Job description We have requirement of qualified engineers for field installation and maintenance for our ongoing Petrol Station Retail Automation Project. We would like to appoint engineers at following location. Jorhat, Assam: 1. Project handling and management. Coordination with contractor and higher management. 2. Installation and Commissioning of Automation System at Petrol Stations. 3. Project maintenance and support. 4. Maintain project timeline, plan and document progress of project. 5. Configuration and integration of forecourt devices with automation system. 6. Provide support to client over phone call, emails. Ability to diagnose and resolve problems. 7. Excellent written and verbal Communication Skills in Hindi and regional language. 8. Good knowledge of electronics and computer network systems. 9. Site visit for installation and problem resolution around 150 km(not limited) of posting location. Key Skills: Good problem-solving skill in electronics. Must know functionality of multi-meter must have good knowledge in computer and networking. 1.Knowledge of Computers operation and office software. 2.Knowledge of Basic Electronics tools and Components. 3.Knowledge of Computer Networking. 4.Basic Electrical Knowledge and diagnosis skills. 5.Ready to travel at various client sites. 6. ITI or Diploma or any Higher education from Electronic, Electrical or Instrumentation. Job Type: Full-time Pay: ₹18,000.00 - ₹22,000.00 per month Benefits: Cell phone reimbursement Health insurance Paid sick time Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

Job description This position is for a Senior HVAC Engineer who will support design development of HVAC systems by applying applicable HVAC safety, techniques, procedures and criteria to originate reports, drawings, calculations, and more with applicable procedures, local codes, standards, and contract requirements. The engineer will work with mechanical engineers, other disciplines/functions, and/or the client. Major Responsibilities: Support project needs for design, design review, commissioning, testing, code interpretations, and walk downs at project locations, as required. Independently apply the principles of HVAC safety in the development of structures, systems, and components. Prepare reports and studies in resolving open technical issues related to the HVAC systems. Develop and revises Ventilation and Instrumentation Diagrams (V&IDs), formal calculations, equipment data sheets, and specifications to complete the detailed design for HVAC systems, including equipment selection, procurement, and installation. Support safety analyses and hazards analyses. Support developments of HVAC system and equipment cost estimate and schedule. Education and Experience Requirements: B E MECHANICAL, DIPLOMA. Required Knowledge and Skills: Related experience includes, but not limited to, design of HVAC systems, heat transfer and thermodynamic calculations, familiarity with HVAC equipment, site installations, and HVAC equipment specification. Working knowledge of applicable codes and standards (I.e., ASHRAE standards and local/EU standards) relating to regulatory requirements and good engineering practice in HVAC design. Broad knowledge of Mechanical engineering design principles. Experience with Microsoft office programs and other computer programs. Excellent oral and written communication, planning, and organizational skills. Must be able to complete a pre-employment drug screen and background check. Experience : 2-6 years Salary : Based on the technical skills we can fix the salary. Certificate: HVAC is must Or Relate field senior site engineer. Location: Coimbatore, Ganapathy Address: No-40, RVS & Sons Avenue, Alameumangapuram, behind CMS School, Ganapathy, Coimbatore, Tamil Nadu 641006 Interview Start: Monday To Saturday Interview Timing: 10:00 AM To 18:00PM apply fast Job Types: Full-time, Permanent, Fresher Pay: ₹15,000.00 - ₹25,000.00 per month Schedule: Day shift Education: Bachelor's (Preferred) Experience: total work: 1 year (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person LOCATION: COIMBATORE, GANAPATHI NEAR CMS BACKSIDE SCHOOL CONTACT NO: 9789312939,6379607196 WHAT APP NO: 9789312939,6379607196. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Education: Bachelor's (Preferred) Experience: total work: 1 year (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹28,000.00 per month Benefits: Cell phone reimbursement Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Education: Bachelor's (Preferred) Experience: total work: 1 year (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

CANDIDATES WITH EXPERIENCE IN THE ROCKWELL AUTOMATION SHOULD APPLY ONLY S4 Controls and Automation, a leading industrial company, is seeking Senior Electrical Engineers with a minimum of three to four years of experience in engineering, estimation, project execution and commissioning of Programmable Logic Controller (PLC), SCADA and DCS-based control and automation projects. Job Types : Full time, Permanent Pay : ₹45,000 - ₹55,000 per month Benefits: Health Insurance Provident Fund Schedule: Day shift Supplimental Pay : Yearly bonus Location: Survey Park, Kolkata, WB Industry Automation Machinery Manufacturing Employment Type Full-time mmunication skillsIndustry Automation Machinery Manufacturing Employment Type Full-time Edit job description Show more Show less

Key Responsibilities : - Overall 3-6 years experience in network security with at least 3 years in managing PIM/PAM solutions. - Proficiency with management PIM - Experience in working with Windows, Linux, Unix environments. - Hands-on experience in commissioning and Implementation of PIM/PAM solutions and integrating with various management and authentication authorization tools (email, AD, IAM, SIEM) - Experience in automating processes using scripting, configuration (SOAR) tools - Experience in managing policies and exceptions - Experience in packet capture, analysis, and troubleshooting tools - Product knowledge of PIM/PAM solution. - Incident, problem, service request management, change management, configuration management &capacity management of PIM/PAM Setup - Proactively utilize network monitoring tools to isolate events before service degradation occurs - Supporting incident monitoring and incident analysis/response initiatives - Coordinate with users to ensure timely and satisfactory resolution for any trouble tickets, troubleshooting layers 1, 2, and 3 of the OSI Model. - Troubleshooting network, transport, session, presentation and applications layers - Conducting daily performance checks on devices, periodic audits and compliance - Performing immediate troubleshooting as the situation dictates for any network outages as reported by users, sensors, and/or operational personnel - Implement, and maintain network security policy, standards, and procedures. - Deploying and maintaining access and security policies for PIM/PAM solutions. - Maintaining service levels as well as oversight of the day-to-day configuration, administration and monitoring of the network security infrastructure in a 24/7. Show more Show less

Urgent Requirement – E&I Manager (Distillery Experience) | Patel Agri Industries Pvt. Ltd. We are urgently looking for a qualified and experienced professional for the position of Head – Electrical & Instrumentation (E&I) for our ethanol plant at Patel Agri Industries Pvt. Ltd., located in Parwalpur, Bihar Sharif, Nalanda, Bihar. Position: Electrical & Instrumentation (E&I) Manager Experience: Minimum 7–8 years, must have relevant experience in distillery operations Location: Parwalpur, Bihar Sharif, Nalanda, Bihar Joining: Immediate Joiner Preferred Key Requirements: Strong background in Electrical & Instrumentation systems in distilleries or ethanol production units Experience in plant commissioning, operation, automation, and routine maintenance Sound knowledge of industry safety and compliance standards Proven leadership and team management skills Interested candidates are requested to share their updated CVs at hr@patelagri.com . Please circulate this requirement among potential candidates or relevant references. Show more Show less

Company Description SNOVAC is your trusted partner in the world of HVAC, VRF, chiller systems, and innovative commercial kitchen solutions. We provide comprehensive solutions from supply and expert installation to precise commissioning and maintenance. Our specialization includes the design, installation, and maintenance of HVAC and commercial kitchen systems, VRF systems, kitchen ecology, treated fresh air, and chilled water central plant systems. Operating across India and Dubai, UAE, we serve a diverse clientele with tailored solutions. In India, SNOVAC is an authorized channel partner for industry-leading brands Carrier and Toshiba, ensuring quality and reliability. Role Description This is a full-time, on-site role located in Pune for a Technician HVAC. The Technician HVAC will be responsible for equipment maintenance, preventive maintenance, troubleshooting, and repair of HVAC systems. Daily tasks include conducting routine inspections, servicing equipment to ensure optimal functioning, diagnosing issues, and performing necessary repairs to maintain system efficiency and safety. Qualifications Equipment Maintenance, Maintenance, and Maintenance & Repair skills Preventive Maintenance and Troubleshooting skills Strong problem-solving abilities and technical expertise Ability to work independently and manage time effectively Experience in HVAC systems is preferred Certification or diploma in HVAC technology or related field is beneficial Show more Show less

Company Description SNOVAC is a trusted partner in HVAC, VRF, chiller systems, and innovative commercial kitchen solutions. We are dedicated to delivering sustainable solutions that meet your HVAC and kitchen requirements through our comprehensive range of services. From supply and installation to commissioning and maintenance, we excel in designing, installing, and maintaining HVAC and commercial kitchen systems. Our in-house team of experienced professionals ensures each project is executed with precision and care. Operating in India and Dubai, UAE, we cater to a diverse clientele while maintaining high standards of service excellence. Role Description This is a full-time on-site role located in Pune for an HVAC Project Engineer. The HVAC Project Engineer will be responsible for designing, planning, and managing HVAC system projects from inception to completion. The role involves conducting site surveys, preparing technical drawings, coordinating with clients and contractors, overseeing installations, and ensuring timely maintenance and repairs. The engineer will also be tasked with troubleshooting issues and ensuring projects meet industry standards and regulations. Qualifications HVAC Engineering and HVAC Design experience Proficiency in HVAC systems and Computer-Aided Design (CAD) Excellent project management and organizational skills Strong communication and interpersonal skills Ability to work independently and as part of a team Bachelor's degree in Mechanical Engineering or a related field Prior experience in the HVAC industry is a plus Familiarity with industry standards and regulations Show more Show less

Leadership role- to lead a greenfield project in electronics/consumer durables excellent growth trajectory in a high visibility role About Our Client The client is a leading manufacturer of electronic components with a strong presence in domestic and international markets. Job Description Plant Operations & Strategy Lead all aspects of plant operations including production, quality, maintenance, engineering, and supply chain. Develop and implement manufacturing strategies to drive operational excellence and business outcomes. Ensure smooth ramp-up and stabilization of greenfield projects or capacity expansions. SMT/PCB Assembly Management Manage high-volume SMT lines and PCB assembly processes with a focus on yield improvement and defect reduction. Implement best-in-class practices for electronics manufacturing, including reflow soldering, wave soldering, and AOI/X-ray inspections. Collaborate with engineering and quality teams to support NPI and process engineering. Greenfield Project Execution Lead end-to-end greenfield project execution: land acquisition, plant layout, machinery selection, infrastructure development, and commissioning. Work closely with cross-functional teams to ensure timely, within-budget, and compliant execution. Quality Assurance Drive strict adherence to quality standards (ISO/TS/IEC/IPC). Ensure robust QMS implementation and promote a zero-defect, continuous improvement culture. People Leadership Build and lead a high-performance team across production, maintenance, and engineering functions. Drive workforce engagement, skill development, and organizational capability building. Cost, Efficiency & Process Optimization Implement Lean, Six Sigma, and TPM to reduce cost, improve efficiency, and optimize resource utilization. Lead cost-saving initiatives through process innovation and waste elimination. EHS & Compliance Ensure full compliance with all environmental, health, and safety regulations. Build a strong safety culture and drive plant-wide EHS initiatives. The Successful Applicant B.E./B.Tech in Electronics/Electrical/Mechanical or related field. 18+ years of progressive experience in plant operations with a strong focus on SMT/PCB assembly in electronics/consumer durable sectors. Proven track record in greenfield project execution and large-scale plant setup. Deep understanding of electronics manufacturing technologies, tools, and best practices. Exposure to Lean Manufacturing, Six Sigma, Industry 4.0, and automation. Strong leadership, project management, and cross-functional collaboration skills. Experience working with ERP systems (SAP/Oracle) and manufacturing analytics. What's On Offer Work with the MD in a high visibility role, attractive compensation and great work life balance Contact: Aaron Rodgers Quote job ref: JN-062025-6764470 Show more Show less

Company Description SNOVAC is a trusted partner in the world of HVAC, VRF, chiller systems, and innovative commercial kitchen solutions. Dedicated to delivering sustainable solutions, SNOVAC offers a comprehensive range of services from supply and installation to commissioning and maintenance of HVAC and commercial kitchen systems. With extensive expertise in VRF systems, kitchen ecology, treated fresh air, and chilled water central plant systems, SNOVAC builds strong client relationships through its in-house team of professionals. Operating in India and Dubai, UAE, the company adapts to regional needs while maintaining high standards and is an authorized channel partner for leading brands like Carrier and Toshiba in India. Role Description This is a full-time on-site role located in Pune for an HR Manager. The HR Manager will be responsible for overseeing all aspects of human resources practices and processes. This includes recruiting, developing, and implementing HR strategies and initiatives aligned with the overall business strategy. The HR Manager will also be responsible for managing the recruitment and selection process, supporting current and future business needs through the development and engagement of employees, and ensuring legal compliance throughout human resource management. Qualifications Experience in recruiting, staffing, and employee relations Ability to develop HR strategies and initiatives aligned with the overall business strategy Proficiency in performance management, training and development Strong knowledge of HR systems and databases Excellent communication and interpersonal skills Ability to handle multiple tasks and deadlines Degree in Human Resources or related field Experience in the HVAC or commercial kitchen industry is a plus Show more Show less

Position Summary: The State Head – Sales will lead all state‑level sales initiatives for water, submersible, and solar pumps across Bhubaneshwar, Odisha, India. This role is pivotal in driving revenue growth through government and institutional sales (e.g. PM‑KUSUM, MEDA, other government tenders) and building a strong dealer network. Key Responsibilities: - Develop and execute strategic sales plans targeting state government schemes (PM‑KUSUM, MEDA, Jal Jeevan Mission, etc.). - Lead end‑to‑end tendering process: identification, coordination, pricing, & submission. - Build and manage a high‑performing team: Area Managers, Sales Officers, Channel Partners. - Strengthen relationships with government decision‑makers, irrigation departments, and energy development agencies. - Monitor state pump sales (water & solar) performance; achieve/review sales targets & KPIs. - Coordinate with internal teams (logistics, service, marketing, finance) to ensure timely delivery, commissioning, and service. - Identify new sales opportunities: agriculture irrigation, municipal, industrial, and residential sectors. - Conduct regular market and competitor analysis, share insights with national sales/policy teams. - Represent Shakti Pumps at exhibitions, government forums, and industry events. Essential Qualifications & Experience: - Bachelor's in Engineering, Agriculture, Business or related field (Master’s preferred). - 10+ years of proven sales leadership in pumps or solar‑energy equipment. - Strong understanding of water‑pumping technologies (submersible, centrifugal, solar). - Demonstrated success in government/institutional sales; hands‑on with tenders, LOAs, and bid management. - Excellent network within state govt agencies, irrigation boards, development authorities. - Proven experience managing teams and channel development. - Strong skills in negotiation, forecasting, market analysis, and strategic planning. Show more Show less

Role - Devops Admin Skill -Microservices Fundamentals Linux Shell Scripting Database Web Server and LB Problem-solving and Debugging Logging and Monitoring Education - BE/BTECH/MCA Location - Kolkata Experience - 2-4 yr JD: 1 Commissioning of Non-Prod & Prod Environments 2 Installation & Configuration of Servers and Application Software 3 Setup of Deployment Pipelines & Supporting tools 4 Training junior resources, documentation publishing and guidance to team 5 Ensuring uninterrupted operations in PROD & Non-Prod environments 6 Troubleshooting and resolution of issues with the given TAT 7 Version Control, Logging, Monitoring Show more Show less

Electrical testing and commissioning engineer and specialist in electrical substation work like CT, PT, Circuit breaker, Relay, Transformer etc. Job Type: Full-time Pay: ₹15,000.00 - ₹35,000.00 per month Benefits: Health insurance Provident Fund Supplemental Pay: Yearly bonus Ability to commute/relocate: Kolkata, West Bengal: Reliably commute or willing to relocate with an employer-provided relocation package (Required) Application Question(s): Are you currently enrolled in or pursuing any full-time or part-time undergraduate (UG) or postgraduate (PG) degree/course (including B.Tech)? Location: Kolkata, West Bengal (Preferred) Willingness to travel: 100% (Preferred) Work Location: In person

Job description We have requirement of qualified engineers for field installation and maintenance for our ongoing Petrol Station Retail Automation Project. We would like to appoint engineers at following location. Anantapur, Andhra Pradesh: 1. Project handling and management. Coordination with contractor and higher management. 2. Installation and Commissioning of Automation System at Petrol Stations. 3. Project maintenance and support. 4. Maintain project timeline, plan and document progress of project. 5. Configuration and integration of forecourt devices with automation system. 6. Provide support to client over phone call, emails. Ability to diagnose and resolve problems. 7. Excellent written and verbal Communication Skills in Hindi and regional language. 8. Good knowledge of electronics and computer network systems. 9. Site visit for installation and problem resolution around 150 km(not limited) of posting location. Key Skills: Good problem-solving skill in electronics. Must know functionality of multi-meter must have good knowledge in computer and networking. 1.Knowledge of Computers operation and office software. 2.Knowledge of Basic Electronics tools and Components. 3.Knowledge of Computer Networking. 4.Basic Electrical Knowledge and diagnosis skills. 5.Ready to travel at various client sites. 6. ITI or Diploma or any Higher education from Electronic, Electrical or Instrumentation. Job Type: Full-time Pay: ₹18,000.00 - ₹22,000.00 per month Benefits: Cell phone reimbursement Health insurance Paid sick time Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

A renowned company engaged in manufacturing of DUCTS and catering to HVAC Industry for the last two decades is looking urgently for a MAINTENANCE TECHNICIAN for its Manufacturing Plant at Pardi, District Valsad, Gujarat. Job Description Oversee the Mechanical and Electrical systems of a Duct Manufacturing plant, planned and preventive maintenance of industrial equipment used in manufacturing. Duties & Responsibilities Plan and coordinate all maintenance activities viz. routine, periodic and preventive maintenance Establish and implement a maintenance strategy and schedule supported by all functions thereby ensuring availability of lines plant to ensure optimum utilization of resources. Routine Maintenance of existing Plant equipment, troubleshoot issues, and make on-site repairs to ensure equipment availability at its full capacity for the production Support installation/modification, commissioning of new equipment and systems, and up-gradation of technologies, Responsible for break-down rectification in time and corrective action for the Non-Occurrence Responsible for maintaining and procurement of critical and regular spares as per equipment specification Lead the Operations and Maintenance team in the testing, monitoring, installation and troubleshooting of electricity transmission or distribution equipment, auxiliaries, energy storage, control systems, substations, DG Set, Electrical Panel, Air Compressor and RO Plant Maintenance Maintenance of existing plant buildings, and other service facilities, including plumbing work, painting, flooring repair and upkeep, electrical repairs and heating and air conditioning system maintenance. Ensure work place safety and effective communication of Safety, Health and Environment to all team members. . Qualification Diploma/Degree in Mechanical or Electrical Engineering Experience: 4-8 years hands on maintenance experience and troubleshooting of production equipment in a manufacturing plant. Skills Required Leadership capability. Good Interpersonal Skills. Team Work Time Management. Problem Solving Skills. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹20,000.00 per month Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

A renowned company engaged in manufacturing of DUCTS and catering to HVAC Industry for the last two decades is looking urgently for a MAINTENANCE TECHNICIAN for its Manufacturing Plant at Pardi in Gujarat. Job Description Oversee the Mechanical and Electrical systems of a Duct Manufacturing plant, planned and preventive maintenance of industrial equipment used in manufacturing. Duties & Responsibilities Plan and coordinate all maintenance activities viz. routine, periodic and preventive maintenance Establish and implement a maintenance strategy and schedule supported by all functions thereby ensuring availability of lines plant to ensure optimum utilization of resources. Routine Maintenance of existing Plant equipment, troubleshoot issues, and make on-site repairs to ensure equipment availability at its full capacity for the production Support installation/modification, commissioning of new equipment and systems, and up-gradation of technologies, Responsible for break-down rectification in time and corrective action for the Non-Occurrence Responsible for maintaining and procurement of critical and regular spares as per equipment specification Lead the Operations and Maintenance team in the testing, monitoring, installation and troubleshooting of electricity transmission or distribution equipment, auxiliaries, energy storage, control systems, substations, DG Set, Electrical Panel, Air Compressor and RO Plant Maintenance Maintenance of existing plant buildings, and other service facilities, including plumbing work, painting, flooring repair and upkeep, electrical repairs and heating and air conditioning system maintenance. Ensure work place safety and effective communication of Safety, Health and Environment to all team members. . Qualification Diploma/Degree in Mechanical or Electrical Engineering Experience: 3-5 years hands on maintenance experience and troubleshooting of production equipment in a manufacturing plant. Skills Required Leadership capability. Good Interpersonal Skills. Team Work Time Management. Problem Solving Skills. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹20,000.00 per month Benefits: Cell phone reimbursement Internet reimbursement Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

About Kennametal With over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace and defense, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day approximately 8,700 employees are helping customers in nearly 100 countries stay competitive. Kennametal generated $2.1 billion in revenues in fiscal 2023. Learn more at www.kennametal.com . Follow @Kennametal: Twitter, Instagram, Facebook, LinkedIn and YouTube. Job Title: Junior Analyst – Manufacturing Job Summary Project Execution : CNC Machines - Assembly & Testing, Application Engineering – Job prove out & Commissioning Key Job Responsibilities Will be responsible for machine assembly, testing & component prove out. Will be responsible for machine commissioning & component prove out at Customer site. Interface for project execution with cross functional teams – Sales, Design, SCM, Inspection, Electrical & Logistics Ensure safety compliance at workplace. Productivity Improvements & participation in lean projects, initiatives Education , Work Experience, Skills, Certificates ☐High School ☐ Associates/Technical ☒ Bachelor’s Degree ☐Master’s Degree ☐ PhD Years of Relevant Work Experience Required: 3-5 Years Preferred Areas Of Education, Certifications, And Skills B.E. – Mechanical, 2 to 5 years’ experience in machine tool industry, preferably in VTL (Vertical Turning & Milling Machines) / SPMs Special Purpose Machines) / HMCs (Horizontal Machining Centers) / VMCs ( Vertical Machining Centers) Should have involved in machine building & installation at Customer site (preferred) Should have good knowledge in Manufacturing Process of CNC machines, hands on experience in CNC programming & component prove out, cycle time establishing & trouble shooting Should have exposure to Lean Manufacturing Systems, Quality Management Systems Should have good knowledge & exposure to Environmental Health & Safety compliances & practices Skills – Technical, analyze drawings, Multi-tasking, Analytical, Soft skills – data collation & analysis, presentations Required Licenses & Certificates Engineering Certificate, Driving License, Indian Passport, Aadhar Card, PAN Card Equal Opportunity Employer Show more Show less

DEXTRA INDIA (MNC) is hiring for After Sales Service Engineer who will be based at Chennai location (to be more specific south (Chennai) – Industrial Estate Guindy ) and travel to site location to provide below mentioned services. Qualification: Diploma/ BE/B tech - Mech/Civil Experience Required : 2- 8 years Job Summary Reporting to the Line manager, you will be responsible for the site machine maintenance with technicians as subordinates. You will be supervising and controlling all activities, resources and expenses related to the maintenance in your region to ensure safe and efficient production. Essential Duties And Responsibilities (others May Be Assigned) The ideal candidate will be responsible for performing PLC programming and troubleshooting, configuring VFD parameters, and executing electrical panel wiring and modifications. They should be skilled in identifying and resolving control circuit faults, reading electrical diagrams, and repairing or replacing components like contactors, relays, and switches. The role also requires providing remote troubleshooting support, understanding mechanical systems, and working with hydraulic and pneumatic components. Candidates must be willing to travel extensively and manage maintenance tasks independently at customer sites. Planning and Implementation of Preventive Maintenance of all machines of your respective region. Machine breakdown handling Correction of mechanical, electrical, hydraulic & pneumatic problem of all machines. Ensuring that machinery, systems, and equipment run optimally with minimal downtime. Conducting and overseeing maintenance audits Diagnosing faults Training people in equipment operating and maintenance procedures. Supervising technical staff Maintenance reports preparation & upkeeping maintenance documents & record in system. Machine commissioning report to be circulated. Company Website : www.dextragroup.com Candidates who are interested can forward their updated resume to gdeshmukhdextragroup.com Show more Show less

Business Title: Project Manager Region: APAC Country What you will do: In this role you will be responsible for project execution across multiple projects within our portfolio. You will coordinate, plan and manage the entire execution phase. This will include liasing with key stakeholders, being accountable for safety, time, cost, quality & risk management in a complex environment. How You Will Do It Ensure all projects are delivery in line with EH&S goals & objectives. Manage resourcing plans, location resource sharing and recruiting activities to ensure successful delivery. Ensures the scope of works / statement of work for assigned installation projects align with the customers specified requirements. This includes subcontractor and or vendors works packages. Manages integrated teams through the design, manufacturing, installation, and commissioning phases Identifies and assigns tasks for projects, develops a baseline schedule, and budget for the projects. Identifies risks and contingency plans both at the outset of the project and throughout its phases. Manages the financial budgets to ensure the projects are delivered in line with financial targets. Performs supervisory duties, which include but are not limited to, coaching, developing, and providing feedback to Project Installation Specialists regarding their performance with assigned projects by the Project Manager, if applicable. Establishes and implements communication processes for project reporting internally and externally including project status, risks and issues. Manages to establish baseline plans and goals. Ensures that problems are resolved in a manner that satisfies the project stakeholder and does not compromise major goals of the installation project. Co-ordinates with vendors and suppliers as needed with the support and involvement of the procurement team and sourcing board. Ensures commercial contractual compliance with the agreed terms of sale, managing the resolution of any issues with stakeholders. Fosters and maintains an overall high level of Customer Satisfaction with Microsoft, communicating project progress regularly to our customer and internal stakeholders Managing stakeholders effectively and driving continuous improvement across the value chain Conducts regular project reviews and provides written feedback to team members regarding their performance on the project (direct and sub-contractor). Performs other duties as assigned. Offers assistance where needed to maintain efficient workflow. Deploying standard methodologies for the delivery and control of projects. Undertaking detailed planning and scheduling activities, including resource management (internal and sub-contractors). What Are We Looking For High level of project management experience and working within complex environments is preferred, Proven experience in project management including budget ownership/management, resource allocation, scheduling, forecasting and planning. Strong understanding of construction management methodology & principles Strong stakeholder engagement and management skills A high level of organisational and time management skills An ability to work effectively as part of a team or independently An ability to be flexible to adapt to ever changing environments Tertiary or post trade qualifications in Project Management or engineering or a related discipline or demonstrate equivalent level of experience (preferred) Demonstrated ability to lead and influence others Strong hands on in the areas of BMS, Security and HVAC engineering experience. Previous exposure to the management of multiple projects. Be able to adapt, develop through digital transformation. Competent computer skills in MS Word, Excel, Project, Visio. BIM and AutoCAD skills would be an advantage to the applicant. Standardizing of the deliverables including software, points list, documentation etc. Keep up to date with the technical aspects of the job and be willing to undertake training from time to time as needed. Diversity & Inclusion Our dedication to diversity and inclusion starts with our values. We lead with integrity and purpose, focusing on the future and aligning with our customers’ vision for success. Our High-Performance Culture ensures that we have the best talent that is highly engaged and eager to innovate. Our D&I mission elevates each employee ’ s responsibility to contribute to our culture. It ’ s through these contributions that we ’ ll drive the mindsets and behaviors we need to power our customers ’ missions. You have the power. You have the voice. You have the culture in your hands. Show more Show less

Job Role : L3 ACI Cisco Consulting Engineer Location : Hyderabad Experience : 5 to 7 Years Job Description Ability to manage multiple priorities in a fast-paced environment. Installing, configuring, and supporting Cisco Routers and Switches. Deliver expert-level support for Cisco ACI infrastructure, including troubleshooting, configuration, and optimization. Engage in proactive monitoring and maintenance of ACI environments to ensure optimal performance and reliability. Basis Understanding of ACI is Must for L2. Good Knowledge of ACI is required for L3. Updating Network equipment to the latest firmware releases. Replacing faulting network hardware components when required. Reporting network status to key stakeholders. Strong knowledge in Routing and Switching technology such as BGP, OSPF, VPC, Multicast, RSTP, MSTP, NAT, PBR, FHRP Knowledge in WAN technology such as MPLS, IPSEC, GRE, VPN, DMVPN. Significant practical experience in troubleshooting connectivity issues across firewall/Load Balancer or proxy Excellent communication and co-ordination skills within technology community. Excellent problem analysis and solving skill applying creativity, innovation and thinking out of the box approach when dealing with challenges. Able to work under high pressure in a challenging environment. Good to have knowledge in Cisco SDWAN solution (Viptela) Routing- BGP, OSPF and Static Understand how MPLS works Working level understanding of IPSEC, GRE, GETVPN Indepth exposure on Cisco nexus 9K family from installation, commissioning, configuration (Mandatory) Switching- VPC,FHRP,STP,LACP. Good to have knowledge in Cisco SDWAN solution (Viptela) (ref:hirist.tech) Show more Show less

Responsibilities Key Responsibilities: Lead commissioning of GIS/AIS bays, SCADA, relay panels, metering & FOTE systems Supervise third-party test agencies and interface with OEMs and state utilities Ensure compliance with CEA, CBIP, IE rules, and power utility specifications Coordinate grid synchronisation, approvals, and documentation Ideal Candidate Profile B.E./B.Tech in Electrical Engineering 12+ years’ experience in HV/EHV substation commissioning (minimum three 400 kV projects) Expertise in SCADA, protection relays (Siemens, ABB, GE), and grid compliance Strong leadership, coordination, and documentation skills Willing to work in remote project locations Preferred Solar evacuation experience Exposure to GIS/hybrid switchgear systems Familiar with SIPROTEC, REL Series, MiCOM relays Show more Show less

Responsibilities Protection Relay Testing Equipment Testing (CT, PT, CB) Troubleshooting & Documentation Compliance with Safety Standards Show more Show less

Why Join Sparsa Digital? At Sparsa Digital, we are one of India’s leading digital signage companies, with 11+ years of experience and continuous growth. We are present in 180+ cities, managing 25,000+ digital screens and serving 250+ top brands. Our team of 250+ professionals ensures seamless digital experiences across industries. If you’re looking for a stable, growing company with exciting career opportunities, join us today! Job Summary: We are seeking an experienced professional with 5+ years of hands-on experience in the installation, operation, and maintenance of outdoor LED display systems. The ideal candidate will lead site installations, manage teams and subcontractors, and ensure the reliable performance of LED signage projects from deployment to post-install support. Responsibilities: Installation & Commissioning • Lead the installation of large-format outdoor LED screens, including structural mounting, power supply, and system integration. • Conduct site surveys, interpret technical drawings, and guide junior technicians during on-site execution. • Configure and calibrate LED controllers (NovaStar, Colorlight, etc.) and content management systems. • Ensure compliance with safety standards and local electrical codes during all installations. Maintenance & Technical Support • Perform regular inspections and preventive maintenance of installed LED systems. • Diagnose and resolve issues related to power, control systems, display modules, and content playback. • Document service logs, maintenance checklists, and hardware replacement history. Project Oversight & Client Interaction • Coordinate with project managers, suppliers, and structural teams for seamless installation. • Manage on-site resources, timelines, and reporting of project progress. • Serve as a technical point of contact for clients during and after project delivery. • Ensure project documentation (drawings, technical specs, installation reports) is completed and archived properly. Qualifications & Experience: • Education: Diploma or Bachelor's Degree in Electrical, Electronics, or related field. • Experience: Minimum 5 years in LED installation, digital signage, AV systems, or electrical fieldwork. • Technical Proficiency: o Deep knowledge of LED display systems (SMD/DIP, cabinet types, pitch levels). o Hands-on experience with LED control systems (NovaStar, Linsn, Colorlight). o Strong grasp of power distribution, load calculation, and electrical safety. o Familiarity with networking basics (LAN, Wi-Fi) for remote management and diagnostics. • Tools & Certifications: o Proficient with power tools, multimeters, and safety equipment. o Certifications in Working at Heights, Electrical Safety, or similar (preferred) Core Competencies: • Leadership and team supervision on-site. • Strong communication skills for client and internal coordination. • Time and resource management. • Analytical and problem-solving ability. • Commitment to quality and safety. Additional Requirements: • Willingness to travel to project sites across regions. • Ability to work in outdoor conditions, at heights, and during non-standard hours if needed. • Valid driver’s license preferred.

job title: Site engineer for Biomass Manufacturing Plant Location: palwal haryana Type: Full-Time About Us: We are a growing biomass manufacturing company focused on sustainable energy solutions. Currently in an expansion phase, we are adding new machinery and scaling up production capacity. We’re seeking a qualified and dedicated Site Engineer to oversee plant operations, ensure smooth implementation of upgrades, and support our mission to build a robust and efficient manufacturing system. Key Responsibilities: • Supervise day-to-day plant operations, ensuring efficiency, safety, and compliance. • Lead the installation, commissioning, and integration of new machinery. • Coordinate with suppliers, contractors, and internal teams during expansion. • Monitor and optimize production processes and equipment performance. • Ensure adherence to environmental and safety regulations. • Troubleshoot technical issues and implement preventive maintenance plans. • Contribute to continuous improvement and innovation in biomass processing. Requirements: • Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering (or equivalent). • Proven experience in manufacturing or plant engineering (biomass or energy sector preferred). • Strong technical and project management skills. • Excellent problem-solving abilities and attention to detail. • Commitment to safety, quality, and sustainability. What We Offer: • Opportunity to play a key role in a high-growth, eco-focused business. • Collaborative work culture with potential for future leadership roles. • Competitive compensation based on experience.

Job Summary: We are seeking a skilled and proactive Electrical Engineer/Service Engineer to oversee the installation, maintenance, and repair of electrical systems and equipment. The role involves both technical and customer service responsibilities, ensuring optimal system performance and client satisfaction. Key Responsibilities: Installation & Commissioning: Install, configure, and commission electrical systems, machinery, and control panels. Perform site inspections to ensure compliance with project specifications. Maintenance & Repair: Diagnose and troubleshoot electrical issues in equipment and systems. Conduct preventive maintenance to ensure optimal equipment performance. Testing & Calibration: Perform system tests and calibrations to verify system functionality. Document test results and maintain records. Customer Support: Provide technical support to clients during and post-installation. Train clients on system usage and best practices. Documentation & Reporting: Prepare technical reports, service logs, and project documentation. Maintain accurate records of service tasks and customer interactions. Compliance: Ensure adherence to safety standards, regulatory requirements, and company policies. Collaborate with teams to promote continuous improvement in processes and systems. Qualifications Education: Bachelor’s degree in Electrical Engineering or a related field. Experience:2-5 years of relevant experience in electrical systems installation, maintenance, or repair. Skills & Competencies: Strong understanding of electrical schematics, circuit design, and troubleshooting techniques. Hands-on experience with tools, diagnostic equipment, and software used in electrical engineering. Excellent problem-solving skills with a customer-focused mindset. Effective communication and interpersonal skills. Ability to work independently and as part of a team. Certifications (Preferred):Relevant certifications such as IEEE, IEC standards familiarity, or similar. Other Requirements:Willingness to travel to client sites as needed. Physical ability to work in various environments, including confined spaces and at heights. Work EnvironmentCombination of office, on-site, and client-location work. May involve extended hours, especially during installations or emergency repairs. Interested candidates espacilly locals can share their resume at gitanjali.parmar@skylineindustries.in

Key Responsibilities: Responsible for the repair, maintenance and improvement to all tooling dies, and fittings for press tools, Support new tooling for new product introductions to ensure the robustness of product builds. Work under general supervision, reviewed at project milestones and/or on completion by Team leader. Ø Repair and maintain press tools, Jigs and fixtures Ø Routine servicing and regrinding of tools Ø Attend breakdowns, identify fault and problem solve at the press with minimal downtime to aid production Ø Evaluate each job and determine if it can be repaired in press or must be removed to Tool Room for essential maintenance and repair work Ø Estimate length of time required to complete a job and likely consequences of failure to complete work within required timescales Ø Identify and escalate any activity that has the potential to cause harm or damage Ø Report breakdown root causes, equipment faults and concerns to management Ø Ensure all work is undertaken to a high quality standard and adheres to all quality standard regulations Ø Ensure company targets are met in respect of quality of parts produced Ø Identify spares requirements and log usage Ø Operate lifting equipment Ø Support new project tooling from commissioning stages through to start of production Ø Assist in tooling buyoffs and trials Ø Manufacture new tooling and ancillary spares to support production activity and customer deadlines Ø Document and update die history and other work records Ø Carry out Planned Preventative Maintenance, engineering level changes to tools and modifications Ø Test and confirm electrical and hydraulic/pneumatic operation of tools before return to production Ø Maintain the highest standards of workmanship at all times Ø Record all relevant data in relation to tooling and record on the Tool Room database Ø Be actively involved in improvement activities to support the achievement of departmental and company objectives Ø Ensure risk assessments are available, read and understood for each activity undertaken Ø Understand and operate within basic cost/budget measures for tooling Ø Work within 5S (Sort, Set In Order, Shine, Standardize, Sustain) methodology to maintain workplace to a high standard Ø Ensure all personal protective equipment is identified, always available, correctly used and all associated problems are reported to Manager Ø Perform root cause analysis and resolve problems Independently determine approach and assigned tasks