10 Cispr Jobs

You should possess a thorough understanding of PCB engineering, component engineering, EMI/EMC testing, and circuit simulation. Your hands-on experience should include hardware architecture design, feature & performance specifications, and 16/32-bit Microcontrollers based designs. Additionally, you should have experience in Linear, SMPS, signal conditioning, and driver circuit design & testing. It is essential to have a good knowledge of ATEX, EC, CISPR, ISO, SAE standards, as well as PCB design guidelines for SI, high-speed design, and EMI/EMC. Your practical experience should cover analog and digital hardware design, circuit simulations using PSpice & LTspice tools. You should be capable of analyzing analog & digital circuits for functionality, performing FMEAs, Stress, Derating, Worst-case & Tolerance analysis. Moreover, you must be able to read and understand mechanical drawings, electrical schematics, PCB layout, and drawings.,

Hi, We are hiring for EMI/EMC Test Engineer for Mysore/Mysuru location. Job title: EMC Testing Engineer Openings: 2-3 Work Location: Mysore/Mysuru and Chennai Division/Department: EMC lab Profile: The EMC Test Engineer is responsible for evaluating, explaining, and completing the test report for intricate customer samples. Follows defined test plans, testing procedures and data sheets for the product under test. Operates and maintains complex test equipment and customer samples. Communicates with customers during setup and operation to ensure proper evaluation. Skills required: strong background in EMC/EMI testing. Knowledge of basic EMC standard like Knowledge of EMC standard like IEC 61000-4 series, IEC 61326, MIL standard, IEC62052-11 series and CISPR series. Knowledge of Emission and Immunity test like Radiated and Conducted emission, ESD, EFT, Surge, Conducted and Radiated Susceptibility test. Exposer of testing in 3M Anechoic chamber. Experience: Minimum 4 years Educational Qualification Required: B.tech/Diploma (E&C/E&E) or M.tech (E&C/E&E). Interested candidates please share your updated resume to nikita.singh@nemko.com or apply here on naukri.com

You should possess a thorough understanding of PCB engineering, component engineering, EMI/EMC testing, and circuit simulation. Your experience should include hands-on involvement in hardware architecture design, feature & performance specifications, as well as 16/32-bit Microcontrollers based designs. Additionally, you should have practical experience in linear, SMPS, signal conditioning, and driver circuit design & testing. A good knowledge of ATEX, EC, CISPR, ISO, SAE standards is required for this role. Familiarity with PCB design guidelines for SI, high-speed design, and EMI/EMC is essential. You should also have practical experience in analog and digital hardware design, as well as circuit simulations using PSpice & LTspice tools. Your responsibilities will include analyzing analog & digital circuits for functionality, performing FMEAs, stress, derating, worst-case & tolerance analysis. It is important that you are able to read and understand mechanical drawings, electrical schematics, PCB layout, and drawings.,

Requirements : - Bachelor of Electrical/ Electronic Engineering Experience required 10 to 15 Years Exposure to applicable testing and certification standards Responsible for performing test of products in accordance with applicable standards. Core tests include but are not limited to: Medical product EMC testing (IEC/ EN 60601-1-2, 3rd or 4th edition), Commercial & Medical products. (61000x-x series,IEC / EN61326, EN55032, 35, 55014, 16, CISPR 11, 14, etc). Test experience in RF, Wireless and Bluetooth Test, FCC testing and requirements are preferable. Test experience MIL standard will be considered as added preference Knowledge on all EMC Basic and product standards Responsible for preparing test plan for products containing different test parameters, relevant test method/standard & requirement / limit / acceptance criteria of each test.

Requirements : - Bachelor of Electrical/ Electronic Engineering Experience required 10 to 15 Years Exposure to applicable testing and certification standards Responsible for performing test of products in accordance with applicable standards. Core tests include but are not limited to: Medical product EMC testing (IEC/ EN 60601-1-2, 3rd or 4th edition), Commercial & Medical products. (61000x-x series,IEC / EN61326, EN55032, 35, 55014, 16, CISPR 11, 14, etc). Test experience in RF, Wireless and Bluetooth Test, FCC testing and requirements are preferable. Test experience MIL standard will be considered as added preference Knowledge on all EMC Basic and product standards Responsible for preparing test plan for products containing different test parameters, relevant test method/standard & requirement / limit / acceptance criteria of each test.

Requirements : - Bachelor of Electrical/ Electronic Engineering Experience required 10 to 15 Years Exposure to applicable testing and certification standards Responsible for performing test of products in accordance with applicable standards. Core tests include but are not limited to: Medical product EMC testing (IEC/ EN 60601-1-2, 3rd or 4th edition), Commercial & Medical products. (61000x-x series,IEC / EN61326, EN55032, 35, 55014, 16, CISPR 11, 14, etc). Test experience in RF, Wireless and Bluetooth Test, FCC testing and requirements are preferable. Test experience MIL standard will be considered as added preference Knowledge on all EMC Basic and product standards Responsible for preparing test plan for products containing different test parameters, relevant test method/standard & requirement / limit / acceptance criteria of each test.

Investigation of electromagnetic emissions from cables or other lines into the mains or other equipment. Analysis of electromagnetic fields emitted by the device into the environment. Compliance with limits for interference emissions according to standards (e. g. EN55032, CISPR 11). Typical tests: ESD (electrostatic discharge): Protection against electrical discharges. Burst/EFT test: Resistance to fast transient interference. Surge test: Immunity to overvoltage s. RF radiation: Resistance to radiofrequency interference. Magnetic field immunity: Tolerance to magnetic fields. -EMC Simulation (responsible for selection and Interviews David Hamann) EMC - electromagnetic compatibility - 1 Eng. Spice Tool (LTspice, PSPICE) Component and system level EMC Engineering Level Basic knowledge of power electronics, e.g. B6 bridge, flyback, DCDC-converter

Role & responsibilities: Candidate should have a comprehensive knowledge of EMI/EMC Testing. Candidate should have worked in the Anechoic chamber for EMI/EMC Testing for CISPR, IEC, ISO Automotive Standards. Knowledge of EMC STANDARDS like CISPR 11,32, 35 and IEC/EN 61000-X-X, FCC, ETSI 301 489-X, FCC Part 15 Subpart B, IEC/EN 60601-1-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, IEC 61000-6-4. Knowledge of quality and technical requirements for ISO 17025 and Quality Management System. Experience in operating RF instruments like EMI Test Receivers, Spectrum Analyzers, Signal Generators, R.F Amplifiers, Power meters, Digital Oscilloscope etc. Should have hands-on experience in validating the test plan, testing and evaluating the test results. Hands on experience in end-to-end Project Steering starting from Test Plan, Test report preparation and Project execution Preferred candidate profile: Bachelor of Engineering - Electronics & Communication/ Electronics & Telecommunication/ Electronics & Instrumentations. Should have Min 3-5 Years in EMI/EMC Testing Experience in working at Anechoic Chambers ISO 17025 Audit and Documentation Interested candidates, please share updated resume to basavaraj.ym@tuvsud.com

Role & responsibilities Electronics Architecture, Design and Development of Circuits / Schematic for multiple PCBs solutions. Technical PCB design skills using eCAD toolset, placement, routing, constraint manager, and library tools Development and creation of Gerber and ODB++ formats. Ensuring Design-to-Cost, Required Robustness an Endurance, Fulfilling EMI/EMC/ESD Requirements Process Maturity; experience with PCB Manufacturing process. Ability to follow internal work products from team members (requirements based on development Process). Customer & Supplier Communication; experience working with different sites across the globe Preferred candidate profile Innovative Opportunity Sensing and driving innovation. Strategic Thinking Envisioning future, creativity and systems thinking. Problem Solving and Solution oriented professional. Passion for innovation Out of box thinking Emotional connect - Ownership & accountability and drive for results. Highly motivated, analytical, self-believer, focusing on core knowledge & innovative thinking

Position: Senior Engineer - EMI/ EMC Key responsibilities: Candidate should have a comprehensive knowledge of EMI/EMC Testing. Candidate should have worked in the Anechoic chamber for EMI/EMC Testing for CISPR, IEC, ISO Automotive Standards. Knowledge of EMC STANDARDS like CISPR 11,32, 35 and IEC/EN 61000-X-X, FCC, ETSI 301 489-X, FCC Part 15 Subpart B, IEC/EN 60601-1-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, IEC 61000-6-4. Knowledge of quality and technical requirements for ISO 17025 and Quality Management System. Experience in operating RF instruments like EMI Test Receivers, Spectrum Analyzers, Signal Generators, R.F Amplifiers, Power meters, Digital Oscilloscope etc. Should have hands-on experience in validating the test plan, testing and evaluating the test results. Hands on experience in end-to-end Project Steering starting from Test Plan, Test report preparation and Project execution Preferred candidate profile: Bachelor of Engineering - Electronics & Communication/ Electronics & Telecommunication/ Electronics & Instrumentations. Should have Min 3-5 Years in EMI/EMC Testing Experience in working at Anechoic Chambers ISO 17025 Audit and Documentation Interested candidates, please share updated resume to basavaraj.ym@tuvsud.com.