154 Can Jobs - Page 6

1. BOM management, Layout work standards. 2 design and automation, equipment development knowledge is preferred. a) PCB artwork program. (b) PCB Design 2 layer.(c) Schematic design using Orcad. (d) Simulation using Spice. (e) CAN/LIN Communication. Required Candidate profile 3.Good knowledge of Process control knowledge & Process Improvement. 4. Good knowledge of Jig Management, capacity analysis, Process design, Production facility management.

Develops RTL Designs within environments that have constrained timing and memory resources, designs and implements reusable code, performs design and code reviews, as well as tests and validates product implementations. Understanding of high-level software requirements and low-level software requirements. Capable of developing software verification test cases and test procedures. Analyse and enhance the efficiency, stability, and scalability of system resources. Good understanding of the embedded systems serial protocols (UART/ USB/SPI/i2C/ CAN Integrate and validate new product designs. Support software QA and optimize I/O performance. Provide post-production support. Interface with hardware design and development. Improve system efficiency and stability after development. Collaborate with customers to create systems based on their needs Requirements and skills: Bachelors degree in Electrical/Electronics/ Computer Engineering, Computer Science or a related field. Hands on Exp in RTL design in Verilog, VHDL, ASIC/FPGA experience If ASIC experience, then Lint/CDC tool experience If FPGA experience, then Xilinx or Altera/Intel , Microsemi FPGA parts and tools RTL debug experience Knowledge of at least one industry standard protocols like I2C/SPI/UART, PCIe, MIPI, AXI, Ethernet Adequate knowledge of reading schematics and data sheets for components. Strong interpersonal and writing skills. Ability to work as part of a team and as an individual. Exceptional analytical and problem-solving skills. Self-motivated and passionate about work and embedded systems.

Lighting Electronics Engineer Pune, PES JOB DESCRIPTION • 5 years of experience in Automotive Lighting Electronics domain. • Good Communication & Presentation skills. • Front/Rear/Interior Lighting Electronics design and calculations. • Project Co-ordination, Timeline & Cost management. • Knowledge of various communication Protocols such as, K Line, CAN, IIC,SCI, SPI, etc • Hardware simulations, Thermal Management. • Knowledge about Microcontroller such as Freescale, Renesas, Microchip, Infineon, etc. • Understanding of HW design Software such as Orcad, Eagle, Autodesk, PSpice configuration and version management. • eBOM, Cost estimation. • Sys Plan (wire harness routing) & Connectors. • EMI/EMC. • Basic knowledge in Functional safety, ISO26262 Compatible Design, Software Development process. • Basic Knowledge about ASPICE compliance s/w development. • BCM parametrization from Lamp functionality requirement perspective. • Light/Rain sensor parametrization. • Advance Forward lighting System (AFS) Electronics parametrization. • Component level testing, Environmental, EMC Testing, Mechanical testing, etc. • Vehicle level testing from Lamp system integration perspective. • Hardware In Loop (HIL ) test to simulate vehicle conditions. • Knowledge about Volkswagen Vehicle Electrical System Development Process (VOBES) is an added advantage. #LI-DNI

Role & responsibilities Strong grasp on the basic concepts of Electrical and Electronics. Battery Management System Knowledge (Preferable). Good knowledge on CAN, CAN FD, ethernet protocol and experience in Vector Tools CAN, CANoe, Extensive experience in automotive electronics/electrical Hardware in Loop(HiL) validation in an OEM or Tier-1/2 environment. Hands-on Python experience for HIL library/GUI development in automated validation. Good understanding of functionality of S/W development and validation, system/interface specification and Test case methodologies.

We are seeking a skilled Model-Based Design (MBD) Engineer. The candidate will be responsible for developing and validating Battery Management System (BMS) models using MATLAB/Simulink, implementing Model-Based Design (MBD) methodologies, BMS Role.

Dominic Lewis has been mandated to hire for Embedded SW Engineer. Candidate must have good knowledge in mobile radio technologies (5G, 4G, 802.11p, C-V2X) and embedded systems. Knowledge of formal processes and software quality standards such as SPICE, CMMI, ISO 16949. Good experience in C++ or Python. Should be from the automotive industry.

Seeking a Senior Test & Automation Engineer for IoT telematics QA. Must have expertise in automation, scripting, and embedded testing for telematics solutions.

EMBED SQUARE SOLUTIONS PVT. LTD. We are seeking a passionate and highly motivated Embedded Linux Developer to join our dynamic team. The successful candidate will be responsible for designing, developing, and maintaining embedded Linux-based systems and applications. This role requires a deep understanding of Linux operating systems, strong programming skills, and the ability to work collaboratively with crossfunctional teams . Job Position : Embedded Linux Developer (Mid Senior/Senior) Company Name : Embed Square Solutions Pvt. Ltd. Location : Pune Work Experience : 3-8 years of relevant professional experience Educational Qualificatio n: - Bachelors degree in Computer science/ Electrical engineering Required Professional Experience : - • 3 to 8 years of hands-on experience in Embedded Linux development. • Proven expertise in embedded systems design with pre-emptive, multitasking real-time operating systems. • Preferred: Experience in the Automative domain. Technical Skills (must have) : - • Strong programming experience in C/C++ • Familiarity with Linux Kernal development, including kernel debugging and device drivers • Knowledge of microprocessor and microcontroller architectures. • Experience with software configuration management tools, defect tracking tools, and peer review • Understanding of Linux system architecture and ability to develop, compile and peer review • Understanding of Linux system architecture and ability to develop, compile, and debug Linux Kernel modules. • Good to Have : Knowledge of automative protocols (e.g., CAN, LIN) and power electronics. Key Responsibilities: - • Collaborate with the engineering team to design, develop, and test embedded systems solutions for our projects • Design and write the embedded software as per the project requirements • Utilize C or C++ programming languages to write, debug, and maintain software for embedded systems applications • Assist in integrating software with electronic hardware components and sensors, ensuring seamless functionality • Should be ready to imbibe in the Startup culture & work in collaboration. Apply Today! If you meet the above requirements and are excited about this opportunity, please send your resume to hr@embedsquare.com THANK YOU! www.embeds2.com

Embedded Software Architect - Autosar Help shape the future of mobility. Imagine a world with zero vehicle accidents, zero vehicle emissions, and wireless vehicle connectivity all around us. Every day, we move closer to making that world a reality. Aptivs passionate team of engineers and developers creates advanced safety systems, high-performance electrification solutions and data connectivity solutions so that automakers can bring advanced capabilities to more people around the globe. This is how we enable sustainable mobility and help to prevent accidents caused by human error. Want to join us? Your Role Responsible for Design, Development of SW using Embedded C on 16/32 bit micro controllers / SOCs Responsible to understand Autosar architecture and be able develop SW for Autosar platform Lead the team of engineers in technical aspects. Expertise in C++ is an advantage. Understanding of Micro-controller and SOC low level peripherals. Responsible for Static Analysis, Unit Testing, Integration Testing and Qualification testing of the SW on HW platform Support Peer Review of work products like Design Documents, Code, Test Cases/results etc. Coordinating with cross regional teams as needed to achieve project objectives ASPICE Process compliance - Development work to be adhere to ASPICE Level 3 compliance for all categories SWE1 to SWE6 Manage embedded software requirements using tools like DOORS/Polarion ensuring traceability and alignment with project goals and customer needs Your Background Key ingredients for succeeding in this role are your: Required qualification: BE/B.Tech/ME/M.Tech in Software, Electricals, Electronics, Instrumentation, Information Technology or Telecommunication. Experience of 8-11 years in embedded systems software development using C/C++ on 16/32 bit microcontrollers and SOCs. Integrate embedded software development activities into the automotive product development process, following established procedures and standards such as AUTOSAR and ASPICE Strong Experience on Classical Autosar, BSW configuration, ARXML integration and development. Knowledge of different communication protocols like CAN-FD, Ethernet, I2C, SPI etc. Knowledge and Experience on AUTOSAR standard, AUTOSAR configuration tools (Vector DaVinci tool chain preferred). Good programming skills in Embedded C and C++. Good knowledge of Micro-controllers (RH850, Aurix) and SOCs (TI, Qualcomm, Nvidia). Knowledge on Requirements Engineering, Traceability and experience using any of the requirement engineering tools such as DOORS, Polarion Experience using the measurement/testing tools CANoe, Trace32, MiniWiggler, Lauterbach Excellent debugging, analytical, logical and communication skills Develop embedded software for ADAS products using the ASPICE SDLC model Experience working in Agile-Scrum/Kanban development process Cooperate closely with OEMs, Test Engineers and Product Owners Experience with ISO-26262 and Cyber Security

Your Role We are looking for Technical Autosar Developer whose role is to work on Active Safety projects . Collaborate with cross functional teams to bring innovation or overcome the obstacles of the owned modules. Develop Autosar based Embedded SW development for Safety products to be used in various global OEM vehicles. Define and/or optimize Autosar based SW Architectures in multicore environment Your Background Key ingredients for succeeding in this role are your: Preferred Bachelors degree or Masters degree in engineering discipline (IT/EE/EC/CS/Instrumentation/Robotics). Preferably looking for candidates with 8+ Years of Experience. Hands on experience in Autosar methodologies and workflows Sound understanding of embedded SW development using C on 16/32 bit microcontrollers Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture Automotive Product Development Process knowledge (Aspice, ISO26262) Experience in one or more of Autosar BSW Modules stacks Comstack (Flex ray, CAN, LIN, Ethernet)Memory Stack , Diagnostic stack ,OS, Wdg, other services Autosar based Embedded Software Development for Safety products following ASPICE compliance processes Responsible for all SW development life cycle phases Requirement Analysis, Design, Coding & Testing/Verification Setup and configure Autosar BSW Modules Expertise in defining SW architectures for throughput, Memory footprint and scalability. Experience in realizing ISO26262 Technical Safety Concepts - RAM test, ROM test, Lock step, CPU test, MPU, OS configurations for multicore architectures would be big plus Experience in RTE generation, make environments, multi-party SW integration

MANDATORY SKILLS Plant modeling in Simulink environment PREFERRED SKILLS ECU JOB DESCRIPTION Simulink ,m-Scripting, Python (Mandatory) Create vECU on Synopsys Silver(Mandatory) CAN, LIN , FlexRay/ Automotive Ethernet Matlab/Simulink, Silver,CANoe

Want to join us? Your Role Responsible for Design, Development of SW using Embedded C on 16/32 bit micro controllers Responsible to understand AutoSar architecture and be able develop SW for AutoSar platform Responsible for Static Analysis, Unit Testing, Integration Testing and Qualification testing of the SW on HW platform Support Peer Review of work products like Design Documents, Code, Test Cases/results etc. Coordinating with cross regional teams as needed to achieve project objectives ASPICE Process compliance - Development work to be adhere to ASPICE Level 3 compliance for all categories SWE1 to SWE6 Manage embedded software requirements using tools like DOORS/Polarion ensuring traceability and alignment with project goals and customer needs Your Background Key ingredients for succeeding in this role are your: Required qualification: BE/B.Tech/ME/M.Tech in Software, Electricals, Electronics, Instrumentation, Information Technology or Telecommunication. Experience of 8-10 years in embedded systems software development using C on 16/32 bit microcontrollers Integrate embedded software development activities into the automotive product development process, following established procedures and standards such as AUTOSAR and ASPICE Strong Experience on Autosar, BSW configuration, ARXML integration and development. Knowledge on OEM specific service implementation. Knowledge and Experience on AUTOSAR standard, AUTOSAR configuration tools (Vector Configurator DaVinci preferred). Good programming skill in C language. Knowledge on Requirements Engineering, Traceability and experience using any of the requirement engineering tools such as DOORS, Polarion Experience using the measurement/testing tools CANoe, Trace32, MiniWiggler, Lauterbach Excellent debugging, analytical, logical and communication skills Develop embedded software for ADAS products using the ASPICE SDLC model Experience working in Agile-Scrum/Kanban development process Cooperate closely with Test Engineers and Product Owners

Your Role We are looking for Autosar Developer whose role is to work on Active Safety projects . Collaborate with cross functional teams to bring innovation or overcome the obstacles of the owned modules. Develop Autosar based Embedded SW development for Safety products to be used in various global OEM vehicles. Define and/or optimize Autosar based SW Architectures in multicore environment Preferably looking for candidates with 6-10 Years of Experience. Your Background Key ingredients for succeeding in this role are your: Preferred Bachelors degree or Masters degree in engineering discipline (IT/EE/EC/CS/Instrumentation/Robotics). Hands on experience in Autosar methodologies and workflows Sound understanding of embedded SW development using C on 16/32 bit microcontrollers Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture Automotive Product Development Process knowledge (Aspice, ISO26262) Experience in one or more of Autosar BSW Modules stacks Comstack (Flex Ray, CAN, LIN, Ethernet)Memory Stack , Diagnostic stack ,OS, Wdg, other services Autosar based Embedded Software Development for Safety products following ASPICE compliance processes Responsible for all SW development life cycle phases Requirement Analysis, Design, Coding & Testing/Verification Setup and configure Autosar BSW Modules Expertise in defining SW architectures for throughput, Memory footprint and scalability. Experience in realizing ISO26262 Technical Safety Concepts - RAM test, ROM test, Lock step, CPU test, MPU, OS configurations for multicore architectures would be big plus Experience in RTE generation, make environments, multi-party SW integration Why join us? You can grow at Aptiv. Aptiv provides an inclusive work environment where all individuals can grow and develop, regardless of gender, ethnicity or beliefs. You can have an impact . Safety is a core Aptiv value; we want a safer world for us and our children, one with: Zero fatalities, Zero injuries, Zero accidents. You have support . We ensure you have the resources and support you need to take care of your family and your physical and mental health with a competitive health insurance package.

Key Responsibilities Quality Assurance Leadership: Lead the software QA team in planning, designing, and executing test strategies for embedded systems across all phases of the Software Testing Life Cycle (STLC). Identify, analyze, and resolve software defects to enhance product quality using agile methodologies. Provide technical guidance and training to team members on test plan preparation, test case generation, and debugging techniques. Testing & Validation: Perform functional, integration, and system-level testing for embedded software, focusing on automotive ECUs, Battery Management Systems (BMS), or ignition control systems. Validate software performance using tools like CANalyzer, CANoe, PCAN Explorer, and Pico Scope, ensuring compliance with protocols such as CAN, J1939, SPI, and UART. Conduct hardware-software integration testing and debug issues using tools like DSO, function generators, and DMM. Documentation & Reporting: Document the engineering process, including System Requirement Specifications (SRS), DFMEA, test cases, test reports, and requirement traceability matrices. Use bug tracking tools (e.g., JIRA) to log defects, track resolutions, and provide detailed quality reports to stakeholders. Finalize new products by providing actionable feedback to the design and development teams. Process Improvement: Develop and maintain test setups, test plans, and standard operating procedures to ensure consistent quality standards. Leverage 7 QC tools and analytical skills to improve testing processes and reduce defects. Collaborate with cross-functional teams to ensure alignment between design, development, and quality goals. Project Support: Support the testing of embedded systems for automotive applications (e.g., BMS, ignition systems, or starter generators) and industrial products. Assist in environmental, mechanical, electrical disturbance, and EMI/EMC testing per ISO/IEC and CISPR standards. Contribute to new product development by reviewing specifications, evaluating components, and ensuring manufacturability. Qualifications Education: Bachelors degree in Electronics Engineering, Electrical Engineering, or a related field from a recognized university. Experience: Minimum of 6-8 years of experience in embedded software testing, with at least 3-5 years in a lead or supervisory role. Proven expertise in automotive embedded systems (e.g., ECU, BMS, ignition systems) and communication protocols (CAN, J1939, SPI, UART, I2C, RS485). Technical Skills: Proficiency in testing tools such as CANalyzer, CANoe, PCAN Explorer, Bus Master, JIRA, and Pico Scope. Experience with IDEs like CodeWarrior (10.5/10.6), CS++, and MPLAB IDE, and basic knowledge of Embedded C. Familiarity with test equipment like DSO, function generators, DMM, and sensors (NTC, Hall effect, CT/PT). Knowledge of Matlab Simulink for simulation and testing (preferred). Soft Skills: Strong leadership and team management abilities to lead small teams independently. Excellent problem-solving, debugging, and analytical skills. Effective communication skills to collaborate with cross-functional teams and provide technical training. Certifications/Training (Preferred): Certification in Embedded Systems, Automation, or Software Testing (e.g., ISTQB). Training in CAN protocol, BMS testing, or EMI/EMC standards. Key Competencies Expertise in black-box, unit, and integration testing for embedded systems. Ability to manage agile workflows and deliver high-quality software under tight deadlines. Proactive approach to detecting and resolving defects while ensuring compliance with industry standards.

Project Manager relevant exp of 4 to 5 yrs. No one will be reporting to him/her, he has to handle multiple projects independently. He will be responsible for Customer interaction, presentation, Budgeting, Planning, and release. He should have an automotive/ADAS background. Technical Stack: Should be from an Embedded/Autosar background

Role & responsibilities Knowledge of J1939 and LIN (19.2) based communication protocol Ability to read and interpret a Vehicle Message Matrix document Experience using CAN/LIN traces for troubleshooting Able to simulate and manipulate messages for validation purposes Familiar with basic electrical concepts for wiring Ability to create a component and/or function test plans with appropriate test cases to validate system operation of Mechatronic features in development (DVP). Familiar with J1939 for wiring requirements Proficient on wiring creation, Able to select circuit IDs Able to calculate circuit gauges. Able to understand multiplexed logic Proficient on CHS, meaning that he knows how to perform the following processes: Schematic Generation following DTNA standards in Capital Logic Harness Generation on MOD XC Proficient on Chart and BOM creation Familiar with Deviations Familiar with IDD charting Able to create test cases to validate correct operation of Mechatronic features (DVP&R). Able to engage with different OEMs for wiring requirements Nice to have: Ability to update the global ECU parameters (domains/fragments) using ODX Studio. Ability to convert the supplier provided flash file into DT Ceasar files or SMR files using ODX Studio. Ability to release the ECU parameters, softwares etc., through EDLS Client. Ability to understand the feature needs and accomplish the feature using Flexible Logic Software for global ECUs. Ability to create CHEC parameters using CHEC/CHEC+ CHS Ability to review the DiagnosticLink log files to determine the root cause of the ECU faults and parameter related issues. Knowledge on DiagnosePortal of ECU cdd, cbf etc., Experience with NX Familiar with DTNA and MB standards and specifications. Proficient in using DOORS Next and reviewing the component specifications, feature specs, requirements etc., pls share your updated CV to pradeep_kranth@onwardgroup.com

Kindly share the resume to suhasini.swamy@quest-global.com Job Requirements: Good team player and must be able to work independently. Take the ownership and lead in team building, design, development/porting & validation of system software (Linux, RTOS, Android etc.) in target board. Provide technical inputs to prepare project scope, schedule and cost etc. Guide and mentor the technical leads to deliver commitments on time with Quality. Provide technical solutions for the team Interact with customers on the project technical aspects and prepare and present the project technical progress Co-ordinate and collaborate with onsite support members and communicate the requirements to the offshore team Enhance customer satisfaction by ensuring appropriate engagement Predict project risks and develop mitigation plans Work Experience: Strong C/C++ programming skills Experience in SoC and microcontroller architecture. Good exposure to Linux kernel and driver architecture. Good knowledge in Android internals, Android framework, services, HAL etc. Strong understanding in bootloaders. Experience in RTOS and bare metal firmware design and development activities. Expertise in board bring up, device driver development, interrupt handling etc. Experience in IPs like DMA, CAN, UART, I2C, PCIE, Ethernet, USB, Camera, Display etc. Good debugging skill. Experience in performance and power optimization Experience in Automotive domain. Experience in virtual platform and digital twin. Experience in hypervisors Experience in AutoSAR. Electronics knowledge and basic trouble shooting skills on hardware development boards. • Experience using test equipment to debug the hardware software interface.

• Proficiency in C++/C/Embedded C • Strong understanding of integrating Base SW with the Application Layer • Experience with CAN Driver, SPI Driver, UART Driver, I2C, and LIN • Hands-on experience with CANoe tools for debugging

Role: Technical Leader Experience : 5-7 Years Location : Bangalore Mode of Hiring : Permanent Skills required: Model Based Development (MATLAB) MIL, SIL Domain EV *************************************************** IMMEDIATE JOINERS REQUIRED Send your updated CV directly to: 9152808909 **************************************************** Job Description: AUTOSAR Application Development and Testing in EV/BMS, Body Control, Motor Control and Thermal Management . Handling of Fail-Safe operations in applications. Having knowledge on the same with model based development will be an added advantage using MATLAB(modelling, plant model creation, MIL, SIL Testing, code generation). Embedded software development in C. Added advantage skillset: EV Domain knowledge SDLC Life Cycle, MISRA C Test case definition Automation Testing Embedded system testing Protocols: CAN, Ethernet

Job Title: Classic AUTOSAR COM & DIAG Engineer Experience: 3 to 6 Years | Location: Bangalore Job Description: Develop and integrate AUTOSAR COM & DIAG modules (UDS, DCM, DEM). Configure BSW, CAN, LIN, FlexRay using Vector DaVinci, EB tresos . Debug using CANoe, CANalyzer and optimize system performance. Collaborate with OEMs, Tier-1 suppliers for seamless ECU communication. Required Skills: Strong expertise in AUTOSAR COM & DIAG, UDS, DCM, DEM . Proficiency in C, C++, Embedded C , and AUTOSAR tools . Experience with automotive communication protocols & debugging tools . Contact Details: Dhara Virani: dhara@tekpillar.com

Your future role Take on a new challenge and apply your comprehensive software development and management expertise in a new cutting-edge field. You'll work alongside innovative, dedicated, and supportive teammates. You'll be instrumental in managing Software Development resources and activities, ensuring the delivery of high-quality software baselines in line with QCD requirements. Day-to-day, you'll work closely with teams across the business (Train Control Engineers, Sub-System Engineers, Verification & Validation Leaders), oversee SDE-MPU and SDE-DDU activities, and much more. You'll specifically take care of continuous improvement initiatives, manage traceability and configuration of development tools, but also contribute to tender and project support. We'll look to you for: Applying and ensuring adherence to standard processes and methodologies Defining and sharing reusable design patterns within your domain Promoting and managing continuous improvement within your team Delivering Train Software according to the Engineering Work Package Deploying Train Control & Information Solutions development procedures and processes Managing and controlling KPIs and reporting to the Software Domain Leader All about you We value passion and attitude over experience. That's why we don't expect you to have every single skill. Instead, we've listed some that we think will help you succeed and grow in this role: Degree in Computer Science, Engineering, or a related field Experience or understanding of software development life cycles Knowledge of model-based development tools (e.g., Matlab/Simulink, Control Build) Familiarity with network protocols (MVB, Ethernet, CAN, RS232, RS485) A certification in project management or software development methodologies Proven leadership experience with a track record of managing teams Strong communication and collaboration skills Things you'll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. You'll also: Enjoy stability, challenges and a long-term career free from boring daily routines Work with cutting-edge software development practices Collaborate with transverse teams and helpful colleagues Contribute to innovative projects that shape the future of transportation Utilise our flexible and dynamic working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards leadership and advanced technical roles Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension)

Your future role Take on a new challenge and apply your comprehensive software development lifecycle expertise in a new cutting-edge field. You'll work alongside dedicated and innovative teammates. You'll lead the delivery of software modules and their integration, ensuring each software baseline meets quality, cost, and delivery (QCD) requirements. Day-to-day, you'll work closely with teams across the business (Train Control Engineers, Verification & Validation Leaders, Sub-System Engineers), manage the software development work-package, and much more. You'll specifically take care of ensuring the performance of executable code on target systems, as well as the management of subcontractors, but also contributing to the generation of the Quality Plan. We'll look to you for: Accountability for the delivery of Train Software modules and their integration Deployment and application of development procedures, processes, and design rules Ensuring proper management and traceability of hardware and software configurations Maintaining and controlling project KPIs and reporting to the Software Domain Leader Accountability for Software Validation Managing work packages for subcontractors All about you We value passion and attitude over experience. That's why we don't expect you to have every single skill. Instead, we've listed some that we think will help you succeed and grow in this role: Degree in Computer Science, Engineering, or a related field Hands-on development experience in software phases (minimum of 12 years' experience) Experience leading the complete product lifecycle of at least 3 projects (minimum of 4 years' experience) Proficiency in IEC61131-3 (FBD, ST, and SFC) or model-based development tools like ControlBuild, MATLAB/Simulink Familiarity with real-time, distributed controllers and network protocols (MVB, CIP, TRDP, Ethernet, CAN, RS232, RS485) Experience managing work packages for subcontractors A continuous improvement mindset with a track record of optimizing software development processes

EV Power Electronics Role & responsibilities B.E./B.Tech./ M.E./ M.Tech. Electronics (Automotive, Power electronics preferred) Solid understanding of Power Electronics Fundamentals Experience in SMPS/Switched mode power supply designs, Gate Driver Design and IGBT selection for applications ranging from 400V to 1300V Experience in Digital & Analog circuits Experience in hardware development for automotive applications which includes requirement analysis, circuit design, worst-case analysis and simulation Knowledge of Communication Protocols I2C, SPI, CAN, LIN Hands-on experience with engineering tools like Mathcad, SABER and eADM (desired) Knowledge of Requirements Management tool like DOORS will be an added advantage Ability to perform independent Test & Measurement activities using Oscilloscope, Power Supply, Multimeter, Logic Analyzer, Power Analyzer etc Willingness to co-ordinate with other engineering teams – Mechanics, PCB Layout, Validation, and Production and bring about constructive solutions Experience in designing Magnetics, Electromagnetics simulation tools such as Maxwell, CST will be added advantage Preferred candidate profile Perks and benefits

Role & responsibilities Software Defined vehicle (SDV) Architect and technology consultants in new mobility business models enabled by Software Defined vehicle (SDV) domains. Technical Skills- Embedded, OS (Linux, QNX), C++, Classic and Adaptive Autosar Domain Skills- Automotive Embedded systems in ADAS, OTA, Digital cockpit, Connected car Nice to have skills - Service Oriented Architecture (SOA), Functional Safety & Cybersecurity, CAN/LIN/Ethernet, Microsoft Azure IoT, AWS IoT Preferred candidate profile Architect and technology consultant in new mobility business models enabled by SDV domains Technology consultant who has expertise in SDV, IoT, C++, DevOps and CI/CD Experience with communication protocols such as CAN, SOME/IP, Ethernet. Knowledge of Functional Safety standards (ISO26262) and ASPICE guidelines. Knowledge on Adaptive Autosar, SOA (service Oriented Architecture) Experience with Virtualization tools. Responsible to develop and present the innovative ideas in SDV area. Responsible to actively involve and mentor the CoE teams and project teams. Responsible to understand and devise the solutions in SDV area for the customers and guide them with the technology transformation. Responsible to present and build the partnership with clients such as OEMs, Tier-1s Excellent in communication & presentation. Strong analytical and problem-solving skills. Perks and benefits

3+ yrs Exp. Firmware - dev. of firmware from scratch, debugging, in-depth knowledge of IDEs, compilers etc. of Micro-Controllers (MPLAB/Cube).interfaces/protocols -RS232/RS485, MODBUS, Profibus,.Exp.- C, C++ also require Hardware Enggr - Sr. & Jr. Required Candidate profile Hardware Design Enggr - Convert user specifications into design specifications & derive hardware Specifications Detail hardware design- Analog, Digital, communication etc. Prepare Hardware Test Plan