15 Calibrating Jobs

Role & responsibilities Patient care and communication Radiopharmaceutical handling Technical and procedural duties Safety and compliance Preferred candidate profile Education: A minimum of an Maters degree in Nuclear Medicine Technology program is required.

You will be responsible for calibrating and testing flow meters based on established procedures. It will be your duty to document calibration results and maintain accurate records for quality and traceability. Additionally, you will have to plan and monitor daily activities for mechanical assembly and the calibration lab. If you come across any non-conforming products or calibration issues, you should identify and report them. In case calibration results fall outside tolerance, you are expected to support root cause analysis and corrective actions. Routine maintenance and cleaning of the calibration facility will also fall under your responsibilities. You will also assist in developing or im...

As an Engineering & Facilities Associate at Fairfield by Marriott Mumbai Andheri West, your role involves installing, maintaining, performing preventative maintenance, and recommending replacement of tools, appliances, and equipment. You will also be responsible for calibrating controls, gauges, meters, and operating shut-off valves. Additionally, ordering, stocking parts and supplies, inspecting tools and equipment, operating power lift, and completing life safety checklists are part of your duties. You will also inspect fire sprinkler valves and alarm systems, assist in developing disaster response protocols, respond to guest repair requests, and support management in various employee-rela...

As an Installation and Commissioning Engineer with extensive experience in equipment installation and commissioning for module production lines, your role will involve planning, overseeing, and executing the installation and commissioning of equipment in pre-lamination, lamination, and post-lamination areas. You will be responsible for conducting site assessments, calibrating and aligning machinery, troubleshooting issues, optimizing processes, collaborating with cross-functional teams, training on-site teams, and documenting procedures and reports. Key Responsibilities: - Plan, oversee, and execute the installation and commissioning of equipment in pre-lamination, lamination, and post-lamin...

You will be part of the Medical Equipment Management service at NHS Greater Glasgow and Clyde, working as a clinical engineer technologist in a team based at Gartnavel General Hospital. Your role will involve managing the full life cycle of over 55,000 medical equipment devices across ten hospital sites, ensuring they are fully functional and accurate for the safe diagnosis and treatment of patients. Your responsibilities will include: - Commissioning, calibrating, and performance assuring a wide range of specialist and highly complex medical equipment - Responding to equipment failures in various hospital areas, such as theatres, and performing planned maintenance in outpatient clinics - Wo...

Role Overview: As a Quality Assurance Specialist focusing on plant quality, your main responsibility will be ensuring the overall quality parameters of raw milk. Key Responsibilities: - Testing of milk and milk products for physico-chemical parameters. - Preparation of chemicals and standardization. - Monitoring GMP practices and process CCPs. - Maintaining GLP requirements. - Keeping all log sheets as per ISO standards and compiling data. - Coordinating with internal quality, production, and finished goods store teams. - Calibrating and verifying equipment, as well as maintaining records. - Monitoring the weight of finished goods packaging. - Updating and coordinating daily activities. - In...

As a Star Harvester, your role will involve the collection, analysis, and documentation of star samples. You will be required to calibrate harvesting instruments, collect star samples from designated sites, maintain equipment, and collaborate with the research and development team to optimize harvesting procedures. It is essential that you prepare detailed reports on findings and ensure adherence to all safety and regulatory standards. Key Responsibilities: - Calibrate harvesting instruments - Collect star samples from designated sites - Maintain equipment - Collaborate with the research and development team - Prepare detailed reports on findings - Ensure adherence to safety and regulatory s...

Role & responsibilities Carry out chemical and bacteriological analysis of raw water, treated water, and distribution samples. Ensure water quality compliance with CPHEEO / BIS / WHO standards. Conduct regular testing for parameters such as pH, turbidity, residual chlorine, hardness, TDS, alkalinity, and microbial counts. Prepare daily / weekly / monthly water quality reports for submission to the management and authorities. Supervise dosing of coagulants, disinfectants, and other treatment chemicals at treatment plants and pumping stations. Monitor and optimize chemical consumption to ensure cost efficiency and effectiveness. Maintain laboratory equipment, instruments, and calibration recor...

As an EV Technician at Vecmocon, you will play a crucial role in diagnosing and repairing electrical and mechanical faults in EV 2W & 3W vehicles. Your responsibilities will include: - Performing routine maintenance tasks such as brake checks, suspension checks, and hub motor inspections. - Working on various components including battery systems, BMS, controllers, converters, chargers, and wiring harnesses. - Calibrating and configuring components like throttle, display, and sensors. - Conducting battery health checks and replacements when necessary. - Updating service records, job cards, and feedback accurately. - Responding promptly and efficiently to on-site breakdown service requirements...

As part of the team responsible for commissioning and maintaining I&C systems, your duties will include: - Conducting pre-job briefings - Isolating systems - Removing instruments - Cleaning and decontamination - Performing physical inspections - Testing and troubleshooting - Repairing and calibrating - Filling data sheets - Normalizing systems - Providing feedback to ENC The required qualification for this full-time position with a rotational shift schedule is a Diploma. You should possess at least 3 years of work experience, with a specific emphasis on 3 years of experience in Electrical Engineering. Proficiency in Hindi is preferred for this role, and the work location will be in person. I...

As a Biomedical Engineer, you will be responsible for designing and creating biomedical technology such as artificial internal organs, body parts, machines, equipment, and software used for diagnosing and treating medical problems. Your role will involve installing, calibrating, evaluating the safety and effectiveness, maintaining, and repairing biomedical machines and equipment. You will also provide technical support and keep service histories up-to-date. In addition to the technical aspects, you will play a crucial role in training clinicians and personnel on the safe and effective use of biomedical machines and equipment. Researching new materials, technologies, and engineering aspects r...

Join our team as an Electric 3-Wheeler Technician! If you are passionate about electric vehicles and cutting-edge technology, and possess the skills for troubleshooting, repairing, and maintaining electric vehicles, then we are looking for YOU to be a part of our team. Katalyst EV is a forward-thinking company dedicated to revolutionizing the future of mobility with a focus on electric 3-wheelers to provide sustainable and efficient transportation solutions. Our mission is to drive innovation while reducing our carbon footprint, and we are seeking talented individuals to help us achieve this goal. As an Electric 3-Wheeler Technician, you will play a crucial role in ensuring the optimal perfo...

As a Machine Setup and Programming specialist, you will be responsible for interpreting intricate e drawings and blueprints to determine machining parameters and tool selection. Your expertise will be crucial in developing and editing CNC programs using CAD/CAM software to define cutting paths, speeds, feeds, and tool changes. Additionally, you will be tasked with setting up CNC turning machines, which includes chucking, workholding, and tooling according to specified requirements. Ensuring precision and efficiency in machining processes is paramount. You will monitor machining operations during production runs, making necessary adjustments to maintain quality standards. In the event of mach...

You will be responsible for installing and calibrating biomedical machines, equipment, and software. Your role will involve evaluating the safety, efficiency, and effectiveness of these machines and software. Additionally, you will be expected to maintain and repair biomedical equipment as necessary and provide technical support when needed. It is essential to keep up-to-date service histories on all biomedical machines and equipment. Expertise in Biochemistry is a key requirement for this position. This is a full-time job with a day shift schedule. The work location is Sangrur, Punjab. You must be able to reliably commute to the location or be planning to relocate before starting work. The ...

Installing and calibrating biomedical machines, equipment, and software. Evaluating the safety, efficiency, and effectiveness of biomedical machines, equipment and software. Maintaining and repairing biomedical machines and equipment, when needed. Providing technical support, when needed. Keeping up-to-date service histories on all biomedical machines and equipment. Training clinicians and other personnel on how to use biomedical machines and equipment, safely and effectively. Researching new materials, technologies, and engineering aspects of biological processes and systems. Writing reports and documents detailing protocols, policies, standards of use, maintenance, and repairs of biomedica...