18 Construction Support Jobs

As a Senior Technical Professional specializing in Instrumentation/Controls, you will be responsible for executing various project technical tasks assigned by the Instrumentation Discipline Lead. Your primary duties will include design, checking, layout definition, installation drawings, material definition, validation, testing, and engineering of process measuring sensors, process actuators, installation elements, and process safety elements. Additionally, you will interface and coordinate with other Project Team Specialists and Designers, ensuring the smooth progress of technical activities. With 8-12 years of experience in the field, you will be expected to ensure compliance with QA/QC and HSE requirements in all activities within your area of responsibility. Your tasks will involve a range of activities from Development Technology know-how and Commercial support to Construction and Start-up support. During the Feasibility and Bidding phase, you will prepare Instrumentation elements, quantities, and cost estimates to support the development of commercial proposals. You will review client technical documentation, coordinate subcontracted engineering activities, and define engineering design basis and guidelines during the Project Execution phase. Your role will also involve preparing technical documentation for Instrumentation elements material and services requisitions, providing technical support to the Project Team, and optimizing Instrumentation design to ensure minimal cost and complexity while complying with contractual and safety requirements. You will be responsible for preparing technical specifications, data sheets, installation specifications and drawings, BOQs, and MTOs, as well as participating in P and ID mechanization. During the Construction and Start-up phase, you will provide technical and engineering support to the construction team and perform site engineering activities. Your responsibilities will include coordinating engineering activities, ensuring Instrumentation 3D modeling design activities, participating in F.A.T. activities, and Vendor workshops. Overall, your role as a Senior Technical Professional - Instrumentation Engineer will play a crucial part in the successful execution of projects, contributing to the overall efficiency and effectiveness of the Instrumentation/Controls discipline.,

As a Principal Piping Engineer at Worley, you will play a crucial role in collaborating with the existing team to successfully deliver projects for clients while enhancing your skills and expertise. Your responsibilities include ensuring timely completion of design, requisitions, and engineering deliverables, maintaining discipline, operational efficiency, and adherence to working instructions and quality management system manual. You will oversee work progress, staff recruitment, development, and administration, as well as allocate proper personnel to projects and proposals. Your main duties also involve aligning with the Quality Policy, Core Values, and Objectives of the company by focusing on client satisfaction, project completion within budget, schedule, and quality, development and growth of team members, providing superior value to clients, and driving continual improvement in productivity and quality. Your involvement in technical issues will be crucial and will be measured against the Performance Advancement Plan. You will be responsible for managing the discipline by ensuring the structure, competence, and resources align with the company's requirements. It is essential to maintain a professional work environment that prioritizes safety, quality, and contractual obligations. Additionally, you will evaluate staff competence, recommend training, and oversee staff salary reviews and promotions within the discipline. Budget planning is a key aspect of your role, ensuring expenditure control within the allocated budget limits and preparing forward loading requirements. You will also be responsible for maintaining discipline documentation procedures, ensuring compliance with company procedures, and improving productivity by minimizing rework and errors. Furthermore, you will participate in proposals and business development activities, liaise with clients to meet their expectations, maintain technical participation standards, and handle special responsibilities such as investigating and implementing systems to enhance efficiency and accuracy. To qualify for this role, you should hold a degree in Chemical or Mechanical Engineering discipline with 15 to 22 years of experience in Piping Engineering and Construction support, preferably with a consultant, possessing overall knowledge in Piping Material & Stress. At Worley, we value a values-inspired culture that encourages belonging, connection, and innovation. We are committed to fostering a diverse, inclusive, and respectful workplace where everyone feels empowered and heard. Join us to explore diverse opportunities, broaden your horizons, and contribute to delivering sustainable change in today's low carbon energy infrastructure and technology landscape.,

As an Electrical Engineering Team Lead, you will be responsible for leading a team of engineers involved in the design and development of production facilities and process skids for greenfield and brownfield projects in the Oil & Gas industry. Operating in the upstream, midstream, and downstream sectors, you will interact effectively with direct reports, team members, clients, subcontractors, vendors, consultants, and stakeholders to ensure project success. Your key activities will include reviewing Invitation To Tender (ITT) documents, preparing technical queries for clients, carrying out FEED verification activities, issuing inquiry requisitions, reviewing offers from vendors, preparing scope split matrices, liaising with projects/planning, assigning manpower for engineering activities, recommending cost-effective measures, providing inputs for equipment layout, reviewing vendor drawings and documents, preparing Material Take Off (MTO), and providing technical support to construction sites and commissioning engineers. You will also monitor and assess engineering performance, participate in client meetings, coordinate with third-party engineering companies, undertake FATs and inspections, participate in design reviews, and travel as required to meet project and business needs. In terms of processes, you will validate man-hour estimations, evaluate sub-contractors/vendors, conduct project audits, ensure engineering execution is on time and budget, and review engineering deliverables. Key performance indicators will include comparing actual costs vs budget, on-time delivery of engineering deliverables, resource planning, NCRs, EDCN entries, MOCs, and service quality. Your role will involve interfaces with various stakeholders including Discipline Engineering Manager, Project Engineering/Managers, Tender Managers, Quality and HSE teams, Supply Chain team, Vendors, Discipline Engineers/Designers, and third-party engineering companies/organizations. The ideal candidate will have 10 to 15 years of industry experience with expertise in executing proposals, FEED, and detail engineering of oil & gas projects. You should possess knowledge of industry processes such as MEG, TEG, PWT, SWT, Desalters, Power units, Dehydrators, Gas and Solids treatments, Process Electric Heaters, and control panels. Proficiency in LV, MV, and HV systems, electrical system studies, lighting design, hazardous classification specifications, and layouts will be required. This position is based in Coimbatore, Tamil Nadu, and requires a Bachelor's Degree in Electrical Engineering. If you have a strong background in electrical engineering, project management, and a deep understanding of industry standards, this role offers an exciting opportunity to lead and contribute to challenging projects in the Oil & Gas sector.,

The Adani Group is a diversified organisation in India comprising 10 publicly traded companies with a world-class logistics and utility infrastructure portfolio across India. The group, headquartered in Ahmedabad, Gujarat, has positioned itself as a market leader in logistics and energy businesses with a focus on large-scale infrastructure development. Adani Group is known for its operations and maintenance practices benchmarked to global standards, making it the only Infrastructure Investment Grade issuer in India. Adani Airports Holding Limited, a part of Adani Group, is reshaping the aviation landscape in India by transforming airports into dynamic hubs of connectivity, innovation, and service excellence. The company prioritizes passenger experience, leverages state-of-the-art technology, and enhances operational efficiency to redefine airport infrastructure. Adani Airports aims to create world-class airports that serve as gateways to regional development and global connectivity, emphasizing sustainable growth and community impact. As a Senior Executive - Design, you will be responsible for executing key design tasks and managing team efforts to ensure the successful completion of design components. Your role will involve creating detailed architectural designs, conducting site analyses, and coordinating with stakeholders to align with project objectives and regulatory standards. By leveraging your technical skills, you will contribute to the effective and timely completion of design projects. Responsibilities: Execution of Architectural Designs: - Manage design tasks, create and update architectural drawings and models. - Implement revisions based on feedback, stakeholder inputs, and project scope changes. - Coordinate with team members for timely completion of design components and adherence to project deadlines. Site Inspection and Construction Support: - Conduct site inspections, surveys, and assessments to support design development. - Document findings for discussions with seniors and integrate site analysis into design plans. Stakeholder Management: - Act as a point of contact between the design team and project stakeholders. - Organize meetings to communicate design progress, gather feedback, and ensure alignment with project goals. Project Documentation and Compliance: - Prepare design reports, presentations, and project documentation for internal and external review. - Ensure all project documentation complies with standards, regulatory requirements, and organisational guidelines. Risk Assessment and Management: - Identify potential risks related to design and construction processes. - Support the development of risk mitigation strategies to address and manage identified risks effectively. Feasibility Study and Analysis: - Participate in feasibility studies to evaluate design proposals" viability. - Analyze study results and assist in refining design plans to ensure practicality, cost-effectiveness, and alignment with airport development goals. Key Stakeholders: Internal - Lead - Design, Senior Architects, Project Managers, Engineering and Maintenance Teams, Design and Drafting Teams. External - Urban Planning Authorities, Construction Contractors, Real Estate Developers, Environmental Regulatory Bodies, Local Community Representatives. Qualifications: - Bachelor's degree in Architecture, Urban Design, or a related field. - Minimum 5-8 years of experience in architectural design, preferably with exposure to city-side or large-scale development projects.,

The role of an Instrumentation Engineer involves performing various project technical tasks assigned by the Instrumentation Discipline Lead. These tasks include design, checking, layout definition, preparation of installation drawings and material definition, validation, testing, and engineering of process measuring sensors, process actuators, installation elements, and process safety elements. As a Senior Technical Professional, you will interface and coordinate with other Project Team Specialists and Designers to ensure the successful completion of the project. You will also be responsible for coordinating technical activities performed either insourcing or outsourcing, with a required experience level between 8-12 years. Your responsibilities will include executing activities within your area of responsibility while ensuring compliance with QA/QC and HSE requirements. This will involve tasks such as developing technology know-how and providing commercial support, feasibility analysis, and participating in the bidding phase and commercial proposal development. You will support the Discipline Lead in preparing instrumentation elements, quantities, man-hours, and cost estimates. During the project execution phase, you will review client technical documentation and requirements, coordinate subcontracted engineering activities, and define engineering design basis and guidelines. You will be responsible for preparing technical documentation for instrumentation elements, material, and services requisitions, as well as providing technical support to the Project Team. Additionally, you will optimize instrumentation design for cost-efficiency and minimal complexity while ensuring compliance with contractual and safety requirements. This will involve preparing instrumentation technical specifications, data sheets, installation specifications and drawings, BOQs, MTOs, and participating in P and ID mechanization. Furthermore, you will validate vendor control valves and safety valves sizing calculations, vendor measurements elements sizing calculations, and coordinate engineering activities. You will ensure instrumentation 3D modeling design activities and participate in Factory Acceptance Testing (F.A.T.) activities and Vendor workshops. During the construction and start-up phase, you will provide technical and engineering support to the construction team and perform site engineering activities to ensure successful construction and commissioning phases. Overall, as a Senior Technical Professional - Instrumentation/Controls, you will play a critical role in the successful execution of projects by leveraging your expertise and experience in instrumentation engineering. R2100702,

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving the quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. We are now recruiting talented individuals to fill our current vacancy for Senior Engineer (Process Mechanical) to work on our projects in Navi Mumbai/Bangalore/Hyderabad. As a Senior Engineer, you will be responsible for the preliminary and detail design of process mechanical systems associated with municipal and industrial water and/or wastewater treatment facilities and pump stations. You will work independently as well as with a team on various projects in line with client requirements. Additionally, you will lead and supervise the design team to ensure the project is delivered with high quality within the program and budget. Your role will also involve liaising with the lead region to demonstrate an understanding of scope, knowledge, and experience to provide innovative design solutions as per best engineering practices. Collaboration with other design disciplines will be essential to ensure the integrity of the overall design. Diligent focus on the quality of deliverables, managing project budget and schedule, building a profile in the industry, and keeping up-to-date with innovations and developments are key aspects of this role. Furthermore, coaching & mentoring of junior staff and compliance with Arcadis Health and Safety standards are vital responsibilities. Qualifications & Experience: - B.E / B. Tech in Mechanical, Civil, and Environmental Engineering from a recognized University. M.E/M. Tech desirable. - 5 to 10 years of experience in designing mechanical and process equipment for water supply & water treatment plants, sewerage & sewage treatment plants, and drainage systems. Required Competencies: - Proficiency in designing and analyzing hydraulic systems such as pump stations, including pumps, valves, and pipelines. - Knowledge of Auto CAD MEP, MEP Revit, Navisworks is a must. - Ability to prepare and check general specifications, mechanical specifications, contract documents, etc. - Hands-on experience with site supervision, construction support, and commissioning activities. - Experience in the review of P&ID drawings related to the water and wastewater treatment process. - Strong technical background and capability to design raw and potable water pumping stations, sewage pumping stations, particularly in association with pumps and associated piping, preparation of pump curve, selection of pumps, air blowers, chlorination equipment building services, etc. - Exposure to piping standards for ductile iron and/or steel large diameter pipes and drafting material specification is a must. - Knowledge of international codes, standards, and practices related to UK/Middle East/USA water industry is preferable. - Understanding of health and safety standards and environmental regulations. - Experience within a consultancy environment specifically in the water/wastewater industry will be preferred. - Strong verbal and written communication skills in the English language, with good report writing, analytical, and computer skills. Join Arcadis and be part of a team that believes in empowering individuals to be their best. We value everyone's contribution and are pioneering a skills-based approach where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. By joining us, you will be doing meaningful work that helps deliver sustainable solutions for a more prosperous planet. Make your mark on your career, your colleagues, your clients, your life, and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging. Create a Legacy. #Join Arcadis. #Hybrid,

As a Highway Design Engineer, you will be responsible for overseeing Highway Geometric Design and Pavement Design. Your primary duties will involve the geometric design of road alignment using Civil 3D / MX Roads software. Additionally, you will guide a team of PGET / GET on alignment design. The ideal candidate will be an enthusiastic Alignment Design Engineer with experience in multidisciplinary Road Projects, particularly in Detailed Design and Construction Support. You should possess a positive attitude and a willingness to both learn from and contribute to the team. In this role, you will also be required to coordinate with the site/construction team to ensure seamless project execution. To be successful in this position, you should have a minimum of 1-5 years of experience in Highway project design, specifically in 2/4/6 laning highway projects. A strong understanding of IRC codes and MoRTH specifications is essential. Ideally, you should hold a B.Tech in Civil Engineering, with an M.Tech being preferable. This is a full-time position that offers the opportunity to work on exciting highway projects and contribute to the growth of the team.,

You will be responsible for designing electrical distribution systems for buildings and facilities, including calculating electrical loads and selecting appropriate equipment such as switchgear, transformers, and panels. Your role will also involve designing lighting systems with the right illumination levels and energy efficiency, as well as developing layouts for power, lighting, emergency power, and special systems. Additionally, you will create single-line diagrams, panel schedules, and riser diagrams. In terms of technical documentation, you will prepare detailed electrical drawings and specifications, conduct load calculations, and voltage drop analyses. You will also be responsible for creating short circuit studies, coordination studies, and documenting emergency and standby power system requirements. Furthermore, you will prepare operation and maintenance manuals for electrical systems and generate as-built documentation reflecting final installation conditions. Ensuring code compliance and standards adherence will be a key aspect of your role. This includes making sure designs meet National Electrical Code (NEC) requirements, local building codes, and regulations. You will also apply industry standards such as IEEE, NFPA, NEMA, and UL, and design systems in accordance with energy codes like ASHRAE 90.1 and IECC. Implementing life safety requirements for emergency lighting and power, as well as addressing ADA requirements for electrical installations, will also be part of your responsibilities. Your role will involve coordinating electrical systems with architectural and structural elements, interfacing with mechanical engineers for HVAC power requirements, and collaborating with plumbing engineers on water heating and pump systems. Additionally, you will coordinate with fire protection systems for alarm and monitoring, integrate building automation systems with electrical controls, and resolve spatial conflicts through BIM coordination. Providing construction support will also be a key part of your responsibilities. This includes reviewing contractor submittals and shop drawings, conducting site visits to verify installation compliance with design, and responding to RFIs while providing technical clarifications. You will also perform inspections at critical installation milestones, witness testing and commissioning of electrical systems, and troubleshoot field issues during construction. Furthermore, you will be involved in designing specialized systems such as power conditioning and uninterruptible power supply (UPS) systems, lightning protection and grounding systems, telecommunications and data infrastructure designs, security systems including access control and CCTV, and distributed energy resources like solar PV and generators. Implementing smart building technologies and IoT infrastructure will also be part of your responsibilities. As part of project management, you will estimate project costs, develop electrical budgets, create work schedules, and track design progress. You will coordinate with clients to understand their electrical requirements, manage client expectations, and communicate technical information effectively. Collaborating with multidisciplinary teams to achieve project goals and ensuring quality control of electrical design deliverables will also be essential aspects of your role.,

As a Mechanical Manager at our Corporate Office in Vadodara, you will be responsible for overseeing projects within Chemical Processing Industries, utilizing your extensive 15+ years of experience in Project Mechanical. Your main responsibilities will include preparing budgets, finalizing project scopes, reviewing piping and structural drawings, and verifying contractor bills. You will also play a crucial role in the preparation and implementation of Project Execution Plans (PE) while working closely with upper management to ensure project schedules are on track. Your role will involve coordinating with various departments such as engineering, procurement, and construction support to ensure the successful execution of projects. Your hands-on experience in material selection, equipment sizing, and performance evaluation within Petrochemical, Chemical, and oil and gas industries will be invaluable. You will be required to review technical documents such as TBE, ISO drawings, and 3D models while adhering to design codes and regulations such as ASME, API, and ASTM. Furthermore, you will lead a Mechanical team responsible for Process & utility areas, participate in safety reviews, and coordinate with different departments for project implementation. Your ability to manage multiple projects, prioritize tasks, and work effectively under pressure will be essential. You will also be involved in post-order management, procurement activities, and documentation for project plans. To excel in this role, you must possess strong technical knowledge as a competent Mechanical Engineer with excellent communication, organization, and coordination skills. Your track record in detail engineering and project execution will be crucial in ensuring projects are carried out in accordance with company procedures and safety standards. Your focus on timely, safe, and cost-effective project design and implementation will be key in successfully delivering projects from conception to commissioning.,

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. With a team of more than 36,000 people across over 70 countries, we are dedicated to improving the quality of life. At Arcadis, everyone plays an important role, and with the collective power of many curious minds, we aim to solve the world's most complex challenges and deliver impactful solutions together. We are looking for a Technical Director - Highways to join our growing team in India and collaborate with our US/Canada counterparts on technical delivery, focusing on highways/infrastructure projects. The ideal candidate should be well-versed in US standards such as ASSHTO and multiple DOT regulations, with expertise in the Design and Build Environment. It is desirable for the candidate to hold a Professional Engineer (PE) license in any part of the United States or Canada. As a Technical Lead at Arcadis, you will play a key role in delivering major projects, leading large projects and supporting multiple countries or service lines. You will be a recognized subject matter expert, influencing the growth and quality deliveries of the Global Excellence Centers (GECs). Your responsibilities will include leading the design and production of major highway and multidisciplinary projects, managing multi-disciplinary teams, interacting with internal and external stakeholders, and ensuring the technical delivery of projects meets quality, budgetary, and health and safety targets. Key Accountabilities: 1. Supporting Pursuits: Evaluate pursuit opportunities and contribute insights on capacity and capability. Streamline decision-making processes for pursuing projects. 2. Bid Writing Assistance: Enhance bid writing capabilities and ensure proposals meet quality and consistency standards. 3. Cross-Disciplinary Coordination: Facilitate communication between different disciplines and collaborate on compelling proposals. 4. Resource Acquisition Support: Identify resource needs for projects and coordinate with departments or external partners for resource acquisition. 5. Knowledge Transfer Assistance: Support knowledge transfer initiatives and ensure best practices are shared among teams. 6. Team Mentor: Develop regional teams and oversee competence and quality through a robust Quality Management System. 7. Major Projects: Handle and deliver Design & Build and State DoT projects, lead multi-disciplinary projects, and contribute to project reviews and resource management. Qualifications & Experience: - Masters in Transportation/Highway Engineering. - Minimum 15+ years of experience in Infrastructure Design Consulting industry. - Proficiency in written communication and bid writing processes. - Familiarity with industry standards and service offerings. - Strong organizational and coordination skills. - Internationally recognized professional qualification. - Excellent written and spoken English communication skills. At Arcadis, we value diversity, inclusion, and belonging. We believe in empowering our employees to be their best and contribute meaningfully to creating sustainable solutions for a better world. Join Arcadis and be a part of our mission to create a lasting legacy.,

You will be joining Adani Airports Holding Limited as a Senior Executive - Design, where you will play a crucial role in executing key design tasks and overseeing team efforts to ensure the successful completion of design components. Your responsibilities will include managing the execution of architectural designs, conducting site inspections, coordinating with stakeholders, preparing project documentation, and assisting in risk assessment and feasibility studies. As a Senior Executive - Design, you will be responsible for creating and updating architectural drawings and models, implementing revisions based on feedback, and ensuring timely completion of design components while adhering to project deadlines. You will conduct site inspections, document findings, and integrate site analysis into design plans. Additionally, you will act as a point of contact between the design team and project stakeholders, organize meetings, and incorporate feedback to align design work with project goals. Your role will also involve supporting the preparation of design reports, presentations, and project documentation, ensuring compliance with project standards and regulatory requirements. You will assist in identifying and managing potential risks related to design and construction processes, as well as participate in feasibility studies to evaluate design proposals in terms of technical specifications, cost implications, and alignment with airport development goals. Key stakeholders you will collaborate with include the Lead - Design, Senior Architects, Project Managers, Engineering and Maintenance Teams, Urban Planning Authorities, Construction Contractors, Real Estate Developers, Environmental Regulatory Bodies, and Local Community Representatives. To qualify for this role, you must hold a Bachelor's degree in Architecture, Urban Design, or a related field, along with a minimum of 5-8 years of experience in architectural design, preferably with exposure to city-side or large-scale development projects. Join us at Adani Airports Holding Limited and contribute your technical skills to the effective and timely completion of design projects, shaping the future of airport infrastructure in India.,

You are being sought after to fill the role of Lead Piping Engineer in a renowned company that specializes in Power & Energy projects. Based in Bangalore at the Global Design Centre, this position requires a minimum of 15 years of experience in the field. In this role, your primary responsibility will be to oversee the piping design, analysis, and optimization processes for intricate power plant and energy ventures. Your expertise will be pivotal in delivering top-notch engineering solutions and directing a diverse team of professionals. Your tasks will include managing various piping design components such as layouts, isometric drawings, and 3D models. You will conduct stress and flexibility analysis utilizing tools like CAESAR II or equivalent software. Developing piping specifications, Material Take-Offs (MTOs), and line lists will also be part of your mandate. Ensuring adherence to industry standards such as ASME, API, and project-specific requirements is crucial. Additionally, your involvement in design reviews, 3D model assessments, and risk assessment workshops will be essential. Collaboration with vendors, addressing technical queries, and providing support during construction, commissioning, and startup phases will also be expected. To qualify for this role, you should hold a Bachelor's degree in Mechanical Engineering (preferably with a PE license) and possess over 15 years of experience in piping engineering within the power or oil & gas sectors. A solid background in combined cycle power plants and gas turbines is essential. Proficiency in tools like CAESAR II, AutoCAD, and PDMS/SP3D is required. An in-depth understanding of safety protocols, regulations, and environmental standards is necessary. Exceptional problem-solving abilities and a collaborative mindset are highly valued. Flexibility to travel or work at project sites when needed is expected. If you are excited about this opportunity, please share your CV at vikash.kushawaha@smec.com and become part of groundbreaking energy projects that contribute to a sustainable future.,

1.Statistical and Management of Energy Load in Factory Buildings 2.Daily maintenance and management of production facilities 3.Daily maintenance and management of production fixtures 4.Maintenance of ESD&EOS 5.Construction Safety, Quality and Progress Control of Engineering Reconstruction 6.Daily management of low-voltage power distribution facilities 7.New production setup & project budget and construction managment 8.Personnel Skills Training and Management 9. Investigation and rectification of fire safety and electrical safety hidden dangers in workshop Education - B.E., B.Tech & Above EEE,Mechanical & Instrumentation

Role description: We are now recruiting talented individuals to fill our current vacancy for Senior Engineer (Process Mechanical) to work on our projects in Navi Mumbai/Bangalore/Hyderabad Role accountabilities: Preliminary and Detail design of the process mechanical systems associated with municipal and industrial water and/or wastewater treatment facilities and pump stations Working independently as well as with a team on variousprojects in line with client requirement. Leading and supervising the design team andensure the project is delivered with high quality withinthe program and budget Liaising with the lead region to demonstrate an understanding of scope, knowledge, and experience to provide innovative design solutions as per best engineering practices. Working in collaboration with other design disciplines to ensure the integrity of the overall design Diligent focus on the quality of deliverables Manage project budget and schedule Building a profile in the industry and keeping up-to-date with innovations and developments Coaching & Mentoring of junior staff Compliance to the Arcadis Health and Safety standards Qualifications & Experience: B.E / B. Tech in Mechanical, Civil, and Environmental Engineering from a recognized University. M.E/M. Tech desirable. 4 to 6 years experience in designing mechanical and process equipment for water supply & water treatment plants, sewerage & sewage treatment plants and drainage system. Required Competencies: Proficiency in designing and analyzing hydraulic systems such as pump stations, including pumps, valves, and pipelines. Knowledge of AutoCAD MEP, MEP Revit, Navisworks is a must. Ability to prepare and check general specifications, mechanical specifications, contract documents etc. Hands-on experience with site supervision, construction support, and commissioning activities. Experience in review of P&ID drawings related to the water and wastewater treatment process. Possess strong technical background and capability to design raw and potable water pumping station, sewage pumping stations, particularly in association with pumps and associated piping, preparation of pump curve, selection of pumps, air blowers, chlorination equipment building services, Exposure to piping standards for ductile iron and/or steel large diameter pipes and drafting material specification is a must Knowledge of international codes, standards and practices related to UK/Middle East/ USA water industry is preferable. Understanding of health and safety standards and environmental regulations. Experience within a consultancy environment specifically in the water/wastewater industry will be preferred Must have previously worked during various phases of the project cycle from feasibility to commissioning of water/wastewater pumping station and treatment plants Strong verbal and written communication skills in the English language, with good report writing, analytical and computer skills.

Position: Jr. Draftsman Location: Kothur, Hyderabad Position Summary: We are seeking a motivated and detail-oriented Junior Draftsman to join our DL Engineering team. The ideal candidate will support our engineering projects through 2D and 3D drawing modification, onsite construction support, and technical documentation maintenance. Key Responsibilities: 2D and 3D Drafting: Modify and create detailed drawings using AutoCAD and Fusion 360, ensuring accuracy and adherence to project specifications. Onsite Construction Support: Provide assistance during construction phases, collaborating with site engineers to address any drawing-related queries. Technical Documentation Maintenance: Organize and update technical documents, ensuring all records are current and accessible. Mechanical Support: Assist in mechanical design tasks and provide support in troubleshooting and resolving design-related issues. Educational Qualifications: Bachelor of Engineering (BE) or Bachelor of Technology (B-Tech) in Mechanical Engineering or a related field. Key Competencies & Skills Required: Proficiency in AutoCAD for 2D drafting. Familiarity with Fusion 360 for 3D modeling. Knowledge of Microsoft Project for project management and scheduling. Strong attention to detail and accuracy in drafting. Effective communication skills to collaborate with team members and onsite personnel. Varun Shrivas TA | HR ASHKOM MEDIA INDIA PVT. LTD. Mobile : +91-6262600059 / 8989271488 Website: www.ashkom.com

Position: Jr. Draftsman Location: Kothur, Hyderabad Position Summary: We are seeking a motivated and detail-oriented Junior Draftsman to join our DL Engineering team. The ideal candidate will support our engineering projects through 2D and 3D drawing modification, onsite construction support, and technical documentation maintenance. Key Responsibilities: 2D and 3D Drafting: Modify and create detailed drawings using AutoCAD and Fusion 360, ensuring accuracy and adherence to project specifications. Onsite Construction Support: Provide assistance during construction phases, collaborating with site engineers to address any drawing-related queries. Technical Documentation Maintenance: Organize and update technical documents, ensuring all records are current and accessible. Mechanical Support: Assist in mechanical design tasks and provide support in troubleshooting and resolving design-related issues. Educational Qualifications: Bachelor of Engineering (BE) or Bachelor of Technology (B-Tech) in Mechanical Engineering or a related field. Key Competencies & Skills Required: Proficiency in AutoCAD for 2D drafting. Familiarity with Fusion 360 for 3D modeling. Knowledge of Microsoft Project for project management and scheduling. Strong attention to detail and accuracy in drafting. Effective communication skills to collaborate with team members and onsite personnel. Varun Shrivas TA | HR ASHKOM MEDIA INDIA PVT. LTD. Mobile : +91-6262600059 / 8989271488 Website: www.ashkom.com

Position: Jr. Draftsman Location: Kothur, Hyderabad Position Summary: We are seeking a motivated and detail-oriented Junior Draftsman to join our DL Engineering team. The ideal candidate will support our engineering projects through 2D and 3D drawing modification, onsite construction support, and technical documentation maintenance. Key Responsibilities: 2D and 3D Drafting: Modify and create detailed drawings using AutoCAD and Fusion 360, ensuring accuracy and adherence to project specifications. Onsite Construction Support: Provide assistance during construction phases, collaborating with site engineers to address any drawing-related queries. Technical Documentation Maintenance: Organize and update technical documents, ensuring all records are current and accessible. Mechanical Support: Assist in mechanical design tasks and provide support in troubleshooting and resolving design-related issues. Educational Qualifications: Bachelor of Engineering (BE) or Bachelor of Technology (B-Tech) in Mechanical Engineering or a related field. Key Competencies & Skills Required: Proficiency in AutoCAD for 2D drafting. Familiarity with Fusion 360 for 3D modeling. Knowledge of Microsoft Project for project management and scheduling. Strong attention to detail and accuracy in drafting. Effective communication skills to collaborate with team members and onsite personnel. Varun Shrivas TA | HR ASHKOM MEDIA INDIA PVT. LTD. Mobile : +91-6262600059 / 8989271488 Website: www.ashkom.com

supporting senior architects and designers in various stages of architectural projects.assisting with design development, preparing construction documents, conducting site visits, and researching building codes and regulations.