Good Knowledge of communication protocol - CAN, LIN, Ethernet, XCP. Knowledge of automotive diagnostic standards and protocols (e.g. UDS, ODX, OTX, ...) • Knowledge on CDD/ODX development and verification. HIL Tester with CanoeDIVA

Prime Indian Hospitals is looking for Doctors (Specialists & Consultants) to join our dynamic team and embark on a rewarding career journey We are seeking highly skilled and compassionate specialists and consultants to join our growing medical team. You will provide expert medical care and contribute to a positive patient experience. Responsibilities Provide high-quality patient care. Diagnose and treat medical conditions. Collaborate with other healthcare professionals. Maintain accurate patient records. Participate in continuing medical education. Qualifications Medical Degree (MD or DO). Board certification in relevant specialty. Excellent communication and interpersonal skills. Strong diagnostic and treatment skills. Current medical license.

Required Skills & Experience: 5-10 years of experience in embedded systems testing. Strong experience with automotive protocols such as CAN, LIN, UDS, FlexRay. Good exposure to industrial communication protocols such as Modbus, Profibus, Profinet, Ethernet/IP, OPC UA. Proficient in using CAN tools like CANoe, CANalyzer, CAPL scripting. Experience with test management tools such as JIRA, HP ALM, or TestRail. Hands-on experience in test automation scripting (preferably Python). Good understanding of embedded software architecture and icrocontroller/microprocessor-based systems. Familiarity with Agile/Scrum methodologies. Educational Qualification: Bachelors or Masters degree in Electronics/Electrical/Instrumentation/Computer Science Engineering or related fields. Preferred Qualifications (Good to Have): ISTQB Certification. Exposure to HIL testing tools like dSPACE or NI Veristand. Experience in automotive diagnostics and ECU validation. Familiarity with safety-critical systems (ISO 26262 or IEC 61508). Work Location: Pune (Hybrid/Onsite based on project needs) Notice Period: Immediate to 30 Days preferred

Job Description: Excellent embedded C and C++ programming with debugging skills Working knowledge on Power PC and ARM based architectures, Microcontrollers like Xilinx and TI Jacinto processors etc. Knowledge in Classic & Adaptive AUTOSAR SW platform and AUTOSAR methodologies AUTOSAR BSW integration , ASR tools and configuration exposure Working knowledge in Linux/QNX platforms Knowledge of CAN, LIN, J1939, DoIP, UDS protocols Knowledge on EE architecture. Knowledge on Service Oriented Architectures Exposure to tools: Debuggers, CANalyzer, CANoe, Quality tools (MISRA) Knowledge on CI/CD with Jenkin, Gradle and Klocwork etc Experience in SAFe and Agile SW development. Take ownership and delivery on the AUTOSAR SW platform Lead the team members in Embedded SW platform development Embedded software Integration with AUTOSAR platform Execute and deliver according to SAFE PI Objectives. Interested, Kindly share your profile to Rafik_Raja@onwardgroup.com Regards, Rafik Raja S Onward Technologies

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients throughout the product lifecycle. Roles & Responsibilities: 6-8 years of experience in embedded software development using C++. Strong C++ (99,11,14 and 17) standards. Work Experience of Application SW, drivers, BSP, OS, middle ware software unit tests, tests the software to verify functionality using various testing tools. Professional & Technical Skills: Experienced in Linux/QNX or any other Real Time Operating System Experience of AUTOSAR and Vector tool chain Ex:GENy, Candela Studio, Configurator Pro. Experience of CAN (e.g. J1939) protocol, Canalyzer and CANOE. Experience in ECU Diagnostics using ISO14229 – UDS on CAN protocol. Additional Information: The candidate should have a minimum of 7.5 years of experience in Automotive ECU Software This position is based at our Bengaluru office A 15 years full time education is required Qualifications 15 years full time education

Job Title - S&C Global Network - Strategy - MC - Industry X - Digital Engineering R&D Manager Management Level: 11-Analyst Location: Bangalore, Gurgaon, Pune, Mumbai,HYD Must-have skills: Product Compliance/R&D/Enovia/Delmia/3DX/Teamcenter Good to have skills: Ability to leverage design thinking, business process optimization, and stakeholder management skills. Job Summary : This role involves driving strategic initiatives, managing business transformations, and leveraging industry expertise to create value-driven solutions. Roles & Responsibilities: Provide strategic advisory services, conduct market research, and develop data-driven recommendations to enhance business performance. The Practice - A Brief Sketch: Our clients are experiencing massive disruption as products are being reinvented intelligent and connected enough to be autonomous, sustainable for a low impact onthe environment and designed to create delightful customer outcomes. At the same time, our clients seek to transform and drive new growth by leveraging platformsand network economies. These forces combine to rapidly increase our clients' reliance on software, platforms, new skillsets, and modern operating models vital to successful execution. Product organizations must transform their engineering capability to addressthe rapid growth of and increasing reliance on software. We help clients reimagine their operating model, processes, toolchains, structures, talent, behaviours, and ways of working. We are unique in that we have the capabilitiesto "do modern product development" while we help our clients transform. At Capability Network (CN), we create 360 value and empower organizations to be ready for whatever the future holds. Through , we embed intelligence with an eye on the future of products, platform development, manufacturing, and operations. About the Role:- We are looking for a Techno-Functional expert and System Architect with expertise in Auto, Digital Products, Consumer Electronics - including all aspects of the technology stack. Should be an excellent communicator with proven ability to engage with all program stakeholders in both the business and technology domains, from C-level executives to vendor engineering delivery teams. The incumbent should be comfortable at working at all levels of product and project delivery from customer proposals and business development, through specification and architecture, development, and deployment Professional & Technical Skills: - Relevant experience in the required domain. - Strong analytical, problem-solving, and communication skills. - Ability to work in a fast-paced, dynamic environment. Primary Skills: - Engineering Transformation: Manage how organizations create and deliver products and services across the product lifecycle. Hands on experience in one or more of the following tools:Atlassian - Jira, IBM Rational / Jazz, PTC Integrity, Siemens Polariton, MathWorks Simulink, Dassault No magic/ Cameo and space HIL. Additionally, desired skills around Model Based System Engineering, Hardware-in-the-loop simulations & Functional Safety Engineering and Industry specific skills; like Automotive Software Performance Improvement and Capability determination (ASPICE) standards and Stages for managing engineering processes Embedded Systems Engineering: Develop innovative embedded solutions and have a good understanding of Embedded Systems/ Applications:uC/uP/DSP - ARM9&11,Cortex, Adruino, Rasberry PI, SOC from Atmel, NXP,TI and others, Device protocols viz. GPIO, SPI, I2C, CAN, SDCARD interfacing, interfacing with various sensors and smart sensors Platform Services : Design and implement end-to-end smart connected solutions on IOT & edge platforms such as Microsoft Azure, AWS, PTC Thingworx, GCP, SAP Leonardo etc. Leverage AI / ML services for predictive / prescriptive modelling and advanced analytics. Good to have skills:- Mobility Services: Experience in smart solutions such as shareable digital devices, over-the-air upgrades, connected vehicles and associated platforms, remote-control, fleet management, multi-modal transport for automotive and/or transportation domain (incl. electric vehicles / fleets) Product Management: Transform Product Strategies, Product Management, and overall engineering by enabling portfolio alignment with overall business strategy, right products mix with optimal resource utilization and better governance thereby ensuring increased product success Additional Information: - Opportunity to work on innovative projects. - Career growth and leadership exposure. Qualifications Experience: 2+ yrs Educational Qualification: Any Degree

• Experience in Automotive/Transportation domain Preferably with Body and Powertrain domains • Experience in HILS like dSPACE, NI, Vector VT etc • Good Scripting - CAPL, Python • Expertise in System Integration Testing and System Qualification Testing • Automotive protocols CAN/LIN/Ethernet/UDS/OBD/NM • ASPICE, quality management and Functional safety for testing • Very good communication and mentoring skills

SUMMARY Vehicle Technician We are seeking a skilled Vehicle Technician to carry out vehicle repairs in compliance with company standards. The ideal candidate will be responsible for diagnosing and rectifying faults in vehicle systems, as well as performing maintenance and installation of additional equipment. Responsibilities: Adhering to company guidelines while repairing vehicles Conducting measurements, tests, and diagnostics on passenger car systems Performing maintenance and repairs on customer vehicles Installing additional equipment as required Requirements Requirements: Proven experience as a Vehicle Technician or similar role Certification in automotive technology or a related field Strong diagnostic and problem-solving skills Ability to work efficiently and accurately Excellent attention to detail and safety standards Benefits Benefits Candidates must provide visa, police check, English test results, qualifications, and medical check results before starting the job. Language Training: English proficiency required. Employment Contract: Initial contract within 72 hours. Follow-up contract and starter pack provided upon receipt of visa/confirmation of start date. Working Hours: Standard 38 hours per week. Shifts may vary by site. Holidays: 20 paid holidays per year, as per contract. Minimum Commitment: Length of visa is up to 2 years. Consequences for leaving before commitment period: Loss of visa. Salary: Estimated between $7200 to $9800/PA . Bonuses and incentives include VGA incentive program, shift, and tool allowance. Cost of Visa: Covered by Volvo. Job Location: Various locations across Brisbane, Gold Coast, Newcastle, Blacktown, and Prestons. Start Earning: Salary starts upon commencement with no delay. Probationary period: 6 months. Flight Cost: Initial flights covered by the company. Reimbursement policies for travel expenses available.

Project Role : Security Architect Project Role Description : Define the cloud security framework and architecture, ensuring it meets the business requirements and performance goals. Document the implementation of the cloud security controls and transition to cloud security-managed operations. Must have skills : Product Security Good to have skills : Security Architecture Design Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Automotive Cybersecurity Engineer, you will implement and validate security controls across in-vehicle systems, ensuring protection of ECUs, telematics units, and connected vehicle infrastructure. You will contribute to threat modeling and diagnostics hardening efforts, support penetration testing activities, and document the integration of cybersecurity measures in alignment with regulatory and technical requirements. Roles & Responsibilities: Support the development and implementation of cybersecurity controls across ECUs, telematics systems, and in-vehicle networks in alignment with ISO/SAE 21434 and company CSMS. Participate in security architecture and design reviews, contributing to the definition and validation of security requirements for embedded vehicle systems. Conduct and document threat modeling and risk assessments using methodologies such as HEAVENS, STRIDE, and custom attack graphs. Perform penetration testing and intrusion validation on in-vehicle protocols including CAN, DoIP, and Ethernet, as well as wireless interfaces such as Bluetooth and Wi-Fi. Assist in the execution of fuzz testing and vulnerability analysis using tools like CANoe, Wireshark, Scapy, and Python-based custom scripts. Contribute to the validation of secure boot mechanisms and assist in reverse engineering activities to verify firmware security compliance. Work with software and hardware teams to analyze security issues, identify root causes, and define corrective actions and mitigations. Maintain operational documentation, including test procedures, vulnerability logs, and mitigation tracking in compliance with regulatory requirements. Collaborate with cross-functional teams to integrate secure diagnostics, access control strategies, and key management protocols. Participate in internal assessments and support audit readiness for cybersecurity compliance frameworks such as UNECE WP.29 and ISO 26262. Professional & Technical Skills: Experience supporting in-vehicle cybersecurity programs with 8+ years in embedded or automotive systems development, including 3–4 years focused on penetration testing, diagnostics security, or secure ECU architecture. Hands-on experience conducting security testing and vulnerability assessments on vehicle communication interfaces such as CAN, DoIP, and Ethernet, as well as wireless protocols including Bluetooth, Wi-Fi, and cellular. Strong working knowledge of UDS diagnostics (ISO 14229), secure diagnostics access control, and protocol fuzzing techniques to uncover vulnerabilities in ECUs and vehicle gateways. Proficiency with security testing tools and platforms such as CANoe, Wireshark, Scapy, Python, and Ghidra for traffic analysis, custom scripting, and reverse engineering. Familiarity with cryptographic principles and practical usage of cryptographic libraries (e.g., OpenSSL, mbedTLS) and hardware security modules (HSM) for secure key storage, boot processes, and firmware authentication. Experience supporting OTA (Over-the-Air) update platforms and ensuring their secure integration using encryption, authentication, and rollback protection mechanisms. Exposure to cybersecurity development in Agile-based or V-model automotive environments, working collaboratively with software, systems, and validation teams. Knowledge of regulatory and compliance standards relevant to automotive cybersecurity, including ISO/SAE 21434, UNECE WP.29 (R155/R156), and functional safety (ISO 26262). Ability to document test cases, generate detailed security analysis reports, and provide engineering teams with clear recommendations and follow-up actions for mitigation. Demonstrated problem-solving skills and the ability to troubleshoot complex issues related to embedded systems security, communication integrity, and control system protection. Additional Information: 5+ years' experience implementing and performing Automotive Cybersecurity Experience with AUTOSAR (Classic/Adaptive), ECU firmware security, or secure telematics units. This position is based at our Bengaluru office A 15-year full-time education is required Good to have Certifications in ISO 21434, CISSP, CEH, OSCP, GICSP Qualification 15 years full time education

Project Role : Security Architect Project Role Description : Define the cloud security framework and architecture, ensuring it meets the business requirements and performance goals. Document the implementation of the cloud security controls and transition to cloud security-managed operations. Must have skills : Product Security Good to have skills : Security Architecture Design Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Automotive Cybersecurity Specialist, you will support the implementation and validation of security measures across vehicle systems and embedded platforms. You will assist in penetration testing, contribute to threat analysis activities, and help ensure secure communication and firmware integrity in alignment with automotive cybersecurity standards. Roles & Responsibilities: Assist in the execution of penetration testing activities targeting ECUs, in-vehicle communication networks, and diagnostic services to identify common vulnerabilities and misconfigurations. Support the use of automotive security tools such as CANoe, Wireshark, Scapy, and basic fuzzing frameworks to simulate attacks and gather system responses for analysis. Collect and organize logs, analyze test outputs, and document findings to assist senior security engineers in remediation and tracking of identified issues. Execute validation of standard UDS diagnostic services, including support for testing access controls, session management, and secure diagnostic configurations. Participate in asset identification and support foundational threat modeling efforts, including contributing to risk assessments and mitigation tracking under guidance. Assist in documenting security design considerations and implementation steps in alignment with ISO/SAE 21434 and internal cybersecurity processes. Collaborate with cybersecurity, software, and validation teams to support the integration of security controls across vehicle platforms. Continuously learn and apply core concepts of automotive cybersecurity, including secure communication, ECU hardening, and regulatory standards like WP.29 and ISO 26262. Professional & Technical Skills: 5+ years of experience in embedded systems, automotive engineering, or related fields, with growing specialization in cybersecurity principles and practices. Familiarity with in-vehicle communication protocols including CAN, UDS, and DoIP, with hands-on exposure to using tools such as CANoe, Wireshark, and Scapy for traffic analysis and basic attack simulation. Foundational understanding of penetration testing methodologies, vulnerability identification, and the use of fuzzers to evaluate ECU communication robustness. Exposure to diagnostics security concepts, including secure diagnostic sessions, seed-key mechanisms, and access control layers for UDS services. Basic knowledge of cybersecurity frameworks and risk assessment methodologies such as STRIDE, HEAVENS, and ISO/SAE 21434. Experience contributing to documentation of test results, secure design inputs, and mitigation reports under guidance from senior cybersecurity engineers. Understanding of secure firmware update concepts and cryptographic basics, including symmetric/asymmetric encryption, HSM usage, and key management fundamentals. Experience working in Agile or V-model development environments, collaborating with cross-functional teams including validation, software, and systems engineering. Demonstrated eagerness to learn new cybersecurity tools, standards, and technologies relevant to modern connected vehicle platforms. Strong analytical skills and attention to detail, with the ability to follow structured testing and security validation procedures. Additional Information: 3+ years' experience implementing and performing Automotive Cybersecurity Knowledge of tools like CANoe, Wireshark, or Ghidra. Basic understanding of ISO 21434, seed/key security, OTA updates, and cryptographic modules. This position is based at our Bengaluru office A 15-year full-time education is required Good to have Certifications in ISO 21434, CISSP, CEH, OSCP, GICSP Qualification 15 years full time education

Project Role : Security Architect Project Role Description : Define the cloud security framework and architecture, ensuring it meets the business requirements and performance goals. Document the implementation of the cloud security controls and transition to cloud security-managed operations. Must have skills : Product Security Good to have skills : Security Architecture Design Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Automotive Cybersecurity Specialist, you will support the implementation and validation of security measures across vehicle systems and embedded platforms. You will assist in penetration testing, contribute to threat analysis activities, and help ensure secure communication and firmware integrity in alignment with automotive cybersecurity standards. Roles & Responsibilities: Assist in the execution of penetration testing activities targeting ECUs, in-vehicle communication networks, and diagnostic services to identify common vulnerabilities and misconfigurations. Support the use of automotive security tools such as CANoe, Wireshark, Scapy, and basic fuzzing frameworks to simulate attacks and gather system responses for analysis. Collect and organize logs, analyze test outputs, and document findings to assist senior security engineers in remediation and tracking of identified issues. Execute validation of standard UDS diagnostic services, including support for testing access controls, session management, and secure diagnostic configurations. Participate in asset identification and support foundational threat modeling efforts, including contributing to risk assessments and mitigation tracking under guidance. Assist in documenting security design considerations and implementation steps in alignment with ISO/SAE 21434 and internal cybersecurity processes. Collaborate with cybersecurity, software, and validation teams to support the integration of security controls across vehicle platforms. Continuously learn and apply core concepts of automotive cybersecurity, including secure communication, ECU hardening, and regulatory standards like WP.29 and ISO 26262. Professional & Technical Skills: 5+ years of experience in embedded systems, automotive engineering, or related fields, with growing specialization in cybersecurity principles and practices. Familiarity with in-vehicle communication protocols including CAN, UDS, and DoIP, with hands-on exposure to using tools such as CANoe, Wireshark, and Scapy for traffic analysis and basic attack simulation. Foundational understanding of penetration testing methodologies, vulnerability identification, and the use of fuzzers to evaluate ECU communication robustness. Exposure to diagnostics security concepts, including secure diagnostic sessions, seed-key mechanisms, and access control layers for UDS services. Basic knowledge of cybersecurity frameworks and risk assessment methodologies such as STRIDE, HEAVENS, and ISO/SAE 21434. Experience contributing to documentation of test results, secure design inputs, and mitigation reports under guidance from senior cybersecurity engineers. Understanding of secure firmware update concepts and cryptographic basics, including symmetric/asymmetric encryption, HSM usage, and key management fundamentals. Experience working in Agile or V-model development environments, collaborating with cross-functional teams including validation, software, and systems engineering. Demonstrated eagerness to learn new cybersecurity tools, standards, and technologies relevant to modern connected vehicle platforms. Strong analytical skills and attention to detail, with the ability to follow structured testing and security validation procedures. Additional Information: 3+ years' experience implementing and performing Automotive Cybersecurity Knowledge of tools like CANoe, Wireshark, or Ghidra. Basic understanding of ISO 21434, seed/key security, OTA updates, and cryptographic modules. This position is based at our Bengaluru office A 15-year full-time education is required Good to have Certifications in ISO 21434, CISSP, CEH, OSCP, GICSP Qualification 15 years full time education

We at TATA ELXSI hiring candidates with 10+ yrs for Bengaluru location for below requirement. Please apply with updated resume if interested. JD- Design & development Test strategy and test Automation for Validation of EE Automotive systems such as Body Electronics, Inverter, Charging, etc - Analyzing the requirements and developing test specifications & test scripts - Execution of tests, analyzing results and reporting bugs - Validation of ECU using tools such as CANoe, Canalyser and Vehicle Spy - Coordination skills within team and external parties - Experience in any Bug Tracking Tool ( Jira is Preferred) - Contribute to developing a validation strategy and test plan to find issues in a fail early, fail often manner and the reporting mechanism to ensure that issues are tracked and fixed on time. - Contribute to the building of Test Simulation setup to improve productivity and effectiveness of the early architecture validation effort. - Perform IVN & Diagnostic validation

Experience in automotive domain. Strong knowledge and skills on Cybersecurity software features development phases like Requirement Analysis, creating Proposals, Planning, deliverables execution, etc. Development experience in Autosar Crypto stack Required Candidate profile Automotive Security concepts, Sec-OC, HSM, AutoSAR Crypto Stack, Secure Boot, Secure Flashing, Debugging.

Description: Same as above Requirements: Performance/ Competency Manager - Infotainment Domain Bachelor’s degree in Engineering, Electronics/Electrical, Computer Science, or a related field. • 8- 12 years of experience in Automotive Project management, People Management. • Proficiency with project management tools like Jira. * Familiar with Agile methodologies. • Proven experience in managing project budgets, financial forecasts, and cost control. • Excellent leadership, communication, and negotiation skills. • End to End Recruitments & Competency Development for infotainment domain ,Stakeholder Management,Dashboard & Reporting . Job Responsibilities: same as a bove What We Offer: Exciting Projects: We focus on industries like High-Tech, communication, media, healthcare, retail and telecom. Our customer list is full of fantastic global brands and leaders who love what we build for them. Collaborative Environment: You Can expand your skills by collaborating with a diverse team of highly talented people in an open, laidback environment — or even abroad in one of our global centers or client facilities! Work-Life Balance: GlobalLogic prioritizes work-life balance, which is why we offer flexible work schedules, opportunities to work from home, and paid time off and holidays. Professional Development: Our dedicated Learning & Development team regularly organizes Communication skills training(GL Vantage, Toast Master),Stress Management program, professional certifications, and technical and soft skill trainings. Excellent Benefits: We provide our employees with competitive salaries, family medical insurance, Group Term Life Insurance, Group Personal Accident Insurance , NPS(National Pension Scheme ), Periodic health awareness program, extended maternity leave, annual performance bonuses, and referral bonuses. Fun Perks: We want you to love where you work, which is why we host sports events, cultural activities, offer food on subsidies rates, Corporate parties. Our vibrant offices also include dedicated GL Zones, rooftop decks and GL Club where you can drink coffee or tea with your colleagues over a game of table and offer discounts for popular stores and restaurants!

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: Details: Expected to individually triage stability issues Possess good analytical / problem solving skills Possess good C, Python programming skills and awareness of operating system concepts is a basic prerequisite MS-DOS, Linux commands, batch, shell programming basics Have awareness of any debugger (such as gdb / Trace32 etc) usage / fundamentals of any processor architecture and peripherals Prior experience to debugging embedded systems and C++ programming skill would be an added advantage Skills/keywords Triage, Debugging, RTOS, Trace32, Stability, OS concepts, computer architectur Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc.

Job Area: Engineering Services Group, Engineering Services Group > Support Engineering General Summary: As a Support Engineer at Qualcomm, you will significantly contribute to our product improvement and work with other Engineers to sustain aspects of our product development life cycle. Support Engineers will also play a critical role in resolving technical system issues that promote product reliability. You will have endless opportunities to learn and grow in the Engineering development space. Minimum Qualifications: Bachelor's degree and 1+ year of Support Engineering or related work experience. OR Associate's degree and 2+ years of Support Engineering or related work experience. OR High School Diploma or equivalent and 3+ years of Support Engineering or related work experience. *Completed advanced degree in a relevant field may be substituted for up to one year (Master"™s = one year) of work experience. You will be part of Qualcomm's Automotive Platform Systems Team in Bangalore, which is responsible for design, delivery and support of high-quality Chipset validation, integration and SW development platforms. In this role, the primary responsibility of the individual will be to work closely with platform design engineers in testing, troubleshooting, deploying, maintaining and supporting Qualcomm"™s Automotive platforms. Support tickets raised by users of these platforms will have to be resolved by the individual "“ either on their own or in collaboration with adjacent functions (HW Design/Manufacturing/Test/Prototype rework teams.) Individual may work on multiple tickets at any point of time, so, systematic tracking and updating of status is expected. The environment is fast-paced and requires cross-functional interaction daily. Good communication, planning and execution skills are a must. Following are the required skills and experience: - Ability to understand Schematics, component datasheets, BOM, Engineering Drawings- Ability to debug electronic HW systems, write board-level rework instructions and guide technicians to implement and verify rework- Ability to operate test equipment "“ power supplies, oscilloscopes and logic analyzers, protocol analyzers etc. - Working knowledge in Windows required - Knowledge of using JTAG debuggers preferred- Working knowledge in Unix is desirable - Experience in a support role and working with ticket tracking tools (like JIRA) desirable - Experience in running automated tests and ability to perform first-level debug in test / test-environment related issues is a strong plus - Strong individual contributor who will work well in a team environment - Good communication skills Qualifications: MinimumDiploma in Electrical/Electronics Engineering and 8+ years of experience in Electronic System Assembly, Test, Troubleshooting, lab support and system maintenance

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients throughout the product lifecycle. Roles & Responsibilities: 6-8 years of experience in embedded software development using C++. Strong C++ (99,11,14 and 17) standards. Work Experience of Application SW, drivers, BSP, OS, middle ware software unit tests, tests the software to verify functionality using various testing tools. Professional & Technical Skills: Experienced in Linux/QNX or any other Real Time Operating System Experience of AUTOSAR and Vector tool chain Ex:GENy, Candela Studio, Configurator Pro. Experience of CAN (e.g. J1939) protocol, Canalyzer and CANOE. Experience in ECU Diagnostics using ISO14229 – UDS on CAN protocol. Additional Information: The candidate should have a minimum of 7.5 years of experience in Automotive ECU Software This position is based at our Bengaluru office A 15 years full time education is required Qualification 15 years full time education

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients in Hyderabad. You will lead a team in the end-to-end development process. Roles & Responsibilities: Develop and implement a comprehensive configuration management plan aligned with the project's ASPICE level. -Define configuration items (CIs), baselines, and change management processes. Manage change requests, ensuring they are evaluated, approved, and implemented in accordance with the change management process.-Implement and maintain a version control system for engineering artifacts. Ensure traceability between requirements, design, code, and test artifacts.-Conduct regular audits and reviews to ensure compliance with the configuration management plan and ASPICE standards.-Verify the integrity and traceability of engineering artifacts. Professional & Technical Skills: Strong understanding of configuration management principles and practices. Experience with ASPICE standards and methodologies.-Proficiency in configuration management tools (e.g., Git, SVN, Polarion) with MathWorks's products (MATLAB and Simulink).-Excellent organizational and analytical skills. Certification in ASPICE or a related standard. Additional Information: The candidate should have a minimum of 5 years of experience in Automotive ECU Software This position is based at our Hyderabad office A 15 years full time education is required Qualification 15 years full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. Your day will involve overseeing the application development process and ensuring seamless communication within the team and stakeholders. Roles & Responsibilities: Develop and implement a comprehensive configuration management plan aligned with the project's ASPICE level. -Define configuration items (CIs), baselines, and change management processes. Manage change requests, ensuring they are evaluated, approved, and implemented in accordance with the change management process.-Implement and maintain a version control system for engineering artifacts. Ensure traceability between requirements, design, code, and test artifacts.-Conduct regular audits and reviews to ensure compliance with the configuration management plan and ASPICE standards.-Verify the integrity and traceability of engineering artifacts. Professional & Technical Skills: Strong understanding of configuration management principles and practices. Experience with ASPICE standards and methodologies.-Proficiency in configuration management tools (e.g., Git, SVN, Polarion).-Excellent organizational and analytical skills.-Certification in ASPICE or a related standard. Additional Information: The candidate should have a minimum of 7.5 years of experience in Automotive ECU Software This position is based at our Hyderabad office A 15 years full-time education is required Qualification 15 years full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. Your day will involve overseeing the application development process and ensuring seamless communication within the team and stakeholders. Roles & Responsibilities: Create system requirements, modeling system architecture based on customer needs, contributing to platform architecture for project reusability, and collaborating with various teams like Algorithm and Hardware.-Develop comprehensive system architectures for automotive platforms, considering factors such as performance, reliability, scalability, and cost-effectiveness. Define interfaces and interactions between system components to ensure seamless integration.-Anticipate E/E software architecture trends in the automotive market to derive and extend the software architecture roadmap.-Ensure compliance with industry standards and regulations governing automotive systems, such as ISO 26262, AUTOSAR, and MISRA. Professional & Technical Skills: Knowledge of system design and software engineering principles in Automotive domain.-Familiarity with modeling tools like Enterprise Architect (SysML) and experience with requirements management tools such as Polarion.-Proficiency in communication protocols like SPI, I2C, CAN, LIN, MOST, and Automotive Video interfaces is beneficial. -Familiarity with agile development methodologies and tools (e.g., JIRA, Confluence) is a plus.-Certification in relevant automotive standards (e.g., ISO 26262 Functional Safety, ASPICE) is desirable. Additional Information: The candidate should have a minimum of 7.5 years of experience in Automotive ECU Software This position is based at our Hyderabad office A 15 years full-time education is required Qualification 15 years full time education

Job description Company Description: IntelliCredence is a global technology consulting and IT services company based in Bengaluru. We help enterprises innovate and scale with agility using cutting-edge technologies to gain a competitive edge. We have strong partnerships with global leaders in industries such as healthcare, retail, and manufacturing, and we provide innovative engagement models to drive our clients' growth. Note: Preferable candidate who can join within 15 days Total Experience: 4 to 6 Years Mandatory skills: Automative Domain,Infotainment,Selenium, API Job Profile: Automotive Domain(Infotainment), Automation Testing(Selenium) Role Description: This is a full-time on-site role for a Automation and API Testing in Automative Domain(Infotainment) position at IntelliCredence Pvt. Ltd. in Bengaluru. The role involves daily tasks related to testing API Automation Testing, ensuring quality and functionality. The candidate will be responsible for analyzing test cases, effective communication, and software testing to support the development process. Responsibilities Must have experience in automative domain Experience in Infotainment features(audio, video,navigation,GPS, connectivity and user interface ) Experience with automotive communication protocols (e.g., CAN, LIN, Ethernet) and connectivity technologies (Bluetooth, WiFi, Navigation, Cellular, V2X, vehicle testing). Develop detailed test plans, test cases, and test scripts for connected features (e.g., infotainment systems, telematics, V2X, mobile integration) in automotive environments. Experience with hardware-in-the-loop (HIL) testing or real-time simulation environments. Experience in Mobile App Security testing will be added advantage Develop and maintain automated test frameworks and scripts using industry-standard tools. Experience in mobile app performance and mobile app(IOS & Android) Analytical Skills and Test Case Management Experience in Software Testing and Test Engineering Strong Communication Skills for effective collaboration Knowledge in testing methodologies and practices Attention to detail and problem-solving abilities Experienced in Agile/Scrum SDLC & tools like JIRA, Confluence Good understanding of OOP principles, proficiency in Core Java & knowledge of Python scripting language Experienced in black-box & white-box testing methods and applying BDD practices Experienced with Automation tools (Selenium+Java/Python) for the development of automated tests across application layers (UI/Service/Data) Experienced to design/ develop/ maintain reusable/scalable Automation Test frameworks (POM, TestNG) Experience in Handling and leading the team Experience with BDD, gherkin language Familiar with Static code analysis, Code coverage analysis, Cross-browser testing, API testing & Test Data Management. Adhere to best practices/coding standards CI/CD working knowledge & tools like Jenkins, and GitHub. Experience with Web Services standards/technologies (HTML, XML, SOAP, JSON, REST, Junit) Ability to work independently in a high throughput environment, multi-task & handle multiple technology initiatives at the same time. Behavioural Attributes Excellent verbal communication skills and the ability to work collaboratively in a fast-paced environment. Strong analytical and problem-solving skills Excellent written & verbal communication skills Understanding of business processes Ability to gather and document business requirements Strong collaboration skills Strong analytical and problem solving skills Ability to work independently as well as with team Ability to handle multiple tasks and meet the deadlines. Good team player. Qualifications Bachelor's degree in Computer Science/IT (or related field) 4 to 6 years of relevant work experience Preferable candidate who has worked in Automobile and Manufacturing domain.

Skills : Hardware-In-Loop Benches (dSPACE/Opal RT/NI/ETAS etc.), Control Desk/Automation Desk/INCA, CAN/LIN Tools (CANoe/CANape /CANalyzer) Required Candidate profile Notice Period: Not Available Education: Not Available

Automotive Validation, Design & development Test strategy and test Automation for Validation of EE automotive system, Validation of ECU using tools such as CANoe, Canalyser and Vehicle Spy Required Candidate profile Notice Period: 0-90 days

Skills : Experience in HIL design, development, and commissioning (dSPACE or NI), Test Automation, System Testing ADAS, Body, or EV domain Required Candidate profile Notice Period: 0-90 days Domain: Automotive domain (mandatory) EducationB.E, B.Tech, MCA, M.E, M.Tech/M.Sc( Elec)

About The Role Experience in Model Based Software Development and Validation using Simulink and Stateflow Experience in MIL Testing and Bench Testing Good knowledge of MBSD best practices and optimization techniques An individual who can understand system requirements and design software architecture based on it Knowledge of SAE J1939 CAN protocol, UDS protocol, electrical diagnostics An individual who can work with minimal supervision and is a team player Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Skills (competencies) Verbal Communication