271 Canoe Jobs - Page 4

Project Role Application Lead Project Role Description Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills Automotive ECU Software Good to have skills NA Minimum 3 year(s) of experience is required Educational Qualification 15 years full time education SummaryAs a Firmware Engineer, develop, modify, and optimize algorithms for embedded systems, ensuring they run efficiently on resource-constrained devices. Roles and Responsibilities:1.Write firmware in C, C++, or assembly to implement algorithms on embedded devices, ensuring low-level hardware control. 2.Use profiling tools to measure the performance of firmware and optimize algorithms for speed, memory usage, and power consumption. 3.Work with hardware engineers to integrate algorithms with sensors and actuators.Professional & Technical Skills: 1.Minimum 3 years of experience in developing firmware for resource-constrained devices.2.Deep understanding of embedded systems architecture, including microcontrollers, microprocessors, and hardware interfaces. 3.Familiarity with real-time operating systems (RTOS) and hardware abstraction layers (HALs). 4.Proficient in low-level programming (e.g., C, C++, or Assembly) for embedded systems and MATLAB/Simulink. 5.Knowledge of memory management and resource constraints typical of embedded systems (e.g., limited RAM, storage, CPU). 6.Familiarity with algorithm optimization techniques specific to embedded hardware. 7.Understanding of hardware interfaces such as UART, SPI, I2C, GPIO, and ADCs/DACs to integrate algorithms with sensors and actuators.Additional Information:1.The candidate should have a minimum of 3 years of experience in Automotive ECU Software2.This position is based at our Hyderabad office3.A 15 years full time education is required (Bachelor of Engineering in Electronics, or any related stream.) Qualification 15 years full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. You will oversee the development process and ensure successful project delivery. Roles & Responsibilities: Audits processes and technically assessing safety related product. -Works autonomously across various projects. -Develops and delivers trainings at various levels on functional safety. -Takes responsibility for the functional and technical safety concepts. -Executes specific safety analyses (including HARA, FMEA, DFA, FTA, ..).-Develops functional safety plans, and safety case arguments/evidence. -Supports business development activities. Professional & Technical Skills: 7+ years' knowledge of systems engineering, embedded software (firmware development) and hardware electronics development, for safety related systems. -5+ years' experience of applying functional safety to automotive systems, preferably in the position of safety manager or coordinating a small team. -Knowledge in ISO 26262 is a must and knowledge in ISO PAS 21448, ISO SAE 21434, and ASPICE is a strong advantage. -Experience with specialist development and safety analysis tools such Polarion or DOORS, Enterprise Architect or Rhapsody and similar tools.-Excellent communication and collaboration skills.-Have well-developed analytical skills, a person who is rigorous but pragmatic, being able to justify decisions with solid rationale. Additional Information: The candidate should have a minimum of 5 years of experience in Automotive ECU Software This position is based at our Hyderabad office A 15 years full-time education is required Qualifications 15 years full time education

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients in Hyderabad. You will lead a team in the end-to-end software development process. Roles & Responsibilities: Design, plan, perform and document, system, hardware and software (embedded an cloud) tests of tire electronics and vehicle telematic systems-Design test equipment, maintain hardware in the loop system, vehicle CAN communication simulator, sensor simulator-Support product development and operation teams, join working group.-Work closely with external testing partners as well as the hardware and software developers to setup the right test plan to validate the new product features over all phases of engineering from System Design to continuous field monitoring. -Review supplier test strategy and contribute to standardization of development process, according standard like ASPICE. Professional & Technical Skills: -Proficiency in electronics testing -Proficiency in software programing language:Python, C/C Proficiency with testing tool of automotive vendors like DSPACE or VECTOR-Experience with BLE, WiFi and RF communication protocol -Experience with CAN/J1939, OBD-II and UDS-Experience with machine-to-machine protocols like MQTT, HTTP-Ability to carry out assignments in a logical fashion using existing technology standardized methods. Additional Information: The candidate should have a minimum of 5 years of experience in Automotive ECU Software This position is based at our Hyderabad office A 15 years full time education is required Qualifications 15 years full time education

Project Role Application Lead Project Role Description Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills Automotive ECU Software Good to have skills NA Minimum 5 year(s) of experience is required Educational Qualification 15 years full time education SummaryAs a Test Development Engineer, design test cases, develop validation framework, and ensure that the system requirements are effectively validated. Roles and Responsibilities:1.Analyze system requirements and develop structured test cases for validation. 2.Design and implement validation strategies to ensure robust testing methodologies. 3.Develop and refine test frameworks and automation techniques for efficient validation. 4.Work with physics-based models, simulation tools, and validation processes to improve testing effectiveness. 5.Support the development and validation of tire models.6.Perform test data review to ensure accuracy and completeness of validation results. 7.Utilize Dspace modeling for test environment setup and validation support. 8.Collaborate with cross-functional teams to identify potential issues, innovate test approaches, and enhance validation efficiency. 9.Document test strategies, procedures, and validation results to support continuous improvement. 10.Contribute to innovative approaches in validation, leveraging AI-driven techniques, automation, and advanced test methodologies.Professional & Technical Skills: 1.Minimum 7 years of experience in performing validation tests across systems and vehicles (preferably in ADAS domain).2.Experience with data analysis tools (MATLAB, Python, or similar). 3.Familiarity with simulation environments and test automation frameworks. 4.Experience with vehicle dynamics models and prior automotive industry knowledge. 5.Understanding of ASPICE, ISO 26262, and systems engineering processes. 6.Experience with JIRA and Polarion for test case management and validation tracking.7.Understanding of vehicle dynamics, test methodologies, and validation strategies. 8.Knowledge of tire modeling or vehicle physics-based modeling is a plus.Additional Information:1.The candidate should have a minimum of 5 years of experience in Automotive ECU Software2.This position is based at our Hyderabad office3.A 15 years full time education is required (Bachelor of Engineering in Electronics, or any related stream.) Qualification 15 years full time education

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. About ExcelHer program: Are you looking for an opportunity to restart your career? Do you want to work with an organization that would value your experience no matter when you gained them? How about working with the best minds in the transportation industry where we need more women power? We are pleased to launch the ExcelHer program - the career returnship program at Volvo Group in India. The program is for women who have been on a career break for a year or more . This is our step towards empowering women to relaunch their professional journey after their absence from the workplace due to personal commitments. Exciting work assignments have been identified which you can refer in the list below. The assignment is for a tenure of 9 months . The participant of this program would have access to professional development programs, mentoring assistance by a business leader, apart from the experience of working with people from different functions/technologies/culture. If youre ready to seize this opportunity and align your experience with our career-defining assignments, we invite you to apply today. What s it like to work with Volvo Group? The Volvo Group culture is defined by a set of five carefully chosen values- Customer success, Trust, Passion, Change, and Performance. These values guide our day-to-day behavior and drive our decision-making at all levels of the organization. They express our shared beliefs across countries and entities to form the basis for a high-performing culture that can help maximize the full potential of the organization. Our company values help guide us on that journey. . About Us: Group Trucks Technology is the largest R&D wing of Volvo group. We are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you ll help enable talent to engineer exciting next-gen technologies and contribute to projects that determine new, sustainable solutions.

Seeking a System Engineer with 5–7 yrs experience in EV systems, architecture, and validation. Must have hands-on with EV components, CAN tools, DOORS, DVP&R, and testing. Strong in problem-solving, communication, and technical documentation.

Role & responsibilities Experience in working with Automotive system like Bluetooth, Multimedia, Navigation, Telematics, Audio etc. (Infotainment and Cluster). Define system architecture and design system considering interfaces with sensors and actuators. Determine System requirements taking into consideration of both current and future system architectures. Define the performance requirements for the sensing system, establish feature model to operate with the sensor performance envelop. Sound knowledge of ECU internals HW architecture, SW architecture, Interface understanding. Should be able to perform Requirements Engineering. Ability to read and interpret technical specifications, use cases, standards and procedures. Prior experience with requirements management tool such as DOORS/ DOORS NG Experience system Modules like Tuner, Audio, HMI, Media, USB, BT, Navi, Voice Recognition, Power Modes, etc. Ability to read and interpret technical specifications, use cases, standards and procedures. Knowledge of vehicle electrical system and network architecture and vehicle functions . Knowledge of system and software test management methods and quality practices. Familiarity with tools such as Vector CANoe as well as ability to analyze and interpret test and diagnostic data from systems and vehicle. Ability to operate in project phases from planning to execution and reporting.

Mandatory Skills B.E in (Electronics & Communication only) Experience in Embedded software development in Automotive domainoHands on LIN, SPI, I2C and UART protocol KWP 2000, UDS Diagnostics Knowledge/Exposure to 8bit/16bit/32bit micro controllers Mandatory to have experience in development of motor drivers (MOSFETS and its diagnostics) (Microcontroller) An analytical mind with Ability to problem-solve and Eager to continually learn and improve Knowledge/Exposure to ASPICE framework Tools KEIL, SVN, Jira ,Vector Canoe Additional Skills Exposure to complete software development Life cycle. Experience in cyber security engineering in automotive domain. Experience in LIN related application development. Responsibilities oSoftware Requirement Analysis, Design and Development oParticipate and contribute for software architectural development oRoot cause analysis of an issue and provide a solution oUnit testing of the owned module oPerform static and dynamic analysis of the software oSoftware integration and testing oInteract and coordinate with Design Lead to ensure the on time delivery oMaintain positive external and internal customer satisfaction oEnable the learning within the team by doing knowledge sharing. oInnovation and continuous improvement within the competency. oWork and collaborate with cross cultural team. oCompliance to Inteva processes & guidelines ( ASPICE)

Client Server Tech is looking for Automotive Engineer to join our dynamic team and embark on a rewarding career journey. Vehicle Design: Collaborate with cross-functional teams to design and develop various vehicle components and systems, such as chassis, powertrain, suspension, and body structure Performance Optimization: Analyze and optimize vehicle performance, including aerodynamics, fuel efficiency, handling, safety, and emissions CAD Modeling: Create detailed computer-aided design (CAD) models and simulations of vehicle components and systems for analysis and testing Prototyping and Testing: Build and test prototypes of vehicle components and systems, collecting data and identifying opportunities for improvement Safety and Compliance: Ensure vehicle designs adhere to safety standards, regulations, and industry requirements, such as crash testing and emissions compliance Systems Integration: Integrate various vehicle systems, such as electronics, sensors, and control modules, to ensure seamless functionality and performance

Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications. 1. Applies scientific methods to analyse and solve software engineering problems. 2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance. 3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers. 4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities. 5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. - Grade Specific Is highly respected, experienced and trusted. Masters all phases of the software development lifecycle and applies innovation and industrialization. Shows a clear dedication and commitment to business objectives and responsibilities and to the group as a whole. Operates with no supervision in highly complex environments and takes responsibility for a substantial aspect of Capgeminis activity. Is able to manage difficult and complex situations calmly and professionally. Considers the bigger picture when making decisions and demonstrates a clear understanding of commercial and negotiating principles in less-easy situations. Focuses on developing long term partnerships with clients. Demonstrates leadership that balances business, technical and people objectives. Plays a significant part in the recruitment and development of people. Skills (competencies) Verbal Communication

Project Role : Software Development Engineer Project Role Description : Analyze, design, code and test multiple components of application code across one or more clients. Perform maintenance, enhancements and/or development work. Must have skills : Automotive Functional Safety Good to have skills : NAMinimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Functional Safety Engineer, you would work closely with the development teams (systems, hardware, embedded software, integration) to deliver successful results through robust, consistent process which is compliant with ISO 26262.Roles and Responsibilities:1.Audits processes and technically assessing safety related product. 2.Works autonomously across various projects. 3.Develops and delivers training at various levels in functional safety. 4.Takes responsibility for the functional and technical safety concepts. 5.Executes specific safety analyses (including HARA, FMEA, DFA, FTA, ..).6.Develops functional safety plans, and safety case arguments/evidence. 7.Supports business development activities. Professional & Technical Skills: 1.7+ years knowledge of systems engineering, embedded software (firmware development) and hardware electronics development, for safety related systems. 2.5+ years experience of applying functional safety to automotive systems, preferably in the position of safety manager or coordinating a small team. 3.Knowledge in ISO 26262 is a must and knowledge in ISO PAS 21448, ISO SAE 21434, and ASPICE is a strong advantage. 4.Experience with specialist development and safety analysis tools such Polarion or DOORS, Enterprise Architect or Rhapsody and similar tools.5.Have well-developed analytical skills, a person who is rigorous but pragmatic, being able to justify decisions with solid rationale Additional Information:1.The candidate should have a minimum of 7 years of experience in firmware development.2.This position is based at our Hyderabad office.3.A 15 years full time education is required (Bachelor of Engineering in Electronics, or any related stream) Qualification 15 years full time education

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Automotive ECU Software Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Test Engineer, you will play a critical role in ensuring the quality and functionality of our automotive software products, particularly those developed using the Simulink platform. Roles and Responsibilities:1.Develop/Test enhancements, bug fixes and new features for software applications. 2.Develop automated test procedures that can be run on the HIL and/or vehicle. 3.Execute verification and validation testing on time and with quality to meet program milestones. 4.Provide validation status to leadership and the appropriate project management. 5.Collaborate with algorithm design development engineers to improve algorithms. 6.Create validation and verification tests to ensure designs are of high quality. 7.Develop and document requirements required to design an automotive system. 8.Collaborate with other Test Engineers and share best.9.Integrate automated test suites in continuous integration (CI)/continuous development (CD) pipelines. Professional & Technical Skills: 1.5+ years experience required in automotive testing required. 2.Experience with HiL benches (e.g. dSPACE) and MathWorks tools like MATLAB, Simulink and Stateflow.3.Experience translating feature requirements into a test design and working automated test suites. 4.Working experience with automotive development process:A-Spice / ISO26262 / Scrum. Additional Information:1.Excellent communication and collaboration skills, with the ability to convey complex security concepts to non-technical stakeholders.2.This position is based at our Bengaluru office3.A 15 years full time education is required (Bachelor of Engineering in Electronics, or any related stream). Qualification 15 years full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Automotive ECU Software Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a scrum master you work with an Agile product team. You will need to create user stories, help decompose the work, estimate work effort, manage backlogs, and support all aspects of conducting meetings to support software development. Roles & Responsibilities:1.Apply Agile Product Management knowledge, skills, tools, and techniques to deliverables, processes, and systems to meet or exceed stakeholder needs and expectations. 2.Utilize agile methodology in the management of the scrum process while coordinating the activities of the scrum team. 3.Coach the team to reach higher and sustainable levels of performance and maturity. 4.Validate quality of scrum team deliverables while leading team effort in relentless improvement. 5.Manages and facilitates agile methodology within the team and organization flow, including running scrum, planning, demo and retrospective meetings, lead the decision-making processes to ensure quick inspection and proper use of adaptation process.6.Drives team iteration execution, communicates with management and stakeholders, protects the team from uncontrolled injection of work (changes are evaluated/intentional) Professional & Technical Skills: 1.Excellent communication, mediation and negotiation skills. 2.Strong project management skills. 3.Highly organized and detail oriented with the ability to manage multiple assignments. 4.Customer focused, sensitive to customer needs, their critical business cycles and schedule. 5.Ability to communicate and work well with team co-located across the globe.6.Excellent communication and collaboration skills, with the ability to convey complex security concepts to non-technical stakeholders Additional Information:1.The candidate should have a minimum of 5 years of experience in Product Management knowledge.2.This position is based at our Hyderabad office3.Bachelor of Engineering in Electronics, or any related stream. Qualification 15 years full time education

Qualification - B.Tech/B.E 1. Deep Expertise in programming embedded C++. 2. Experience with Adaptive Autosar 3. Ability to Review Code fulfilling automotive SW quality standards e.g. MISRA 4. Ability to analyze, interpret and maintain requirements, concepts, and specifications 5. Experience in taking ownership of legacy code and maintaining it 6. Experience in SW testing, e.g. unit tests, component tests, robustness, etc. 7. Fundamental knowledge of software architectures including multithreading 8. Experience in SW Debugging 9. Experience with Board net technologies such as Ethernet, SomeIP, CAN will be advantageous. 10. Knowledge of basic control system principles and controller design techniques 11. Effective communication and collaboration skills, including technical decisions documentation 12. Experience in the ADAS domain preferred. 13. Experience with GIT/CI. 14. Ability to work independently and take corresponding decisions.

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Edge Computing Good to have skills : Python (Programming Language) Minimum 12 year(s) of experience is required Educational Qualification : BE /BTech in MLAI or BE /BTech in any stream Post Graduation in MLAI Project Role :Application Lead Project Role Description :Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have Skills :Edge Computing, SSI: NON SSI:Good to Have Skills :SSI:Python (Programming Language), C++ Programming Language NON SSI :Job Requirements :Key Responsibilities : Proficient in Python/Go languages for versatile programming. Strong foundation in Embedded Linux (C/C++/Python) on various Embedded Linux platforms (Yocto, ROS, Ubuntu). Comprehensive knowledge of AI/ML frameworks for Edge Gateway Devices. Skilled in Connected Device Semantics, Streaming Data Analytics, and hands-on experience with Azure Stack Edge/AWS Snowball Edge for Edge computing solutions.Technical Experience :-Proficiency in architecting Mass OTA & FOTA solutions with either custom or OSS.-Practical experience in implementing Edge Model Monitoring & Management.-Expertise in defining Device Control and Security Lockdown policies for Edge Devices, specifically tailored for Yocto/Ubuntu/Android/Windows IoT Core. Professional Attributes :Must have good communications skills and ability to manage the team membersMust be able to produce clear and concise documentation including requirements documents, design specs, status reports, system documentation and emails Must have proven track record of technical leadership roles delivering sEducational Qualification:BE /BTech in MLAI or BE /BTech in any stream Post Graduation in MLAIAdditional Info :Connected Device Streaming data analytics Experience in Azure Stack Edge or AWS Snowball Edge Qualification BE /BTech in MLAI or BE /BTech in any stream Post Graduation in MLAI

Project Role : Software Development Lead Project Role Description : Develop and configure software systems either end-to-end or for a specific stage of product lifecycle. Apply knowledge of technologies, applications, methodologies, processes and tools to support a client, project or entity. Must have skills : Infotainment & Telematics Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Software Development Lead, you will be responsible for developing and configuring software systems, applying knowledge of technologies, methodologies, and tools to support projects or clients in Pune. Roles & Responsibilities: Expected to be an SME Collaborate and manage the team to perform Responsible for team decisions Engage with multiple teams and contribute on key decisions Provide solutions to problems for their immediate team and across multiple teams Lead the team in developing and configuring software systems Implement methodologies and processes to support project lifecycle stages Professional & Technical Skills: Must To Have Skills:Proficiency in Infotainment & Telematics Strong understanding of software development lifecycle Experience in configuring software systems Knowledge of technologies and applications in software development Hands-on experience in applying methodologies and tools for project support Additional Information: The candidate should have a minimum of 5 years of experience in Infotainment & Telematics This position is based at our Pune office A 15 years full time education is required Qualifications 15 years full time education

Dear Candidate, We are seeking a highly skilled and detail-oriented E&C - Verification. The ideal candidate will have hands-on experience in both manual and automated testing environments, with a strong background in embedded systems and ECU-level testing. Key Responsibilities: Preparation and setup of test environments (manual and automated test benches) Design and execution of test cases based on requirement documents Conducting bench testing, black-box testing, and functional testing Low-level embedded software testing including ECU board bring-up, debugging, and validation Simulation of ECUs using electronic components Hands-on usage of lab equipment such as multimeters, oscilloscopes, function generators, and load boxes Working knowledge of sensor and communication interfaces Strong understanding of communication protocols like CAN , J1939 , and Serial communication Proficiency in automotive software tools such as Vector CANalyzer / CANoe Scripting and automation knowledge using CAPL Development and maintenance of V&V plans and test cases Desired Candidate Profile: Experience in automotive ECU validation and testing Strong analytical and debugging skills Familiarity with industry-standard tools and protocols Passion for quality assurance and embedded system reliability Interested one`s can share their cv at swati.shikha@mounttalent.com or can reach me 9560495550.

Project description This opening is for a ADAS Domain Controller project for a prestigious OEM, where Luxoft is working with the OEM teams to deliver next generation Platform solution based on AUTOSAR Classic, AUTOSAR Adaptive and QNX working together as a system interacting with a host of cameras, ultra sound sensors, internal and external Radars. Luxoft is collaborating on Signal and Service Management, Diagnostics, SW Update, Vehicle Config, QNX/Middleware and Software Architecture areas with the OEM directly. Luxoft is expected to delivery quality and expert support in the above areas, drive topics independently, liaise with other OEM stake holders to remove blockers. The ideal candidate needs to have endless curiosity and can pair a global mindset with locally relevant execution. You should be a gritty problem solver, never give up attitude and self-starter who can think of out-of-box solution. The successful candidate will be a team player, display a balance of hard and soft skills, including the ability to respond quickly to Client's changing needs. Responsibilities Develop and derive the SWE6 validation strategy for the Diagnostics product. Test case creation for SWE6 Contribute through feedback on the SWE1 requirement maturity. Feedback to Unit testing and overall, SW development quality inputs TAMS/HIL rig management and capability addition Support simulation setup including CANoe. Test automation Scripting experience. Skills Must have Experience with Automotive HIL Testing, testing experience at SWE.5 and SWE.6 level Classic AUTOSAR Component and Integration Testing ASPICE Standard-based testing and traceability Vector CANOE and CANAPE based testing and simulation SIL Testing CAPL and Python automation CANTATA, GTEST or any Unit Testing tool usage Nice to have Have an open multi-brand and multi-cultural mindset Have good communication skills Have the ability to drive for results and take own initiatives and drive certain actions on your own leadership and empowerment Have excellent prioritization skills and ability to eliminate roadblocks Be business and customer-oriented Have an inspiring leadership and find it rewarding to manage co-workers to perform their best in a successful working climate Have a leadership characterized by managerial courage, a high level of integrity, & trust Other Languages EnglishB2 Upper Intermediate Seniority Regular

Key Responsibilities : EE Industrialisation Pilot - Analyse the EE failures on Harness, ECU, Software etc and pilot their resolution. Manage and maintain the ECU HW, SW, Calibration and Configuration for new projects. Manage weekly meeting to report all the EE issues and check countermeasure progress status with EE Stakeholders(Architect, Designers, Project management, VQA, Facility etc) Maintain the vehicle simulation bench - Plan and procure the components, software required for new models. Study the capability of VEP/EOL facility and coordinate the changes for new models. Train line operators of the plant to perform 1st level EE failure analysis. Skills Required: Strong knowledge about vehicle electrical diagnostics and Diagnostic tools (CLIP, Consult, DDT2000, Scanners, CANALYZER) Strong Knowledge on communication protocols like CAN, K-line, UDS. Experience in Vehicle/ECU level Calibration, configuration and Software flashing using diagnostic tools Experience in Vehicle EE problem solving, Ability to identify design issues is preferred. Ability to handle test devices/Measuring equipment like DAS, Oscilloscope, CANALYZER, Recorder Knowledge about CAN message interpretation (CAN Database) Experience in HIL testing, Test bench creation, Vehicle simulation bench etc. Experience in Installation of EOL facility Experience in maintaining the EOL server and manage the data flow

MANDATORY SKILLS : Bootloader,Embedded C,Autosar Mandatory Hands-On experience with ISO14229 (UDS Protocol) Mandatory experience on Flash Bootloader topics Mandatory Embedded C Programming Hands on Experience with software development tools like CAN Analyzer, Canoe, Debugger. Ability to solve technical issues independently. Exposure to Vector Flash Boot Loader would be added advantage. Exposure on OTA would be added advantage. Exposure to ASPICE Process would be added advantage. Good analytical and communication skills. Job Responsibilities The candidate will be involved in tasks related to Integration Development of FBL Features and performing testing activity. For the Integration Development of FBL software, the roles and responsibilities will include continuous collaborations with counterparts in Germany to understand requirements, interpret and develop FBL Features. Also, need to be responsible to create test specifications and document the results.

Responsible for Sales Target achievement of all the divisions (TAM) Responsible for maintaining desired Reagents & Equipment Ratio Responsible to drive the activities resulting to secondary sales such as UCP/UCV, % BCL Coverage, Roadshows, Demo Campaign, CMEs and Conference Participations Responsible for the regular reporting in CRM. Responsible for driving the leads and funnel management in the allocated region. Ensuring implementation of all the marketing strategies in the assigned territory. Responsible for good financial discipline in the territory. Ensuring successful launch of all the new products in the territory. Ensuring liquidation of short shelf-life products as per given guidelines. Ensuring knowledge enhancement by self-learning and all the training programs conducted by the company. Ensuring to keep the marketing team updated regarding the competitors activities in the assigned territory. Ensuring timely submissions of Sales and Closing Statement.

Mandatory skills- Arduino, ESP, Teensy or similar Preferred- CANALYZER, CANOE, Busmaster Immediate joiners only Job mode- Internship, Freelancing, Full-time. Apply here- https://www.techlanz.com/Careers_apply chiraag@techlanz.com / 9880855088

Looking for atleast 5+ years of experience in Automotive industry Proven experiences in test automation for embedded products in automotive Proficient in Python programming and preferably experienced working with Robot Frameworks. Experienced in the use of Vector tools CANalyzer, CANoe and CAPL. Knowledge in communication protocols CAN, LIN, FlexRay, Ethernet. Knowledge in setup and operations of HIL and SIL technologies Knowledge of and experience from embedded Software You architect automation testing solutions to cover test objectives from software tests up to integrated system tests on virtual and physical embedded targets. You offer automation testing solutions as a platform allowing the development teams to provide and run their application-specific tests in the CI/CD pipeline and independent of CI/CD pipeline. Lead in designing and operating efficient test automation. Experience in offering automation testing solutions as a platform service. Knowledge in any one of the following areas: Work with testing and implementation of automated/manual testing on Complete Vehicle Electronics System level to secure both BaseTech (SWDL, network management etc.) and customer function. Testing in Boxcar and HIL. Work with testing and implementation of automated/manual testing on SW and System level to secure ADAS, Brake, Suspension & Steering functionality. Testing in HIL, Boxcar. Work with testing and implementation of automated/manual testing on System level to secure the quality for the Connectivity area. Testing in HIL, Boxcar Mandatory Key Skills CI/CD,HIL,CANalyzer,CANoe,CAPL,ADAS,SWDL,network management,manual testing,Test Engineering*

MANDATORY SKILLS: Embedded C,Autosar,Ethernet Mandatory: Hands-On experience on Ethernet stack integration/Development Mandatory: experience on Ethernet switch topics Mandatory: Embedded C Programming Mandatory: Having experience on Marvell Ethernet Switch (88Q5050/88Q5XXX). Hands on Experience with software development tools like CAN Analyzer, Canoe, Debugger. Ability to solve the technical issues independently. Having experience on Groovy or any scripting would be added advantage. Exposure to ASPICE Process would be added advantage. Good analytical and communication skills Job Responsibilities The candidate will be involved in tasks related to Integration Development of FBL Features and performing testing activity. For the Integration Development of FBL software, the roles and responsibilities will include continuous collaborations with counterparts in Germany to understand requirements, interpret and develop FBL Features. Also, need to be responsible to create test specifications and document the results. Keywords Ethernet,Marvell Ethernet Switch,CAN Analyzer,Canoe,Debugger,Embedded C*,Autosar*

1. SWQT (and SWIT optional) 3-5years experience Skills. 2. Working experience on CANoe, CANAlyze CANDiva, vFlash tools and PTC. 3. Must have good knowledge on UDS and CAN/CANFD protocols. 4.Hands on experience with SW QT. 5. CAPL scripting experience with debugger (Lauterbach and iSystem) and VtestStudio. 6. Test Cases development. 7. Test Cases automation. 8. Test execution-Experience of all ASPICE defined Test disciplines of SWE5.0 and SWE6.0 9. Deep understanding of Software Testing Tool VTest Studio and CANOE. 10. Understanding of SW and SYS architecture and must have ADAS domain knowledge. 11. Good to have ISTQB-FL Certified Tester.