5251 Circuit Jobs - Page 28

Experience in sound engineering,debugging wireless communications, like BT audio network Experience with tools like MATLAB, Audacity, Audioweaver,similar tuning tools Experience in the design & development of HW circuits for any audio circuit.

We Are: At Synopsys, we drive the innovations that shape the way we live and connect. Our technology is central to the Era of Pervasive Intelligence, from self-driving cars to learning machines. We lead in chip design, verification, and IP integration, empowering the creation of high-performance silicon chips and software content. Join us to transform the future through continuous technological innovation. Our Silicon Design & Verification business leads the industry in enabling customers to design and verify advanced silicon chips—faster and with more reliability. We develop the next-generation processes and models that optimize chips for power, cost, and performance, shaving months off project schedules for our global clientele. We believe in fostering an inclusive and diverse environment where every voice is valued and innovation thrives. You Are: You are a passionate and experienced Analog/Mixed-Signal (A&MS) Circuit Design Engineer with a track record of excellence in high-speed physical interface development. With a deep foundation in CMOS circuit design, device physics, and nanometer technologies, you thrive on solving complex challenges at the intersection of analog and digital domains. You are energized by working on industry-leading projects and are adept at architecting, designing, and validating advanced circuits such as transmitters, receivers, clocking circuits, equalizers, serializers, de-serializers, and analog front ends. Your expertise allows you to optimize for performance, area, and power, and you are comfortable with layout considerations and parasitic optimizations. You value diversity and inclusion, recognizing the strength that comes from varied perspectives and backgrounds. You are ready to contribute to a culture of innovation, respect, and excellence—helping Synopsys remain at the forefront of the smart everything revolution. What You’ll Be Doing: Designing and developing high-speed analog and mixed-signal full-custom circuit macros, including transmitters, receivers, clocking circuits, equalizers, serializers, de-serializers, and analog front ends for PHY IPs in advanced CMOS technologies (planar and finFET). Analyzing and implementing various analog circuit techniques to optimize dynamic/static power, enhance performance, and reduce silicon area. Collaborating with global teams to define micro-architectures from specifications and create robust simulation environments for design verification. Performing transistor-level circuit design, simulation, and troubleshooting in nanometer processes, with a focus on reliability and manufacturability. Working closely with layout engineers to optimize parasitics, ensure design closure, and address layout-dependent effects. Participating in design reviews, providing technical guidance, and mentoring junior engineers within a high-performing, diverse team. Adopting and developing automation and scripting to streamline design and verification flows, leveraging languages such as Verilog-A and others as needed. The Impact You Will Have: Advance the state-of-the-art in high-speed PHY IP development, contributing directly to next-generation technology in AI, IoT, 5G, and automotive industries. Enable Synopsys customers to achieve faster time-to-market with optimized, reliable, and high-performance silicon solutions. Drive innovation in low-power and high-speed circuit design, helping customers meet stringent power and area targets. Enhance Synopsys’ reputation as a global leader in silicon design and verification through technical excellence and customer success. Mentor and elevate the skills of team members, fostering a collaborative and growth-oriented culture. Contribute to a diverse and inclusive workplace, ensuring a wide range of perspectives and ideas inform our solutions. What You’ll Need: BE + 5 years or MTech + 4 years of relevant experience in Electrical/Electronics/VLSI Engineering or closely related field. Strong fundamentals in CMOS circuit design, device physics, and sub-micron/nanometer methodologies. Hands-on experience in analog transistor-level circuit design for high-speed applications (Multi-Gbps, PAM4 SERDES architectures). Proficiency in SPICE simulations, reliability analysis, and optimizing for layout parasitics. Ability to micro-architect circuits from specifications, set up verification environments, and debug complex analog/mixed-signal circuits. Basic proficiency with automation/scripting languages and familiarity with Verilog-A is a plus. Experience collaborating with cross-site, multicultural teams and strong documentation skills. Who You Are: Innovative thinker with a problem-solving mindset and a passion for continuous learning. Collaborative team player who values diversity, inclusion, and open communication. Detail-oriented, quality-focused, and committed to delivering results on time. Strong interpersonal and mentoring skills, able to guide and support less experienced team members. Adaptable and resilient, comfortable working in a fast-paced, dynamic environment. The Team You’ll Be A Part Of: You will join a dynamic, high-performing team dedicated to the design and development of high-speed physical interfaces for advanced semiconductor products. Our team is composed of talented engineers with deep expertise in analog and mixed-signal design, working collaboratively across multiple sites worldwide. We value innovation, knowledge-sharing, and a culture of mutual respect, enabling every team member to grow and contribute to industry-leading solutions. Rewards and Benefits: We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process.

We are seeking a highly skilled and driven Senior Software Engineer specializing in Java and Azure who is ready to contribute to our cutting-edge projects. The ideal candidate will take ownership of delivering robust, scalable, and reliable backend solutions while collaborating across teams to meet business objectives in a fast-paced, dynamic environment. Responsibilities Analyze user requirements to shape application design Define application objectives and ensure alignment with business goals Troubleshoot production issues and perform root cause analysis Develop and test high-quality software, adhering to industry standards Regularly update JIRA on project progress and task status Debug and resolve complex technical challenges effectively Design and execute scalable Java-based applications and microservices Produce thorough design documentation to support team and stakeholders Recommend application improvements and best practices Continuously seek new technologies and trends to enhance skills and solutions Navigate and manage end-to-end release processes efficiently Requirements 5-8 years of hands-on experience with Java, open-source frameworks like Spring, and multithreaded application development, with added experience in Go Lang Competency in creating and integrating APIs using REST/SOAP and exposure to binary payloads with frameworks such as Thrift or gRPC Working knowledge of object-oriented programming and design patterns (core and enterprise) At least 3 years of experience building and managing microservices and distributed systems at high scale Expertise in resiliency patterns such as throttling, circuit breaker, and bulk heading, including CPU/memory profiling and error handling Skills in monitoring/alerting tools such as Grafana, Kibana, Prometheus, Splunk, or Graphite with the ability to utilize dashboards and logs for debugging Experience with version control systems like GIT and knowledge of monorepos is an advantage Strong communication skills and proven ability to collaborate with cross-functional teams; excellent English communication is essential Nice to have Deep understanding of Java resource optimization, memory management, and caching frameworks Proficient troubleshooting skills for production issues, including root cause analysis Advanced knowledge of Java Multithreading and Microservices architecture Expertise in Java design patterns and best practices Familiarity with tools and processes like Maven, Jenkins, GITLab/GitHub Understanding of security concepts (authentication, authorization, SSL), web service proxies, and secured token exchanges

AVTAAR ELECTRIC HUB PRIVATE LIMITED is looking for Electrician to join our dynamic team and embark on a rewarding career journey Installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reading technical diagrams and blueprints. Performing general electrical maintenance. Inspecting transformers, circuit breakers, and other electrical components. Troubleshooting electrical issues using appropriate testing devices. Repairing and replacing equipment, electrical wiring, and fixtures. Following National Electrical Code state and local building regulations. Performing circuit breaker corrective maintenance. Maintaining good knowledge of heating and air conditioning systems as well as various testing equipment.

Design, develop, and test electronic systems, components, and circuits for use in a wide range of devices and applications. Create technical specifications, schematics, and layout designs using CAD and simulation tools. Troubleshoot and resolve issues in electronic hardware and embedded systems during development and production phases. Collaborate with cross-functional teams including mechanical, software, and quality engineers to integrate electronic systems into final products. Conduct performance testing and validation to ensure compliance with industry standards, safety regulations, and customer requirements.

We are seeking a highly skilled and driven Senior Software Engineer specializing in Java and Azure who is ready to contribute to our cutting-edge projects. The ideal candidate will take ownership of delivering robust, scalable, and reliable backend solutions while collaborating across teams to meet business objectives in a fast-paced, dynamic environment. Responsibilities Analyze user requirements to shape application design Define application objectives and ensure alignment with business goals Troubleshoot production issues and perform root cause analysis Develop and test high-quality software, adhering to industry standards Regularly update JIRA on project progress and task status Debug and resolve complex technical challenges effectively Design and execute scalable Java-based applications and microservices Produce thorough design documentation to support team and stakeholders Recommend application improvements and best practices Continuously seek new technologies and trends to enhance skills and solutions Navigate and manage end-to-end release processes efficiently Requirements 5-8 years of hands-on experience with Java, open-source frameworks like Spring, and multithreaded application development, with added experience in Go Lang Competency in creating and integrating APIs using REST/SOAP and exposure to binary payloads with frameworks such as Thrift or gRPC Working knowledge of object-oriented programming and design patterns (core and enterprise) At least 3 years of experience building and managing microservices and distributed systems at high scale Expertise in resiliency patterns such as throttling, circuit breaker, and bulk heading, including CPU/memory profiling and error handling Skills in monitoring/alerting tools such as Grafana, Kibana, Prometheus, Splunk, or Graphite with the ability to utilize dashboards and logs for debugging Experience with version control systems like GIT and knowledge of monorepos is an advantage Strong communication skills and proven ability to collaborate with cross-functional teams; excellent English communication is essential Nice to have Deep understanding of Java resource optimization, memory management, and caching frameworks Proficient troubleshooting skills for production issues, including root cause analysis Advanced knowledge of Java Multithreading and Microservices architecture Expertise in Java design patterns and best practices Familiarity with tools and processes like Maven, Jenkins, GITLab/GitHub Understanding of security concepts (authentication, authorization, SSL), web service proxies, and secured token exchanges

Able to lead the Rolling Stock Mechanical Design Works under the Rolling Stock Contract. Able to perform the exhaustive review of Rolling Stock mechanical systems including but not limited to Carbody, bogie, brake & pneumatics, coupler, door, air conditioning, gangway, gearbox etc. Have thorough experience in dealing crashworthiness design, bogie dynamics, Carbody & bogie FEA, fire safety management, pneumatics circuit, wheel rail interaction, stainless steel carbody welding and bogie frame welding processes. Have experience to validate the above design aspects with respect to the requirements of corresponding EN, UIC, BS Standards. Demonstrable ability to identify, understand and apply relevant Engineering Standards Capable of engaging effectively with Contractor and Client during design workshops and capable of leading the mechanical design aspects with them. Able to verify the Contractor’s design calculations and test reports Knowledge of statutory approval process for Indian Metros including RDSO trials Can objectively assess and report on the Contractor’s planning and execution of manufacturing, factory tests, trials & systems integration matters Can lead the quality assurance works at the manufacturer’s location during the manufacturing of rolling stock specially carbody shell, bogie frame etc. Has experience of witnessing the Rolling Stock type tests including carbody shell structural test, bogie frame static & fatigue test, EN45545 related fire tests, floor fire barrier test, climate chamber test, brake dynamometer test, coupler tests etc. Able to work under own initiative to produce high quality reports and presentations. Requirements At least 15 years of total professional experience At least 10 years relevant rail/metro experience Previous design (or design review) experience mandatory. General Consultant (or client organisation) experience preferred Excellent (written / verbal) command of English

NVIDIA’s invention of the GPU sparked the growth of the PC gaming market, redefined modern computer graphics, and revolutionized parallel computing. More recently, GPU deep learning ignited modern AI — the next era of computing — with the GPU acting as the brain of computers, robots, and self-driving cars. Today, we are increasingly known as “the AI computing company.” We are actively looking to add the smartest brains to our company and usher in the next wave of computing. NVIDIA Silicon Solutions group is seeking a versatile engineer to be part of a High Speed SERDES IO validation team. You will dive into high-speed interconnects like PCIe, USB3, Ethernet, UFS, etc. - perform bringup, electrical validation, with strong emphasis on stability and efficiency. This position offers the opportunity to have real impact in a dynamic, technology-focused company impacting product lines ranging from artificial intelligence, consumer graphics, self-driving cars, and more What You'll Be Doing Lead the planning and electrical validation of PCIe/Ethernet/USB3/UFS interfaces for NVIDIA GPUs, CPUs, and SOCs. Engage proactively with multi-functional engineering teams, including system architects, mixed-signal design, software/firmware, hardware/software quality assurance, operations, and application engineering to facilitate the design, development, debugging, and release of upcoming products. Drive schedule, tuning guide, customer critical issues and design feedback. Investigate technically complicated HSIO bugs and help drive debug efforts across various teams. Coordinate with logic design, circuit design, board design, simulation, diagnostics, ATE, firmware, driver, and marketing teams to drive the chip into production. Develop new methodologies to improve the HSIO validation process from both quality and effort-efficiency point of view. What We Need To See BS or MS in Electronics Engineering (or equivalent experience) and a minimum of 3 years of proven experience. Excellent knowledge of signal integrity concepts, silicon characteristics, and high-speed/SERDES electrical validation and related tuning. In-depth understanding of PCIe (or similar) protocol and related electrical concepts and hands-on on electrical validation. Good knowledge of lab equipment (DSOs, BERT, Protocol/Logic analyzers). Understanding of firmware/driver structures and their interaction with Hardware. Strong EE fundamentals, scripting languages (Perl, Python) to write direct test/debug programs for stress and failure analysis. Strong project management, problem-solving, collaboration, and interpersonal skills. JR1999344

BU: EDRC (Solar) Position Title: Design Engineer – Electrical(AC) Reports to (Job – Role) : Design Lead Education : Bachelor in Electrical Engineering/EEE or M.Tech(Electrical Engineering Specializations) Experience : 3-5 years, experience in Design and Detailing in solar Power Plant . Objective : The person shall be able to carry out the design and detailed engineering for Solar Power plants like Mini Grid and Mega watt scales plants ,roof top plants . The Design Engineer shall design and review the entire design documents and review drawings for a project or a set of smaller projects including co-ordination with other disciplines viz., Civil ,instrumentation and Mechanical. Design Engineer shall work with a team of draftsman to design the Engineering activities within budget, deliver on time and maintaining a high quality of engineering Key Responsibilities Coordination with Site Team and Client to meet the requirements of design and drawings Preparing BOQ and material with respect to previous projects Interaction with Client for Drawing Approval and Clarification Interaction with Site for Clarification on drawing Interaction with SCM for Clarification on drawing Design of single line diagrams for solar PV plant & substations. Preparation of equipment /earthing / lighting / cable trench layouts for PV plant as well as outdoor substations as per the relevant standards. Preparation of technical specifications Sizing of LT& HT cables, loss calculation, cable schedule Earthing, lighting and lightning protection calculations for PV plant as well as substation as per relevant standards. Review of vendor drawings for Dry/Oil type Transformers, HT/LT panels, UPS, Battery charger and cable GTP. Design of relay protective systems at Solar plant as well as at Substation. Short Circuit Analysis, relay setting & coordination using ETAP software. Cost optimization initiatives. Discussion with vendor and client to resolve technical challenges. Technical Expertise Updated knowledge of Inverters, transformer, cables, UPS, battery & charger, Lighting, ancillaries (FFPH, auxiliary power). Working knowledge & trends in innovation . Knowledge on Transmission Lines and Substations. Knowledge about various IS/IEC standards Operating Network Internally: Contract Team, SCM, Section head, Design engineer, Draftsmen, Site execution team (lead)) Externally: Clients, Vendors, Consultants

Job Overview We are seeking a highly skilled and experienced Lead Electro-Mechanical Engineer to join our dynamic engineering team. This role demands a strong background in medium voltage distribution automation and substation switchgear product design and development . The ideal candidate will bring deep technical expertise in protection and switchgear products , with a proven track record of driving innovation and delivering high-performance engineering solutions for modern power systems. Education: M.Tech – Power systems / B.Tech – Electrical engineering or Mechanical engineering Experience: Minimum 7 to 10 Yrs Minimum 6 years’ of experience in electrical/power/utility industry dealing with medium voltage protection and switchingear products Experience in independently leading a large size switchgear project from scratch to launch. A Day In The Life Interact with US clients to understand and gather project requirements. Lead design & development of medium voltage protection and switchgear product/ sub-system design as per the requirements. Research, review, and implement best practices, new and emerging technologies, and design patents for new and existing development. Generate conceptual 3D design, engineering calculations and detailed design for extensive range of electro-mechanical products using Autodesk Inventor or SolidWorks’. Converting the ideas into practically feasible product-oriented design. Validate conceptual design integrity using FEA analysis. Deliver complete and accurate detailed design drawings as required for part manufacturing with GD&T. Create Drawings based on ASME Y14.5M – 1994 standards. Generate documentation including design spec, DFMEA, part drawings, engineering bill of materials and assembly drawing per Hubbell standard. Good understanding of IEEE standards and experience in creating the type test plan. Experience in conducting the type test with external laboratories. Support manufacturing team in defining the product manufacturing process flow, PFMEA, control plan and with new tooling validation. Driving the project from scoping phase to launch phase. Working knowledge in vault, windchill and SAP is required. Knowledge of DFM and DFA is an added advantage. What will help you thrive in this role? Hands on experience in designing fault interrupting products such as VCB/ACB or recloser or circuit breaker (any one preferred). Sound knowledge in designing medium voltage disconnecting switches and load breaking air insulated or gas insulated switchgears. Hands on experience in designing latching and actuating mechanisms for VCB/ACB/recloser/capacitor switches (any one preferred). Knowledge in arc plasma physics and its interruption. Knowledge in electro-mechanical and electro-magnetic assemblies. Basic knowledge in magnetics design & selection of electro-mechanical actuators like solenoids & Ct’s or transformers. Hand on experience in short circuit test, di-electric testing, short time withstand current test and its result interpretation. Working knowledge in any one PDM and PLM software’s. Proficient in creating Geometric Dimensioning and Tolerancing (GD&T) as well as fabrication drawings using Inventor and SolidWorks. Proficient in sheet metals, castings and plastic design and its manufacturing process.

Objective : As Design Lead (Electrical - AC), the person shall be capable of reviewing & executing Engineering Activities like AC SLD, Building Layouts, Earthing Layouts, Cable Sizing Calculations, Transformer Sizing, LT / HT Breakers of Solar PV Power Plants. He shall facilitate the modellers in development of BIM 3D Model for PV Solar Power plants. In addition, she / he has to coordinate with other departments including Inter-departmental checks covering Civil/ Structural, Instrumentation, MEP and others. The Design Lead (Electrical AC ) shall be required to provide support for the engineering activities covering the full cycle of works from pre-bid engineering to support during commissioning and warranty periods and to extend support to site team. She / He shall lead a team of Design Engineers and Draughts Persons to manage the Engineering activities within budget, deliver on time and maintaining a high quality of engineering. Key Responsibilities Timely Delivery of Engineering Drawings & Documents Ensure deliveries are aligned to Project Schedule Review drawings by Design Engineers & Draughts Persons. Checking of design & sizing calculations of engineering electrical equipment and obtaining approvals from the client Review of Vendor deliverables pertaining to Engineering As Lead Engineer Electrical, the person shall be capable of Preparing, reviewing & executing Electrical Engineering from 400V to 33kV level. Strong Knowledge in large scale Solar power plant and its operations related to generations, inverters is expected Activities for Renewables Projects as per the Roles assigned to him/her in the respective domain. She / He must have following in his/her domain. Strong knowledge in medium voltage and high voltage electrical equipment like, Switchgears, transformers, cables, etc (upto 400kV) is expected. Strong knowledge in international standards like IEC, IEEE is expected. Good knowledge in understanding the international Grid code requirements and local utility standards are expected, especially for SAARC regions. Knowledge in ETAP, ACAD, PSS/E is expected. In addition, she/ he must coordinate with other departments including Inter-departmental checks covering Civil/ Structural /MEP/ Instrumentation and others (as applicable). Experience in PV plant Layout design, Cable sizing, Voltage drop calculation Good Knowledge in Earthing and Lightning calculation/layouts. Knowledge in Solar power plant and its operations related to generations, inverters is expected. Knowledge in IEC standards related to Modules, Inverters and other related item Shall possess customer/consultant handling related to technical clarifications. Technical Expertise The Design Lead (Electrical AC) is required to have an overall knowledge of equipment layouts and necessary calculations. The Design Lead (Electrical AC) should also have detailed knowledge of Solar PV Power Plants. She / he should have the understanding of engineering activities covering SLD Preparation, Layout Engineering, Earthing, Cable Routing, Lighting, Lightning Protection, Cable Tray Routing etc. She/he should be capable of performing design & sizing calculations of Busbar, UPS, Battery, LT Transformer, Earthing Conductor, calculations (Short circuit force.). The Design Lead (Electrical AC) is required to have knowledge on National and International Codes and Standards. The Design Lead (Electrical AC) is required to understand and interpret the contractual technical requirements and facilitate the Project Teams as and when required. In addition, the Design Lead (Electrical AC) should also have an overall understanding of the inter-disciplinary (Civil & Structural, Mechanical and Instrumentation) design aspects of electrical equipment. Operating Network Internally: Head of Engineering, Section Heads, Design Engineers, Draughts Person, Operations Team, Site Execution team & Supply Chain Management team Externally: Clients (Site Execution & Engineering team), Consultants & Vendors Key Performance Indicators On Time Delivery Productivity Enhancement Digitalization Risk Identification and Mitigation Cost Control Quality Control Customer Satisfaction (Customer Service Report) Optimization of Layouts Incorporation of Standardization (Eliminating inefficiencies) Value Engineering , Innovation Software Skills Required General awareness of Dialux and MS Office. Desirable awareness of ETAP.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we’ll give you what you need to make it happen. It won’t always be easy, growing takes grit. But at ABB, you’ll never run alone. Run what runs the world. This Position reports to: TMC- (Trade and Transportation) Manager What We Believe In At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. That's our story. Make it your story. Your Role And Responsibilities In this role, you will have the opportunity to manage Trade & Compliances processes, and look after the custom operation, Trade Advisory, Trade Compliance, Trade & Transport, follow with the Freight forwarders & shipping lines, ensure the material delivery. The work model for the role is This role is contributing to the ABB India, Electrification group for the Smart Power Business, in the Trade & Compliances Division, for the Bangalore Location. You will be mainly accountable for: Manage daily import/export shipments across air, ocean, and road, ensuring smooth customs clearance, on-time delivery, and compliance with ABB policies and global trade laws. Act as the primary point of contact for customs brokers and authorities, providing guidance on regulatory compliance, HS classification, and resolving valuation or classification issues. Oversee documentation accuracy and record-keeping, including shipping documents, duty-free license utilization, compliance reviews, and maintaining data in trade systems. Coordinate with suppliers, freight forwarders, and internal stakeholders to track shipment milestones, resolve documentation issues, and ensure efficient, cost-effective movement of goods. Coordinate cost optimization and continuous improvement, including freight spend validation, duty-saving initiatives, risk mitigation, and transport planning to reduce lead times. Qualifications For The Role Track KPIs of customs brokers and logistics service providers, ensuring performance and compliance with targets. Manage export incentive recovery (DBK, RODTEP) with accurate post-export data management to ensure FEMA compliance. 8–12 years of relevant experience in Trade & Compliance operations. Bachelor’s degree with a Postgraduate qualification in International Business & Trade Compliance. Thorough knowledge of Inco-Terms, HS Classification, customs and trade policies, BIS, QCO, and FEMA regulations. Oversee external audits (customs, DRI), respond to notices, and advise business units on regulatory actions. Manage logistics service providers for effective, compliant international logistics operations and oversee MIS preparation for compliance tracking. More About Us ABB Smart Power provides energy distribution solutions for data centers, industrial and manufacturing plants, critical infrastructure and commercial buildings. The Division’s technical teams work closely with industry partners, delivering advanced solutions that support rapid growth, energy transition, and sustainability objectives. The Division’s portfolio includes industrial circuit breakers, low-voltage systems, motor starting applications, and safety devices like switches and relays. Its Power Protection unit supports the world’s largest data center companies with advanced energy-efficient UPS solutions. The Division’s ABB Ability™ Energy Manager provides a scalable, easy-to-use platform that helps organizations save energy and reduce CO2 emissions. We value people from different backgrounds. Could this be your story? Apply today or visit www.abb.com to read more about us and learn about the impact of our solutions across the globe. Fraud Warning: Any genuine offer from ABB will always be preceded by a formal application and interview process. We never ask for money from job applicants. For current open positions you can visit our career website https://global.abb/group/en/careers and apply. Please refer to detailed recruitment fraud caution notice using the link https://global.abb/group/en/careers/how-to-apply/fraud-warning.

Description As an Automotive Cybersecurity Engineer, you will be responsible for assessing and enhancing the security of connected vehicles through advanced penetration testing, wireless and hardware exploitation, and embedded system analysis. You will evaluate vehicle communication systems, infotainment platforms, and remote entry mechanisms to identify vulnerabilities that could compromise vehicle safety, privacy, and functionality. This position is ideal for cybersecurity professionals passionate about automotive technologies, embedded interfaces, and threat simulation. Responsibilities Perform Security Testing of In-Vehicle Systems: Conduct assessments of vehicle internal networks (e.g., CAN, OBD-II) to identify and exploit vulnerabilities in communication flows and control mechanisms. Analyze infotainment systems and user interfaces for privacy concerns, data leakage, and potential malware injection points. Simulate remote and physical attack vectors, including key fob signal replay, wireless intrusion, and unauthorized access. Evaluate Embedded & Wireless Communication Interfaces: Assess the security of Bluetooth, Wi-Fi, and RF-based protocols used in the vehicle ecosystem. Examine communication channels between connected mobile applications, infotainment clusters, and backend services. Test for privilege escalation, data interception, and firmware or hardware manipulation. Reverse Engineer Vehicle Architectures: Understand and map circuit-level data flows across ECUs and control modules. Extract and analyze firmware, debug interfaces, and physical ports for security analysis. Utilize diagnostic tools, CAN analyzers, and SDR platforms for in-depth testing. Identify Vulnerabilities and Recommend Mitigation: Document test findings with detailed risk assessments and technical evidence. Work with internal teams and OEMs to recommend security hardening measures. Contribute to the ongoing improvement of testing methodologies and lab capabilities. Stay Aligned with Industry Standards: Ensure compliance with national and international automotive cybersecurity standards, including AIS 189, ISO/SAE 21434, and UN R155. Stay updated on emerging vehicle technologies and cyber threat landscapes. Eligibility Educational Background: Bachelor’s degree in electrical/Electronics, Computer Science, Cybersecurity, or related discipline. Technical Skills: Knowledge of vehicle networking protocols (CAN, LIN, UDS). Experience with CAN analysis tools (CANalyzer, SavvyCAN, PCAN). Familiarity with Android-based systems, ADB, rooting, and mobile OS exploitation. Experience in wireless exploitation (Wi-Fi, Bluetooth, RF using SDR). Circuit and system-level debugging, reverse engineering PCBs, or automotive modules. Experience: 1–4 years of experience in penetration testing, embedded security, or automotive security assessment. Desired Eligibility Exposure to AIS 189 or ISO/SAE 21434 frameworks. Participation in hardware-based CTFs, red teaming, or automotive-focused security research. Familiarity with tools such as Metasploit, Burp Suite, IDA Pro, Ghidra, Wireshark, and SDR tools. Certifications like CEH, CRTP, OSCP, PJPT, PNPT, or relevant embedded/automotive certifications. Ability to work in lab environments and travel for on-site testing engagements. Travel As and when required, across the country for project execution and monitoring as well as for coordination with geographically distributed teams. Communication Submit a cover letter summarising your experience in relevant technologies and software along with a resume and the Latest passport-size photograph.

We are looking to strengthen our team at our site in Malacca Senior Electronic Design Engineer (m/f/d) Based in Melaka Job Description: This role involves designing machine control systems to meet CE and safety standards, preparing electronics circuit diagrams, and improving electrical processes. Key responsibilities include collaborating with cross-functional teams, redesigning products to enhance functionality or reduce costs, and overseeing prototype development and testing. The position also requires documenting engineering changes, providing training, troubleshooting internal and external product issues, and supporting the assembly process. Additionally, the role includes managing projects, participating in 5S activities, and assisting with part selection and procurement. Key Responsibilities: Design of machine control systems according to CE & local authoritative safety requirements Preparation of Electronics Circuit Diagram (ECD) for serial lot assembly, customer upgrades as well as specific customer new machines Identifying deficiencies/weaknesses (with supporting data & calculations) in electrical processes/components and developing improvements Meeting with business management, Sales, Assembly, internal R&D members, Procurement and suppliers to discuss product ideas. Conducting market research and evaluating similar products and their functions Redesigning of products to enhance equipment functionality/application, reduce lead-time, due to product end of life (obsolete) or to reduce cost Creating design projects and specifications sheets including test instructions for new process/parts implemented Presenting product designs/prototypes to management, Sales or customer Overseeing the engineering of product prototypes Development and distribution of Engineering Change Notice (ECN) to all relevant department or personnel Testing & documenting prototype products for functionality, ease-of-use and longevity Resolving product/equipment issues both internally (Assembly, Service, Carrier Tape Production & inter plant support) and externally (Customer) either by remote or physical support Conducting and documenting training to personnel from Assembly, Training Center, Service, Carrier Tape Production, Sales or customer. Collaborating with Project Managers for proper allocations and tracking resources for on-time completion of tasks/projects/evaluations 5S activities are carried out at own workspace frequently and practised through the relevant R&D offices. Act as internal project manager for development/evaluation projects when and if assigned Preparing documents on critical analysis and providing solutions for corrective/preventive actions Perform hand-on assembly in Assembly & Carrier Tape department when and if the need arises Support selection and purchasing of items, technical support for sourcing of parts, e.g clarifying questions and specifications with suppliers Other tasks assigned by superior Requirements: Master craftsman in electronics or engineer specialized in electronics Open communication and able to work individually and in a team (within R&D and/or inter-department) Experience in E-CAD system Siggraph, Or CAD, Microsoft Office tools, database ProFile and P2 Good command of English Knowledge of relevant regulations, laws, machine design rules and norms Critical and analytical thinking Teamwork and collaboration Attention to detail, Problem-solving, Leadership, ability to multi-task Respect for procedures and standards and proper documentations Good & flexible time management Ability to perform under time pressure Good organization skills Good stress management Ability to accept failures and criticisms and work towards improvement Creativity and innovation We offer: Performance Bonus Contractual Bonus Attendance Bonus Insurance Coverage Medical Claim (Staff & Family) Medical Check up/Dental treatment/Eye wear Have we raised your interest? Then we look forward to receiving your application! If you have any questions about the position or are currently in an employment relationship and would like to clarify in a personal interview whether we offer the right conditions for you before you apply, we will be happy to help. Of course, we guarantee absolute discretion. Simply contact us and we will arrange a telephone appointment to discuss all the details individually. Yusof Lutfi will be happy to answer your questions at 6062757204

A Day in Your Life at MKS: As a Scientist at MKS-Atotech, you will be a part of materials science department under Chemical and Physical Characterization (CPC) for preferred innovation partner in R&D as well as external customer. In this role, you will report to one of the Team Manager (Materials Science). You Will Make an Impact By: You are responsible for independently conducting, analyzing, and reporting materials science investigations using advanced tools such as FE-SEM, XRF, and optical microscopy etc., while also handling assembly tasks such as soldering and bonding properties of printed circuit boards Partner with R&D teams in the development of new products and processes You will prepare and deliver quality reports, manage documentation to enhance customer satisfaction Ensure the operational availability of the laboratory equipment and troubleshooting of instruments Documentation of materials science processes and investigations according to ISO 9001/14001/45001/17025 Safety is our top priority—lab activities are conducted in adherence to HSE requirements, including proper storage and handling of chemicals as per SOPs and MSDS guidelines, and the safe disposal of effluents Abide MKS Atotech compliance policy What will you bring to the team: PH. D in Material Science/ Chemical Engineering/ Physics/ Chemistry with relevant 0-2 years of experience Result-oriented and independent work combined with a strong hands-on attitude Strong sense of ownership Willingness to learn, a positive attitude toward teamwork, and a flexible approach to embracing change Good communication skills in English Good user knowledge of MS Office software and communication tools (e.g. MS Teams) Preferred Skills: (Optional) Candidates with hands-on research experience will be given preference Sound knowledge of QM systems (ISO norms) Prepared to travel domestically and internationally A positive and constructive fundamental attitude The ability to apply knowledge and skills to new research fields #LI-MK1 Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be “U.S. persons.” “U.S. persons” are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Instruments, Inc. and its affiliates and subsidiaries (“MKS”) is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: accommodationsatMKS@mksinst.com . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

YES (Yield Engineering Systems, Inc.) is a leading manufacturer of reliable, high-tech, cost-effective capital equipment that transforms materials and surfaces at the nanoscale. From startups to the Fortune 50, our customers rely on YES to help them unleash products that change lives – from cellphones and IoT devices, to AI and virtual reality, to diagnostic tests for COVID. As a preferred provider of wet and dry process technology, we look forward to talking with smart, energetic, team-oriented people who can grow with us. We provide competitive salary and benefits, including long-term incentives, and some of the best co-workers you’ll find anywhere. If this appeals to you, please read on! Job Title: Electrical Engineer I Location: Coimbatore, India. Responsibilities include but are not limited to: Technical assignments for the design and development of semiconductor capital equipment and other industrial machinery and will draw upon their experience with AC/DC power distribution, automation & PLC control systems, and digital/analog interface & cabling interconnection. Key Skills required: A quick learner. Team player with the ability to work with other disciplines to develop products. Electrical Hand calculation: Load analysis, SCCR (Short Circuit Current Rating) Calculation, Phase balance & etc. Good knowledge & understanding of the Power distribution & control system. Lab skills for measurement using various instruments is required. Knowledge of electrical drafting (SLD, three-line diagram). Able to interpret ANSI/IEC electrical schematics. Software for electrical design: SolidWorks/AutoCAD. Added Advantages: Understanding of LT Panels, special-purpose machines, industrial interfaces, and the manufacturing process for semiconductors. Required Qualifications: UG degree in Electrical Engineering. 4-5 years of work experience. Willingness to take on new tasks. Excellent written and verbal communication skills. Detail-oriented. Compensation: YES offers a stimulating and fun working environment, competitive salaries and benefits, and long-term incentives. Additional Information: YES is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need. Come to find out why YES is such a great place to work. Apply today!

We are looking for a highly motivated fresher Electrical Engineer to join our team as an Trainee Electrical Engineer . This is an excellent opportunity for a recent graduate to gain hands-on experience in electrical system design, CAD drafting, site supervision, and project execution within a professional engineering environment. You will work closely with experienced engineers and contribute to the successful delivery of electrical projects, including solar photovoltaic (PV) and marine systems. KEY RESPONSIBILITIES Electrical Design Support: Assist in the design of low-tension (LT) and medium- voltage (MV) electrical systems up to 150 kW and generators up to 150 kVA under senior guidance. CAD Drawing Preparation: Support in the creation and modification of electrical drawings using AutoCAD, ensuring compliance with Indian Register of Shipping (IRS) standards. Site Assistance: Join senior engineers on site visits to observe and assist in the supervision of electrical installations and commissioning activities. Technical Documentation: Help prepare, organize, and submit drawings and documentation required for internal and external approvals. Troubleshooting: Assist in resolving minor technical issues and ensure project activities progress smoothly. Equipment Familiarization: Learn about project-specific electrical equipment and support in their selection and specification review. Safety and Standards Compliance: Understand and apply relevant safety codes, Indian standards, and project requirements in all assigned tasks. KEY REQUIREMENTS Educational Qualification: Bachelor’s degree in Electrical and Electronics Engineering (EEE). Technical Knowledge: Basic understanding of electrical systems, circuit design, and AutoCAD. Familiarity with Indian electrical codes and practices is desirable. Problem-Solving Skills: Ability to approach challenges with a learning mindset and assist in developing practical solutions. Communication and Collaboration: Strong communication skills and the ability to work effectively as part of a team.· Learning Attitude: Willingness to actively learn, take initiative, and grow in a professional engineering environment. Salary: ₹15,000 per month

At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You’ll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. A Day in the Life This position applies extensive technical expertise towards electronics hardware design to provide solutions of complex technical problems and provide solutions that require the regular use of ingenuity and creativity. Work is performed without appreciable direction and with considerable latitude in determining technical objectives of assignment. POSITION RESPONSIBILITIES The Senior Electrical Engineer is responsible for providing leadership in the development of cutting-edge products used in the medical field. Specific tasks include: Leading various initiatives within New Product Development / Sustenance such as design changes, supply chain improvements, analysis and determination of critical component replacement and CAPA support. Designing, developing, testing and documenting hardware designs and applications. Leading the analysis and modeling of identified design solutions to ensure fulfillment of sub-system requirements and system architecture. Leading the development of circuit designs based on sub-system requirements and system architecture. Providing leadership in planning and conducting user evaluations of product concepts. Providing leadership in identifying and addressing technical risks, product hazards and failure analysis. Providing subject matter expertise of the designs and its components to internal and cross-functional development teams. Supporting and troubleshooting circuit designs. Providing technical expertise in the support and maintenance of existing products. Ensuring adherence to Medtronic and other quality standards including design procedures and compliance requirements. Interfacing with all project team members including engineering (mechanical, electrical, software, systems, and test), quality, regulatory, marketing, technical communications, end users, technical support, production, and suppliers. Participating in and leading on-going professional development activities. Leading the identification and implementation of process improvements. Willingness and ability to assume increased responsibility. Leading the organization, estimation, scheduling, resourcing and completion of project milestones. Performs duties in compliance with environmental, health and safety related site rules, policies or government regulations. Strong oral and written communication skills. Strong leadership skills and mentoring capabilities. Ability to work in a team environment and directly contribute to its success. Ability to drive changes and influence culture. Strong inclination towards new technologies, create Proof of Concepts. Travel requirement: Occasional international and domestic travel may be required for less than 25%. All other duties as assigned. ______________________________________________________________________ BASIC QUALIFICATIONS EDUCATION REQUIRED: BE/ BTech/ME/MTech in Electronics/Instrumentation/Systems or relevant specialization in Engineering YEARS OF EXPERIENCE 10+ years of Electronics circuit design-based product development ______________________________________________________________________________ PREFERRED COMPETENCY Strong electronics circuit designs based on Micro-processor, Micro-controller. Good at Analog & Digital circuit designing along with component selection Peripheral interface design capabilities for IOs, Displays, ADC/DAC, Sensors, etc Strong testing skills based on Compliance/Standard requirements along with automation capabilities Expertise in any of the Ecad(Altium) tools for schematic drawing, circuit simulations, Layout reviews, etc Understanding of Manufacturing process and development of required test set-up Hands on experience of various tools/processes essential for debugging, fault analysis, field complaints Good to Have Experience in the medical device industry and/or surgical techniques. Experience in planning and conducting user evaluations of product concepts, analyzing data, documenting evaluation methods and results, and presenting design recommendations to product teams. Ability to provide creativity while solving complex problems without known solutions. Ability to assess new technologies via comprehensive reviews of the state-of-the-art Project management skills include leading a project team as well as planning and estimation of tasks, milestones, resources and budget. Physical Job Requirements The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. Benefits & Compensation Medtronic offers a competitive Salary and flexible Benefits Package A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage. This position is eligible for a short-term incentive called the Medtronic Incentive Plan (MIP). About Medtronic We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission — to alleviate pain, restore health, and extend life — unites a global team of 95,000+ passionate people. We are engineers at heart— putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary.

We Are: At Synopsys, we drive the innovations that shape the way we live and connect. Our technology is central to the Era of Pervasive Intelligence, from self-driving cars to learning machines. We lead in chip design, verification, and IP integration, empowering the creation of high-performance silicon chips and software content. Join us to transform the future through continuous technological innovation. You Are: You are a seasoned professional with a deep understanding of Analog and Mixed Signal Circuit Layout. With a minimum of 3 years of experience, you bring a strong background in transistor-level analog and mixed-signal layout design. You possess extensive knowledge in CMOS and FINFET technologies, and your expertise in semiconductor device physics sets you apart. Your problem-solving skills are top-notch, and you are detail-oriented, self-directed, and passionate about learning new techniques. You are adept at communicating effectively with cross-functional teams to ensure successful project execution. You thrive in a dynamic environment and are excited about the opportunity to contribute to cutting-edge technology that drives the future. What You’ll Be Doing: Design and development of transistor-level analog and mixed-signal layout. Device level floorplan, placement, routing, and physical verification. Troubleshoot physical verification issues to achieve clean and desired results. Create and review layout documents to ensure they meet quality standards and are delivered on time. Plan, estimate area/time, schedule, delegate, and execute tasks to meet project milestones in a multi-project environment. Collaborate with cross-functional teams to ensure successful project execution. The Impact You Will Have: You will drive the design and development of high-quality analog and mixed-signal layouts. Your expertise will ensure the successful implementation of CMOS and FINFET technologies. Through effective troubleshooting, you will contribute to achieving clean physical verification results. Your attention to detail will ensure that layout documents meet quality standards and deadlines. By managing project schedules and milestones, you will help deliver projects on time. Your collaboration with cross-functional teams will enhance project success and innovation. What You’ll Need: Bachelor's or Master's degree in Electrical Engineering or a related field. Minimum 3 years of experience in Analog and Mixed Signal Circuit Layout. Proficiency in Analog Layout Flow from device placement to GDS release. Strong knowledge of CMOS and FINFET technologies and semiconductor device physics. Experience with EDA tools for custom mixed-signal layout flows. Understanding of CMOS fabrication technology and deep sub-micron effects on layout. Knowledge of electro-migration, reliability concepts, and ESD/LUP concepts as applied to layout. Passion for learning and exploring new techniques. Who You Are: Detail-oriented and self-directed with excellent problem-solving skills. Strong communication skills for effective collaboration with cross-functional teams. Ability to manage multiple projects and meet deadlines effectively. Innovative thinker with a passion for technological advancement. Team player who thrives in a dynamic and fast-paced environment. The Team You’ll Be A Part Of: You will be part of a highly skilled and dedicated team focused on pushing the boundaries of analog and mixed-signal design. Our team collaborates closely with cross-functional departments to drive innovation and deliver high-performance solutions. We value creativity, teamwork, and a commitment to excellence. Rewards and Benefits: We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non-monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process.

Job Title- Manager - Corp Sales (Travel & MICE) Location- West Delhi, Rama Road Industry Preference- Travel, Hospitality and Event only Experience - 4+ Years in MICE Sales, corporate travel, or hospitality sales Salary Bracket - 7 to 9 LPA About Adotrip- Adotrip.Com Pvt. Ltd. is one of the first Futuristic Online Travel Platform to Book Flights, Hotels, Buses, Tour Packages, and more. We help people to explore Events, Festivals, Destinations, Trip Talkies, Travel News, and AI based Circuit Planner Tool. Key Roles & Responsibilities- Handling the entire sales cycle -Generation of the leads, Business presentations/ proposals, and closing the deal As part of the corporate team, your job will be to showcase Adotrip’s values of Consumer Focus, Commitment to Results, and Continuous Improvement through innovative solutions. Understand corporate travel requirements and propose tailored MICE and travel solutions. Collaborate with internal teams to design customized travel and event packages. Interfacing with decision makers ((Admin/HR/Procurement/Trade Marketing/CXOs/Finance Managers etc.) of corporate organizations to pitch Adotrip services. Creating and maintaining a monthly sales funnel. Building relationships with new accounts and maintaining strong relationships with existing corporates. Analyzing the current market trends for scoping competition and adopting best practices. Ensuring quick response and resolution of queries and escalations by the clients. Working closely with other departments like MICE, Airline Operations, and Hotel Onboarding to ensure cross-selling and smooth operations. Knowledge and Skills- 4+ years of experience in corporate sales within MICE, travel, or hospitality sectors. Candidates currently working in corporate sales preferably from travel and event management. Should have a corporate database. Basic knowledge of P&L management. Strong communication, influencing, and great interpersonal and stakeholder management skills. Excellent presentation skills. Business development skills and proven sales record. Creative and proactive approach Interested Candidates, please send your CV's @ hr@adotrip.com Job Types: Full-time, Permanent Pay: ₹55,000.00 - ₹75,000.00 per month Benefits: Paid time off Schedule: Day shift Fixed shift Application Question(s): How many years of experience do you have in Corporate Travel Sales? Have you ever worked with any Travel Agency ? What is your current/Last CTC ? Are you comfortable with the job location West Delhi, Moti Nagar or Gurgaon? Are you an Immediate Joiner? Work Location: In person

Job family: Engineering Business area: Hydropower Contract location: New Delhi, DL, IN Working location: New Delhi Location type: Office Location / Office-based Contract type: Permanent Job description: Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do! We are at the forefront of future engineering technologies, with solutions that ensure the success of our clients in key industries that are shaping the future of the world we live in. General Description As an Electrical Design Expert, you will play a crucial role in the successful design and engineering of the Electrical Power Systems (EPS) and equipment for Hydro Power Projects. Your responsibilities will encompass a wide range of tasks, starting from single-line diagram creation to ensuring compliance with standards and regulations for systems up to 500kV. You will collaborate with the customer and cross-functional teams to accelerate project timelines while maintaining the highest quality standards. You will also need to mentor junior engineers and lead initiatives focused on continuous process improvement. JOB RESPONSIBILITIES AND TASKS Electrical Design and Engineering: Develop single-line diagrams, perform load flow analysis, and conduct short-circuit calculations/studies. Both basic and detailed engineering of Electrical Power Systems for Hydro Power Projects, encompassing Low and Medium-voltage Switchgear, DC Systems, Low and medium-voltage busducts and cabling system, Power and Distribution Transformers (Oil / Dry type), Reactors, Rectifier Transformers and Static Frequency Converts (SFC), Generator Circuit Breakers (GCB), EHV Substations and associated Switchyard equipment, Gas Insulated Switchgear (GIS), EHV XLPE Cabling system, Overhead Transmission lines, Public Address and Communcation System, Grounding systems, and Illumination. Conduct equipment sizing, e.g., Current and Voltage Transformers (CT/VT), Neutral Grounding Transformers, DG sets, Aux. Transformers, Reactors, etc., ensuring alignment with overall technical project requirements. Engineering Excellence: In-depth technical knowledge of Electrical Balance of Plant (EBoP) packages. Clarify and communicate design details with customers, addressing any queries or concerns. Excellent equipment sizing and selection skills. Utilize engineering software and equipment sizing tools like ETAP and ensure a "first-time-right" approach. Provide technical support to the Procurement and Project Management teams during technical negotiations. Customer Focus: Prioritize customer satisfaction and maintain a strong focus on quality. Troubleshooting skills: Demonstrate creative problem-solving skills. Offer technical solutions to project sites during erection, commissioning, and warranty periods. Cross-functional and Supplier collaboration : Interface with cross-functional teams, including procurement, quality control, and erection & commissioning, and the suppliers to ensure seamless integration of engineering activities within defined time limits and to expedite project progress. Continuous Improvement: Collaborate with vendors, fostering the development of alternate designs and innovative solutions. Drive continuous improvement efforts in engineering processes and actively seek opportunities for design optimizations without compromising contractual or project requirements. Independent Project Handling: Take ownership of the design for Electrical systems and equipment within assigned Hydro Power Projects, ensuring they meet project-specific requirements. Mentorship: Provide guidance and mentorship to junior design engineers, fostering their professional growth and development. Timely Delivery: Monitor and enforce adherence to design schedules, ensuring on-time delivery (OTD) of engineering systems while prioritizing customer needs. Adherence to standards and Quality Assurance: Ensure that the design and engineering of packages meet guaranteed and contractual requirements while adhering to relevant industry standards, regulations, policies, and procedures. QUALIFICATION REQUIREMENTS Qualification: BE/ BTech in Electrical Engineering. Experience: 15- 20 years Skills and Abilities: Proficiency in using engineering software and tools, like ETAP. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Technical Project management skills. Knowledge of national and international standards and regulations. Leadership and mentorship capabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 17716

The Laptop Technician is responsible for diagnosing, repairing, and maintaining. The role involves troubleshooting hardware and software issues, replacing defective components, and ensuring that laptops function optimally for end-users. Knowledge of hardware components, chip-level repairs, and circuit troubleshooting Experience with BIOS flashing, driver installations, and software troubleshooting Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹35,000.00 per month Work Location: In person

Job family: Engineering Business area: Hydropower Contract location: New Delhi, DL, IN Working location: New Delhi Location type: Office Location / Office-based Contract type: Permanent Job description: Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do! We are at the forefront of future engineering technologies, with solutions that ensure the success of our clients in key industries that are shaping the future of the world we live in. General Description As an Electrical Design Expert, you will play a crucial role in the successful design and engineering of the Electrical Balance of Plant (EBoP) systems and equipment for Hydro Power Projects. Your responsibilities will encompass a wide range of tasks, starting from single-line diagram creation to ensuring compliance with standards and regulations for systems up to 500kV. You will collaborate with cross-functional teams to accelerate project timelines while maintaining the highest quality standards. Additionally, you will have the opportunity to mentor junior engineers and drive continuous process improvement initiatives. JOB RESPONSIBILITIES AND TASKS Electrical Design and Engineering: Develop single-line diagrams, perform load flow analysis, and carry out short-circuit calculations/studies. Both basic and detailed engineering of Electrical Power Systems for Hydro Power Projects, encompassing Low and Medium-voltage Switchgear, DC Systems, Low and medium-voltage cables, Power and Distribution Transformers (Oil / Dry type), Generator Circuit Breakers, EHV Switchyard equipment, Gas Insulated Switchgear (GIS), EHV XLPE Cabling system, Overhead Transmission lines, Grounding systems, and Illumination. Conduct equipment sizing e.g., Current and Voltage Transformers (CT/VT), Neutral Grounding Transformers, DG sets, Aux. Transformers etc., ensuring alignment with overall technical project requirements. Engineering Excellence: In-depth technical knowledge of Electrical Balance of Plant (EBoP) packages. Clarify and communicate design details with customers, addressing any queries or concerns. Excellent equipment sizing and selection skills. Utilize engineering software and equipment sizing tools like ETAP and ensure a "first-time-right" approach. Provide technical support to the Procurement and Project Management teams during technical negotiations. Customer Focus: Prioritize customer satisfaction and maintain a strong focus on quality. Troubleshooting skills: Demonstrate creative problem-solving skills. Offer technical solutions to project sites during erection, commissioning, and warranty periods. Cross-functional collaboration : Interface with cross-functional teams including procurement, quality control, and erection & commissioning to ensure seamless integration of engineering activities within defined time limits and to expedite project progress. Continuous Improvement: Collaborate with vendors, fostering the development of alternate designs and innovative solutions. Drive continuous improvement efforts in engineering processes and actively seek opportunities for design optimizations without compromising contractual or project requirements. Independent Project Handling: Take ownership of the design for Electrical systems/sub-systems and equipment within assigned Hydro Power Project packages, ensuring they meet project-specific requirements. Mentorship: Provide guidance and mentorship to junior design engineers, fostering their professional growth and development. Timely Delivery: Monitor and enforce adherence to design schedules, ensuring on-time delivery (OTD) of engineering components. Adherence to standards and Quality Assurance: Ensure that the design and engineering of packages meet guaranteed and contractual requirements while adhering to relevant industry standards, regulations, policies, and procedures. QUALIFICATION REQUIREMENTS Qualification: BE/ BTech in Electrical Engineering. Experience: 8- 12 years Skills and Abilities: Proficiency in using engineering software and tools, like ETAP. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Technical Project management skills. Knowledge of national, and international standards and regulations. Leadership and mentorship capabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 15317

Job family: Engineering Business area: Hydropower Contract location: New Delhi, DL, IN Working location: New Delhi/Mandideep Location type: Office Location / Office-based Contract type: Permanent Job description: Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do! We are at the forefront of future engineering technologies, with solutions that ensure the success of our clients in key industries that are shaping the future of the world we live in. General Description As an Electrical System Engineering Expert and Technical Project Manager, you will play a crucial role in the successful engineering and execution of the Electrical Power Systems (EPS) for Hydro Power Projects. Your responsibilities will encompass a wide range of tasks, starting from single-line diagram creation to ensuring compliance with standards and regulations for systems up to 500kV. You will be fully responsible for system-related engineering, costs, schedule, quality, and delivery targets. You will collaborate with cross-functional teams to accelerate project timelines while maintaining the highest quality standards. Additionally, you will have the opportunity to mentor junior engineers and drive continuous process improvement initiatives. JOB RESPONSIBILITIES AND TASKS Electrical Design and Engineering: Develop/ review single-line diagrams, perform load flow analysis, and conduct short-circuit calculations/studies. Review both basic and detailed engineering of Electrical Power Systems for Hydro Power Projects, encompassing Low and Medium-voltage Switchgear, DC Systems, Low and medium-voltage busducts and cabling system, Power and Distribution Transformers (Oil / Dry type), Reactors, Rectifier Transformers and Static Frequency Converts (SFC), Generator Circuit Breakers (GCB), EHV Substations and associated Switchyard equipment, Gas Insulated Switchgear (GIS), EHV XLPE Cabling system, Overhead Transmission lines, Public Address and Communcation System, Grounding systems, and Illumination. Review equipment sizing calculations, e.g., Current and Voltage Transformers (CT/VT), Neutral Grounding Transformers, DG sets, Aux. Transformers, Reactors, etc., ensuring alignment with overall technical project requirements. Engineering Excellence: In-depth techno-commercial knowledge of Electrical Balance of Plant (EBoP) packages. Clarify and communicate design details with customers, addressing any queries or concerns. Provide support to the Procurement and Project Management teams during technical/ commercial negotiations. Customer Focus: Prioritize customer satisfaction and maintain a strong focus on quality. Focus on Cost and Quality: Prompt documentation and reporting concerning deviations (cost, schedule, quality), and measures to mitigate impacts from deviations. Inputs for claim and risk management to Commercial managers. Troubleshooting skills: Demonstrate creative problem-solving skills. Offer technical solutions to project sites during erection, commissioning, and warranty periods. Cross-functional and Supplier collaboration : Interface with cross-functional teams, including procurement, quality control, and erection & commissioning, and the suppliers to ensure seamless integration of engineering activities within defined time limits and to expedite project progress. Continuous Improvement: Collaborate with vendors, fostering the development of alternate designs and innovative solutions. Drive continuous improvement efforts in engineering processes and actively seek opportunities for design optimizations without compromising contractual or project requirements. Independent Project Handling: Take ownership of the project/s from concept to commissioning for Electrical Power Systems of assigned Hydro Power Projects, ensuring they meet project-specific requirements. Mentorship: Provide guidance and mentorship to junior design engineers, fostering their professional growth and development. Timely Delivery: Monitor and enforce adherence to design schedules, ensuring on-time delivery (OTD) of engineering systems while prioritizing customer needs. Adherence to standards and Quality Assurance: Ensure that the design and engineering of packages meet guaranteed and contractual requirements while adhering to relevant industry standards, regulations, policies, and procedures. QUALIFICATION REQUIREMENTS Qualification: BE/ BTech in Electrical Engineering. Experience: 15- 20 years. Skills and Abilities: Proficiency in using engineering software and tools, like ETAP. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Technical Project management skills. Knowledge of national and international standards and regulations. Leadership and mentorship capabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 17718

The Candidate must have Circuit Design and Panel Board Designing Background. The candidate should be the Diploma in Electrical and Electronics Engineering. Job Type: Full-time Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Provident Fund Schedule: Day shift Supplemental Pay: Yearly bonus Ability to commute/relocate: Sriperumbudur, Tamil Nadu: Reliably commute or planning to relocate before starting work (Required) Education: Diploma (Preferred) Experience: total work: 3 years (Preferred) Work Location: In person