2951 Construction Jobs - Page 6

Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements.

Performing basic architecturalcalculations. Preparing specifications, reports and related data tables. Maintaining liaison with design and drafting groups. Preparing, reviewing, and approving drawings as required. Under the direction of the Supervising Architect, may independently perform advanced technical assignments of various complexities within approved schedules and budgets. May coordinate technical and administrative activities with employees in other disciplines and other departments participating on an assigned project. May assist in the training and evaluation of assigned architectural and design/drafting personnel. May review and approve conceptual designs. May assist in the development of new architectural methods and techniques. Performing basic architectural/engineering calculations. Qualifications A Bachelor of Architecture is required Applicants are required to have between 13-18years of experience in Architecture, Middle East/US/UK experience would be desirable but are not essential. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Should have good skills in software like Autodesk Revit, AutoCAD, MicroStation and other related design software Should have basic transport architecture experience and should have worked in Workplace interiors. Should be keen to learn and develop new methods and software. Proven ability in delivering projects under tight timelines. Responsible for providing architectural guidance, calculations, analysis, studies and recommendations for a specialized segment of the Architectural Discipline within the schedules and budget of an assigned project. May manage various size groups of architects, designers and/or specialists. May work on modest size projects and/or assist Project Architectural or Engineering Managers with higher grades.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to Junior level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Overall 8+ years of work experience is preferred. Minimum Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently. Energy Modelling , Building Performance analysis & IES Software skills listed in detail below. Utilize the energy modelling software like IES VE to simulate the building performance and energy consumption Analyze the data received from client and data from energy results and provide the best energy efficient solutions to tam Collaborate with the multidisciplinary teams for various inputs and outputs to do the efficient design process Ability to work on Cooling/Heating loads, Energy consumption and building performance in IES VE or any other modelling software Familiarity with ASHRAE 90.1, 62.1, 55 and CIBSE requirement Knowledge of Mechanical system architecture and components

Able to develop project specific implementation strategies and collaborate with project teams to ensure BIM success by Standardize and document Revit workflows & best practices. Able to handle or lead multiple projects with help of Project Designers. Assist BIM- Associate in preparing BIM Guidelines for project specific requirements. Assist BIM Manager in training of project personnel in the use of BIM tools. Create and Maintain BIM Models for Project Specific . Able to identify conflicts, incomplete or ambiguous design information and discuss with engineering team and coordinate with other discipline teams. Attend or manage model coordination meetings and document project preconstruction / BIM meetings. Create new library components and maintain once project is over. Provide ongoing support for all BIM applications and work closely with Design. Generating BIM documents to submit for construction/bidding purposes and Participate in Structure Coordination phases of projects when Revit models are required for clash detection. Maintain BIM standards and design templates to ensure quality and consistency of design environment and deliverables throughout various offices worldwide. Review and QA/QC project deliverables. Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. Min.6+ years Experience Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team

Must have good experience delivering Landscape Design/ Public Realm projects in the private or public sectors. Must be familiar with design, tender and construction processes. International experience of the UK, Middle East or APAC regions will be considered an added advantage. Must be proficient in design detailing and construction techniques. Must be proficient in, but not limited to, AutoCAD, Revit, Adobe Creative Suite (photoshop, InDesign and Illustrator), MS Office, SketchUp, Rhino and rendering softwares like Lumion/ Enscape/ Twinmotion. Advanced experience of BIM related software in Landscape Design/ Infrastructure works will be considered an added advantage. Candidate should be able to assign work to junior team members and BIM technologists. Use business related software independently with ability to guide junior team members. Candidates should demonstrate competency in softwares, clear communications skills to gain understanding of the required tasks, quick and a methodical decision-making approach for the design & related tasks. Qualifications A Masters degree in Landscape Architecture from universities of International repute will be an added advantage Applicants are required to have between 7-10years of experience in Bachelors degree holders in Landscape Architecture or Architecture will be considered, if they can showcase relevant experience in Landscape Design project stages including design, documentation and site implementation Chartered candidates shall have an added advantage.

Must have good experience delivering Architecture Designprojects in the private or public sectors. Must be familiar with design, tender and construction processes. International experience of the UK, Middle East or APAC regions will be considered an added advantage. Must be proficient in, but not limited to, AutoCAD, Revit, Adobe Creative Suite (photoshop, InDesign and Illustrator), MS Office, SketchUp, and rendering softwares like Lumion/ Enscape/ Twinmotion. Advanced experience of BIM related software in Landscape Design/ Infrastructure works will be considered an added advantage. Qualifications Bachelors degree holders in Architecture/Diploma -Architecture will be considered, if they can showcase relevant experience in Architecture BIM Design project stages including design, documentation and site implementation. Applicants are required to have between 11+years of experience in relevant field . Chartered candidates shall have an added advantage. Have a logical and organized approach to project delivery and able to follow instructions and guidance by senior team members.

Refers to the field of engineering dealing with the analysis and design of structures that support or resist loads. Commonly involved in the design of buildings and large nonbuilding structures, but can also be involved in the design of machinery, medical equipment, vehicles or any item where structural integrity affects the function or safety of an item. Discipline concerning force resisting and load bearing members and their connections for structures such as foundations, bridges, walls, columns, slabs, beams, trusses or similar members used singly or as part of a larger structure." Duties and Responsibilities Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 5+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Structural, Mechanical, Civil and Electricaldesign is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with PLS CADD, PLS TOWER, PLS POLE, Staad Pro, Microstran or other similar software tools is highly desirable Chartership or Fellowship with ICE or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 8+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Designs and develops electrical systems and components for various projects. Creates and modifies electrical schematics and wiring diagrams using CAD software. Conducts load calculations and performs electrical system analysis. Collaborates with cross-functional teams to ensure integration of electrical systems with other engineering disciplines. Prepares technical reports and documentation for project deliverables. Assists in the development of project specifications and cost estimates. Participates in site visits to gather information and assess existing electrical installations. Ensures compliance with relevant electrical codes and standards in all designs. Contributes to continuous improvement initiatives within the electrical engineering department. Qualifications Qualifications: Bachelor's degree in Electrical Engineering required; Master's degree preferred Minimum of 3-5 years of experience in electrical design for commercial or industrial projects Professional Engineer (PE) license preferred Proficient in at least one of the load calculation software such as AMTECH and ETAP Skilled in using one or more lighting calculation software (e.g., AGi32, DIALux) Proficient in use of Revit and AutoCAD. Working knowledge of Navisworks is required Experience with Building Information Modeling (BIM) and 3D modeling software Thorough understanding of National Electrical Code (NEC) and other relevant industry standards Knowledge of power distribution systems, lighting design, and control systems Familiarity with energy-efficient design practices and LEED certification requirements Strong analytical and problem-solving skills Excellent communication and interpersonal skills for collaborating with cross-functional teams Ability to manage multiple projects simultaneously and meet deadlines Willingness to travel for site visits and client meetings as needed Commitment to continuous learning and staying updated with industry trends and technologies

Duties & Responsibilities Serves as lead engineer on mid- to large size projects. Provides specialized technical input to studies and design for staff's specific area of expertise. Approves and signs off on work. Provides technical expertise for studies and design efforts. Presents complex technical solutions to clients. Performs quality control reviews of work developed by others. Participates in development of technical proposals. Provides estimates for the engineering budget and schedule to meet requirements on large projects. Oversees and coordinates HVAC system design for complex projects. Develops and implements energy-efficient HVAC solutions. Mentors and guides junior engineers in HVAC design principles. Ensures compliance with local and national building codes and regulations. Collaborates with cross-functional teams to integrate HVAC systems with other building components. Conducts site visits to assess existing HVAC systems and recommend improvements. Stays current with industry trends and emerging technologies in HVAC design. Qualifications Minimum Bachelor's degree in Mechanical Engineering or related field + 15years of relevant experience, or demonstrated equivalency of experience and/or education Professional Engineering (PE) license in HVAC Extensive knowledge of HVAC systems, design principles, and energy-efficient solutions Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP, Trane TRACE) Strong understanding of building codes and ASHRAE standards Excellent project management and leadership skills Superior communication and presentation abilities Demonstrated experience in managing mid to large-size HVAC projects Preferred Qualifications Master's degree in Mechanical Engineering or related field LEED AP certification Experience with Building Information Modeling (BIM) Knowledge of sustainable design practices and renewable energy systems Familiarity with commissioning processes Experience in mentoring junior engineers Active participation in professional organizations (e.g., ASHRAE, USGBC)

Contribute to engineering design assignments in a team environment on large-scale project teams. Candidate should have minimum 2years working experience on wastewater modelling for ANZ and UK & I region especially on model calibration & verification. Candidate should be well versed with Infoworks ICM hydraulic modelling software. Having hands on experience with modeling tools like Water GEMS, SewerGEMS, StormCAD, PCSWMM, HEC-RAS, GeoPak would be advantage. Capable for leading the project, coordinating with Lead Office, mentoring juniors and ensuring quality checks. Complete design activities to specified standards including earthworks modelling and design, sanitary and storm sewer design, watermain design, grading of roads and drive isles, lot grading, and stormwater management design of ponds and other retention systems. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). Highly motivated, hardworking, interpersonal, and enthusiastic team player that is willing to learn and adapt to change. US/UK/Canada Experience will be added advantage Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team

AECOM is seeking a Principal Engineer - Building Structures be based inBengaluru/Gurgaon India. Candidates will be responsible for the following activities: Develops technical solutions to a wide range of difficult problems. Works under only general direction. Independently determines and develops approach to solutions. Experience in retail and hospitality medium to large projects. Experience in UK, UAE, US, Canada, ANZ(preferred). Experience in delivering projects in BIM and relevant discipline software. Receives instructions on specific assignment objectives, complex features, and possible solutions. Should be knowledgeable in building design services, associated regulations and technical standards. Capable of working on as own initiative, as an overall responsibility and accountability for assigned work. Effective communication skills. Good attention to details. Must be a team player and possess strong interpersonal skills. Must be able to make decisions, act on own initiative and operate in a pro-active way. Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Maintains affiliation with professional societies to keep abreast of current technologies. Accountability for assigned work. Accuracy & precision of work. Qualifications The successful candidate will have the following Qualifications: Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Applicants must have between 8-12years of experience in CivilEngineering, Middle East/US/UK experience, which would be desirable but are not essential. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, and able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team.

Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Qualifications Minimum Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Overall 7+ years of work experience is preferred.

Preparation of structural calculation reports, design calculations using Excel and other in-house software, and analysis of load transfer mechanisms. Excellent technical skills in design for Concrete structures. Able to correlate and interpret the data shared by supporting interdisciplinary teams. Coordinate and collaborate effectively with the other disciplines. Familiarity with international codes, including Eurocodes, American codes, Australian standards, and British Code of practices. Able to work effectively in a diverse team spread across various geographical locations Familiarity with various software packages, ideally including MIDAS, Autodesk Robot, STAAD Pro, ETABS, and SAFE, with a preference for experience in Finite Element Analysis. Strong understanding of safety in design and related practices Performs and ensures quality control reviews of design calculations and drawings. Excellent written and verbal communication skills. Flexible to adopt new challenging tasks as per business requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Working towards Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). 3 to 6 years of experience as a structural design engineer, preferably with a focus on water and wastewater-related design projects.

Must have good experience delivering Landscape Design/ Public Realm projects in the private or public sectors with domestic/international clients/stakeholders Must be familiar with design, tender and construction processes. International experience of the UK, Middle East or APAC regions will be considered an added advantage. Must be proficient in design detailing and construction techniques. Must be proficient in, but not limited to, AutoCAD, Revit, Adobe Creative Suite (photoshop, InDesign and Illustrator), MS Office, Bluebeam. Advanced experience of BIM related software in Landscape Design/ Infrastructure works will be considered an added advantage. Accountable for the results of the discipline department and adherence to approved project budgets. Supports business change management initiatives, recruits, trains, mentors, evaluates the department's staff, and assists the various disciplines in identifying and developing skills. Accountable for the project's budget for a the discipline of LS Architecture Peer review the team's work; take the lead on project design, project presentation, and client communication. Report on performance and compliance of staff and projects to management and provide mitigation plans where necessary. Attend creative landscape architecture project reviews and design sessions, steer project directions, deliver thought leadership presentations, and inspire peers and reports. Attend to project deliverables quality reviews when necessary report on any non-compliant project deliverables teams. Facilitate staff development of market-required skills through continuous reviews of new market trends. Work closely with the senior leadership to manage ongoing financial performance and projected financial plans. Manage bids and proposals, establish winning themes, and define differentiators. Develop and implement initiatives that can assist in expanding work assignments, scope, and accounts, including managing client relationships and expectations. Attend key client meetings and presentations and manage the stakeholders to the best interest of both the client and the company. Lead proposals as a capture lead and help build the pipeline of work to meet targets. Candidate should be able to assign work to junior team members and BIM technologists. Use business related software independently with ability to guide junior team members. Candidates should demonstrate competency in software, clear communications skills to gain understanding of the required tasks, quick and a methodical decision-making approach for the design & related tasks. Qualifications A Masters degree in Landscape Architecture from universities of International repute will be an added advantage Applicants are required to have between 14+years of experience in Landscape Bachelors degree holders in Landscape Architecture or Architecture will be considered, if they can showcase relevant experience in Landscape Design project stages including design, documentation and site implementation Chartered candidates shall have an added advantage.

Prepare detailed reinforcement drawings for concrete structures in accordance with BS/Euro codes. Utilize software such as Cads RC, AutoCAD, and Microstation proficiently to produce high-quality drawings. Demonstrate a strong understanding of Revit basics, with the ability to create and modify models. Collaborate effectively with design engineers to ensure drawings meet design requirements and specifications. Coordinate with other disciplines to ensure constructability and avoid clashes. Produce bar bending schedules, detailing reports, and other related documentation. Review and check drawings for accuracy, completeness, and compliance with codes and standards. Stay up-to-date with industry standards and best practices. Additional Advantages: Experience with Bentley Rebar software. Ability to use Revit 3D reinforcement add-ons for advanced detailing. Qualifications Minimum of 5-10years of experience in RC detailing. In-depth knowledge of BS/Euro codes for concrete design and detailing. Proficiency in Cads RC, AutoCAD, and Microstation. Strong understanding of Revit basics. Excellent attention to detail and accuracy. Effective communication and teamwork skills. Problem-solving skills and the ability to work independently.

Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise Develops study and design procedures to facilitate high quality cost effective work by others Participates in interdisciplinary review of project deliverables Develops construction cost estimates and estimates of technical efforts for projects Uses expertise in all steps of completing discipline component of PS&E package Performs quality control review of design calculations or drawings Prepares technical specification sections Provides input to the development of engineering budget and schedule to meet requirements Leads and mentors junior engineers and technicians in electrical design principles and best practices Collaborates with cross-functional teams to integrate electrical systems with other engineering disciplines Develops and implements innovative solutions to complex electrical engineering challenges Ensures compliance with relevant electrical codes, standards, and regulations Conducts feasibility studies and risk assessments for new electrical design projects Represents the company in technical forums and industry conferences related to electrical engineering Qualifications Minimum BA/BS in Electrical Engineering + 10YORE or demonstrated equivalency of experience and/or education Professional Engineering (PE) license in Electrical Engineering Extensive experience in electrical system design, including power distribution, lighting, and control systems Proficiency in electrical design software such as AutoCAD Electrical, ETAP, or similar tools Strong knowledge of National Electrical Code (NEC) and other relevant industry standards Demonstrated leadership experience in managing complex electrical engineering projects Excellent problem-solving and analytical skills Strong communication and interpersonal skills, with the ability to work effectively in cross-functional teams Experience in developing and reviewing technical specifications and construction documents Familiarity with energy-efficient design principles and sustainable engineering practices Ability to mentor and guide junior engineers and technicians Preferred Qualifications Master's degree in Electrical Engineering or related field Additional certifications such as LEED AP, CEM, or PMP Experience with Building Information Modeling (BIM) software Knowledge of emerging technologies in electrical engineering, such as smart grid systems or renewable energy integration

AECOM is seeking a Principal/Senior Principal Engineer - Water Infrastructure to be based in Bengaluru/Gurgaon/Mumbai, India. Candidates will be responsible for the following activities: 12+ Years (Exposure to outside India projects preferably UK, USA, Canada, MER & ANZ region ) Having hands on experience for Design of wet utilities - Potable Water, Storm Water Drainage, Highway Drainage, Treated Sewage Effluent & Sewerage network (pressure plus gravity design experience with the help of AutoCAD 2D, AutoCAD Civil3D, Open Roads & MicroStation) Capable of designing the pumping stations, general arrangement, road/bridge crossing structures, typical valve chambers etc. Having experience with any Hydraulic modeling tools like Water Hammer, Sewer GEMS/Infoworks ICM, Infoworks WS Pro/ WaterGEMS, Info Drainage, HEC-RAS would be advantage. Provide technical support to designers for relocation/shifting of assets, asset tagging, connection drawings, standard drawings etc. Clash Analysis experience using Navisworks Experience in working in Common Data Environment (ProjectWise, BIM 360, ACC) Capable for leading the project, coordinating with Lead Office, mentoring juniors and ensuring quality checks Should be capable of leading multiple projects with different geographical locations same time. Provides training and technical support to Engineers, designers on understanding design standards, adopting digital tools Additional skills like team management, project management, resource planning, project budget planning, estimation is must Qualifications The successful candidate will have the following Qualifications: Masters in civil / water resources / Environment / PHE Preferable to have or working towards Professional Qualification such as C.Eng. (ICE) or C.Eng. (IET) or C. CIWEM. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work.

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

AECOM is seeking a Engineer - Building Structures be based inBengaluru/Gurgaon India. Candidates will be responsible for the following activities: Develops technical solutions to a wide range of difficult problems. Works under only general direction. Independently determines and develops approach to solutions. Experience in retail and hospitality medium to large projects. Experience in UK, UAE, US, Canada, ANZ(preferred). Experience in delivering projects in BIM and relevant discipline software. Receives instructions on specific assignment objectives, complex features, and possible solutions. Should be knowledgeable in building design services, associated regulations and technical standards. Capable of working on as own initiative, as an overall responsibility and accountability for assigned work. Effective communication skills. Good attention to details. Must be a team player and possess strong interpersonal skills. Must be able to make decisions, act on own initiative and operate in a pro-active way. Confident, with the ability to work either independently or as part of a team. Ability to work to deadlines and under pressure. Maintains affiliation with professional societies to keep abreast of current technologies. Accountability for assigned work. Accuracy & precision of work. Qualifications The successful candidate will have the following Qualifications: Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Applicants must have between 2-6years of experience in CivilEngineering, Middle East/US/UK experience, which would be desirable but are not essential. Good communication skills, and ability to work well independently at times. Able to see the bigger picture and take a birds-eye view of projects Confident, and able to work independently or as part of a team. Ability to work to deadlines and under pressure. Accountability for assigned work. Accuracy & precision of work. Willingness to learn and develop. Excellent written and verbal communication skills Strong problem-solving skills Enthusiastic and Self-motivated. Work well within a multidisciplinary team.

Preparation of structural calculation reports, design calculations using Excel and other in-house software, and analysis of load transfer mechanisms. Excellent technical skills in the design for Concrete and steel structures. Coordinate and collaborate effectively with the other disciplines. Leading a team of engineers and CAD technicians as per project requirements Able to provide technical support to the project team and managing the projects independently. Experience in complete life cycle of a design project within Water and Wastewater environment Strong problem-solving skills, with the ability to propose alternative solutions for encountered issues. Familiarity with international codes, including Eurocodes, American codes, Australian standards, and British Code of practices. Able to work effectively in a diverse team spread across various geographical locations. Familiarity with various software packages, ideally including MIDAS, Autodesk Robot, STAAD Pro, ETABS, and SAFE, with a preference for experience in Finite Element Analysis. Strong understanding of safety in design and related practices Performs and ensures quality control reviews of design calculations and drawings. Excellent written and verbal communication skills. Flexible to adopt new challenging tasks as per business requirements. Working towards Chartered Engineer (CEng) status will be advantageous. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Working towards Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). 7 to 12 years of experience as a structural design engineer, preferably with a focus on water and wastewater-related design projects.

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Designs and optimizes plumbing, heating, and ventilation systems for various types of buildings and structures. Conducts energy efficiency analyses and proposes improvements to existing PHE systems. Collaborates with architects, structural engineers, and other professionals to ensure integrated design solutions. Develops and maintains project schedules, ensuring timely completion of PHE design deliverables. Mentors junior engineers and provides technical guidance on complex PHE design issues. Participates in client meetings to present design concepts and address technical queries. Ensures compliance with relevant building codes, standards, and regulations in PHE system designs. Performs quality control checks on PHE designs and documentation before final submission. Contributes to the development of in-house design standards and best practices for PHE systems. Qualifications Minimum Bachelor's degree in Mechanical Engineering, Civil Engineering, or related field 7+ years of experience in PHE design for commercial and industrial projects LEED AP certification Experience with Building Information Modeling (BIM) and Revit Knowledge of fire protection systems, including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Familiarity with energy modeling and analysis software Experience with Navisworks for clash detection and coordination Strong project management skills and experience leading design teams Excellent communication skills, both written and verbal Experience in client-facing roles and ability to present technical information to non-technical audiences