83 Checker Jobs

Role and Responsibilities: We are looking for a Mystery Shopping Executive who will be responsible for conducting mystery shopping activities over calls and maintaining accurate records. Key responsibilities include: Conduct mystery shopping activities (primarily through calls). Review customer service interactions and identify areas for improvement. Support in soft skills development by assessing communication and customer-handling skills. Maintain detailed records of mystery shopping activities and feedback. Prepare simple reports for internal review. - Communication & Etiquette: Ensure professional use of language and adherence to customer service etiquette. Qualifications: - Graduate and Fresher can apply; candidates with 1-2 years of experience in mystery shopping/calling/customer service will be preferred. - Prior experience in calling/customer service will be preferred. - Good communication skills and basic MS Excel knowledge.

Responsibilities: * Create detailed steel models using Tekla software. * Ensure accuracy and compliance with AISC standards. * Collaborate with structural engineers on project design.

Job Overview: Preparation of Erection Drawings, Generating BOQs & PO’s, Checking drawings from Detailing Team. Responsibility and Duties: Should be able to detail the Permit set & Construction plans as per the client standards. Should have knowledge in AISC & MBCI standards. Should have knowledge on both Framing and Sheeting. Should have exposure in Light Gauge Steel material. Should be able to perform quality checks on the drawings from Detailing team. Should check BOQ’s and PO’s to ensure all the material has been billed. Should take responsibility to close the projects within the target date with good quality. Should be able to clarify the doubts and guide Detailing team. Should be able to prepare RFI’s to client. Should be able to handle client calls.

Hiring Tekla Modeler with 26 yrs exp. in structural steel Modelling and detailing. Proficient in Tekla Structures, fabrication & erection drawings, GA, AISC/BS/IS/Eurocodes. Strong coordination & client interaction skills required.

Senior Tekla Checker : 5-7 years of checker experience Junior Tekla Checker: 24 years of checker experience Location: Chennai, Tamil Nadu Type: Full-time Proficiency in Tekla Structures & Australian Steel Detailing Standard is an Advantage Provident fund Annual bonus

Role & responsibilities Review and verify the accuracy of medications dispensed Ensure proper labeling, packaging, and storage of medications. Assist in maintaining accurate inventory records for medications, especially controlled substances. Preferred candidate profile Bachelors or Doctor of Pharmacy (PharmD) degree from an accredited college of pharmacy.

Key responsibilities include preparing shop drawings, erection drawings, and GA drawings; ensuring accuracy and adherence to project specifications and standards; and collaborating with engineers to resolve design issues Required Candidate profile Mechanical Engineer with Tekla Software working knowledge of atleast 3 to 8 years in PEB Industry

Review and verify 3D models and drawings created in Tekla Structures for accuracy and compliance with project specifications. Ensure adherence to AISC standards, US detailing practices, and client requirements. Required Candidate profile Check shop and erection drawings, including connections, assemblies, and material lists, for errors or inconsistencies.

Exp in AutoCAD, Good Exp in Drafting & Checking of RCC (Equipment Foundations, RCC Buildings, UG Structures & Site grading drawings) & Steel Structures including Fabrication drawings in Oil & Gas with quality procedures. Required Candidate profile Checking of drawings up to client issuance. Should have experience working in Steel Structures.

Responsibilities: * Ensure compliance with OSHA standards during construction phases * Collaborate with design team on detailing and checking processes

Roles & Responsibilities: Must have very good System Verilog/UVM knowledge with prior work experience on live projects. Must have expertise in PCI Express and/or Ethernet bus protocols This is a desirable skill. Change to Experience in PCI Express and/or Ethernet bus protocols desirable. Also move it to the end. Expertise in AMBA bus protocols and ARM CPU Must have experience in Unix, Configuration Management, Bug tracking and verification dashboarding tools Experience in developing functional verification environments including the components like monitors, checkers, scoreboards and assertions Experience in verification methodologies using random stimulus along with functional coverage Scripting Language (PERL/Python/Shell/Makefile) Must have good debugging and problem-solving skills Good communication skills and ability & desire to work as a team player Must be highly motivated and independent contributor with good aptitude and attitude Educational Qualification: BE/ME or BTech /MTech

Walk-in Drive for Experienced Professionals Cadeploy (Hyderabad - Sunday, 31st August 2025) Cadeploy, Hyderabad is hiring Tekla, PEMB, Rebar, SDS/2, AutoCAD, QA/QC-SDS/2 professionals with 3+ years of experience for our Hyderabad office. Join us and take the next step in your career growth! Open Positions: Tekla Structural Steel Tekla Modelers & Checkers (3+ years, AISC & Australian standards) PEMB (Pre-Engineered Buildings) Tekla & AutoCAD Sheeting or Framing Checkers (3+ years) MBS Designers (3+ years) XDA Detailers (3+ years) Rebar Detailing Lead Estimator Lead Detailer Estimators / Checkers (3+ years) SDS/2 SDS/2 Modelers (3+ years) QA/QC QA/QC Checkers (SDS/2, 2+ years) Walk-in Drive Details: Date: Sunday, 31st August 2025 Time: 10:00 AM 05:00 PM - IST Venue: Cadeploy Corporate Office, 1st Floor, Sanali Spazio Building, Plot No-19, Software Units Layout, Madhapur, Hyderabad - 500081 Desired Candidate Profile: Minimum 15 years of experience (role-specific) Strong knowledge of Tekla/AutoCAD/MBS/XDA/Rebar Detailing/SDS/2 or QA/QC-SDS2 Hands-on experience in structural steel detailing / PEMB / rebar estimation/checking Good communication & teamwork skills Contact Details Email: vamshia@cadeploy.com WhatsApp : 8977611148 Bring your updated CV and walk in directly for the interview. Please share this opportunity with your network. Thank you :)

Responsibilities: Lead structural design projects using Tekla software with AISC standards. Ensure compliance with steel detailing and checker requirements. Familiarity with international standards ( AISC ) preferred. Health insurance Provident fund

Company: Aarbee Structures Pvt. Ltd. Location: Bangalore, Cochin & Coimbatore Experience: Minimum 4 years in Steel Structural Detailing Salary: As per industry norms Role Definition: The Steel Detailer & Checker will assist Project Leaders (PLs) and Project Managers (PMs) in managing and executing detailing projects. The role requires collaboration with project teams to ensure timely, accurate, and high-quality steel detailing work while adhering to AISC standards. Job Responsibilities: For Steel Detailers: 3D Modelling & Detailing using Tekla/SDS2 as per project instructions. Interpret & implement project specifications, contract drawings & RFIs. Coordinate with engineers & other trades for seamless integration. Identify design revisions and prepare ABM, ABM change sheets & hold lists . Finalize packages for client submissions. Study approval comments and explain them in BFA meetings. Ensure documentation is complete, updated, and stored appropriately. Follow company standards with minimal supervision and high quality. Report errors immediately to avoid project delays. For Checkers: Review & validate Shop drawings, erection drawings and 3D models to match project contract drawings, client standards and AISC compliance . Ensure quality control by identifying and correcting detailing errors. Collaborate with detailing teams to resolve discrepancies . Maintain project progress and keep documentation up to date. General Responsibilities: Meet deadlines while maintaining high accuracy and efficiency. Stay updated with project specifications & client standards. Read & apply project-related communications. Train & mentor junior team members in detailing techniques. Prepare RFIs and report project status to Sr. PEs, PLs, and PMs. Work in a team-oriented environment with professionalism & enthusiasm. Attend training programs (Technical & Non-Technical) organized by management. Technical Knowledge: Software Expertise: SDS2 / Tekla Structures Industry Knowledge: Civil & Structural Engineering with AISC Standards Technical Skills: Strong proficiency in Modelling, Editing & Checking using SDS2/Tekla Ability to provide technical training to team members Non-Technical Skills (Personal Attributes): Excellent Communication Skills (Written & Verbal) Professional behaviour & strong work ethic Self-motivated & confident Team Collaboration & Knowledge Sharing Time Management & Deadline Adherence Stress & Conflict Management Qualifications & Experience: Education: Diploma / bachelors degree in civil engineering Experience: Minimum 4 years in Steel Structural Detailing Role & responsibilities

Hiring for Lead/Modeler - Tekla - offshore - oil & gas Industry. Total Experience - 3 to 10 yrs. Work Location : Hyderabad Notice Period : Immediate to 30 days Industry : Oil & Gas Skills required - Tekla - modelling, design with offshore experience. Interested candidates can share your profiles to ta@techpennar.com.

Role & responsibilities 2+ Years Experience in AISC / US Standards Experience in Steel Detailing

Role & responsibilities 3+ years Experience in Checking 3+ years in AISC 3+ Years in SDS2

Responsibilities: * Ensure compliance with AISC standards * Collaborate on shop drawing reviews * Check Tekla models for accuracy * Conduct model checks using specified software * Review GA drawings for completeness

Designation: Isometric Checker(Piping) Experience: 8-15 years | Location: Bangalore Key Responsibilities: Review piping isometric drawings from E3D for accuracy and completeness. Cross-check with P&IDs, GA drawings, and 3D models. Verify BOM, dimensions, welds, and supports. Requirements: - Diploma/BE in Mechanical Engineering. Proven offshore isometric checking experience. Proficiency in AVEVA E3D. Interested candidates can share their updated CV to anirban.p@ipsgroup.co.in or whatsapp 9831097897.

7+ Years Experience in Structural Steel Design/Detailing Detailing Proficiency TEKLA (Editor / Modeller / Checker) with AutoCAD, ** Work Location: Chennai & Trichy ** Walk-In Interview: Date: 22 & 23 August 2025 (Friday & Saturday) Interview Address: Eversendai Construction Pvt Ltd The Lords, Block-1, 5th Floor, Ekkattuthangal, Chennai 32

2+ Years Experience in Structural Steel Design/Detailing Detailing Proficiency TEKLA (Editor / Modeller / Checker) with AutoCAD, ** Work Location: Chennai & Trichy ** Walk-In Interview: Date: 22 & 23 August 2025 (Friday & Saturday) Interview Address: Eversendai Construction Pvt Ltd The Lords, Block-1, 5th Floor, Ekkattuthangal, Chennai 32

Description of Position: The Senior Checker leads the quality control process for all drawings and models produced by the project team. This role is responsible for ensuring the accuracy, clarity, and compliance of all deliverables with applicable standards and client requirements. The Senior Checker also mentors other checkers and supports the project management team in maintaining high-quality outputs across multiple projects. Key Responsibilities Lead the review and approval of detailed shop and erection drawings and 3D models. Ensure drawings and models meet project specifications, relevant standards (e.g., AISC, CISC), and internal QA requirements. Ensure all deliverables adhere to 3D Engineerings Quality Management System (QMS) standards. Support ongoing review and updates to QMS documentation and checking procedures. Identify, document, and communicate errors, inconsistencies, and omissions across drawing sets and models. Write and issue Requests for Information (RFIs) to clarify design discrepancies or missing information in contract documents. Coordinate directly with project managers, senior detailers, and modelers to resolve complex technical and coordination issues. Mentor and support junior checkers in technical development and quality review methods. Provide final QA sign-off before document submission to clients or fabricators. Support the development of templates, checklists, and tools to standardize quality review procedures. Monitor compliance with company processes and contribute to continuous improvement initiatives. Serve as the secondary point of contact during the Project Manager’s absence to ensure seamless workflow continuity and effective communication, while also gaining experience in team leadership Required Skills & Qualifications Minimum Extensive experience (10+ years) in steel detailing and checking, including QA leadership. Mastery of detailing and modeling standards, fabrication practices, and construction documentation. Advanced knowledge of software such as Tekla Structures, BOCAD, Advance Steel, and related QA tools. Excellent communication skills and the ability to coordinate with multiple stakeholders. Proven ability to mentor and train others on best practices in checking and detailing. Strong problem-solving skills, especially in managing constructability and coordination issues. High attention to detail, with a proactive approach to risk mitigation and quality assurance. Key Performance Indicators (KPIs) Accuracy and quality of deliverables across all assigned projects. Reduction in errors found during fabrication or construction phases. Effectiveness in mentoring and developing junior checkers. Adherence to and improvement of internal quality processes. Timeliness of final approvals and client-ready documentation.

Job Opportunity at Cadeploy Engineering Pvt Ltd, Chennai Position: Rebar Professionals (Expertise in AISC Standards) Location: Chennai Cadeploy Engineering Pvt Ltd is hiring talented Rebar professionals with expertise in AISC Standards to join our dynamic team. If you are looking to grow your career in the steel detailing industry, we have exciting opportunities for you! Open Positions: 10 Rebar Detailers ( Min 2+ years of experience) 8 Rebar Estimators (Min 2+ years of experience) 6 Checkers (Min 6+ years of experience) Required Skills: Expertise in Rebar Steel Detailing with a focus on AISC Standards Experience in Commercial Projects How to Apply: Interested candidates can share their updated profile to: Email: sahitya@cadeploy.com Contact Person: Sahitya (HR) Phone: 8977611130 We look forward to hearing from you!

1) Senior Checker ( 2 Nos) Roles and Responsibilities • Perform structural steel detail checking to ensure the drawings conform to the specifications, engineering requirements, Indian standards, and operational specific specifications • Must comply with the requirements of the design drawings and all industry standards and protocols. • Provide technical assistance to the Modelers and Detailers • Thorough and proficient with creating RFIs while capable of providing solutions to fabricators • Provide sketches, plans, designs, and layouts as necessary • Provide detailing solutions to address various field fixes as they may arise throughout the fabrication and installation of the steel • Assist the team with any drawing support required to complete the drawing approval, fabrication, or erection process to ensure excellence • Communicate complex and technical application issues to non-technical parties verbally and/or written • Communicate effectively with team, project managers, fabricators, and erectors • Ability to read and comprehend construction plans and specifications Qualifications and Technical Competencies • Bachelors degree of civil or mechanical engineering is required - work experience in TEKLA may substitute as an equivalent to a Bachelors degree • 5-8 years of experience in steel detailing on TEKLA is a must • Working knowledge of Indian codes. • Strong experience in reading and interpreting structural/architectural design drawings • Strong knowledge of steel manufacturing, steel erection, and shop fabrication process • Ability to read and interpret blueprints, plans, and specifications • Basic mathematics including geometry and trigonometry • Knowledge of welding specifications 2) Senior modeler (2 Nos) Roles and Responsibilities • Works closely with Detailers/Checkers and Project Managers to prepare/submit 3D models for the structural and architectural projects for commercial and industrial buildings • Serve as a support analyst and operate detailing platforms such as TEKLA, AutoCAD, etc. • Must comply with the requirements of the design drawings and all industry standards and protocols. • Prepares Bill of Material, Title Block, Template, and Reports as per Clients requirement • Strong knowledge of member placement • The Senior Modeler will suggest connections wherever drawings have insufficient information, subject to the approval of the architect and structural engineer • Ensure accurate and timely delivery of drawings according to companys and/or customers standards • Generates the GA drawings, Shop drawings with related reports • Accurately complete and check all necessary system input for finalization of model and Bill of Materials • Prepares the RFIs and updates in the model as per RFIs response from the customer • Regular upkeep of the Engineering filing system and support Documentation Control • Flexible with performing other related duties as assigned Should be strong in custom component and auto connections. Qualifications and Technical Competencies • Bachelors/Diploma degree of civil or mechanical engineering is required - work experience in TEKLA may substitute as an equivalent to a Bachelors/Diploma degree • 5-10 years of experience in steel detailing with TEKLA is a must • Working knowledge of Indian codes. • Strong experience in reading and interpreting structural/architectural design drawings • Strong knowledge of steel manufacturing, steel erection and shop fabrication process • Ability to read and interpret blueprints, plans, and specifications • Basic mathematics including geometry and trigonometry • Knowledge of welding specifications • Microsoft Office (Word, Outlook, and Excel) and Google Workspace 3) Senior/Junior Detailer (4 Nos) Roles And Responsibilities • Work closely with Modelers/Checkers and Project Managers to prepare/submit fabrication and erection drawings for structural and architectural projects for commercial/industrial buildings • Serve as a support analyst and operate detailing platforms such as TEKLA, AutoCAD, etc. • Must comply with the requirements of the design drawings and all industry standards and protocols. • Provide support in editing standards and/or company procedures which relate to steel detailing • Must have experience and knowledge of existing engineering codes, mathematics, building materials, and other physical sciences • Detailer will suggest solutions anywhere drawings have insufficient information, which are subject to the approval of the architect and structural engineer • Conduct Document Control through revision by keeping track of changes during the drawing creation workflow • Prepare approval, erection and fabrication drawings for projects using TEKLA, AutoCAD, etc. • Accurately complete and check all necessary system input for finalization of fabrication and erection drawings, shop details, and Bill of Materials • Communicate complex and technical application issues to non-technical parties verbally and/or written • Ability to meet scheduled deadlines on a regular basis while maintaining a high level of accuracy, quality, and being able to manage multiple projects at once Qualifications And Technical Competencies • Bachelors/Diploma degree of civil or mechanical engineering is required - work experience in TEKLA may substitute as an equivalent to a Bachelors/Diploma degree • 3-6 years of experience in steel detailing on TEKLA is a must • Working knowledge of Indian codes. • Strong experience in reading and interpreting structural/architectural design drawings • Strong knowledge of steel fabrication and erection • Ability to read and interpret blueprints, plans, and specifications • Basic mathematics including geometry and trigonometry • Knowledge of welding specifications • Microsoft Office (Word, Outlook, and Excel) and Google Workspace.

Role & responsibilities Will be responsible for preparing and checking 2D & 3D Modelling related to Piping Layout, Equipment layout, Isometric drawings etc. Prepare layout and design of complex offshore/onshore piping design systems using 2D and 3D software. Producing quality piping design layouts, layouts of various process skids, orientation of process equipment with nozzle locations and interconnecting piping Assist engineers and Senior designers in resolving piping Checking issues. Preferred candidate profile Proven ability to conduct layout and design for Offshore/Onshore Piping Systems. Knowledge of pipe and fittings, valves, and piping specialties. Ability to develop isometrics from orthographic drawing. Knowledge of the following modules in SP3D /Piping /ISO Draft