsibilities Surface Preparation Perform pre-cleaning, degreasing, and removal of contaminants such as oil, grease, dust, rust, and scale using manual or mechanical methods (e.g., shot blasting, wire brushing). Ensure surface profile meets paint manufacturer's requirements (anchor pattern, cleanliness). Primer & Intermediate Coat Application Apply primer coat uniformly ensuring no under-coating or over-spray. Apply intermediate coats as specified in the paint system (e.g., epoxy, zincrich, polyamide-based primers). Allow proper flash-off and curing time between coats. Top Coat Application Apply final topcoat (e.g., polyurethane, alkyd, or epoxy finish) with correct technique (HVLP, Airless spray) ensuring even finish, correct gloss, and required shade. Paint Mixing and Material Handling Mix paints and hardeners in correct ratios as per technical data sheet (TDS). Label and use paint materials before expiry date; follow FIFO. Ensure correct storage of paints, thinners, and solvents as per MSDS. Quality Control Checks Measure WFT (Wet Film Thickness) during application. Measure DFT (Dry Film Thickness) using Elcometer after curing. Record batch numbers, WFT/DFT results, touch-up details in paint logbook or ERP. Perform visual inspection for defects such as pinholes, orange peel, drips, undercoating, or shade mismatch. Process Compliance Follow standard work instructions (WI), SOPs, and job cards for each order. Ensure compliance with ISO 12944, ISO 8501-1, and customer-specific corrosion protection standards. Apply correct masking, protection of machined/critical surfaces before painting. Touch-Up & Repairs Identify areas needing repair post-handling, welding, or transport. Rework based on inspection reports while ensuring blending with original coating. Equipment & Tool Handling Operate spray painting equipment (conventional, airless, or electrostatic). Clean and maintain spray guns, hoses, compressors, and filters. Calibrate DFT meters and mixing scales as per schedule Documentation & Traceability Maintain detailed paint records including batch numbers, paint codes, operator ID, area covered, and environmental conditions. Complete paint inspection reports, ERP entries, and rework records as required. Workplace & 5S Maintenance Maintain organized and safe workplace per 5S and TPM principles. Ensure disposal of waste materials (rags, paint tins, thinner) in line with environmental norms. Communication & Teamwork Communicate issues such as improper surface condition, missing job cards, equipment malfunction, or paint mismatch to supervisor. Collaborate with fabrication, quality, and logistics teams for paint priorities and sequencing. Contributing Your Strengths: Your Qualifications Qualification & Education Requirements: Minimum Qualification- ITI in Painter Trade or Diploma in Surface Coating Technology / Industrial Painting Additional Training- In-plant training or certification in spray painting methods preferred Certifications (Preferred)- NACE Level 1 / FROSIO Level 1 / Equivalent corrosion protection certifications (desirable) Reading & Comprehension- Ability to understand and follow work instructions, safety signs, and paint specifications in English/Hindi/local language Experience: Industry Background- 2–5 years in industrial painting in heavy machinery, automotive, structural steel, or similar sectors Application Process- Hands-on experience in airless or HVLP spray painting, shot blasting, masking, and DFT checks Coating System Exposure- Familiarity with epoxy, PU, alkyd, zinc-rich, and water-based paint systems Quality Involvement- Experience with in-process paint quality inspection and documentation desirable Special Skills / Competencies Knowledge of corrosion protection systems (e.g., ISO 12944-5 classification C3/C4/C5). Accurate paint mixing, thinning, and application technique. Understanding of paint curing times and environmental parameters (temperature, humidity). Proficiency in using DFT meters, Elcometer, gloss meters, and standoff gauges. Knowledge of masking techniques for machined and threaded surfaces. Ability to work in standing, crouching, and overhead positions for long durations. Awareness of explosion-proof tools, ATEX zone rules (for enclosed paint areas). Basic computer skills (for logging job cards or ERP entries) Health, Safety & Environmental (HSE) Compliance Personal Protective Equipment- Must wear respirator masks, gloves, face shields, safety shoes, coveralls, and hearing protection. Safe Work Practices- No open flames or smoking in painting or solvent storage area. Follow lockout/tagout during equipment maintenance. MSDS Compliance- Handle paints, thinners, and chemicals as per MSDS guidelines. Ventilation Standards- Work only in ventilated spray booths with exhaust systems functioning. Waste Disposal- Dispose used solvents, empty containers, and paint sludge in designated bins only Fire Safety Awareness- Must know location and use of fire extinguishers and spill kits in the paint shop. Medical Fitness- Fit to work with respiratory protection and physically demanding tasks Have we awoken your interest? Then we look forward to receiving your online application. If you have any questions, please contact Sonali Samal. One Passion. Many Opportunities. The Company Liebherr CMCtec India Private Limited in Pune (India) was established in 2008 and started its manufacturing plant in its own facility on Pune Solapur Highway in 2012. The company is responsible for the production of tower cranes and drives. Location Liebherr CMCtec India Private Limited Gat No. 196-199, Dhaygudewadi Nh-9 Pune India (IN) Contact Sonali Samal sonali.samal@liebherr.com shweta.Chakrawarti@liebherr.com

Company Description Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. In 2024, Sika’s around 33,000 employees generated annual sales of CHF 11.76 billion. Job Description Title : R&D Technician - cementitious mortar - 3rd Party Payroll Department: Technology Location : Nerul, Navi Mumbai R&D Reports To : Executive/Manager- cementitious R&D Company Profile Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 102 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. In 2024, Sika’s more than 34,000 employees generated annual sales of CHF 11.76 billion. Overview The Lab Technician has the technical responsibility to support his supervisor on Trial Modification of Mortar, Grouts, Tile adhesive etc Duties And Responsibilities Support the trial mix for research and development purposes, which is not limited to weighing, flow/ slump testing, cleaning of mixing tools, water permeability test, rheology, RCPT, wash out, etc. Supporting the application technician for physical parameter testing of competitor sample, raw material, etc. Conducting field test at the site as per the instruction from the supervisor. Testing of sands, cement, chemical materials and finished goods i.e. sieving, flow, strength, Carry out and compile laboratory test results such as sieve analysis, water absorption, moisture content, specific gravity, etc, marsh cone & other test. Maintenance of samples, testing apparatus, tools preparation for corrosion testing, testing as ASTM G 109. Supporting the supervisor for collecting the data with regards to shrinkage & tam study of the admixture. Stability sample preparation & support the supervisor for observation of the sample. Cube de-molding, cube cleaning & cube testing in CTM. Updating of the strength in the trail sheet. Monitors the overall raw material stock availability for conducting lab trails and ensure appropriate use of them. Pick up of the raw material from production site. Housekeeping of Acid, Alkali cabinet, RM storage, application and lab areas. Sample preparation & raw material arrangement for trials. Storage of cements, sand and materials. Monitors availability and implementation of PPEs and relevant essential tools. Continuous support to training calendar. Supporting the supervisor for calibration of the equipment. Unloading of raw material received from the site. 5 s of the raw material storage area. Supporting the supervisor which is not limited to removing of the sludge from ETP sludge bed, drying the material, filling of the same in bin & labelling. Segregation of hazardous & non-hazardous material. Operating of ETP & updating the same in the record book. Housekeeping of the outdoor premises & main lab area which is not limited to arranging the aggregates, cementitious as per the customer identification, removal of unwanted material, cleaning of the area, etc. Housekeeping of the sample preparation area which is not limited to identification, cleaning, segregating of raw material, etc. Housekeeping of the other lab area. Provides overall assistance to development team in various technical activities. Performs other duties as assigned by the supervisor for smooth functioning of the R&D premises. Performs other duties as assigned by the supervisor such as MSEB, MTNL, TTC, etc. work for smooth functioning of the R&D premises. Maintenance of safety shower, eye wash & water level check of the fire hydrant tank. Maintenance of concrete mixer & as a back-up for the siren testing & DG operation. Back-up for night shift & testing of cube as & when required. Maintenance of electrical, mechanical & other equipment, which is not limited to DG operation, UPS, Siren, AC’s, lights, etc. present in the R&D premises. Supporting the third-party vendor for maintenance of the major equipment such as DG, UPS, Electrical Equipment’s, Fire Hydrant, Fire Panel, Fire Fighting Equipment’s, Panel area, etc. for smooth functioning of R&D premises. Supporting the third-party environmental testing. Pick up of the raw material from the gate. Qualifications/Experience Graduate Minimum 2 years of experience in product development in Chemical Manufacturing Company Knowledge on construction chemicals, application, R&D, QC is preferred. Helpful if having Knowledge on Cement, concrete Admixture and Related Raw material functions. Analytical equipment handling Basic computer knowledge. Competencies Passion for innovation Behavioura l Self-starter Work management

Job Requirements Roles & Responsibilities : This position is a mechanical integrity technical position for fixed equipment in support of petrochemical facility This position provides technical support to the client with a focus on managing the risk based inspection program, troubleshooting, asset improvement, and technology selection Provide strong technical leadership in Inspection/Corrosion Management for Oil & Gas upstream/downstream assets Provide technical solution in upstream/downstream Asset Integrity Has ability to create innovative solutions /automations/ methodologies to build a differentiation for Quest Global Integrity assessment/assurance activities like FFS, Corrosion Evaluations and Remaining Life Studies Drive and manage Integrity Engineers to execute the workflows with Quality at scale Provide pre-sales support for new business deals and post-sales support for the new projects assigned Drive core team members to recruit skilled resources or train internal resources to achieve the targets Act as a bridge between customer, sales organization and global technical teams Lead Develop, nurture and manage global customer relationships and drive strategic partnering initiatives to address unique business situations and complex technology needs Review technical scoping, estimation, fitment and feasibility studies, mapping customer expectations and solution design, prepared by Program Managers and Project Leader Degradation evaluations related to pressure equipment, heat exchangers, piping circuits, fired equipment, flares, above ground storage tanks, and/or pressure relief devices. Monitoring and surveillance of integrity parameters to ensure reliable operations. Troubleshooting, root cause analysis, and integrity recommendation stewardship. Bad actor identification and analysis to reduce equipment downtime. Data analytics, digital tools/ technologies and operationalize upgraded work practices through digital transformation. Overall integrity effectiveness and management which includes, criticality assessments, consequence/ complexity rating of fixed equipment, development of fit-for-purpose risk based strategies, setting optimum task intervals including considerations to local regulations/ statutory requirements, timely review of inspection findings, and ever-greening of strategies. Regional oversight and stewardship of integrity work product metrics for quality, effectiveness, and efficiency in achieving business unit/ manufacturing site objectives. Coordination and communication between various global centers and business affiliates for various aspects like, knowledge transfer, sharing learnings, skill management and maintaining business relationships. Technical mentoring and continuous on-the-job guidance to new members in the team. Ability to learn and adapt to an agile and flexible working environment, continuously stay abreast of latest developments in industry standards/ practices, bring in leanings/ experience to challenge and improvise company work processes/ practices. Analysis of inspection results and recommended future actions Perform mechanical analysis of required thickness and fitness for service assessments Work Experience Required Qualifications & Competencies: Engineering degree (Mechanical/Materials or Chemical) 3 to 15+ years of oil gas experience in related industry (refining/petrochemical/LNG/oil & gas) Should have sound knowledge on Oil & Gas upstream and downstream business in the following areas Risk Based Inspection methodologies Fixed equipment inspection tasks/ procedures Inspection Optimization Piping Circutization/TML development API Damage Mechanisms of Refinery/Chemicals In-service inspection of all types of fixed equipment Knowledge of materials and standards Knowledge of corrosion & welding Knowledge of NDTs Thickness inspection management and analysis Corrosion management and analysis Inspection plan development/ optimization. Knowledge of software (APM Meridium/Pestra/Credo, etc.) Ability to lead teams Excellent communication Should have working knowledge of oil and gas plant operations Should have exposure to Operating condition Safety, SHE risks, spill/ safety incident and equipment failure opportunities Should have Knowledge of various roles and responsibilities of engineers working in the oil and gas field/site Should have knowledge of corrective and preventative maintenance strategy Should have knowledge of International standards in design, quality, and procedures for approved equipment Working knowledge in key sections of ASME Sec Div. 1/2, ASME Sec V, ASME Sec IX, ASME Sec Il, ASME B31.3/ B31.1/ B31.4/ B31.8, ASME PCC-2 Field in-service inspection and repair of pressure equipment, heat exchangers, piping systems, pressure relief devices and above ground storage tanks in operating unit Experience with Office applications (Word, Excel, and Power Point) Strong verbal/ written communication skills in English Good interpersonal skills, adaptability and working collaboratively with the other teams Willing to work in shift timings with flexibility to meet business needs Flexible to work in different locations depending on business requirement Flexibility to travel internationally as per business needs Good to have skills: Certification and in-depth working knowledge in API 580, API 510, API 570, API 571 , API 653, NACE Senior Corrosion Technologist, BSI ISO/ ENI AS Standards, AWS/ CSWIP/ ASNT NDT Techniques Experience with Meridium/Credo/Pestra and SAP Implementation of Automation, AI, IOT techniques in Oil & Gas Portfolio

Job Requirements This position is a mechanical integrity technical position for fixed equipment in support of petrochemical facility This position provides technical support to the client with a focus on managing the risk based inspection program, troubleshooting, asset improvement, and technology selection Provide strong technical leadership in Inspection/Corrosion Management for Oil & Gas upstream/downstream assets Provide technical solution in upstream/downstream Asset Integrity Has ability to create innovative solutions /automations/ methodologies to build a differentiation for Quest Global Integrity assessment/assurance activities like FFS, Corrosion Evaluations and Remaining Life Studies Drive and manage Integrity Engineers to execute the workflows with Quality at scale Provide pre-sales support for new business deals and post-sales support for the new projects assigned Drive core team members to recruit skilled resources or train internal resources to achieve the targets Act as a bridge between customer, sales organization and global technical teams Lead Develop, nurture and manage global customer relationships and drive strategic partnering initiatives to address unique business situations and complex technology needs Review technical scoping, estimation, fitment and feasibility studies, mapping customer expectations and solution design, prepared by Program Managers and Project Leader Degradation evaluations related to pressure equipment, heat exchangers, piping circuits, fired equipment, flares, above ground storage tanks, and/or pressure relief devices. Monitoring and surveillance of integrity parameters to ensure reliable operations. Troubleshooting, root cause analysis, and integrity recommendation stewardship. Bad actor identification and analysis to reduce equipment downtime. Data analytics, digital tools/ technologies and operationalize upgraded work practices through digital transformation. Overall integrity effectiveness and management which includes, criticality assessments, consequence/ complexity rating of fixed equipment, development of fit-for-purpose risk based strategies, setting optimum task intervals including considerations to local regulations/ statutory requirements, timely review of inspection findings, and ever-greening of strategies. Regional oversight and stewardship of integrity work product metrics for quality, effectiveness, and efficiency in achieving business unit/ manufacturing site objectives. Coordination and communication between various global centers and business affiliates for various aspects like, knowledge transfer, sharing learnings, skill management and maintaining business relationships. Technical mentoring and continuous on-the-job guidance to new members in the team. Ability to learn and adapt to an agile and flexible working environment, continuously stay abreast of latest developments in industry standards/ practices, bring in leanings/ experience to challenge and improvise company work processes/ practices. Analysis of inspection results and recommended future actions Perform mechanical analysis of required thickness and fitness for service assessments Work Experience Engineering degree (Mechanical/Materials or Chemical) 3 to 15+ years of oil gas experience in related industry (refining/petrochemical/LNG/oil & gas) Should have sound knowledge on Oil & Gas upstream and downstream business in the following areas Risk Based Inspection methodologies Fixed equipment inspection tasks/ procedures Inspection Optimization Piping Circutization/TML development API Damage Mechanisms of Refinery/Chemicals In-service inspection of all types of fixed equipment Knowledge of materials and standards Knowledge of corrosion & welding Knowledge of NDTs Thickness inspection management and analysis Corrosion management and analysis Inspection plan development/ optimization. Knowledge of software (APM Meridium/Pestra/Credo, etc.) Ability to lead teams Excellent communication Should have working knowledge of oil and gas plant operations Should have exposure to Operating condition Safety, SHE risks, spill/ safety incident and equipment failure opportunities Should have Knowledge of various roles and responsibilities of engineers working in the oil and gas field/site Should have knowledge of corrective and preventative maintenance strategy Should have knowledge of International standards in design, quality, and procedures for approved equipment Working knowledge in key sections of ASME Sec Div. 1/2, ASME Sec V, ASME Sec IX, ASME Sec Il, ASME B31.3/ B31.1/ B31.4/ B31.8, ASME PCC-2 Field in-service inspection and repair of pressure equipment, heat exchangers, piping systems, pressure relief devices and above ground storage tanks in operating unit Experience with Office applications (Word, Excel, and Power Point) Strong verbal/ written communication skills in English Good interpersonal skills, adaptability and working collaboratively with the other teams Willing to work in shift timings with flexibility to meet business needs Flexible to work in different locations depending on business requirement Flexibility to travel internationally as per business needs Good to have skills: Certification and in-depth working knowledge in API 580, API 510, API 570, API 571 , API 653, NACE Senior Corrosion Technologist, BSI ISO/ ENI AS Standards, AWS/ CSWIP/ ASNT NDT Techniques Experience with Meridium/Credo/Pestra and SAP Implementation of Automation, AI, IOT techniques in Oil & Gas Portfolio

About us At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world’s largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet society’s evolving needs. Learn more about our What and our Why and how we can work together . ExxonMobil’s affiliates in India ExxonMobil’s affiliates have offices in India in Bengaluru, Mumbai and the National Capital Region. ExxonMobil’s affiliates in India supporting the Product Solutions business engage in the marketing, sales and distribution of performance as well as specialty products across chemicals and lubricants businesses. The India planning teams are also embedded with global business units for business planning and analytics. ExxonMobil’s LNG affiliate in India supporting the upstream business provides consultant services for other ExxonMobil upstream affiliates and conducts LNG market-development activities. The Global Business Center - Technology Center provides a range of technical and business support services for ExxonMobil’s operations around the globe. ExxonMobil strives to make a positive contribution to the communities where we operate and its affiliates support a range of education, health and community-building programs in India. Read more about our Corporate Responsibility Framework. To know more about ExxonMobil in India, visit ExxonMobil India and the Energy Factor India. What role you will play in our team If you like working in a team where people take care of each other, where people are honest with each other, where we give honest feedback and like to receive honest feedback. We may have a great job for you! ExxonMobil is seeking qualified and experienced individuals to support Project’s Brown Field Organization (BPO) as Materials Support Specialist’s focus provide Materials Engineering technical support and expertise to its capital projects. The candidate would be part of Brownfield Projects team in ExxonMobil Global Projects Organization, working out of ExxonMobil's Bengaluru Campus (Prestige Shantiniketan) in India. The candidate would be responsible for working with multi-discipline teams to execute/establish/improve materials engineering related work processes/solutions/ recommendations. The Brownfield Project Organization (BPO) Materials Support Specialist’s main function is to act as ExxonMobil’s lead to oversee the work of the DTI contractor’s engineering team for materials discipline and project portfolio. The primary objective of this role is to increase the overall performance in quality, cost and schedule of the engineering work performed by the DTI engineering contractors. The role will require both engineering management and technical skills. Leadership is an essential skill as the BPO Materials Support Specialist will need to develop and maintain a strong relationship and rapport with their contractor discipline counterparts in order to influence how they function and drive improvements. The relationship between the BPO Materials Support Specialist and their respective site(s) is equally as critical to ensure alignment on the scope, design basis, etc. In addition to leadership skills, a strong technical aptitude is needed to ensure the quality, completeness and accuracy, and timeliness of the contractors’ work meets the project’s objectives, and it enables the BPO Materials Support Specialist to apply sound technical decision making on behalf of the asset(s) they represent. What you will do Support development of Stage 2 and Stage 3 project team deliverables including right scope definition, technical design basis preparation, engineering criticality assessments, engineering surveillance plans, etc., Review Engineering and Procurement proposals from contractors to support award recommendations. This includes assessing the engineering scope, schedule, manpower, deliverable list as well as the contractor’s understanding of the scope for materials discipline. Provide recommendations to the Project Manager to ensure and sounds proposal basis. Assess and monitor competency and performance of contractor’s discipline engineers assigned to their respective portfolio and make recommendation to the Portfolio Engineering Lead or Portfolio Engineering Manager. Provide oversight and quality control on contractor deliverables. Review and comment on contractor’s work in line with key issues alignment list, engineering criticality and surveillance plans. Ensure work meets project technical and operational requirements. Perform follow up with contractor on key design issues identified during deliverables review. Participate in project design reviews (e.g. HAZOP, etc.,) Identify and elevate systemic challenges for respective discipline in quality or schedule adherence to Portfolio Engineering Lead and Project Manager. Provide recommendations to enable effective resolution. Proactively identify and work discipline specific issues for respective contractor. Support procurement, fabrication, construction, commissioning and startup activities as required, This may require shop/site visits. Participate in assessments/audits of contractors’ processes and systems. Assists in the review of contractors' work processes, procedures (including those for model reviews) and planned deliverables for FEED, detailed engineering and procurement that are used to effectively manage and control design engineering activities. Ensure Contractor’s typical deliverables are fit-for-purpose and cost effective. Recommends corrective action where deficiencies in performance are detected and verifies that actions are taken. Coordinates with Global SMEs to ensure compliance with OIMS, safety, environmental protection, asset protection, reliability, operability, and maintainability are engineered into the facility. Provides input to the project managers on key strategies and decisions and works with project teams to ensure timely resolution of technical & engineering interface challenges, directing engineering studies. Seek Site Engineering Specialist input on key issues and keep them informed/aligned on key technical decisions & deliverables. What you will do-Cont.. Raise issues that are not resolved by Contractor to the Project Engineer & Engineering Specialist Coordinator as needed. Perform materials selection for Greenfield and Brownfield projects across the Upstream, Low Carbon Solutions, and Petrochemical value chains by leveraging company and industry standards, codes, and global practices. Develop materials specifications for procurement of new equipment for a project or planned replacement. Act as a Materials Project Engineering Specialist to review equipment and piping design specifications and other related materials integrity documents developed by EPCs. Review materials test reports and mill certificates to confirm conformance with materials specification requirements. Perform corrosion calculations using EM Proprietary and 3rd Party vendor corrosion prediction models to support material selection decisions. Review Materials Selection Philosophy, Manufacturer's MPS/ITP and other Materials Engineering related documents. Provide resolution to materials deviation requests from EPC's and Operating organizations on timely and clear communication with project teams with consideration to performance/integrity, CAPEX, schedule and OPEX factors. Perform life cycle cost calculations to validate material selection decisions incl. options for corrosion and low alloy steels with corrosion management. Participate in reviewing and upgrading company and/or industry guidelines and practices. Provide technical mentoring and continuous on-the-job guidance to early career engineers in the team. Coordinate and communicate between various global centers and business affiliates for knowledge transfer, sharing learnings, skill management and maintaining business relationships. Perform failure analysis for metallic material involving various degradation mechanism and provide or recommend corrective/preventive actions. About You Skills and Qualifications. Bachelor’s or master’s degree from a recognized university in Metallurgy/ Materials Engineering or related disciplines from a recognized university. Minimum 10 years of experience in Materials Engineering in the oil & gas industry including project support. Demonstrated work experience and knowledge in materials selection, corrosion assessment/control, welding/fabrication, and inspection/testing in support of facilities design. Preferred Qualifications/Experiences Demonstrated ability to handle multiple priorities and stakeholders. Strong verbal/written communication skills in English, adaptability/interpersonal skills. Work shift is normally in the afternoon shift (01:30 pm to 10:30 pm) with flexibility to meet business needs. Flexibility to travel internationally as per business needs. Should not have attended an interview for Materials Engineer position in the last 1 year Your benefits An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance and life. We offer you: Competitive compensation Medical plans, maternity leave and benefits, life, accidental death and dismemberment benefits Retirement benefits Global networking & cross-functional opportunities Annual vacations & holidays Day care assistance program Training and development program Tuition assistance program Workplace flexibility policy Relocation program Transportation facility Please note benefits may change from time to time without notice, subject to applicable laws. The benefits programs are based on the Company’s eligibility guidelines. Stay connected with us Learn more about ExxonMobil in India, visit ExxonMobil India and Energy Factor India. Follow us on LinkedIn and Instagram Like us on Facebook Subscribe our channel at YouTube EEO Statement ExxonMobil is an Equal Opportunity Employer: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin or disability status. Business solicitation and recruiting scams ExxonMobil does not use recruiting or placement agencies that charge candidates an advance fee of any kind (e.g., placement fees, immigration processing fees, etc.). Follow the LINK to understand more about recruitment scams in the name of ExxonMobil. Nothing herein is intended to override the corporate separateness of local entities. Working relationships discussed herein do not necessarily represent a reporting connection, but may reflect a functional guidance, stewardship, or service relationship. Exxon Mobil Corporation has numerous affiliates, many with names that include ExxonMobil, Exxon, Esso and Mobil. For convenience and simplicity, those terms and terms like corporation, company, our, we and its are sometimes used as abbreviated references to specific affiliates or affiliate groups. Abbreviated references describing global or regional operational organizations and global or regional business lines are also sometimes used for convenience and simplicity. Similarly, ExxonMobil has business relationships with thousands of customers, suppliers, governments, and others. For convenience and simplicity, words like venture, joint venture, partnership, co-venturer, and partner are used to indicate business relationships involving common activities and interests, and those words may not indicate precise legal relationships.

Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colorful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles. We are looking for a motivated and experienced Technical Service Specialist to join our team in Bangalore. This individual will play a key role in managing technical service requirements, maintaining customer relationships, and driving business development in the two-wheeler automotive coatings industry. Key Responsibilities: Manage the technical service needs of assigned customers. Build and maintain strong relationships across all customer functions. Achieve assigned sales and collection targets. Increase the share of business at assigned customer accounts. Forecast and plan for service support and product supply. Drive overall business development within the designated area. Lead efforts in identifying and developing new business opportunities. Provide weekly and monthly reports on customer developments. Address issues by coordinating with cross-functional teams and ensuring timely resolutions. Role Scope & Purpose: Understand Axalta systems and processes. Coordinate with various internal departments. Establish and develop relationships with dealers. Work closely with Product Managers and the Marketing team. Travel Requirements: Up to 60% travel within the assigned region based on customer needs. Position Type: Individual Contributor (IC) Must-Have Requirements: 6-8 years of experience in the OEM Tier 1 / Two-wheeler technical service industry. Strong understanding of automotive paint basics and defect troubleshooting. Willingness to travel extensively. Accountability and strong stakeholder management skills. Knowledge of robot paint application is an added advantage. Nice-to-Have: B.E. degree preferred. Immediate joiners are preferred. Education: Diploma + B.E. Graduate Tools & Technology: Proficient in MS Office and Excel Value Proposition: Excellent work-life balance compared to peer companies. Future opportunity to lead a team. Work Environment: Collaborative and fast-paced work culture. Requires strong interpersonal skills and adaptability. This role is an exciting opportunity for a technically strong and relationship-driven professional looking to make an impact in a dynamic business segment. Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals. Our Company: Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colorful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles. Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals.

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Multidisciplinary Inspection Evaluation: Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery). Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools. Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults. Code Standard Compliance: Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes). Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans. Documentation Reporting: Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations. Maintain comprehensive records of all inspection activities, test results, and corrective actions taken. Develop and update inspection checklists, procedures, and methodologies. Problem Identification Resolution: Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues. Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions. Provide technical advice and guidance on repair methodologies, material selection, and quality improvements. Collaboration Communication: Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies). Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences. Participate in pre-inspection meetings, progress reviews, and final acceptance procedures. Safety Quality Assurance: Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities. Contribute to the continuous improvement of quality management systems and inspection processes. This job is provided by Shine.com

Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colorful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles. We are looking for a motivated and experienced Technical Service Specialist to join our team in Bangalore. This individual will play a key role in managing technical service requirements, maintaining customer relationships, and driving business development in the two-wheeler automotive coatings industry. Key Responsibilities: Manage the technical service needs of assigned customers. Build and maintain strong relationships across all customer functions. Achieve assigned sales and collection targets. Increase the share of business at assigned customer accounts. Forecast and plan for service support and product supply. Drive overall business development within the designated area. Lead efforts in identifying and developing new business opportunities. Provide weekly and monthly reports on customer developments. Address issues by coordinating with cross-functional teams and ensuring timely resolutions. Role Scope & Purpose: Understand Axalta systems and processes. Coordinate with various internal departments. Establish and develop relationships with dealers. Work closely with Product Managers and the Marketing team. Travel Requirements: Up to 60% travel within the assigned region based on customer needs. Position Type: Individual Contributor (IC) Must-Have Requirements: 6-8 years of experience in the OEM Tier 1 / Two-wheeler technical service industry. Strong understanding of automotive paint basics and defect troubleshooting. Willingness to travel extensively. Accountability and strong stakeholder management skills. Knowledge of robot paint application is an added advantage. Nice-to-Have: B.E. degree preferred. Immediate joiners are preferred. Education: Diploma + B.E. Graduate Tools & Technology: Proficient in MS Office and Excel Value Proposition: Excellent work-life balance compared to peer companies. Future opportunity to lead a team. Work Environment: Collaborative and fast-paced work culture. Requires strong interpersonal skills and adaptability. This role is an exciting opportunity for a technically strong and relationship-driven professional looking to make an impact in a dynamic business segment. Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals. Our Company: Axalta has remained at the forefront of the coatings industry by continually investing in innovative solutions. We engineer technologies that protect customers’ products – whether they are battling heat, light, corrosion, abrasion, moisture, or chemicals – and add dimension and beauty with colorful finishes. We have a vast and ever-evolving portfolio of brands primed to play an important part in everything from modernizing infrastructure around the world to enabling the next generation of electric and autonomous vehicles. Axalta operates its business in two segments: Performance Coatings and Mobility Coatings, which serve four end markets, including Refinish, Industrial, Light Vehicle and Commercial Vehicle, across North America, EMEA, Latin America and Asia-Pacific. Our diverse global footprint allows us to deliver solutions in over 140+ countries and coat 30 million vehicles per year. We’ve recently set an exciting 2040 carbon neutrality goal, in addition to 10 other sustainability initiatives, and we take pride in working with our customers to optimize their businesses and achieve their goals.

Design and develop surface coating solutions (e.g., paint, powder coating, PVD, anodizing, etc.) for metal, plastic, or composite components. Evaluate and select suitable coating materials and processes based on application, environment, and regulatory requirements. Create detailed 2D/3D CAD drawings and specifications incorporating surface treatment requirements. Collaborate with product design teams to ensure coatings are integrated effectively into overall designs. Define process parameters and work with manufacturing to implement and optimize coating applications. Develop and execute test plans to validate coating performance (adhesion, corrosion resistance, abrasion resistance, etc.). Interface with suppliers and internal stakeholders for coating application development and troubleshooting. Monitor industry trends and new technologies in surface engineering and recommend improvements. Ensure compliance with environmental, safety, and quality standards. Job Type: Full-time Pay: ₹15,000.00 - ₹60,000.00 per month Schedule: Day shift Supplemental Pay: Overtime pay Work Location: In person

Service and solutions provider for water treatment chemicals used in Chillers, Boilers and cooling towers for our various clients. This dynamic position requires you to travel independently(By bike) daily, to perform on-site analysis. If interested please contact 6369804009 As a Cooling Tower and boiler Water treatment testing Technician, you will play a crucial role in safeguarding our clients' water systems and promoting optimum performance. You will be our eyes and ears on the ground, ensuring accurate data collection and contributing to effective water treatment recommendations. Experience: Experienced Location: Ennore, Chennai Salary: As per industrial norms Job Responsibilities: Travel independently : Navigate to assigned client locations by bike daily, efficiently managing your time and route. Sample collection : Safely and accurately collect cooling tower water samples following established protocols. Field testing : Utilize portable testing equipment to measure key water parameters like pH, conductivity, chlorine, and corrosion potential. Data recording : Document measurements and observations meticulously in designated forms and software. Basic maintenance : Perform minor equipment checks and calibrations as needed. Communication : Maintain clear communication with clients regarding sampling procedures and findings. Reporting : Generate accurate and timely reports for internal analysis and client communication. Qualifications: Knowledge and understanding of cooling tower, chiller, and boiler systems, as well as the associated chemical treatment requirements is advantageous. Strong technical aptitude and the ability to effectively communicate complex concepts to customers. Self-motivated with a results-oriented mindset. Ability to work independently and as part of a team. Willingness to travel within the assigned territory, as required. Candidates currently working as delivery partners and who have a keen interest in the field of chemistry and chemical testing can also apply. Job Types: Full-time, Permanent Pay: From ₹15,000.00 per month Benefits: Health insurance Provident Fund Application Question(s): Do you have a bike to commute?? Experience: total work: 1 year (Preferred) Work Location: In person

Title: Metallurgist Roles & Responsibilities Under broad direction, functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far reaching impact on extensive engineering and related activities of the company. Excellent spoken and written communication skills in English Manages critical issues with top-level engineers and officers of other organizations and companies. Performs advisory and consulting work for the organization as a recognized authority for broad program areas or in an intensely specialized area. Job role contributes directly to value creation. Willing to travel globally and undertake short term assignment with other KBR offices and project site as needed to support projects. Desired Skill sets Material Selection, Corrosion Control Demonstrated knowledge in materials, corrosion, coatings, insulation, and cathodic protection domains in Oil & Gas, Refinery, Petrochemical and Fertilizer Projects Hands-on knowledge in material selection & Corrosion deliverables, Preparation of Corrosion Control, Monitoring, Coating, Insulation & PFP Material specs. Should be able to develop Material Selection Philosophy & Reports and also Carrying out Erosion & Corrosion Calculations Knowledge of using industry approved softwares such as ECE, PREDICT, DNV & SPPS to estimate Corrosion/erosion rate is highly desired. Liaise with Engineering, Construction & Vendors on Metallurgical/Corrosion/Testing issues Cathodic Protection Design Engineering Prepare Cathodic Protection System related Engineering deliverables, Site / Construction Coordination. Reviewing and approving various Procedures including Preparation of As-Built Drawing and final documentation. Perform Design and Detail Engineering of CP System for Pipelines, Internal & External of Tanks/vessels & Bullets, Plant Piping and Equipment. CP design for offshore structures and subsea pipelines Corrosion Integrity, Inspection Planning Knowledge in Evaluating Chemical Treatment (Corrosion Inhibition, Oxygen Scavengers, Biocide etc.) for corrosion control. Undertaking Material Corrosion Audit (MCA) that includes Corrosion Control and Corrosion Monitoring is desirable Corrosion Risk Assessment Study (CRAS) based on API 580/581 qualitative / semi-quantitative / quantitative approaches. Developing Corrosion Management Plans (CMP), Corrosion Loop Diagrams (CLD), Damage mechanisms narratives, Risk drawings. Liaison with third-party vendors for carrying out Risk Based Inspection (RBI) Study is desirable

Company Description Vibrant NDT Services Pvt Ltd is a leader in Non-Destructive Testing (NDT) with ISO 9001:2008 & ISO EIC 17025 certification. Located in Ambattur, Chennai, the company specializes in the research, development, and manufacturing of advanced NDT equipment. Vibrant NDT provides a broad range of inspection solutions, including NDT and Partial Destructive Testing, equipment supply, calibration, and training for ASNT Level-II and welder qualifications. The company is renowned for its high-tech facilities, well-equipped laboratory, and sophisticated training institute. Role Description This is a full-time on-site role for an NDT Technician located in Chennai. The NDT Technician will be responsible for performing various non-destructive testing methods, including eddy current testing, corrosion analysis, ultrasonics, and inspection. The technician will participate in quality control processes and ensure compliance with industry standards. Daily tasks will include setting up and calibrating NDT equipment, conducting tests, interpreting results, and maintaining detailed inspection reports. Qualifications Proficiency in Eddy Current testing and Ultrasonics Experience in Quality Control and Corrosion analysis Inspection skills and the ability to interpret test results accurately Excellent written and verbal communication skills Attention to detail and strong analytical skills Ability to work independently and as part of a team ASNT Level-II certification and/or relevant NDT certifications are a plus Professional training in NDT and related disciplines