183 Chemical Testing Jobs - Page 2

Role & responsibilities Job Description Location : - Faridabad Job Tile : Senior Executive : Quality Control (Chemical) Purpose of the position: - This position is to perform analysis of water samples & raw material in Quality Control Laboratory. Job Responsibility:- 1. To ensure timely sampling and analysis of raw material & water samples as per approved procedures. 2. To ensure that all volumetric solutions, reagents and indicators are prepared, standardized and re- standardized as per approved procedures. 3. To prepare all reports related to water samples and raw material. 4. To attend trainings on water sample & raw material analysis. 5. To report all failures to QC Head / in charge immediately after notice , related to water & raw material sampling and testing. 6. To maintain stock of chemicals, glassware and reagents required for raw material and water analysis is monitored and maintained. 7. To prepare & review all documents related to raw material and water analysis. 8. To maintain change room practice. 9. Any other task assigned by reporting manager / seniors. 10. Functional reporting shall be as per departmental organogram. The Job Responsibilities may be reviewed/added as per company requirements as and when require.

Responsibilities: * Conduct water analysis & testing using PH Meter & chemical methods. * Collaborate with production team on quality control measures. * Analyze chemical samples for product development.

Conducting tests, analyzing samples, and documenting results to ensure products meet quality standards. * Testing and Analysis * Documentation and Reporting * Equipment and Laboratory Maintenance * Compliance and Safety * Quality Analysis

Review of applicable contractual requirements (technical standards, specifications, etc) & highlight execution/inspection problems if any. Inspection of Pressure Vessels & components: (Filters, Boilers, Storage Tanks etc) from raw material stage to final stage, as per different codes & standards like ASME Sec-VIII. Including Documents review like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, stage-wise inspection of welding & fabrication like joint fit-up, welding inspection, NDT, components inspection, final inspection like leakage testing by hydraulic & pneumatic means etc. Inspection of Piping: Piping inspection for Process Plant, including activities like stage-wise inspection, components inspection, Dimensional, Spool inspection at fabricator’s site. Inspection of Pipes & Tubes: Inspection of ERW & SS pipes as per ASTM, IS and API standards. Including Raw-material stage to Final inspection i.e. review of documents, witness of strip & pipe U.T., Eddy-current testing, MPT, Hydro-test, mechanical test & other test requirements for black as well as galvanized pipes. Handled many projects of pipes inspection as per different grades. Inspection of piping components like Flanges, Fittings, Valves, Pumps including various testing activities as per applicable piping code & product standard. Inspection of Castings: Inspection of Critical jobs like Shafts & Roller assemblies, Gears, Mill Heads, with activities like Raw Material Identification, Applicable physical & chemical Testing, U.T. in proof machined condition, final inspection after machining, M.P.I., D.P.T. Inspection of Steel structure for hydro power plants: Inspection of structural parts of hydropower projects like radial gates, spillway stop logs, surge shaft, trash racks etc M.P.I., D.P.T., and UT of parts. Also includes inspection of other structural parts like structural steel section, trusses, and towers. Selection of the most appropriate inspection techniques. Monitoring, coaching and supervising of one or more inspectors. Vendor Assessment: An audit activity on documentation & different aspects of quality control & quality assurance at vendor’s site, analysis of system of NC follow ups & effectiveness of implementation of QMS, product testing. Subsequent Vendor Rating on the basis of observations. Capacity assessment of manufacturing facilities of manufacturers for various clients. Project coordination & management: Preparation & implementation of inspection checklists. Project coordination & management for inspection of bought out items and site inspections for various Project coordination for fabricated structural parts

Lab chemist required at pio manihari, sonipat for a spices company Qualification- Any graduate Exp- min 2 yrs Salary- upto 25k Timing - 9.30 to 7 pm

Sample Preparation Data Analysis and Reporting Equipment Maintenance Food Safety Compliance Research and Development Support Documentation and Record Keeping Knowledge of Food Safety Quality Control Testing Communication Skills Problem-Solving Skills

(Urgent Requirement for Sr. Lab Chemist / Lab Chemist) JOB DESCRIPTION:- Position : Sr.Lab Chemist / Lab Chemist Desired Experience: 0 to 5 year Qualification: B.sc/M.Sc (Environment,Chemistry). Location : Vadodara Required Skills: Report Preparation. Documentation and Calculations as per the requirements of NABL/NABET. Hands on experience in NABL Audit will be an advantage. Roles and Responsibilities: Perform Environment Laboratory Analysis of samples from Environment Monitoring, Air, and Water & Waste Water & Soil as per the Standard Operating Procedure. Assisting the Senior Chemist or Laboratory Head in performance of duties Upkeep of laboratory records and calculation sheets, including data management. Handling Laboratory Equipment (after training) for conducting analysis Coordination with Site Team for Project planning, visits and data collection. Literature Survey for specialized studies Assist in conducting Feasibility & Treatability of certain samples of Effluent or Industrial Waste. Maintenance of Logbook as per the instruction Provide assistance in Environment Audits and other laboratory audits Assistance in documentation for GPCB Audits, MoEFCC audits and NABL documentation as per the requirements. Assist in ISO Documentation as per requirement Documentation and Calculations as per the requirements of NABET. Report Preparation. Co-ordination within the departments and even with clients Maintain Good Laboratory Systems. Hands on experience in NABL Audit will be an advantage. CONTACT DETAILS: Name: Soham Bangera Address: Green Empire (Anupushpam Habitat Centre), Above Axis Bank, Near Yash Complex,Gotri, Road, Vadodara 390021 Email Address: hr@gccipl.net & hrm1.gci@gmail.com Whatsapp: - 9377450557 Website: www.greencircleinc.com

At QIMA, our mission is to provide our customers with smart solutions to make products you can trust. We serve the consumer goods, food and life sciences industries in over 100 countries, helping more than 30,000 brands, retailers, manufacturers, and growers achieve excellence in quality. We combine on-the-ground expertise with digital solutions that provide accuracy, transparency, and intelligence for quality and compliance data. What sets us apart is our unique culture. Our 5,000 Qimers live and make decisions every day based on our QIMA values. With passion for our customers, integrity, and a commitment to making things simple, we have revolutionized the testing, inspection, and certification industry. Are you ready to embark on this exciting journey with us and help us fulfill our mission Our Consumer Products business supports brands, retailers, and manufacturers around the world to deliver safe, high quality, and ethical products to their customers. Every day, our inspectors, auditors, and lab technicians use their expertise to protect the products you use every day in your home: from clothing and footwear to toys and baby products, electronics, appliances, and furniture. Are you detail-oriented, organized, and interested in both administrative processes and scientific data Join our team and take on a key supporting role at the interface of laboratory, customer service, and data systems. In this position, you will help ensure smooth operations by preparing professional test reports, maintaining limit values in our LIMS system, and supporting the Customer Service team also in answering chemistry-related client inquiries. Your Responsibilities: Administrative Support for Customer Service - Assist with order processing, documentation, and internal communication - Support Customer Service in handling chemistry-related client inquiries in coordination with the lab team - Maintain and update customer and order data in internal systems Preparation of Test Reports - Draft test reports based on analytical results from chemical testing - Ensure clarity, accuracy, and consistency of reports using predefined templates and internal standards - Collaborate closely with the laboratory to clarify technical questions Maintenance of Limit Values in LIMS - Enter and update chemical limit values in the Laboratory Information Management System (LIMS) - Ensure data accuracy and documentation based on internal guidelines or customer specifications - Coordinate with the quality team and technical departments to keep data up-to-date Qualifications - Completed degree in a scientific or administrative field (e.g., chemical lab technician, CTA, office management) - Ideally some experience in a laboratory, reporting, or administrative environment - Basic understanding of chemical terms and parameters - Confident in using MS Office; experience with LIMS is a plus - Strong attention to detail, structured working style, and team spirit - Good written and verbal communication skills in English; German is a plus What We Offer: - A diverse and supportive work environment at the intersection of science and administration - On-the-job training and room to grow - Collaboration with cross-functional teams and international clients - Flexible working conditions and a modern workplace,

Maintain the specific quality of water required for a supercritical power plant. You will be responsible for testing input chemicals, coal, and analyzing ash, as well as treating all the waste generated in the plant. Your key responsibilities will include maintaining the boiler feed and steam parameters according to the Original Equipment Manufacturer (OEM) recommendation. It is essential to ensure the proper usage of Personal Protective Equipment (PPE) when handling hazardous chemicals and to maintain and upkeep the membrane as per design specifications. You will be required to conduct testing of water and steam parameters in line with thermal power requirements. Furthermore, you will be responsible for testing chemicals for their purity assessment for various plant applications such as the water treatment plant (Pre-Treatment + D.M. Plant), Reverse osmosis plant, condensate polishing unit, and cooling water system. Your experience in water treatment plants, R.O water plants, chlorination plants, condensate polishing systems, and cooling water systems will be valuable, especially in dealing with effluent water with and without cooling towers and both Open & Closed recirculation systems. You will also assist in the maintenance of the above plants, upkeep of laboratory testing equipment, and planning and procurement of chemicals. Additionally, you will be involved in pre-commissioning and post-commissioning activities of various plant components, including pre-treatment plants, DM plants, chlorination plants, and the pre-chemical cleaning of the boiler and cooling system, followed by passivation/preservation to commercial operation. Your role will also require familiarity with the equipment used in water, oil, and instrumental analysis. You will collaborate in day-to-day improvements in the Quality Management System to meet process requirements and provide updates on power plant corrosion chemistry. Attending knowledge-sharing sessions to stay informed about developments in the external environment will also be part of your responsibilities.,

Responsibility for conducting Chemical/Instrumental testing of raw material samples to ensure quality standards are met for products manufactured at Sun Pharmaceutical Industries Ltd, both for the domestic market and export to emerging markets. This includes analyzing and reporting stability and finished goods samples, monitoring gowning and sanitation practices, and ensuring compliance with standard operating procedures for analytical instruments. Responsible for system upgrades in alignment with Corporate Quality (CQ) and regulatory guidelines, operating analytical equipment in quality control during assigned shifts, and maintaining accurate documentation and record-keeping practices following Good Documentation Practices (GDP) and laboratory protocols. Supporting internal audits, regulatory inspections, and FDA audits by adhering to best practices and following all cGMP regulations as per Schedule M. Ensuring safety procedures are followed when handling analytical equipment and hazardous materials, completing assigned trainings to address identified training needs, and calibrating analytical equipment as per calibration procedures. Maintaining analytical equipment and laboratories in optimal working condition, overseeing stock levels of working standards, columns, reagents, chemicals, and glassware, and following procedures for non-conforming results as outlined in Standard Operating Procedures (SOPs) related to Out-of-Trend (OOT), Laboratory Incidents, and Out-of-Specification (OOS) results. Adhering to administrative procedures regarding attendance, leave, and other benefits in compliance with company policies and regulations.,

As a Chemical Engineer, you will be required to have a minimum Bachelor's Degree in Chemical Engineering or Chemistry, with a preference for a Master's degree. You should possess over 5 years of total experience in chemical testing, specifically a minimum of 2 years in the Polymer/Foam industry. This is a full-time position that offers benefits such as food provision and Provident Fund. The work schedule is during the day shift, with a yearly bonus provided. In terms of education, a Bachelor's degree is required. Your experience should include at least 5 years of total work experience and a minimum of 2 years in the polymer industry. This position requires in-person work at the specified location.,

We are looking for a detail-oriented Lab Chemist to perform chemical analyses, test materials, and ensure compliance with quality and standards. The ideal candidate excels in problem-solving and is comfortable working with lab instruments and data.

Responsibility for conducting Chemical and Instrumental testing on samples of raw materials. Ensuring the quality of products manufactured by Sun Pharmaceutical Industries Ltd for both domestic and emerging markets. Implementing system upgrades in alignment with CQ and regulatory guidelines. Analyzing and reporting stability and finished goods samples when necessary. Monitoring gowning and sanitation practices within the operational area. Ensuring compliance with standard operating procedures for analytical instrument operation. Operating analytical equipment in quality control as per assigned shifts. Adhering to good documentation procedures and recording results as per SOP on GDP and laboratory practices. Supporting internal audits, regulatory inspections, and FDA audits with best practices. Adhering to cGMP regulations as per schedule M. Maintaining safety protocols for handling analytical equipment and potential hazards. Completing assigned training as per identified training needs through organized sessions or self-study. Calibrating analytical equipment as per calibration procedures for assigned responsibilities. Keeping analytical equipment and laboratories in good operational condition. Managing stock levels of working standards, columns, reagents, chemicals, glassware, etc. Following procedures for non-conforming results as outlined in SOPs for OOT, Lab Incidents, and OOS. Complying with administrative procedures related to attendance, leave, and other benefits.,

Perform chemical analysis, testing and quality control. Ensure all instruments are calibrated and maintain records. Prepare and review Standard Operating Procedures (SOPs), COAs. Support audits, documentation, and inspections. Knowledge of ISO, EHS Annual bonus

Role & responsibilities: 1. Raw Material Testing: Perform chemical and physical testing of ingredients such as flour, sugar, fats, oils, milk powder, and preservatives. Typical tests: moisture content, protein, ash, gluten content, acidity, pH, FFA, peroxide value, color and odor checks. Ensure that each lot of incoming raw material meets internal and regulatory specifications before approval. 2. In-Process Testing: Conduct tests during various stages of production (mixing, baking, cooling, packaging). Monitor parameters like dough temperature, consistency, pH, baking time, texture, and weight. Conduct rapid tests to ensure process control and product uniformity. 3. Finished Product Testing: Carry out final product analysis for quality release. Test parameters: moisture content, water activity (aW), shelf-life simulation, organoleptic testing (taste, texture, aroma). Compare results with product specifications. 4. Packaging Material Testing: Perform basic checks on films, packets, and cartons. Test for GSM, thickness, print quality, sealing strength, and compliance with labeling standards. 5. Lab Equipment Handling: Operate and calibrate lab instruments: hot air oven, pH meter, moisture analyzer, balance, water activity meter, etc. Maintain calibration records and ensure proper working condition of equipment. Documentation & Reporting: Record all test results accurately in both hard copy logbooks and soft copies Prepare COAs (Certificate of Analysis) for raw materials and finished products. Maintain proper sample retention records. Raise NCRs (Non-Conformance Reports) for any deviation observed during testing. Soft Copy Data Management: Maintain structured folders for test reports by date, batch, and product. Use Excel/Google Sheets for entering daily test data with formulas for spec validation. Ensure data is backed up and audit-ready at all times. Tag and link scanned COAs and test reports to batch records. Quality Systems Support: Assist in implementing and maintaining HACCP, ISO 22000, FSSAI, and BRC requirements. Support internal audits and external food safety inspections. Participate in periodic lab process validation and proficiency testing. Quality Control & Analysis: Perform chemical analysis of raw materials (flour, sugar, fats, etc.), additives, and final bakery products. Monitor parameters like moisture content, pH, fat content, ash content, acidity, water activity, etc. Conduct shelf-life studies and sensory evaluations. Data Maintenance in Soft Store scanned PDFs of supplier COAs with batch-wise tagging. Daily QA Summary -Materials tested, issues identified, corrective actions Non-Conformance Log -Rejections, reasons, corrective/preventive actions (CAPA) Inventory of Lab Chemicals reagents, expiry dates, stock levels Skills Required: Knowledge of food chemistry & analytical techniques Good lab hygiene and record-keeping practices Familiarity with FSSAI guidelines and food safety documentation Attention to detail and ability to work in a fast-paced environment Preferred candidate profile Candidates from bakery, confectionery, or FMCG will be preferred. Hands-on experience with chemical testing, wet lab techniques, and QA instrumentation.

Key Responsibilities: Conduct purity analysis , TDS , pH , LOE testing Perform laboratory analysis and testing procedures. Operate and maintain lab instruments. Maintain 5S standards and ensure workplace safety. Assist in quality management system (QMS) practices. Required Skills: Good understanding of raw materials. Proficient in MS Office (Excel, Word, PowerPoint). Strong English communication skills (written and verbal). Fluent in the local language (Tamil preferred). Immediate joiners are highly preferred.

Role & responsibilities: The candidate would be required to take on the responsibility of testing of pharma formulations and ensure quality product and production efficiency. Some of the key responsibilities are: 1. Perform QC tests on raw materials, in process samples, and finished products. 2. Conduct analytical testing using instruments like HPLC ,UV , Ph meter, and titration. 3. Maintain proper documentation as per GMP/GLP guidelines. 4. Prepare and review SOPs, quality reports, and calibration records. 5. Ensure compliance with company standards and regulatory guidelines. 6. Report deviations or non-conformances to the QA team. Preferred candidate profile: The candidate should be hardworking and honest. Should be able to manage time, prioritize work accordingly and work well within a team. Proficiency in MS Word/excel and English is mandatory. Experience in testing is desirable but Freshers may apply

Look after overall activities of wet analysis / chemical lab. Responsible for analysis and reporting of Pharma / Ayurvedic / Homeopathic / Cosmetic / FMCG products. Review and evaluate feasibility of projects / samples received from customers. Required Candidate profile It is on the rolls of Cotecna Life Sciences India Pvt Ltd(Erstwhile Geochem Laboratories) If interested please share profiles on nilesh.kadam@geochem.net.in or any more information call on 9870476784

Greetings from Manpower Resources India Pvt. Ltd.! Manpower Resources India Pvt. Ltd., a leading Executive Search & Selection Company offers services to Manufacturing, Engineering, Infrastructure & Healthcare domain. We have been mandated by a large conglomerate for the below mentioned role. Position Name : QA/QC (Jr. Officer/ Officer) Location : Gujarat Qualification : BSc./ MSc. - Chemistry Experience : 4+ Years and above Key Responsibility Area: Quality Control: Analyses, monitor and control the quality of raw materials, in-process and finish material to maintain consistent quality at every stage of the process and product specification as per required by customer. Conduct daily samplings, sample preparation and testing of materials at every stage of process Monitor calibration of lab equipment Ensure inventory of laboratory chemicals / glass ware Coordination with production purchase and store Dept if any deviation in process and raw materials. Check complete product specification of customer. Quality Systems - Implement IMS related activities through involvement of team members in the section to upgrade quality standards Execute quality improvement objectives Conduct internal audit in department Ensure adherence of Q.A.P for QA Analysis. Statutory compliance - Arrange and monitor maintenance of all statutory requirements and also comply them. As per standard. Update all quality related document Collection of data on daily basis Monitor compilation of data in the specified registers Position & Role details: To Execute day to day Quality control & Quality Assurance operations Sampling & testing of raw materials, intermediates & finished product (Metal, Metal Oxides, Ferro Alloys etc.) To Prepare quality & analytical reports, Calibration of analytical instrument & Prepare quality & analytical reports in MS Office & ERP (SAP) To Coordinate with cross functional department To Collaborate with manager in customer complain and investigating procedure To Maintain & monitoring chemical stock and Monitor laboratory housekeeping To Follow standard operating and safety procedure and processes, Maintain & monitoring chemical stock, PR initiation in ERP (SAP) Hands on experience in wet analysis as well as instrumental analysis Exposure of XRF, LECO Analytical and Problem-solving skill Hands on experience in wet analysis of metal, alloys, slag etc. as well as instrumental analysis, exposure of WD XRF, LECO CS, sample preparation equipment Pulveriser, Hydraulic Press Hands on experience in QHSE management systems (ISO 9001, 14001 & 45001), certified internal auditor for QHSE systems will be preferred Exposure to ERP (SAP), Operational Excellence, KAIZEN, 5S etc.

Job Title: QC Head Qualification : Minimum BSc / MSc Or B Tech / M Tech in chemical Stream. Company Name : Navpad Pigments Pvt Ltd. Location: Rajpur, Near Chattral, Kadi, Gujarat Experience:15 Year experience as QC Head in Ink/Paint or Pigment Industries. Industry: Chemical Manufacturing Job Description: Planning & Execution of Daily QC and In process Lab Operation Activities for smooth and better work culture. Devise and Establish a company's quality procedures, standards and specifications Train and supervision the lab Technical person for quality ISO system, Instrument handling with proper guidance with best safety, health and environment practices. Review customer requirements and make sure they are met Work with purchasing staff to establish quality requirements from external suppliers Ensure all the products have clearly defined specifications with careful & sophisticated quality control measures in compliance to the international standards. Employ the use of various ultra-modern facilities & sophisticated instruments. Trouble shooting during in process checks to achieve Quality and Output. Participating to the pre-inspection or post supply meeting with suppliers wherever necessary. Established the process the Inward QC Lab activities. Responsible for Production planning as per Pending Orders Dispatch schedule and Stock Inventory. Coordinating with various departments such as Marketing and EXIM to issue export documents (MSDS & COA). Allotment of Finish Goods as per Orders, maintain finish goods stock and Prepare Monthly stock statement Quality wise. Provide Guidance to Lab Technical persons to prepare Product presentation for Customers and Marketing Department. Preparation Stability Test of Solvent Inks using Brookfield Viscometer (LVDV 3T Model No.) for customers. Coordinates in handling nonconforming/rejected products and its resolution. Performing in final packing inspection before product dispatch. Overall responsible for Finish goods Stock Management. Make sure that Dispatch schedule as per required & Maintain the Material Stock on FIFO and LIFO Basis. Planning for blending and packing of finish goods as per dispatch schedule and co-ordination with production and Marketing Department. Handling & manage the material sifting verify the physical stock at every day & To transfer material from quarantine area to release zone, rejected zone Instructs and guides the manpower base on SOPs to ensure the completion of activities related to material handling in finished goods and timely dispatch. Submit Monthly Stock statement to CEO of the company. Along with dispatch details, Handling Loss and Balance Finish Goods. Responsible to ensure the inventory control and to maintain the minimum level of inventory of Finish Goods Contact Details :9898033290 E mail m.barot@navpadpigments.com

Responsibilities: * Conduct lab tests on agrochemicals using lab chemicals * Prepare reports with accurate results * Maintain laboratory equipment and safety protocols * Collaborate with R&D team on material testing projects

As an Intern at Graviss Food Private Limited, your day-to-day responsibilities will include: - Sampling and analyzing finished products (ice-cream) and semi-finished products to ensure quality standards are met. - Ensuring the quality of raw material, packing material, and finished food products by conducting regular inspections. - Inspecting plant hygiene and personal hygiene practices to maintain a clean and safe working environment. - Conducting Good Manufacturing Practices (GMP) and Good Hygiene Practices (GHP) training sessions to educate staff on best practices. - Documenting online production line activities, all chemical testing reports, training sessions, and other relevant documents for record-keeping. - Working in third-party production as a Quality Assurance (QA) and production officer to oversee quality control processes. About Company: Graviss Food Private Limited is the exclusive licensee of Baskin Robbins, the world's favourite ice cream brand, in India and South Asia. Since 1993, it has delighted millions with premium ice creams, cakes, and desserts, offering a variety of flavours tailored to diverse tastes. With a strong franchise network, Baskin Robbins outlets are present across major cities, and its products are widely available in supermarkets and online platforms. Graviss Foods prioritizes quality, hygiene, and sustainability, establishing itself as a market leader in the ice cream segment. Committed to excellence, Graviss Foods continues to deliver happiness, one scoop at a time.,

You will be responsible for conducting lab testing and analysis in a Pharma Laboratory located in Gurugram. The ideal candidate should possess an MSc in Chemistry, B.Pharma, or a related field with 2 to 10 years of experience. Your main duties will include chemical testing of raw materials, finished products, cosmetics, Ayurveda, Sidha, and Unani products. You should also have knowledge and experience in handling instruments such as HPLC, GC, GC-MS/MS, ICP-MS, and Dissolution equipment. Additionally, you will be required to maintain documentation in accordance with NABL Audit standards. This role requires attention to detail, strong analytical skills, and the ability to work effectively in a laboratory setting.,

You will be responsible for understanding and identifying new metrology and materials testing instruments based on new product requirements. This includes procuring new instruments and collaborating with relevant R&D, production, and process engineering staff to comprehend the material specifications needed for a specific application or product. Your duties will involve managing and maintaining instruments, records, and calibration schedules. You will be in charge of maintaining test requests and logs, as well as preparing and issuing test reports. Ensuring traceability through standard operating procedures for test sample management is also crucial. You are expected to understand Critical to Quality (CTQ) parameters, measure CTQ, and provide insights to design teams to uphold production quality standards. This entails identifying, selecting, and recommending materials based on various factors such as weight, strength, heat/cold resistance, cost, and durability. You may need to participate in product testing processes and measure CTQ parameters to assess wear and tear resulting from endurance or reliability testing. Your role will involve preparing in-house standards and SOPs for material testing. In case of observed failures, you will gather and analyze data using different root cause analysis tools. The ideal candidate should have hands-on experience in testing various material categories including Ferrous, Magnet, Copper, Steel, Sheetmetal, Casting, Forging, ABS, Polymer, Chemicals & Solvents, Adhesives, Paint Resin, Hardener, Enamels, Oil, Grease, Gases, Rubber, Nylon, Teflon, PCB Cladding, Fabric, Coating Agents, Chrome, and more. Additionally, proficiency in performing tests such as hardness, surface finish, coating thickness, gloss, Spectrophotometry, abrasion, peel-off, scratch resistance, stress, strain, BH curve, thermal, chemical, and adhesion strength tests is required. Experience with instruments like CMM, UTM, and other relevant equipment will be advantageous. The successful candidate should have 3-7 years of relevant experience and be located in Pune.,

The Trainee Quality at Pon Pure Chemical India Private Limited in the Warehouse department based in Chennai, Tamil Nadu, India will have the following roles and responsibilities: - Following Safety department guidelines for all activities and strictly adhering to them. - Reporting safety issues to the respective Safety Incharge, Warehouse Incharge, and Quality Manager. - Using appropriate Personal Protective Equipment during all activities. - Conducting Packing Material Inspection, Supplier Visits, Audits, and providing training and support for new vendor development. - Monitoring the packing material cleaning process. - Sampling and analyzing Chemical Inward. - Visual inspection of repacked products and labels before dispatch. - Preparing and issuing test reports. - Generating Purchase Orders and procuring chemicals required for Laboratory Analysis. - Supporting in handling customer complaints and resolving queries within the specified time limit. - Assisting Sales & Marketing with customers" technical queries. - Controlling and supporting Sales & Marketing in the liquidation of Color/Non-Moving Material. - Providing training to Supervisors and Contract workers on SOPs and day-to-day activities. - Ensuring the correctness of Labels and their content for Repacked Products. - Submitting reports to Management on a daily basis, WIG, JC, and other reports as and when required.,