303 Casting Jobs - Page 12

Hi All, GE Aerospace is looking for Manager - Manufacturing Tool and Fixture Design Engineer for Pune location. Please share your CV to mahalaxmi.rahulghanekar@geaerospace.com Company Website - https://www.geaerospace.com Roles & Responsibilities Key words- customer order fullfilment, ERP, Inventory mgmt, problem solving Manage the Tool room operations and provide Fixtures/tools support to production team. Maintain on time delivery of fixtures/Tools to continue smooth operation. Prepare and maintain preventive Tool/Fixture maintenance and calibration plant to keep good health of tools/fixtures Maintain Fixtures/Tools consumable to avoid production delay. Maintain 100% traceability of each Tools/Fixtures to ensure smooth production People management to ensure shift wise production support Work with supplier to take support for Fixture/tool maintenance. Provide technical support to recover fixtures/tools deviations. Provide dispositions for fixture non-conformance. Maintain reports of the activities of the tooling department and Apprise Management on Regular basis. Identify the materials and equipments requirement for the functioning of Tooling department and raise request for the same in consultation with Management. Develop low cost automation solutions to support productivity and quality improvements. Support Robotics and Automations programs for Tubes & Ducts by developing necessary tools and fixtures and participate in projects. Calculations and target settings of tools for all current and new processes, support for cost analysis of tools for new projects Lead tooling team & guide suppliers on technical topics for new tool development Technical supplier assessment for technology & development regarding tooling quality, delivery reliability, problem management in co-operation with procurement team Monitoring tooling audits progress at supplier end & timely closure of open topics. Process monitoring for timely sampling inspection and production start-up at suppliers together with purchase and Quality team, potential preface of optimizations during development and series. Evaluation and modification in tools as suggested by the development department for customer projects as well as of series production. Dimensioning and optimization of current serial processes and new processes (tooling and process concepts). Evaluation and support of the purchase team for tooling re-locations. Main lead for the Tool buy off of tools at supplier end for new development and Refurbishment. Preparation of concept proposals regarding part design and part production regarding available procedures in the market i.e. product workshops. Implement best practices. Skillset: Hands on experience in Tool Design Engineer (Unigraphic Must, CATIA Optional ) Current Min 4 years, Press tool, Machining Fixtures, Fabrication Inspection Design, Manufacturing Processes, Tool Validation Qualification & Other requirements B Tech/BE / ME/ M-Tech - Mechanical/Production/Tool Engineering Certification in Tool design courses. 8-12 years Experience of which 4-7 years should have Fixture design, Stamping, Casting & Machining, Press Tool, Machining Fixtures Hands on Experience in Design and Manufacture of tools is a must using UG (Mandate), CATIA. Should be well versed with engineering drawings. (Geometrical Dimensioning & Tolerancing) Should have worked for the Aviation / General Manufacturing (Power, Oil Gas or Heavy Industry)/ automotive industry. Preferred software knowledge with forming technology (Analysis software like Pam- stamp) Trouble shooting during Trials is (necessary/must) to support our daily production and Project timings Desired Characteristics Humble: respectful, receptive, agile, eager to learn Transparent: shares critical information, speaks with candor, contributes constructively Focused: quick learner, strategically prioritizes work, committed Leadership ability: strong communicator, decision-maker, collaborative Problem solver: analytical-minded, challenges existing processes, critical thinker Strong oral and written communication, persuasive and presentation skills, including executive level communication About Us - GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. *Disclosure of your Gender or Sexual orientation is completely Voluntary and not mandatory.

Good exposure in manufacturing technologies like Plastics, Sheet metal, Casting, Injection molding, forging and fabrication Knowledge of Heat & Surface Treatments process/ costing Should able to identify alternate manufacturing technologies and alternate materials. Should be good at Optimizing the best manufacturing process techniques. -Strong background in VAVE & bench marking. Knowledge on conventional and CNC machines, manufacturing processes & time calculations. Experience in product estimation and costing tools like DFMA & will be added advantage. Carryout should costing and Design to Cost analysis for New Product Introduction (NPI) and Legacy Recommend improvements to cost competitiveness

Strong understanding of geometric compatibility, digital pre-assembly, and powertrain design principles. Proficiency in GD&T. Experience in VSA/Stack-up analysis. Experience in PLM tools. Proactive and willing to take on responsibilities.

Entity:- Accenture Industry X umlautPractice:- AutomotiveTitle:- Engineering Services Analyst 11Role:- Design Engineer - R&D-TransmissionJob location:- HoshiarpurAbout Industry X:- Industry X combines Accenture's powerful digital capabilities with deep engineering and manufacturing expertise. We use the power of data and digital to help our clients reimagine the products they make, and how they make them. By connecting engineering and manufacturing operations every step of the way - from how products are designed and engineered, sourced and supplied, manufactured, to how they are serviced and renewed, we help them achieve greater productivity, drive growth and meet their sustainability commitments.Know more:- www.youtube.com/watch?v=XaLxTEI3atI WHAT'S IN IT FOR YOU? Accenture offers number of programs that help our employees balance a successful career with a healthy lifestyle involving family, friends, and community. Endless opportunities in Accenture Industry X. Need to work in an organization where you will get medical coverage, Employee life insurance, Dependent life insurance, Financial Rewards and Perks, Time off / flexibility and many moreWhat you would do in this role Responsible for the Design and Development of Tractor transmission systems. Experience in in Automotive/Tractor/Offroad Vehicles Design Part and Integration on Uni-Graphics Software 3D modelling of parts Casting, Forging, Gears, Shafts and Transmission components. Part drawing, Assembly Drawing and Specification release as per organization Standard practice. Collaborate with cross-functional teams to review and resolve design and manufacturing issues. Apply standards and methodologies to arrive at robust design solutions. Evaluate and select materials for transmission components considering performance, cost, and manufacturability. Make concept layout of Transmission, Driveline assembly and Sub assembly. Perform analytical calculations for mechanical transmission parts such as gears, shafts, shifting systems, and bearing selection. Good understanding of Gear Design & Calculation, Stack-Up Analysis and General Dimensioning & Tolerances Analysis the issue/Problem and find out the solution by using the best design practice like stack-up Analysis, etc. Co-ordinate with inter-departments of New Assembly operation for manufacturing & Validation and resolve issues with Process Team Follow up with External/internal stakeholders for design Reviews. Able to guide and help the people working in the same team. Qualification Who are we looking for? 2-5 years of Experience in Automotive/Offroad Vehicle Transmission Systems. Knowledge of GD & T, Tolerances fit and standards. Others:Good communication, Sound mind, eager to learn new technology, Adaptable, Punctual, hardworking, MS-office Accenture is an equal opportunities employer and welcomes applications from all sections of society and does not discriminate on grounds of race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, or any other basis as protected by applicable law.

Job Summary: Supports software and hardware technologies in an engineering environment, develops, supports, and administers engineering processes and systems. Key Responsibilities: Assist with the installation of software and resolve licensing/access control issues. Resolve helpdesk tickets and provide customer support with installations, training, and application support for assigned products. Support major systems changes and implementations of new hardware and software. Maintain a mid-level understanding and capability for support of Windows or UNIX operating systems interfaces. Participate in cross-functional reviews; collect and tabulate metrics; gather data using Six Sigma tools; schedule tracking systems and other process improvement tools. Take corrective actions based on problem reports and change requests to ensure high-quality software products. Interface with customers, suppliers, engineers, and other functions. Assist with the coordination of engineering systems development including planning, scheduling, ordering, and tracking. Participate in improvement projects. Participate in self- and team-audits and associated corrective actions. Perform other duties as required. Key Competencies: Technical Expertise: Proficient in the use of CGT Windchill, CREO (casting/sheet metal). Aware of AutoCAD software, can read part drawings and create assemblies, drawings in CREO. Aware of GD&T and have good product knowledge. Stakeholder Interaction: Ability to interact with stakeholders, understand the scope of work, and deliver that work within the stated time. ASME Standards: Understanding of ASME Standards for drawings and maintaining good drawing RFT. Software Proficiency: Hands-on experience with Creo, AutoCAD, and Windchill. Alternator Product Knowledge: Understanding of alternator products and their applications.

Job Description : Catia software knowledge Auto Cad Solid work Automotive sector must be known Known of designing of casting, surfacing and modeling.

Good to have Automobile back ground More exposure in surface/Casting modelling Please go through below link to get more information about this position : https://forms.gle/3YjB7KzXMpFxWJaT6 Required Candidate profile Role: Design Engineer Industry Type: Automobile Department: Research & Development Employment Type: Full Time, Permanent Role Category: Engineering & Manufacturing

Negotiate contracts and agreements with suppliers and vendors to ensure favourable terms and conditions Manage relationships with suppliers and vendors to ensure timely delivery of goods and services Experience in documentation as per IATF standard. Required Candidate profile Experience of sourcing / purchase / vendor development in Automotive industry Experience of documentation ( DFM/PFMEA/PPAP/APQP) Knowledge of SPC/MSA/7QC tools Experience of costing of machining parts

Role & responsibilities Plan, schedule and monitor material movement in production cycle to ensure continuous operation without any line stoppage. Plan Monitor inventory and production status and generate inventory against production report for the senior management. Evaluate quality control activities in sheet metal park like edge damages, burrs, surface defects, oxides,identification error etc to ensure that the final product meets customer specifications. Ensuring Smooth operation of Cold rolling mill along with all the finishing line. Setting up operation parameters and achieving the same within time and cost parameters. Optimising man & machine utilisation to achieve pre-set operation and production targets. Developing new process concepts for production optimization, yield improvement. Handling foundry operation, which includes DC & CC route casting. Working on New Product Development for Aluminium alloy. Analysing various processes/applications and recommending modifications to enhance operational efficiency. Coordinating the health and safety issues of manpower working in production and at job worker in the form of safety helmets, goggles, shoes, approan , leg guard ,face shield, ear plug and safety gloves to avoid any safety hazard. Overseeing operation related tasks including planning, control and trouble shooting. Execution of Strategy for entry into New Product segments, onboarding and building new Product Portfolios Directing staff activities and monitoring their performance on shift to shift basis. Preferred candidate profile B.E /Btech - Mechanical/Metallurgy with 10-15 Years of Experience. Must have experience in Aluminium Flat rolled products, Power Coating Etc. Perks and benefits Best in Industry

PROCUREMENT , SOURCING, CASTING, FORGING, MACHINED PARTS, INDUSTRIAL CONSUMABLE, NEW PRODUCT DEVELOPMENT, PARTS OF VALVES COMPONENTS, ALL PARTS, SCM, STORES, INVENTORY Required Candidate profile DME/BTECH/BE (MECH) WITH 4-8 YEARS EXP IN SOURCING/ PROCUREMENT/ CASTING/FORGING/ MACHINED PARTS/ CONTROL VALVES INDUSTRY---SAP/ KNOWLEDGE OF TAMIL

Roles and Responsibilities: As a Sourcing engineer castings; you are responsible for evaluating, maintaining, managing and optimizing the process and product quality of the suppliers. You are responsible for complete development of casting products with suppliers which includes commercial negotiations as well as product quality maintenance. Visit Supplier base check parts as per AC required std. mentioned on drawing Investigate the quality issues with regular visits/audits and follow-up of the agreed improvement actions Provide solutions for quality improvements in part / product development. Review quality specifications and technical design documents and provide timely and meaningful feedback. Estimating, prioritizing, planning and coordinating activities with suppliers according to production / project execution requirements Identify quality issues, record & document it thoroughly and keep track. Communicating with project manager about existing defects and how to prevent them in future products Applying technical skills related to the product being tested. Ready for extensive travel within India . Educational requirements: University degree in Engineering/Technology (Mechanical) Fluent in English Knowledge: Technical expertise in solving quality related issues for castings, ,machining , fabrication All types of casting process GDC / PDC / HPDC /sand casting etc. Sound Knowledge of patterns making , casting process and casting defects Good Command over ERP Systems, knowledge of SAP is added advantage. Proficient in Microsoft Office (esp. MS Word & MS Excel). Good Command (Verbal & Written) of English is must. Knowledge of Engineered rotatory equipment is added advantage. Plan & organize effectively with the right sense of urgency. Able to work on multiple tasks by giving due importance to each task. Personality requirements: Pro-active, positive team player with good interpersonal skills, strong in communication and people oriented who thrives on working in a dynamic, complex, and multicultural business environment. Be able to adapt in a new environment. Strong interpersonal communication Self-motivated, independent, flexible, well organized, and methodical. Accurate and diligent with an awareness to speed up execution within a pressurized environment. Customer oriented: to be able to establish relations and networks with people inside and outside the organization. Result driven: have a drive for results which means that you put in the ambition and the effort to achieve results and accept accountability. Have a customer centric mindset. Creativity: Ability to come up with solutions to exceptional problems outside the box. Experience: 5-6 Years of experience in Sourcing / Quality domain preferably having experience working with Castings, machining & fabrication commodities. If you are interested in this opening, kindly share your updated CV at pacificheadhunter@gmail.com

PAVNA INDUSTRIES LIMITED is looking for Pressure DIE Casting (Operator - Supervisor) to join our dynamic team and embark on a rewarding career journey Supervise and manage daily operations and staff. Ensure compliance with company policies and regulations. Monitor and report on performance metrics and KPIs. Collaborate with cross-functional teams on business initiatives. Provide training and support to team members. Maintain accurate records of operations and activities. Good Communication, Supervision, Team Leading Experience supervising/coaching staff Strong analytical skills Assertive, Self Confident and Team player Positive Attitude Takes pride in their work Ability to work Independently leadership skills for getting work done, persuasive Well Groomed

Qualification : B.E / B. Tech in Mech/ Production Engineering. Job Description : Experienced in manufacturing process with strong understanding of manufacturing drawings & metallurgy. The profile will interface with OEMs & indigenous manufacturers to achieve localisation of components in India. Responsible to ensure that the locally produced component will meet all quality specifications of OEM. Required Skills : Demonstrated ability to understand OEM manufacturing drawings and processes including metallurgy, casting, machining & Stress relieving Able to fluently communicate in English (written & spoken) Age Limit / Age Range: Not more than 35 years Min Exp : Minimum 10 years experience in manufacturing industry . Experience in Quality control in a manufacturing company of engineering / automobile industry will be an added advantage Location of posting : Navi Mumbai Please share following details on shubhada@aarviencon.com Total yrs of experience Relevant experience Current CTC Expected CTC Notice Period Current Location Regards: HR Shubhada shubhada@aarviencon.com

Very important skill required on Heavy Castings. Experience of Third party inspection is must. Must be married and either already staying at Bhiwadi or willing to relocate with Family. Required Candidate profile Candidate must be computer savvy, should have knowledge of CAD, Drawings, Dimensional inspection, UT Testing , Ultrasonic testing, Radiography, MPI & Quality system.

+ Strong Experience in forging, machining and Heat Treatment + Knowledge on IATF, PPAP, CAPA, Root Cause analysis, Continuous Improvements, Poke Yoke, Cost reduction, QMS and GD & T + Quality Control Line Inspector and Rejection Control Required Candidate profile + Customer complaint handling , Engineering changes & customer coordination + Single point of contact of supplier for post technical discussions and development activities

Required Gravity Die Casting Operator Education required : 10th, 12th, ITI, BA, BSc, Bcom Diploma, BE, B.tech candidates not prefered

Handling procurement of all the raw material like heavy casting, heavy forging, procurement, execution of power plant project zero based costing plan for components / equipment in line with the project requirements Raw Material -Unit Bought Out Required Candidate profile BE in Mechanical Engineering or equivalent post order activities like arranging the drawing & all other documents improve cost position through value engineering, innovation in SCM processes

Galatta Media is looking for Show Producer - Political & Current Affairs to join our dynamic team and embark on a rewarding career journey. Project Management: Plan, organize, and manage the entire production process, from concept development to final delivery Budgeting and Financing: Secure funding, create budgets, and manage financial resources to ensure the project stays within financial parameters Creative Direction: Collaborate with creative teams to shape the artistic and creative vision of the project, ensuring it aligns with the intended goals Scheduling: Develop and manage production schedules, ensuring that milestones are met and deadlines are adhered to Casting and Talent Management: Oversee casting decisions and manage relationships with actors, performers, or contributors Logistics and Coordination: Coordinate logistics such as location scouting, equipment, crew, and transportation Negotiation: Negotiate contracts, licensing agreements, and rights acquisitions for content, music, or intellectual property Problem-Solving: Address unexpected challenges and troubleshoot issues that arise during production

Primary responsibilities: Timely, accurately and efficiently complete parent company monthly reporting. Ensure smooth month close process & preparation of key and non-Key GL account reconciliation. Well versed with Control, casting, cross referencing and proof reading of Standalone and Consolidated Financials. Knowledge of Related Party Transactions, Eliminations and its reporting. Pro-active team member to support Finance and Business in smooth functioning. Basic knowledge of Companies Act and SEBI LODR compliances will be an advantage. Qualification: M.com, B. com, Intermediate Chartered Accountant with 4 – 5 years of experience. Well versed in working as “Team player” and co-ordination with internal/ external stakeholders. Technical skills required: Good knowledge of general ledger accounting and reconciliation Good knowledge of MS Excel & Working knowledge of Oracle Fusion will be an advantage Ownership of accounting ERP and manage developments in ERP. Soft skills required Good communication and strong interpersonal skills and ability to interact with senior/ junior internal stakeholders & auditors Highly organized, structured & proactive Good inter-cultural skills & Exposure to global work environment Good time management skills - meet tight timelines and manage adhoc deliverables, if any Quick learner

Age: - 25 – 35 yrs Qualification: - ITI or CPET, (Tool Room- Die making) Aluminum, Casting & PDC, Die fitting, New Die Assembly, Rectification Knowledge, EDM & surface grinding, drilling. Salary: - 25000 to 30000 /- Experience: - 4-7 yrs 9119766620

Position :Sr. Manager Metallurgy Location:Rajkot ( Gujarat ) Experience :12 Years above Qualification:BE Metallurgy Knowledge ofSteel Manufacturing Processes.Heat Treatment Processes,Casting ,Forging ,Welding Metallurgical Laboratory.VAVE projects

you?ll be Aligned with: Head - Product Costing & Budgeting you?ll be the member of: Costing & Budgeting ? Team What you?ll do at Ather: Lead New Program Costing and Budgeting Activities Identify cost reduction/optimization opportunities across all cost drivers that add to the gross margin (part cost, assembly cost, logistics cost, packaging cost and so on) Collaborate with cross-functional teams (engineering, sourcing, manufacturing, Product , Finance) to integrate cost considerations into the product development lifecycle. Perform detailed cost analysis on new designs, identifying key cost drivers while maintaining a Design to Cost approach and facilitate trade-off decisions to optimize product cost. Assess and influence design decisions across teams to optimize the bill of materials (BOM) cost for new, redesigned, or conceptual parts and assemblies. Develop and implement cost targets for new programs. Prepare budgets for NPD program costs (Capex,Opex) Monitor and track product costs throughout the development process and report on variances. Apply first principles thinking in all cross-functional financial decisions and activities Here?s what we are looking for: BE Mechanical / Electrical / Mechatronics with 10-15 years of experience in product companies and adept in agile way of working. Good understanding of manufacturing processes like casting, machining, forging, injection moulding, sheet metal operations, fabrication, compression moulding, coating, welding etc Basic understanding of electronics and electrical systems and their functions Exposure to PCBA and wire harness manufacturing process and should costing is a plus Well versed with product development process/lifecycle in a hardware company and involvement of commercial decision-making in every step Adept at should costing/zero based costing - ability to prepare detailed costing for a part/assembly BOM preparation and understanding of EBOM or MBOM Ability to financially assess projects and activities in swim lanes (cross functions) and be the Finance vertical representative in swim lanes Experience in zero based budgeting for NPD program costs (Capex,Opex) Strong analytical and problem-solving skills Excellent communication and interpersonal skills Ability to work in an agile environment.

Understand customer requirements Good skills in preparing documentation like QAP, PFMEA, Process records etc Supplier evaluation Customer interaction and support Casting, Forging and Machining knowledge Inspections at various stages Able to train the team in all quality aspects Maintaining quality records till warranty period Detailed knowledge in ISO, IATF, IRIS is added advantage

We are looking for a minimum 5 years’ experience for engineer position. Must have exposure to various metal cutting processes in automotive industry. Hands on experience in turning & milling will be an advantage.

Maintain quality control processes and systems. Supplier quality management Conduct inspections, audits Analyze quality data/ implement corrective actions Solving techniques and statistical process controls QMS compliance MIS