14 Comsol Jobs

AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

AECOM is seeking for a candidate to be based in Bengaluru or Gurgaon. Candidate will be responsible for the following activities: Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Minimum Overall 8+ years of work experience is preferred. Previous experience in HV Cable OEM design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Underground HV Cables design is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with CYMCAP or other similar software tools for EHV/HV AC and DC Cable Ampacity calculations, EMTP Calculations and modelling expertise is highly desirable Chartership with IET-UK or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Reporting to Director/Promoter Reporting in TBD Position Overview The Head of Design at Mahati Industries is responsible for developing and implementing innovative design strategies that align with business objectives, enhance brand identity, and drive user engagement. Experience Minimum of 12 years of experience in electrical design of transformers. Proven track record of developing and executing successful design strategies. Familiarity with design thinking methodologies and user-centered design principles. Qualifications Bachelors/Masters Electrical Engineering Responsibilities Develop and communicate the overall design vision and strategy for Mahati Industries. Oversee all design projects, ensuring high-quality execution and alignment with brand guidelines and business goals. Collaborate closely with cross-functional teams (e.g., Product, Marketing, Engineering) to integrate design thinking into the product development process. Establish and maintain design standards, processes, and best practices. Conduct user research and gather feedback to inform design decisions. Stay updated on industry trends and emerging design technologies. Manage design budgets and resources effectively. Present design concepts and solutions to stakeholders at various levels. Key Competencies Strategic Thinking: Ability to develop long-term design strategies that support business objectives. Design Leadership: Proven ability to inspire, motivate, and guide a design team. Communication & Presentation: Excellent verbal and visual communication skills to articulate design concepts and rationale effectively. Collaboration: Ability to work effectively with cross-functional teams and stakeholders. Problem-Solving: Strong analytical and problem-solving skills to address design challenges. Innovation & Creativity: A passion for design and a drive to explore new and innovative solutions. User-Centricity: A deep understanding of user needs and the ability to translate them into effective design solutions. Technical Proficiency: Solid understanding of design tools and technologies. Experience in design and analytical skills of transformers at least of up to 220 kV and above large furnace transformers and Locomotive 2 phase transformers Should have analytical capabilities for estimating the losses, forces, stray and Eddy losses, etc. Experience and conversant with using of design simulation software like VIT, Comsol, Ansys is added advantage.

Responsibilities & tasks Design / review and detailed engineering for HV power lines, HV cables, transmission, distribution substations Calculation of induced voltages due to nearby high voltage cables / Overhead lines Calculation of inductive and capacitive coupling Earthing and bonding concept including calculation of touch and step voltage Knowledge of fault condition in high voltage transmission grids Preparing / reviewing of high voltage power cables, HV lines, magnetic field calculations and layouts Preparing / reviewing specifications and design of HV power system and equipment Preparing / reviewing of magnetic field calculations using COMSOL, CDEGS, PSCAD and EMTP or similar software. Preparing man-hour estimation for CTR preparation and review of tender documents. Preparation and evaluation of general project documentation. Coordination and follow up of packages with system Vendor. Coordination with Transmission System Owner and substation owner / contractor, issue and follow up of CSS questionnaire. Review / Preparation and evaluation of general project documentation in addition to engineering deliverables. Handling multi discipline task-oriented projects. Handling and guiding designers and draughtsman. Qualification Qualifications & Experience Master/Bachelor of Electrical Engineering preferably high voltage engineering from recognized University Should have the experience of 15 to 20 years in High voltage design and planning activities Experience of at least 3 years in the consulting firm is a must. Experience in working on US and European projects preferred. Completed at least one substation project including HV side and GIS / AIS switchboards Designing various overhead power transmission, distribution lines, cables, magnetic field calculations including substation and lines at 33kV / 110kV / 132kV / 220kV / 230kV / 400kV / 765kV. Experienced in preparing technical specifications, design calculations, preparation of reports, drawings and bill of materials for HV power systems. Experienced in grounding / earthing, lightning, Experienced in parametric modelling of cables, transformers and other electrical Equipment in simulation tools Experienced in planning and design of overhead powerlines, underground HV cables, Substations and grid rearrangement. Experienced in resolving site queries, attended site meetings and performed site inspections during the construction phase of projects. Effectively utilize project management tools and software to manage costs, maintain schedules, track project progress, and manage the transmission line design projects. Experienced in HVAC and HVDC Transmission line design and concepts Experienced in COMSOL, CDEGS, PSCAD and EMTP or similar EMF/EMT software’s. Experienced in performing technical, economic and environmental studies Knowledge of various international standards for high voltage system Excellent in English skills oral and written is very important and a requirement Skilled user of Microsoft office – Excel, Word Project work within high voltage plants / stations Design/design in one or more of the following: Control boards for high voltage systems Control and monitoring for high voltage installations Relay protection for high voltage systems Components for high voltage systems Earthing and lightning protection systems Preparation of documentation for one or more of the following: Control boards for high voltage installations Control and monitoring of high voltage installations Relay protection of high voltage systems Components for high voltage systems Earthing and lightning protection systems Inspetion at the production site/site of components and assembly Participation in relevant tests at suppliers and at the production site/site. Follow-up of quality assurance documentation Personal competences Engineering skills with analytical approach Work as a team member with good interpersonal skills Structured working style with result-oriented approach Should be able to build and maintain good relationships with clients and colleagues Excellent in English skills oral and written is very important and a requirement Additional Information Working at Ramboll To work at Ramboll means being part of a people organisation. We are focused on knowledge sharing and collaboration across competence areas and geography, and we aim for a strong diversity among our employees. This enables us to solve a broad range of projects, and we firmly believe that cross-collaboration leads to creative and longstanding solutions. Thus, the possibilities at Ramboll are many and diverse –we invest a lot in the development of people and offer career paths tailored for each individual. Welcome to our Energy division Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,800 experts in 14 countries, covering the full spectrum of technologies and all parts of the value chain from production and transmission to distribution, we plan, design and implement energy solutions all over the world. Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. How to apply If you are interested in applying, please send your application through our online recruitment system by clicking the link ‘apply’ below. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application.

Responsibilities: * Collaborate with cross-functional teams on project delivery. * Design MRI RF coils and interfaces using Ansys & Comsol software. Contribute to the design of the MRI spectrometer and interface PCBs.

Job description ABOUT THE ROLE We are seeking a passionate and detail-oriented FEA Engineer Electric Motor Design to join our team and contribute to the structural, thermal, and electromagnetic analysis of electric motors. You will play a key role in validating and optimizing motor designs for performance and durability through simulation-driven development. Your role will be: Conduct electromagnetic, thermal, and structural FEA of electric motor components (stator, rotor, housing, etc.) Support the design team with simulation data to improve mechanical robustness and thermal performance. Use FEA tools like ANSYS, COMSOL to analyze stresses, vibrations, and deformations. Validate simulation results with test data and engineering calculations. Prepare technical reports and suggest design improvements.. YOUR CONTRIBUTION AT APROPOSDRIVE: Enhance the performance and reliability of next-generation electric motors through advanced simulation. Support the development of motors for EVs, appliances, and custom industrial solutions. Collaborate across teams to ensure simulation-backed design decisions are implemented effectively. Help establish internal simulation standards and best practices. WHAT WE ARE LOOKING FOR: Strong understanding of electric motors and electromagnetic analysis, supported by solid fundamentals in mechanical engineering, heat transfer, and structural mechanics . Hands-on experience with FEA tools such as ANSYS, COMSOL. Knowledge of electric motor structure and working principles. Experience with thermal simulations and mechanical stress analysis. Bonus: Exposure to electromagnetic analysis tools like JMAG or Motor-CAD. Good communication, report writing, and teamwork skills. Job Type: Full-time Education: B.E./B.Tech or M.E./M.Tech in Mechanical Engineering or related field Send your resume to: hr@aproposdrive.com Role: FEA Engineer Electric Motor Design Industry Type: Electric Mobility / Motor Technology / R&D Department: Mechanical Engineering / R&D Employment Type: Full-time Role Category: Engineering & Simulation Key Skills: FEA, ANSYS, COMSOL, Thermal Analysis, Structural Simulation, Electric Motor Design, CAD, Mechanical Engineering, Electromagnetic Analysis (Bonus) Job Type: Full-time Work Location: In person

Mechanical Engineer experience in Li-Ion Battery Pack CFD simulations. (with automotive background) EDUCATION : • BE/B.TECH in Mechanical Engineering/equivalent EXPERIENCE : • 5 to 7 Years of experience in Mechanical CFD simulations preferably having experience in automotive background. RESPONSIBILITIES : • Analyze the customer requirements, standards, product requirements and prepare detailed CFD simulation specification. • CFD simulation of Battery pack assembly – Heat Transfer Simulation considering fluid-solid bodies, considering thin components (e.g. 0.03mm thickness), Ohmic heating, using StarCCM. • Independently able to choose relevant physics for the given problem. • Meshing to be done in StarCCM. (experience in surface correction required to be done in StarCCM) • Perform 1D calculations before doing heat transfer analysis in StarCCM to confirm the simulation results. • Understand the simulation to be performed and set the judgement criteria for the analysis. Able to support the physics with strong theoretical knowledge in CFD. • Experience in Fluid Solid Interaction analysis. • Experience in cell chemistry analysis using COMSOL or GT-Suite preferably. • Prepare a detailed report for the analysis showing the Inputs received, Boundary Conditions considered for analysis, Material Details considered for analysis, detailed results, Result summary table showing OK/NG against Judgement criteria, convergence graph achieved, calculations done to support the analysis. • Estimation of effort and planning for CFD Analysis. • Heat transfer analysis on PCB with copper trace using FlowTherm. (considering ohmic heating, heat generation points on PCB, etc.) • Plan/strategize for the required analysis for analytical verification of concepts. SKILLSETS : • Experience in executing the Automotive project as per process standard – IATF16949 • Expertise in StarCCM, FlowTherm, COMSOL, GT-Suite and good theoretical and practical knowledge in CFD simulation. • Experience in 1D analysis for heat transfer problems. • Exposure in thermal cooling simulation techniques. • Knowledge in material selection based on various properties. • Able to co-relate the simulation results with actual validation results. • Knowledge of automotive & Li-Ion Battery test and regulatory standards – ISO, IEC, UN

Job Title: Vice President, Stack Engineering (India) Location: Bangalore/ Bengaluru Reports to: SVP, Engineering Position Overview We are seeking a visionary and experienced Vice President of Stack Engineering to lead the India-based engineering organization responsible for the development, scaling, and performance optimization of PEM (Proton Exchange Membrane) electrolyzer stacks. This role is critical to our mission of delivering clean, sustainable hydrogen solutions to the global energy market. The ideal candidate will be a seasoned engineering executive with deep technical and organizational expertise, particularly in electrochemical systems, battery technologies, or related fields. You will oversee a large and growing team of engineers and technical leaders, playing a pivotal role in shaping the future of our stack engineering capabilities and aligning them with strategic business objectives. Key Responsibilities Executive and Strategic Leadership Lead a large, multi-layered engineering organization, including multiple leaders of teams and functions. Shape and drive the long-term strategy for PEM electrolyzer stack development and integration with manufacturing and commercial teams. Collaborate across global functions to align product roadmaps, cost reduction initiatives, and quality improvements with business objectives. Influence company-wide technical and policy decisions as a member of the broader executive engineering leadership team. Foster a culture of accountability, innovation, continuous improvement, and leadership development within the engineering function. Technical and Functional Oversight Direct the design, development, and manufacturing transfer of PEM electrolyzer stacks. Oversee technical validation activities including material validation, contaminant tolerance studies, conditioning time optimization, and start-up protocol development. Lead design and construction of prototype stacks and coordinate validation through structured test plans in collaboration with internal test labs. Guide modeling and simulation efforts to support stack design and system integration. Own the technical interface with supply chain, operations, and NPI teams to ensure scalability and manufacturability. Stay current with the latest advancements in electrochemistry, stack component innovation, and competitive products; lead integration of best-in-class practices. Required Qualifications 15–20 years of engineering experience, with 10–12 years in people leadership and at least 7–10 years managing other leaders. Proven success in leading large, complex engineering organizations within high-tech manufacturing, electrochemical systems, or energy. Demonstrated ability to drive enterprise-level outcomes and influence cross-functional policy and decision-making. Demonstrated success scaling engineering solutions from concept to commercial production. Recognized industry expertise in electrochemistry, chemical engineering, or related fields, with a strong grasp of PEM systems and electrochemical cell technologies. Experience with lithium battery technologies or electrochemical stack architecture highly preferred. Strong executive presence, with the ability to collaborate effectively with C-suite and executive leadership teams. Exceptional strategic thinking, problem-solving, and organizational development skills. Global mindset and ability to lead across cultures and time zones. Excellent interpersonal and communication skills, with a track record of cross-functional collaboration and policy influence. Preferred Qualifications Ph.D. in Electrochemistry, Chemical Engineering, Mechanical Engineering, or a closely related discipline. Experience in commercial product development and scaling of advanced energy systems. Experience in lithium battery system design, testing, and commercialization. Exposure to large-scale product industrialization and cost optimization in an emerging technology space. Hands-on experience in simulation and modeling tools (e.g., COMSOL, ANSYS) for electrochemical systems. Deep understanding of stack reliability, manufacturability, and performance tradeoffs. Working knowledge of regulatory and safety frameworks related to hydrogen production systems. Key Competencies Technical Leadership: Expert in electrochemical stack design and testing; able to drive innovation and product improvement. Enterprise Influence: Able to shape cross-functional initiatives and drive global alignment. People Development: Builds, mentors, and scales high-performing technical teams; strong coaching and talent management skills. Strategic Thinking: Sees the big picture; connects long-term vision to immediate technical decisions. Collaboration & Communication: Leads through influence; effectively communicates complex concepts across audiences. Operational Discipline: Brings rigor to execution, documentation, and performance validation. Join us in shaping the future of sustainable energy. If you are a transformational engineering leader ready to drive the evolution of hydrogen technologies, we’d love to hear from you. Skills:- Accountability, Accountability, Battery Systems, Battery Technologies, Business Scaling, Cash Management, Chemical Engineering, Communication, Cross-Team Communication, Electrochemical Engineering, Engineering Design, Engineering Leadership, Executive Leadership, Executive Presence, Innovation, Interpersonal Communication, Leadership, Leadership Management, Leading by Influence, Lithium-Ion Batteries, Manufacturing Production, Materials Engineering, Mechanical Engineering, People Leadership, Problem Solving {+ 4 more} Education: - PhD Ohmium is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Design Head to lead design & engineering of transformers up to 132kV as per IS/IEC/BIS. Expertise in electromagnetic, thermal & mechanical design, ensuring compliance, quality & cost-effectiveness Oversee core, winding, insulation, & tank design Required Candidate profile Transformer Design Software: Electrical & mechanical design tools like ANSYS, FEMM, SolidWorks, AutoCAD, MathCAD, COMSOL, PTC Creo. Strong knowledge of IEC 60076, IS 2026, BIS, ANSI, IEEE norms

Title : Electrical Design and R&D Engineer - Low Voltage Switchgear Reports to: R&D Department Manager Key Responsibilities: Review electrical designs, drawings, and specifications for compliance with standards. Conduct research to improve existing products and develop innovative low-voltage switchgear solutions. Perform simulations and validations using tools like ANSYS, COMSOL or any similar software. Collaborate with mechanical engineers, QC, and procurement to ensure design feasibility and prototyping readiness. Document design changes and maintain detailed technical records. Qualifications: Bachelors degree in electrical engineering. 8+ years of experience in low voltage switchgear. Proficiency in simulation and CAD tools (e.g., Eplan, ETAP, ANSYS). Strong understanding of IEC standards and switchgear components.

Role & responsibilities We are seeking a skilled and innovative Permanent Magnet and Electromagnet Designer to join us. The ideal candidate will have a strong foundation in electromagnetics, magnetic material design, and hands-on experience in designing and optimizing permanent magnet systems and electromagnets. This role will involve collaboration with R&D, product development, and manufacturing teams to develop advanced magnet systems for applications in [aerospace, medical, automotive, energy, etc.]. 1. Job Role and Responsibilities: - Design and Development : Develop permanent magnet and electromagnet systems for specific applications, focusing on performance, reliability, and cost-effectiveness. Design magnetic circuits, optimize magnetic field strength, and minimize losses. Use analytical tools and simulation software (e.g., Ansys Maxwell, COMSOL, CST, or similar) for electromagnetic modeling and analysis. Material Selection : Select appropriate magnetic materials (e.g., NdFeB, ferrites, Alnico) based on application requirements. Evaluate the thermal, electrical, and mechanical properties of materials for design optimization. Testing and Prototyping : Collaborate with the prototyping team to build and test magnet assemblies. Conduct performance tests, measure magnetic field strengths, and troubleshoot issues. Collaboration : Work closely with cross-functional teams such as mechanical, electrical, and thermal engineers to ensure seamless integration of designs. Communicate with suppliers to source specialized materials and components. Documentation : Create detailed design documentation, including 2D/3D drawings, specifications, and BOMs. Maintain project reports and technical design reviews. 2. Skills & Experience Key Skills : Strong understanding of magnetostatics, electromagnetism, and hysteresis curves. Experience with material characterization and performance testing. Knowledge of thermal management and mechanical integration for magnetic systems. Familiarity with manufacturing processes for magnet systems, such as sintering, machining, and assembly. Additional Skills : Problem-solving and analytical thinking. Strong communication and team collaboration skills. Project management experience is a plus. Experience : Minimum 3 years of experience in designing permanent magnets and electromagnets . Proficiency in electromagnetic simulation tools. 3. Qualifications: Education : Bachelors or Masters degree in Electrical Engineering, Applied Physics, Microwave engineering or related fields with a focus on electromagnetics. Preferred Qualifications: Experience in designing magnetic systems for specific industries such as [medical imaging, electric vehicles, wind turbines, etc.]. Knowledge of international standards and regulations related to magnets and electromagnets. Familiarity with automation systems or robotics integration involving magnetics.

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: Qualcomm is a company of inventors that unlocked 5G - ushering in an age of rapid acceleration in connectivity and new possibilities that will transform industries, create jobs, and enrich lives. But this is just the beginning. It takes inventive minds with diverse skills, backgrounds, and cultures to transform 5Gs potential into world-changing technologies and products. This is the Invention Age - and this is where you come in. QUALCOMM is the world's leading developer of next generation wireless and multimedia technology. We are looking for a passionate Acoustic Engineer to join QUALCOMMs Advanced Tech R&D team. The ideal candidate will be responsible for the tuning and sound quality optimization of audio and voice for our range of products including earbuds, phones, and vehicles. You will apply your expertise in signal processing, acoustic simulation, and electroacoustic principles to enhance the auditory experience of our customers. Responsibilities: Implement, optimize, and validate audio signal processing and audio machine learning solutions for earbuds, phones, PCs, XR and vehicle audio systems. Conduct acoustic analyses and assessments for product development. Develop and validate acoustic models using simulation tools. Collaborate with cross-functional teams to design and integrate acoustic designs. Create performance reports and provide recommendations for sound quality improvements. Design and conduct audio listening experiments, including statistical analysis. Stay updated on the latest trends and technologies in acoustics. Minimum Qualifications Strong foundation in signal processing, acoustic theory, electroacoustic fundamentals. Proficiency in Python and/or MATLAB. Experience with audio signal modeling and algorithm development. Knowledge of C, C++, or other programming languages for audio applications. Familiarity with audio systems tuning and sound system calibration. Excellent problem-solving skills and attention to detail. Knowledge of machine learning and application to audio. Desired Qualifications Experience in FEA, BEM methods and COMSOL for acoustic simulation. Working experience with ApX and HEAD Acoustics for acoustic data capture and analysis. Working experience with statistical analysis tools (e.g. R) Experience in implementing electroacoustic laboratories Knowledge of electroacoustic standards such as 3GPP, ETSI, ITU-T, CTIA Education Requirements Required: Masters degree in engineering, Acoustics, Physics, or a related field + 3yrs or experience OR PhD in engineering, Acoustics, Physics, or a related field Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. Applicants :Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies :Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

L3 Support - Submarine Modem Technology Experience:4-8 Years Salary:15 -18 LPA Offshore Location:Bangalore (Preferred) Shift Timings No L3 -Support requirements (Ciena MCP, Infinera DNA) Sub-sea systems knowledge, specifically: Submarine modem technology, e.g.,Ciena Wave Logic, Infinera ICE Submarine Line Terminal Equipment / Photonics Power feed equipment Management systems (e.g., Ciena MCP, Infinera DNA) Submerged wet plant, e.g., repeater technology

Role : EMC Simulation Engineer Location : Cochin Role Overview: We are seeking a skilled and detail-oriented EMC Simulation Engineer to join our engineering team. The ideal candidate will have extensive experience with electromagnetic compatibility (EMC) simulations, proficiency in using Ansys simulation tools, and a strong background in the design and analysis of electronic systems. Key Responsibilities: Perform EMC simulations to analyze and optimize the performance of electronic systems and components. Use Ansys tools (e.g., HFSS, SIwave, Maxwell) for electromagnetic field simulation and analysis. Develop and validate simulation models to predict electromagnetic interference (EMI) and ensure compliance with EMC standards. Work closely with hardware design teams to recommend design improvements based on simulation results. Analyze radiated and conducted emissions, susceptibility, and shielding effectiveness. Provide technical expertise in EMC testing and support troubleshooting of EMC-related issues. Document simulation methodologies, results, and provide clear recommendations to cross-functional teams. Stay updated on the latest advancements in EMC simulation tools and standards. Qualifications: PhD / Masters degree in Electrical Engineering, Electronics, RF or related fields. 4+ years of experience in EMC simulation and analysis. Proven expertise in Ansys tools like HFSS, SIwave, Maxwell, or other related simulation software. Knowledge of other simulation tools like CST Studio Suite, COMSOL, or similar is advantageous. Strong understanding of electromagnetic field theory and EMC standards (e.g., IEC, MIL-STD). Experience with PCB layout design and analysis for EMC compliance. Knowledge of EMI mitigation techniques, such as grounding, filtering, and shielding. Familiarity with EMC testing setups and equipment is a plus. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities.