303 Casting Jobs - Page 2

Seeking a Sales Manager to manage monthly sales schedules, customer coordination, GRN / Payment follow-up, MIS reporting and market research. Preferred Experience in Sales of Automotive Products for OEM's.

Experience In R&D Field will be Preferred Experience on GD&T Knowledge & Hands on Experience about Preparation of DFMEA Ability create BOM Hands On Experience on Creo (3D Modeling & Drafting) for Sheet Metal, Plastic & Casting Parts Call 7397778272

Mechanical Engineer experience in Li-Ion Battery Pack design, development and testing. (with automotive background) EDUCATION : • BE/B.TECH in Mechanical Engineering/equivalent EXPERIENCE : • 5 to 7 Years of experience in Mechanical design, development, prototype development and testing preferably having experience in automotive background. RESPONSIBILITIES : • Analyze the customer requirements, standards, product requirements and prepare detailed mechanical requirement specification. • Prepare mechanical design for Battery pack assembly – Plastic enclosures, sheet metal brackets, Die-cast part, Busbars, Insulation sheet design, sealing, assembly techniques, etc. using SolidWorks. • Estimation of effort and planning for Mechanical design and development. • Coordinate with Circuit team to prepare design layout for electrical components like – Circuit board, relay, fuse, wiring harness, etc. • Perform design calculations like clearance-creepage, stack-up analysis, glue dozing quantity, screw selection based on strength, Thermal calculations, gasket or sealant design etc. • Apply Design For Manufacturing and Design For Assembly guidelines in the design to meet manufacturing and Assembly requirements • Plan/strategize for the required analysis for analytical verification of concepts. • Analyze the Risk in the design by FMEA methodology in accordance with AIAG-VDA approach. • Prepare 2D Manufacturing drawings, conduct tolerance stack-up studies. • Prepare test plans, test cases and testing of battery components to confirm the requirements. SKILLSETS : • Experience in executing the Automotive project as per process standard – IATF16949 • Experience in completing at least one product from Requirements to mass production • Expertise in SolidWorks CAD Software and knowledge in any simulation software • Experience in plastic, sheetmetal, Busbar, sealing design and Die-casting. • Exposure in thermal cooling design techniques. • Knowledge in material selection based on various properties. • Experience in sealing design techniques based on Ingress protection (IP) rating • Experience in GD&T and Tolerance Stack-up studies • Knowledge in design/product validation testing • Exposure in manufacturing techniques – Injection molding, stamping, machining, etc. • Knowledge of automotive & Li-Ion Battery test and regulatory standards – ISO, IEC, UN

Project Role : Mechanical Engineering Practitioner Project Role Description : Design, analyze and build structures, machines, devices, systems and mechanical processes. Generate, build and test functional prototypes to validate feasibility. Identify opportunities for technological innovation. Must have skills : 3D Modeling Good to have skills : Automotive Engineering, Automotives, NX, Tractor Transmission Design &a Minimum 2 year(s) of experience is required Educational Qualification : 15 years full time educationB Tech in Mechanical Engineering or Automotive or Automobile Engineering Summary :As a Mechanical Engineering Practitioner, you will be responsible for designing, analyzing, and building structures, machines, devices, systems, and mechanical processes. Your typical day will involve 3D modeling, generating, building, and testing functional prototypes to validate feasibility, and identifying opportunities for technological innovation. Roles and Responsibilities: Should have hands on experience (Minimum 4 to 6 years of Experience) in Siemens NX software, responsible for the Design and Development of Tractor transmission systems components Systems design. Experience in Automotive or Tractor or Offroad Vehicles Design Part and Integration on Uni-Graphics Software 3D modelling of parts Casting, Forging, Gears, Shafts and Transmission components. Part drawing, Assembly Drawing and Specification release as per organization Standard practice. Collaborate with cross-functional teams to review and resolve design and manufacturing issues. Apply standards and methodologies to arrive at robust design solutions. Evaluate and select materials for Tractor Transmission components considering performance, cost, and manufacturability. Perform analytical calculations for mechanical transmission parts such as gears, shafts, power transmit shifting systems. Analysis the issue or Problem and find out the solution by using the best design practice like stack-up Analysis, etc. Co-ordinate with inter-departments of New Assembly operation for manufacturing and Validation and resolve issues with Process Team Follow up with External and Internal stakeholders for design Reviews. Able to guide and help the people working in the same team. Professional & Technical Skills Good understanding of Gear Design and Calculation, Stack-Up Analysis and General Dimensioning and Tolerances Good communication, Sound mind, eager to learn new technology, Adaptable, Punctual, hardworking, MS-office. Additional Information Minimum 4 to 6 years of Experience in Automotive or Offroad Vehicle Transmission Systems Design. The ideal candidate will possess a strong educational background in Mechanical Engineering or a related field, along with a proven track record of delivering impactful mechanical engineering solutions. Job Location will be Onsite Deputation at Client Site (Hoshiarpur-Punjab). Qualifications 15 years full time educationB Tech in Mechanical Engineering or Automotive or Automobile Engineering

Ensures that all products meet the required quality standards, conducting tests, inspections, and managing quality control processes within the production environment.

Ensures that all products meet the required quality standards, conducting tests, inspections, and managing quality control processes within the production environment.

Oversee quality assurance for in-house manufactured engineering products, including level gauges and valves. Ensure compliance with industry standards for castings, forged, and machined components. Required Candidate profile Collaborate with production and supply chain teams during machining and assembly processes. Conduct supplier quality assessments, in-process inspections, and final product evaluations.

Strong background of metallurgy (academic qualification must be in metallurgy related discipline. Preferably masters degree) Thorough awareness of new production development cycle (APQP) In depth knowledge of sand types/sand properties Hands-on experience of sand-casting part development (minimum 15 years of experience in sand casting industry) Troubleshooting typical casting defects and countermeasures required for rejection reduction Thorough know how of methoding, gates, riser design Verification of Magma results, their interpretation, and necessary countermeasures.

Kindly share your resume on sv7@svmanagement.com Summary of the Role: Strategic Sourcing, Price Finalization and Price amendment as per decided frequency with suppliers Details of the Job : Hands on experience for cost estimation, negotiation of Engine components of all commodities like Casting, Forging, Plastic, Rubber, Sheet Metal, Proprietary, Electrical and electronic parts etc. Candidate shall have knowledge for different processes of manufacturing, Machining, etc. industry trend for commodity prices and tracking of the same. Candidate shall actively participate in material cost saving initiatives in line with business objectives. Candidate shall have knowledge for technical specifications for various raw materials, suppliers and market intelligence for price movements locally and globally. Working knowledge of SAP ERP MM module, Raising POs and scheduling agreements is essential. Traveling to vendors and evaluating suppliers on the basis of requirements. Reviewing processes at suppliers and explore cost reduction avenues. Candidate Requirements: BE, B Tech/ Diploma - Mechanical with 7 to 10 years of experience Knowledge of Raw Materials, Sources, Gears, Forgings, All commodities of engine components, Machining Processes, Cost Estimations, Presentation skill.

Ring Foundry will be responsible for supervising the end-to-end operations of sand moulding and molten metal casting processes for the production of piston rings, sleeves, etc. This role requires strong technical knowledge.

Factory Roles at Mat Foundry India Pvt. Ltd. (Kharagpur, West Bengal) For Candidates Outside of West Bengal Only | Hot Vacancy | Immediate Joining No any charges required. Direct joining. Only immediate joiners may apply. Company Mat Foundry India Pvt. Ltd. Location: Village Chakturia, Post Sankoa Chakturia, P.S Kharagpur, Dist Paschim Medinipur, West Bengal 721301 Hiring under Vendor Payroll: Reliable Skills Management Services Pvt. Ltd. Job Location: Chakturia, Kharagpur, West Bengal 721301 Duty Hours: 8 hours/day Weekly Off: Sunday Job Categories (Factory Roles): Melting , Molding , Core Maker , Sand Shoveler , Ladle Pusher , Casting Carrier / Sorter , Fettling , Shot Blasting , Quality , Pourer , Loading / Logistics Shift Timings (Rotational): Shift A 06:00 AM 02:00 PM Shift B 02:00 PM 10:00 PM Shift C 10:00 PM 06:00 AM Shifts will be rotational. Candidates must be comfortable working in all shifts. Salary Details (CTC): Monthly CTC: 16,500 Monthly Take-Home: 12,632 (Includes 1,057 monthly bonus) PF (Both Shares): Approx. 3,150/month Eligibility Criteria: Educational Qualification & Experience: 10th Pass: Minimum 2 years of experience in any field 12th Pass / Graduate / ITI: Minimum 1 year of experience in any field Important: Only candidates from outside West Bengal are eligible to apply. Additional Benefits for Non-West Bengal Candidates: Free Accommodation Company-Provided Transport Free Food (for full attendance) Attendance Incentive Policy: 0 Days Absent: 1,000 + Free Food in company canteen 1 Day Absent: 750 2 Days Absent: 500 (Paid with monthly salary; max 2 days leave allowed for any incentive) Apply Now! This is an excellent opportunity for candidates outside West Bengal looking for stable factory work with benefits like accommodation, transport, and attendance incentives. To Apply: Apply directly via Naukri.com OR Send your updated resume to contact@rsmspl.com or whatsapp - 8981933327 Thanks & Regards Reliable Skills Management Services Pvt Ltd Arvind Jha HR Manager 8981933327

Supplier Quality, must knowing - stamping / Casting / Tubing/ injection molding electrical /electronic. VDA 6.3 certified. 8D, CAPA, Why-why analysis. PPAP, PFMEA, SPC, MSA & APQP. POKA-YOKE, Audits, MIS, Customer handle, English strong, 6sigma GB/BB

1. Electrical Maintenance Carrying out day to day activities (Daily management) related to equipment maintenance as per standard maintenance practices. Knowledge of safety standards, SOP, positive isolation, ESI related to equipment. Analysis of the Electrical problems/delays using IBA/Historization module Planning and maintaining spare list (critical/normal/consumable) for electrical maint. Shutdown/major shutdown planning. Carrying out DM/spare planning/other maintenance through SAP-PM. Knowledge of various statutory compliances applicable for Electrical equipment. Coordination with other agencies and maintain effective communication with them. capability to study electrical drawings/,Hydrualic drawings/P&ID/Laout/GA drawing etc. Candidate should have knowledge of PLC(S7-1500), WINCC(HMI) and should be able to search items in software logic along with minor modification in the PLC program. Knowledge of various levels of automation and communication/data flow between them. 2. Mechanical Maintenance Relevant Experience- 1. Melt Shop- a. Candidate should have basic knowledge of melt shop process from arc furnace to CCM equipment. b. Candidate should have experience in melt-shop area mechanical activities having familiarities with arc furnace or BOF, Ladle furnace and caster area equipment, Fume treatment plant area. c. Candidate should have good trouble shooting and fault-finding skill in hydraulic/Pneumatic system and mechanical equipment like gearbox & bearings etc. d. Candidate should have awareness of hazards of hot metal handling. 2. Rebar Mill- a. Candidate should have basic knowledge of rebar process from roughing mill to bundling station. b. Candidate should have experience in melt-shop area mechanical activities having familiarities with mill stand equipment, cooling bed, shear and pinch rolls, vertical looper, double twin channel bar receiver and bundling station equipment. c. Candidate should have good trouble shooting and fault-finding skill in hydraulic/Pneumatic system and mechanical equipment like gearbox & bearings etc. d. Candidate should have awareness of hazard of rebar area. e. Candidate should have experience in gearbox, hydraulic cylinder and mill stands equipment refurbishment. 3. Utilities/Water system- a. Candidate should have knowledge of industrial water circuit and drinking water plant, RO system, ZLD, CETP, STP, HVAC, compressed air system, industrial gas system and fire hydrant system. b. Candidate should be awareness of hazard related to industrial gas and compressed air system. c. Candidate should have adequate experience in maintenance of water system, CETP, STP, HVAC, compressor, pipeline repairs. d. Candidate should have adequate experience in hazardous chemical handling used for dosing. 3. Steel Plant Operations Relevant Experience- EAF (Primary Steel Making) e. Candidate should have basic knowledge of melt shop process from Arc furnace to CCM equipment. f. Candidate should have experience in Electric arc furnace operations activities. having familiarities with arc furnace, Ladle furnace and caster area equipment, Fume treatment plant area. g. Check planning of grades. h. Monitor availability, condition of EAF and guide the controller for appropriate blow. i. Monitor availability of ferro alloys in resp. bins. j. Instruct the controller to give setpoints for ferroalloy additions. k. Guide the regulators for slag free tapping and inspect the stream during tapping. l. Instruct the operators for required manual additions during tapping procedure. m. Ensure availability of all required materials for making heats at tapping stages. n. Inspect and ensure the health of all machines/equipment related to tapping preparations. o. Training of subordinates. p. Housekeeping in EAF area. q. Ensure chemistry control as per grade design and temperature as per required in LF for Secondary steel making process. 4. LF (Secondary Steel Making) a. LF operation for steel making at shift level. b. LF activities: Arcing, purging, Sampling as per grade and temperature required. c. Ensure availability of all required consumable at site and charging bins. d. Instruct the operators for required manual additions if required. e. Ensuring that steel as per order is made and sent to caster for sequencing. f. Co-ordination with all agencies to meet the target. g. Shift administration and subordinate training h. Safety of men and equipment and good housekeeping. i. Ensuring the availability of ladles for steelmaking. j. Heat making as per designed chemistry for particular grade and acceptable to continuous casting machine. Continuous casting machine a. Preparation of machine for casting. b. Co-Ordination with Main Control Room and according to action to all stakeholders. c. Ensure availability of all required consumable at shop floor. d. Adherence to SOPs and Work instructions for each grade of casting. e. Receiving, Dispatching of Tundish after every cast end. f. Ensure safe operation of Timming, lancing and mould activities. g. Provide training on specific safe work practices on Safety and Environment before an employee begins work. h. Provide additional training for new work processes which affects health, safety and Environment and when accidents and near misses occur. Role & responsibilities Preferred candidate profile

Job Summary: We are looking for a Mechanical Engineer to manage the manufacturing of EV motors through third-party vendors. The ideal candidate will be responsible for vendor development, process validation, quality assurance, and ensuring timely delivery of motor components and assemblies that meet design specifications. Key Responsibilities: Identify, evaluate, and onboard vendors for EV motor and component manufacturing. Share detailed motor designs, drawings, and specifications with vendors and ensure DFM/DFA compliance. Coordinate with vendors to develop prototypes and move toward production. Conduct regular visits to vendor sites for process inspection, quality checks, and progress monitoring. Review and approve tooling, fixtures, and manufacturing setups proposed by vendors. Ensure adherence to quality standards, tolerances, and material specifications. Support in negotiating manufacturing timelines, pricing, and delivery schedules. Handle first-article inspections (FAI), pre-dispatch inspections (PDI), and root cause analysis for defects. Maintain documentation related to vendor audits, approvals, and quality reports. Collaborate with internal R&D and design teams for feedback and design improvements. Qualifications and Skills: Bachelors degree in Mechanical Engineering or related discipline. Knowledge of electric motor components: stator, rotor, shaft, housing, etc. Familiarity with manufacturing processes: CNC, casting, lamination stamping, winding, Injection Molding etc. Strong understanding of GD&T, tolerance analysis, and quality standards. Proficient in CAD tools (SolidWorks, CATIA). Excellent communication and negotiation skills to handle vendors effectively. Ability to travel to vendor locations for inspections and audits. Preferred Qualifications: Prior experience in vendor development or sourcing of motor parts. Exposure to EV motor technologies (BLDC, PMSM, or SRM). Knowledge of ISO 9001, IATF 16949, or other quality systems. Why Join Us? Be part of a cutting-edge EV technology company. Play a key role in transforming innovative designs into real-world products. Gain cross-functional exposure in design, manufacturing, and vendor management.

Key Responsibilities: Assemble various types of jewellery locks including GB locks, Spring locks, and Cuban locks with high accuracy. Understand technical drawings and fitting mechanisms. Perform post-casting cleaning, fitting, and alignment for lock mechanisms. Ensure smooth movement and proper functionality of lock components. Conduct visual and functional quality checks to ensure lock durability and finish. Collaborate with the design and production team to resolve fitting or alignment issues. Maintain tools and follow safety and quality control protocols. Assist in training junior karigars, if required. Requirements: 1015 years of hands-on experience in jewellery assembly, particularly in lock mechanisms . Strong understanding of casting processes and post-casting assembly work. Skilled in mechanical fittings for luxury gold jewellery. Ability to work with small components and tools under precision constraints. Familiarity with GB locks, Spring locks, Cuban locks , and other modern jewellery mechanisms. Strong attention to detail and manual dexterity. Team player with a quality-first approach. Preferred Qualifications: Experience in export-quality jewellery manufacturing . Basic understanding of CAD design output (for interpreting lock positions). Prior work in branded jewellery manufacturing setups is a plus.

Role & responsibilities Preferred candidate profile

Roles and Responsibilities: Create high quality product assembly and component designs and drawings using CREO. Have complete understanding of the full product life cycle process and stakeholders and manage the product life cycle using PLM tool-Windchill. Support the execution of processes like Product Design, Validation Consideration Checklist, Design Review, and use of tools such as GD&T, Tolerance Stack Up and CREO to support high-quality design decisions and refinement. Collaborate with cross-functional teams, product/project engineers to design concepts and ensure they meet project requirements. Meet functional Key Performance Indicators (KPIs) and contribute to continuous improvement initiatives. Plan and complete the project deliverables meeting the quality and timeline requirements. Skills and Experience Required: Qualification - B.E Mechanical or Associated Branches Experience Range - 2 to 7 Years Early career professional Experience in using Creo Experience in handling PLM (Windchill preferred) Experience in casting/forging design Experience in using GD&T and conducting Tolerance Stack-up calculations Exposure to manufacturing environment is preferred Exposure to automobile industry is preferred Knowledge of MS Office is essential.

Sr. Mgr AGM DGM - Hot Refining : AboutCMR: CMRGreen Technologies Limited formerly known as Century MetalRecycling Limited is Indias largest producer of Aluminium and Zincdie-casting alloys with a combined annual capacity of over approx 4, 18, 000MT per annum. Since its inception in 2006, it has maintained its fast-pacedgrowth by leveraging latest technology and continuous improvement. CMR, which recycles aluminium scrap to make alloy, has 28-30 percent marketshare in India and is nearly three times larger than its nearestcompetitor. We are having strong presence at PAN India level (North, West & South) with 13 manufacturing units, 5000 strong workforce andsupplies to major automotive industry in India including tier one OEMslike Maruti Suzuki , Honda Cars , Bajaj Auto , Hero MotoCorp and Royal EnfieldMotors . Position/Designation: LeadOperations- Hot Refining JobBand/Designation: C / AGM/ DGM No.of Posts: 1 (One) Department: Operations- Hot Refining Reportingto: Plant Head Qualification:Essential: - Candidate should have fulltime Bachelor's degree in Mechanical/ Metallurgy or alliedEngineering, from reputed institute. Desired:- Masters degree in Metallurgy or in OperationManagement. Essential:- Minimum12 + years of experience in Hot Refining in Aluminium Industries. where in 3+years of experience in Hot refining in a managerialrole. Desired:- Experience withBillet/Slab DC casting will be added advantage and should be expert inHydraulics. Experience inWrought alloys is preferable. Project workingExperience is additional weightage. JobProfile Ensureavailability of manpower, material and machine for the plant and supervise theachievement of production. Carryout daily reviews with supervisors to understand and calibrate production, ongoing challenges and provide solutions for improvement. Approvedaily work plans for the shop floor to achieve production targets. Superviseand coordinate with maintenance lead to ensure availability and healthiness ofmachine and ensure maintenance schedules are followed. Involvedwith supervisors in Improvement projects & quality circles. Contributeto new alloy developing process. Review5 weeks mix plan with unit PPC & find out constraints which we have faceduring making alloy as per mix plan. Coordinatewith quality and sales and marketing team to address customer related issues. Ensuremonthly data reconciliation for production, cost, dross reconciliation, manpower. Ensuresafety of the workplace in accordance with EHS norms. CoreCompetencies: Metallurgy Processengineering Quality standards Costconsciousness Effectivecommunication Teamwork Knowledge sharingand learning Planning andorganisation Executionexcellence Resultsorientation General Age -32- 45years. CTC 19 LPAapprox. Candidate shouldnot be frequent job changer. Notice Period-Joining period Max 30 Days. We can buy notice period, if required Location It is a project stage at Tirupati, Andhra Pradesh. It is 35 kms fromTirupati, 15 Kms from Srikalahasthi, 20 Kms from Venkatagiri.

Role & responsibilities Build 3D models and independently create drawings for pumps and motors, components using Creo adhering to standards and relevant guidelines. Creating Assemblies & Assembly Drawings with GD&T/Mfg. tolerances. Create exploded views of complete pumps and motors for product service teams Prepare/Update standards for use in manufacturing plant. Engineering change management execution. Preferred candidate profile Hands on experience in design and development of hydraulic products or mechanical components. Good knowledge in design and manufacturing of castings, forgings for hydraulic products or industrial applications. Ability to independently deliver models, drawings using CAD tools like Creo, Windchill (PDM), AutoCAD and SAP. Good overview of Manufacturing & Machining process. Good knowledge of GD&T, tolerance Stack up. Good communication and interpersonal skills.

Proven experience as a VC++ Developer or in a similar role. Strong understanding of Visual C++ and object-oriented programming principles. Experience in developing SDI,MDI,DIALOG based applications using MFC library. Design, develop, and maintain software applications using Visual C++. Collaborate with cross-functional teams to define software requirements and specifications. Perform debugging, troubleshooting, and bug-fixing activities. Experience in developing multithreaded applications. Experience in basiclinux shell programming / commands. Experience in using static code analysis tools like CAST. Experience in working with client server architecture. Experience with software development methodologies and best practices. Excellent problem-solving skills and attention to detail. Good communication and teamwork skills. Ability to work independently and as part of a team.

Job Overview We are seeking a dynamic leader to head our Quality Assurance functionoverseeing vendor, factory, and customer quality to ensure manufacturing processes align with business objectives on cost, quality, and delivery. Role & responsibilities: Establish Process-Driven Manufacturing Systems and Quality Management Systems (QMS) and procedures Ensure that the quality control procedures are implemented during every step of the production process. Plan and conduct internal quality audits. Establish and implement the Inspection and Test Plans Ensure the availability of required tools, including calibrated measuring equipment. Conduct Root Cause Analysis and implementing appropriate Corrective Actions and Preventive Actions. Collect of production data and conduct statistical analysis. Continuous process improvement using Lean and Six Sigma methods Coordination with Customer Support Team to ensure customer satisfaction. Preparation and Maintenance of Quality Management System documentation Lead a team of Quality Engineers and coordinate with third-party vendors and in-house manufacturing teams Define, track, and continuously improve key quality metrics Travel to supplier/vendor locations as needed Preferred candidate profile : Demonstrable experience in Manufacturing industry of leading quality function with a proven track record. Experience in Optical Metrology would be an advantage. Strong analytical and problem-solving skills. Knowledge and experience of using ERP systems. Thorough knowledge in manufacturing processes like fabrication, casting, machining, injection moulding & surface treatment. Experience with standard QMS software and statistical packages is preferred. Detail Oriented with strong analytical and problem-solving skills. Experience in planning and tracking quality activities Proven ability to lead cross-functional teams. Demonstrated ability to mentor and develop younger engineers. Strong stakeholder management and negotiation skills (with vendors, customers, and internal teams) Ethics Strong value systems and act as a role model for team members to emulate. Exposure to working in a startup/MSME environment will be highly desirable

Ensures that all products meet the required quality standards, conducting tests, inspections, and managing quality control processes within the production environment.

Ensures that all products meet the required quality standards, conducting tests, inspections, and managing quality control processes within the production environment.

We are looking for Iron Moulding supervisor(ARPA/DISA/RHINO/Hi pressure).Relevant field work experienced 2-8years ,Salary-15-28k Monthly at Howrah, Bardhhaman(WB). Who have worked EXP in SGI Foundry plant, please all apply. Contact : +91 7687919790

Cast Iron (GCI & SG) melting and casting process control operations of sand moulding and molten metal casting processes for the production of piston rings, sleeves, etc. contact: 9916086641 anamika@makevisionsoutsourcing.in