9 Cad Models Jobs

Key Responsibilities Investigate and resolve product design issues within Value Package Introduction (VPI), Product Preceding Technology (PPT), or Value Package Change Request (VPCR) programs. Create and refine CAD models, drawings, and specifications using tools such as CREO, following internal standards and practices. Support and lead the application of engineering tools such as DFMEA, GD&T, tolerance stack-up analysis, and DVA. Collaborate across disciplines to drive design intent through effective design reviews and documentation. Conduct product-level design assessments and optimization for function, cost, reliability, and manufacturability. Provide technical input on component and system-level decisions and present solutions in cross-functional settings. Utilize simulation and analysis tools (e.g., ANSYS Workbench) to validate designs. Engage in continuous improvement of tools, methods, and processes related to mechanical design. Support configuration management and maintain traceability of design changes. Participate in the mentoring and coordination of technicians and student interns as needed. Experience 5-8 years of relevant work experience preferred. Prior internships or co-op experiences in a technical or product development role are advantageous. Experience in the automotive, powertrain, or related mechanical systems industries is a plus. Skills Proficient in MS Office and CAD software (preferably CREO). Familiar with GD&T, DFMEA, tolerance stack-up, and failure mode avoidance techniques. Working knowledge of design validation, system integration, and technical documentation. Strong analytical, troubleshooting, and problem-solving skills. Excellent communication skills with the ability to tailor messages to various audiences. Comfortable working in cross-functional and multidisciplinary teams. Preferred Knowledge Familiarity with automotive components or systems. Experience with DFSS (Design for Six Sigma) methodology. Exposure to product platform planning, change management, and configuration control processes. Qualifications Bachelor s degree in Mechanical Engineering or a related STEM field (or equivalent experience). May require licensing for compliance with export control or sanctions regulations, depending on location or project scope. Competencies Mechanical Design Modeling and Analysis: Proficient in creating 3D models and performing design validations. Product Function Simulation and Analysis: Uses computational tools to support design decisions. System Requirements Engineering: Capable of translating stakeholder needs into actionable and verifiable design requirements. Product Development Execution: Manages product design processes and lifecycle activities with a focus on quality and timeliness. Product Problem Solving: Applies structured problem-solving approaches to identify root causes and implement robust solutions. Collaboration and Communication: Effectively works with global teams and stakeholders to achieve technical and project goals. Decision Quality and Results Driven: Makes data-informed decisions to support product performance and delivery metrics. Values Differences and Self-Development: Embraces diversity of thought and seeks continuous growth opportunities.

- Develop 2D & 3D CAD models for jewelry designs, ensuring precision and accuracy. - Ensure error-free casting designs by applying technical knowledge of jewelry manufacturing. - Collaborate with designers, artisans, and production teams to develop innovative jewelry pieces. - Ensure design feasibility by analyzing structural integrity, weight, and material constraints. - Maintain awareness of industry trends, jewelry aesthetics, and evolving CAD techniques. - Work with cross-functional teams to ensure production alignment with design specifications. - Revise and refine CAD models based on feedback and prototyping results. - Manage time effectively, ensuring timely completion of assigned projects.

Assist in the planning, development, and execution of engineering projects. Work closely with senior engineers to create and modify CAD models. Generate and maintain detailed technical drawings and documentation. Prepare all design & development drawings and documents as per ISO documentation requirements. Understand and apply industry standards, codes, and procedures.

Looking for a Draughtsman - Mechanical. You will be responsible for carrying out engineering duties including drawings of Fume Extraction Systems/APC Systems for various industries, Bio Gas Plants, Gasifiers etc.

- Develop 2D & 3D CAD models for jewelry designs, ensuring precision and accuracy. - Ensure error-free casting designs by applying technical knowledge of jewelry manufacturing. - Collaborate with designers, artisans, and production teams to develop innovative jewelry pieces. - Ensure design feasibility by analyzing structural integrity, weight, and material constraints. - Maintain awareness of industry trends, jewelry aesthetics, and evolving CAD techniques. - Work with cross-functional teams to ensure production alignment with design specifications. - Revise and refine CAD models based on feedback and prototyping results. - Manage time effectively, ensuring timely completion of assigned projects.

Role & responsibilities Job Title: Senior Mechanical Design Engineer At Sandvik Mining and Rock Technology India Private Limited (Part of Sandvik Group), we offer you a world of opportunities. Our diverse businesses and global network enable you to explore your potential and thrive. So now we challenge you: Think one step further, and then take it! Job profile As Mechanical Engineer you are responsible for Design and Development of mining equipment, create optimized CAD models/ manufacturing drawings, BOM for sub-systems used in mining equipment and to ensure the quality of drawings produced by Design Engineers. This job involves providing engineering support to various Divisions within Sandvik Mining in Current Product Engineering, New product Development Engineering and Order based Engineering activities. The main responsibilities are as follows: Involved in design & development of mining equipment. Develop Subsystem designs & Select Component, Materials. Process evolution and continuous improvement. Optimize joint development efforts through appropriate database use and project design. Creation of BOM / ECN and release of drawings for production. Concept Evaluation and Detailed design Reviews with stakeholders. Layout checks and Machine specification Validation. Ensure Tasks are assigned and executed to meet the project requirements. Ensure Quality and Delivery of Mechanical and Hydraulic Item data and drawings as per Global Standards. Ensure Quality and optimization of CAD Models for Mechanical and Hydraulic Items Collaborate with product and engineering departments to understand their needs and propose possible solutions. Communicate results and ideas to key decision makers. Your profile You have a university degree in Mechanical engineering / masters in mechanical engineering (or equivalent) and between 4-6 years of experience into Mechanical Engineering Design and Development. You have the needed relevant experience as per the following. Describes Mechanical systems in specific application areas. Selection and sizing of Mechanical components. Troubleshoots Mechanical systems and proposes solutions. Select components considering performance, cost, and service. Should have good understanding of Welding and GD&T application in drawings. Good understanding of hydraulic component symbols and can logically combine them wherever required and possess knowledge of ISO drafting standards for hydraulic circuits is an advantage. Should have basic knowledge of Mechanical/Electric/Hydraulic interfaces. Exposure to, UG/NX Teamcenter integrated environment, Auto Cad and E3-Hydaulics tool is an added advantage. Basic understanding on working principle for various Mechanical components etc. Good ability to work within the team You fit into a dynamic and fast-moving team within a business which has been around. You value the opportunity to work with both in-house R&D as well as with customers all around the world. You possess the ability to comprehend complex technical concepts quickly and focus on priorities. Experience in Heavy Mining equipment design space with exposure in heavy machinery industry is regarded as a merit. The ability to speak and write in English, as well as the willingness to travel, are prerequisites in this job. We are a company with an open-minded culture, actively working to create a workplace that is characterized by diversity and inclusion. We offer you an interesting role in an international business environment as well as opportunities for your professional development. Preferred candidate profile Perks and benefits

Hello Candidate , Greetings from Hungry Bird IT Consulting Services Pvt. Ltd.! We're hiring a Piping Design Engineer for our client. Qualification: Diploma / B.Tech Mechanical Engineering or related field. Location: Hyderabad Experience: 2 to 5 Years Work type: Work from office Notice Period: looking for immediate joiner's Job description : Key Responsibilities : Develop and optimize piping system designs based on project requirements, industry standards, and client specifications. Process 3D scanning files and convert scanned data into precise and detailed CAD models. Collaborate with cross-functional teams to ensure seamless integration of piping designs into overall plant layouts. Assist in the development and implementation of digital twin solutions for industrial plants, enabling advanced simulation, monitoring, and predictive maintenance. Conduct design reviews, analyze layouts, and identify improvements for efficiency and safety. Ensure compliance with applicable codes, standards, and regulations. Prepare technical documentation, reports, and design specifications. design and develop pipe racks in alignment with process and utility line requirements. Draft and maintain Plot Plans, Equipment Layouts, and Piping Layouts. Review equipment vendor General Arrangement Drawings (GADs) to finalize nozzle orientations as per the design basis. Check piping isometrics along with Bill of Materials (BOM) to ensure accuracy, connectivity with P&IDs, and compliance with Project Material Specifications (PMS) and the line list. Model small branches such as pressure indicators (PIs), temperature indicators (TIs), vents, and drains in conjunction with main pipes. Conduct interference checks to identify and resolve clashes between piping, equipment, and structures. Collaborate with senior officials and other disciplines to address piping and equipment-related issues and ensure seamless coordination. Identify and resolve layout issues to optimize design accuracy and efficiency. Prepare detailed piping route designs, ensuring compliance with industry standards. Perform pipe routing and support modeling to deliver robust and efficient systems. Model equipment and structural components using tools such as E3D, PDMS, and Plant 3D. Create detailed study drawings for both critical and non-critical piping lines. Analyze P&IDs, equipment layouts, and piping layouts to inform and refine designs. Qualifications: Minimum of 2 years of experience in piping design, preferably in industrial or plant environments. Proficiency in handling 3D scanning data and converting it into CAD models. Expertise in CAD software such as AutoCAD Plant 3D, PDMS, or equivalent tools. Experience with digital twin technologies is a strong advantage. Solid understanding of piping systems, materials, and associated codes (e.g., ASME, ANSI, ISO) Strong analytical, problem-solving, and communication skills. Preferred Skills: Proficiency in E3D, PDMS, and Plant 3D software. Strong understanding of piping design principles, material specifications, and industry standards. Expertise in interpreting technical drawings, P&IDs, and layouts. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities to effectively coordinate with multidisciplinary teams. Experience with digital transformation projects in manufacturing or industrial plants. Knowledge of sustainability and smart factory practices is a plus Note : Open to relocating anywhere in India based on client requirements. (Interested candidates can share their CV to aradhana@hungrybird.in or call on 9959417171. ) Please furnish the below-mentioned details that would help us expedite the process. PLEASE MENTION THE RELEVANT POSITION IN THE SUBJECT LINE OF THE EMAIL. Example: KRISHNA, HR MANAGER, 7 YEARS, 20 DAYS NOTICE Name: Position applying for: Total experience: Notice period: Current Salary: Expected Salary: Thanks and Regards Aradhana +91 9959417171

Exp on Creo CAD modelling in ProE Exp in 2D to 3D model conversion. Good knowledge Geometric Dimensioning Tolerancing (GD&T), Awareness to manufacturing processes Responsible for designing the parts on particular software Required Candidate profile Minimum 3 to 5 years in product design, product development or R&D environment in manufacturing industry. Exposure to SAP is added advantage Travel to Overseas on project requirement.

Support CNC team, create CAD models for offshore client. Develop programs in CAM software. Analyze drawings and adopt to new CAM environments. 2-3 years CNC experience, knowledge of 5-axis preferred. MasterCAM/CREO/NX/Cimatron/GibbsCAM/VISI/workNC