12 Combined Cycle Jobs

Dear Candidate, We have an Urgent job opening for one of our well known client Designation-Civil Engineer with Site Experience Qualification- B.E Civil Years of experience- 10 to 15 years Location- Abu Dhabhi Responsibilities:- Candidate must have good experiene in Site ,Combined cycle and Gas turbine. FTC- It will be a 1 year of contract and further extendable, Candidate will be directly on client payroll Other Facilities:- Bachelour accomodation and local transportation will be provided by the client and food is included in the salary Interested candidate please share their updated resume on below Email ID: recruiter7@kushalengineers.com Tel no:- 022-41556155 Mobile no:-8828265944

Layout Engineering: Should be able to visualize and independently develop Equipment Layouts and Building General Arrangement. Should have sufficient knowledge in Indian and International Codes and Standards (Design/Dimensional/Material Standards) Required Candidate profile Exp of working on 3D Plant Design software like S3D/PDMS/E3D/PDS exp in thermal - combined cycle power plant projects must

Should have minimum 10 Yrs of experience with Diploma qualification. He should have worked for 6 Years in Thermal Power Plant/ Captive Power Plant/ Combined Cycle Power Plant with Mechanical background.

Candidate should have experience of 10 Yrs minimum. He should have worked either in Thermal Power Plant/ Captive Power Plant/ Combined Cycle Power Plant.

Looking for challenging roleIf you really want to make a difference - make it with us Siemens Energy is focused on helping customers navigate the worlds most pressing energy problems. As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees. Your new role- challenging and future-oriented Carry out Basic and Detail Engineering of Combine cycle power plants and coal based power plants (Balance of Plant systems) Preparation of Heat Balance diagram and performance curves based on customer requirements. Develop Water balance diagrams and sizing calculation for cooling water system (both once through and with cooling tower) Develop System P&IDs and System Descriptions for Water Steam Cycle (Steam, reheat, condensate, feed water systems), HRSG systems, Cooling Water System and Auxiliary cooling Water Systems. Perform sizing calculation of components e.g. Feedwater Pump, Condensate Pumps, Circulating Water Pumps, Heat Ex changers, Tanks and Pressure vessels, hybrid cooling towers, air cooled condensers etc. Develop Design Data sheets of Control Valves, Bypass Valves, Safety Relief Valves and Flow elements Preparation of Component RFQ such as Feedwater Pumps, Condensate Extraction Pumps, Circulating Water Pumps, Compressed Air System, Tanks and Heat Exchanger Bid Evaluation and post order engineering of above referred components Conversant with International codes e.g. ASME, API, HIS, ISO, AWWA etc. Preparation of Fups and HMIs (plant logics) is added advantage. We dont need superheroes, just super minds B.E. / B. Tech/ M. Tech. in Mechanical Engineering with around 15 years of relevant work experience. Conversant with Combined cycle power plant (CCPP) process and coal based power plants. Knowledge of HRSG, Steam & Water cycle and Cooling Water cycle Knowledge of Thermodynamics, Fluid mechanics and Heat and mass transfer Knowledge of international codes and standards. Weve got quite a lot to offer. How about you This role is based at Site ( Gurgaon ). Youll also get to visit other locations in India and beyond, so youll need to go where this journey takes you. In return, youll get the chance to work with teams impacting entire cities, countries- and the shape of things to come. Were Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

Mega Walk-in Drive on 5th July 2025 (Saturday) @ Chennai Quest Global Engineering Services Pvt Ltd, 11th floor, IndiQube Alpine, behind Ekkattuthangal Metro Station, Labour Colony, SIDCO Industrial Estate, Guindy, Chennai, Tamil Nadu 600032 Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 5th July 2025 (Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 21st June 2025 (Saturday) @ Chennai Interview Venue: Quest Global Engineering Services Pvt Ltd, 6th floor, IndiQube Alpine, behind Ekkattuthangal Metro Station, Labour Colony, SIDCO Industrial Estate, Guindy, Chennai, Tamil Nadu 600032 Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 21st & 22nd June 2025 (Saturday & Sunday) @ Hyderabad Interview Venue: QuEST Global Engineering Services Private limitedQGESPL Tower 8 , Fourth Floor, GAR Corp, IT-ITES SEZ Survey No. 89, Kokapet Village Gandipet Mandal Rangareddy District Telangana-500075 Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in Drive on 21st June 2025(Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Role & responsibilities 1. The Shift Operator Engineer has responsibilities of conducting periodic walk-through throughout the plant monitoring and documenting operating plant data and advice Control Room Engineer of any problems requiring immediate corrective actions 2. He will also assist under the direction of Shift Manager in restoring or isolating various plant systems in a safe manner and within the operating constraints procedures. 3. Coordinate field operational functions closely with the Control Room Engineer and Shift Manager. 4. Periodically walk-through Plant and monitor/document status of all plant systems. 5. Responding to alarms or abnormalities by reporting to Control Room Engineer or Shift Manager and taking appropriate actions as required. 6. Take directions from Shift Manager in isolation and restoration of plant equipment and systems as per operational procedures. 7. Assist Control Room Engineer in a manner that the plant operates safely and efficiently as per approved procedures. 8. Perform work in strict compliance with the Environmental Sustainability, Health and Safety Management System Rules and operating procedures and routines. 9. Ensure that Plant assets are properly maintained and functionally available and preserved during shutdown. Preferred candidate profile - Qualification & Experience: BE/ B. Tech (Mechanical & Electrical) with 2 to 5 years of experience. [preference to be given to BOE Qualified & NPTI] - Ready for fieldwork

Mega Walk-in Drive on 14th June 2025(Saturday) @ Bangalore Job Description : Roles & Responsibilities: Should have 5+ experience in Basic and Detail Engineering experience from Thermal Power Plant, Combined Cycle and Supercritical Power plants with extensive experience in Main Plant accessories Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal Should have extensive experience in P&ID preparation and review with associated Device summary settings for Turbine and Generator Accessories Systems. (e.g. Water, Fuel, Oil , Air, Cooling Systems). Should able to handle the Product Cost out activities per project requirement P&ID and Device Summary (Instrumentation) Creation and Modification in AVEVA DIAGRAM and AVEVA Engineering Tool, AutoCADD toll added advantage Should have experience in Plant layout drawings such as General Arrangement Drawing, Technical Specification, Data Sheet & Technical Bid Evaluation and Commissioning spare parts list Should have very good experience in Piping, Tubing and all associated fittings, Valves and also Plant layout drawings (GA, Plot Plan) Should have experience in developing new Arrangement drawings & BOM in line with P&ID Schematics Should have experience in preparation of Ordering Specification/Functional Specifications Modification Kit Should have very good experience in Preparing FMI (Field Modification Instruction manual). Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of the each task. Planning the tasks, executing and delivering on time, with cost effective and quality. Should have excellent Coordination skills with all Cross-Functional Teams such as Customers (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical Engineering, Energy Engineering experience from Thermal/Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com