154 Can Jobs - Page 4

Hardware Product Owner, for Customer Projects, Driver Assistance System Requirements management. Requirement analysis of the customer specification against Bosch specifications. Technical understanding of the electronic circuit and design of electronics modules. Agile method of hardware development life cycle Responsible for Planning and tracking milestones and ensuring SOP and release Project management and Customer Communication The engineer will act as primary technical interface to product and involve in technical customer discussions regarding ECU hardware development and technical specifications. Safety analysis from the HW perspective. Customer handling and project planning and tracking. Planning and delivering the technical documents, sample development and BOM release. Coordinate with various stakeholders of the project in the team (local and international). Development of variants from an existing platform Develop and optimize test steps, which will be used by the production plant to test the ECUs. Bachelor's/Masters degree in Electronics & Communication engineering required 6+ years minimum work experience High Speed design - Digital circuits Worst-case circuit design/calculations, Simulation Experience in verification techniques (design verification methods, data. acquisition/analysis, hardware-in-the-loop virtual tools (HIL/MIL/SIL). Experience with automotive interfaces: CAN, CANFD, Flex ray, Auto-Ethernet, Wifi, MiPi, camera interfaces etc. Familiarity with Vector CANoe, CANalyzer. Project Management certification/ experience Strong communication, written, oral, and interpersonal skills. Must have the ability to work well with cross-functional team effectively. Agility in way of working Stakeholder Engagement Proactiveness in all topics handled High attention to detail, accountability and ownership. Required Skills- SOP, ECU, HW, BOM, HIL. MIL, SIL, CAN, CANFD,, Vector CANoe, CANalyzer., Hardware Product Owner Automotive Customer Project Responsible

Responsible for requirement analysis and architecture proposal for Electronic Control Unit(ECU) Hardware development Responsible for Electronic Control Unit(ECU) Hardware design, integration development by co-coordinating with all ECU component responsibles, stakeholders, plant etc., B.E, B.Tech; M.E, M.Tech (Electrical/Electronics/Communication/Instrumentation)MSc.,(Electronics) Good knowledge in Analog, Digital circuits, Power Electronics Electronic component level assessment: Compatibility check, Worst Cause Calculations, FMEA Knowledge in Embedded System, PCB Layout, Product level mechanical aspects Knowledge in test plans, test reports, product level validation and verification Hands-on experience in lab equipments and tools: CAN, LIN, Ethernet Knowledge in product production process Stakeholder Management: Handling OEM queries and interaction with Sale, Plant Required Skills- CAN, LIN, OEM, FMEA, PCB, Unit ECU, Electronic Control Unit Development Customer Engineering

Software Architecture Hands-on experience is Design and development of Automotive Infotainment Software components(Audio, Tuner, Media, Vehicle , Video Input.) Development of SW components in C/C++, Java Hands-on with Architect and Design tools using UML, Enterprise achitect (EA) etc., Debugging with Multithreading system and process with Target system(GDB, ADB, Lauterbach..) Good understanding of Linux OS system concepts, Memory, Performance tuning, debugging Experience in using communication peripherals and good hold on concepts of CAN, Ethernet, USB, HDMI Required Skills -USB, HDMI, Etherne, CAN, Linux OS, Performance tuning, debugging, GDB, ADB, Lauterbach, UML, Enterprise achitect (EA), C/C++, Java, SW, Audio, Tuner, Media, Vehicle , Video Input.

Programming experience in embedded C & Good knowledge of Linux application space programming,Yocto Build, Build customisation Experience on communication protocolsUART, SPI, I2C, CAN, MODBUS,TCP/IPGood understanding of Linux device model and driver framework multi-threaded programming using POSIX & Good understanding of Access control & user privilege mechanism in Linux Experience in working with ARM /X86 Multi core processor environment Good understanding of Systemd and Device tree BE/BTECH/M.TECH (CS/ECE/IS/EEE) Required Skills Programming, embedded C, Linux, Yocto, protocolsUART, SPI, I2C, CAN, MODBUS, POSIX, ARM

You are responsible for Design and develop of Virtual ECU for Software in Loop solutions for embedded real time applications which includes generation of BSW, RTE, OS and MCAL code along with the integration of ASW code. Responsible to define and integrate Virtual ECUs with plant models vehicle dynamics model, sensor actuator model and restbus models Co-Simulation environment.Hands on experience with co-simulation environment tooling e.g., ETAS COSYM /dSpace Veos /Silver/Model.Connect, Matlab Simulink/ GT suite, Car maker, etc. Active participation in the design, development and integration of virtual network topologies and virtual communication solutions (vNET bus simulation) for CAN, UDS, Flexray, LIN Ethernet. Hands on experience on network related testing tools like Vector CANoe, DiagRA is preferred. Hands on experience with Test Automation tools like ECU-Test, Robot Framework, etc. Measurement & Calibration tools like ETAS INCA / Vector CANape in the SiL environment. Skills:Experience: Professional experience in software design / architecture combined with extensive knowledge in embedded C / C ++, python, Matlab/Simulink in the field of real-time systems.Experience Embedded Software Architecture Classic and Adaptive AUTOSAR.Skills: Strong Virtualization and MATLAB / Simulink knowledge, Familiarity with FMI / FMU, AUTOSAR software architecture. Required Skills ECU, BSW, RTE, ASW, CAN, UDS, Flexray, LIN, ETAS INCA, MATLAB

3 years’ experience in control panel design Auto-cad software with any Genset OEM, GOEM, Genset control Panel builder/suppliers,Genset controller,engine safety unit selection,CAN, switchgear ,RS485, communication protocol, CPCB-IV ,Genset strategy

Responsibilities : As Validation Engineer, you will drive the planning, test cases creation by reading multiple technical specifications, validation, and debug of various hardware IPs (Intellectual Property) as well as supporting the debug experiments and functional tests with next generation hardware IPs for Intel. The Pre-Si validation will happen on standard FPGA based HW platform while Post-Si validation will happen on Intel Test Chips and Intel HW platforms. Qualifications Preferred Experience & Skill set: Experience in Pre (+Post) Si functional validation Strong programming (C/C++) skills and Automation scripting (Python, Perl) expertise Extensive protocol knowledge of CAN/TSN/Ethernet/I2C/SPI/UART and any one of HSIO (PCIe/USB/DDR) Extensive experience with board/platform-level (Hardware & Software) debug Extensive experience with HW debug techniques and methodologies (FPGA and ASIC) Extensive experience with common lab equipment debug tools including JTAG, Logic Analyzer, Oscilloscope, etc. Responsibilities include: Reading, Defining, documenting, executing and reporting the overall functional test plan and verification strategy for IPs Supporting the debug of IP functional failure found during Pre and Post-Silicon validation, bring-up and production phases of Silicon programs Lab-based silicon bring-up and validation focused on the functionality In-Depth testing of IP features using troubleshooting methods, software tools, protocol/logic analyzers, oscilloscopes and other test equipment Engaging in system-level debug/triage efforts Leading collaborative technical discussions to drive resolution on technical issues and roll out technical initiatives Continuous improvement and developing knowledge of system architecture/debug of IPs Supporting debug effort for defects found on customer platforms as requested by customer support teams Driving technical innovation to enhance capabilities in IP functional validation, including tool and script development, and organization level technical initiatives Python expertise and FPGA Prototyping knowledge Minimum Qualifications:Masters or B.E / B.tech in Computer Architect/VLSIRequirements listed would be obtained through a combination of industry relevant job experience, internship experiences and or schoolwork/classes/research. Inside this Business Group The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them. As the largest business unit at Intel, CCG is investing more heavily in the PC, ramping its capabilities even more aggressively, and designing the PC experience even more deliberately, including delivering a predictable cadence of leadership products. As a result, we are able to fuel innovation across Intel, providing an important source of IP and scale, as well as help the company deliver on its purpose of enriching the lives of every person on earth.

Role description Team managers main knowledge should be people management (40%) and business management (30%). Technical know-how (30%) is good to have to a degree that he can support project management and understand the pain points. ASPICE knowledge must exist. Project Management in automotive projects. Planning, stakeholder management Assertive Good coordination skills Customer oriented mindset Time management Moderation methods Agile methods and roles Knowledge of System Level (ASPICE SYS.1 to 5) and SW Level (ASPICE SWE.1 to 6) Knowledge of ASPICE processes MAN.3, MAN.5, SUP.1, SUP.8, SUP.9, SUP.10 Good to have technical skills: Understanding and configurability of different AUTOSAR BSW Stacks Communication, Diagnostics, Security, Scheduler, etc. Understanding of overall System and SW Design of Series SW Products and Services, in embedded field Overview of the hardware or peripheral components to be addressed (e.g. UART, system base chip, AD converter) Overview of microprocessor architectures and embedded operating systems (e.g. OSEK, RTOS) and bus systems (e.g. CAN, LIN, SPI, Ethernet)

Good exp in INFOTAINMENT features like Bluetooth, FM, USB, AUX Good knowledge at tools like CAn, CANoe and CANalyzer Good Experience in cluster, Radioss, Hands on knowledge on phone projection testing with infotainment systems such as Android Auto and Car Play. Should know how to create test cases, test specs Good knowledge on various testing methods Good Experience in Python Programming concepts Good Knowledge in verification and validation for On - Bench and In-Vehicle testing

Python Automation Qualification -BE/Btech/ME/Mtech Experience Band -4 to 5 years Location - pune Mandatory Skills 4+ years of experience in Automation tools Development using Python. Well versed in Python development along with experience in Test Automation and Automotive Testing. Good understanding of Automotive Domain and good exposure to different protocols like CAN,UDS Hans on experience with different dSPACE and Vector tool chain like CANoe, CANalyzer, Automation desk Validation experience in the Automotive area with various HIL test setups Good Oral and written communication skills. Good Analytical and debugging skills . Good To Have Hands on experience in CAPL scripting . Working experience using Agile Methodology and version management tools like SVN, GitLab etc Good understanding of Cyber Security in Automotive.

1.Proficient in programming languages such as: Embedded C, C++ 2.Knowledge of screen design tool like GUIx. 3.Hands on experience on debugger, simulator. 4.Proficient in documenting test artifacts like test plan/procedures, test report, test summary report etc. 5.Experienced in the software development/testing lifecycle, troubleshooting 6.Proficient in debugging and problem-solving skills (incl. working with embedded hardware) 7.Exposure to Communication protocols (CAN, Modbus etc.)

JOB RESPONSIBILITIES: LRR Technologies is currently hiring talented people to work with Carrier Corporation. Carrier Corporation (NYSE: CARR) is a global provider of innovative heating, ventilating, and air conditioning (HVAC), refrigeration, fire, security, and building automation technologies boasting annual sales of over $20 billion, with 58,000 employees spread across 160+ countries. For its R&D center in Hyderabad, Carrier is looking for a talented Embedded Firmware Developer. The candidate will be working with a dynamic cross-functional global development team performing embedded systems firmware design and development for next-generation refrigeration Graphical display controllers. The Individual must have the ability to understand system requirements, understand system architecture, prepare design & code using C & amp; C++, and perform unit and system testing. The selected candidate must have a background in embedded software development with strong coding skills, devices/system interaction and troubleshooting, and will be involved in all aspects of the product development process(concept, design, implementation, validation, verification, compliance, and production). The candidate will interact frequently with project management both locally and globally. Will need to work with customers at global locations across different time zones. The selected candidate shall be able to work individually and with team hardware, software, and QA both locally and globally. Additionally, the job will require the ability to understand the product domain and investigate new technologies and standards as required. EDUCATION PREFERRED : B.Tech/M.Tech Electronics/Electrical/Computer Science. Experience : 8 to 12 years EXPERIENCE PREFERRED : . Essential Competencies : Proven expertise in all aspects of the Product development process, right from conceptualization to field deployment to support. Strong in Embedded C and C++ with a minimum of 8 to 12 years of experience. Experience in non-OS(bare metal) and FreeRTOS-based system design. Hands-on Development experience with CAN, RS232, SPI, I2C, Timers, Graphics LCD, EEPROM, and Flash Driver interfaces. Must have 5-8 years of experience in UI design and development on Graphics controllers in the Embedded domain using C and C++. Experience in MVC and Design Patterns is must. Experience in localization implementation for European and Asian languages Experience in ARM 32-bit Microcontrollers and experience with Renesas controllers is preferred. Must have experience in Debugging, and Trouble-shooting Embedded systems using Emulators, JTAG\BDM Debuggers, etc. Architecture, Design, and Documentation of Embedded Systems Software. Hands-on Object Oriented Analysis and Design (OOAD). Work closely with systems, hardware, validation/reliability, and manufacturing engineering disciplines. Able to understand hardware design and schematics at a high level. Must have experience with software version control and defect-tracking software. Understanding of the software development life cycle and processes(Waterfall, Agile) Other Competencies Understanding of the entire system development process. Strong English communication skills - oral and written. Ability to adapt quickly to an existing, complex environment. The Ability to quickly learn new concepts and software is necessary. Passionate about building high-quality systems with software development best practices. Working experience in product-based companies. Understanding and responding quickly to customer issues. Perks and benefits The position will pay quite well - Rs. 22.5 - 30 lakh per annum is the band, and the final amount may be even higher depending on your experience and expertise. If made an offer, you will need to join in 4 weeks. This is a lifetime opportunity for people looking to specialize in highly coveted niche futuristic skills and to work in a top multinational company with excellent employee-first initiatives. We look forward to your application.

ZF LIFETEC employees around 36,000 people at a total of 48 locations in 20 countries in Europe, North and South America and Asia. The company develops and produces intelligent seat belt and steering wheel systems, airbag modules and gas generators for all forms of mobility with the highest quality and safety standards. With sales of over EUR 4.6 billion in 2023, ZF LIFETEC is one of the world's leading manufacturers of safety systems and can look back on a company history of over 60 years as a supplier to renowned vehicle manufacturers. Role & responsibilities Development of Embedded Software for automotive Control Units (Mandatory) Work with other software engineers to effectively partition the software work efforts. Plan and execute the Software activities as per Project milestones Manage the SW development as per ASPICE practices and delivery MicroControllers Device driver development from scratch (Mandatory) Communication of ECU using CAN / LIN protocols (Mandatory) Integration and initiation of base Software for 16 and 32 bit embedded C (Mandatory) Perform impact analysis onto the software architecture of new feature requests with existing Technical knowledge Support for other departments, especially Function and Algortihm, functional safety, Cyber Security, Integration and testing Definition of SW Interfaces to the Application Layer Creation and review of Software requirements specification according to automotive SPICE Creation and review of SW architecture and Design Documents in Rhapsody Your profile: Self-dependent working Proficient in Embedded C coding and MicroController device driver knowledge CAN / LIN bus communication and their stack integration knowledge Experience in UML for definition of software architecture Experience in working with version management tools, ideally PTC Integrity Able to deal with Automotive Embedded topics and provide the technical solutions Able to plan the software activities to meet customer milestone along with ASPICE exepectations Understanding of software engineering methods and experience in development tools Knowledge of software development lifecycle, ASPICE Good knowledge of English (B2). Additional skills that would be an advantage: Knowledge of CyberSecutity and AUTOSAR topics.

PURPOSE OF THE POSITION: Design, develop and implement hardware architecture innovative medical devices and solutions. KEY RESULT AREAS : 1. Define and develop the Hardware architecture for new generation of medical devices. 2. Breaking down problems, Documenting problem statements and effort estimation. 3. Implementing Engineering methodologies / practices in the team and drive adherence. Manage the hardware function to deliver innovative product solutions. RESPONSIBILITIES : 1. Manage concept to production engineering - including high level design, detailed design, schematic entry, simulation, layout design, prototype assembly and logistics, board bring up, debugging, system integration, design verification and manufacturing handoff. 2. Design electronic boards and interconnects comprising digital, Analog, power, microcontroller / microprocessor, precision low level Analog designs, A/D and D/a converts, monitor circuits and programable logic-based designs. 3. Work closely with suppliers, sourcing, manufacturing and service teams to realize project goals. 4. Ensure Design for manufacturing (DFM), Design for test (DFT), Design for reliability (DFR), compliance to regulatory requirements (IEC60601 and others as required). 5. Work closely with project management to ensure alignment of plans with deliverables. 6. Ensure conceptual completeness of the hardware engineering solution. 7. Lead research and evaluation of technologies, Industry and Market trends to assist in product development 8. Provide technology leadership, guidance and mentorship throughout your domain. 9. Operate within an economic framework when analysing the impact of design decisions. REQUIREMENT PROFILE: (Qualification, No of yrs exp) a. Bachelors / Masters degree in Electrical / Electronics / Medical electronics engineering. b. 10+ years of industry experience in concept to delivery with around 4 years of medical devices design and development experience. c. Knowledge of regulations relating to hardware design in medical device industry. COMPETENCIES: (knowledge, skills and attitudes required to perform job): a. Experienced in end to end electrical and electronic hardware development cycle in digital, analog, power and microcontroller / microprocessor-based designs. b. Experience in interfacing real time sensors like force, position, distance, light, etc., c. Thorough understanding of new product introduction process, regulatory compliance process and design history file documentation. d. Self-motivated to carry hands on work with the ability to debug and fix issues in hardware system. e. Demonstrated experience in design reviews through the product development lifecycle. f. Define requirements for firmware development, test automation tools development. g. Hands-on experience with schematic, layout Altium or Orcad and circuit simulation tools. h. Hands-on experience with signal and power integrity design. i. Ability to drive board bring up, performance testing and reliability demonstration. j. Positive attitude to explore, drive and passionate in excelling on the technology goals. k. Good communication skills to communicate with customers, research partners, business leaders and team members. Desired: l. Hands on experience with medical devices using motion control and / or robotics modules. m. n. Interfacing vision systems.

Position Specific Duties - Design/Develop Embedded Software with On Time high quality deliverables Prepare and maintain design, code & test documentation & review work products as appropriate with Team Lead. Work in an Agile Scrum Team. Interact with customers at the unit to resolve software technical issues. Understanding of Project timeline and ensuring delivery for tractors platform. Embedded Software development for Tractor Automation for Utility, Mid & Large Tractors Required Skills are- 4-6 years experience in embedded Software development. Strong programming skills in 'C' Language Knowledge of microprocessor/microcontrollers & circuits CAN & J1939 protocol knowledge Secondary: Experience on MBSD using Matlab,Simulink,Stateflow Understanding of RTOS concepts,Communication

Dear candidate, We are looking for Lighting functions ELctronics professionals with good experitise in Lighting Electronics development & Lighting Testing Exp .: 5 to 10 yrs Location : Pune Leading CAN/LIN and Hardwired based Head Lamp / Tail lamp / Interior Lighting Electronics development activities. Project Coordination and Tracking (Time, Cost & Quality) against Milestones in the area of EEL- Electronics, including FCM, Leimo, Stepper Motors, etc. Provide Support for EE Department Vehicle level Electronics, BCM Parameterization, ZDC creation for lighting Application, EMI/EMC Test, Functional safety (Automotive Lighting ASIL Rating Requirements ) etc, as per need. Provide Support for Lighting Use-case Testing on Vehicle and Component Level. Provide support for Root Cause Analysis of lighting electronics.

Able to independently develop validation strategy for Grey Box testing/End-to-End testing, design test cases based on requirements in Embedded environment & Experience in Embedded controller validation, black box testing Experience in Python programming / Object Oriented design concepts Experienced in the design and development of embedded controls software. Excellent working knowledge in developing microcontroller-based systems and debugging techniques. Good knowledge of testing, test design, test development processes, and related tools. Ability to develop black box tests. Working knowledge with test tools and Automated test Equipment is a big advantage. Working knowledge of SDLC. Should have worked at least in parts of SDLC. Having worked on projects through a full SDLC and having knowledge of the various development and test phases of the SDLC is a big advantage. Experienced with embedded and serial communication protocols (RS-485, RS-232, CAN) and networking protocols (TCP, UDP) Usage of in-circuit emulators (ICE) with debuggers Good exposure to real-time systems and RTOS Should have executed projects and worked in the different phases of a complete life-cycle process. Strong knowledge of Software Engineering concepts, Quality processes, and tools. Familiar with Configuration Management, defect tracking, Requirements management concepts, and tools. Analyze the requirements using the requirement tool and provide traceability. ISTQB certification preferred. Experience with scripting languages like Python. Familiar with Requirements Management, Configuration Management concepts, source code version control, bug tracking, and traceability. Having worked with tools for these activities is an advantage. Familiar with basic concepts of Software Quality and Process. Familiarity with the HVAC industry is a plus.

Roles & Responsibilities: Schematic capture, PCB layout Design proof of concepts through circuit simulations or/and rapid prototyping. uphold hardware design standards and methodologies considering power efficient, robust and reliable hardware solutions Design calculations, analyze, test and validate embedded electronics circuits Documentation of design specifications and implementation details. Collaborating with firmware engineers to develop and test hardware modules Collaborating with harness engineers to design, develop and test hardware modules Design for Manufacturing by collaborating with the manufacturing team Collaborating for business development and certification activities Requirements: Hands-on experience in selection of microcontrollers / microprocessors Hands-on experience in integration of microcontrollers/microprocessors with Interfaces such as I2C, CAN, SPI, RS485, Ethernet is required Hands-on experience in designing analog and digital electronic circuit design. Should have thorough understanding of semiconductor components such as power MOSFETs IGBTS,etc Basic understanding of different types of permanent magnet motors such as BLDC,etc., Proficiency in PCB design tools such as ORCAD, Eagle, Altium Basic understanding of technical and regulatory standards for EMI/EMC Good hardware troubleshooting skills. Able to support/debug system integration

Your proficiency in RTOS, coupled with a strong inclination towards self-learning, will be crucial in ensuring the performance, reliability, and innovation of our embedded systems. You will be responsible for Design, develop, and maintain embedded software for drone flight control, communication, and sensor integration. Collaborate with hardware engineers to optimize the performance of embedded systems in terms of power consumption, processing speed, and reliability. Implement and test communication protocols to ensure seamless connectivity between drones and ground control systems. Debug and troubleshoot embedded systems issues, providing timely solutions to maintain optimal drone performance. Must Have 0-2years of experience in embedded firmware and driver development. Strong development experience in embedded C and RTOS Should have detailed knowledge and experience on microcontrollers / microprocessors (16 bit/32 bit) Strong in OS concepts like efficient multi-threading and resource-sharing Experience in working with firmware, application and board support packages Expert knowledge on protocols like (RS485, SPI, I2C, ADCs, PWM, CAN) Embedded development tools and methodologies Version Control Systems Clear Case / RTC /GIT Experience with firmware development, testing, and system level bring up and debugging. Experience in working with wireless communications modules (like BLE, Lo-Ra, 4G) Attractive perks that you avail Flexible Work Arrangements: Enjoy flexibility with remote work options and adaptable schedules. Equity Ownership: Stock options or equity grants to share in the company's success and growth. Learning and Development: Fuel your growth with access to workshops, conferences, and on-going training. Casual Dress Code: Express yourself comfortably with a relaxed dress code. Modern Workspaces: Innovate in flexible, collaborative workspaces that inspire creativity. Health and Wellness: Stay healthy with comprehensive insurance and mental health support Location-Chandigarh,AP, UP, MP, WB, Tamil nadu, HP, arunachal pradesh, uttranchal, uttrakhand, gujarat, kerala, karnataka, telengana, orrisa, assam, manipur, J&K, ladhak, maharastra, mehgalaya, manipur, sikkim, nagaland, punjab, rajasthan, jharyana, delhi, dadar nagar haveli, andaman nicobar islnads

Lead and manage a team of engineers specializing in Mobility, Infotainment, and IoT projects. Foster a culture of innovation, collaboration, and technical excellence within the team. Provide mentorship and professional development opportunities to team members. Oversee the end-to-end development and delivery of infotainment, AUTOSAR, and IoT products. Ensure projects are completed on time, within budget, and meet quality standards. Collaborate with cross-functional teams, including software, hardware, and systems engineering. Utilize deep knowledge of AUTOSAR architecture and infotainment systems to guide technical decisions. Maintain strong relationships with OEMs and Tier-1 suppliers to ensure alignment and project success. Ensure compliance with automotive safety standards (ISO 26262) and industry regulations. Implement best practices for software development, hardware design, and testing to maintain high product quality and reliability. Preferred Skills: Experience with Agile development, vehicle networking protocols (CAN, LIN, Ethernet), and proficiency in C/C++, Python, MATLAB. Location : Thiruvananthapuram

Responsible for developing microcontroller drivers like UART, SPI, I2C, CAN, Ethernet using embedded C and application level program in c for medical devices Defining test cases for the sub system against the requirements to qualify the firmware's Required Candidate profile Strong hands on experience in embedded C programming, MISRA, 16 or 32 bit microcontrollers, UART, SPI, I2C, CAN, RS485, RS232, PWM driver development, ADC, DAC interfacing, troubleshooting. Perks and benefits Incentives, Insurance, PF, Gratuity, Cab, Canteen

Hardware Design Good Experience in High Speed Hardware Design. 1.relevant embedded hardware design 2. Proficiency in 8 bit, 16 bit and 32 bit microcontroller based designs 3. Proficiency in communication protocols like SPI, I2C, CAN, UART, USB, ethernet etc. 4. Experience in low power and low voltage, Power supply designs 5. Proficiency in schematics preparation in any of EDA tools is must. 6. Experience in hardware testing and validation is required 7. Experience in solving EMI/EMC problems is required 8. Knowledge about electronics product regulatory standards is required 9. Ability to guide PCB designer on layout and routing 10. Experience in board bring up, prototyping skills etc are required. 11. Knowledge in hardware Design work flow is required 12. Knowledge in configuration management tool is a good to have 13. Proficiency in high speed digital signal integrity analysis is an advantage

JOB Description : Embedded Software Engineer Industry : Thermal Printer Technical Skills Required • Candidate must have project development experience on following: o Designing 8/16/32 Bit Microcontroller based systems preferably on ARM Cortex microcontrollers. o Digital & Analogue based system design o Concepts like ADC, DAC, GPIO, Timer , Intrupts, Counters, Debugging etc. o Communication protocols like UART, SPI, I2C, CAN, RS232, RS422, RS485. • Experience in hands-on development and troubleshooting on embedded targets. • Solid programming experience in C or C++. • Proven experience in embedded systems design with multitasking real-time operating systems. • Excellent oral and written communication skills (English) • Ability to work well in a team environment • Ability to learn quickly on the job Duties and Responsibilities • Designing, developing, coding, testing and debugging system software. • Review and understand Technical References and Data Sheets for the systems microcontroller. • Create proof of concept and fast prototype software. • Assist hardware engineers in development of new platforms and in troubleshooting hardware / software interfaces. • Create detailed requirements, software designs, and architecture specifications. • Work with sales-marketing team and perform R&D functions to generate new product concepts, help determine architectural direction, and perform technical feasibility studies. • Implement detailed embedded designs and determine technical solutions to meet product requirement with minimum guidance. • Support software QA and optimize I/O performance.

Software design & firmware development on Microcontrollers,C language Effectively contribute to algorithms & logic development of the products in the field of System Control Power Control Li-Ion batteries Create functional requirements for firmware Perks and benefits Food Facility Health Insurance

Position - Firmware Engineer Experience - 4+ Years Location - Hyderabad Notice Period - Immediate to 30 days Development experience in micro-controller drivers, e.g. Display, ADC, MCU, PWM, CAN, I2C, SPI, UART and GPIO, etc. Proven skills in analysis/debugging of reported software issues Good understanding of micro controller or micro-processor concepts such as OS, scheduling Experience in using development tools Configuration management tools (such as GIT) Change management tools (such as JIRA) A self-starter who can work collaboratively with teams Must have passion towards developing high quality software with safety mindset Must have very good communication skills (written and oral)